Job duties:

• Dealing with robotics projects for automobiles
• Troubleshooting electrical and mechanical technical issues
• Conducting electrical assemblies, routing, and harnesses
• Implementing schematics diagram to install and fabricate electrical systems
• Understanding electrical systems and architecture for various forklift or related machines

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

1) Cabin Technician

2) Aircraft & Component Technician

3) Sheetmetal Technician

4) Engine Technician

5) Ground Support Equipment Operator

CABIN AIRCRAFT TECHNICIAN

• To carry out inspection, repair, work on passenger and crew seats, galleys, toilets, aircraft cabin equipment and all fixtures & fittings items associated with the aircraft cabin interior in accordance with the approved company procedures and as per airworthiness and regulatory requirements.
• To remove and replace aircraft parts relating to the Aircraft Cabin to ensure high standards of maintenance of aircraft cabin and furnishings and to ensure the highest standards of passenger safety and comfort.
• Complete and maintain manuals and technical documents pertaining to the repair and maintenance work carried out on the cabin interior.
• Responsible for the cleanliness and tidiness of the working area.
• Monitor, maintain and control the movements of all spares and materials, to ensure their proper usage and deployment, including the returning to stores of all the un-used spares and materials at the end of each shift.
• To perform cabin configuration changes on fleet as per the operational requirements.
• To ensure cabin safety aspects are maintained during cabin maintenance and pay particular attention to Emergency equipment.
• To assist aircraft engineers & technician with regard to daily maintenance activities on the aircraft as assigned by Maintenance Supervisor.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionic Engineering/ Aeronautical Engineering.
• At least 2 years of Cabin Maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

A&C AIRCRAFT TECHNICIAN

• Perform C and D aircraft heavy maintenance tasks as directed by a Certifying Licensed Engineer/Duty Supervisor.
• Perform other tasks that may reasonably be requested by the Licensed Aircraft Engineer/Duty Supervisor.
• To carry out routine aircraft servicing tasks as required in accordance with maintenance manual procedures, observing all safety procedures and manufacturers/company regulations. Depending on the discipline this may include conducting general visual inspections and fluid replenishment system servicing, refuelling etc.To effectively use any specialized tooling or test equipment that may be required as part of the checking, testing, replacement or servicing of a system or component.
• The ability to understand the need for such equipment’s as references in the aircraft manufacturer’s manuals is essential.
• The ability to communicate at various levels, and to coordinate with other areas over technical issues, to ensure that all relevant parties are aware of the aircraft’s serviceability status.
• To ensure the maintenance of tools and equipment in the relevant work place and conducting safe working practices at all times.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of A&C maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

SHEETMETAL AIRCRAFT TECHNICIAN

• To perform Structural Repair as per OEM approved Structural Repair Manual and Repair Disposition.
• To assist Aircraft License Engineer and Supervisory Lead to perform damage/repair assessment.
• To perform part forming such as skin doubler, stiffener and bracket for structural repair proposes in-accordance to OEM approved manual or drawing.
• To perform basic airframe/cabin task as required to facilitate access removal for structural repair.
• Required excellent tool maintenance and housekeeping practices.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 5 years of Sheetmetal working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Familiar on basic structural repair tooling and practices.
• Must be able to work in confine space such as Fuel Tank if needed.
• Capable to interpret OEM Approved Engineering Drawing, Aircraft/Component Maintenance Manual and Structural Repair Manual.
• Able to commit rotating shifts, if applicable.

ENGINE OVERHAUL AIRCRAFT TECHNICIAN

• Perform disassembly/ assembly of engine/ module for repair and overhaul.
• Perform Boroscope inspection
• Install engine components onto the engine/ module.
• Perform troubleshooting, modification and maintenance works

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of Engine Overhaul working experience in Aviation industry, excluding OJT/Helper.
• Able to commit rotating shifts, if applicable.

GROUND SUPPORT EQUIPMENT OPERATOR

• To carry out preventive and corrective maintenance of the GSE
• To ensure equipment decals are visible. Replace if necessary
• Delivery of GSE to and from hangar
• Carry out inspection of GSE around airport bays
• Repositioning of maintenance steps from bays when required
• To ensure all metal structures of GSE are corrosion free by removal of corroded surface and using of corrosion protection agent
• To lubricate all movable joints

Requirements:

• NITEC in Mechanical / Electrical / Mechatronic engineering
• Class 3 or 4T preferred

Field Service Technician

Job Description & Requirements

• On-site servicing, maintenance and installation works at client's site
• Repair and fault rectification on equipment
• Support in preparation of equipment (before delivery) & delivery
• Assisting in Service Centre activities
• Ability to diagnose fault to component level
• Support in-house and field service job
• Other ad-hoc duties as assigned

Requirements:

• Minimum 1 year(s) experience in relevant field
• Good communication, independent, committed, full of initiative, meticulous, good customer service
• Entry-level are welcome but must have willing-to-learn attitude
• Driving license (Class 2 and/or Class 3 manual)
• Able to work overtime (Saturday) when required
• Can start work immediately

Benefits : Good salary package / 5 days / Incentive / AWS

Only shortlisted candidate will be notified

Interested candidate may send in your resume to: [email protected] or whatsapp: 96518935

Job Description

• Perform regular / periodic maintenance for the diving hats, equipment & system.
• Monitor the expiry certs for the gauges, filters & parts.
• Perform function testing for diving systems before deployment to site.
• Inspect, repair and replace mechanical parts for the air compressors.
• Work with high pressure air cylinders and bailout bottles for maintenance / pressure testing.
• Liaise with 3rd party contractors for maintenance works and progress.

Job Requirements

• Familiar with pneumatic and hydraulic systems will be an advantage.
• Those with Class 3 driving license will be an advantage.
• Successful candidates will be sent for Dive Tech Course and all the required training.

Job Title: Steam/Sauna Installer

Summary:

Install, repair, and maintain steam rooms, saunas, and related equipment in residential and commercial settings.

Responsibilities:

• Installation:Install new steam generators, saunas (traditional, infrared), and related components (controls, timers, lighting, ventilation).
  Connect plumbing, electrical, and ventilation systems according to manufacturer specifications and local building codes.
  Install and configure digital controls and automation systems for steam rooms and saunas.
  Properly seal and insulate steam rooms and saunas to prevent heat loss and ensure proper operation.
  Install and test safety features such as emergency shut-off valves and ground fault circuit interrupters (GFCIs).
  
• Repair and Maintenance:Diagnose and troubleshoot malfunctions in steam generators, saunas, and associated equipment.
  Repair or replace faulty components, such as heating elements, and controls.
  Perform routine maintenance, including cleaning, inspecting, and testing equipment to ensure optimal performance and safety.
  Provide preventative maintenance services to customers to minimize equipment downtime and extend the lifespan of their systems.
  
• Other Duties:Maintain a clean and organized work area.
  Adhere to all safety regulations and company policies.
  Participate in ongoing training and professional development to stay updated on industry best practices and new technologies.
  

Qualifications:

• ITE or equivalent.
• Basic understanding of electrical, plumbing, and ventilation systems.
• Good problem-solving and troubleshooting skills.
• Strong attention to detail and accuracy.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Preferably with driving license
• Willingness to learn

Job Description

• Industry/ Organization Type: Manufacturing/Production
• Position Title: Service Technician
• Working Location: Islandwide
• Working Hours: Monday – Friday, 9.00am – 6.00pm
• Salary Package: Up to $3200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Develop and implement solutions to complex technical problems across various industries.
• Conduct field and bench calibrations, gather data, and document the calibration details including range, mA, required output, and accuracy.
• Inspect products and processes for defects and suggest improvements.
• Ensure timely calibration of Master test equipment.
• Analyze and compile technical and statistical information to prepare comprehensive reports.
• Any other task as assigned by the Superior.

APPLY NOW!!!

• Higher NITEC or equivalent.
• At least 3 years in a similar role.
• Valid LEW certification is highly preferred.
• Basic Electrical and Instrumentation knowledge.
• Excellent communication and report writing skills and able to interpret schematic diagrams.
• Open to working across various locations island-wide.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71605 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Engineering/Manufacturing
• Position Title: Technician (PCB)
• Working Location: Kallang
• Working Hours: 5 days (Mon – Fri, 8.30 am – 6.30 pm)
• Salary Package: Basic salary up to $2,800 + OT Pay + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair and soldering of PCB boards.
• Conduct inspections and measurements to maintain high-quality standards.
• Assist and support fellow team members as needed.
• Meet productivity and quality goals.
• Any other ad-hoc duties.

APPLY NOW!!!

• Minimum GCE O Level/NITEC
• Experienced with PCB boards is an additional advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #66282 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing/ Chemical
• Position Title: Maintenance Technician
• Working Location: Tanjong Penjuru (Company transport provided at Buona Vista MRT/ Jurong East MRT)
• Working Hours: Monday to Friday, 8am – 5.15pm
• Salary Package: Up to $4,200 + Shift Allowance + Transport Allowance + AWS + Variable Bonus + Insurance
• Duration: Permanent

Key Responsibilities

• Responsible for maintenance of plant equipment, building utilities, labs, DI station, and WWTP.
• Perform hands-on repair work on various equipment, including centrifugal, lobe, and air diaphragm pumps, tank control systems with agitators, and drum filling machines.
• Manage mechanical and electrical control panel tasks.
• Handle maintenance work orders within the SAP system.
• Preferably experienced in performing preventive maintenance on plant static and rotating equipment, as well as corrective maintenance and modification work.
• Contribute improvement ideas and support SQCDP and 5S initiatives.
• Supervise contractors for repair and project work, ensuring standards are met.

APPLY NOW!!!

• At least NITEC in Electrical/ Mechatronic/ Mechanical Engineering.
• Minimum 4 years of related working experience in electrical wiring troubleshooting and mechanical repairs in a chemical plant.
• Able to perform hands-on repair work.
• Able to understand mechanical hydraulic machine concept/ electrical wiring diagram.
• Prior working experience in waste treatment/ DI plant operation and milling machine would be a plus.
• Able to standby for cases of emergency calls or OT for weekends (if required)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70469 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

* To provide mechanical engineering design expertise during the detailed design phase

* Will be involved in all aspects of the mechanical engineering design and installation supervision

* Engineering package development for cogeneration, flue gas treatment, pressurized equipment, pump, fan, piping etc.

* To prepare tender documents, b i d analysis, operating & maintenance procedures, mechanical drawings and piping layout.

* Assist in the assessment of construction costs, maintenance cost, and safety studies.

Responsibilities:

• Assist Engineer in coordinating and supervising maintenance and overhauling jobs
• Prepare Job Acceptance on completion of Jobs
• Monitor and update job status daily.
• Supervise mechanical / diesel / air-conditioning works
• Liaise with customers and contractors on works to be carried out
• Arrange for inspection / job acceptance
• Carry out general repair and maintenance jobs onboard vessels or in workshops
• Dismantle and troubleshoot for mechanical defects
• Perform testing of equipment to ensure smooth operation
• Perform test run and report to superior on the job completion status

Requirements:

• NTC in Mechanical/Marine/Automotive related field.
• Physically fit with good eyesight
• Possess basic understanding of basic components and functions of mechanical engines or diesel engines
• Able to use IMTE tools such as micrometer, bore gauge and torque wrench
• Able to read simple drawings and service reports
• Possess man management experience for up to 5 technicians
• Willing to work under outdoor environment on site
• Basic working knowledge in MS Word and Excel for status and reporting purpose
• Willing to work in Changi area, with company transport provided

Other Information:

• Location: Changi
• Transport provided at: Jurong West & East, Jalan Bahar, Choa Chu Kang MRT, Bukit Panjang, Woodlands MRT, Bukit Merah, Sengkang, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Are you interested in joining a team that is revolutionising the resource exploration and navigation industry? At Atomionics, we are building quantum sensors using Atom Interferometry - harnessing the potential of the wave-nature of atoms - for resource exploration.

Atomionics is an early-stage, fast growing startup based in Singapore, backed by fantastic investors from the private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other prominent angels.

The Opportunity

This is an exciting role that involves travel, working in dynamic, real-world environments, and hands-on engagement with pioneering quantum technology. As a Field Technician, you’ll play a critical role in supporting the deployment of our unique Quantum Gravimeter at survey sites, such as in the Northern Territory, Australia, and Arizona, USA.

Responsibilities

• Troubleshoot On-Site Issues: Identify and address technical issues on-site promptly, performing necessary repairs or adjustments to maintain sensor accuracy.
• Conduct Routine Inspections and Testing: Regularly assess the performance of equipment, conduct diagnostics, and verify sensor calibration for data integrity.
• Deploy and Maintain Equipment: Set up and ensure proper functioning of quantum sensors and gravimeters in various field locations, including rugged or remote environments.
• Document Procedures and Findings: Maintain accurate records of maintenance activities, troubleshooting steps, and solutions for future reference and compliance.
• Collaborate with Internal Teams: Provide feedback to engineering and operations teams about equipment performance and potential improvements, contributing to product refinement.

About you

• You have 1-2 years experience in a technician role, ideally in a technology-intensive environment, with exposure to sensor or electronics maintenance.
• You have an ITE or a Diploma in electronics, mechanical engineering, or a related field.
• You are proficient in diagnosing and repairing mechanical and electronic systems.
• You are able to work outdoors in varying conditions, and travel frequently to remote locations (Australia, USA, etc.).
• A valid driver’s license and a clean driving record, as regular travel is required.

What we can offer you

• A chance to learn about the intricacies of deep tech research, product development, and strategy in a high-growth startup
• On-the-job training and real responsibility within the business
• Impactful work at the cutting edge of quantum technology
• Board games and curry night

Job Description

• Industry/ Organization Type: Engineering and Trading firm
• Position Title: Assembly Technician
• Working Location: North – Woodlands Industrial Park
• Working Hours: 5 days / Monday to Friday: 8.30am-5.30pm
• Salary Package: Up to SGD 3500 + Bonus
• Duration: Permanent

Key Responsibilities

• Responsible for assembly, debug and test run of customized modular machines and it’s commissioning.
• Provide on-site technical support at customer premise for equipment operation.
• Perform design modifications through: Simplified design, reduced parts, using cheaper alternatives, while maintaining or enhancing the performance of products in terms of cost reduction.
• Procure and/or assist in the procurement of necessary items to enable the performance of above duties.
• Writing and maintenance of all necessary documentations, work and assembly instructions, manufacturing and test procedures.

APPLY NOW!!!

• Min. ITE in Mechanical Engineering
• Knowledge of industrial automation, jigs and fixture design, FMEA, SPC, CAD as well as experience in machine design are added advantages

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71420 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Aircon Repairman TECHNICIAN

A little experience is required

Medium Worker (Basic Salary $1600-1800 + OT)

Head Hand (Base Salary $1800-2000 + OT)

Have a class 3 driver's license salary ($2000-2500+ depending on experience), can speaking simple chinese and english

Working hours: 9.30am-6.30pm

Location: Red Hill

Job Summary

The purpose of this position is to perform field technical work in delivering installation, maintenance, troubleshooting, testing, and repair work for the business.

Key Responsibilities

• Assist to perform the preventive maintenance and corrective work for building services, assets/installations at the client’s premises according to local statutory regulation, HSE, and client’s site-specific requirement, etc.
• Assist to ensure the completion of work orders within the standard KPI/SLAs and the client’s needs are met.
• Support a plant/building shutdown or critical event for the purpose of any preventive maintenance/repairs relating to the assigned asset or equipment and other related operating functions, such as housekeeping, security cameras and access controls, etc.
• Assist to perform regular inspections and inventory of tools, vehicles, and equipment used on the agreed cycle.
• Assist to close the service requests from customers within the service level agreement
• Assist Prepare and submitting a timely incident report
• Assist in follow-up scheduling of equipment daily/weekly maintenance work or a job request.
• Make recommendations to the management on ways to improve the facilities.
• Assist with any additional/ad-hoc duties as assigned by superiors as and when the need arises

Required Knowledge and Skills

Technical Knowledge & Experience:

• Minimum Three year experience in building facilities or related environment
• Welcome fresh Nitec/Diploma holder
• Knowledge in Mechanical/Ventilation and Air Conditioning (MVAC) System, Building M&E services functions are an added advantage
• Possesses strong leadership and interpersonal skills, self-motivated, problem-solving skills and able to communicate well at all levels
• Must be a team player, and have a sense of responsibility to meet the objectives of the organization
• Hands-on experience on mechanical and electrical troubleshooting.

Communication:

• Excellence in English
• Ability to work in a team environment and be independently motivated.
• Ability to respond effectively to the most sensitive issues.
• Ability to write technical reports or manuals.

Qualifications and Education:

· Possess at least a NITEC in Electrical or Mechanical Engineering or any related field

· Possess a valid Class 3 Singapore Driver’s license compulsory.

Roles and Responsibilities:

• Perform daily operational activities which includes attending to customers' enquiries, needs and complaints
• Perform preventive and breakdown technical support and maintenance for mechanical/electrical services, plumbing & sanitary services, Aircon servicing and maintenance, ACMV systems, chillers, and electrical control Working in Grade A Commercial Buildings

Requirements:

• Nitec in Mechanical / Electrical or related field
• Candidates with 2 years or more related experience in Facilities Management will be an added advantage.
• Positive attitude, good interpersonal and customer-centric skills
• Shift work required (3 shifts: Morning, Afternoon and Night)
• Working Location: CBD

We are looking for new colleagues! Are you a Veterinary Technician or Nurse who has registration with professional veterinary associations (American/ Australian/ British/ Canadian) with work experience in a specialist referral hospital/ advanced or general practice?

Start a conversation with us via [email protected] if you have the following credentials:

• Degree, Diploma or certification (American/ Australian/ British/ Canadian) in Veterinary Technology/ Nursing relevant studies.
• Minimal 5 years of work experience in anesthesia/ cardiology/ diagnostic imaging/ ECC/ internal medicine/ oncology / ophthalmology/ radiology or surgery within a clinical practice.
• 2 years prior team management experience preferred.
• A team player with excellent interpersonal and concise communication skills.

Work scope:

• Live and exemplify the Five Principles of Mars, Inc. within self and team.
• Be the extra eyes, ears and hands for the veterinarian to ensure the best quality pet care and to maximize the veterinarian’s productivity.
• Lead communications with veterinarians and veterinary medical team to maintain the flow of pets.
• Provide professional, efficient and exceptional service at all times. This includes performing procedures that do not require veterinarian assistance, completing preparatory work for other procedures, ensuring that clients and pets are comfortable in the hospital, and monitoring hospitalized or surgical pets.
• Obtain relevant information and history from clients to maintain proper and complete medical charts.
• Ensure the safety of pets, clients and associates by utilizing safe restraining techniques, following standard protocols while maintaining clean, sterile and organized treatment areas, exams rooms and labs.
• Educate clients about preventive care, pet health needs, any diagnosis or treatment, hospital services and other related matters.
• Assist with surgery as applicable.
• Utilize technical skills to the fullest, within mandated regulations regarding duties of credential veterinary technicians.
• Other job duties as assigned.

Element has an opportunity for a Senior Test Technician to join our rapidly expanding team. As a member of the operations team, the Senior Test Technician position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

Job Duties:

• Carry out oil sampling at customer site located around the island
• Work together with a team mate and a customer's representative to the various electrical installations for the sample collection
• Other tasks include disposal of waste oil, packing of oil samples for freight, housekeeping and etc

Job Requirements:

• Familiar with workplace safety and health requirement
• Work at height is required
• Possess a valid Class 3 driving licence
• Able to work independantly with minimal supervision and a team player with good communication skill
• Able to understand customer requirement and perform work in accordance to customer specification

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of experience with Advantest 93000/Teradyne J750.
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Responsibilities:

1. Monitor food cooking machines and make adjustments to the controls for devices such as boilers, ovens, fryers and cookers.

2. Clean and reinstate work stations, operate cooking equipment and dispose of waste following the SOPs.

3. Monitor food processing equipment and report cases of improper functions.

4. Operate equipment and machinery in food production lines.

5. Check food quantities, container formats and materials against production instructions given.

6. Remove the finished product from the production line and push batches to the next step of the process for packaging.

7. Verify that each finished item meets the quality standards of the company by observing the size, shape and luster of each snack item

8. Other ad-hoc duties as assigned.

Job Requirements:

1. Preferably with experience in F&B sector.

2. Night Shift

3. Must be able to work on weekends and public holidays.

4. Staff Meal will be provided.

• Monitor food cooking machines and make adjustments to the controls for devices such as boilers, ovens, fryers and cookers
• Program kitchen equipment to operate according to company and recipe standards and make changes to cooking temperature and time
• React to any type of alarms or malfunctions of the equipment and operate the shut-off switch when necessary
• Load raw ingredients into the cooking machine and measure the amount needed by following company recipes and industry standards
• Comprehend written instructions and recipes from the company when putting together ingredients and starting a new batch of products
• Remove the finished product from the production line and push batches to the next step of the process for packaging
• Verify that each finished item meets the quality standards of the company by observing the size, shape and luster of each snack item
• Sanitize all materials and machinery parts at the end of each shift and clean the workspace at the worker station by following company cleanliness standards

Position: Cabling Technician

• Salary range: $2500 - $3500
• Working days: Monday to Friday
• Working hours: 8am-5pm / 8.30am - 5.30pm
• Working Location: Mandai Estate - Kranji / Yew Tee

Requirements

• NITEC (Electrical Engineering / Electrical Technology/ Electronic / IT ) or work- related experience
• Class 3 driving license would be advantageous

Job Description

• Install, repair, test & commission cable systems (voice/data/fibre optics)
• Performs termination and testing of new cabling
• Prepare / Install cable pathways & supports
• Assist in the preparation of tools & materials used for daily work assignments
• Troubleshoot cabling system issues & perform repairs & maintenance
• Assist co-workers with installation & routine maintenance of structured cabling systems
• Work closely with client to manage schedule operations of assigned duties.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

The jobscopes include:

1) Service of Airconditioner

2) Repair of Airconditioner

3) Good checking, trouble shootings skill in splits, and multisplit type aircon

4) Possess Class 3 License will be an added advanage

5) Have working experience in Agent (Manufacturer) will be added advantage

6) Good Team Player

ALG is currently hiring Aircraft Junior Technicians to work for our Commercial Aviation client based in Changi, Singapore. This role will be on a minimum two-year contract with an extension or a permanent role likely should you excel.

Job Responsibilities:

• Troubleshoot, inspect and perform maintenance on customer aircraft including engine, avionics, and aircraft components.
• Be attentive, and ensure close coordination between other trades (B1, B2, Sheet Metal, Cabin) to ensure continuous smooth progress and completion of the projects.

Job Requirements:

• At least 1 years of relevant experience in aircraft maintenance
• Willing and able to perform rotating shifts, including night shift work (if required)
• Able to read mechanical engineering drawings with the direction of the supervisor

If you're interested in this role, please APPLY NOW! Do note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R2093526

Quality Technician (Jurong Island)

Responsibilities

• Support production shift team with sample testing
• Cleaning and preparation of sampling apparatus, Ampule, gel bottles and other laboratory glassware.
• Prepare reagent and standard sample for analytical equipment.
• Report abnormalities and support troubleshooting of equipment.
• Review and revise for QC process flow, control plan and SOP of analytical such as non-prime product, process problems and complain.
• Investigate root cause and take corrective action plan.
• Planning for analytical process modification and analytical process change.

Requirements

• Min NITEC or Diploma in Chemical Engineering field or other relevant certificates
• Possess Analytical knowledge and Skills such as gas chromatography, gel permeation chromatography, Fourier infrared analysis, gel analysis, Karl Fischer’s method and titration method) are preferred
• Highly motivated, a team player, with the ability to multitask and project management skills
• Understand quality policy and basic rule.

Interested applicants please submit your resume to [email protected]

• To comply with Supervisor’s instructions and perform to achieve quality work
• Installation and maintaining factory facility’s instruments and electrical cabinets
• Plan and perform preventative maintenance on all production equipment according to company's ISO, GMP, HACCP and QHSE requirements
• Ensure compliance of company QHSE policy & local EHSS Legislations
• Participate actively in Quality Health Safety & Environment (QHSE) activities (E.g. Trainings, Concern Reporting, Safety Risk Assessment (SRA) Review, correction of QHSE hazards and unsafe conditions)
• Conduct housekeeping in work area and ensure compliance of site safety regulations to prevent accidents
• Lead repairs, improvement projects implementation and liaise with vendors/contractors scope of work
• Provide emergency / unscheduled repairs of production equipment. Perform redesign and improvements to equipment for better capability, performance and ensure compliance to management of change process.
• Keep track of spare part and inventory usage to maintain spare part / inventory control.
• Assist procurement in providing technical specification for spare parts
• Lead Root Cause Failure Analysis and ensure action follow-up to prevent recurrence of breakdowns
• To prepare Safety Risk Assessment (SRA), Work Instruction (WI) and Troubleshooting Know-How and other training materials when needed
• To identify opportunity and drive continuous improvements in cost saving, quality and yield
• In charge to update all document link to installations (instruments log sheet, electrical cabinet scheme)
• Update technical data sheet on SAP.
• Experience in E&I Maintenance facilities role in Oil and Gas, Chemicals, Petrochemicals industries.
• Operation Knowledge and troubleshooting of Electrical switchgear (22KV/400V/6.6KV), UPS System, Transformer, motor, lights.
• Electrical Shutdown experience maintenance planning, Supervision and LEW coordination (22KV/6.6KV/400V)
• Knowledge in PLC/DCS.
• Ability to interpret P&IDs, PFDs, isometric drawings, and computer literacy.