Job Scope:

· To assist Fumigator in carrying out fumigation & pest control services in accordance with regulatory requirements

· Notify Supervisor immediately of all incidents which are of material importance to the company such as accidents/near-misses/safety breaches/customer complaints followed by written report

· Check and ensure that all material/equipment/resources required for the day's work is available in the vehicle and in good working condition

· Always maintain sufficient stock of supplies and to submit requisition for replenishment if stock runs low.

· Maintain all equipment on board the vehicle in good working condition and to report damages/uncalibrated items immediately

· To ensure accurate reporting of fumigant stock in the vehicle at the end of each working day

· To be able to manage client's expectations and requests at work site and perform decision making if the team is able to accede to the demands within their limits, else TL will need to escalate to the Supervisor

Requirement:

1.) Driver’s License (Class 3) Required

2.) Vector Control Technician Licence

3.) Completed the following training

a.) Forklift Driver’s Licence

b.) Scissor lift Certificate

c.) Basic First Aid Course Certificate

d.) WAH Supervisor Certificate

4.) Fluency in spoken & written English

5.) Good planning and time management skills

6.) Physically Fit

7.) Ability to work in Teams, and supervise junior technicians and assistants

8.) Good interpersonal skills

9.) Good customer service skill

ALG is currently hiring Aircraft Junior Technicians to work for our Commercial Aviation client based in Changi, Singapore. This role will be on a minimum two-year contract with an extension or a permanent role likely should you excel.

Job Responsibilities:

• Troubleshoot, inspect and perform maintenance on customer aircraft including engine, avionics, and aircraft components.
• Be attentive, and ensure close coordination between other trades (B1, B2, Sheet Metal, Cabin) to ensure continuous smooth progress and completion of the projects.

Job Requirements:

• At least 1 years of relevant experience in aircraft maintenance
• Willing and able to perform rotating shifts, including night shift work (if required)
• Able to read mechanical engineering drawings with the direction of the supervisor

If you're interested in this role, please APPLY NOW! Do note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R2093526

Technicians (6 Months Contract)

Our client is a leading vending machine provider. They are currently seeking for Technicians.

The role of the Technicians includes:

• Perform set-up, programming and testing of vending machines for field deployment.
• Assist with shifting of vending machines.
• ⁠Ensure tools issued and equipment are accountable, properly maintained and in good working condition.
• Follow safety rules/guidelines
• ⁠Assist with any ad-hoc duties assigned.

Job Requirement:

• Physically Fit
• Best to have experience in mechanical engineering or machine assembly

Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability.

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Win Hui
EA Personnel Reg No.: R23115634

Kindly send in your latest job resume without your NRIC numbers and other ID numbers.

For job resume(s) that contain NRIC numbers and/ or ID details, it may not be processed and your job application may be rejected due to unacceptable submission of job application details. Please refer to the advisory guidelines on the PDPA for NRIC numbers and other ID numbers.

By sending your job resume to us, it shall be deemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

ALG is currently hiring Aircraft Technicians to work for our aviation client based in Singapore. This role will be on a minimum one-year contract with an extension or a permanent role likely should you excel.

Job Responsibilities:

• Responsible for the broad range of maintenance tasks for several commercial aircraft models.
• Troubleshoot problems, make repairs, and complete inspections.
• Ensure smooth maintenance processes with strict adherence to schedules & targets
• Verify the aircraft conformity and the state of its engine or cockpit pieces
• Maintain the aircraft, repair the reported defects and ensure the plane service so it can leave in confidence.
• Supervise other technicians and assist with training.

Job Requirements:

• Diploma/NTIC in aeronautical engineering, aerospace, or any equivalent
• 3-4 years' of relevant experience in line/base maintenance for commercial aircraft is required
• Willing and able to perform rotating shift, including night shift work
• Be available to start immediately

If you're interested in this role, please APPLY NOW! Do note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R22105273

Service Technician(Kitchen Equipment)

Working days: 5.5days

Working Hours: Mon-Fri 8am - 5pm, Sat 8am -12pm

Working Location: Defu Lane 10 (Hougang)

Salary: Basic $2300 - $3000 + OT (When require)

Job Description:

• Install, service, and repair commercial kitchen equipment.
• Perform routine maintenance and inspections to ensure equipment operates efficiently and safely.
• Diagnose mechanical and electrical issues and implement effective solutions.
• Perform testing and inspection on finished goods for quality issues and perform corrective actions.
• Provide assistance and technical service requests to and by project clients.
• Other duties as assigned by management.

Tee Xin Li Reg No: R24121619

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

The jobscopes include:

1) Service of Airconditioner

2) Repair of Airconditioner

3) Good checking, trouble shootings skill in splits, and multisplit type aircon

4) Possess Class 3 License will be an added advanage

5) Have working experience in Agent (Manufacturer) will be added advantage

6) Good Team Player

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Laboratory Technician to be part of their Labortory Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Laboratory Technician:

• Assist in routine lab tasks such as paint preparation, panel setup, and airless spray applications.
• Conduct sampling, testing, and analysis for paint products.
• Support chemists in development projects, including managing stock levels for panels, raw materials, and lab supplies.
• Participate in trial applications and inspections outside the lab under supervision.
• Handle non-chemical waste disposal and maintain a safe work environment by following ISO, safety, and environmental standards.
• Communicate progress or delays effectively with the line manager.
• Ensure workplace safety, especially in handling chemicals, and follow preventive measures to reduce risks.

Requirements:

• Diploma in related field
• Entry level are welcome to apply. Training provided.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Cabling Technician x2

Salary range: $2500 - $3500

Working days: Monday to Friday

Working hours: 8am-5pm / 8.30am - 5.30pm

Working Location: Mandai Estate - Kranji / Yew Tee

Job Description

• Install, repair, test & commission cable systems (voice/data/fibre optics)
• Performs termination and testing of new cabling
• Prepare / Install cable pathways & supports
• Assist in the preparation of tools & materials used for daily work assignments
• Troubleshoot cabling system issues & perform repairs & maintenance
• Assist co-workers with installation & routine maintenance of structured cabling systems
• Work closely with client to manage schedule operations of assigned duties.

Requirements

• NITEC (Electrical Engineering / Electrical Technology/ Electronic / IT ) or work- related experience
• Class 3 driving license would be advantageous

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

The Data Center Infrastructure Operations Team forms the backbone of AWS, supporting the rapidly growing business and its customers 24/7. We are dedicated to maintaining AWS’s physical infrastructure while upholding the highest operational standards in safety, security, availability, productivity, capacity, efficiency, and cost-effectiveness.

As a team member, you’ll collaborate with a diverse group of professionals, including software, hardware, and network engineers; supply chain specialists; security experts; operations managers; and other critical roles. Together, you’ll work across AWS to deliver the highest standards of safety and security while ensuring seemingly infinite capacity at the lowest possible cost for our customers.

In this role, you will be part of a team responsible for the operation and maintenance of state-of-the-art critical infrastructure facilities based in Singapore. You will collaborate with a world-class technical team, working alongside some of the brightest and most talented engineers in the data center industry. This position offers the opportunity to work with highly experienced professionals while developing your skills and advancing your career within one of the most innovative and progressive technology companies in the world.

Your responsibilities will include performing preventive maintenance on various facility equipment (such as electrical and mechanical, control, and fire-fighting systems), managing change processes, creating procedures, and overseeing vendor operations.

Key job responsibilities
• You will plan and perform preventive and corrective maintenance of mechanical and electrical equipment’s, including but not limited to, chiller, air handling unit (AHU/CRAHU),fan coil unit (FCU), ventilation fan, split air conditioner (AC), pumps, leak detection systems, roller shutters, power distribution boards, UPS (Uninterruptible Power Supply)batteries, and generators.
• Develop site specific documents including Maintenance checklist, EOP, SOP and RA.
• Service report preparation and submission for preventive and breakdown maintenance works.
• Ensure safe keeping of hand tools and maintain good housekeeping.
• Ensure all works are carried out safely and/or in accordance with established standards, procedures & local legislation.
• Any other tasks, when required by the immediate manager.

Basic Requirement

• Technical College Degree, Qualified Technical Diploma, or NITEC Certification.

• Proficient in both verbal and written technical communication and enthusiastic about the maintenance of data centers or critical facility environments.

• Strong communication and organizational skills and capable of managing priorities effectively in a complex and fast-paced environment.

Summary Benefit:

• Salary range: $2000-$2800
• Location: Tai Seng (Semicon - Cable, Harness)
• Mon to Fri, Office hours
• MNC with great career progression

Responsibilities :

• Conduct incoming inspections and first article checks on raw materials and components based on written procedures and specifications.
• Oversee the calibration system for instruments, including documentation and procedures.
• Use advanced methods like Six Sigma and SPC to develop effective, maintainable quality systems.
• Operate various hand tools and machines such as screwdrivers, soldering irons, and crimpers.
• Oversee and maintain the quality assurance laboratory and support internal and supplier audits.
• Ensure timely completion of inspection requirements, create necessary certifications, and meet daily quality targets.

Requirements :

• Able to read CAD drawings

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Khor Wan Ying (R22109948)

• Engage in hands-on activities to conduct regular inspections and monitoring of various building services and facilities.
• Address breakdowns, respond to complaints/feedback, and attend to tenant service calls regarding building services and facilities.

Requirements:

• Nitec and above.
• At least 3 years of relevant experience.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

About the Company
A global leader in healthcare, specializing in endoscopy systems and medical devices. The company is committed to advancing medical technology, providing solutions that improve patient care and clinical outcomes.

About the Team | Manager
You will be part of the Regional Endoscopy Division, working closely with the Regional Technical Supervisor. This role requires collaboration with subsidiaries and distributors across the region to provide technical support and expertise, ensuring the smooth operation of the company’s products.

About the Job
In this role, you will handle both technical repairs and support for endoscopy systems. Your responsibilities include repairing endoscope products from customers, entering repair data, creating repair analysis reports, and coordinating technical support via email. You will also be tasked with ensuring that repairs meet quality specifications and assisting with the training of subsidiaries and distributors. Additionally, you will provide field service support to Field Service Engineers (FSE) and contribute to service improvements in collaboration with the Technical Supervisor.

Skills and Experience Required
Ideally, the right applicants will possess the following:

• Minimum of 3 years of work experience, preferably in the same or a similar industry.
• Strong team player with attention to detail and the ability to multitask.
• Proficient in Microsoft Word, Excel, PowerPoint; knowledge of IT (hardware/software) is a plus.
• Basic equipment repair skills, including disassembly and soldering.
• Willingness to take on new challenges and meet repair targets.
• Customer-service oriented with the ability to present in classroom settings.

If you are a strategic and driven professional with expertise in technical support and endoscopy systems, this role offers an exciting opportunity to shape the future of healthcare across the region.

To apply online, please use the 'apply' function. You may contact Putra Nur Afiq (EA: 94C3609/R22105891) directly via email or LinkedIn for learn more. We regret to inform you that only shortlisted candidates will be notified.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Working Hours: 7am-7pm; 7pm-7am

Roles & Responsibilities

Assist in the installation, operation, trouble-shooting, maintenance and repair activities of factory and office machineries and equipment, with an emphasis on automation machineries and robotic systems.

Specific Duties & Responsibilities:

• Support Principal Automation Engineer/Automation Engineer in providing technical support in computerized automation/robotic systems.
• Perform machineries and equipment installation, set-up, servicing, maintenance and repair job (both corrective and preventive), and ensure automation/robotic systems to remain in a validated and functional state at all times, including setting up or calibration check.
• Ensure that automation equipment are well maintained in good working condition to support production or engineering runs with minimum downtime.
• Ensure timely diagnosis, trouble-shooting and resolution of identified automation/robotic system issues (both hardware and software).
• Perform routine checks to monitor equipment operating parameters, prompt updating onto monitoring system to ensure operations are within control specifications, including setting up or calibration check.
• Prepare trouble report and be involved in work improvement projects.
• Perform any other duties as assigned by superior and/or management.

Job Specification:

• NTC 3/Diploma in Mechanical/Electrical/Mechatronics or equivalent.
• Understanding of electrical/mechanical/pneumatic schematics • Fundamentals in robot teaching
• Basic knowledge in PLC, HMI, and control system.
• Sensors selection and maintenance
• Minimum 3 years’ experience in process control/automation/robotic system solution in a manufacturing or related field.
• Knowledge Required: • Working knowledge in metal stamping industry is preferred. • Possess safety awareness in handling machine as well as basic safety knowledge in factory.
• Skills Required: Good trouble shooting skills • Hands on skills in mechanical, electrical & pneumatic matters • Good planning, supervisory, interpersonal and analytical skills • Ability to communicate technical/ complex information both verbally and in writing. • Perform multiple tasks concurrently and respond to emergency situations effectively
• Attributes Required : Able to handle physical work, reliable, honest, initiative, independent and good team player

Compensation & Benefits

• Annual Increment
• Performance Incentive Bonus
• Career Progression

For quick reply, please contact me at +65 85878287

Registration Number: R21100938 (Tan Jie Bei)

EA Licence No: 22C1301 (Unisearch Services Pte Ltd)

Working hours: 7am-7pm/7pm-7am

Job Description:

Attend to all the maintenance & repair job required and ensure successful completion.

Perform preventive maintenance in all production machines.

Report and identify any defect or faults found during preventive maintenance.

Perform routine maintenance, troubleshooting, and repairs on stamping presses, feeders, conveyors, and other related equipment.

Inspect mechanical, hydraulic, pneumatic, and electrical systems to identify wear, damage, or potential failures.

Develop and adhere to preventive maintenance schedules to minimize downtime and maintain equipment reliability.

Conduct periodic inspections and adjustments to ensure machinery operates at peak performance.

Use diagnostic tools, schematics, and blueprints to identify and resolve equipment malfunctions.

Collaborate with engineering teams to implement effective solutions for recurring issues.

Ensure proper operation of safety devices, sensors, and automation systems.

Maintain detailed maintenance logs, repair records, and inventory of spare parts.

Report significant issues, root cause analyses, and resolutions to supervisors or engineering teams.

Ensure compliance with workplace safety regulations and company policies.

Conduct regular inspections to verify equipment meets safety and quality standards.

Suggest and implement process improvements to enhance equipment efficiency and reduce downtime.

Participate in training programs to stay updated on new technologies and techniques in the industry.

Any other duties as assigned by superior and/or management.

Requirements:

Minimum NTC 3 in Mechanical/Electrical Fitting.

Certification in maintenance and reliability (e.g., CMRP) is advantageous.

2–5 years of experience in maintenance within a stamping or manufacturing environment is highly desirable.

Compensation & Benefits

• Annual Increment
• Performance Incentive Bonus
• Career Progression

For quick reply, please contact me at +65 85878287

Registration Number: R21100938 (Tan Jie Bei)

EA Licence No: 22C1301 (Unisearch Services Pte Ltd)

Our client is specialized in the production and distribution of disposable medical devices.

• Perform technical support for daily manufacturing operation.
• Ensure all equipment are well maintained.
• Assists in machine and equipment improvement and upgrade.

Requirements:

• Nitec in Engineering or equivalent
• At least 3 years of troubleshooting equipment failure and handling technical issues experience in cGMP manufacturing environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Fix equipment and carry out maintenance works at customers' premises
• Liaise with the customers and sub-contractors to facilitate the maintenance

Requirements:

• Nitec in Electronic or Electrical Engineering
• 2 years of hands-on experience in carrying out off-site trouble shooting of any electrical and electronics system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Laboratory Technician to be part of their Labortory Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Laboratory Technician:

• Assist in routine lab tasks such as paint preparation, panel setup, and airless spray applications.
• Conduct sampling, testing, and analysis for paint products.
• Support chemists in development projects, including managing stock levels for panels, raw materials, and lab supplies.
• Participate in trial applications and inspections outside the lab under supervision.
• Handle non-chemical waste disposal and maintain a safe work environment by following ISO, safety, and environmental standards.
• Communicate progress or delays effectively with the line manager.
• Ensure workplace safety, especially in handling chemicals, and follow preventive measures to reduce risks.

Requirements:

• Diploma in related field
• Entry level are welcome to apply. Training provided.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

• To ensure equipment and machines operate in good condition by performing maintenance and troubleshooting of machines.
• Perform maintenance activities on machines in accordance with the established schedule.
• Perform daily inspections of machines and carry out repair work on machines and equipment.
• Update the replacement record of machine parts.
• Provide daily activity reports.
• Perform other duties (ad-hoc) task whenever required.

Primary Purpose

-Looking for New/experienced Automotive Technicians (Ex Army Technicians are ideal)

-To conduct automotive maintenance and repair, inclusive of preventative maintenance servicing to vehicles.

-To test and ensure vehicles are properly maintained/repaired to satisfaction.

Qualifications/Education/Certification/Licensure

- No certification required, however AUTOMOTIVE NITEC or diploma holders preferred

- Valid Driver's license (Class 3) or ability to obtain within six months of hire is advantageous

Special Knowledge/Skills Effective communication and interpersonal skills.

-Understand and execute verbal and written instructions.

-Cooperative and show initiative towards improving skills.

-Ability to work productively with minimal supervision.

Experience

No experience required. 3-5 years in the automotive industry preferred.

Major Responsibilities and Duties

1) Perform basic care and maintenance, including changing of oil, replacing of filters and checking oil/fluid levels.

2) Repair/Replace worn or defective parts such as brake pads, sensors and other vehicle parts as required.

3) Troubleshoot and rectify any vehicular faults.

*Please note that new hires may require a Lead time of 2 months before commencement of work*

Please contact +65 80797407 for any enquiries.

Job Title: Laser Technician

Company: Shinagawa Eye Centre

Job Description:

1. Operate Equipment: Perform LASIK-related tests using machines like Femtosecond, Excimer lasers, and topography.
2. Maintain Operating Theatre: Ensure the theatre is ready for surgeries and all equipment is functioning properly.
3. Prepare Case Notes: Prepare LASIK case notes at least one day before surgery.
4. Schedule Equipment Maintenance: Arrange routine maintenance for equipment and fixtures (e.g., dehumidifiers, lasers).
5. Front Counter Duties: Handle patient registration, payment collection, and appointment bookings.
6. Customer Service: Provide financial counselling and respond to inquiries via phone and email.
7. Support Surgery Schedule: Manage booking of operating theatres for LASIK surgeries.
8. Assist Clinic Manager: Perform ad-hoc tasks assigned by the Clinic Manager or Doctor.
9. Teamwork: Collaborate well with others, demonstrating excellent communication and interpersonal skills.
10. Positive Attitude: Display a proactive and positive working attitude.

Working Details:

• Hours: 5.5 days (Mon-Fri: 8:30am-5:30pm, Sat: 8:30am-1:00pm)
• Location: Orchard road

Interested candidates please whatsapp 6416 0542 or Telegram @TammyYap with the following details:

Name:
Residential Area:
Availability:

EA Personnel Name: TAMMY YAP YONG QI
EA Personnel No: R24121217
EA License No: 04C3537

• Operate machines and perform LASIK related tests on ophthalmic equipment (e.g. Intralase, Excimer) in the operating theatre and the diagnostic room

• Ensure the operating theatre is in optimal condition for surgeries and that machines/equipment are functioning smoothly

• Prepare LASIK case notes at least a day before the surgery

• Arrange routine maintenance of equipment/fixtures (e.g. Intralase, Excimer, Dehumidifier, and OT doors)

• Perform front counter duties including patient registration, dispensing, booking of operating theatres, collection of payment, providing financial counselling, handling of enquiries through phone calls or email, and appointment fixing

• Ad-hoc duties as and when assigned by the Clinic Manager or Doctor.

For interested candidates, please send your updated resume:

Email: [email protected]

Whatsapp: 96503173

Telegram: @jesswongie

Jessie Wong Yuan Si

R2197171

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

Job Description

• Industry/ Organization Type: Waste Management Company
• Position Title: Plant Operation Technician, Team Leader (Maintenance)
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm/Shift Work: Day – 8 am – 8 pm, Night – 8 pm – 8 am
• Salary Package: Gross up to $4,500 (Basic + OT/Shift Allowance) + Company Transport/Transport Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Oversee the daily operation and process control of the incinerator and boiler turbine plants.
• Develop strategies and implement plans to enhance operational efficiencies and reduce costs.
• Manage the daily requirements of consumables, tools, and equipment for the plant.
• Oversee budget planning and cost management for maintenance operations.
• Establish and enforce operational procedures according to ISO & OHSAS standards, including training and communication to staff.
• Conduct regular inspections and prepare plant equipment for audits and inspections to meet all regulatory and safety standards.
• Ensure adherence to environmental regulations concerning air pollutants.
• Develop and maintain detailed maintenance schedules, managing manpower for both routine and shutdown maintenance effectively.
• Coordinate with other departments to manage power distribution and communicate any potential interruptions.
• Supervise, motivate, and lead a team of technicians and operators, ensuring high performance and compliance with safety standards.
• Develop and conduct in-house training for staff on operations, maintenance, emergency responses, and safety procedures.
• Manage documentation, records, and operational data analysis and reporting.
• Monitor and ensure contractor compliance with safety standards during maintenance works.
• Regularly review and assess contractor performance.
• Support the engineering department in maintaining and upgrading plant facilities, including developing preventive maintenance plans.

APPLY NOW!!!

• Diploma in Mechanical Engineering, Chemistry, or relevant field.
• Minimum of 3 years of supervisory experience in maintenance operations, preferably in rotary kiln incinerator or boiler operations.
• Ability to work in a 12-hour rotating shift pattern.
• In-depth knowledge of industry-specific safety and environmental regulations.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69800 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Tuas

Shift work

12 months contract

Job descriptions:

• Loads production equipment and conducts activities
• Documents all the activities executed or to be execute
• Reports any anomalies to instruments or equipment to maintain a high efficiency and safety level in accordance with the Good Manufacturing Practices
• Analyses with the Shift Manager / Production Support unexpected causes of negative trends
• Identifies inefficiencies and wastes paying attention to quality in the operative activities and processes/products
• Other ad hoc duties

Job Requirements:

• Min NITEC / Diploma / Degree in Chemistry / Biology or relavent disciplines
• No experience required as training will be provided
• Candidate with experience will be considered for senior roles

Interested candidates, do submit your reusme to: [email protected]

Telegram me at @jocelynchan

Jocelyn Chan| Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R1331820

Boiler Technician

for Operation of Industrial Power Plant

We are:

Engineering company specialized in Steam Boilers and Combustion Systems. We have engagement for Operation and Maintenance of Industrial Power Plant with Steam Generation.

Work Scope:

• Supervise operation of Gas Turbine for Power Generation and Waste Heat Steam Boiler.

• Join our team of Technicians for 24 hours operation of the power plant.

• Work will be in 12 hours shift from 8 to 8

• Operation of the plant as per Standard Operation Procedures.

• Perform inspections as per check list.

• Report of any abnormalities to the plant manager.

• Participate in preventive maintenance

• Recording of the plant performance parameters and daily activities.

Work Place:

• Within Tuas Medical Park

Requirements:

• Class 1 or 2 Boiler Attendant Certificate of Competency

• If experience in boiler operation and interested in obtaining Boiler Attendant Certificate.

• Technical competency

• Diploma in Mechanical / Electrical Engineering

• Experience of operation / maintenance of machinery and technical installations.

• Able to work independently

Employment Terms:

• Salary range SGD 4,000.- to 5,000.- based on experience / qualifications.

• Annual Performance Bonus

• Transport allowance

• Overtime allowance

• We will provide on-job training.