• Responsible for setting up, maintaining, and troubleshooting automated testing systems used to evaluate the performance of electronic devices.
• Involves programming test sequences and analyzing test results to ensure product reliability and compliance with specifications.
• Focuses on testing entire systems or subsystems to verify that all components work together as intended.
• Involves using various testing methods to assess functionality, performance, and interoperability.
• Specializes in stress testing electronic components by operating them at elevated temperatures and voltages to accelerate aging and identify potential failures.
• Responsible for setting up and monitoring HTOL test conditions, collecting data, and analyzing results to improve product reliability.

• Maintenance and Repairs: Perform routine maintenance and repairs on building systems, including ACMV , plumbing, electrical, and general infrastructure.
• Inspections: Conduct regular inspections to ensure building systems are functioning efficiently and safely.
• Troubleshooting: Identify and resolve mechanical and electrical issues.
• Coordination: Work with contractors and vendors for specialized maintenance tasks.
• Record Keeping: Maintain logs of maintenance activities, repairs, and inspections.
• Customer Service: Respond to tenant or management requests for building-related issues.

Automotive Engineering Technician

1) Singapore class 3 driving license and able to safely operate any light commercial vehicle.

2) Prior knowledge of and able to perform automotive maintenance practices safely, accurately and independently (preferably certified, Nitec or equivalent).

3) Be ready to cover the full duties of any technician at our customers’ workshop sites, including our mobile service, when required.

whatsapp : +65 9837 1821

Job Description:

• Handle Vehicle Diagnostic Tools & Update e-Repairs Documents ,
• Repair or Replace Parts , Oil & Fluid Levels , Wheel Bearings , Car Aircon Compressor Charging , Vehicles.Engine Repair.
• Report to Workshop Maintenance Controller or Team Leaders

Requirements

• Candidates Should Possess A Local Diploma / ITE In Automotive Technology or Mechanical Engineering
• 3-5 Years Experience In the Similar Field With Vehicle Distributors
• Requires A Valid Class 3 / 3A Driving License
• Mondays to Fridays : 0830 to 1730 Hours

- No Quota for WORK-PERMITS ***

Responsibilities

• Perform calibrations and adjustments to meet required standards.
• Set up instrumentation and equipment as needed.
• Conduct fault finding and repairs on equipment.
• Interpret and execute calibration requests from both internal and external customers.
• Provide technical support and product information to internal and external customers.
• Communicate promptly with laboratory management regarding potential or actual issues that require action.
• Liaise with customers to address inquiries and deliver support effectively.

Requirements

• O Level / NITEC in electronics, electrical, mechatronics or mechanical engineering
• Previous experience in service, repair and calibrate a wide range of torque measuring equipment
• Candidates with no experience are welcome to apply.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Job Responsibilities:

1. Monitor food cooking machines and make adjustments to the controls for devices such as boilers, ovens, fryers and cookers.

2. Clean and reinstate work stations, operate cooking equipment and dispose of waste following the SOPs.

3. Monitor food processing equipment and report cases of improper functions.

4. Operate equipment and machinery in food production lines.

5. Check food quantities, container formats and materials against production instructions given.

6. Remove the finished product from the production line and push batches to the next step of the process for packaging.

7. Verify that each finished item meets the quality standards of the company by observing the size, shape and luster of each snack item

8. Other ad-hoc duties as assigned.

Job Requirements:

1. Preferably with experience in F&B sector.

2. Night Shift

3. Must be able to work on weekends and public holidays.

4. Staff Meal will be provided.

• Monitor food cooking machines and make adjustments to the controls for devices such as boilers, ovens, fryers and cookers
• Program kitchen equipment to operate according to company and recipe standards and make changes to cooking temperature and time
• React to any type of alarms or malfunctions of the equipment and operate the shut-off switch when necessary
• Load raw ingredients into the cooking machine and measure the amount needed by following company recipes and industry standards
• Comprehend written instructions and recipes from the company when putting together ingredients and starting a new batch of products
• Remove the finished product from the production line and push batches to the next step of the process for packaging
• Verify that each finished item meets the quality standards of the company by observing the size, shape and luster of each snack item
• Sanitize all materials and machinery parts at the end of each shift and clean the workspace at the worker station by following company cleanliness standards

Ship Repair Engineer

• Location: Penjuru (Transport provided at Jurong East)
• Monday to Friday: 8:00 AM – 5:00 PM
• Saturday: 8:00 AM – 12:00 PM
• Salary: S$ 3,300 - 4,000

Job scopes:

• Manage day-to-day operations and coordination of afloat repairs, load testing & inspection services on ships in Singapore and the region.
• Assist Service Manager in handling the company’s field service operations, in technical, operational and commercial matters
• Prepare quotations, costing for invoice, tools & equipment lists and procurement of parts.
• Manage and coordinate service job execution.
• Liaise with our customers, such as Ship Managers, Offshore Operators, Shipyards, Agents and others
• Manage the tools & equipment which are kept at our warehouse. Send for recertification periodically as required.
• Coordinate with Ship Agents, Ports & Ship Yards, handle permits and schedule service attendances.
• Coordinate and arrange transport of Engineers, tools & equipment to and from job sites
• Answer customer queries and provide remote technical support.

Job Requirements:

• Diploma in Marine Engineering or similar.
• Past experience in marine cranes & deck machinery required.
• Experience in coordinating marine service work, especially afloat repairs will be an advantage.
• Able to commit overtime.

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Service Technician/Technician
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $2600 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform maintenance and repair tasks on various electrical and electronic systems, both outdoors and within the company workshop.
• Troubleshoot issues effectively to ensure minimal downtime.
• All other assigned duties.

APPLY NOW!!!

• Minimum Professional Certificate/NiTEC (Electrical & Electronic Engineering / Electrical Engineering).
• At least one year of experience in customer support and repair of forklifts, automobiles, and heavy industrial equipment.
• Must have knowledge of AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65053 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Assemble & Test Trainee/Assembly & Test Technician
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $2,300 + OT + AWS + VB
• Duration: Permanent

Key Responsibilities

• Acquire skills in assembling, disassembling, testing, and installing products safely and efficiently in the field.
• Ensure proper maintenance and storage of tools and inventories.
• Adhere to established procedures and quality standards in all tasks.
• Maintain accurate records, notably tracking serial numbers for each part and fixture.
• Comply with all safety protocols to maintain a secure working environment.
• Keep the workshop clean and organized.
• Handle additional tasks as assigned.

APPLY NOW!!!

• Minimum 'N' Levels or a National Trade Certificate or equivalent.
• Comfortable working in a warm or factory environment.
• Comfortable with hands-on work and capable of handling physical demanding tasks.
• Inexperienced candidates are welcome to apply as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70176 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Laboratory Technician (Jurong Island)

Responsibilities

• Operates laboratory equipment and instruments to perform laboratory tests according to described procedures for determining the chemical or physical characteristics as quality control, process control and/or product development.
• Communicate results to the relevant operations personnel.
• Responsible for trouble shooting on non-conformance of analysis data and trouble shooting of laboratory equipment and instruments.
• Preventive maintenance of laboratory equipment and instruments.
• Updating existing work instructions, analytical instructions and laboratory records as required.

Requirements

• Min Diploma in Chemistry or equivalent with 1 year of relevant work experience.
• Experience in handling lab equipment such as GC, HPLC, Automatic Titrators, AAS, UV Spectrometer, Glass Oven, Rotary evaporator, Density meter, X-ray, TOC-Analyzer, Molecular sieve, TGA Analyzer etc.
• Strong interpersonal and communication skills and a team player.

Interested applicants please submit your resume to [email protected]

Job Description

• Industry/ Organization Type: IT/Rental (Photocopier)
• Position Title: Copier Technician
• Working Location: Ubi Ave
• Working Hours: 5.25 days (Mon-Fri 8.30am–5.30pm, Alternate Sat 8.30am-12.30pm)
• Salary Package: Basic $3,000 + VB + OT Pay + Company Vehicle Provided
• Duration: Permanent

Key Responsibilities

• Install and set up photocopier machines and connectivity at customer locations.
• Diagnose and repair equipment both on-site and off-site.
• Investigate and resolve maintenance and repair issues.
• Manage tool kits, spare parts, and supplies responsibly.
• Conduct preventive maintenance and adjustments on photocopiers.
• Provide excellent support by responding to customer needs promptly.
• Submit meter readings on time.
• Train and advise customers on machine operation and basic maintenance.
• Interact professionally with all customers.
• Build good relationships with customers and colleagues.
• Perform any other duties assigned by supervisors.

APPLY NOW!!!

• GCE O-Level or higher.
• Has valid driving license to go on site for servicing.
• Experience in repairing/service of copier machines is preferred.
• Customer service skills.
• Basic PC and network knowledge is a plus.
• Training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70878 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Logistics/ Manufacturing & Production
• Position Title: Maintenance Technician/ Facilities Technician
• Working Location: Jurong Island (Company Transportation Provided)
• Working Hours: Monday to Friday, 8 am - 5.45 pm
• Salary Package: Basic Salary + Allowances + OT + Incentive + AWS + PB
• Duration: Permanent

Key Responsibilities

• Perform preventive maintenance and corrective repairs on packaging and conveying equipment, including vehicles, chassis, forklifts, and industrial facilities.
• Troubleshoot and resolve electrical, mechanical, pneumatic, and hydraulic system faults.
• Identify technical issues through inspections and tests; analyze and diagnose malfunctions.
• Use various tools and equipment for diagnosis and repair; order and replace parts, working with suppliers.
• Maintain accurate repair records and parts inventory; communicate findings and repair options.
• Attend to breakdowns, reduce equipment downtime, and enhance performance through quality maintenance.
• Ensure compliance with Health & Safety policies, maintain workplace housekeeping, and follow safe work procedures.

APPLY NOW!!!

• Possession of Diploma, NITEC, NTC-2 or ITC Mechatronic / Electrical Engineering is preferred
• Equipment knowledge - Bagging/ packaging/ conveyor system
• General knowledge of AC drives and electrical motors, pneumatic cylinders and roller/chain conveyors
• Knowledge of PLC, control circuits and electrical system
• Min. 3 years' relevant experience in heavy industry sector
• Experience in Bagging line would be an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65269 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• MNC Company
• Basic $2000 - $2200 + Allowance + OT + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Transport Provided)
• 12 Hours Rotating Shift

Job Responsibilities:

• Perform minor maintenance
• Performing checks, start-up and shutdown operations on process equipment such as pumps and compressors
• Carry out filter changes
• Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations
• Adjusting process parameters to optimize process operations under supervision of Supervisors
• Commissioning and decommissioning of process equipment
• Performing emergency shutdown of process equipment
• Proper handing and blending of non-conforming and off specs products
• Preparing plant equipment for maintenance
• Preparing chemicals, including mixing and dilution, for process operations
• Performing inter-tank transfers of chemicals and products based on established quality procedures
• Performing emergency response activities and drills
• Other ad-hoc duties as assigned

Job Requirements:

• Nitec / Diploma in Chemical Process / Mechanical Engineering / Electrical Engineering or equivalent
• Able to perform 12-hr rotating shift

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC Company
• Basic $2000 - $2200 + Allowance + OT + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Transport Provided)
• 12 Hours Rotating Shift

Job Responsibilities:

• Perform minor maintenance
• Performing checks, start-up and shutdown operations on process equipment such as pumps and compressors
• Carry out filter changes
• Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations
• Adjusting process parameters to optimize process operations under supervision of Supervisors
• Commissioning and decommissioning of process equipment
• Performing emergency shutdown of process equipment
• Proper handing and blending of non-conforming and off specs products
• Preparing plant equipment for maintenance
• Preparing chemicals, including mixing and dilution, for process operations
• Performing inter-tank transfers of chemicals and products based on established quality procedures
• Performing emergency response activities and drills
• Other ad-hoc duties as assigned

Job Requirements:

• Nitec / Diploma in Chemical Process / Mechanical Engineering / Electrical Engineering or equivalent
• Able to perform 12-hr rotating shift

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• To provide maintenance service of all equipment, buildings and facilities.
• Ensure that plant equipment and utilities are operating smoothly with good performance.
• Carry out planned maintenance and breakdown maintenance as instructed by Line Manager.
• Lead repairs, improvement projects implementation and liaise with vendors/contractors on scope of work.
• Provide emergency / unscheduled repairs of production equipment. Perform redesign and improvements to equipment for better capability, performance and ensure compliance to management of change process.
• Keep track of spare part and inventory usage to maintain spare part / inventory control.
• Lead Root Cause Failure Analysis and ensure action follow-up to prevent recurrence of breakdowns.
• To prepare Safety Risk Assessment (SRA), Work Instruction (WI) and Troubleshooting Know-How and other training materials when needed.
• To identify opportunity and drive continuous improvements in cost saving, quality and yield.
• Ensure compliance of company QHSE policy & local EHSS Legislations.
• Participate actively in Quality Health Safety & Environment (QHSE) activities (E.g. Trainings, Concern Reporting, Safety Risk Assessment (SRA) Review, correction of QHSE hazards and unsafe conditions).
• Plan and perform preventive maintenance on all production equipment according to company’s ISO, GMP, HACCP and QHSE requirements.
• Conduct housekeeping in work area and ensure compliance of site safety regulations to prevent accidents.
• Any other duties and responsibilities as assigned to you from time to time.
• Experience in a process plant maintenance.
• Experienced in Rotating equipment, centrifugal, pumps, agitators, compressors, statics, vessel, pressure, tanks, preventive, predictive, major repair & major overhaul.
• Advantages Skills/Certifications : Work At Height(WAH), Confined Space, Vibration, Welding, Forklift, SAP Plant Maintenance(PM) Module, spare parts inventory warehouse management & Risk assessment,

Quality Technician (Jurong Island)

Responsibilities

• Support production shift team with sample testing
• Cleaning and preparation of sampling apparatus, Ampule, gel bottles and other laboratory glassware.
• Prepare reagent and standard sample for analytical equipment.
• Report abnormalities and support troubleshooting of equipment.
• Review and revise for QC process flow, control plan and SOP of analytical such as non-prime product, process problems and complain.
• Investigate root cause and take corrective action plan.
• Planning for analytical process modification and analytical process change.

Requirements

• Min NITEC or Diploma in Chemical Engineering field or other relevant certificates
• Possess Analytical knowledge and Skills such as gas chromatography, gel permeation chromatography, Fourier infrared analysis, gel analysis, Karl Fischer’s method and titration method) are preferred
• Highly motivated, a team player, with the ability to multitask and project management skills
• Understand quality policy and basic rule.

Interested applicants please submit your resume to [email protected]

• To comply with Supervisor’s instructions and perform to achieve quality work
• Installation and maintaining factory facility’s instruments and electrical cabinets
• Plan and perform preventative maintenance on all production equipment according to company's ISO, GMP, HACCP and QHSE requirements
• Ensure compliance of company QHSE policy & local EHSS Legislations
• Participate actively in Quality Health Safety & Environment (QHSE) activities (E.g. Trainings, Concern Reporting, Safety Risk Assessment (SRA) Review, correction of QHSE hazards and unsafe conditions)
• Conduct housekeeping in work area and ensure compliance of site safety regulations to prevent accidents
• Lead repairs, improvement projects implementation and liaise with vendors/contractors scope of work
• Provide emergency / unscheduled repairs of production equipment. Perform redesign and improvements to equipment for better capability, performance and ensure compliance to management of change process.
• Keep track of spare part and inventory usage to maintain spare part / inventory control.
• Assist procurement in providing technical specification for spare parts
• Lead Root Cause Failure Analysis and ensure action follow-up to prevent recurrence of breakdowns
• To prepare Safety Risk Assessment (SRA), Work Instruction (WI) and Troubleshooting Know-How and other training materials when needed
• To identify opportunity and drive continuous improvements in cost saving, quality and yield
• In charge to update all document link to installations (instruments log sheet, electrical cabinet scheme)
• Update technical data sheet on SAP.
• Experience in E&I Maintenance facilities role in Oil and Gas, Chemicals, Petrochemicals industries.
• Operation Knowledge and troubleshooting of Electrical switchgear (22KV/400V/6.6KV), UPS System, Transformer, motor, lights.
• Electrical Shutdown experience maintenance planning, Supervision and LEW coordination (22KV/6.6KV/400V)
• Knowledge in PLC/DCS.
• Ability to interpret P&IDs, PFDs, isometric drawings, and computer literacy.

Job Description

• Industry/ Organization Type: Training courses for sports and games
• Position Title: Technician Installer
• Working Location: Jurong East
• Working Hours: 5 days (Monday to Friday 8.30am – 6pm)
• Salary Package: Basic salary from $2,000 + OT + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Work at heights to install and maintain adventure facilities.
• Inspect, check, and test all safety devices and features.
• Perform additional duties as assigned.

APPLY NOW!!!

• Ability to work at heights.
• Willingness to work overtime.
• Experience in building or installing facilities is a bonus.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #70844 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte | EA License No. 20C0161 | Adelin C | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing – Air Compressor
• Position Title: Service Technician/ Field Service Engineer
• Working Location: Islandwide (Office at Tuas)
• Working Hours: 5.5 days (Mon – Fri: 9.00am – 6.00pm, Sat 9.00am – 1.00pm)
• Salary Package: Up to $4000 + OT + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide on-site support including the installation, start-up, testing, and commissioning of compressor and dryer units.
• Conduct troubleshooting, preventive maintenance, and repair of air compressors and refrigeration dryers, focusing on mechanical, electrical, and pneumatic systems.
• Respond to service calls and perform routine servicing at customer sites.
• Assist in overseeing the production process to ensure minimal breakdowns.
• Prepare and submit detailed repair and maintenance quotations for service and spare parts sales.
• Efficiently plan and coordinate individual service jobs on a weekly and daily basis.
• Conduct technical training to customers as necessary.
• Other ad-hoc duties which may be assigned.

APPLY NOW!!!

• Minimum NiTEC, Diploma or Bachelor’s Degree in Engineering (Mechanical) or Engineering (Mechatronics/Electromechanical).
• At least 2 years of relevant experience.
• Possess Class 3 driving license.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71131 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• MNC Company
• Basic $2000 - $2200 + Allowance + OT + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Transport Provided)
• 12 Hours Rotating Shift

Job Responsibilities:

• Perform minor maintenance
• Performing checks, start-up and shutdown operations on process equipment such as pumps and compressors
• Carry out filter changes
• Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations
• Adjusting process parameters to optimize process operations under supervision of Supervisors
• Commissioning and decommissioning of process equipment
• Performing emergency shutdown of process equipment
• Proper handing and blending of non-conforming and off specs products
• Preparing plant equipment for maintenance
• Preparing chemicals, including mixing and dilution, for process operations
• Performing inter-tank transfers of chemicals and products based on established quality procedures
• Performing emergency response activities and drills
• Other ad-hoc duties as assigned

Job Requirements:

• Nitec / Diploma in Chemical Process / Mechanical Engineering / Electrical Engineering or equivalent
• Able to perform 12-hr rotating shift

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Salary range: $2500 - $3500
• Working days: Monday to Friday
• Working hours: 8am-5pm / 8.30am - 5.30pm
• Working Location: Mandai Estate (Kranji / Yew Tee)

Job Description

• Install, repair, test & commission cable systems (voice/data/fibre optics)
• Performs termination and testing of new cabling
• Prepare / Install cable pathways & supports
• Assist in the preparation of tools & materials used for daily work assignments
• Troubleshoot cabling system issues & perform repairs & maintenance
• Assist co-workers with installation & routine maintenance of structured cabling systems
• Work closely with client to manage schedule operations of assigned duties.

Requirements

• NITEC (Electrical Engineering / Electrical Technology/ Electronic / IT ) or work- related experience
• Class 3 driving license would be advantageous

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Reporting to the Manager in the Engineering Department, the selected incumbent shall assist the Engineering team in the following tasks:

Responsibilities

• Assist in the maintenance of mechanical or electrical installations and equipment within the compound.
• Provide engineering support to all depts if required
• Diagnose and repair faulty equipment, perform preventive maintenance to minimize equipment breakdown.
• Carry out instrumentation calibration activities.
• In charge of maintenance and troubleshooting of entire facility duties.
• Involve in TPM (Total Productive Maintenance) activities.

Requirements:

• Minimum Nitec or equivalent.
• Relevant experience in electrical installation, PLC (Programmable Logic Controller) and electrical maintenance preferred.
• Good technical knowledge with hands-on experience in troubleshooting & servicing HVAC equipment eg chillers, cooling towers, aircon, air compressors etc
• Experience in simple welding, piping work, and simple machining work.
• Computer literacy.
• Physically fit and able to work shifts.
• Positive, easy-going and a good team player.

Note:

Candidate MUST BE willing to wear jumpsuit and mask as Personal Protective Equipment while working in the production area

Interested candidates who wish to apply for the advertised position, please click APPLY NOW.

Alternatively, you may send your application and resume in MS Words format to [email protected] or Whatsapp to 8767 9648

We regret that only shortlisted candidate will be notified.

K N Tan
Registration Number: R1768143
EA Licence No: 17C8778 (JIH SUN EMPLOYMENT AGENCY)

R: N12OPFS46

Job Description

• Industry/ Organization Type: Engineering/Manufacturing
• Position Title: Service Technician
• Working Location: Kallang
• Working Hours: 5 days (Mon – Fri, 8.30 am – 6.30 pm)
• Salary Package: Basic salary up to $2,500 + OT Pay + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Maintain and clean test sockets to ensure proper contact with ICs during testing.
• Inspect test sockets for any physical damage and advise customers if a replacement is needed.
• Perform socket pin replacements and ensure high-quality work.
• Maintain good attendance and provide daily updates on job progress.
• Collaborate with team members to meet customer deadlines.
• Be available for overtime work, including weekends, as per the scheduled plan.

APPLY NOW!!!

• Minimum GCE O Level/NITEC.
• Looking for candidates with attention to detail and strong teamwork skills.
• Ability to work overtime when required to meet deadlines.
• Previous maintenance or service experience is an advantage.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69798 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Maintenance Engineer | 5 Days | Up to $4k | Tuas

Location: Tuas Avenue
Working Days: 5 days (Mon-Fri)
Working hours : 7:30am to 5:15pm
Salary Range: $3k - 4k

Job Responsibilities

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Job Requirements

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant