Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

Job Description:
We are looking for a skilled and innovative AI System Hardware Engineer to join our team. In this role, you will take ownership of the full hardware R&D process, drive innovation, and ensure high-quality deliverables. If you’re passionate about cutting-edge hardware design and enjoy tackling complex challenges, we’d love to hear from you.

Key Responsibilities:

Lead the entire hardware R&D process, including:

• ASIC bring-up
• Developing hardware design schemes
• Selecting components
• Designing schematics and inspecting PCBs
• Conducting testing, debugging, and ensuring successful mass production
• Design innovative hardware solutions that enhance product functionality, performance, cost efficiency, and quality.

Qualifications:

• Education:Bachelor’s degree or higher in Computer Science, Electronics Engineering, or a related field.
• Technical Skills:Strong understanding of high-speed signal integrity and power distribution techniques.
  Familiarity with modern processors, including GPUs, FPGAs, and X86 architecture.
• Experience:Proven experience with ASIC bring-up and hardware validation.
  Proficient in using testing tools such as power sources, loads, and oscilloscopes.
• Tools:Expertise in hardware design software such as Cadence, Allegro, or similar tools.
  

About Us

Green Link Digital Bank is Singapore's inaugural wholesale digital bank focusing on supply chain finance, mainly serving MSMEs and aiming to help MSMEs grow and improve digitization.

As an Infrastructure Support Engineer, you will be responsible for ensuring the smooth operation and support of our IT infrastructure. You will focus on end-user computing, account management, and asset management within our organization. The ideal candidate will have a strong understanding of Microsoft 365 and possess excellent problem-solving and communication skills.

Responsibilities

Microsoft 365 Administration:

• Administer and support Microsoft 365 services, including Exchange Online, SharePoint Online, Teams, and OneDrive.
• Configure, manage, and troubleshoot user accounts, licenses, and permissions within Microsoft 365.
• Assist with deployment and migration projects involving Microsoft 365.

End User Computing Support:

• Provide technical support for end-user devices, including desktops, laptops, and mobile devices.
• Troubleshoot and resolve hardware and software issues related to Windows OS and Office applications.
• Ensure users have the necessary tools and resources for effective productivity

Account Management:

• Manage user accounts within Active Directory and Microsoft 365, including onboarding and offboarding processes.
• Implement security best practices for user accounts, including role-based access controls and password management.

Asset Management:

• Maintain an accurate inventory of IT assets, including hardware, software, and licenses.
• Assist in procurement and deployment of IT assets according to company policies and budget constraints.
• Perform regular audits of IT asset utilization and compliance.

Documentation and Reporting:

• Create and maintain technical documentation for processes, configurations, and troubleshooting procedures.
• Provide regular reports on system performance, asset status, and support activities.

Qualifications

• Bachelor’s degree in Computer Science, Information Technology, or a related field (or equivalent experience).
• Proven experience in IT support, particularly in infrastructure support and end-user computing.
• Strong knowledge of Microsoft 365 services and administration.
• Familiarity with Active Directory and user account management.
• Proficient in hardware and software troubleshooting for various operating systems.
• Experience with asset management tools and methodologies.
• Excellent communication and interpersonal skills.
• Strong problem-solving abilities and a proactive attitude.

In Schneider Electric everything we do promotes progress and sustainability for all — our colleagues, customers, partners, and the communities and societies where we live and work. From the products, software, and services driving the digital transformation of energy management and automation to corporate citizenship and volunteer activities, we make an impact by helping people and organizations become more resilient and efficient, more electric and digital.

Which is where you come in. Working at Schneider Electric means working toward a cleaner, better world. You're part of a global team built on inclusion, mastery, purpose, action, curiosity, and teamwork, turning sustainability ambitions into actions.

We are looking for Service Engineer (PLC) to make an impact!

The Role:

As a Services Engineer, you will work within the Services operations team in Singapore and you will be responsible to support any job assign to you to ensure customer satisfaction with Schneider products and its services.

What will you do?

• Perform field service (customer site service) activities involving the installation supervision, commissioning, maintaining, modification, onsite training, system upgrade and repair of Schneider PLC.
• Responsible for a region or subgroup of field services.
• Performs installation supervision and commissioning of Schneider products including day to day service of the same.
• Performs maintenance for Schneider PLC.
• Trains customers on equipment operation and maintenance of Schneider PLC Product.
• Represents Schneider dealing with customer concerns.
• Responsible for identifying and reporting failure modes encountered when in the field. Also responsible for determining the cause of these failures.
• Solve Site problems at customers site and provides reports on these issues.
• Providing 24hrs telephone support for customers.
• Acquisition of Customer Service products.
• Support internal for spare parts warranty, preparation and assembly.
• Improve on site report and process.

What qualifications will make you successful?

• Min Diploma / Degree in Electrical & Electronics Engineering
• Min 3-5 yrs exp. in Oil & Gas sector, Power Generation, Petrochemical technical experience is an added advantage.
• Has experience and skilled in PLC. Technical knowledge of MV and LV equipment will be an added advantage.
• Willing to travel up to 80% within Region.
• Has teamwork and is customer oriented.
• Has good time management and able to work under pressure.
• Excellent verbal and written communication skills in English are essential.
• Ability to interface with all functional areas of the company.
• Skilled in Microsoft Office – Excel, Word and Power Point.

What’s in it for me?

• Global Family Leave
• Comprehensive medical coverage for employee and dependents
• Worldwide Employee Stock Ownership
• …and more!

Let us learn about you! Apply today.

You must submit an online application to be considered for any position with us. This position will be posted until filled.

ROLE DESCRIPTION SUMMARY

In anticipation of future bids and projects in Defence and Public Security sectors, Engineering Department requires system engineers who has a track record of building, deploying and maintaining the IT infrastructure in an enterprise environment. Domain knowledge in enterprise data networks and/or cybersecurity is desirable.

The System Engineer is to assist with IT infrastructure solutions according to project requirements and drive transformation for internal/external customers by adopting established platforms. The candidate will be involved with the requirements gathering, preparation of proposals, and conduct of presentations to customers or system owners. Upon confirmation of projects, the candidate is expected to take on an active role in the definition, procurement, deployment and operations of the necessary IT infrastructure covering but not limited to server hardware, virtualisation middleware, operating system and backup solution etc. Where necessary, the candidate may be tasked to support data networking initiatives, cybersecurity implementations and other COTS deployment depending on the candidate’s technical background and interests. Therefore, a good understanding of cybersecurity principles and concepts such as network segmentation, network access controls and 802.1X is desirable.

KEY ACTIVITIES AND RESPONSIBILITIES

As an IT Infrastructure System Engineer, you are accountable for:

· Assist project or team leads in evaluating and recommending the appropriate IT infrastructure products (commercial or open source) that will meet project or customer requirements

· Take charge or support the deployment of said products, including integration and testing activities at the System-as-a-whole level

· Work with engineers from other disciplines (e.g. software, cybersecurity, integration) in the delivery of turn-key systems or proof-of-concept (POC) initiatives

· Monitor the health of infrastructure services and perform availability management for servers and its services, and assist in the resolution of operational issues

· Create & maintain technical documentation on Operations / Audit Best Practices, troubleshooting & related solutions knowledge base

· Manage the system recovery process (backup/restore of Infrastructure services and critical production server data and image) and assist in preparing incident reports in the event of outages

· Participate in failover or disaster recovery exercises of the IT infrastructure when required

· Deploy security fixes on Infrastructure services in accordance to enterprise vulnerability and patching strategy

· Administer servers, VMware/Hyper-V platforms and domain controllers/LDAP servers.

· Participate in the optimization of system performance and system capacity planning.

· Support deployment/configuration tasks of Cisco switches and network firewalls (Check Point / Fortinet / Palo Alto)

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· Degree in Computer Science, Information Technology or related disciplines

· At least five years of relevant IT experience in designing (not mandatory but preferred), deploying and managing IT infrastructure systems.

· Required knowledge and experience with Windows Server 2k16/2k19, Linux, VMware/Hyper-V virtualization, and Azure Cloud

· Knowledge of infrastructure best practices, system technologies, operation processes and system engineering methodologies

· Working knowledge of cybersecurity technologies will be desirable

· Technical certification in cybersecurity, network or system technologies, such as CCNP, Microsoft Certified: Azure Administrator Associate, VCP (VMware), VMCE (Veeam), OSCP, SSCP etc. will be advantageous.

· Good written and oral communication skills

· Motivated team player with a keen eye for details, but able to work independently as well when required

· Candidate should also be willing to explore new technical domains in order to have a holistic technical view of the digital transformation landscape

About us

Green Link Digital Bank is Singapore's inaugural wholesale digital bank focusing on supply chain finance, mainly serving MSMEs and aiming to help MSMEs grow and improve digitization.

We are looking for an Application Support Engineer to join our exciting team, to play a pivotal role in our banking technology division, responsible for ensuring the reliability, performance, and availability of critical banking applications.

Responsibilities

• Oversee the bank’s portfolio of applications, ensuring their stability, availability, and performance.
• Hands-on work on technical issue troubleshooting and ensure application functionality.
• Participate in the planning and execution of application upgrades and enhancements.
• Monitor system performance, track incidents, and proactively address potential issues.
• Ensure compliance with regulatory and security requirements for banking application.
• Continuously work towards making improvements in the release process.
• Provide regular reports on application support metrics and key performance indicators (KPIs).
• Support project team on DEV, SIT and UAT environment deployment and troubleshooting.
• Familiar with ITIL based Bank IT process, especially on incident, problem and change management.

Requirements

• Bachelor’s degree in computer science, Computer Engineering, Electrical Engineering, or related fields.
• 3 years of Technical/Application Support experience on multi technology platforms.
• Good knowledge on Linux OS, Windows Server, PostgreSQL, SQL Server, Oracle.
• Cross-platform experience and the expertise to identify and resolve integration issues.
• Excellent understanding of the CI/CD practice.
• Familiar with application release methodology.
• Experience in software development lifecycle and agile development methodologies.
• Experience working in a financial services institution with understanding of MAS technology risk requirements.
• Highly self-motivated to excel in assigned tasks and to deliver results for a digital bank.
• Good communication and coordination skills.
• Hands-on development experience is a plus.
• Excited to work in a fast-paced environment.

Software Engineer (SAP Specialist)

Responsibilities:

• Provide SAP Techno-functional Support in FI/CO or SD/MM/PM modules.
• Involve in analysis, design, coding / configuration and testing of SAP System.
• Work with business users to understand their business requirements
• Develop interfaces between SAP with external systems.
• Analyse the software issues, diagnoses the technical faults and suggest the precaution measures along with accurate troubleshooting methodologies
• Ensure safety practices and housekeeping is to be maintained to the highest standard

Requirements:

• Possess a Diploma/Degree in Computer Science / Information Technology or equivalent
• Knowledgeable in SAP and programming languages such as ABAP.
• Good interpersonal, analytical and problem-solving skills
• Minimum 2-3 years of relevant working experience is required

Job Description:

We are looking for an Analog Chip Design Engineer to lead the development of digital standard cell libraries and design advanced analog circuits. You will optimize circuit designs, innovate new digital standard cells, and collaborate with cross-functional teams to meet performance, power, and area requirements.

Key Responsibilities:

• Circuit Design & Optimization: Lead analog circuit design, optimize for speed, power, and reliability using Cadence Virtuoso, Spectre, and HSPICE.
• Digital Standard Cell Libraries: Develop high-performance, low-power digital standard cells.
• Innovative Architecture Development: Research and design innovative digital standard cell architectures and explore new logic families and power-saving techniques.
• Collaboration: Work with layout designers to ensure manufacturability, performance, and adherence to DFM/DFT standards.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. is a plus.
• Experience: 5+ years in high-performance analog design with expertise in deep sub-micron process technologies (12nm and below).
• Skills:
  • Analog Design Expertise: Proficient in transistor-level design, noise analysis, and power optimization.
  • Tool Proficiency: Experience with Cadence Virtuoso, Spectre, and HSPICE.
  • Digital Standard Cell Design: Experience designing digital cells balancing performance, power, and area.
• Communication: Strong collaboration skills and ability to work in cross-functional teams.

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes. Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernising key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernisation.

Logicalis Group has an annualised revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

As we continue to grow as a business, our people are our key differentiator with our competitors, and developing and retaining our talent is a key priority for all of our businesses.

Accountabilities:

• Understand the customer’s network structure and become familiar with the Customer’s network implementation and support processes and procedures to ensure supporting a network with proper SLAs.
• Carry out migrations of existing setup, features, and configuration as required by the customer in a production/testing environment and help improve plans to implement new features to increase the network stability or user requirements.
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up to date software.
• Troubleshoot production issues and network problems to fix any user related issues and work with principal vendors and customer to provide the resolution with in the proposed timelines.
• Raise equipment Return Material Authorizations (RMA’s) and to track till problem resolution and produce incident report for any severity issues that was reported by customers or end users.
• Be available for customers’ questions in assisting their needs to support network related issues and monitor customer network leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.
• Perform the wireless testing across customer’s different locations and identifying or fixing if there are any performance issues or slowness in network for wireless users.
• Identify the principal vendor best practices and only perform changes with customer approval to improve the security levels.
• Co-ordinate between his/her own Global Network Centre for any escalations or major issues and bridge between customer / senior resources / vendor / etc

The Individual and their Experience:

• Minimum 2-3 years of relevant experiences in network operations including wireless technologies.
• Hands on experience in fixing user issues in production environment is essential
• CCNA certified plus any other networking certifications preferred
• Basic understanding about Routing / switching protocols.
• In-depth knowledge on Stacking / L2 technologies / STP / IP Addressing.
• Proficient at performing local / remote IOS upgrades on different products and RMAs for faulty devices in production
• Good understanding about different monitoring tools like Cisco PI / PRTG / Spectrum / Syslog / etc and TCP/IP structure and IP scheme
• Strong knowledge on Wireless / ARP / MAC / L2 loops / Switching.
• Understand DNS / DHCP / Security knowledge is an added advantage.
• Eagerness and willingness to pick up & adapt new technologies and automation.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

You will be a key member of the R&D Digital Translation team established under the Singapore Maritime Institute. The R&D Digital Translation team develops and operates digital and cyber products and translates R&D projects to real world implementations for the maritime industry.

You will be involved in the requirements gathering, development and testing of products as per evolving business needs as part of the end-to-end agile development lifecycle starting from UI/ UX Design to Cloud Engineering & Operations, Software Development, DevSecOps, Quality Assurance and Application Security.

Key Responsibilities

1. Participate in the requirements gathering sessions and contribute to the development of the functional/design specifications

2. Design algorithms and flowcharts to create new software programs and systems

3. Develop clean, efficient and extendable codes using HTML/CSS, Javascript, Java, .NET, React Native and other relevant programming languages.

4. Troubleshooting, debugging, maintaining and improving existing software

5. Perform code reviews and functional testing to ensure that standards are upheld.

6. Continuous review and refactoring code for reusability and reduce technical debt.

7. Work with QA Engineer to prepare test cases as well as entry and exit criteria for SIT and UAT to ensure that user requirements are met as described per product backlog

8. Work with Application Security Engineer to perform System Security Acceptance Test (SSAT), which includes Secure Code Review (SCR), Vulnerability Assessment (VA) and Penetration Test (PT) and remediate the security findings before seeking clearance and approval from CISO and CIO respectively

9. Maintain and update library of reusable APIs, components and modules

10. Develop technical documentation to guide future software development projects

Requirements

1. Background in Computer Science, Engineering or related disciplines.

2. Highly proficient in programming languages such as HTML/CSS, Javascript, Java, AngularJS, Bootstrap or other relevant programming languages

3. Participated in at least one full software or product development cycle, preferably using Agile Methodology

4. Excellent communication skills

5. Teamwork and collaboration skills

6. Possess critical thinking and problem-solving skills

You will be a key member of the R&D Digital Translation team established under the Singapore Maritime Institute. The R&D Digital Translation team develops and operates digital and cyber products and translates R&D projects to real world implementations for the maritime industry.

You will collaborate with various project managers, solutions architect and infra engineers to deliver leading-edge digital solutions and services to meet the business requirements of the maritime community. You are pro-active, self-motivated and resourceful team member with good technical or digital knowledge and possess strong influencing and people handling skills. You are constantly looking at new ways to apply digital technologies to meet business needs and can handle multiple projects concurrently.

Key Responsibilities

1. Design, build and maintain the software development pipeline automation with related toolsets to enable CI/CD

2. Design and implement the infrastructure and operating environment for container-based microservices that will meet the agreed high availability, performance and security requirements

3. Utilise native cloud tools to monitor the health and performance of the production and UAT environments, and automate the alerts as part of the incident reporting framework

4. Work closely with development teams and other internal teams to ensure that solutions are designed in accordance to requirements to facilitate scale/performance, security and operability

5. Work closely with on-site Tenant Facility Management (TFM) team to supervise day-to-day cloud operations which include activities such as regular patching and system configuration

6. Support and ensure that the software releases are aligned with MPA's internal software release and deployment process

7. Facilitate and support troubleshooting or root cause analysis of platform issues or incidents

8. Proactively monitor and identify opportunities for automation, process improvement and architecture simplification

9. Participate in project planning and management activities

10. Research and develop prototype using relevant technologies and trends for continuous improvement of the platform

Requirements

1. Background in IT/Computer Science/Computer Engineering or relevant discipline

2. At least 2 to 3 years of working experience in DevOps automation, containerisation and orchestration

3. Strong knowledge and experience in Microsoft Azure and/or Amazon Web Services and related cloud services (e.g. Azure DevOps, hands-on experience using Azure Administrative portal). Certification(s) in Microsoft Azure (e.g. MCSE: Cloud Platform and Infrastructure or equivalent) and Amazon Web Services will be an advantage.

4. Strong knowledge and experience in software development automation tools

5. Strong scripting skills (e.g. powershell, cli, python)

6. Strong understanding and experience in virtualisation and networking in a container environment such as Kubernetes, Docker

7. Strong understanding of cloud computing/container deployment and management

8. Strong understanding and practice of Agile projects (e.g. SCRUM)

9. Experience in working with Government Commercial Cloud is preferred.

The Site Engineer (Building) is responsible for assisting on the progress of site works and manpower related aspects of the project.

The responsibilities of this position are, and not limited to, as follows:

• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Qualifications and Education Requirements

• Education: Degree in Civil Engineering
• Experience: Prior 3 years experience in building projects

(l) Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• MIn 3 years QAQC experiences in building projects.
• Detail-oriented and have strong communication skills and able to work with people from all levels.

About the Role

We are seeking a full-stack engineer to join our fast-growing fintech startup. You will work closely with the leadership team to define the product and technology direction, with ample opportunities for growth and flexibility.

You Will...

• Own ideas from inception to execution.
• Work directly with the founders to define the product and engineering roadmap.
• Design and implement backend functionality, architecture, and more. You will work independently, be self-directed, and deliver innovative solutions.
• Pave the way for the company to scale to millions of transactions and power unique digital commerce flows.

Skills We Would Love to See

• Design, develop, and maintain web backend applications using TypeScript, Kotlin, AWS Lambda, microservices frameworks, and PostgreSQL.
• Implement automated continuous integration and deployment (CI/CD) pipelines using tools such as GitHub CI, CircleCI, and AWS CDK for infrastructure as code (IaC).
• Design and implement automated testing using frameworks such as Jest and Playwright.
• Develop and maintain APIs using frameworks like Express and Fastify with OpenAPI specifications for external systems, such as online e-commerce platforms or alternate payment methods.
• Develop and maintain integrations with external systems, including payment network providers, financial institutions, payment gateways, and POS terminals.
• Write clean, maintainable, and efficient code that adheres to best practices and coding standards.
• Participate in code reviews and contribute to improving coding standards and processes.
• Collaborate with cross-functional teams to identify and solve complex technical problems.
• Stay up-to-date with emerging technologies and industry trends, proposing new technologies and tools to improve our products and services.

Nice to Have

• Experience with cloud computing platforms such as Amazon Web Services (AWS) or Microsoft Azure.
• Experience with containerization technologies such as Docker and Kubernetes.
• Experience with microservices and serverless architecture using tools like Docker, Kubernetes, AWS Lambda, and AWS API Gateway.

Minimum Requirements

• Bachelor’s or Master’s degree in Computer Science or a related field.
• 0-5 years of experience in developing software applications.
• A good understanding of software design principles and architectural patterns.
• Effective written and oral communication skills, along with excellent interpersonal skills.

Why Should You Join Us?
Open Fabric is a fintech platform that simplifies digital payments and removes friction in the payment process. We operate primarily in Southeast Asia, working with credit and payment providers to help them expand merchant acceptance. Our goal is to create a seamless and efficient commerce network that offers consumers maximum choice and convenience.

Our team comprises industry veterans with years of experience in the fintech space. We are also backed by leading venture capitalists, enabling us to pursue ambitious goals and push the boundaries of what’s possible in online payments.

We are currently looking for talented individuals to join our team and help us achieve our mission. We offer a dynamic and fast-paced work environment where you'll have the opportunity to work with driven and passionate individuals. If you're excited about the problem we're solving and eager to make an impact, we'd love to hear from you.

How to Apply
Come join us! Email your resume to [email protected].

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 3 years working experience on related sites

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 3 years working experience on related sites

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the development of heterogeneous integration process for realizing multi-functional photonic devices. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize die-to-wafer bonding process employing III-V semiconductor material, Lithium Niobate on Insulator (LNOI), and Si-based material platforms.
• Design of experiments (DOE) for various Die-to-Wafer (D2W) bonding methodologies.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experience in semiconductor industry is preferred. Those with strong familiarity with wafer-to-wafer and die-to-wafer bonding process may be considered for a senior position.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the photonic device fabrication based on Silicon-based material platforms (Silicon-on-Insulator, Silicon Nitride, Germanium (Ge), and SiGe), Lithium Niobate, and III-V semiconductor materials. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize integration flow for Silicon Nitride-based and Lithium Niobate-based photonic devices, including lithography, etching, deep-trench, and dicing.
• Design of experiments (DOE) for different process integration flows.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experiences in semiconductor industry, preferably in silicon photonic processes.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the photonic device fabrication based on Silicon-based material platforms (Silicon-on-Insulator, Silicon Nitride, Germanium (Ge), and SiGe), Lithium Niobate, and III-V semiconductor materials. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize integration flow for Silicon Nitride-based and Lithium Niobate-based photonic devices, including lithography, etching, deep-trench, and dicing.
• Design of experiments (DOE) for different process integration flows.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experiences in semiconductor industry, preferably in silicon photonic processes.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the development of heterogeneous integration process for realizing multi-functional photonic devices. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize die-to-wafer bonding process employing III-V semiconductor material, Lithium Niobate on Insulator (LNOI), and Si-based material platforms.
• Design of experiments (DOE) for various Die-to-Wafer (D2W) bonding methodologies.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experience in semiconductor industry is preferred. Those with strong familiarity with wafer-to-wafer and die-to-wafer bonding process may be considered for a senior position.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Permanent, Singapore-based Electronics Service/Application Engineer for Electronics Test and Measurement Instruments. 5 days week (9.00 AM to 6.00 PM) Located near Lavender MRT station.

· Perform hands-on troubleshooting, service and repairs either in house or on-site.

· Provide on-site implementation, commissioning, testing and system integration support.

· On-the-job training is provided.

· Support Existing and New Project

· Any other duties as assign by superior and management

Job Requirements:

· ITE /NiTEC, Diploma in Electronics Electrical Engineering.

· Fresh graduate or 1 year or more working experience

· Preferable experience in Electronics Test and Measurement Instrument/Power Engineering/Battery

· Class 2/3 driver licence.

· Good work ethics and must be willing to learn and follow instructions

Applicants who possess relevant experience and willing to take the challenge are most welcome to apply. Salary will commensurate with years of working experience.

Please submit your updated resume with recent photo in MS Word or PDF format and indicate current and expected salary. Only shortlisted candidates will be notified.

Job Type: Full-time

Job Types: Full-time, Permanent

Salary: $3,500.00 - $5,500.00 per month

Seeking a Frontend Software Engineer to design and implement user interface components for dynamic web applications in ReactJS.

This role involves translating wireframes and mockups into clean, efficient code and collaborating with cross-functional teams to ensure seamless integration with backend services.

You will be responsible for building reusable components, optimizing performance across devices and browsers, and contributing to the development of high-quality, scalable applications.

This is a permanent full-time role

YOUR NEW JOB

• Transform designs into high-quality, responsive Frontend code using ReactJS, HTML5, CSS3, WebSocket
• Develop, test, deploy, & maintain Frontend user interface components with a focus on usability & scalability
• Leverage modern web technologies to create dynamic, interactive web applications
• Build reusable components and frontend libraries to streamline future development
• Optimize web components for performance across a wide array of web-capable devices & browsers
• Collaborate with the design team to enhance overall UI/UX experiences
• Integrate APIs using RESTful services for seamless backend communication
• Work with cross-functional teams to plan, design, & maintain web-based applications built on Java technologies
• Deploy production systems and provide support post-implementation.
• Engage in all phases of the software development lifecycle, ensuring quality and consistency
• Investigate and resolve system issues, ensuring minimal downtime at all times
• Analyze service interdependencies (applications, systems, databases) to identify & address inefficiencies
• Propose and document opportunities for application & process improvements
• Deliver timely solutions while adhering to high development standards

WHAT IS NEEDED FROM YOU

• 3 years hands-on fulltime working experience in ReactJS
• Proven experience in developing web applications, web forms, & enterprise workflows
• 2+ years of expertise in systems analysis, design, and programming
• Hands-on proficiency in:
  Modern JavaScript frameworks such as ReactJS, with a solid understanding of core principles
  JavaScript, including DOM manipulation and modern ECMAScript features
  TypeScript or other type-safe JavaScript variants
  Advanced HTML5 and CSS3
  CSS pre-processors (e.g., SASS, SCSS, LESS) and bundlers (e.g., Webpack)
  RESTful API integration
  Basic knowledge of data structures and algorithms
  Version control systems like Git
• Strong skills in benchmarking and performance optimization
• Fluency in English and Mandarin for effective business communication with Client & Internally

WHAT WILL MAKE YOU STAND OUT

• Experience coding for Mobile Gaming applications
• Mobile App Development Experience (React Native, iOS, Android)
• Experience with WebSocket
• Familiarity with JQuery
• Knowledge of UI/UX design principles
• Understanding of npm & its usage
• Hands-on experience with AWS Services
• Setting up CI/CD Pipelines
• Writing Unit Tests or End To End Testing

Job Summary:

You shall be responsible for research and development of new products, quality control, technical approvals, control of assigned product/product line from conception, prototyping, product testing, final product launches, meeting financial and corporate growth objectives.

You shall participate proactively in overall product strategy, research and development, and driving development schedules and budgets.

You will work closely with in-house designer or external designer, including all functional groups to develop new products or rejuvenation of existing products. This includes sourcing for manufacturers, negotiating, coordinating and visiting factories for quality control and audits.

Job Responsibilities:

• Develop product designs from design staff or manufacturers concepts.

• Review existing products for attribute enhancements and rejuvenation.

• Evaluate and optimize product concepts for technical or mechanical function, manufacturability, packaging and material handling.

• Generate finalised engineering product drawings with critical dimensions, performance specifications, and quality specifications (standards and test procedures).

• Ensures that new products function properly, meet specifications, safety and regulatory standards and timing objectives.

• Generate product prototypes and perform product testing for internal evaluation and consumer feedback.

• Develop and evaluate cost analysis for new and modified product concepts from design through to production and launch to maximise product value.

• Plan and coordinate new product development as part of cross-function. development team including product management, marketing, finance and supply teams. Maintain product development schedules.

• Implement new products from prototyping, mold development, sample production, qualification, evaluation through first production run (launch).

• Set up quality control system and technical support in solving product quality problems with new and existing products.

• Assess, conduct factory visits and audit on manufacturers to ensure durability and quality of products.

• Liaise with testing bodies to ensure that product specifications are met and relevant approvals are obtained.

• Work on special projects as assigned such as evaluating competitive product, new processes, material, technologies and innovation

• Work closely with manufacturer to ensure manufacturability of product in accordance with our specification, performance, quality standards, cost, functionality, marketability and timely launch.

• Conduct market study and research for better product design that meet functionality and manufacturability issues

• Keep abreast of product standards and maintain records of standards.

• Prepare technical/product specifications for marketing purposes.

Job Requirements

• Diploma in a related field.

• Possess 3 years of related experience in research and development of new products.

• Strong creativity and technical knowledge of design, materials, and manufacturing processes (e.g., plastic, metal, textiles).

• Proven ability to develop concepts from design briefs into innovative solutions.

• Solid understanding of consumer needs, product aesthetics, and functionality.

• Excellent organizational skills to manage budgets, timelines, and multiple projects simultaneously.

• Effective communication skills to present ideas to colleagues, manufacturers, and vendors.

• Willingness to travel for factory audits, quality control, and vendor coordination.

We are seeking an experienced and technically skilled Team Lead to oversee the Synapxe observability platform, which includes implementing and managing monitoring, metrics, logging, and visualization systems across mission-critical infrastructure. This role combines hands-on technical expertise with team leadership, requiring a deep understanding of server and network technologies, as well as strong skills in automation and observability tools. The ideal candidate will bring a proactive approach to leveraging new and emerging technologies to enhance system observability and resilience.

• Platform Development & Integration: Partner with vendors and internal teams to design and develop the Synapxe observability platform, integrating AI/ML functionalities for advanced monitoring, logging, and anomaly detection.
• Infrastructure Onboarding: Lead efforts to onboard existing infrastructure devices to the observability platform, ensuring comprehensive system coverage.
• Anomaly Detection & Self-Healing: Implement and optimize capabilities for early anomaly detection, pattern analysis, self-healing, infrastructure resizing, noise reduction, and outage prediction to improve system reliability and reduce response times.
• Visualization & Reporting: Create and maintain visualizations in observability tools, offering unified views for infrastructure and security. Support users in report customization and dashboard creation to facilitate data-driven insights.
• Team Leadership: Guide and mentor team members and junior engineers, fostering a collaborative environment to promote skill development and alignment with organizational goals.
• Technical Support & Troubleshooting: Provide advanced troubleshooting and analysis for platform users and support team members in resolving complex issues. Document processes and create user guides for ongoing support.

Experience & Skillsets

• Minimum of 7 years in an enterprise-level infrastructure environment.
• At least 2 years of experience with enterprise-level monitoring and logging technologies.
• Minimum of 3 years in server or network-related technologies.
• At least 1 year of experience in programming and scripting.
• Strong technical expertise in infrastructure monitoring, logging, and visualization tools.
• Proficiency in server and network technologies and infrastructure automation.
• Knowledge of programming and scripting languages for automation.
• Excellent troubleshooting and pattern analysis abilities.
• Strong leadership, communication, and documentation skills.
• Ability to work collaboratively, fostering a team-oriented dynamic.

ETH Zurich is one of the leading universities of the world with a strong focus on science and engineering. In 2010 it established the Singapore-ETH Centre (SEC) in collaboration with the National Research Foundation (NRF) to do interdisciplinary research on pressing problems.

The Singapore-ETH Centre is home to a community of doctoral, postdoctoral and professorial researchers working in three main programmes: Future Cities Laboratory, Future Resilient Systems, and Future Health Technologies. The centre provides a multicultural and interdisciplinary environment to researchers working on diverse themes, with the shared vision of translating research to practical solutions for more sustainable and liveable cities, resilient physical and social urban systems, and patient-centric healthcare systems.

Project Background

SEC is leading the interdisciplinary Cooling Singapore 2.0 project. The project is dedicated to reducing the urban heat island and improving the outdoor thermal comfort in Singapore. The project has develop a Digital Urban Climate Twin (DUCT) for Singapore. This includes development, deployment and operations of the necessary technical infrastructure and integration of a variety of computational models for anthropogenic heat emissions and urban climate simulations. The project is entering its final phase where is testing and transferring the DUCT to external stake holders.

Task/Job description

We are looking for a talented individual to join our interdisciplinary and international team based at the Singapore ETH-Centre.

Your key responsibilities are:

- Model and simulate the impact of district energy systems (with a special focus on cooling technologies) to urban warming in Singapore.

- Test the Energy system models to fine tune their performance in side the DUCT and de-bug when needed.

- Scenario testing. Carry a sensitivity analysis of the Energy model to understand its performance.

- Integrate these optimization algorithms into the Digital Urban Climate Twin platform.

Requirements

You should have:

- Master’s or PhD degree in Operations Research, Energy Systems, Process engineering, Civil engineering, Mechanical engineering or equivalent experience.

- A good command of scripting and data analysis languages (Python, Matlab, R) is preferred.

- Experience working with model-based energy and/or building systems design is a plus.

- Experience running and testing the energy model City Energy Analyst is a plus.

- Experience working in interdisciplinary teams.

- Excellent presentation and communication skills.

- Competency to execute excellent independent work and engage with external stakeholders.

Information about the application process and contact for applicants

Do not hesitate to contact us if you have any questions at [email protected]

We look forward to receiving your online application with the following documents:

• Curriculum vitae,
• A copy or reference to three of your top publications (if any), and
• Names of two references.

Please note that we exclusively accept applications submitted through our online application portal. Applications via email or postal services will not be considered.

Further information can be found on our website: https://sec.ethz.ch/research/cs.html

The Singapore-ETH Centre is an equal opportunity and family-friendly employer. All candidates will be evaluated on their merits and qualifications, without regards to gender, race, age or religion.