• Reports to APM
• To assist in site supervision structural and architectural works
• Coordinate with consultant RTO / RE.
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submissions
• Produce weekly site progress reports
• Attend subcon meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements
• 5 years HDB experiences
• Building and Architectural experiences
• Conquas Knowledge
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Independent with good communication skill

As an Assembly and Test Central Capacity Planning (ATCP) Engineer at Micron Technology, you will be in charge of PC DRAM component assembly network capacity

Key deliverables:

• drive various capacity improvement activities to meet flexcap target
• drive capacity related fill rate 100%,
• network MSR capacity balance to make the budget and network assets transfer plan
• influence accuracy of Supply Planning Optimization (SPO) loading by site, advise network loading by site strategy through min loading, step up step down and the vertical integration optimization logics.
• take on continuous improvement projects

Key job elements

• Monitor SPO solve for short term, analyze CSM bucket report to ensure that manufacturing sites have the needed capacity to perform as planned.
• Understand the implications of modeling assumptions in CSM and SPO. Understand Capacity parameters of Utilization, EPT, load size, lot size, etc.
• Monitor SPO fill rate and resolve capacity issues impacting the 100% target.
• CSM to SPO master data linkage and drive the quality data input. Monitor SPO solve by sites, and work with supply chain team to influence/improve SPO solve quality.
• Support tactical planning team whenever there is capacity challenge to meet revenue.
• Influence decision making process to optimize the network capacity. Quarterly/Monthly to support network MSR/budgeting/funding activity via network capacity balancing. Coordinate sites to optimize Capital Process by initiating asset transfers in the global network.
• Drive Benchmarking Process. Work with site IE, MFG and Engineering to understand and close the gaps in workstation performance.
• Work with Scenario planning team to execute strategy, and advise sites/other teams on the strategy implementation.

Requirement:

• Bachelors Degree in Engineering, with at least 1year experience in semiconductor manufacturing
• Understand capacity modeling concept.
• Strong analytical skills
• Able to efficiently perform what-if analysis and provide data driven recommendations.
• Good in written communication and presentation skills
• Highly motivated to work in a dynamic environment, with good integrity and character Ability to multi-task and organize work systematically in meeting deadlines without compromising on quality
• Proficient with Microsoft Office Suite applications, etc.

Job Description:

• Manage and maintain Windows servers, including installation, configuration, and troubleshooting.
• Oversee Active Directory services, including user and group management, GPO implementation, and security best practices.
• Develop and maintain PowerShell or other scripting solutions for automation and system management tasks.
• Experience with VMWare and VDI Horizon for virtualization and desktop infrastructure management.
• Familiarity with AWS GCC (Government Cloud) for cloud infrastructure management and security compliance.
• Monitor system performance and implement necessary adjustments to ensure efficient operation.
• Collaborate with other IT teams to support infrastructure projects and resolve technical issues.
• Implement and maintain security measures to protect systems and data

Requirements:

• Proven experience as a Windows Administrator or similar role.
• In-depth knowledge of Windows Server operating systems and Active Directory services.
• Proficiency in scripting languages such as PowerShell, VBScript, or batch scripting.
• Experience with VMWare and VDI Horizon for virtualization and desktop infrastructure management.
• Familiarity with AWS for cloud infrastructure management and security compliance.
• Familiarity with system monitoring tools and techniques.
• Strong problem-solving skills and the ability to work independently or in a team.Excellent communication and interpersonal abilities.
• Relevant certifications such as MCSE, MCSA, or CompTIA Server+.
• Experience with cloud platforms such as Azure or AWS

Scope of Work:

· Planning and design of Civil and Geotechnical engineering works

• Geotechnical Design and Analysis for ERSS work
• Preparation of Plaxis Simulation following the proposed Construction Sequence

· Preparation and design calculations and technical drawings for Civil and Geotechnical Engineering projects

· Preparation of the Impact Assessment Report

· Preparation of the Instrumentation Plan

· Preparation of Geotechnical Interpretation Report

· Execution of the E-Submission via Cornet

· Good opportunities to explore various geotechnical work, such as reclamation, tunneling (TBM/Mining Tunnel), MRT C&C Project etc.

Requirements:

· Candidate must possess at least a Bachelor’s Degree in Civil or equivalent

· Majoring in geotechnical or related subject is an advantageous

· Fresh graduate with strong fundamental geotechnical knowledge is encourage to apply, or good working experience with systematic training is ideal

· Experience in Plaxis, Geo-Studio, Roc Science can be an advantageous but not compulsory

*Only shortlisted candidate will be notified.

Job Purpose

Easmed is looking for a Senior Full Stack Engineer to spearhead the development of applications on mobile, web and IoT devices to address customer needs and pain points.

Ability to demonstrate scalability and stability in development plans will be key the success of the candidate in this role.

Critical Work Functions & Key Tasks

Backend Development

• Expert in NodeJS and Python.
• Expert in Postgres and modern applicable ORMs.
• Proficient in using message queues system for load balancing.
• Expert in programming design principles.

Frontend Development

• Expert in ReactJS.
• Proficient in Web and Search Engine Optimization techniques in React.
• Expert with state management libraries such as Redux or MobX.

General Expectations

• Experience with frontend build tools such as Webpack, Babel, and npm.
• Familiarity with modern testing frameworks for both Backend and Frontend functions.
• Expert in version control systems.
• Proficient in work concurrency and thread management.
• Prior CICD and microservice experience is a plus.

Requirements

• Bachelor's degree in a relevant field.
• Proven experience as a full stack developer working on backend and frontend projects.
• Familiar with cloud hosting and managed services.
• 5 years in relevant programming experience.

Job Responsibilities:

• Render all M&E Engineering support to the M&E Manager/Project Manager for the successful execution of the project.
• Liaise and coordinate with clients, consultants, consultant representative (RE/RTO), relevant authorities and sub-contractors on M&E issues and challenges.
• Coordinate with all M&E subcontractors, as well as project team structural and architectural colleagues to resolve all drawings, site discrepancy or technical issues.
• Attend all project meetings and progress meetings relating to meeting master program schedule.
• Ensure good M&E drawing management and the control of M&E documentation/filing on site.
• Ensure timely production and submission of M&E shop drawings, materials submission and method statements. All M&E shop drawings, materials and method statement are to be approved before use.
• Ensure all M&E site activities are well-planned, well-coordinated and on time.
• Oversee and guide all M&E staff/Supervisors/sub-contractors, ensuring work is carried out in accordance to the approved shop drawings, materials and method statements.
• Prepare accurate and comprehensive M&E progress report with photographs when required.
• Arrange for all M&E T&C works
• Work with Consultants to come out with proper site inspection schedule to be carried out by the relevant government authorities.
• Work closely with EHS Department to ensure strict compliance of safety regulations.

Requirements:

• Degree in Mechanical/Electrical Engineering or related disciplines
• Minimum 3 years’ experience for Main Contractor in project management and/ or site coordination works for building or civil projects
• Strong in communication skill and speak good English
• A team player

We are seeking a results-driven Senior Software Development Engineer to join our high-performing Engineering team at Ground Labs. As a Senior Software Development Engineer, you will join a motivated and multi-talented team of engineers to build powerful products and solve awesome real world problems. This position will be based in our Singapore headquarters and will report into our Engineering Manager.

We are looking for a “hands on” individual who can quickly roll up their sleeves and make things happen. We work on different products & technologies, and the ideal candidate is someone who is a self-starter and is willing and able to learn things on the job fast and well.

At Ground Labs we are a people company - we are proud of what we do and have fun doing it! If you have what it takes to be a contributing member of the team then come be a part of our continued success story and help shape our future.

You will be responsible for:

• Researching new technologies and prototyping solutions
• Preparing or improving software design and architecture
• Managing software availability, latency, scalability and efficiency
• Developing new product functionality and fixing software bugs
• Working with Customer Support and customers to troubleshoot and address issues
• Mentoring other engineers and reviewing their code
• Participating in all phases of software development (specification, design, development, documentation, unit testing)

To be successful in this role, you will need to have:

• A degree or equivalent in Computer Science or related field
• 7 years of relevant industry experience
• Hands-on experience in modern C++ development
• Excellent English written/oral communication skills
• Experience in developing scalable, multi-threaded, low latency components with minimum memory footprint
• Good understanding of: software security; Windows and Linux or Unix systems; databases; computer networks; cloud storage and computing
• Ability to work efficiently with the existing code base
• Ability to take a problem and solve it with minimal supervision

Micron Technology’s vision is to transform how the world uses information to enrich life for all. Our commitment to people, innovation, tenacity, collaboration, and customer focus allows us to fulfill our mission to be a global leader in memory and storage solutions. This means conducting business with integrity, accountability, and professionalism while supporting our global community.

Want to embark on an exciting and challenging career in one of the top global Semiconductor companies? Come and join Micron Semiconductors Test Solutions Engineering department, where you will learn about the top niche testing methodology of Memory devices using state of the art testing platforms. You will be assigned to projects such as the following:

• Develop and maintain test programs of Micron SSD products in high volume manufacturing to ensure Micron SSD products meet their specifications.
• Design new test programs for validation and testing of new SSD product/technology during start-up phase.
• Optimize test programs and test methodology to reduce product test times.
• Automate test engineering processes by writing software scripts to improve efficiency.
• Enhance test coverage to ensure best-in-class outgoing quality.
• Work closely with product and equipment engineering teams to improve overall product yields and equipment efficiency in order to maximize ROI.
• Collaborate with test capacity and manufacturing teams to meet production output goals.
• Develop and monitor process and engineering metrics to ensure stability, efficiency and effectiveness of test processes.

Requirements

• Bachelor/ Masters in relevant Engineering discipline
• Proficient in Python programming
• Proficiency with data analysis tools and manufacturing software support systems (MAM, SAP, etc.).
• General understanding of the back end operations for component assembly, component test operations.
• Has agility to manage and execute prioritized action items from both tactical and strategic point of views.
• Excellent verbal and written communication and presentation skills.

Job Responsibilities:

• Responsible for day to day operations and administration on network & security infrastructure.
• Perform installation, configuration and maintenance of network equipment and network operating System.
• Responsible for network design and security, particularly trouble shooting and/or debugging network related problems.
• IT Network consulting and implementation for new projects.
• Develop and documents systems standards for computer and network device.
• Familiar with Microsoft Azure, Microsoft Office 365, Fortigate Firewall, Cisco Firewall, Wifi Setup, LAN, WAN, Domain, Exchange Server, VMware and Hyper-V.
• Maintain high level of customer satisfaction.

Job Requirements:

• Diploma or Bachelor’s Degree in Information Technology or Computer Science.
• Related experience of IT Network and System Administrator.
• Fresh Graduates are welcome.
• Good analytical and problem solving skills.
• Able to work in fast pace environment and deliver quality work.
• Proficiency in English is essential.

Job Description

• Work with Artwork Designer to provide technical guidance in developing new PCB designs.
• Responsible for training and coaching of new hires.
• Attend project meetings to discuss about project progress and issues.
• Collaborate with cross-functional teams to ensure successful project outcomes.
• Conduct design reviews and provide guidance to team.
• Implement desgin improvements and innovations to enhance product performance and reduce cost.

Job Requirement

• Minimum Bachelor Degree in Electrical/Electronics/Communication/Computer Engineering.
• Minimum 8 years of relevant experience.
• Excellent communication and leadership skills with ability to work effectively in a cross-cultural environment.
• Proficiency with PCB design software such as Althium, ORCAD, Protel, Cadence.
• Willing to travel.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirement

- Diploma/Bachelor's degree in Civil & Structural Engineering

- Mininum 2 - 5 years' experience working in construction industry

A M&E Engineering Consultancy Firm, located at Lavender Street would like to invite application for the following posts:

Electrical Engineer

Responsibilities:

· Project & contract administration.

· Involve in M&E systems design.

· Prepare submission document to all authorities for approval.

· Prepare tender drawings and specifications.

· Calling of tender, evaluation and recommendation of award.

· Attendance of all project meetings.

Requirements:

· Degree in Electrical Engineering recognised by PEB.

· Experience in project management, strong leadership quality and communication skills.

· Resourceful with analytical skill and attitude to resolve site issue tactfully.

· Min. 1 to 5 years working experience in building services.

· Familiar with local Code of Practice & Regulations.

· Proficient in AutoCAD, MS Office, BIM & etc.

Strictly only Singaporean interested applicants are invited to send us your detailed resume, your contact number, current and expected salary.

Our Company is not interested in receiving any phone calls and emails from recruitment agency.

A good employment benefit and good career growth awaits the successful candidate.

We regret that only shortlisted candidates will be notified.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Summary:

• Industry: Healthcare
• Location: Woodlands

Job Responsibilities:

• Work with relevant user groups to prepare medical equipment specifications for ITQ/RFP
• Evaluate ITQ/RFP submissions and provide recommendations based on technical compliance
• Review and make improvement to various programmes to ensure minimal operations disruption and ensure medical equipment is safe for use at all times.
• Provide technical support for commissioning, operation, maintenance, and de-commissioning of medical equipment.
• Supervise the specialist vendors and appointed contractors on medical equipment maintenance works
• Check, analyse, and investigate faults/complaints/hazards on medical equipment and assist in mapping out and implementation of required action plans.
• Ensure quality of works conform to standards and practices that the hospital subscribes to, including other quality initiatives driven by hospital and department.
• Support and assist BME Head in coordinating services for medical equipment projects together with IT, Consultants, vendors, contractors and appropriate authorities.
• Work closely with BME team to support procurement activities and related projects to ensure smooth operation
• Perform any other duties as assigned by BME Head.

Job Requirements:

• Degree in Biomedical Engineering, Electronic or Electro-mechanical Engineering or equivalent
• Relevant industry experience with 5 years’ experience in similar capacity
• Good communication and supervisory skills
• Customer service oriented
• Positive work attitude and ability to work with all levels of staff
• Familiar with Hospital BME functions and processes
• Fundamental IT knowledge (OS, Cybersecurity, and Microsoft office, etc.)
• Those with more experience will be considered for a more senior position

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret that only shortlisted candidates will be notified.

Registration No: R23113834

The successful candidate will be part of the sales team. You will represent the company to promote and sell our range of inspection, maintenance and monitoring products and contribute towards achieving our sales and growth targets.

The role requires the successful candidate to actively hunt for opportunities in the market as well as to develop close relationship with existing customers, thereby always having a finger on the pulse of the market. The successful candidate will need to collaborate closely both within the team and with external stakeholders (customers and principals) to identify and deliver the most suitable product and/or solution to the customer.

Remuneration will be commensurate with experience, consisting of a fixed basic salary along with attractive sales commission and transport allowance.

Responsibilities

• To establish strong network and build close rapport with key decision makers and end-users.
• Highly motivated and results-driven in achieving sales target.
• Prospect, develop and drive sales plan.
• Manage sales strategies to improve market shares and profitability of the business.
• Provides competitor information and market intelligence and assist Sales Manager in the development of relevant sales and marketing strategies.

Requirements:

• An enthusiastic team player who can work independently
• “Hunter” instincts, positive mind-set and “can-do” attitude
• Diploma/Higher NITEC or equivalent in any discipline, candidates with Engineering/Technical background will be preferred.
• Fresh graduates are welcomed to apply. Candidates with sales experience will be preferred.
• Good spoken and written English
• Excellent communication and interpersonal skills
• Preferably with own vehicle (Class 3/3A)

Remuneration

• Attractive Basic Monthly Salary commensurate with relevant experience
• Attractive monthly Sales Commission
• Generous transport allowance if possess own vehicle

Job Scope:

Design/Documentation for automation parts/assembly in Solidworks

Support production for machine modification/customization design.

Requirements:

Diploma/Degree in Mechanical/Mechatronic Engineering.

Minimum 2-3 years relevant experience

Proficiency in Solidworks 3D CAD software

Good communication and project management skill.

Good knowledge of material selections, machined part fabrication and processes.

Good in designing and troubleshooting pneumatic.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Job Scope:

Design & development GUI software for industrial machine.

Requirements:

Diploma/Degree in Electronic/Computer Science Engineering.

Minimum 2-3 years relevant experience.

Proficiency in C/C++/C# multi-threaded programming.

Familiar in linear/servo motor is a plus.

Good communication/documentation and project management skill.

Good knowledge in machine tuning and troubleshooting.

Job Scope:

Design/Documentation for automation parts/assembly in Solidworks

Support production for machine modification/customization design.

Requirements:

Diploma/Degree in Mechanical/Mechatronic Engineering.

Minimum 2-3 years relevant experience

Proficiency in Solidworks 3D CAD software

Good communication and project management skill.

Good knowledge of material selections, machined part fabrication and processes.

Good in designing and troubleshooting pneumatic.

Job Scope:

Design & development GUI software for industrial machine.

Requirements:

Diploma/Degree in Electronic/Computer Science Engineering.

Minimum 2-3 years relevant experience.

Proficiency in C/C++/C# multi-threaded programming.

Familiar in linear/servo motor is a plus.

Good communication/documentation and project management skill.

Good knowledge in machine tuning and troubleshooting.

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.