Mechanical Contractor - Construction

• Basic: $4000 - $5000
• Variable Bonus
• 5 days (Office Hours)
• Location: Pioneer

Responsibilities:

• Work with Process team on in-process audit and FQC Audit.
• Work with Process Engineer & Engineering team on QC requirements
• Contriol of Supplier QUality Assurance (SQA).
• Quality Control of in-coming, in-process and out-going products.
• Prepare and compile report after inspection.
• Plan on construction site visit and liaise with Project Managers or Engineers.

Requirements:

• Min. IT in Manufacturing or Quality Engineering with 1 year of relevant experience.
• Knowledge of IS0 9001, 14001, 13485 & 45001
• Ability to understand DfMA modular prefab requirements, including materials selection and fabrication.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

1.Min. 10 years experience in engineering, maintenance and project execution in controls, electrical and instrumentation in Oil & Gas and Petrochemical Industries.Knowledgeable in DCS, SCADA, IPS, PLC, Interlock Logic Diagrams, Instrumentation Loop Drawings, Electrical Drawings, P&IDs.Competent in handling Honeywell (EPKS) Experion PKS (including back-up restore, HMI Web Builder, PAS Plant State Suite Alarm Management System, Corworx Software and Maximo/SAP.

Deliver all assigned C&N activities in a cost-effective, safe and efficient manner through contractors with minimum interruption to operating plant and ensure field work sequences are aligned,

Lead contractors in field activities with high safety standards; ensure all field activities comply with authorities, industrial and company HSE standards and requirements.

Organize and chair risk assessments discussions to ensure hazard are identified and mitigated for all C&N assigned activities.

Collaborate with stakeholders, coordinates reviews and schedule optimizations, resource leveling etc. and prompt updates to the C&N Work Plan.

Provide conceptual ideas for field route piping and produce quality sketches, Check accuracy of approved construction drawing and documentation for execution. Carry out mechanical line and equipment checks, able to coordinate Civil and E&I activities progress, Support Construability reviews for Projects.

Conduct site inspection and explain work requirements to contractors; develop work plan with contractors, operations, maintenance, and other stakeholders for execution with minimum interruption to operating plant and ensure field work sequences are aligned. Able to coordinate with multi-disciplines during field execution.

Drive Contractors management to deliver contractors productivity improvements, contractors’ competency & assurance, including developing relevant work procedures and QA/QC. Accept or reject the quality of work & goods provided by contractors/vendors.

Establish time schedule/execution plan for more complex project with multi-disciplinary involvement amongst operations, maintenance, and contractors. Approval of construction related method statements.

Prepare and deliver weekly works & field progress report. Support computation and calculation of progress measurement, monitor work progress and able to provide schedule catch-up plan. Validate field work quotations and value of work done (VOWD)

Executes the Quality Assurance and Control Plan and Project Specifications. Reviews and approves Inspection Test Plan (ITP) according to Shell HSSE, Technical, and Process Safety Standards, and relevant industry code.

Perform as Permit Requestor (PR) and Authorized Engineer (AE), including for lifting works, as per SJI Permit to Work (PTW) requirement

Organize Mechanical Completion review and assist in operation readiness review for project handing over.

Carry out any other related duties as required, including temporary assignments in other sections within the MTAC department on site.

Educational Qualifications:

· Diploma/ Degree in Mechanical Engineering

Technical Qualifications:

· NACE Coating Inspector Level 2 (Validity Required)

· Qualified MOM OPSOC (Supervisor) or equivalent

· Qualified MOM CSOC (Supervisor) or equivalent

· Qualified MOM Manhole Supervisor

· Qualified MOM Confined Space Safety Assessor

· Qualified MOM Lifting Supervisor and Rigger/Signalman

· Qualified Work at Height Assessor

Professional Experience:

· Minimum 10 years of relevant experience in oil & gas, chemical & petrochemical industry in the below fields.

o Piping/Pipeline Construction, inspection and maintenance

o Tank maintenance

o Application of Protective Coatings (Organic Coatings, Thermal Spray Aluminum)

o Installation and maintenance of Insulation systems.

· Experience in Plant Turnaround Project planning, preparation and execution

· Experience with catalyst change out is a bonus.

Job Description & Requirements

• Responsible to the Principal Engineer, Piping for the preparation of design as per codes / standards and client’s specifications, requisitions for materials, equipment, valves, etc., and for the timely completion of each planned engineering activity assigned to him / her.
• Review of piping specification.
• Review piping stress analysis calculation.
• Review and finalize of piping routing, piping arrangement and support.
• Review design data for missing and / or ambiguities information.
• Reporting project progress to Principal Engineer, Piping on a weekly basis.
• Implementation of Engineering Procedure, drafting Standards and Quality Management.
• Preparation of proposals / estimations for equipment and tankage works.
• Review engineering calculation and technical specifications of storage tanks, pressure vessels and various mechanical equipment.
• Evaluate vendor’s bids and highlight deviations and omissions to purchasing for further clarifications with vendor.
• Perform any other responsibilities as directed by immediate supervisor.

Qualification & Experience generally required

• Bachelor Degree in Engineering.
• Min 8 years relevant working experience in Mechanical engineering in oil and gas sector or offshore sector.
• Know to use spring hanger in stress analysis.
• Proficient in Microsoft Office products, AutoCAD and Caesar ll Stress Analysis Software.
• Prefer to have at least 5 year of piping engineering related working experience.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Job Responsibilities:

• Oversee C&S design progress against schedule and budget on projects.
• Manage the interfacing with M&E contractors
• Coordinate with engineering consultant, review and comment its design drawings
• Monitor the design progress and statutory submission against project baseline program
• Implement corrective measures for identified distractions or issues.
• Review, negotiate and recommend for approval/disapproval on design change orders.
• Administer design subcontract including processing monthly invoices for payment.
• Coordinate and monitor status of design incentive/disincentive programs complying with provisions of design subcontract.
• Perform constructive reviews conforming design to prime contract requirements and proposal commitments.
• Coordinate and control design submittals for owner’s review and approval.
• Lead a design team for overall C&S and architectural design works, assist QS team for material takeoff and tendering, manage subcontractors and support site construction works
• Facilitate resolving design issues with owner.

Job Requirements:

• Degree qualifications in Civil and Structural Engineering
• Preferably 2 years of relevant expereince in the planning and design of major waste to energy projects or similar major projects
• Positive working attitude and ability to work in a fast-paced environment
• Well versed with C&S software

Job Summary:

The Process Safety Engineer is responsible for ensuring that all processes within the facility comply with safety regulations and standards. This role involves identifying, evaluating, and mitigating risks associated with hazardous processes to protect personnel, assets, and the environment. The engineer works closely with multidisciplinary teams to implement safety systems, conduct hazard analyses, and ensure compliance with industry best practices and regulatory requirements.

Key Responsibilities:

1. Process Safety Management (PSM):Develop, implement, and maintain the facility’s PSM program in line with local and international standards (e.g., OSHA PSM, API, IEC 61511).
   Perform regular audits and reviews of safety management systems.
   
2. Risk Assessment and Hazard Analysis:Conduct and facilitate risk assessments such as HAZID, HAZOP, LOPA, and SIL assessments.
   Analyze process safety incidents and near misses to identify root causes and corrective actions.
   Implement and maintain risk control measures.
   
3. Safety Design and Systems:Ensure the design and operation of safety-critical equipment meet safety requirements.
   Specify, evaluate, and test safety instrumented systems (SIS) and emergency shutdown systems (ESD).
   Provide input on process design reviews to ensure inherent safety principles are applied.
   
4. Compliance and Standards:Ensure compliance with applicable safety standards, codes, and regulations.
   Prepare and submit required safety documentation and reports to regulatory bodies.
   Liaise with government agencies, certification bodies, and auditors as needed.
   
5. Emergency Response Planning:Support the development of emergency response plans and procedures.
   Conduct process safety drills and training sessions for staff.
   
6. Training and Development:Provide training to operations and maintenance personnel on process safety concepts and best practices.
   Promote a strong safety culture within the organization.
   
7. Incident Investigation:Lead or support investigations into process-related incidents.
   Develop and implement corrective and preventive actions to mitigate future risks.
   
8. Collaboration and Communication:Work closely with operations, maintenance, engineering, and project teams to ensure process safety is integrated into all activities.
   Provide technical guidance on process safety issues.
   

Key Requirements:

Qualifications:

• Bachelor's degree in Chemical Engineering, Mechanical Engineering, or a related field.
• Advanced certifications in process safety (e.g., CCPS Process Safety Professional Certification, NEBOSH Process Safety Management) are a plus.

Experience:

• Minimum 10 years of experience in process safety engineering within the oil and gas industry, ideally with FPSO, refinery, or petrochemical exposure.
• Proven track record of implementing process safety programs and conducting risk assessments.

Technical Skills:

• Strong knowledge of process safety management frameworks and standards (e.g., OSHA PSM, API, IEC 61508/61511).
• Proficiency in process hazard analysis tools such as PHAST, PHA-Pro, or BowTie XP.
• Familiarity with safety design concepts, such as flare systems, relief valves, and blowdown systems.
• Understanding of fire and gas detection systems, ESD, and SIL verification.

Soft Skills:

• Excellent analytical and problem-solving skills.
• Strong communication and interpersonal skills for cross-functional collaboration.
• Attention to detail and ability to manage multiple priorities effectively.

Preferred:

• Experience working on offshore or FPSO projects.
• Familiarity with environmental regulations and sustainability practices in the oil and gas sector.

Job Description:

• Involve in Site Management.
• Heading a team of site supervisors and subcontractors.
• Coordinate works, liaise with clients and consultants.
• Ensure overall construction progress base on schedule.
• Enforcement of quality control and safe management control.
• Keeping site staff and subcontractors informed on approved materials & latest drawings.
• Coordination of different trades on site.

Requirements:

• Diploma or Degree in Mechanical Engineering.
• Knowledge in residential & commercial building installation works.
• Knowledge in design skills and usage of AutoCAD/ Revit will have added advantage.
• Those familiar with HDB projects will have added advantage.
• Applicants without relevant qualification must have minimum 3 years' experience in similar capacity.
• Training provided for fresh graduates with no experience.

Job Description:

• Involve in Site Management.
• Heading a team of site supervisors and subcontractors.
• Coordinate works, liaise with clients and consultants. Ensure overall construction progress base on schedule.
• Enforcement of quality control and safe management control.
• Keeping site staff and subcontractors informed on approved materials & latest drawings.
• Coordination of different trades on site.

Requirements:

• Diploma or Degree in Electrical Engineering.
• Knowledge in residential & commercial building installation works.
• Knowledge in design skills and usage of AutoCAD/ Revit will have added advantage.
• Those familiar with HDB projects will have added advantage.
• Applicants without relevant qualification must have minimum 2 years' experience in similar capacity.
• Training provided for fresh graduates with no experience.

Job Responsibilities:

1. Update CMS database checklists based on the latest engineering drawings and punch lists for mechanical/electrical processes, safety, and HVAC disciplines, and assign tasks accordingly.
2. Prepare boundary drawings to support subsystem listings.
3. Develop procedures, method statements, and risk assessments for commissioning activities.
4. Attend supplier Factory Acceptance Tests (FAT) as required.
5. Lead a team of mechanical/electrical technicians and mechanics to perform on-site preparation and execution, liaising with all parties, including supplier representatives, to resolve issues promptly.
6. Be adaptable to overseas travel and prepare the required documentation.

Candidate Requirements:

1. Relate experience in commissioning within the oil & gas or marine industry required.
2. Hands-on experience in commissioning diesel generators, compressors, pumps, piping systems, packaged equipment, cranes, mechanical handling equipment, HVAC, etc.
3. Familiar with work permit systems, lock-out tag-out (LOTO) procedures, and project specifications, technical, and HSE standards.
4. Experience with completion management system databases such as PIMS-CMS, WinPCS, ProCoSys, or ICAPS is a plus.

Benefits:

1. Annual Leave: 7 days in the first year, increases by 1 day annually, up to 14 days.
2. Medical Leave: 14 days per year.
3. Bonus: Based on performance.
4. Transportation provided (shuttle service available). Accommodation is located in Singapore.

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

1. Preparing the project reports and guidelines as per the instructions of higher authorities.
2. Assisting senior engineers in conducting research, designing systems, and analyzing data of specific projects.
3. Identify the problems of execution of project and solve them using engineering principles.
4. Maintaining equipment and inventories of the organization.
5. Collaborating with co-workers to meet the goals of projects.
6. Ensure testing and quality control processes of the products.
7. Stay familiar with the advancement in technologies to develop the highly demandable skills.
8. Following safety guidelines and engineering parameters to executive the project tasks.
9. Participating in learning and development sessions to gain expertise.

Responsibilities

• Assist Project Manager in project management, survey, managing site works, construction activities, monitor work schedules, update progress, planning and implementation in accordance to master work plan and scope of work within project budget.

• Provide guidance and supervision to contractors/ in-¬house workers in relation to Electrical/ Structured cabling works in accordance to proposal for site build for cabling infrastructure, installation quality, and adherence to site work safety requirements and to resolve technical issues.

• Prepare project submissions, tenders, system designs, installation drawing & coordination of all technical activities on assigned projects

• Participate in project meetings and resolving project issues

Requirements

• Candidates should possess at least a Nitec/Diploma in Electrical/ Engineering or its equivalent.

• At least 1-¬3 years Project Management and hands on working experience in Electrical and/or Structured Cabling.

• Able to read/write and speak English is a must.

• Able to work independently and/or work together in a team when needed.

• Able to multi¬task

• Have a strong sense of leadership, customer oriented and problem solving skills

• Proficient in Microsoft Office

About the Opportunity

The IT Engineer provides support to employees experiencing technical problems and performs troubleshooting, problem diagnosis, resolution, and escalations. In-depth knowledge and hands-on experience with system and server administration and virtualization experiences are required. Area of expertise for this position includes Microsoft technologies, VMware virtualization, Citrix VDI, Linux and storage. Prior experience supporting L1 and L2 requests in IT would be helpful for this position.

Job Responsibilities:

• Primary responsibilities will include overseeing and executing system-based projects, writing scripts to automate manual processes, and creating system documentation & diagrams. Provide system administration and configuration of specialized mission applications and software.
• Strategic Infrastructure Management: Global Administration, maintenance, and support of the Server environment and VDI infrastructure, ensuring optimal performance and scalability to meet the evolving needs of the organization as the need arise.
• Incident Resolution and Technical Escalations: Act as a point of escalation for complex technical issues, leveraging your advanced troubleshooting skills to swiftly diagnose and resolve incidents, minimizing impact on business operations.
• Advanced Problem Analysis and Resolution: Conduct in-depth analysis of system problems, particularly those related to hardware, software applications, and operating system servers, employing sophisticated diagnostic techniques to implement effective solutions.
• Comprehensive Documentation and Knowledge Management: Develop and maintain comprehensive documentation, including automation scripts and procedures, to streamline troubleshooting processes, enhance team collaboration, and ensure continuity of operations.
• Root Cause Analysis and Problem Management: Lead root cause analysis efforts for critical problems and major incidents, identifying underlying issues and implementing preventive measures to mitigate future occurrences, thereby safeguarding business continuity.
• Proactive Performance Monitoring and Security Compliance: Utilize advanced monitoring tools and command-line interface utilities to continuously assess server performance, identify potential vulnerabilities, and ensure adherence to stringent security standards.
• Change Management and Risk Mitigation: Spearhead the planning, coordinating, and executing system software upgrades, patches, and firmware updates, meticulously evaluating risks and impacts to minimize disruptions and maintain system integrity.
• Effective Communication and Stakeholder Engagement: Interface with IT management, end-users, and departmental teams to communicate feedback, share insights, and champion initiatives aimed at enhancing operational excellence and delivering exceptional service quality.
• Follows SOP: Support procedures and provides troubleshooting guideline and cause analysis for technical issues

Job Requirements

• BS degree or equivalent experience.
• 8 + years of advanced experience as a IT Administrator or Engineer with hands on experience in servers, virtualization and storage.
• Active Directory (AD) & Domain Controller Administration including DNS and GPO management in a multi-site environment.
• Building and administering Windows\Linux servers and accompanying infrastructure, maintaining capacity and performance in enterprise environment.
• Candidates must possess experience with both Windows and Linux mixed environments.
• Experience with Infrastructure – virtual environment, VDi, Citrix Netscalar, Backup& Restore, disaster recovery and business continuity
• Hardware: Dell MX7000 Chassis and MX700 series blade configuration, PowerEdge rack servers
• Storage: NFS and ISCSI storage concepts. Cronjobs and rSync functionality
• Networking: TCP/IP, VLAN, DNS, Load Balancing and security concepts
• Virtualization: VMware 7 and above and Citrix Storefront
• Transferable Skills: Communication, ability to work with a diversity of people, ability to plan and organize, time management, analytical problem solving, Project Management, & customer service skills.
• Strong communication and collaboration skills
• Ability to work independently and as part of a team.
• Willingness to learn and adapt to new technologies and processes.
• Ability to multi-task in a fast-paced IT environment with fluctuating priorities and deadlines.
• Ability to interface and work with varied positions and levels of technical knowledge both within the department and with other departments in the company.

When you’re part of the team at Thermo Fisher Scientific, you’ll do important work. And you’ll have the opportunity for continual growth and learning in a culture that empowers your development. With revenues of more than $40 billion and the largest investment in R&D in the industry, we give our people the resources and opportunities to make significant contributions to the world.

Job Descriptions

• Assist Mass Spectrometry manufacturing by resolving technical issues.
• Mechanical, precision, or manufacturing engineering competence.
• Design tools and fixtures for process improvement.
• Maintain engineering support for Mass Spectrometry production.
• Assist the production and quality teams to improve First-Pass yield.
• Assist with engineering evaluation for component EOL and part change.
  Assistance with NPI manufacturing setup and product transfer initiatives
• Assist the quality team with field return instrument failure analysis.

Requirements

• Bachelor's Degree in Mechanical Engineering with minimum 5 years working experience, preferably in life science or biotech manufacturing environment.
• Work well within a team environment.
• Able to communicate with all levels, across functions and cross cultural.
• Strong analytical and leadership skill.

Benefits

We offer competitive remuneration, annual incentive plan bonus, healthcare, and a range of employee benefits. Thermo Fisher Scientific offers employment with an innovative, forward-thinking organization, and outstanding career and development prospects. We offer an exciting company culture that stands for integrity, intensity, involvement, and innovation!

Our Mission is to enable our customers to make the world healthier, cleaner and safer. Watch as our colleagues explain 5 reasons to work with us. As one team of 100,000+ colleagues, we share a common set of values - Integrity, Intensity, Innovation and Involvement - working together to accelerate research, solve complex scientific challenges, drive technological innovation and support patients in need. #StartYourStory at Thermo Fisher Scientific, where diverse experiences, backgrounds and perspectives are valued.

Benefits
We offer competitive remuneration, annual incentive plan bonuses, healthcare, and a range of employee benefits. Thermo Fisher Scientific
offers employment with an innovative, forward-thinking organization and outstanding career and development prospects. We offer an exciting
company culture that stands for integrity, intensity, involvement, and innovation!
Our Mission is to enable our customers to make the world healthier, cleaner and safer. Watch as our colleagues explain 5 reasons to work with us.

As one team of 100,000+ colleagues, we share a common set of values - Integrity, Intensity, Innovation and Involvement - working
together to accelerate research, solve complex scientific challenges, drive technological innovation and support patients in need.
#StartYourStory at Thermo Fisher Scientific, where diverse experiences, backgrounds and perspectives are valued.
Apply today! http://jobs.thermofisher.com

With the business expansion, we're looking to hire a Singapore based Technical Sales Engineer to look after key accounts.

For this role, you will need to

• Build and maintain rapport with existing and potential clients, partners and other stakeholders.
• General sales leads and lead technical and commercial discussion.
• Attend regional marketing event/networking session.
• Gather and analyse on customers/competitors' activities/products/industry developments and compile market intelligence reports, work closely with product development team to fulfill client's requirement.
• Deliver product presentations to current and potential clients.

Job requirement

• Degree/Diploma in any field (engineering related major is preferred).
• At least 2 years of sales experience within engineering space, candidates with technical background are welcome to apply.
• Team player and independent, good communication skills.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a E&I Engineer to join us on a contract role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Ensure that calibration and preventive maintenance (PM) programs are established for new instruments/equipment in the Manufacturing Unit, Laboratories, Utilities, and General Areas within COMOS, CMX, and SAP-PM by coordinating necessary information.

· Verify that vendor-executed instrument commissioning and calibration for Electrical and Instrumentation (E&I) meet site requirements.

· Update instrument data in COMOS, SAP-PM, and CMX as needed.

· Ensure successful execution of instrument calibrations and the issuance of calibration certificates in CMX, according to the project schedule.

· Provide timely and relevant input to the project team from pre-commissioning through to the end of validation.

· Participate in Electrical and Instrumentation-related troubleshooting, deviations, and root cause investigations.

· Ensure that all Electrical and Instrumentation activities comply with site-specific Work Instructions (WI) and Standard Operating Procedures (SOPs).

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Job Description

• Prepare project management plan and its sub-plans, such as: work scope statement,
schedule plan, manpower plan, tools and equipment plan, procurement plan
• Provide engineering support in project or plant maintenance
• Coordinate internal and external audit review
• Engineering calculations associated with current carrying capacity of cables, wires,
fuses and other circuit protective devices.
• Procedures for inspection, testing and certification of electrical fixed installations.
• Industrial hazards, safety and health precautions, and environmental concerns.
• Installation practice and regulations, and relevant codes of practice.

Job Description

A Testing & Commissioning Engineer is responsible for ensuring that electrical systems and equipment are installed, tested, and commissioned according to industry standards and project specifications. The primary duties include:

• Testing and Commissioning: Conducting tests on electrical power equipment such as transformers, switchgear, circuit breakers, and protection systems to ensure they operate correctly.
• Troubleshooting: Identifying and resolving issues that arise during the testing and commissioning phases.
• Documentation: Preparing detailed reports on test results, commissioning activities, and any issues encountered.
• Compliance: Ensuring all activities comply with relevant safety standards and regulations.
• Coordination: Working closely with project managers, engineers, and other stakeholders to ensure smooth project execution.
• Training: Providing training and technical support to other team members and clients on the operation and maintenance of electrical systems.
• Continuous Improvement: Participating in continuous improvement initiatives to enhance testing and commissioning processes.

Qualifications

To be successful in this role, candidates need the following qualifications:

• Educational Background: A Bachelor's degree in Electrical Engineering or a related field.
• Experience: Proven experience in testing and commissioning electrical power equipment. At least 3-5 years of relevant experience is required.
• Technical Skills: Proficiency in using testing equipment and software, knowledge of electrical power systems, and familiarity with industry standards and regulations.
• Certifications: Relevant certifications such as Professional Engineer (PE), Certified Electrical Inspector (CEI), or other industry-specific certifications can be beneficial.
• Soft Skills: Strong analytical and problem-solving skills, excellent attention to detail, effective communication skills, and the ability to work collaboratively within a team.
• Additional Skills: Experience with specific testing equipment brands (e.g., Omicron) and knowledge of safety protocols and procedures.

Job Description:

• Involve in Site Management.
• Heading a team of site supervisors and subcontractors.
• Coordinate works, liaise with clients and consultants. Ensure overall construction progress base on schedule.
• Enforcement of quality control and safe management control.
• Keeping site staff and subcontractors informed on approved materials & latest drawings.
• Coordination of different trades on site.

Requirements:

• Diploma or Degree in Mechanical Engineering.
• Knowledge in residential & commercial building installation works.
• Knowledge in design skills and usage of AutoCAD/ Revit will have added advantage.
• Those familiar with HDB projects will have added advantage.
• Applicants without relevant qualification must have minimum 3 years' experience in similar capacity.
• Training provided for fresh graduates with no experience.

• Marine Electrical Equipment (MNC company)
• Basic $3000 - $4000
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspection & Quality Control: Perform incoming and outgoing inspections according to established procedures, including factory routine tests and official tests for switchboards. Ensure that non-conforming products are separated and rejected as necessary.
• Quality Documentation: Maintain quality records and file data. Highlight quality issues to the appropriate management for action.
• Authorization & Release: Authorize the rejection of unsatisfactory parts and the release of conforming parts for storage and customer delivery.
• Customer Satisfaction & Warranty: Ensure the successful testing and commissioning of switchboards on-site or on vessels, and address warranty claims or customer quality complaints.
• Problem Prevention & Solutions: Initiate actions to prevent non-conformities, recommend solutions, and verify their implementation.
• Safety, Calibration & Housekeeping: Follow safety rules, use calibrated instruments for inspections, maintain good housekeeping in the QA department, and assist the manager in meeting quality objectives.

Qualifications

• Min ITE/ Diploma in Electrical Engineering
• At least 2 years of QA experience

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

Description:

• Understand read of 3D drawing of equipment, piping system and pipe support
• Familiar with equipment layout drawing, detailed piping drawing and isometric drawing.
• Co-ordinate with process, civil & structural, electrical & instrumentation team, to understand the elevation & structural requirements.
• Develop MSRA for mechanical, piping construction works.
• Manage and supervisor workforce for construction works.
• Prepare the material list depicting all the materials, sizes, specification, special requirements, testing requirements to meet the design. This document shall be used as an input for procurement team.
• Review the documents & drawings of vendor supplied equipment, valves, and skids to verify the piping requirements are meet.
• Perform site inspection at vendor manufacturing unit to qualify & check vendor can supply the bulk requirement on demand.
• Assist project & engineering team for modification requirement during construction. Prepare as-built drawings after completion of construction and documents, as necessary.

Requirements:

• Degree in Mechanical Engineering,
• Minimum 3 year’s relevant experience in piping construction and developing process piping system.
• Good knowledge of GA drawings, ISO drawings,
• Knowledge & experience to work in oil & gas plant, chemical plant,
• Able to provide quick and effective technical solutions, to suit requirements at all stage of the project

RESPONSIBILITIES:

• Strong knowledge of cryptographic concepts, Hardware Security Module's, and key management.
• Hands-on experience in implementing and operating Thales SafeNet HSMs.
• Hands-on experience in designing and implementing key management solutions for enterprises.
• Knowledge of networking and network security concepts.
• Experience working on PKI / key management solutions.
• Programming knowledge in C / C++ (preferred), Java, .NET.
• Experience integrating cryptographic libraries and HSMs with applications.
• Understanding of Information Security Architecture and ecosystem technologies and concepts required like firewalls, monitoring tools, encryption, web proxies, and identity & access management.

REQUIREMENTS:

• Bachelor's degree in Computer Science, Cybersecurity, or a related field.
• Experience with Thales HSM or similar cryptographic solutions.
• Strong understanding of cryptographic algorithms and protocols.
• Familiarity with compliance standards (e.g., PCI-DSS, GDPR).
• Excellent problem-solving skills and attention to detail.

RESPONSIBILITIES:

• Post-sales activities of Cybersecurity or Network Performance Monitoring products
• Involve in Large-scale (Local & Regional) Project Implementation
• Provide on-site implementation services including testing, deployment & documentation
• Provide technical support in ensuring customer satisfaction
• Analyse and clarify customer queries though troubleshooting and researching existing
  knowledgebase articles/known issues
• Be on routine standby to support 24x7 maintenance support calls
• Requires the ability to communicate issues clearly and concisely

REQUIREMENTS:

• Bachelor's degree or Diploma in Cyber Security, Computer Science, Computer Engineering or related field
• At least 1-2 years relevant experience in IT industry providing network support and
  administration.
• Equip with knowledge & experience in networking such as routing and switching technology.
• Possess CCNA or CCSA certification.
• Able to work independently as well as in a team environment.
• Willing to work hard and eager to learn about new technologies.
• Polite and able to communicate well to the clients.
• Analytical and possess good troubleshooting skills.
• Willing to work extended hours and on standby duty.
• Excellent interpersonal and communication skills.
• Independent and motivated.

Job Description

A System Assurance Engineer is responsible for identifying, evaluating, and mitigating risks associated with systems and processes within an organization. The primary duties include:

• Conducting Risk Assessments• : Evaluating potential hazards and vulnerabilities in systems and processes.

• Developing Mitigation Plans• : Designing and implementing strategies to minimize identified risks.

• Compliance Monitoring• : Ensuring that systems and processes comply with relevant safety and regulatory standards.

• Documentation• : Creating and maintaining detailed reports on risk assessments, mitigation strategies, and compliance status.

• Collaboration• : Working with various departments to develop and maintain safety standards and protocols.

• Training• : Providing training to staff on risk management practices and procedures.

• Continuous Improvement• : Participating in continuous improvement initiatives to enhance system reliability and safety.

Qualifications

To be successful in this role, candidates need the following qualifications:

• Educational Background & Experience• : Diploma or Degree in SA engineering with minimum 5 years’ proven work experience in risk assessment, system assurance, or a related field.

• Technical Skills• : Proficiency in risk assessment tools and methodologies, knowledge of safety regulations, and experience with compliance standards.

• Certifications• : Relevant certifications such as Certified Information Systems Security Professional (CISSP), Certified Information Security Manager (CISM), or Project Management Professional (PMP) can be beneficial.

• Soft Skills• : Strong analytical and problem-solving skills, excellent attention to detail, effective communication skills, and the ability to work collaboratively within a team.

• Additional Skills• : Additional experience in risk assessment and/or ISO 9001 will be a plus.

Mandatory Skills

Reports To

Project Manager

Job Overview

• To work with Application and Infrastructure Teams to Setup & Configure Infrastructure, Application in OCP

Responsibilities and Duties

• To coordinate in setting up Infrastructure and support Application Infra needs
• To work with Application team to Setup, Migrate, Test Applications from VMs to OCP

Qualifications

• Well versed and Experienced in Redhat Openshift (OCP) Development & Architecture
• Knowledge in Linux OS & MariaDB
• Experience in JAVA Development, Shell Scripting, DevOps
• 5 Years minimum professional experience and 3 Years minimum relevant experience
• Willing to work in shifts and in weekends
• Team player to work with multiple teams and teammates
• Ability to work independently and handle multiple concurrent initiatives
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills
• Ability to meet deadlines with no compromise on the quality of the work product.