Responsibilities:

• To follow strict instituted workplace security policy at the customer premises.
• Provide Level 1 and Level 2 technical support, perform networking routing and switching problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem, escalate to next level of support, track and get the issue resolved within the specified time as agreed with the customer.
• Perform configuration change activities as per instructions & guidelines.
• Provide problem status to the Service Desk and/or update into the ticketing tool according to the Procedures Manual.
• Perform day-to-day Network operation for the Network Infra-structure and Network Equipment at the customer/IBM premises, including performance monitoring, bandwidth monitoring.
• Work with customer's vendor to perform testing and preventative maintenance according to the schedule provided by the customer for the Network Equipment
• Perform periodic OS upgrade and Patching as and when required.
• To perform 24X5 rotational 12 hours shift onsite availability and 24X7 standby / remote support availability as and when needed for critical incidents.
• Provide proactive incident reports for all Network related problems, faults, events.
• Respond to all fault calls inclusive of emails and other forms of communications for Firewall related issues and problems reported
• Provide multi-vendor equipment support across a wide range of models and types of networking equipment
• Perform security activities like hardening/periodic health check/ ID validation and other compliance activities as per customer’s security policies and standards.
• Maintain/Update IT hardware and software inventory list and compliance related databases or similar Databases.
• Maintain the device inventory list for the customer when needed, Maintain the software/firmware for all the devices up to date. Maintain the inventory of certificates/license file and install/update/renew certificates/licenses as and when required.
• Subscribe to vendor notifications for the managed devices for vulnerabilities and review/validate/apply security patches pro-actively.
• Perform device activation / deactivation as per customer’s service activation and deactivation process.
• Maintain the IP address inventory and allocate new IP address when required by business.
• Engage third part vendors to resolve hardware issues and follow up till closure
• Monitor vendor End of Life / End of Support notifications for all In Scope Devices and inform the client.

Requirements:

• Diploma or Bachelor’s degree in in Information Technology, Computer Science, Engineering or equivalent.
• At least 5 years work experience providing Level 1 and Level 2 networking technical support in a 24x5 Network Operation Center environment.
• Must be able to work on 12 hours rotational shift on a 24X5 onsite and 24X7 standby / remote support team setup.
• CCNP certification preferred.
• Expert level knowledge in implementation and maintenance of Cisco Routers and Switches of all series.
• Good knowledge in Cisco IOS
• Good knowledge in implementation and operations support of NAC (network access control)
• Good knowledge in Aruba Clear Pass / Cisco ISE
• Good knowledge in Wireless Network / Access Points / Controllers support and troubleshooting
• Expert level understanding of the OSI or TCP/IP model
• Hands-on experience with monitoring, network diagnostic, Packet Tracers and network analytics tools
• Good knowledge on Firewall Products like Cisco ASA, FortiGate, Palo Alto, Checkpoint
• Good knowledge on Aruba ClearPass/Cisco ISE, Cisco wireless controllers
• Knowledge on F5 load balancers.

Job Description

• Industry/ Organization Type: IT / Software
• Position Title: Desktop Support Engineer (L1 / L2)
• Working Location: West (Jurong / Tuas)
• Working Hours: 5 days (Monday to Friday, 8 AM – 5 PM)
• Salary Package: Basic Salary up to $3,300 + AWS + Bonus + Transport Allowance
• Duration: Permanent Role

Key Responsibilities

• Provide first/second level contact and problem resolution for customer issues.
• Work with Third Party Vendors to remediate complex AV issues as needed.
• Provide timely communication on issues status and resolution.
• Maintain ticket updates for all reported incidents.
• Install, upgrade, support and troubleshoot XP, Windows 7, Windows 8.1, Windows 10 and Microsoft Office 2010, Cisco Jabber, another authorized desktop application.
• Should have basic knowledge of Mac operating system to support Apple PC users.
• Install, upgrade, support and troubleshoot for printers, computer hardware.
• Performs general preventative maintenance tasks on computers, laptops, printers.
• Performs remedial repairs on Desktops, laptops, printers and any other authorized peripheral equipment.
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software.

APPLY NOW!!!

• Bachelor’s degree or equivalent in Computer Science or related field
• Minimum 1 year of IT experience or equivalent
• Candidates with CompTIA A+, Microsoft Certified Professional (MCP) qualifcations or equivalent would be an added advantage
• Broad experience in IT with basic understanding of Networks, Servers, Audio/Visual, Smart Devices and Telecoms
• Experience with Windows 7-10, Microsoft Active Directory, utilization GPOs, MS Office 365, PC hardware installation and troubleshooting, Enterprise anti-virus solutions or Helpdesk ticketing systems is preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66041 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: IT / Software
• Position Title: Desktop Support Engineer (L1 / L2)
• Working Location: West (Jurong / Tuas)
• Working Hours: 5 days (Monday to Friday, 8 AM – 5 PM)
• Salary Package: Basic Salary up to $3,300 + AWS + Bonus + Transport Allowance
• Duration: Permanent Role

Key Responsibilities

• Provide first/second level contact and problem resolution for customer issues.
• Work with Third Party Vendors to remediate complex AV issues as needed.
• Provide timely communication on issues status and resolution.
• Maintain ticket updates for all reported incidents.
• Install, upgrade, support and troubleshoot XP, Windows 7, Windows 8.1, Windows 10 and Microsoft Office 2010, Cisco Jabber, another authorized desktop application.
• Should have basic knowledge of Mac operating system to support Apple PC users.
• Install, upgrade, support and troubleshoot for printers, computer hardware.
• Performs general preventative maintenance tasks on computers, laptops, printers.
• Performs remedial repairs on Desktops, laptops, printers and any other authorized peripheral equipment.
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software.

APPLY NOW!!!

• Bachelor’s degree or equivalent in Computer Science or related field
• Minimum 1 year of IT experience or equivalent
• Candidates with CompTIA A+, Microsoft Certified Professional (MCP) qualifcations or equivalent would be an added advantage
• Broad experience in IT with basic understanding of Networks, Servers, Audio/Visual, Smart Devices and Telecoms
• Experience with Windows 7-10, Microsoft Active Directory, utilization GPOs, MS Office 365, PC hardware installation and troubleshooting, Enterprise anti-virus solutions or Helpdesk ticketing systems is preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66041 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Perform end user IT Support
• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

We are seeking a highly skilled and motivated individual with expertise in MS SQL, PowerShell, C++, Unix Scripting, REST API development,. The ideal candidate will contribute to developing, implementing, and maintaining robust solutions tailored to our business needs.

Key Responsibilities:

• Design, develop, and maintain MS SQL databases, ensuring efficient data storage and retrieval. Perform database optimization, query tuning, and management of large-scale data sets.
• Develop and maintain PowerShell scripts to automate repetitive tasks, system monitoring, and report generation. Ensure smooth integration between different systems and platforms.
• Write high-performance, maintainable, and scalable code using C++.
• Develop scripts for managing and automating server tasks, ensuring reliability and optimal performance of systems.
• Design and implement RESTful APIs, ensuring seamless communication between services and applications. Develop efficient and scalable solutions in line with modern development standards.
• Troubleshoot and debug complex technical issues, identifying and applying solutions timely.
• Maintain clear and up-to-date documentation for all developed systems, scripts, and APIs.

Requirements:

• Min 5+ Years of experience of Software Engineering
• Proficiency in MS SQL for database management and development.
• Hands-on experience in PowerShell scripting for automation.
• Strong knowledge of C++ programming and object-oriented design.
• Expertise in Unix Scripting for server management.
• Familiarity with REST API architecture and development.

ONSITE JOB PROFILE

a) Support the client in production / industrial engineering activities throughout the product realization activity

b) Study the Project requirements

c) Study the Concept design, development and production support of “tooling equipment” like Jigs and fixtures by employing ‘Computer Aided Design’ (CAD), for all components

d) Understand the Feasibility evaluation and testing of the tooling equipment

e) Prepare“3D CAD models” for the components in confirmation with the client’s standard operating procedures and practices for each production process.

f) Coordination of ECO (Engineering Change Orders) activity as per manufacturing customer’s standards and procedures through the use of SAP tools.

g) understanding and familiarization of the customer’s product and process requirements and training the delivery support team accordingly..

REQUIRMENTS TO PERFORM THE JOB DUTIES

h) Bachelor of Engineering / Technology (B.E. / B. Tech: equivalent to BS/ Diploma) in Mechanical Engineering.

i) 2-4 years of experience in CAD and ECO coordination.

j) Knowledge of Solidworks software is required.

k) Desire for continuous education and training effort.

l) Excellent written and verbal communication skills and ability to interact with all levels within engineering organization.

Responsibilities :

• Support the technical team and construction team for all design matters.
• Review all technical documentation and drawings of the Project works.
• Work closely with consultant on the scope of services, design and project deliverables to enhance site efficiency and constructability.
• Manage design approval process and coordination with the clients, consultants and subcontractors in a timely manner to resolve all technical issues.
• Ensure strict compliance of the design in accordance with contractual requirements.
• Identifies and highlight to management and project team of any potential risks or issues that will impact project performance.
• Support tender team and prepare technical tender documents as per specifications for bidding of civil and structural engineering projects as when assigned.

Requirements :

• PE Board Recognised Degree in Civil Engineering
• Minimum 5 years of design management experience with at least 1 year of design experience in consultant firm.
• Strong coordination and collaboration with other disciplines.
• Good interpersonal and communication skills .
• Good organization and time management skills.

• Supports the technical team and construction team for all design matters.
• Reviews all technical documentation and drawings of the Project works.
• Works closely with the Consultants on the designs and project deliverables to enhance site efficiency and constructability.
• Understands and familiar with Authority approval/clearance of works including URA, BCA, LTA, PUB, etc.
• Manages design approval process and coordinates with the Clients and Consultants in a timely manner to resolve all technical issues.
• Ensures strict compliance of the design in accordance with contractual requirements.
• Ensures the distribution of all the approved and latest drawings and other relevant documents to the relevant parties.
• Prepares shopdrawings with in-house BIM team and obtains approval in advance to site installation dates.
• Raises queries to Client or handles Client’s clarification on technical requirements pertaining to the Project works.
• Prepares and presents design progress status and slides to KTC management, project team and Client as and when required.
• Strong coordination and collaboration with other disciplines (i.e. Architectural, MEP, BIM, etc.) on design to ensure delivery of high quality outcome.
• Supports tender team and prepares technical tender documents as per specifications for bidding of civil and structural engineering projects as and when assigned.
• Attends Technical Meetings, Coordination Meeting, Site Meetings, etc as and when required.

Job Responsibilities:

• Offer technical support and assistance for incoming queries and issues related to desktop support, mobile device management, and video conferencing.
• Install and configure new IT equipment, conduct PC refreshes, set up new hire equipment, manage PC relocations, and handle the retirement and collection of devices due for decommissioning.
• Ensure proper drive wiping, maintaining chain of custody, and managing inventory.
• Resolve incidents and perform software and hardware upgrades.
• Install new hardware for clients, including monitors, docking stations, and keyboards.
• Accurately record, update, and document requests through the IT service desk system.
• Maintain professionalism while addressing service delivery and client issues in a timely manner.
• Evaluate customer-reported issues and determine the most effective solution.
• Identify and promptly escalate business and technical challenges as necessary.

Requirements:

• Minimum Diploma or Degree in Computer Science/Information Technology, or a related field.
• 2-3 years of deskside support experience
• Capable of working independently with minimal supervision.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Nyon Hock Sen
EA Personnel Reg No: R24124070

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• Lead and guide software delivery teams to implement solutions.
• Analyze project requirements, Design and develop software systems and applications to meet customer's needs.
• Work with Project Manager and stakeholders to ensure timely and successful delivery of the project scope within timelines
• Serve as a technical advisor to the development team, offering troubleshooting support and driving issue resolution.
• Prepare and maintain technical documentations and design plans
• Provide System Enhancement Recommendations such as modifications or upgrades to existing software systems and applications to enhance performance.
• Ensure compliance with industry standards, regulations, and best practices (e.g. SGTS, GCC, IM8, etc.)

Requirements

• Experience in infrastructure architecture (on-prem/cloud), database architecture and networking
• 5-8 years of experience in software, systems design and implementation.
• Experience in pre-sales consulting would be added advantage
• Experience as a Solution Architect would be a plus
• Proficiency in software development languages such as Java, Python, C++, or others

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all works including all civil and architectural works, plumbing, sanitary, drainage, irrigation and sewer system, commuters facilities, road works, trial trenches and utilities diversion etc.
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems systems and gantry crane and submit evaluation report endorsed by a PE
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works associated to micro-tunneling and mining, Flyover works, sewer diversion (including shaft construction and pipe-jacking operations.

Requirements:

• Diploma or Degree in Civil and Structural Engineering
• At least 4 years’ of experience, of which 3 years experience in either geotechnical works or airport construction.
• Possess a valid RTO cert by IES Singapore

Responsibilities:

• Support and assist the SRE / RE / RA in duties, review all project drawings and specifications, and raise any discrepancies and/or possible problems before construction work commence on site
• Supervise the construction and related works, maintain quality control and ensure that the works are carried out in accordance with the project specifications, drawings
• Report to the supervising Qualified Persons any work that are not constructed according to the building approved plans, project drawings including shop drawings;
• Report to project manager and/or project consultants any work that are not constructed according to the specifications and drawings;
• liaise with the supervising Qualified Persons and their engineers/architects / specialists on the review and approval of revised designs, amended drawings, specialist drawings, sketches, etc.
• Assist in the review of contractor’s method statements and working procedures, and to ensure that they are followed on site;
• verify progress payment claims, all other claims and reports submitted by the contractors;
• keep and review records of works including materials, samples, site equipment, inspections, test reports and ensure proper documentation, keep track of all records and forms
• oversee the maintenance of the site office, its cleanliness and orderliness, proper filing systems, plans

Requirements

• Diploma in Mechanical Engineering or equivalent from Singapore Polytechnic or other tertiary institutions of equivalent standing; and
• Possess at least 5 years of relevant and practical experience on site.

Our client is a well established MNC who is a global leader in engraving technologies. Their sales office is located at KAKI BUKIT area (walking distance from Kaki Bukit MRT). They are currently looking for a PRODUCT SUPPORT ENGINEER to join their team.

Basic salary: up to $4000
Work Location: Kaki Bukit (near Kaki Bukit MRT)
Work Days: 5 Days, 8.30am - 5.30pm

Responsibilities:

• To support the sales team with on-site or remote demonstrations, installation / training / reparation of the product scope under service responsibility throughout the entire region.
• Provide online, remote, or on-site demonstrations or testing of the supported solutions and installation/training
• Become a participant in sales team training courses and train sales personnel on-site to improve the effectiveness of their exploration actions
• Collaborate with sales representatives to participate in organizing sales activities to achieve established revenue and profit targets (exhibitions, roadshows, phone and on-site exploration, potential customer follow-up, etc)
• Weekly reports may affect the company's business positioning activities and market development (customer needs, standards, competition, etc)
• Maintain a high level of market, technical, and product knowledge by attending company training courses
• Monitor changes in market application demand

Requirements:

• At least a Diploma in Engineering fields
• At least 5 years of commercial experience in selling or supporting industrial equipment (ideally CNC and/or Laser).
• Local & ASEAN travelling required
• Proficient in MS Word, Excel, CRM software and CAD/CAM software
• Good command of verbal and written English

Please submit your resume in MS Word format to [email protected]

Please remember to include your
1) Recent photo

2) Current salary & Expected salary
3) Notice period

UNITED PERSONNEL SERVICES

21 Bukit Batok Crescent,

WCEGA Tower #11-74,

Singapore 658065

Tel: +65 6562 2321

www.united-personnel.com

Registration No: R1103478

EA Licence Number: 05C5278

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates would be notified)

Roles & Responsibilities:

· Collaborate with stakeholders to elicit, document, and prioritize business requirements related to payment systems.

· Analyse and translate business needs into functional and technical specifications.

· Work closely with development teams to design and implement File conversion requirements using the mapping specifications.

· Act as the primary liaison between business units, IT teams, and external vendors to ensure alignment and clear communication.

· Support User Acceptance Testing (UAT) by preparing test cases, validating results, and ensuring defects are resolved.

· Make changes to ANSI x12 and EDIFACT map

· Ensure delivered solutions align with business objectives and user expectation

Conduct workshops and presentations to gather feedback and validate requirements.

· Build and maintain strong relationships with key stakeholders to foster trust and collaboration.

· Encourage a collaborative and inclusive work environment that promotes knowledge sharing and teamwork.

Mandatory Skills:

· Knowledge of ISO 20022 messaging standards.

· Knowledge of Boomi Integrations

· Knowledge of APAC Payment types

Requirements:

· Bachelor’s degree in business administration, Finance, Computer Science, or a related field.

· Minimum 5+ years of experience as a Business Analyst, preferably in the payment banking domain and Industry Standards ANSI X12, EDIFACT

· Strong knowledge of payment systems, including TT, FAST. GIRO and other digital payment solutions.

· Proficiency in tools like JIRA, Confluence, MS Office, and process modelling software.

· Handson Experience in Communication Protocols AS2, FTP, FTPS, SFTP, HTTP, FSA etc.

· Handson and minimum 5 years’ experience in EDI Software’s like Sterling Integrators, GHX, SAP, Dell Boomi.

· Good Knowledge in Prototyping Tools Axure RP 8, Balsamiq and IO Draw with Mapping Tools SI Map Editors (8.0)

· Experience with agile and waterfall project management methodologies.

TECHNICAL MANAGER Duties and Responsibilities:

• Serve as the technical expert for detailed design and construction aspects of the project

• Answer questions and resolve issues brought forth by the internal team members, client, consulting engineers and contractors

• Perform expediting actions in sourcing technical information, submission of data/method statement for installation, delivery and transport of materials/equipment, storage and issuance for site installation works

• Prepare detailed installation plans, methodology, processes and procedures for support of construction team

• Propose and oversee timelines for engineering proposals and submissions are met

• Check and confirm the accuracy of submissions from contractors, vendors and suppliers for the work to be performed, coordinate and ensure approvals are received from client in timely manner

• Set up procedure and processes in monitoring and tracking of engineering related documentation throughout project lifestyle

• Communicate and collaborate with other managers, suppliers, and contractors

• Prepare and deliver various installation/erection or construction related presentations, both internally and externally

Requirements and Qualifications:

• Analytical and mathematical mind, capable of evaluating and solving various complex problems

• Leadership skills necessary to manage and develop a teamwork ethics

• Organizational competencies and project management skills to keep project, processes, and the entire engineering tasks on track

• Self-motivated attitude with the ability to multitask and thrive in a timeline-driven environment

• Interpersonal communication skills with expertise in distilling complicated topics to a broader audience

• Ability to work independently as well as part of a team

TECHNICAL MANAGER Duties and Responsibilities:

• Serve as the technical expert for detailed design and construction aspects of the project

• Answer questions and resolve issues brought forth by the internal team members, client, consulting engineers and contractors

• Perform expediting actions in sourcing technical information, submission of data/method statement for installation, delivery and transport of materials/equipment, storage and issuance for site installation works

• Prepare detailed installation plans, methodology, processes and procedures for support of construction team

• Propose and oversee timelines for engineering proposals and submissions are met

• Check and confirm the accuracy of submissions from contractors, vendors and suppliers for the work to be performed, coordinate and ensure approvals are received from client in timely manner

• Set up procedure and processes in monitoring and tracking of engineering related documentation throughout project lifestyle

• Communicate and collaborate with other managers, suppliers, and contractors

• Prepare and deliver various installation/erection or construction related presentations, both internally and externally

Requirements and Qualifications:

• Analytical and mathematical mind, capable of evaluating and solving various complex problems

• Leadership skills necessary to manage and develop a teamwork ethics

• Organizational competencies and project management skills to keep project, processes, and the entire engineering tasks on track

• Self-motivated attitude with the ability to multitask and thrive in a timeline-driven environment

• Interpersonal communication skills with expertise in distilling complicated topics to a broader audience

• Ability to work independently as well as part of a team

Technical Programmer |

Responsibilities:

• We are seeking a highly skilled and motivated individual with expertise in MS SQL, PowerShell, C++, Unix Scripting, REST API development,.
• The ideal candidate will contribute to developing, implementing, and maintaining robust solutions tailored to our business needs.

Key Requirement:

• 3 to 5 Years of experience In field of Software Engineering
• Proficiency in MS SQL for database management and development.
• Hands-on experience in PowerShell scripting for automation.
• Strong knowledge of C++ programming and object-oriented design.
• Expertise in Unix Scripting for server management.
• Familiarity with REST API architecture and development.

Interested candidates, please send your CVs on [email protected]

Regret to inform that only shortlisted candidates will be notified.

CEI: R1988671

EA License: 14C7275

Job Description

• Industry/ Organization Type: Accounting Firm (Global)
• Position Title: Audit Manager (Technical & Training)
• Working Location: Central
• Working Hours: Monday – Friday (8:45 AM – 5:30 PM)
• Salary Package: Up to $8,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Assist with reviewing client/audit team working papers on the appropriateness of asset/ liability carrying amounts measured using fair or recoverable values.
• Perform independent valuations for businesses, intellectual property, financial instruments, etc.
• Conduct market and industry research.
• Construct and analyze financial models.
• Develop financial models and establish best practices, workflows, and procedures in related areas.
• Perform financial modelling and forecasting using various methods and tools.
• Review valuation reports for inaccuracies.
• Identify gaps in valuation reports and suggest improvements.
• Understand and apply financial reporting standards; pose relevant challenges and questions on key inputs and assumptions used by management.
• Guide the team in amending reports to clearly articulate valuation conclusions.
• Engage in technical research and consultations, including writing technical publications, reviewing and developing technical working paper templates and training materials, and facilitating/conducting technical training sessions.
• Review and develop training programs, coordinate and conduct training, and monitor CPE hours for audit professionals.
• Participate in other ad-hoc projects as required.

APPLY NOW!!!

• Bachelor’s Degree in Accountancy or equivalent professional qualification.
• At least 5 years of audit experience, preferably from an international public accounting firm.
• A demonstrated deep passion for specialization in technical research and professional training.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67105 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• Central-North location
• 5 days work week
• $7,500 - $13,000 + Variable bonus
• Excellent career progression
• Attractive employee welfare benefit
• Regional projects spanning from Singapore to China, Bhutan, and Cambodia.

Responsibilities:

Reports directly to the Managing Director. You are to serve as Qualified Person and manage a team of engineers to ensure safe structural design and excellent delivery of service to clients.

• Serve as Qualified Person (QP) and responsible for PE endorsement for projects assigned
• Responsible for the profitability and cost efficiency of your team
• Project coordination/management
• Lead projects and attend meetings
• Supervise and inspect construction works.
• Managing and supervising technical/site staff and administrative functions of the projects.
• Provide guidance and manage engineers in the team to ensure on-time and accurate delivery of service.
• Check critical design calculations and specifications of the project prior to approving all C&S related documents and drawings produced in the projects prior to submission to regulatory authorities.
• Able to be hands-on to carry out detailed analysis and design of civil, structural, and geotechnical works
• Able to be hands-on in preparing design calculation reports and structural drawings for authorities' submissions;
• Able to coordinate with various stakeholders such as clients, consultants, and contractors for projects

Requirements:

• Degree in Civil/Structural Engineering or its equivalent
• Local design experience in C&S engineering work & conversant with Singapore Building Codes and Practices
• Familiarity with engineering software (e.g. Tedds, StaadPro, Prota, Etab) and submission procedures to regulatory authorities
• Strong report writing skills to prepare and furnish reports
• Registered with Singapore PE Board as Professional Engineer
• Willing to sign as signing QP

We regret that only shortlisted candidate will be notified.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898

• Handle customer inquiries and technical issues via phone, email, chat, or ticketing system to provide quick and polite assistance.
• Solve technical problems reported by customers or users using troubleshooting skills for software, hardware, or network issues.
• Work with development and product teams to resolve complex issues and keep stakeholders updated.
• Meet SLAs for response times and resolutions, ensuring requests are handled on time.

Requirements:

• Diploma in Cyber Security or equivalent.
• At least 2 years of relevant working experience.
• Good knowledge of computer systems, networks, troubleshooting, and key protocols like TCP/IP and DNS.
• Comfortable to work 24x7 standby shifts.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

UnaBiz is the leading IOT company in Singapore. HQ in Singapore, with office in Taiwan, Japan, France, Spain and providing IOT solution globally.

Join the company that supplies solutions to established local / MNC like SIA, CBRE, JLL, Shiseido, TotalEnergies, Certis, Engie, and many more!

Job Descriptions:

• Execute sales strategies to penetrate the target market and expand the customer base.
• Conduct presentations and demonstrations that showcase the features and benefits of our smart workspace solutions.
• Manage relationship with clients to understand their unique needs and tailor solutions that align with their business objectives.
• Work closely with technical experts to design customized solutions that address client challenges.
• Provide regular updates on sales activities, pipeline, forecasts, and performance metrics to senior management.

Job Requirements:

• Candidate must possess at least Diploma/Bachelor's degree in Business, Marketing, or a related field.
• Experience in hospitality would be an added advantage
• Self-motivated and results-oriented, with a proactive attitude toward problem-solving.
• Willingness to travel locally for client meetings and industry events as required.
• Highly motivated, resourceful, and independent worker who is proactive and customer-focused.
• Fresh graduatesare welcomed!

Rewards:

• Opportunities for career advancement
• Free lunch in office provided
• Free transport to/from office

1. development of new repair project

2. supervise engineers' work & train engineers to improve their skill

3. report to management

4. at least bachelor graduation

5. at least 20 years of experience

6. Fluent English and Korean

7. strong technical back ground

8. design jig and test batch to confirm repair work

• Bachelor degree in Civil Engineering or related equivalent
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/departmen
• Required skill(s): MS Office, preferable candidate skills
• Minimum 2 years Site/Working Experience

Responsibilities:

• Clerical duties and general administrative support
• Attend to phone calls, queries and emails
• Develop and maintain filing system
• Preparation of legal documents (training will be provided)
• Carry out simple payments, invoicing and receipts functions
• Archival of both digital and hard-copy documents

Requirements:

• Proficient in Microsoft Office and Outlook
• Organized and detail-oriented
• Strong customer service and communication skills