Job Title: Service Technician (ID8234)
Location: Lakeside, Singapore
Working Hours: Mon-Fri: 9AM-6PM
Salary: $2200 - $3000

Job Description:
Arrange logistics and prepare tools for component replacement or repair work, calibration, and servicing of safety-related equipment.
Perform maintenance, servicing and calibration of safety-related equipment
Carry out preventive maintenance in accordance with preventive maintenance schedule.
Comply with Workplace Safety and Health (WSH) policies, procedures and regulations when carrying out work.
Create work orders to document repairs.
Highlight areas of non-compliance to supervisor for follow-up.
Monitor status of equipment after repairs.
Propose workflow improvements to improve efficiency.
Reinstate machine and equipment back to operation to reduce downtime.
Schedule equipment for repair, fault finding and troubleshooting.
Ensure servicing area is clean and tidy at all times.
Any other ad-hoc tasks as and when assigned by Management.

Requirement:
Able to work effectively and efficiently individually and in a team
Candidate must possess at least Secondary School/"O" Level or equivalent
Possess valid class 3 driving licence
Good eyesight and familiar with roads in Singapore
Hardworking, responsible and self-driven
Physically fit and positive working attitude

A*STAR Infectious Diseases Labs (A*STAR IDL) is seeking a Laboratory Officer/ Technician (BSL-3 operations) to join us.

The Laboratory Officer/ Technician will engage in day-to-day operations, housekeeping, maintenance of the high containment (BSL-3) and BSL-2 enhanced laboratories. This role will involve but is not limited to the following:

Job Responsibilities:

• Perform lab biohazard waste collection, sort, autoclave, and safe disposal.
• Liaise with biohazard waste contractor for scheduled disposal.
• Manage laboratory supplies, chemical and equipment inventory.
• Assist in coordination of the lab maintenance, calibration, repair of faulty and recertification of laboratory equipment.
• Coordinate with vendors and service providers to ensure timely delivery of lab supplies and stock checking.
• Track and manage personal protective equipment (PPE) inventory, perform regular checks, and replenish stock as needed.
• Maintain overall cleanliness and organization of the laboratories.
• Able to carry loads such as lab laundry and send for cleaning, drying and redistributing to storage cabinet.
• Perform ad-hoc duties as required to facilitate smooth and efficient operation of the lab.

Job Requirements:

• "N" Level/"O" Level/ITE/NITEC/Higher NITEC/Diploma.
• Minimum 2 years working experience in a BSL-2 laboratory setting.
• Experience in a high containment environment will be advantageous.
• Team player, proactive and possess good communication skills.
• Ability to work independently under minimal supervision.
• Able to wear PPE and don respirator to perform daily work.
• Knowledge of biohazard waste management and autoclaving procedures.
• Familiarity with research animal facility housekeeping.
• Attention to detail and strong organizational skills.
• Willing to learn and ability to follow strict safety protocols and guidelines

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Summary:

• Basic Salary $2500 - $3300
• 5 day work
• Mondays to Fridays, (7.30am - 4.30pm/4pm to 1:30am)
• Location: Changi
• AWS,Variable Bonus

Responsibilities:

• Utilizes routine work, schematics, wiring diagrams, parts and wire lists, written and/or verbal instruction to build, repair and/or test electrical, electro-mechanical, vacuum, pheumatic assemblies, subassemblies and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies, and components. Enters data on computer terminal, such as progress, work expenses and labor details. May perform computer programming, repair or software installs.
• Details finished work. Receives parts and perform audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Eng Eu Yun (Charice)

Registration Number: R1878635

EA Licence No: 06C2859 (MCI Career Services Pte Ltd)

Responsibilities:

• Perform a variety of Chemistry testing and ensure that all incoming samples are tested and completed on time using the appropriate sampling procedures, test methods and other good laboratory practices along with the proper reporting and maintenance of records
• Maintain a proper understanding of Chemistry techniques and test methods
• Operate, maintain and trouble-shoot laboratory equipment
• To actively engage the supervisor/team leader of all “out-of-spec” results, analytical issues or any other problems encountered
• To uphold the scientific integrity and professional reputation of both themselves and that of the laboratory and exercise professional judgement and seek advice from the senior staff in difficult issues
• To ensure all quality control procedures are in place along with identifying and reporting any quality issues
• To ensure that all laboratory corrective actions are carried out and completed in time with root causes identified and to follow the appropriate preventative measures implemented by the supervisor or team leader
• To report all customer complaints/concerns to the team leader or the laboratory manager followed by the appropriate course of action as instructed
• Participate and contribute to health and safety continuous improvement initiatives. Report all incidents, including near misses, whether or not these incidents involve actual consequences, ensure safe work practices are followed, and proactively promote safe behaviour and injury prevention. Participate in training and working safely including the proper use of safety equipment. Ensure safety at work is top priority

Requirements:

• Possess minimum Diploma in Chemistry or related discipline
• Minimum 2 years of relevant working experience in food testing laboratories
• Good chemistry knowledge, good instrument skills, e.g. HPLC, GC
• Possess work experience in similar or within an accreditation/ certification industry will be an advantage

Only shortlisted candidates will be notified.

❤️❤️❤️❤️❤️❤️❤️❤️❤️

Job: Manicurist / Nail Technician / Eyelash Beautician / Embroidery Beautician

Salary Info:

✅ Salary $3000-$5000 (Basic + Commission)

✅ $2000 Sign-on Bonus (Start working before January)

✅ Annual Bonus

Job Info:

✅ 1-2 Rest Day(s) per Week

✅ Working Hours 10am-8pm/11am-9pm

✅ Public Holidays Off-in-Lieu

✅ Medical Benefits

✅ 7+ Days Annual Leave

✅ 14 Days Medical Leave

✅ 60 Days Hospitalisation Leave

❤️ Friendly Colleagues

❤️ No Stress No Pressure

❤️ Pleasant Working Environment

Location: Tampines (beside MRT)

Requirements:

➡️ Full-Time Role

➡️ Min 1 Year Experience in Manicure / Eyelash Extension / Eyebrow Embroidery

➡️ Experience in Multiple Services Preferred

➡️ Cheerful & Positive Personality

➡️ Willing to Learn New Skills

➡️ Singaporean / PR / LTVP / Malaysian (Work Permit)

Interested parties can WhatsApp +65 9485 7181

WhatsApp: https://wa.me/6594857181

➖➖➖➖➖➖

招聘： 美甲师 / 美睫师 / 纹眉师

薪水资料：

✅ 薪水 $3000-$5000 （底薪+佣金）

✅ $2000 加入奖金 （1月前开工）

✅ 年度花红

工作资料

✅ 每个礼拜1-2天休固定息日

✅ 工作时间 10am-8pm/11am-9pm

✅ 公共假期而外休假

✅ 医疗福利

✅ 年假 7+ 天

✅ 14 天病假

✅ 60 天住院假

❤️ 同事好相处

❤️ 没压力没烦恼

❤️ 轻松工作环境

地点： 淡滨尼 (地铁站旁边）

要求：

➡️ 全职

➡️ 至少1年美甲/美睫/纹眉经验

➡️ 样样都会会加薪 (美甲/美睫/纹眉等等）

➡️ 性格开朗

➡️ 有学习精神

➡️ 新加坡人/永久居民/家属准证/马来西亚人

有兴趣的可以 WhatsApp +65 9485 7181

WhatsApp: https://wa.me/6594857181

❤️❤️❤️❤️❤️❤️❤️❤️❤️

• Assist the Operations Manager/Executive & Building Supervisor on a day to day operations
• Attend to the breakdown of the air-conditioning system, plumbing and electrical issue
• Attend to complaints, calls and queries from tenants on operation related matters
• Troubleshoot some minor technical / facility problems
• Carry out preventive maintenance according to maintenance work schedule
• Conduct daily inspections (checklist)
• Recommend and suggest preventive maintenance or repair to the Operations Manager/Executive & Building Supervisor to minimize emergency breakdown of service
• Carry out joint inspections with the term service provider during the regular servicing
• Supervise to ensure that repair and replacement work are carried out properly by a term service provider or contractor in a timely manner
• To supervise & monitor term service providers & contractors to make sure they comply with workplace safety & health legislation, guideline & code of practice
• To sign off service provider service report
• To assist in Marcom events when necessary such as sound system & lightings
• To call & coordinate M&E breakdown with the service provider
• To inspect daily for units under fitting out during fit-out period and units under reinstatement
• Check the vacant unit/units which are taking-over or handing-over, to draw up technical / building specifications eg. to confirm the electrical / exhaust capacity, water & drainage provisions etc.

Mininium 3 years experience in maintenance, servicing and repairs of Domestic Transfer Pumps, Booster Pumps, Rainwater Sump Pumps, Overflow Sump Pumps and Ejector Pumps and the related Control Panels. Servicing and repairs of Domestic Water Tanks and Generator sets.

Possess Class 3 Driving Licence.

Speak and write Simple English

Able to work 6 days week.

Must be able to standby on 24 hours for activation of emergency by customers for No Water Supply, Low Water Pressure or dirty water.

Possess leadership skill.

Able to work with foreign migrants.

Product area

Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of Google platforms, we make Google's product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.

Job description

The Data Center team designs and operates some of the most sophisticated electrical engineering, mechanical engineering and HVAC systems in the world. Facilities Technicians at Google data centers operate, monitor and support physical facilities conditions. Some of these duties will include heating and cooling of air and water, power supply, generators, UPS systems, electrical distribution and control and monitoring systems. You regularly help inspect, maintain and repair various data center systems such as piping and non-critical electrical or mechanical system components). You provide daily assistance to senior technicians as you read blueprints/schematics, conduct tours of systems and assess their working order.

As an advocate for best practices, you develop creative approaches to reducing operational costs while improving overall data center efficiency. You ensure that environmental and safety standards are consistently met, identifying problems and making repairs quickly. In emergency situations or abnormal conditions, you manage data center performance issues and outages to minimize the recovery time from failures.

Qualifications

Job responsibilities

• Regularly inspect, maintain, and repair various data center systems such as piping and non-critical electrical or mechanical system components. Provide daily assistance to senior technicians as you read blueprints/schematics, conduct tours of systems, and assess their working order.
• Be responsible for the uptime and maintenance of water pumps and treatment systems, HVAC, UPS, generators, electrical distribution, and Control and Monitoring Systems.
• Develop creative approaches to reducing operational costs, whilst improving efficiencies. Operate, monitor, maintain, and respond to abnormal conditions in the data center facilities systems and equipment.
• Provide tracking and trending operational characteristics. Support startup, commissioning, and integration of new equipment and systems into facilities infrastructure.
• Follow the site’s environmental health and safety policies. Availability to work on shifts including nights, weekends, and holidays.

Minimum qualifications

• Associate's degree, trade school certification, verifiable training in a relevant technical field, or equivalent practical experience.
• 2 years of experience in data center facilities.
• Experience in HVAC, Electrical Maintenance, Electrical Safety, Electrical Systems, Electrical Infrastructure Systems, Mechanical Maintenance, Mechanical Infrastructure Systems, Generators.
• Ability to lift and move 50 lbs of equipment, work on platforms, ladders, and under raised floors.

Preferred qualifications

• 3 years of experience in controls/automation or the equivalent in a critical/ construction/ high tech environment.
• Experience in data centers, hospitals, hotel industry, power plants, HV electrical substations, or other mission critical facility maintenance and operational experience.
• Knowledge of electrical, mechanical, and controls systems, including: Feeders, Transformers, Generators, Switchgear, UPS systems, ATS/STS units, PDU/PMM units, Chillers, Air handling units and CRAC units.
• Knowledge of meters, devices, sensors, and troubleshooting utilizing standard hand tools, digital metering, or calibration/diagnostic equipment.

Job Title: QC Technician (ID9074)
Location: Tuas, Company transport provided at Lakeside MRT, Jalan Boon Lay & Pioneer Mall & Pioneer MRT
Working Hours: Mon to Fri 8.00am-5.15pm
Salary: $2000
Gross Salary: $2500-$2800 (Including OT)

Benefits:
*AWS with 7 days AL starting
*Company transport provided at Lakeside MRT, Jalan Boon Lay & Pioneer Mall & Pioneer MRT

Job Description
• To be involved in QA/QC incoming and outgoing inspection
• To be responsible of QA/QC data collection and data entry
• To prepare product’s labelling
• To in charge in monthly stock count
• To assist QA engineer for misc adhoc job

Requirement:
• Minimum 1-2 Years in QA/QC experience
• Saturday occasionally have to come to work – consider OT

What’s the role?

Shell is looking for individuals to own the process unit to which they are assigned and will be responsible for the operational activities on their unit, the standard and housekeeping of the unit, process isolation and decontamination and the control of maintenance work via Permit to Work (PTW).

• Display field leadership of personal and process safety, and environmental stewardship.
• Ensures adherence and understanding of policies, procedures and guidelines pertaining to health, safety, and environmental issues.
• Apply Blue Zone Barrier Thinking to job planning and hazard recognition and mitigation development.
• Be present on site for critical activities and Take 5 before every task.
• Display learner mindset and operational discipline and thoughtfully comply to the work processes and procedure in execution of core operational duties and work processes including Ensure Safe Production (ESP), PTW, process isolation planning and execution, housekeeping etc.
• Operate process units within the Production Area in accordance to Standard Operating Plan, Daily Operating Instructions, Production Team Lead’s instructions and supervision.
• Operate the plant in compliance to site Operating Procedures, Standing Instructions and site Health, Safety, Security, Environment procedures.
• Optimize plant operations within the Design-Operating-Window and the Integrity-Operating-Window.
• Perform proactive monitoring of the plant and equipment in accordance with ESP and unit specific requirements (as per Production Unit Tier 3 procedure and training workbooks).
• Contribute to keep process materials records and to maintain good housekeeping practices on process plant and in console areas.
• Safely execute minor maintenance activities (MMBO)
• Perform other related duties as required and instructed by senior colleagues.
• Manage plant upsets and abnormal conditions and subsequent troubleshooting including incidents/plant emergencies and subsequent follow-up.
• Perform initial troubleshooting of more challenging/abnormal issue/high risk task (e.g. valve passing, Loss of Primary Containment (LOPC)/test point or drain line choked etc.) and seek assistance when required.
• Proactively support peers from own/other clusters to deliver shift plan when need arises after completing of own duty.
• Report unsafe acts/conditions, near misses and incidents.
• Support shift 5 to understand the root cause of Product Quality/Design Operating Window/upset incident occur within the shift to capture and facilitate learning across shift.
• To deliver the shift plan and steer/targets safely and timely for their unit, in addition to keep unit operations safe and optimized in energy, margin and PQ.If an Authorized Gas Safety Tester (AGST), he/she conducts PTW issuance on unit, including oversight of critical activities, checks for interface across different field positions, i.e. potential incompatible activities. If not an AGST, he/she ensures that he/she has knowledge of all permits issued on their unit.
  Maintain rigor of work/procedure execution by having pre-execution discussion to surface any concern and remind each other about necessary precautions, and timely signoffs of procedures.
  
• Provide unit orientation and practical hands-on skill training to junior PTs/ PT new to the unit on field execution.
• Provide clear and concise information in shift report and a thorough handover to other shifts is conducted in accordance with ESP requirements for situational awareness, proper follow-up and work planning.
• Raise GSAP notifications for defects/maintenance issues with preliminary assessment of work order prioritization for the GSAP notification done based on SAP Business Warehouse (BWP) matrix.
• Create or review process isolation job packs (including de-oiling and decon) and support the execution of process isolation safely and timely to meet Operation Maintenance Coordinator (OMC)’s plan schedule, prepare and approve PTW, and assist in coordination of daily maintenance planning on their unit.
• For senior PTs, the incumbent is a practicing full AGST and will play an active role in helping to set process isolation, PTW, ESP and equipment care standards on their unit.
• Implement assigned operational controls identified in the HSSE Management Systems, Bowties, Hazard sheets and HRAs.
• Monitor the performance of process equipment in his/her process area and make corrections and normalize deviations from plan or escalate to Production Team Lead (PTL).
• Start up and shut-down any section of the process plant in accordance with laid-down procedures and as directed by PTL.
• Contribute in the preparation of shutdown lists, review of P&I (PEFS) diagram checks and produce sketches for process isolation job packs or plant changes.
• Inspects process equipment after completion of maintenance work, including independent check of internals of all equipment before box-up.

What we need from you

• Nitec/Higher Nitec in Chemical Process Technology or Diploma in Chemical Engineering / Chemical & Green Technology / Clean Energy;
• Minimum 3 years of relevant experience in chemical processing or oil refining / utilities e.g. steam boilers and Cogeneration for Process Units;
• Good understanding of Ethylene Cracker HoA (Higher Olefins and Aromatic, C4+) or Utility (Boiler, Cogen, Wastewater Treatment etc.) is an advantage.
• Able to operate DCS independently;
• WSQ Qualifications in workplace safety and health for process plants/manufacturing sites
• Mandatory HSSE competency requirement specifically on ACSSEW (confined space safety assessor);
• Qualified as a gas tester and/or confined space assessor;
• Flexible to perform both shift work and day-work, as well as overtime, when the need arises;
• Should possess the necessary pre-requisites to perform as an Auxiliary Fire Fighter (AFF) who may be called upon to participate in auxiliary firefighting training or in the event of emergency situations.
• Should also be prepared to be qualified as a First Aider.
• Strong problem-solving skills, good technical and process aptitude, and ability to remain calm and composed during emergency to make informed and risk-balanced decision are required.
• Newly graduated applicants are welcome to apply as we have a structured In-house training programme.

Where you fit in

Purpose of the Maintenance Technician (Instrument) is to carry out hands-on maintenance and coordinates maintenance work related to instrumentation in Production Unit (PU). The role assures that activities on the weekly schedule, emergencies or assigned non routine maintenance work are executed with quality and efficiency and in compliance to the site Health, Safety and Environment requirements.

Accountabilities include:

• Provide day-to-day hands-on maintenance/troubleshooting of instrument related matters in PU.
• Ensure compliance of engineering practices and assets with statutory obligations, Engineering Codes of Practices and Shell DEP standards.
• Review and communicate daily / weekly schedule assignments with workforce. Plan / execute / obtain resources, materials, services, and equipment for E and SB priority work repairs.
• Ensure compliance with HSSE standards, Monitor and feedback on the maintenance effectiveness process and take corrective action if required, GSAP administration of time sheets, service, purchase, and material orders. Lead in the timely daily maintenance schedule execution, E/SB work order planning, E/SB reviews, daily updates
• Liaise with/consults Operations, Technology, other Engineering and Procurement departments as part of the execution of jobs
• Initiate and plan to upgrade instrument systems before obsolescence and deteriorations beyond repair.
• Perform end of day schedule progress (percent complete, MCMP, TECO and approve actual hours)
• Ensure completion of QA / QC and condition reports. Field presence and supervisor of maintenance contractor (craft productivity and quality of work) for effective and efficient execution
• Manage the activities in the hard schedule, adopting small adjustments or deviations where necessary. Feedback jobs that roll-over into next week(s) to the scheduler. Identify risks for not achieving schedule and taking mitigating action, keeping maintenance supervisor / team lead informed. Feedback to maintenance planning and scheduling
• Timely request to operations for maintenance permitting Analyze and trouble-shoot instrumentation problems
• Update and maintain spare parts inventory
• Seek improvement in techniques, procedures and technology to improve reliability at minimum costs and within budget.
• Report and recommend improvement on recurring problems/breakdowns
• Involve in scheduled safety walkabout
• Assess the risk of all day to day jobs that is carried out Develop formal JOHAN with all relevant parties for jobs with medium and high risk
• Full compliance with LSR & Safety Rules at all times to achieve Goal Zero

What we need from you:

To be successful in this role, you will have:

• Minimum NITEC Level 2 certification in Instrumentation or Electronics or Electrical, or Diploma/Degree in Instrumentation or Electronics or Electrical
• 3-5 years of relevant experience in Instrument construction/ Maintenance in oil & gas, chemical/ petrochemical or related industries.
• Knowledge in basic control system and/or functional logic is an advantage.
• Proven ability to diagnose and troubleshoot instrument and control system malfunctions.
• Experience with calibration of industrial instrumentation.
• Understanding of control system principles (PLC, DCS) and communication protocols (OPC, Fieldbus, Modbus, HART, Vnet).
• Able to understand PID and have knowledge of instrumentation and control element
• Basic understanding of server system administration, including troubleshooting and maintenance procedures.
• SAP (GSAP) knowledge in Maintenance Module.
• Experience in field work interfacing and stakeholder’s engagement.
• Excellent communication, analytical, problem-solving, and troubleshooting skills.
• Self-motivated with a strong commitment to teamwork and collaboration and managing contractors and vendors.
• Able to work in Team environment as well as standalone when need arises.

Technician Responsibilities:

• Diagnose, troubleshoot and repair mobile devices;

• Quality control and testing of repaired devices to ensure full functionality. Resolve/manage customer inquiries;

• Able to interact positively with customers at the storefront and over the phone;

• Ability to multi-task between repairs and customer service;

• Other related duties as required;

• Maintain and use repair tools and equipment. Including software and in-store POS system to track repair tickets and inventory;

• Strategically plan the order of operations to ensure a successful repair;

• Provide estimates and quotes;

• Glass only replacement on Samsung and iPads;

• Microscopic Board work; component replacement Hand-solder SMT components,

• remove and replace thru-hole comp without board damage,

• solder wires and cables,

• Diagnosis, troubleshoot and repair mobile devices;

• identify assembly and documents issues;

• Repair logic board issues from water damage.

Requirements:

• Excellent knowledge of customer service best practice with previous experience;

• Ability to repair a variety of mobile devices (i.e., iPhone, Samsung, LG, Motorola, Sony, Huawei and OnePlus phone, and iPads.);

• Ability to communicate effectively with a wide variety of people in a professional manner, face to face, on the telephone and in writing;

• Knowledge of mobile devices including manufacturers, operating systems, and network service providers;

• Willing to work flexibly and with enthusiasm;

• Excellent organizational skills;

• Good attention to detail and ability to show initiative;

• Ability to demonstrate practical troubleshooting and problem analysis techniques;

• Ability to plan and prioritize your workload without supervision

Technician Responsibilities:

• Diagnose, troubleshoot and repair mobile devices;

• Quality control and testing of repaired devices to ensure full functionality. Resolve/manage customer inquiries;

• Able to interact positively with customers at the storefront and over the phone;

• Ability to multi-task between repairs and customer service;

• Other related duties as required;

• Maintain and use repair tools and equipment. Including software and in-store POS system to track repair tickets and inventory;

• Strategically plan the order of operations to ensure a successful repair;

• Provide estimates and quotes;

• Glass only replacement on Samsung and iPads;

• Microscopic Board work; component replacement Hand-solder SMT components,

• remove and replace thru-hole comp without board damage,

• solder wires and cables,

• Diagnosis, troubleshoot and repair mobile devices;

• identify assembly and documents issues;

• Repair logic board issues from water damage.

Requirements:

• Excellent knowledge of customer service best practice with previous experience;

• Ability to repair a variety of mobile devices (i.e., iPhone, Samsung, LG, Motorola, Sony, Huawei and OnePlus phone, and iPads.);

• Ability to communicate effectively with a wide variety of people in a professional manner, face to face, on the telephone and in writing;

• Knowledge of mobile devices including manufacturers, operating systems, and network service providers;

• Willing to work flexibly and with enthusiasm;

• Excellent organizational skills;

• Good attention to detail and ability to show initiative;

• Ability to demonstrate practical troubleshooting and problem analysis techniques;

• Ability to plan and prioritize your workload without supervision

You will assist in the preparation, distribution and inventory management of pharmaceuticals according to standard procedures. This includes packing, dispensing as well as replenishment of drug supplies. You will also be required to perform periodic stock counts and general housekeeping.

Requirements:

• Diploma in Pharmaceutical Sciences or Certificate in Pharmacy Technician Course;
• Able to perform shift duties including weekends and public holidays;
• Highly motivated team player with good communication skills; and
• Candidates with supervisory experience may be considered for senior position.

• Position : Service Technician (Chemical/Environment)
• Location : Jurong Island-Company transport provided at Choa Chu Kang/ Jurong East MRT station
• Working hours : Monday -Friday, 9.00am-6.00pm
• Salary (commensurate with experience): Up to $3400+ Site Allowance + 1 month completion bonus + 14 days annual leave + Medical reimbursement + 2 days Family Day
• Duration : 1 year contract - convertible or renewable
• Industry : Power Generation

Main Responsibilities:

• Operate water treatment Plants (Inclusive of Demineralization, Wastewater Treatment, Electro chlorination), Chemical dosing system for Boiler water treatment and sampling system
• Support the Engineer in Plant operation work and implementing Permit-to-Work system via safe isolation/ de-isolation of plant equipment
• Perform routine Plant check and laboratory analysis
• Ensure chemical safety and compliance with environmental regulations through site monitoring
• Assist in purchases for reagent, consumables and equipment maintenance

Requirements:

• Diploma in Chemical/ Environmental Engineering (or equivalent) with minimum 1-2 years of related experience in Utilities, Power, Petrochemical or Process Plant
• Candidate without experience with NITEC in Chemical/ Environmental Engineering (or equivalent) with minimum 2-3 years of related experience in Utilities, Power, Petrochemical or Process Plant are welcome to apply
• Willing to OT on weekend/ Public Holiday
• ALL WELCOME!!

Email to [email protected]

***We DO NOT charge our candidates any referral fee nor bind them with

any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Position : Service Technician (Electrical Engineer-Desalination/Water treatment)
• Location : Jurong Island-Company transport provided at Choa Chu Kang/ Jurong East MRT station
• Working hours : Monday -Friday, 9.00am-6.00pm
• Salary (commensurate with experience): Up to $3200+ Site Allowance + 1 month completion bonus + 14 days annual leave + Medical reimbursement + 2 days Family Day
• Duration : 2 year contract - convertible or renewable
• Industry : Power Generation

Main Responsibilities:

• Carry out inspection and maintenance of electrical equipment in Desalination Plant
• Perform troubleshoot and implement solution for safety and maintenance work
• Supervision of contractors and perform administrative duties to ensure high quality of work and comply to safe work procedures

Requirements:

• Diploma in Chemical/ Environmental Engineering (or equivalent) with minimum 1-2 years of related experience in Utilities, Power, Petrochemical or Process Plant
• Candidate without experience or NITEC in Chemical/ Environmental Engineering (or equivalent) with minimum 2-3 years of related experience in Utilities, Power, Petrochemical or Process Plant are welcome to apply
• Willing to OT on weekend/ Public Holiday
• ALL WELCOME!!

Email to [email protected]

***We DO NOT charge our candidates any referral fee nor bind them with

any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Title: QA Technician (ID4628)
Location: Tuas
Working Hour：4 days shift work, day shift or night shift
Day shift : Monday to Thursday 6.45am to 6.45pm
Night shift : Monday to Thursday6.45pm to 6.45am
Salary: Day Shift, $1800-$2400, Night Shift, $2300-$2500


Responsibilities / Duties / Job Description / Job Scope / Accountabilities
• Asssit the QA Executive in ensuring product quality are met and standards (ISO, Food safety) are properly implemented and updated.
• Conduct quality check (tests and inspections) for in-coming, in-process and out-going goods for all production lines and all products produced.
• Conduct sample testing for new product and/or trial for new materials
• Inspecting output samples using established procedures, such as comparing to standards, measuring dimensions and functionality tests.
• Checking that the assembly or production line adheres to standards and procedures and complying with legal and customer's requirements.
• Reviewing Proof sheets and specifications to compare to produced goods.
• Recording inspection results by completing reports, summarizing sorting results and input data into quality database.
• Monitor the use of equipment to ensure it is safe and discard any that does not meet requirements.
• Keeping measuring equipment operating accurately by following calibration requirements and highlights for repairs.

Secondary Responsibilities:
• O Level/Quality Management, Food Technology or equivalent
• Minimum 1 year experience in Quality Assurance role preferably from the packaging industry
• Knowledge of ISO9001:2015, HACCP and Food Safety Management System implementation.
• Basic knowledge of computer use (Word & Excel)

• Position : Lift Technician/Engineers (Class 3 Driving License Required) – Up to $3500
• Location : West - Pioneer
• Working hours : Monday to Friday | 8.15am to 5.30pm
• Salary (commensurate with experience) : Up to $3500 + AWS + 12 - 18 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Electronics Engineering

Main Responsibilities:

• Servicing, troubleshooting and repairing of residential home lifts, platform lifts, stairlifts, dumbwaiters.
• Other Ad-hoc duties assigned by supervisor

Requirements:

• Able to read circuit diagram
• Minimum of or NITEC Higher NITEC in electrical or electronics engineering
• Must possess Class 3 Driving license

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

PC Refresh Technician

We are looking for experienced junior and senior full-time PC refresh technicians to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Able to support off hours or require to perform ad hoc duties as and when needed
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences for junior level.
• At least more than 6 years of IT deskside support experiences for senior level.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Be proficient in the use of company tools.Perform housekeeping duties around the jobsite and Company premises.Capable of working at heights.Complete detailed Daily Work Report.WACEL Concrete or Soils, and Hazmat certifications desired.Observing, testing and sampling soils. aggregates, concrete and asphalt according to applicable standards.Quality control of work performed.Clean and maintain integrity of Company tools and equipment.Operate all Company equipment.Loading and unloading trucks.Preparing field reports and assisting with laboratory testing.Demonstrate an ability and willingness to learn all aspects of thermal/moisture protection. Daily interaction with clients and team members.Understand and demonstrate safe work practices. Interacting with contractors, clients, and GTA personnel to evaluate site conditions and participate in work progress meetings