Maintenance Technician

Responsibilities

• Servicing and repairing industrial cleaning equipment such as high-pressure jet, leaf blower, scrubbing machine, vacuum cleaner, battery operated cart and etc
• Inspecting and assessing the functionality of equipment
• Troubleshooting machineries breakdowns
• Conducting routine maintenance and safety checks
• Preparation and submission of maintenance reports
• Liaise with external vendors for necessary equipment repair
• Inspect and monitor quality standards of equipment / tools
• Perform asset tagging to ensure accountability of equipment
• Prepare inspection finding reports and communicate with internal staff / vendors on any faults, and follow up to ensure rectification
• Any ad-hoc assignments

Requirements

• Valid Singapore Class 3 Driving Licence
• Minimum 2 years of experience in similar capacity and relevant knowledge in electrical and mechanical.
• Good communication and organisational skills
• Basic computer and report writing skills.
• Good time management and planning skills
• Hands-On Physical work required
• Driving company lorry (manual)
• Working hours: 8am to 8pm (Monday to Saturday)

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer to be part of our Photolithography Equipment diverse team of talent.

What you will be working on:

• To assist the Engineers to sustain and improve process integrity and Cpk indices to meet operations goals
• Perform shift duties (12-hour shift) to support the running of production in the module module and ensure that process integrity for machines is in place for production
• Assist Engineers in the fine tuning of processes for production
• Assist in trouble-shooting process related issues and minimize the time lots are on hold
• Monitor qualified process using SPC and other statistical tools
• Assist Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Participate in QIT programs to improve productivity and output quality of the Module
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• 2 – 5 years working experience in electrical / electronics industry
• Fresh diploma holders will also be considered
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

❤️❤️❤️❤️❤️❤️❤️❤️❤️

Job: Manicurist / Nail Technician / Eyelash Beautician / Embroidery Beautician

Salary Info:

✅ Salary $3000-$5000 (Basic + Commission)

✅ $2000 Sign-on Bonus (Start working before January)

✅ Annual Bonus

Job Info:

✅ 1-2 Rest Day(s) per Week

✅ Working Hours 10am-8pm/11am-9pm

✅ Public Holidays Off-in-Lieu

✅ Medical Benefits

✅ 7+ Days Annual Leave

✅ 14 Days Medical Leave

✅ 60 Days Hospitalisation Leave

❤️ Friendly Colleagues

❤️ No Stress No Pressure

❤️ Pleasant Working Environment

Location: Tampines (beside MRT)

Requirements:

➡️ Full-Time Role

➡️ Min 1 Year Experience in Manicure / Eyelash Extension / Eyebrow Embroidery

➡️ Experience in Multiple Services Preferred

➡️ Cheerful & Positive Personality

➡️ Willing to Learn New Skills

Interested parties can WhatsApp +65 9485 7181

WhatsApp: https://wa.me/6594857181

➖➖➖➖➖➖

招聘： 美甲师 / 美睫师 / 纹眉师

薪水资料：

✅ 薪水 $3000-$5000 （底薪+佣金）

✅ $2000 加入奖金 （1月前开工）

✅ 年度花红

工作资料

✅ 每个礼拜1-2天休固定息日

✅ 工作时间 10am-8pm/11am-9pm

✅ 公共假期而外休假

✅ 医疗福利

✅ 年假 7+ 天

✅ 14 天病假

✅ 60 天住院假

❤️ 同事好相处

❤️ 没压力没烦恼

❤️ 轻松工作环境

地点： 淡滨尼 (地铁站旁边）

要求：

➡️ 全职

➡️ 至少1年美甲/美睫/纹眉经验

➡️ 样样都会会加薪 (美甲/美睫/纹眉等等）

➡️ 性格开朗

➡️ 有学习精神

有兴趣的可以 WhatsApp +65 9485 7181

WhatsApp: https://wa.me/6594857181

❤️❤️❤️❤️❤️❤️❤️❤️❤️

Test Execution:

• Perform mechanical, electrical, and functional tests on automotive components, assemblies, and vehicles.
• Conduct tests such as durability, safety, environmental (e.g., temperature, humidity), vibration, and performance evaluations.
• Ensure all test setups are accurate, safe, and meet the specified requirements for each test scenario.

Test Equipment Maintenance:

• Set up, calibrate, and maintain testing equipment and instrumentation, ensuring all tools and equipment are functioning properly.
• Troubleshoot and repair testing devices when necessary.
• Ensure that equipment is compliant with calibration and safety standards.

Data Collection & Analysis:

• Record test data accurately and systematically, ensuring proper documentation and reporting.
• Analyze results to identify trends, anomalies, or potential issues, providing detailed feedback to engineers and management.
• Assist in developing test plans and protocols for new products or systems.

Compliance & Quality Assurance:

• Ensure all testing is performed in compliance with internal standards, industry regulations, and quality guidelines (e.g., ISO, SAE, etc.).
• Support the Quality Assurance team in verifying product specifications and quality benchmarks.
• Assist in preparing test reports for internal reviews, regulatory compliance, and customer submissions.

Collaboration & Support:

• Work closely with engineers, designers, and production teams to provide insights and feedback on product performance.
• Assist in the identification and resolution of issues during the testing phase.
• Support continuous improvement initiatives to enhance testing processes and product quality.

Safety and Documentation:

• Follow all safety protocols and guidelines to ensure a safe working environment.
• Document and report any safety or technical issues encountered during testing.
• Maintain accurate records of tests performed, including results, methodologies, and deviations from standard procedures.

Assist in other related duties assigned by Manager as and when necessary.

Qualifications

• Minimum O/N levels or equivalent; An associate diploma or higher in a related field is preferred.
• Minimum 2-3 years of experience in automotive testing, quality control, or a related technical role.
• Demonstrated ability to read and interpret complex technical drawings, schematics, and blueprints with precision.
• Exceptional attention to detail and a high level of manual dexterity.
• Excellent communication skills and the ability to work collaboratively in multidisciplinary teams.
• Proven ability to maintain a clean, organized, and efficient work area.

Physical Requirements:

• Ability to sit or stand for extended periods, often in a fixed position.
• Excellent hand-eye coordination and manual dexterity.
• Capability to lift and move components and assemblies as needed (up to 20kg).

Other Information

Working Conditions:

• Work is performed in a high-precision manufacturing or laboratory environment.
• Use of personal protective equipment (PPE) as required.

Additional Requirements:

• Willingness to undergo continuous training and stay updated with the latest advancements in precision assembly techniques.
• Flexibility to work overtime or shift hours if required.
• Certification in relevant areas (e.g., IPC certification for electronic assemblies) is a plus.

Responsibilities:

• To provide on-site service of equipment sold
• To set up and install smart home devices
• To provide a weekly update on the jobs done to Manager
• On Site installation and commissioning co-ordination of smart home system, security system and autogate system
• Troubleshooting / maintain / servicing at clients’ premises
• Able to trace / rectify root cause
• Pro-actively support other tasks (including ad-hoc projects) as assigned
• Setup and install Smart Home Systems suchs as Google Home/Alexa systems
• Setup rules and logic for smart home system
• Install smart home devices such as BOSCH fridge, LG/Samsung TV, Sonos Sound system, Broadlink, Xiaomi, Mi Home etc.
• Setup Networking solutions within client's home
• Managing inventory and preperation for on site implementation
• Plan and solution for smart home solutions
• Plan and solution for networking solutions
• Plan and solution for CCTV solutions
• Engage & manage vendors for on site implementation

5.5 Days work week

Job Scope

1. Responsible for carrying building and equipment maintenance projects
2. Perform both corrective and preventive routine maintenance, through regular inspection and maintenance.
3. Implement and improve the existing ISO maintenance program and to ensure trouble free production, and ensure adherence to 5S principles
4. Assist in continuous improvement of existing processing and packaging technology, providing equipment expertise to trouble shoot performance issues.
5. Execute the tasks of overall upkeep of the whole building and facilities.

Requirements

• Electrical troubleshooting and mechanical setup skills
• Knowledge in DFMEA or other tools.
• PM skill in mechanical & electrical system

Interested may whatapps 84597671

• Able to read engineering drawings
• Able to set up individual tools for machine operation in CNC Milling Machine
• Work accordingly to production plans and to maintain operational efficiency
• Able to carry out in-process measurements and to maintain product quality
• To develop individual tooling for CNC Milling Machine
• To generate and load NC program to designated CNC Milling Machine
• Able to problem solve and to make decisions to decrease cycle times and to increase efficiency
• To woek accordinly to Production Plan and to maintain operational efficiency
• Will be responsible for CNC Production Team performance and CNC Milling process
• Monitor process/ machines and to troubleshoot and report any deviations to respective personnels or to Senior Manager
• To maintain cleaniness according to the Company's 5S policy
• Maintain continuity among working teams by documenting and communicating
• Has preferably CNC Milling Machine and Precision Engineering background
• Has relevant experience in the metal fabrication, semi-conductor industry

Summary:

• Semiconductor, cleanroom
• Gross up to 3k+ with allowances and OT
• Guaranteed AWS
• Performance bonus
• Increment after probation (subject to performance)
• Completion bonus (1 year)
• Location: Kranji
• Work week: 4/3/4/3 (12 hours shift)

Key Responsibilities:

• Perform robot PM: parts cleaning & greasing, replacement of sensors, motors, motor drivers etc
• Installation of vacuum valves, fore line pipes, heater jackets
• Support tool owner engineer to do technical activities in fab: trouble shoot, modification, installation, de-installation
• Support 6S & logistic activities (parts cleaning, arrangement, label-ling, housekeeping
• Other related ad hoc duties

Key Requirements:

• Min Nitec in engineering
• No experience welcome to apply!

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Key Benefits:

• Competitive basic salary up to $2,700 plus $30 monthly allowance, OT pay, and variable bonus (gross salary up to $3,000).
• 5-day work week, including weekends and public holidays.
• Shift work allows flexibility with morning, afternoon, and evening shifts available.
• Hands-on experience with a variety of building, mechanical, and electrical systems.
• Located at River Valley Road, with opportunities for career development.

Job Description:

We are seeking a skilled and service-oriented Technician (Building Maintenance) to join our team. You will be responsible for maintaining and repairing mechanical and electrical (M&E) systems, performing routine inspections, and ensuring compliance with safety regulations. If you have a passion for hands-on work and take pride in keeping buildings running smoothly, this role offers excellent growth opportunities.

Roles & Responsibilities:

• Provide maintenance, repair, and servicing for building systems.
• Conduct preventive maintenance and troubleshooting for M&E systems.
• Perform routine inspections on M&E fixtures, cooling towers, and chillers.
• Supervise term contractors in repair and testing of M&E services.
• Attend to fault reports, breakdowns, and customer service requests.
• Accurately complete maintenance logs, schedules, and reports.
• Ensure compliance with building and fire safety rules.

Requirements:

• Minimum 2-3 years of relevant experience in building or facilities maintenance.
• NITEC in Building Services, Electrical, Mechanical, or Facility Technology.
• Good working knowledge of building, mechanical, and electrical systems.
• Basic proficiency in MS Word and Excel.
• Independent, self-motivated, and a team player with a service-oriented mindset.
• Willingness to work on rotating shifts, public holidays, and weekends.

Additional Information:

• Location: River Valley Road.
• 5-day work week, including weekends and public holidays.
• Shift timings: 6:30am-3:30pm, 8am-5pm, 1:30pm-10:30pm (rotating roster).

Responsibilities

• Responds readily to any train-borne equipment failure in depot and mainline, and to effect restoration of a failed system or equipment to a normal and safe operating state in shortest possible time.
• Maintains, repairs, trouble-shoots, inspects, diagnoses all rolling stock equipment, and to provide first line corrective actions to train-borne fault.
• Performs pre-service checks on trains prior to revenue service and rectify any abnormality encountered during inspections.
• Shunts and drives Electric Trains when the need arises.
• Undertakes modification works and fleet-wide checks.
• Drive Electric Train in the Depot as and when require.
• Assists Senior / Technical Officer in planning and organizing maintenance activities.
• Ensures strict compliance and adherence to the safety rules and regulations, reports any hazard to the management.
• Maintains maintenance records and documentation in accordance with ISO quality standards and procedures.
• Acts as member of a re-railment team as required.

Requirements

• ITC / NTC / Higher NITEC / NITEC in Engineering (Electrical / Electronic Engineering) from ITE, preferably with minimum 2 years working experience in maintenance / repair / installation of electrical or mechanical equipment
• Entry level candidates are welcome to apply
• Pleasant personality
• Positive, optimistic, mature, self-motivated and energetic team player
• Able to work independently
• Ability to perform shift
• Able to identify colours

By submitting your application for this position, you consent to:

a. the collection, use and disclosure of your personal data by SBS Transit Limited and its subsidiaries (“the Company”) for the purposes of your application and potential employment with the Company, including disclosing such personal data to any of SBS Transit Limited’s subsidiaries, affiliates or related corporations (if necessary for processing of job application); and

b. SBS Transit Limited and its subsidiaries' retention of your personal data for 1 year for consideration of future job opportunities (where applicable) from the date of submission of application.

We regret to inform that only shortlisted applicants will be notified.

Jason Marine Group Limited is a Maritime-centric Equipment and Service Provider based in Singapore, providing marine electronics and communications equipment/services and integration services for the commercial marine and offshore industries in Singapore, Asia and Europe regions.

We are seeking a Commissioning Technician to support the implementation of the design and installation of the marine electronics and communications equipment/services onboard shipping vessels, not limited to locally, offshore and overseas. He/ She will report directly to Commissioning Manager and the Energy Team in carrying out the following work and responsibilities:

• Support with implementation/ assembly/ design/ testing with system or/ and project Engineers.
• Carry out installation, termination, testing, troubleshooting, but not limited to Navigation, IT, Scada, Communication system and equipment in workshop assembly and onsite.
• Assist and/ or carry out Factory Acceptance Test & Site Acceptance Test with client.
• Contribute necessary improvements and offer advice about operational procedures.
• Work with the team to investigate problems and diagnose and repair faults, if any, in order for the equipment to work to its specifications
• Help out in the timely and accurate reports, documentation, timesheets, service reports as per company/ client format for submission and reporting.
• Work with the Service Department to resolve enquiries, if required.
• Any other associated tasks and responsibilities assigned from time to time.

Other Requirements

• Able to work under tight schedule and minimum supervision.
• Able to travel in short notice.
• Physically capable and available to work overtime including weekends and public holidays.
• Good verbal communication skill.
• Ensure a safe working environment.
• Experience in Telecommunication system in marine, shipyard, offshore is preferred. Job Title and Grade will commensurate with experience.
• Fresh candidates are also welcome as there will be onboard mentorship and On-Job-Trainings (OJT).
• Desirable overtime allowance after probation period.

Integrated DNA Technologies (IDT) is the leading manufacturer of custom oligonucleotides and proprietary technologies for genomics applications. Our work is complex and cutting-edge, and our team members are curious, creative thinkers who understand that good data drives smart decisions. At IDT, we realize that although science may be uniform, people are unique. We promote a culture where engaged people are motivated and have opportunities to achieve their full potential, as part of one global team.

IDT is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

This position is part of the Manufacturing & Operations located in Singapore and will be on-site (Mid Shift: 1pm - 10pm). At IDT, we are one global team. We celebrate our differences, engage in healthy debate, and are inclusive. Together, we accomplish great things

In this role, you will have the opportunity to:

• Accurately uses aids and work instructions to make decisions about the proper production flow based on product type or services.
• Prepares materials according to documented procedures using standard lab equipment and maintains accurate and detailed product, process, instrument, and training records.
• Performs lab cleaning and decontamination protocols in accordance to work instructions and maintenance connection software, as well as maintains electronic records of tasks to ensure that work is performed in an accurate, efficient, and appropriate manner.

The essential requirements of the job include:

• Minimum N/O level, Nitec in a Science related field or equivalent by relevant experience.
• Proficient computer skills which include knowledge of the internet, Microsoft Excel and Microsoft Word.

It would be a plus if you also possess previous experience in:

• Previous laboratory and chemical handling experience. (Preferred)
• Basic knowledge in manufacturing practices.

Will be part of Operation & Support Team to support Project implementation and Maintenance.

The key responsibilities are as below:

Job Description:

Project:

• Support Project Team in Project implementation
• System setup, configuration and testing
• Perform any other duties as assigned.

Maintenance:

• Perform CUAS Preventive and Corrective maintenance works at restricted Areas.
• Provide support services in operation exercise.
• Perform functional check and/or repair on testers and unit under Test.
• Perform any other duties as assigned.

Requirements:

• NITEC / Higher NITEC / Diploma in Mechanical, Electronics or Computer Engineering
• Fresh graduate are welcome to apply
• Experience in Electronics, PCB-related, electrical & networking would be advantageous
• Able to work over the weekend and standby for fault call if required
• Able to interpret schematics, technical manual and drawings for maintenance works.
• Ability to use analytical skills and a "hands-on" person.
• Good interpersonal skills, proactive and work well with others.
• Possess class 3 driving license will be advantageous.

Interested candidates can click on 'Apply' or send updated resume to [email protected]

We are regret that only shortlisted candidates will be notify

Jason Marine Group Limited is a Maritime-centric Equipment and Service Provider based in Singapore, providing marine electronics and communications equipment/services and integration services for the commercial marine and offshore industries in Singapore, Asia and Europe regions.

We are seeking a Commissioning Technician to manage the design and installation of the marine electronics and communications equipment/services onboard shipping vessels, not limited to locally, offshore and overseas. He/ She will report directly to Commissioning Manager and the Energy Team in carrying out the following work and responsibilities:

• Support with implementation/ assembly/ design/ testing with system or/ and project Engineers.

• Carry out installation, termination, testing, troubleshooting, but not limited to Navigation, IT, Scada, Communication system and equipment in workshop assembly and onsite.

• Assist and/ or carry out Factory Acceptance Test & Site Acceptance Test with client.

• Contribute necessary improvements and offer advice about operational procedures.

• Work with the team to investigate problems and diagnose and repair faults, if any, in order for the equipment to work to its specifications

• Help out in the timely and accurate reports, documentation, timesheets, service reports as per company/ client format for submission and reporting.

• Work with the Service Department to resolve enquiries, if required.

• Any other associated tasks and responsibilities assigned from time to time.

Other Requirements

• Able to work under tight schedule and minimum supervision.

• Able to travel in short notice.

• Good verbal communication skill.

• Physically capable and available to work overtime including weekends and public holidays.

• Ensure a safe working environment.

• Experience in Telecommunication system in marine, shipyard, offshore is preferred. Job Title and Grade will commensurate with experience.

• Fresh candidates are also welcome as there will be onboard mentorship and On-Job-Trainings (OJT).

• Desirable overtime allowance after probation period.

Interested applicants can also send your resume/ cv to ‘[email protected]’.

We are a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing if navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

Jason Marine Group Limited is a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Technician/ Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing of navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

1. MUST HOLD ANY DIPLOMA OR DEGREE IN ANY MANNER IN A RECOGNISED UNIVERSITY/BOARD

2. MUST HAVE A MINIMUM OF 5 YEARS OF EXPERIENCE IN THE CONSTRUCTION SECTOR

3. MUST BE FLUENT IN ENGLISH.

4. SHOULD COOPERATE FOR OVERTIME WORKING IF NECESSARY

5. SHOULD FOLLOW SUPERIOR'S INSTRUCTION TIME TO TIME

6. SHOULD BE FAMILIAR WITH SINGAPORE ROAD ROOTS

7. SHOULD HAVE CLASS 3/3C DRIVING LICENCE

8. SHOULD OBEY THE COMPANY RULES AND REGULATIONS

9. SHOULD BE READY FOR LOADING AND UNLOADING

10 SHOULD BE ABLE TO HANDLE THE SITE INDEPENDENTLY

Join Our Growing Team!

The SKYLINK Group is a premier all-in-one mobility solution provider for retail sales of passenger cars and commercial vehicles, all vehicle leasing, Motor insurance, credit Hire Purchase financing, Motor workshop with full capacity of MRO (Maintenance, Repair and Overhaul) services, and vehicle body engineering works for all commercial and passenger vehicles.

Since 2017, SKYLINK Group has been rapidly expanding its offerings and fleet. We have served over 5,000 corporate customers including major industry leaders in logistics, distribution, F&B, marine, construction, sanitation, and government services.

With a commitment to fleet modernization, we have expanded our offerings to EV and Hybrid vehicles, and continuously aspire to provide greater value to our customers.

Be a part of the SKYLINK family and kick-start your career growth and progression in the mobility space today.

The Job

• Carry out diagnostic for van and lorry
• Carry out mechanical repair for van and lorry
• Carry out electronic repair for van and lorry
• Able to repair air condition
• Carry out engine overhaul and chassis repair
• Conduct preventive maintenance for vehicle
• Ensure that all work order is carried out accordance to the schedule
• In Charge of Vehicle movement and parking

Requirements

• Minimum 5-year relevant workshop experience dealing with commercial vehicle
• Familiar with light to medium size van & lorry and the servicing of major brand such as Toyota, Nissan, Mitsubishi, Isuzu and Hino
• Familiar with both Petrol and Diesel engine
• Possess positive learning attitude & a good team player
• Good interpersonal and communication skillBilingual English & Mandarin to speak to customer on commissioning the repair when needed
• 6-days work / week

工作内容

• 能对货车和卡车进行维修的诊断
• 能对货车和卡车进行机械的维修
• 能对货车和卡车进行电子的维修
• 对货车和卡车进行空调的维修
• 对货车和卡车发动机大修
• 对货车和卡车进行保养
• 协助团队已确保所有工作订单按计划进行
• 负责车辆移动和对相应的停车位置进行安排

工作要求

• 至少5年或以上的商用和乘用车辆相关维修经验
• 熟悉各种尺寸的货车和卡车，并能够服务主要品牌如丰田、日产、三菱、五十铃和日野
• 熟悉汽油和柴油车的发动机
• 具有积极的学习态度，并且是一个良好的团队合作者
• 良好的人际关系和沟通技巧
• 双语能力（英语和普通话），能够在需要时与客户沟通维修事宜
• 6天工作制

Integrated DNA Technologies (IDT) is the leading manufacturer of custom oligonucleotides and proprietary technologies for genomics applications. Our work is complex and cutting-edge, and our team members are curious, creative thinkers who understand that good data drives smart decisions. At IDT, we realize that although science may be uniform, people are unique. We promote a culture where engaged people are motivated and have opportunities to achieve their full potential, as part of one global team.

IDT is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

This position is part of the Manufacturing & Operations located in Singapore and will be on-site (Mid Shift: 1pm - 10pm). At IDT, we are one global team. We celebrate our differences, engage in healthy debate, and are inclusive. Together, we accomplish great things

In this role, you will have the opportunity to:

• Accurately uses aids and work instructions to make decisions about the proper production flow based on product type or services.
• Prepares materials according to documented procedures using standard lab equipment and maintains accurate and detailed product, process, instrument, and training records.
• Performs lab cleaning and decontamination protocols in accordance to work instructions and maintenance connection software, as well as maintains electronic records of tasks to ensure that work is performed in an accurate, efficient, and appropriate manner.

The essential requirements of the job include:

• Minimum N/O level, Nitec in a Science related field or equivalent by relevant experience.
• Proficient computer skills which include knowledge of the internet, Microsoft Excel and Microsoft Word.

It would be a plus if you also possess previous experience in:

• Previous laboratory and chemical handling experience. (Preferred)
• Basic knowledge in manufacturing practices.

Key Benefits:

• Competitive basic salary up to $2,700 plus $30 monthly allowance, OT pay, and variable bonus (gross salary up to $3,000).
• 5-day work week, including weekends and public holidays.
• Shift work allows flexibility with morning, afternoon, and evening shifts available.
• Hands-on experience with a variety of building, mechanical, and electrical systems.
• Located at River Valley Road, with opportunities for career development.

Job Description:

We are seeking a skilled and service-oriented Technician (Building Maintenance) to join our team. You will be responsible for maintaining and repairing mechanical and electrical (M&E) systems, performing routine inspections, and ensuring compliance with safety regulations. If you have a passion for hands-on work and take pride in keeping buildings running smoothly, this role offers excellent growth opportunities.

Roles & Responsibilities:

• Provide maintenance, repair, and servicing for building systems.
• Conduct preventive maintenance and troubleshooting for M&E systems.
• Perform routine inspections on M&E fixtures, cooling towers, and chillers.
• Supervise term contractors in repair and testing of M&E services.
• Attend to fault reports, breakdowns, and customer service requests.
• Accurately complete maintenance logs, schedules, and reports.
• Ensure compliance with building and fire safety rules.

Requirements:

• Minimum 2-3 years of relevant experience in building or facilities maintenance.
• NITEC in Building Services, Electrical, Mechanical, or Facility Technology.
• Good working knowledge of building, mechanical, and electrical systems.
• Basic proficiency in MS Word and Excel.
• Independent, self-motivated, and a team player with a service-oriented mindset.
• Willingness to work on rotating shifts, public holidays, and weekends.

Additional Information:

• Location: River Valley Road.
• 5-day work week, including weekends and public holidays.
• Shift timings: 6:30am-3:30pm, 8am-5pm, 1:30pm-10:30pm (rotating roster).

Preventive Maintenance Technician- Troubleshoot, repair and maintain food production equipment

- Execute emergency breakdown protocols

- Assist in resolving downtime issues

- Clean equipment and maintain equipment hygiene requirements for production use, after installation and/or repairs

- Collate and coordinate maintenance work, at times need to work with contractor

- Comply with cleanliness and safety regulations while setting up and maintaining food manufacturing equipment

- Able to perform ad-hoc duty when require

- Basic electrical and refrigerator knowledge

- Prepare maintenance reports/records in relation to the work assignedRequirements

- Minimum 1 Year of experience in maintenance work and engineering field, preferable in food manufacturing

- “O” leave / NTC3 or NITEC in Mechanical Enginnering

- Able to performance Shift- Willing to learn new skills

- Positive work attitude

Benefits:

• Competitive salary of up to $4,800 + variable bonus
• Opportunities for professional growth with a well-established construction company
• Comprehensive site experience coordinating with multiple trades and disciplines
• Hands-on leadership role in M&E work planning, QC implementation, and inspection
• Convenient location Defu Ln 1

Job Description:

As an M&E Coordinator, you will manage site coordination across various trades to ensure high standards and compliance with contract specifications. This role requires you to lead in M&E scheduling, inspection, and quality control, coordinating with sub-contractors and suppliers to support project progress and meet quality standards.

Roles & Responsibilities:

• Lead site coordination with all trades involved in the project
• Prepare and submit shop drawings, materials, and method statements (MOS)
• Ensure work aligns with contract requirements and technical drawings
• Plan and micro-schedule M&E work alongside other disciplines
• Liaise with sub-contractors, suppliers, and other stakeholders
• Implement quality control plans and monitor architectural materials
• Conduct inspections, trade demos, material testing, and mock-ups
• Verify Variation Orders (VO) and prepare back charges
• Attend sub-con meetings and update M&E project progress using scheduling tools
• Oversee compliance with Temporary Occupation Permit (TOP) checklist
• Ensure all work is performed in a safe working environment
• Perform other ad-hoc duties as directed by the Supervisor or Management

Requirements:

• Diploma/Degree in Mechanical, Electrical, or a related discipline
• Relevant certification in Mechanical & Electrical field
• Minimum 3 years of relevant local experience
• Ability to lead sub-contractors and ensure high-quality work with minimal defects
• Preferred experience in Quality Mark (QM) projects
• Knowledgeable in M&E specifications and BCA quality standards
• Proficient in Microsoft Office and knowledgeable in BIM

Additional Information:

• Salary: Up to $4,800 basic + variable bonus
• Working Location: Defu Ln
• Working Days: 6-day work week (Monday to Saturday, with one Saturday off per month)

Key Benefits:

• Competitive basic salary up to $2,700 plus $30 monthly allowance, OT pay, and variable bonus (gross salary up to $3,000).
• 5-day work week, including weekends and public holidays.
• Shift work allows flexibility with morning, afternoon, and evening shifts available.
• Hands-on experience with a variety of building, mechanical, and electrical systems.
• Located at River Valley Road, with opportunities for career development.

Job Description:

We are seeking a skilled and service-oriented Technician (Building Maintenance) to join our team. You will be responsible for maintaining and repairing mechanical and electrical (M&E) systems, performing routine inspections, and ensuring compliance with safety regulations. If you have a passion for hands-on work and take pride in keeping buildings running smoothly, this role offers excellent growth opportunities.

Roles & Responsibilities:

• Provide maintenance, repair, and servicing for building systems.
• Conduct preventive maintenance and troubleshooting for M&E systems.
• Perform routine inspections on M&E fixtures, cooling towers, and chillers.
• Supervise term contractors in repair and testing of M&E services.
• Attend to fault reports, breakdowns, and customer service requests.
• Accurately complete maintenance logs, schedules, and reports.
• Ensure compliance with building and fire safety rules.

Requirements:

• Minimum 2-3 years of relevant experience in building or facilities maintenance.
• NITEC in Building Services, Electrical, Mechanical, or Facility Technology.
• Good working knowledge of building, mechanical, and electrical systems.
• Basic proficiency in MS Word and Excel.
• Independent, self-motivated, and a team player with a service-oriented mindset.
• Willingness to work on rotating shifts, public holidays, and weekends.

Additional Information:

• Location: River Valley Road.
• 5-day work week, including weekends and public holidays.
• Shift timings: 6:30am-3:30pm, 8am-5pm, 1:30pm-10:30pm (rotating roster).

Responsibilities:

● Execute production/ maintenance work by following manufacturing process work instructions

● Prepare, install, program, or repair programmable components.

● Perform configurations, recordkeeping, and quality check efforts.

● Perform minor repairs and replacements for robots.

● Work closely with departments to ensure committed schedules are met.

● Liaise with the Supply Chain department in receiving items, requesting, and maintaining relevant inventory.

Requirements:

● Experience in electrical/ mechanical engineering is required

● Nitec, Diploma, or Degree in Electrical Engineering Technology or similar, some experience in a Production Line will be an advantage.

● Strong communication skills in English (Experience in technical writing will be an advantage) Google Suite, Microsoft Office. Knowledge of Linux/ Ubuntu is good to have.

● Basic Hand tools and troubleshooting skills.

Product area

The Data Center team designs and operates some of the most sophisticated electrical and HVAC systems in the world. We are a diverse, upbeat, creative, team-oriented group of engineers committed to building and operating powerful data centers.

Job description

Google isn't just a software company. The Hardware Operations team is responsible for monitoring the state-of-the-art physical infrastructure behind Google's powerful search technology. As an Operations Technician, you'll install, configure, test, troubleshoot and maintain hardware (like servers and its components) and server software (like Google's Linux cluster). You'll also take on the configuration of more complex components such as networks, routers, hubs, bridges, switches and networking protocols. You'll participate in or lead small project teams on larger installations and develop project contingency plans. A typical day involves manual movement and installation of racks, and while it can sometimes be physically demanding, you are excited to work with infrastructure that is at the cutting-edge of computer technology.

Qualifications

Job responsibilities

• Contribute to efforts/projects in the deployment, maintenance, and support of current and new data center infrastructure.
• Learn and apply skills in repairing and troubleshooting different machine platforms.
• Participate in complex troubleshooting and resolve critical technical issues.
• Test and troubleshoot new server and network hardware components and designs.
• Install and maintain switches, routers, and other networking gear. Configure and troubleshoot Linux OS-related issues.

Minimum qualifications

• Bachelor's degree or equivalent practical experience.
• Experience diagnosing and troubleshooting one of the following: operating systems and computer/server hardware or networking protocols.
• Experience Data Centers, Linux, Hardware, Networking, OSI Model, Written Communication, Teamwork, Communication.

Preferred qualifications

• Experience in maintenance of server systems.
• Experience working within a data center or network operation center environment.
• Experience with troubleshooting hardware and network issues using Linux tools.
• Knowledge in Networking, including topology and protocol understanding.