Primary Roles & Responsibilities

The patching cabling between network equipment and client’s network

The installation of power cables from equipment to power supply in rack/cabinet/closet

The installation, troubleshooting and de-installing IT equipment (Servers / Network /

Storage / etc)

o Install/swap out devices (e.g., phone, computers, cables, boards, edge routers, switches and etc.)

Complete all hard and complex Move, Add Change (MAC) requests within the defined service levels

Act as interface between client’s associates and management

Provide hardware break-fix services for network infrastructure

Perform onsite call-through, data, voice, website and security testing

Perform back-up testing to ensure all systems are connected to the client’s network as directed

Support carrier testing of circuits

Assist with facilities efforts such as vendor coordination and vendor supervision

o Power and uninterruptable power supply (UPS) restoral

o Water problems,

o Emergency cooling restoration,

o Fire suppression exercises, restoration, and post fire events

Support inventory management activities

o Receiving inventory

o Tagging of assets

o Tracking spares (crash kits)

o Ordering inventory

o Updating inventory records

o Prepare and return damaged equipment

Act as an interface, as needed, between associates at the applicable location and centralized project / operations / MAC management

Requirements:

Must be proficient in utilizing technical tools such as BERT testers, cable testers, and fiber testers.

Requires experience in working in communications closets

o Must be able to perform rack and stack activities

Must be able to safely lift heavy objects

o Must understand cable patching processes and procedures in copper and fiber

o Experience in either or both CommScope and Corning structured cables (copper and fiber)

o Must have a basic knowledge of data communications networking.

Must be able to assist in troubleshooting issues

Must understand network terminology

Requires good interpersonal communications skills

o Must be able to explain technical issues in a way the client will understand an

issue

o Must be able to interpret a client’s issue in a way that will allow technician to facilitate a resolution

Education/Experience Requirements

• 5+ years of experience in Data Centre operations and environment
• Must have a basic knowledge of local and wide area networking.
• High school Diploma or equivalent required

EA License no: 96C4864

Reg No: R23115903

JOB DUTIES

• Work in a team on scheduled projects.
• Support local and overseas project/attachment.
• Overseas project attachment and support up to 12 months.
• Report to Team Leader/Supervisor
• Install, de-install, relocation and preventive maintenance of semiconductor equipment.
• Commissioning/decommissioning of semiconductor equipment.
• Weekly Service Report update
• Monthly Progress Report assessment

EDUCATIONAL QUALIFICATIONS

Possesses Diploma or above in Engineering or a related field

CRITICAL SKILLS/KNOWLEDGE

On-the-job training by OEM for the first two months

WORKING EXPERIENCE

At least 2 or more years experience working in semiconductor industry.

PERSONALITY TRAITS

• Team worker
• Industrious
• Proactive
• Positive mindset
• Disciplined
• Physically fit

OTHER ABILITIES/APTITUDES

• Ready-to-go for overseas job attachment/support up to 12 months.
• Work at different sites depending on the project.
• Monthly online team meeting on a Saturday morning

BENEFITS/INCENTIVES

• 5 days work week
• 14 days annual leave
• Additional 1 day annual leave every 2 years with the company, up to 20 days

Transport allowance upon probation completion

1. $600 for car owners
2. $300 for other modes of transport including public transport

• To work in accordance wtih company policies, production plan, product specifications and management guidance
• Operate and monitor machinery which distillate, filter, separate, heat or refine chemicals, to blend,mix, process a wide range of chemical products
• Handover and takeover of plant status, routine check on plant, ensure all bleeders and vents are close
• Console technician to handover and takeover of plant status face to face at control room, check on MOS, screen through all pages for abnormality and check status of fire panel
• Report any leaks, deviation, and abnormality and unsafe conditions in the plant to Team Leader
• Perform process start-up, normal operation and shut-down in accordance to work instructions, ensure no deviation on process and safety
• Monitor processes, taking samples and performing routine chemical and physical tests of products and recording production data. Ensure products are meeting product specifications
• Line up for tank transfer and monitor transfer of products in conformance with safety procedures
• Logistic operation (Loading/unloading ISO tankers, road trucks, drumming, etc)
• Troubleshooting of equipment malfunctions, carrying out routine operating verification tests, filter cleaning, minor piping/spool connection/disconnect and request for maintenance if needed
• Prepare equipment for maintenance, LOTO, check for leaks and gas test, De LOTO, AFTT, test run and put equipment back in service
• Assess the area or equipment before signing the permit assessor portion
• Respond to process upsets, leaks and emergency situations (as ERT team member)
• To support maintenance activities/other departments/shifts on shortage of manpower
• Monitor, report and intervene any unsafe conditions and situations
• Raise concern on MOS, safety critical equipment and MOC/PSSR as required
• Other duties as assigned
• Good team worker, good communication skills, safety/process knowledge and troubleshooting skills are prerequisites
• Work 12-hour shifts and be physically fit
• NITEC in Chemical Process Technology with 1 to 5 years of working experience in Chemical/Pharmaceutical, Oil and Gas manufacturing industries
• Good understanding in general EHS practices
• Fluent in English (written and verbal)
• Candidates need to be trustworthy, hands-on, take full ownership/responsibility of their roles and responsibilities. Can-do attitude, flexible approach and provding full support to the Site Management team are key.

· Adhere to all Singapore safety standards, rules and regulations as well as group

legislative safety requirements while executing tasks.

· Perform routine and non-routine preventive maintenance activities in one or more

designated work areas.

· Assist in necessary troubleshooting on machines and equipment (motors, bucket

elevators, pneumatic gate valve, solenoid valves, air slides, mechanical/rotating

parts and so on) as and when required.

· Assist in shipment receiving activities and ensure timely completion

· Assist in monthly physical stock check/count as assigned by superior.

· Assist in cement sampling and testing activities during every shipment.

· Assist in maintaining the general housekeeping of the plant at desired level.

· Assist in installation of new assets, equipment and machineries

· Assist in updating and up keeping the maintenance checklist.

· Assist in all other plant/operations related works as assigned by Superior.Qualifications

· NTC / Nitec / Diploma in Mechanical / Electrical Engineering or similar technical certification from a reputable institute.

· Able to read basic schematic drawings or circuit diagram. (added advantage)

· Relevant working experience. Hands-on knowledge on welding, cutting and so on will be an added advantage. · Knowledge in Microsoft Office. (added advantage)

· Able to work in a shift when required

ALG is currently hiring NDT Technicians for our internationally renowned airline client based in Singapore. This role will be on a long-term contract with option extension and a chance for permanent role conversion should you excel.

Job Responsibilities:

• Assist NDT and BSI Authorisation Holders to perform NDT and BSI inspections on aircraft structures and components/parts/engines/APUs.
• Carrying out and certifying inspections in the NDT method specified in their authorization where applicable
• Maintain good housekeeping, documentation, equipment, and tools to ensure compliance with airworthiness standards
• Maintain a high level of situational awareness and by fully compliant in all matters related to general safety and personal safety as guided by company and industrial practices
• Ensure validity of calibration of all inspection and test equipment before use
• Conduct regular checks on chemical expiry and maintain its records
• Carry out any other duties as assigned by Engineering Supervisor (NDT).

Job Requirements:

• Ideally has 1 - 2 years of Aerospace experience and possess NAS 410/ EN 4179 Level I certification on FPI. Other FPI Level 1 certificates can be considered if the candidate can demonstrate his proficiency.
• Able to perform rotating day and night shift.
• Able to effectively utilize lifting devices.
• Fresh entry level candidate preferably with educational qualification in Aviation can be considered.

If you are interested in this role, please APPLY NOW! Please note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R23113794

Job Summary:

The service technician provides efficient after-sales technical services and support, including assembly, PDI, delivery and commissioning, trouble-shooting, maintenance and servicing of equipment and its related parts.

Job Description:

• To attend to, with urgency, all service calls and is responsible to provide efficient and reliable scheduled maintenance for all equipment. To ensure equipment is tested upon completion before handing over to clients.
• To, at all times, represent the Company in the best possible way, and to relate to clients with professionalism and integrity.
• To assemble, deliver and commission equipment at customer sites, and to train users on its operation.
• To observe safety precautions and to execute correct engineering practices at all times so as to minimise risk to self and others as well as damage to equipment and workplace.
• To maintain proper housekeeping and discipline both within the office floor and workshop as well as the client's work site so as to improve operational efficiency, whilst maintaining the good image of the Company.
• To be responsible to comply with the Group and Company Environment, Health and safety (EHS) policies and safe work procedures.
• To carry out service contracts which our company has with customers.
• To prepare parts recommendation of repairs to admin team for customers
• To assist the manager in seminars, workshop and product demonstration on ad-hoc basis.
• To complete service order as per completed job.
• To assist in improving and building up the Service unit to achieve the Company's objective of being a leading service provider in terms of its reliability and professionalism.
• To pursue and achieve total quality and competitive advantage through high degree of self-discipline, commitment and involvement at all levels of the organization as well as with its clients, suppliers and principals.
• Any other duties as assigned by the company.

Experience & Qualification:

• NITEC or Diploma in Automotive Technology, Mechatronics or Mechanical Engineering.
• Overhead crane service and repair experience is preferred.
• With Class 3 license is preferred.
• Able to work independently with minimum supervision.
• Technical knowledge in automotive repairs.
• Team player with good discipline and work attitude.

Job Requirement

• Grow, maintain and transplant flowers, shrubs and trees
• Maintenance and installation of sprinkler systems
• Construct walkways, walls and small foot bridges
• Follows plans and specifications, inspects and directs the planting of landscape material associated with improvement, beautification, and erosion control
• Create and adhere to various watering and feeding schedules
• Plan new growth planting patterns in distinct seasonal changes
• Identify detrimental insects or plant disease and eliminate them
• Ability to adhere to a predetermined budget
• Operate a variety of mechanical equipment
• If certified or under the supervision of a certified applicator will apply chemicals

Requirement

• Primary/Secondary/’O’ Level Education with relevant landscape gardening experience.
• With WSQ Landscape Operation (Entry Level) Certification will be an advantage.
• No age limit with ability to work outdoors.
• Physically fit to handle tools and move around easily during work.

Working Hours and Office Location:

· 5.5-day work week

· Office location: Mandai Estate

· Work location: Various Sites

Responsibilities:

• Conduct product benchmark and qualification testing.
• Monitor product on-going reliability performance.
• Compiling and reporting of evaluation test results.
• Setting up, maintenance and calibration of test equipment.
• Participate in laboratory safety and quality management system audit
• Perform ad-hoc administrative works for Singapore Technical Centre (STC) laboratory including laboratory housekeeping, stock check and inventory of chemicals and consumables etc.

Requirements:

• Minimum Diploma in Electrical Electronic Engineering or related disciplines.
• At least 1-2 years of relevant work experience.
• Good team spirit and sense of accountability.
• Strong communication and interpersonal skills.
• Proficient in both English and Chinese languages as liaison with China and Hong Kong counterparts is required.
• Self-motivated, positive mindset and pro-active.

Job title will commensurate with qualifications and experience. Seasoned candidates with relevant experience may be offered an Assistant Engineer title.

About GP Batteries

GP Batteries International Limited is principally engaged in the development, manufacture and marketing of batteries and battery-related products. Since its establishment under Gold Peak Technology Group in Hong Kong, GP Batteries has rapidly expanded to become one of the world's major suppliers of primary and rechargeable batteries. It is one of the largest consumer battery manufacturers in China. It supplies an extensive range of battery products to original equipment manufacturers, leading battery companies as well as consumer retail markets under its own GP brand name.

GP Batteries' production facilities are located in China, Vietnam and Malaysia, supported by marketing and trading offices spanning across Asia, Europe and North America. The Group currently employs about 5,200 people worldwide and occupies a total floor area of approximately 307,800 square metres.

We offer attractive salary, fringe benefits and long-term career development opportunities to the right candidate. Interested parties, please upload your full resume (include current and expected remuneration package).

We are an equal opportunity employer. The information you provide will be treated in strict confidence and used for recruitment purpose only. You may visit us at www.gpbatteries.com for more information.

We regret to inform that only short-listed candidates will be notified.

Responsibilities:

• Executing electrical preventive maintenance to maintain and sustain the food production equipment, facilities and electrical system.
• Supporting Engineers in setting up of the new equipment & systems and transfer equipment for new projects.
• Troubleshooting, maintaining and repairing equipment and electrical / electronic systems.
• Preventing fire and ensuring safety of personnel and equipment and preventing any incidents and accidents from possible electrical hazards.
• Implementing projects to improve energy efficiency for all of systems.
• Maintaining proper records for works of repairs, maintenances and projects.
• Exhibiting good work discipline and housekeeping habits, and adhering to all safety regulation and house rules at all times.

Pre-requisites:

• Minimum NiTEC in Electrical Engineering or related fields.
• Experience in manufacturing environment with handling machine repair and troubleshooting inclusive of preventive maintenance.
• Salary will commensurate with qualifications and experience.

Summary of Job Scope:

To work closely with Microbiologist, Production, QC personnel and QA department to ensure all apparatus and end products are safe and free from any contamination.

• Perform QC checking, sampling and routine analysis of in-coming raw material.

• Operation of High Performance Liquid Chromatography (HPLC) and laboratory analytical instrument.

• Perform sampling, routine checking and recording of packaging material and printed packaging material (Label, leaflet, unit box, tube).

• Carry out sampling and testing for daily purified water system monitoring.

• Maintain and record retained sample of raw material.

• Maintaining and recording the temperature and room humidity in equipment room.

• On line checking and recording of in-process granules and tablet

• Checking and recording of in-process syrup, cream.

• Checking and approval of packing process.

• Daily stock card update for working standard.

• Perform identification test for in-coming raw material.

• Routine analysis and recording of raw material, intermediates and finished product.

• Carry out stability testing.

• Carry out dissolution profile test and monitoring.

• Carry out Analytical method validation.

• Carry out calibration/ performance verification of laboratory equipment/ Apparatus.

• Quality Control check on raw material dispensing.

• Ensure coding of labels and bar code labels are complete & accurate.

• Preparation and recording of reagents and chemicals.

• Preform analysis and support for working standard preparation.

• Maintain tidiness and cleanliness of laboratory equipment and workplace.

• Practice Good Laboratory Practice (GLP) and laboratory safety.

• Maintain QC document in laboratory to ensure up to date and accurate.

• Update laboratory equipment log book / Quality Control (QC) record book and all other QC documents.

Requirements:

• Diploma/ Degree in Chemistry or related field
• Able to perform independently in a fast paced environment
• Able to perform multi-task as assigned by superior
• No prior experience required (Fresh grads are welcome to apply)
• Must be able commit to OT and Night Shift (when necessary)

CERTIFYING AIRCRAFT TECHNICIAN

RESPONSIBILITIES

• Perform/Certify aircraft maintenance tasks
• Attend to aircraft routine transit/daily/weekly/monthly checks and other line maintenance duties
• Inspect, troubleshoot, and repair aircraft and/or engines and all associated aircraft systems
• Inspect finished work, operation/functional tests and aircraft defect rectification
• Sign-off all tasks performed and comply with Airworthy Release
• Manage and maintain tool & equipment store and provide recommendations, if applicable

REQUIREMENTS

• Applicants must be a Certifying Aircraft Technician in an operational capacity for at least 5 years
• Applicants must have the relevant license from at least one of the jurisdictions, CAAS, Malaysia, HK CAD, New Zealand, Australian CASA, EASA, Brunei, UK
• In addition, at least 2 of the following B1 aircraft-type license certification are a requirement for applicants: B777/787, and A320/330/350/380. (Preferably A330 +A320 and B777 + A380)

Please note that only short-listed candidates will be notified.

You will be joining a team of passionate individuals seeking to provide exceptional care to pets in a challenging and dynamic environment.

We invite you to join us as a Veterinary Technician.

Connect with us at [email protected] if you

• Graduate(d) with Diploma in Veterinary Technology or relevant education.
• Minimally 2 years work experience in veterinary clinic or hospital preferred.
• Could commit to 44 hours work week based on rotation inclusive of weekends.
• Want to grow a career in veterinary industry.

Responsibilities:

• To Perform visual and NDT inspection on aircraft components
• To perform system checks of the NDT processes
• Have the skills and knowledge to set up and standardize equipment, process parts, interpret and evaluate for acceptance or rejection and document the results
• Familiar with the scope and limitations of the technique / method which is certified
• Have the skills and knowledge to conduct system performance checks in accordance with the applicable process standard
• Capable of developing work procedures / instructions from process specifications or standards
• Work closely in accordance with Standard Operating Procedures, Data Cards, Process Controls to achieve the highest quality of work.

Requirements:

• NITEC qualification in Engineering or Diploma In Engineering
• Possess NDT Level 2 (ASNT/APCN Aero/NAS 410/En 4179) in ET and PT or MT
• At least 2 years experience in the NDT inspection for aircraft components
• Candidate who passed M10,CO1CAAS paper will be advantage
• Salary range is commensurate with experience
• Candidates must be able to meet near vision & color perception requirement

• Support Facility Manager to oversee technical operation.
• Plan and implement preventive maintenance work schedule to minimize breakdown or failure
• Supervise and arrangement of repair, maintenance and replacement services
• Main contact person for all technical service contractors
• Manage Technicians
• Supervise repair and maintenance works of technical team and contractors
• Handle defect rectification aspects
• Housekeeping for all work document, including quotation/ tender, checklist, completion sheet, photo record ect.
• Co-ordinate with Facility Manager and Team to facilitate business needs
• Work with different department to fulfill customer procurement procedure & statutory requirements

Job Description:

• Oversee the daily operation and maintenance of facility systems ensuring they remain in optimal, safe, and healthy working conditions.
• Identify the root causes of equipment failures and breakdowns during shifts, taking necessary corrective actions to restore normal operations.
• Perform daily tasks assigned by the Facility Manager (mechanical/electrical), keeping daily log records of activities and noting any issues or irregularities.
• Conduct regular facility inspections, checks, and manual data logging to monitor system performance.
• Assist in preventive and corrective maintenance efforts, including ad-hoc tasks during and after hours, ensuring the reliability of facility systems. Follow work instructions carefully and report any issues promptly.
• Respond quickly to critical alarms, investigate incidents, and implement corrective measures in coordination with the quality, production, and facility teams to resolve issues effectively.
• Address breakdown requests and inquiries from various departments in a timely manner.
• Maintain cleanliness and organization across the facility, ensuring compliance with safety protocols and proper handling of keys, tools, equipment, and documentation.
• Oversee work performed by contractors, ensuring compliance with the company's safety standards.
• Provide training and guidance to facility contractors and janitorial staff to ensure the reliability of building systems and achieve departmental goals.
• Participate in Quality and Environmental, Health, and Safety (EHS) audits, review contractor risk assessments periodically, and understand the permit-to-work processes.
• Assist the Facility Manager with building renovations, refurbishments, and system upgrades as needed.
• Monitor Building Management Systems (BMS) and Room Monitoring Systems (RMS), addressing any system faults and implementing corrective actions when deviations occur.
• Support the Facility Manager during the annual building electrical shutdown and address landlord facility requirements in coordination with the production team.
• Contribute to achieving cost and quality goals, with a focus on improving energy efficiency within the facility.
• Suggest initiatives to reduce utility consumption and adopt an approach for upgrading systems at the end of their lifecycle.
• Keep track of spare part inventory and maintain records of required safety tools and equipment.
• Monitor and track the usage of utilities like electricity, water, office air conditioning, and chilled water.
• Perform additional maintenance tasks such as responding to breakdown calls, power interruptions, light replacements, furniture relocation, event setups, and other duties as assigned by the Facility Manager.

Job Requirements:

• Diploma/Higher Nitec in Facilities Management, Mechanical Engineering, or Electrical Engineering.
• Minimum of 5 years of relevant experience in project management, vendor management, building facilities, and/or the maintenance of manufacturing facilities and cleanrooms.
• Knowledge of HVAC systems and electrical systems would be a plus.
• Familiarity with FMCS and RMS systems would be advantageous.
• Familiarity with ISO 13485, SAP, and regulatory requirements related to facility operations.

HOW TO APPLY:

Interested candidates, please submit your updated resume to

Dora Gan Xin Ping (R2311584) d[email protected]

Attn: Dora Gan Contact 8488 0403 for a confidential discussion.

Please click “Apply Now” button to submit.

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence. By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Job Description:

• Prepare and operate CNC machine tools to perform drilling, milling and other tasks.
• Able to understand the specifications and expected results of the task at hand by reading design drawings, mechanical drawings, etc.
• Translate instructions into computational commands so that the machine can perform the correct function.
• To supervise and monitor when the machine is performing task and able to make necessary adjustments to produce better results.
• Have experience in operatingt a milling machine.

Skills:

• Know Mastercam CNC machining programming software system/G-code.
• Able to read and understand mechanical documents and drawings, such as 2D/3D.
• Must have a basic understanding of computer programming.

Requirements:

• Qualification: ITE/NITEC
• Minimum 2 years of relevant experience
• Bilingual in English and Chinese

Job Description :

· To provide total customer service including M&E maintenance work order.

· To ensure all facilities / equipment are safe and all installations are done according to regulation

· Able to trouble shoot and write job reports

· Attending to customers on call requests

· Experience with all kinds of electrical instruments

· Experience in mechanical & electrical trouble shooting, installation and commission inspection testing on project work skills

· Installation and maintenance of building and plant equipment system, control panel, main switch board and electrical distribution board.

Requirements :

· ITE / NITEC / Electrical with necessary certificates (BCSS, WAH, Perform Work In Confined Space Operation, MEWP certificate and Rigger/Signalmen)

· Must be detail-oriented and able to work independently

· Fluency in oral and written English

· Safety knowledge is highly preferred

Evervet Veterinary Clinic would like to expand our family of paraprofessionals and veterinarians!

We are a team of passionate individuals who strive to provide excellent care and service to our patients and clients.

Our clinic offers both general consultations and a wide range of surgeries. Do you think you have what it takes to be an outstanding Vet nurse?

As a Veterinary Nurse/ Technician, you would be expected to carry out the following duties including but not limited to:

• Handling and restraint of animals
• Surgical preparation and anesthetic monitoring
• Assist with surgical and dental procedures
• Some reception duties
• Triaging of emergency cases
• Care of hospitalized patients
• In-house laboratory/ diagnostic procedures
• General housekeeping

The ideal candidate should possess the following:

• 'O' levels certificate or higher
• Relevant qualifications in veterinary care would be an advantage
• Minimum 1 year experience as a Vet Nurse

You will be required to work up to 5 days per week (inclusive of one weekend).

At Evervet, we are strong advocates for staff welfare. We encourage continuing education so that you may continue to improve your skills.

Do note that only shortlisted candidates will be notified.

Job Type: Full-time

Salary: From $2300.00 (remuneration commensurate with experience)

Please submit your CV to [email protected]

Job Summary:

We are looking for a Senior Technician to oversee the maintenance and repair of hotel equipment and systems. The successful candidate will be responsible for ensuring the smooth operation of all hotel systems, including HVAC, plumbing, electrical, and security systems.

Responsibilities:

- Oversee hotel equipment and systems, ensuring proper functioning and guest comfort and safety

- Troubleshoot and resolve technical issues with hotel infrastructure

- Supervise installations and upgrades of hotel equipment and systems

- Lead and mentor junior technicians, providing training and guidance on hotel-specific systems and procedures

- Perform routine checks and preventive maintenance on critical hotel equipment

- Ensure guest room electronics are in proper working order

- Enforce safety protocols and ensure compliance with local codes and regulations

- Collaborate with other departments to address guest concerns or equipment issues

- Respond to emergency maintenance or system failures

- Monitor and report performance of hotel systems

- Assist in implementing energy-saving measures and sustainable practices

- Oversee inventory of spare parts and tools

- Provide technical support for events

Requirements:

- Diploma or degree in Electrical/Mechanical Engineering or related field

- Minimum 3-5 years of experience in maintenance and repair of hotel equipment and systems

- Strong technical knowledge of HVAC, plumbing, electrical, and security systems

- Excellent problem-solving and analytical skills

- Strong leadership and mentoring skills

- Ability to work independently and as part of a team

- Good communication and interpersonal skills

- Able to work on shift, weekends and public holidays

This position based in Singapore is responsible infrastructure technical support for Asia Pacific (Singapore, Shanghai, Australia, Japan, Indonesia, Vietnam, Papua New Guinea) based ECOM employees (~300) and reports to Infrastructure Manager. This position has frequent contact with internal clients, peers, managers, and vendors.

Job Duties:

- Take ownership as single point of contact, provide response through phone or emails and consistently logging all ICT related issues into ticket management system.

- Unresolved issues, shall escalate to the next level of support.

- Follow up progress of outstanding issues to closure.

- Assist in ICT projects and other administrative tasks.

Responsibilities:

- Provide day to day Level-1 IT support to local and remote users (preferred English, Chinese reading)

- Deploy / troubleshoot PC / Copier / Printer / Phone and network peripherals

- Handle Windows desktop setup, software installation, troubleshooting, performance fine tuning and patching

- Take ownership, follow up, and resolve IT service request tickets

- Liaise with support teams and vendors

- Commission, Decommission Laptop, devices, and server rack equipment

- Manage laptop and IT device inventory, procurement, arrange DHL shipment and disposal process

- Manage user laptop backup

Job Requirements:

- Patient, easy approachable with friendly personality have strong interest in IT industry and service delivery.

- A strong team player.

- 2 to 3 years of IT helpdesk experience

- Possess positive working attitude and interpersonal skills

- Resourceful, able to work independent in a fast-paced environment to meet project deadlines at minimum supervision

Skills:

Diploma in IT-related field preferably Computer Science, Information Technology, Information System, Info-communications, Engineering, Science or its equivalent.

Proficient in Microsoft Windows 10, 11, Active Directory, Azure, Google suite (Mail, Drive, Meet)

Experience in networking (LAN, WAN, DHCP, DNS, TCP/IP, VPN, SSLVPN) with confident analytical troubleshooting skills.

Remote Support tools (Teamviewer)

Digital filing and document imaging system (Laserfiche)

Network security (Malware, Ransomware, Phishing)

Desktop App (Microsoft Office, Antivirus, Citrix client, VPN client, 7-Zip, Java run-time, multi-factor authentication tool, etc…)

Server rack (rack mount, cabling, Router, Switches, vLAN, RJ45 crimping tool, cable tester, Wireless Access Point, Desk Phone, Door access system, Video Conference, etc…)

YOUR AREA OF RESPONSIBILITY:

· Independently repair and troubleshoot pneumatic, electric, and hydraulic lifting equipment

· Assist with emergency and unscheduled equipment repairs

· Ensure all assigned tasks are completed within the specified timelines

· Perform additional duties as directed by the Service Manager

REQUIREMENTS:

· ITE/Diploma in Mechanical Engineering

· 3–5 years of mechanical engineering experience in the hoist and crane industry (mandatory)

· Ability to independently repair and troubleshoot pneumatic/electric hoists and electric overhead travelling cranes

· Possession of a valid Singapore Class 3 driving license is required

· A proactive, can-do attitude, strong multitasking abilities, self-motivation, commitment to customer satisfaction, and the ability to work both independently and as part of a team

· Candidates with extensive experience may be considered for a supervisor role

· Preference will be given to Singaporeans

MNC- Oil & Gas manufacturing company

• Working day: 5 days
• Location: Tuas, shuttle provided
• Overtime pay: 1.5/2 times
• AWS, Bonus, annual leave etc.

Job Scope:

• Implement preventive maintenance and execute maintenance programs for plant and machinery
• Lead Maintenance Technicians in troubleshooting, maintenance, and repair of CNC machinery
• Coordinate and manage sub-contractors for external works
• Identify spares and tools to reduce downtime
• Assign manpower for minor mechanical/electrical repairs in office buildings
• Assist in fabricating tools for production use
• Promote and implement safety practices related to OHSAS and company objectives
• Perform other duties as assigned by Immediate Supervisors

Requirements:

• Diploma holder in Mechanical Engineering or relevant experience
• At least 3 years in Supervisory role preferred.
• Experience in repairing CNC machines is required.

Aurora Asia Pacific (21C0671)|Ying Kee (R21103783)

Job Responsibilities:

• Installation, termination and performing the electrical wiring for control panel, instruments and machine per drawing.
• Assembly and installation of the components and fittings.

Multinational corporation
Basic + AWS + Variable Bonus + Overtime
Good benefit & welfare including medical insurance

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Job Title: Mechanical Engineering Technician (Motors and Engines)

Responsibilities and Duties:

• Inspect and troubleshoot equipment, machinery, and operating systems, identifying and correcting issues as needed.
• Maintain high standards in mechanical operations, ensuring systems meet operational and safety requirements.
• Diagnose and resolve mechanical issues with motors, pumps, conveyors, hydraulic systems, and other related equipment.
• Provide expert-level technical support and guidance to junior technicians when necessary.
• Perform both independently and as part of a team to ensure timely completion of tasks.
• Adhere strictly to company safety guidelines, procedures, and industry standards.
• Conduct regular preventive maintenance on machinery as per established protocols.

Technical Skills:

• Use a variety of hand tools, power tools, and rigging equipment for daily tasks.
• Perform welding using cutting torches as needed for repairs and maintenance.
• Operate and maintain heavy industrial equipment, including forklifts, scissor lifts, basket trucks, and bobcats.

Compliance and Reporting:

• Ensure compliance with both company and customer regulations, as well as policies.
• Maintain and manage personal tools, including keeping an up-to-date, documented personal tool inventory.
• Accurately manage time records and complete work orders in a timely manner.
• Foster positive relationships with both customers and team members through effective communication and professionalism.

ALG is currently recruiting for Trainee Technicians with our Engine MRO client.

This traineeship is an opportunity for aspiring individuals who are keen to join aviation industry but do not meet the pre-requisites as a trained aircraft engine technician. Upon successful completion of the programme, a career as a qualified aircraft engine technician awaits you.

Job Responsibilities:

• The programme involves a fully-sponsored training programme with an allowance over the one-year training period.
• Upon completion of the training, the qualified aircraft engine technician will serve a two-year or four-year bond.
• Career progression opportunity is open to promising technicians.
• The programme encompasses initial company familiarisation, classroom training and on-the-job training.
• The initial familiarisation provides an insight to the working environment prior to attending classroom training.
• The three-month classroom training, consisting of theory and practical sessions, will be conducted and assessed by an external training academy.
• The nine-month on-the-job training provides the opportunity to learn and work on the renowned Engines.

Job Requirements:

• NITEC / Higher NITEC / Diploma in Engineering (eg. Aeronautical/Avionics/Mechanical/Mechatronics/Manufacturing/ Electrical/Precision)
• Completed full-time National Service (for locals)
• Able to perform rotating shift work
• Willing to work in Changi

If you are interested in this role, please APPLY NOW! Please note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R21103388