ROLE PURPOSE

The Instrument/Fire & Gas Technician conducts the mechanical completion, pre-commissioning, and supervises the Discipline Technicians.

ROLE CONTRIBUTION

To successfully complete Mechanical Completion, Pre-commissioning, and Commissioning activities according to the project completion plan and schedule, the Instrument/Fire & Gas Lead Technician should:

• Understand their roles and responsibilities and ensure compliance.
• Comprehend the project completion execution plan from the Discipline Superintendent.
• Familiarize with the Notification of Energization (NOE) Flow Chart.
• Fully understand System Drawings and Walk Down procedures.
• Complete a Daily Report to provide clear visibility to the Discipline Superintendent.
• Attend the Daily Discipline Toolbox Talk to address any hazards and environmental impacts.
• Prepare PTW, JSA (Job Safety Analysis), and TRA (Task Risk Assessment) as applicable in GEMS.
• Perform Mechanical Completion Activities (‘A’ Scope ITRs) in close cooperation with the construction team, ensuring compliance with project drawings and specifications.
• Conduct Pre-commissioning Activities (‘B’ Scope ITRs) in line with vendor documentation and specifications.
• Prepare and perform the Operation Test Procedure (OTP) under the supervision of the Discipline Superintendent.
• Supervise Discipline Technicians to ensure they are familiar with project requirements and safety rules.
• Demonstrate consistent Pre-Commissioning Progress.
• Utilize specific tools and test equipment for system commissioning safely and with quality.
• Assist field service vendors in conducting system commissioning.
• Monitor vendor work scope and activities.

This role is essential for ensuring that instrumentation and control systems and equipment are in safe condition and meet safety and technical standards.

EDUCATION, EXPERIENCE & CERTIFICATION

Education:

• Technical College diploma in Automation, Instrumentation & Control, or Electrical disciplines or equivalent.

Experience:

• Minimum of 6 years’ experience in construction or commissioning in Offshore products and systems. Experience with FPSO is strongly preferred.
• Proficient with Completions Tools (ECOM) and documentation.
• PTW and JSA.

Discipline Skills:

• Assisting the yard team with Instrumentation installation and performing Pre-Commissioning / Commissioning for Instruments on Topsides, Vessels, and various packages.
• Knowledge of control systems including ICSS and PLC systems. Experience with Siemens PCS7 DCS and Siemens loop wiring is a strong advantage.
• Proficient in fault-finding and repairing instrumentation/electronic systems and equipment in Control panels and in the field.
• Skilled in installation, calibration, testing, and troubleshooting for all types of Field instrumentation including Temperature, Flow, Level, and Pressure Transmitters, Analyzers, and condition monitoring sensors for rotating equipment.
• Experienced in Installation, Pre-commissioning, and Commissioning of Fire and Gas detection systems and its associated detectors and executive action means (Fire and Heat Detectors, open path flammable and toxic gas detectors, SDV, ESDV, BDV, etc).
• Experienced in installation, calibration, testing, and troubleshooting for all types of valves, especially control valves (pneumatic, hydraulic, or electrical) and various types of actuators and positioners.
• Skilled in Instrumentation cold and hot loop Checking activity.
• Proficient in interpreting all engineering documents including Instrumentation Datasheets, P&IDs, Cause & Effect Diagrams, Loop Drawings, etc.
• Experience using test equipment including pressure calibrators, HART Communicators, Multimeters, etc.
• Familiar with the concept of Commissioning Systems and representing the same using Limits of System Hanover Documents.

Brunel International S.E.A Pte. Ltd.
UEN No: 199603098R
EA License No: 16S8067
Reza Johannes - R1871121

Hello there! Thanks for clicking on us!

Are you tired of your old job and getting stale due to the repetitive caseloads? Are you looking to bring your skillset and knowledge to the next level? Do you feel underpaid at your current job and is looking for a more competitive package? Or are you just getting out of vet school and looking to embark on your exciting vet journey?

At Advanced Vetcare, we do understand all the challenges of being a vet tech here in our sunny island. We do believe in change, and we always strive to improve in our quality of care for the patients while achieving good work-life balance and fair remuneration for our staff. Currently, we are looking to hire vets at our centrally located Balestier branch. This is our newly opened branch, and we are looking to expand our Balestier vet team. Our main branch is located in Bedok which is a 24h emergency practice.

So what is it like working at AVC ?

At this branch we have a good first opinion caseloads and general health checks which is the best place to build up good rapport with clients. At the Balestier branch, despite having a higher caseload for first opinion patients, we do occasionally get referral cases. Also, we see a variety of species which can range from dogs and cats to small furries and birds as well. On a monthly basis, we do organize clinical rounds to benefit both vets and nurses to continue brushing up our knowledge and to grow as a clinic to provide high standards of care.

Finally, these are all the fancy toys that our practice do own:

1. 16-slice CT Scanner

2. Digital X-ray

3. Ultrasound

4. Fluoroscopy

5. Endoscopy

6. Dental machines and dental radiographs

7. Surgical suites and instruments for most soft tissue and orthopaedic surgeries

8. ChemotherapyHello there! Thanks for clicking on us!

Are you tired of your old job and getting stale due to the repetitive caseloads? Are you looking to bring your skillset and knowledge to the next level? Do you feel underpaid at your current job and is looking for a more competitive package? Or are you just getting out of vet school and looking to embark on your exciting vet journey?

At Advanced Vetcare, we do understand all the challenges of being a vet tech here in our sunny island. We do believe in change, and we always strive to improve in our quality of care for the patients while achieving good work-life balance and fair remuneration for our staff. Currently, we are looking to hire vet technicians at our centrally located Balestier branch. This is our newly opened branch, and we are looking to expand our Balestier vet team. Our main branch is located in Bedok which is a 24h emergency practice.

So what is it like working at AVC bedok?

At this branch we have a good first opinion caseloads and general health checks which is the best place to build up good rapport with clients. At the Balestier branch, despite having a higher caseload for first opinion patients, we do occasionally get referral cases. Also, we see a variety of species which can range from dogs and cats to small furries and birds as well. On a monthly basis, we do organize clinical rounds to benefit both vets and nurses to continue brushing up our knowledge and to grow as a clinic to provide high standards of care.

Benefits of working at AVC Bedok?

Aside from the interesting caseloads, our friendly boss and surgeon has a Membership in Small Animal Surgery. He has a high surgical caseload that covers most soft tissue, oncology and orthopaedic cases. This is the perfect opportunity to impart some of his skills as he loves inspiring young minds. On top of that, internal referral to our 24h branch is fairly straightforward, and you will be able to easily track the progress of your patient between the branch. Also, this can be a good opportunity to progress towards the emergency branch if you would like to challenge yourself further (subjected to approval). We are a firm believer that continual education is fundamental, and we do financially provide for CE programs that you have chosen to participate in. Lastly, we are introducing an induction program for new vets joining our team, to allow your transition into working with us as smooth and comfortable as possible.

Senior Lab Technician

• Working Days: Monday to Friday
• Working Hours: 8:00am to 5:00pm
• Salary: $2,800 – $3,000 + Allowances
• Other benefits: Incentive, AL, Yearly increment, Yearly bonus etc.
• Address: Gul Cres (Gul Circle)

Company background:

A leading Singapore-based Agrochemicals (Pesticide & Fertilizer) Manufacturing & Trading Company.

Job Scope:

• Testing of different materials purchased by company for production of pesticide & their packing as per set specifications.
• Documentation of testing and their findings in according to ISO system and reporting of results to supervisor/ seniorResults shall be traceable to raw data
  All results shall be recorded in print format as well as Soft files
  
• Calibration of lab equipment's on periodic basis and maintain records of such activitiesMaintain Internal calibration record for HPLC, GC, UV, pH Meter etc.
  Train new staff on calibration of different equipment
  
• Record of stock of glassware, chemical, solvent, reference standard and other relevant consumables for smooth operation of laboratory activitiesEnsure all stocks are updated on last working day of every month
  Generate report and discuss for requirements to keep minimum inventory for different materials including chemicals, glassware, reference standards
  
• Co-ordination with production/ warehouse for smooth operation at production floorEnsure activates in lab shall be as per work allocation based on WOSU
  Ensure reports are shared with production promptly
  
• Inform any anomalies to production supervisor/ senior for immediate corrective action
• Ensure all test methods/standards used in lab are validated or supported by some valid reference, if any deviations observed make a not and take corrective action and ensure such deviations do not repeat in futureReport deviation to superior and take corrective action as per discussion, make record of deviations in NCR and record Corrective actions in CAR forms
  
• Use only reference standard with traceability to A- Standards and maintain a minimum quantity of reference standardTesting of technical material to create secondary standard and maintain record of such activity
  Ensure all secondary standards are traceable to A-Standards
  Ensure all A-Standards should have COA through out there shelf life, maintain record of A-Standard consumption
  
• Co-ordinate with outside labs for smooth functioning of production and day to day operations as per requirement
• Training of new staff and help them familiarize with company policies and proceduresIdentify short comings or training need of new staff from day to day work practice
  Communicate training needs with Manager/ Senior
  Decide on training schedule and source of training internal or external with Manager/ Senior
  
• Report your daily work and problems faced, to your supervisor/ senior for quick and long term solution
• Operation of WWT plant and testing of waste water samples as and when requirement arise

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Job Description:

• Ensure Automated Sorting Machine’s (ASM) reliability during operating hours
• Maintenance & Troubleshooting of ASM on site
• Work with machine vendor to draft out preventive maintenance task lists (daily/weekly/monthly/quarterly/yearly) in order to maximise the ASM operation life
• Read and Interpret maintenance procedures, equipment manuals, mechanical drawings and electrical schematics to perform required maintenance, servicing and troubleshooting
• Work with machine vendors to perform emergency maintenance on machine and avoid unplanned downtime
• Develop Training Materials for ASM operations and centreline to ensure machine reliability

Requirements:

• Nitec / Higher Nitec / Diploma in Electrical & Electronic / Mechatronics / Mechanical / Instrumentation Engineering
• Min 2-3 years of relevant working experience in electronic maintenance and repair work on belt, conveyor and pulley systems
• Required to work on rotating shift (day/night) to support 24/7 operations
• Willing to learn and ensure the machine is always ready for usage
• Able to troubleshoot machine problems and document them down for learning
• Willing to learn, take equipment ownership and be involved in ensuring machine reliability
• Solve equipment / system problem(s) through recognized methodologies like root cause analysis

This client company specialized in Precision Surface Finishing Equipment.

Job Highlights

• Location: Ang Mo Kio
• Working days: Monday to Friday
• Working Time: 8.30am to 6.15pm
• Benefits: AWS & Bonus included

Job Responsibilities:

• Perform Lapping & Polishing process
• Machine installation and training

Job Requirements:

• Min. Higher NITEC / Diploma in Electrical or Mechatronics discipline graduates or any technical qualification in Precision Engineering
• Knowledge of Mitsubishi or Siemens PLC is added advantages
• Preferred candidates with min 2-3 Years Working Experience in Precision Engineering machine operation or machinery servicing
• Training will be provided
• Can read technical drawing
• Able to use the measuring tool example micrometre, height gauge, CMM
• Any knowledge on using Auto Cad

Job Description

• Industry/ Organization Type: Manufacture of Electrical Equipment
• Position Title: Service Technician (Electrical Switchboards)
• Working Location: Nearest MRT – Woodlands North/Admiralty
• Working Hours: Monday – Saturday, 8.30am – 6pm
• Salary Package: Up to $2,500 + VB + OT
• Duration: Permanent

Key Responsibilities

• Perform the installation and commissioning of Electrical Switchboards on various sites, ensuring all components meet the required specifications and standards.
• Respond to service calls promptly, providing exceptional on-site service support, and troubleshoot any issues that arise efficiently.
• Maintain continuous follow-up with customers regarding service issues to meet and exceed customer expectations, ensuring satisfaction and service quality.

APPLY NOW!!!

• Minimum qualification of GCE 'N' level or Nitec in Mechanical/Electrical Engineering
• Prior experience working with Electrical Switchboards is preferred
• Inexperienced candidates are welcome to apply as training will be provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70251 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Summary:

• No Experience are welcome to apply, Training Provided!
• Immediate starter will be an advantage
• Multiple departments available - Mechanical / Electrical / Electronic / Industrial etc.

Job Scope:

• Perform testing and troubleshooting on various products/equipment
• Conduct inspections to identify any issues and promptly address them.
• Handle engineering related documents
• Troubleshoot and resolve technical problems, ensuring the smooth operation of the process.
• Ad-hoc tasks assigned by supervisor.

Requirements:

• Min. Nitec in Electrical/Mechatronics/Mechanical Engineering or equivalent.
• Candidate with relevant experience are welcome to apply!
• No Experience are welcome to apply, training provided.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Jasmine Wong (R22107578)

Shift Pattern: 2-2-3 (8am - 8pm/8pm - 8am)

12m Contract (1.5m bonus)

Salary: 2500-3200 + 250 transport / With shift allowances approx. $500-$700

Jobscope:

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspections, material charging, offloading, drum packing, milling operations, and housekeeping per SOP
• Ensure proper communication and handling over of shift duties

For interested candidates, please send your updated resume:

Email: [email protected]

Whatsapp: 96503173

Telegram: @jesswongie

Jessie Wong Yuan Si

R2197171

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

Responsibilities:

• Carry out daily routine checks, troubleshoot, and rectify faults for building facilities and equipment
• Perform preventive maintenance and servicing duties to ensure the proper functioning of building facilities, machinery, and equipment
• Attend to all service requests such as tenants' maintenance requests, painting, and other repair works.
• Coordinate and supervise contractors’ works are carried out according to specifications and contractual terms
• Maintain proper job records, maintenance documentation, and reports in an orderly manner
• Manage machinery/ equipment spare parts inventory which includes replenishing stock, conducting stock counts, and inventory checks
• Carry out other duties as requested by supervisor

Requirements:

• NITEC in building services, Mechanical or Electrical Engineering or equivalent
• Possess at least 2 years’ relevant working experience in retail/ commercial/ hospitality properties.
• Possess a good work attitude and ensures all tasks are performed efficiently
• Able to work independently as well as part of a team in a constantly evolving and fast-paced environment
• Have basic knowledge of MS Office-Word and Excel
• Able to work on shifts (including Sat, Sun and Public Holidays).

Summary Benefit:

• Salary range: $2000-$2500
• Location: Tai Seng (Semicon - Cable, Harness)
• Mon to Fri, Office hours
• MNC with great career progression

Responsibilities :

• Conduct incoming inspections and first article checks on raw materials and components based on written procedures and specifications.
• Oversee the calibration system for instruments, including documentation and procedures.
• Use advanced methods like Six Sigma and SPC to develop effective, maintainable quality systems.
• Operate various hand tools and machines such as screwdrivers, soldering irons, and crimpers.
• Oversee and maintain the quality assurance laboratory and support internal and supplier audits.
• Ensure timely completion of inspection requirements, create necessary certifications, and meet daily quality targets.

Requirements :

• Able to read CAD drawings

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)