For over 50 years, SCIEX has been developing groundbreaking technologies and solutions in mass spectrometry and capillary electrophoresis. Our products enable our customers to quickly respond to environmental hazards, better understand biomarkers relevant to disease, improve patient care in the clinic, bring relevant drugs to market faster and keep food healthier and safer. At SCIEX, you’ll find a rewarding role that amplifies your impact on the world and helps you realize life’s potential.

SCIEX is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

Learn about the Danaher Business System which makes everything possible.

Are you looking to use your knowledge and experience to empower our customers to solve the most impactful analytical challenges in quantitation and characterization?

The Manufacturing Test Engineer is responsible for setting up an efficient manufacturing test process by developing procedures (automated testing) to test mass spectrometer instruments and improving First Pass Yield continuously to meet the organization objectives. You will gain new product knowledge of mass spectrometer in theory and practical as well as enhancing your technical competency in engineering fields.

This position is part of the Manufacturing Engineering Department and will be located in Marsiling Industrial Estate, Singapore.

In this role, you will have the opportunity to:

• Develop the commissioning and final tests procedures (automated testing) to meet system requirements.
• Improve and modify manufacturing test software.
• Apply Problem Solving Process to define problem statements, investigate to root causes, verify countermeasures and ensure sustainment.
• Improve the First Pass Yield and parts DPPM failures in Manufacturing.
• Assist instrument installation escalation calls in the field through site visit/remote access if required.
• Expand PCBA troubleshooting skills to detect defective Electrical/Electronics components.
• Perform First Article Evaluation of Electrical/Electronic parts and software.

The essential requirements of the job include:

• Degree in Electrical and Electronics Engineering.
• 1-2 years of experience working in ISO 13485 manufacturing environment. Fresh graduates are encouraged to apply.
• Hands on experience in using measuring equipment like digital multimeter, oscilloscope, function generators, etc. during his/her university studies.
• Understand PCBA manufacturing process, able to read the PCBA schematic diagram and perform troubleshooting.
• Good knowledge in analog and digital electronics is desired.

Travel, Motor Vehicle Record & Physical/Environment Requirements:

• Ability to travel to North America for 1-2 months during project.
• Ability to lift, move or carry equipment up to 10kg daily.

It would be a plus if you also possess previous experience in:

• IPC-610 on Printed Circuit Board Assemble manufacturing process
• Operation and Application on mass spectrometer instruments

SCIEX, a Danaher company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at danaherbenefitsinfo.com.

N/A

At Danaher we bring together science, technology and operational capabilities to accelerate the real-life impact of tomorrow’s science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life. Our global teams are pioneering what’s next across Life Sciences, Diagnostics, Biotechnology and beyond. For more information, visit www.danaher.com.

At Danaher, we value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes.

Job Responsibilities:

• To develop E&I shop drawings based on client given information, specifications, calculations
• Able to make revisions and incorporate comments made by clients
• Make the drawings in keeping with Company standards
• To provide MTO based on drawing details
• Required to maintain all drawing files, update drawings as needed, and make corrections to drawings as directed by the Section Head/Leads
• Explain drawings to production or construction teams and provide adjustments as necessary
• Must be able to work in an environment with schedules and priorities
• Hands on knowledge on Auto-cad is essential

Job Requirements:

• Diploma/Bachelor Degree in Electrical Engineering or equivalent
• Hands on AutoCAD knowledge
• Able to work in an environment with tight schedules and priorities

Job Description:

• Develop system safety program plan, hazard analyses and risk assessment documents, safety assessment report and hazard logs based on contracted system safety and project requirements
• Facilitate system safety reviews and assessment with project system safety working groups and to facilitate and seek technical endorsement for safety assessment report with company and customer safety review boards
• Ensure system safety requirements and implementation are complied with company process and contracted requirements for projects and in-house products
• Submit monthly project status report and updates to Project Manager, System Safety Leads and Department Manager
• Support safety related administrative functions
• Conduct failure investigation and prepares reports for problems or issues based on findings from facts, research, studies and makes necessary recommendations and submits to relevant authority for approval
• Prepare and studies technical drawings, specifications of mechanical systems inclusive of engine, transmission, powerpack and driveline, and scopes of work to ensure (Maintenance, Repair and Overhaul) MRO operations conform to standards and customer requirements
• Document work procedures based on technical requirements for the MRO components
• Analyse and interpret test information to resolve repaired related problems
• Design, maintain, service and implement components so to be able to integrate into in-service systems, and interpret specifications and mechanical drawings for any re-engineering work required
• Responsible include training technicians; planning, assigning, and directing work to a group of technicians; appraising addressing complaints and resolving problems
• Appoint to be lead for a Platform to ensure the MRO Component serviceability is met at all times
• Perform literature searches on the subject area for MRO in Mechanical System especially in engine and transmission
• Assist in providing technology solutions to overcome more complex MRO systems so to allow work focuses upon the effective integration of people, processes, tools and technology in order to improve the MRO into the next level

Job Requirements:

• Degree/ Diploma in Mechanical Engineering with 2 year of working experience related to Automotive fields or MRO Services
• Certified Reliability Engineer will be an added advantage
• Able to read and understand mechanical drawings
• Possess good interpersonal skills and strong ability to work within a team
• Good interpersonal & communication skills
• Ability to present ideas, approach and objectives clearly
• Work under pressure, independent and self-motivated
• Good listener, and able to understand customers problem or question and help them solve it
• Customer orientated
• Good analytical and problem solving skills
• Good communication skills and a strong team player
• Independent, highly motivated, meticulous, resourceful and possess a positive attitude

Key Roles and Responsibilities:

Marine Vessel Maintenance & Repair

• Perform regular inspections, maintenance, and repair work on marine vessels, including engines, propulsion systems, electrical systems, and HVAC systems.
• Troubleshoot and diagnose issues with marine equipment, machinery, and systems.
• Carry out emergency repairs and provide solutions to minimize downtime and ensure the continued safety of operations

Technical Support & Problem-Solving

• Provide technical support for complex repairs, ensuring compliance with safety and environmental regulations.
• Work closely with ship crews and offshore teams to address immediate and long-term repair needs.
• Develop and implement corrective actions to improve vessel performance and reduce operational risks.

Documentation & Reporting

• Maintain accurate records of all maintenance and repair activities, includingreports on inspections, repairs, parts used, and time spent.
• Ensure all repair work complies with regulatory and industry standards and is appropriately documented for audit purposes.
• Prepare maintenance schedules and provide recommendations for necessary upgradesor replacements.

Quality Control & Safety Compliance

• Monitor the quality of repair work and ensure all maintenance activities are carried out to the highest standards.
• Ensure compliance with maritime safety and environmental regulations, including adherence to SOLAS (Safety of Life at Sea) and MARPOL (Marine Pollution) requirements.
• Conduct safety checks and recommend improvements to prevent future damage or failure.

Collaboration with Other Departments

• Work closely with the project management, procurement, and logistics teams to ensure timely delivery of parts and services required for repairs.
• Collaborate with vendors, suppliers, and manufacturers for technical support and part procurement.

Training & Development

• Provide technical guidance and training to junior engineers, technicians, and crew members on vessel repairs and maintenance.
• Stay updated with the latest developments in marine engineering technology, repair techniques, and industry standards.

Qualifications & Requirements:

• Bachelor's degree or diploma in Marine Engineering, Mechanical Engineering, or a related field.
• Minimum of 3-5 years of experience in marine repair, maintenance, and troubleshooting of marine vessels.
• In-depth knowledge of marine systems such as propulsion, electrical, mechanical, and safety equipment.
• Stron understanding of maritime safety regulations and industry standards.
• Ability to read and interpret technical drawings and manuals.
• Strong problem-solving and troubleshooting skills.
• Good communication skills and the ability to work in a team environment.
• Must be willing to work offshore or in dry docks if required.
• Certification in marine safety and repair procedures (e.g., STCW, Basic Safety Training) is a plus.

Benefits:

• Competitive salary and benefits package
• Opportunities for career advancement and professional development
• A dynamic and supportive work environment

If you are passionate about marine engineering and have the skills to ensure the safe and efficient operation of marine vessels, we would love to hear from you. Apply today!

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

COMPANY DESCRIPTION

1-Net manages carrier-neutral Internet Data Centers, along with providing a comprehensive range of integrated services including network connectivity, managed services, work area recovery suite, cloud and media delivery services. 1-Net's Data Center Corridor initiative currently interconnects key data centers in Singapore to facilities quick deployment and providing a diverse connectivity options for enterprises and service providers.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

1-Net is fast transforming itself into Asia's Data Centre of Choice. As one of the pioneers in broadband development in Singapore, 1-Net currently manages telco-class carrier-neutral Internet Data Centres, along with providing domestic and international connectivity, managed services and media delivery services. 1-Net offers superior stability, secure delivery and service experience through its services. It's uniquely positioned in Southeast Asia, with a comprehensive range of integrated services and a media-centric approach to bring cutting edge solutions to its customers.

Responsibilities

• Manage the maintenance and daily operations of the DC facilities with the objective of achieving uninterrupted availability at all times and to ensure the fulfillment of our service commitment to customers.
• Support service delivery to ensure contracted service level agreements and key performance indicators are met or exceeded.
• Perform routine facilities activities including inventory control. Critical systems checks and functional testing. Able to respond and take action in response to facilities crisis management activities including: power outages, fire alarms, HVAC outages. Analyze data and identify trends with facility issues to determine root cause and take appropriate action.
• Respond to BMS/EMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Provide technical support to all aspects of data center operations including the operation, maintenance and repair of all mission critical equipment and systems supporting a 24x7 data center operation to achieve 100% uptime and 100% compliance with all customer SLAs.
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards. Witness testing of all equipment during commissioning and validate sequence of operations and receipt of all operational documentation.
• Support for customer installations, in coordination with the design & construction as well as operations requirements to coordinate customer move-in and turn-on, and other service request & deliveries.
• Maintain compliance with local workplace safety & health (WHS) standards and local electrical and building codes.
• Ensure adherence to all standard operating procedures (SOP), method of procedures (MOP), and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process.
• Participate in the scheduling, coordination and completion all significant planned and emergency maintenance events for the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems.
• Support various accreditation, certification and compliance initiatives such as BCA-IDA Green Mark DC/QMS/ISMS/BCMS/PCIDSS/OSPAR, etc as may be required.

• ITE/Diploma in Electrical or Mechanical engineering or equivalent qualification
• No experience required as training will be provided
• Must be willing to learn
• Able to resonate with our culture of Respect, Teamwork, Drive
• 24x7 rotating shift duty
• Able to comprehend, analyse and interpret complex project documents, including AutoCAD, Visio and PDF documents
• General technical and functional knowledge of data center infrastructure to include electrical and mechanical systems, fire detection and protection systems, building management systems, equipment maintenance, space planning, construction of critical facilities environment
• Working location: 1-Net (East) at Chai Chee / 1-Net (North) Woodlands

Job Description & Requirements

You will be part of an innovative and passionate team, working towards the one ultimate goal of producing high quality software. Your primary duties are design, prepare technical specifications, lead a team of developers, programming, unit-testing, and analytical problem-solving; but may include support for products implementation, integration testing and documentation.

The individual will:

• Responsible for the successful enhancement of software products and solutions by co-operating with other teams to ensure releases that are coordinated in terms of both time and technology.
• Design system architecture; translate user's requirements into functional and technical specifications.
• Participate and manage testing, debugging, verifying design and conduct reviews.· Participate and manage data and solution migration.
• Assist pre-sale in architect technical solution.
• To perform other duties as and when required.

Skills Requirements

• Degree in Computer Science or Information Technology or equivalent.
• In-depth experience in Java
• Working knowledge of Object-Oriented
• Working knowledge on any web framework, with understand MVC concept on the web-based application
• Working knowledge on conceptualizing and designing web-based application
• Preferable knowledge and experience in Spring and Hibernate Framework, Spring Boot, REST, Drools, HTML5, Oracle.
• Possess a passion in software engineering/development, with drives to be an effective team leader
• Ability to communicate effectively and clearly
• He or she should show self-initiative in learning, and self-development
• Ability to work under pressure to deliver projects within the designated deadlines.
• At least 2 to 5 years of relevant experience

#TeSA #TMCA

• Provide advanced manufacturing electrical and controls expertise in leading detailed and comprehensive planning for conceptualization, specification, development and implementation of right-sized manufacturing and facility equipment.
• Manage electrical and control portions of capital equipment expenditures that support new product designs, factory capacity or efficiency additions.
• Manage multiple projects and/or provide leadership for larger equipment control projects.
• Must be able to analyse needs and determine best electrical & instrumentations recommendations for equipment / process to optimize cost & performance.
• Able to select the right-sized equipment, workstation design, material presentation, standard work and single piece flow. Use data and statistics to characterize delivered manufacturing process capabilities in qualifying the release of processes and equipment
• Able to design panel (HMI, PLC, RIO) and provide line drawing according to client needs.
• Able to perform IQ/OQ test during commissioning.
• Able to perform costing base on selected instrument or given drawing.
• Automation knowledge.
• Identify and resolve operational problems and minimise delays.
• Select, guide and develop a team of project member with operational responsibilities to ensure that the organisation achieves it business objectives and complies with all relevant regulations and laws.
• Ensure that organisation and government standards on safety are met.
• Ensure that customer quality specifications are constantly met.
• Allocate capital and human resources to maximise productivity.
• Supervise and implement project expense, other assets and resource within budget.
• Provide guidance to junior and perform any tasks or duties as assigned by Management.
• You will oversee the safety and job/project operation.
• Ensure job completed and hand over on schedule.
• You will be attending safety or projects meeting.

Mechanical Contractor - Construction

• Basic: $4000 - $5000
• Variable Bonus
• 5 days (Office Hours)
• Location: Pioneer

Responsibilities:

• Work with Process team on in-process audit and FQC Audit.
• Work with Process Engineer & Engineering team on QC requirements
• Contriol of Supplier QUality Assurance (SQA).
• Quality Control of in-coming, in-process and out-going products.
• Prepare and compile report after inspection.
• Plan on construction site visit and liaise with Project Managers or Engineers.

Requirements:

• Min. IT in Manufacturing or Quality Engineering with 1 year of relevant experience.
• Knowledge of IS0 9001, 14001, 13485 & 45001
• Ability to understand DfMA modular prefab requirements, including materials selection and fabrication.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

1.Min. 10 years experience in engineering, maintenance and project execution in controls, electrical and instrumentation in Oil & Gas and Petrochemical Industries.Knowledgeable in DCS, SCADA, IPS, PLC, Interlock Logic Diagrams, Instrumentation Loop Drawings, Electrical Drawings, P&IDs.Competent in handling Honeywell (EPKS) Experion PKS (including back-up restore, HMI Web Builder, PAS Plant State Suite Alarm Management System, Corworx Software and Maximo/SAP.

Deliver all assigned C&N activities in a cost-effective, safe and efficient manner through contractors with minimum interruption to operating plant and ensure field work sequences are aligned,

Lead contractors in field activities with high safety standards; ensure all field activities comply with authorities, industrial and company HSE standards and requirements.

Organize and chair risk assessments discussions to ensure hazard are identified and mitigated for all C&N assigned activities.

Collaborate with stakeholders, coordinates reviews and schedule optimizations, resource leveling etc. and prompt updates to the C&N Work Plan.

Provide conceptual ideas for field route piping and produce quality sketches, Check accuracy of approved construction drawing and documentation for execution. Carry out mechanical line and equipment checks, able to coordinate Civil and E&I activities progress, Support Construability reviews for Projects.

Conduct site inspection and explain work requirements to contractors; develop work plan with contractors, operations, maintenance, and other stakeholders for execution with minimum interruption to operating plant and ensure field work sequences are aligned. Able to coordinate with multi-disciplines during field execution.

Drive Contractors management to deliver contractors productivity improvements, contractors’ competency & assurance, including developing relevant work procedures and QA/QC. Accept or reject the quality of work & goods provided by contractors/vendors.

Establish time schedule/execution plan for more complex project with multi-disciplinary involvement amongst operations, maintenance, and contractors. Approval of construction related method statements.

Prepare and deliver weekly works & field progress report. Support computation and calculation of progress measurement, monitor work progress and able to provide schedule catch-up plan. Validate field work quotations and value of work done (VOWD)

Executes the Quality Assurance and Control Plan and Project Specifications. Reviews and approves Inspection Test Plan (ITP) according to Shell HSSE, Technical, and Process Safety Standards, and relevant industry code.

Perform as Permit Requestor (PR) and Authorized Engineer (AE), including for lifting works, as per SJI Permit to Work (PTW) requirement

Organize Mechanical Completion review and assist in operation readiness review for project handing over.

Carry out any other related duties as required, including temporary assignments in other sections within the MTAC department on site.

Educational Qualifications:

· Diploma/ Degree in Mechanical Engineering

Technical Qualifications:

· NACE Coating Inspector Level 2 (Validity Required)

· Qualified MOM OPSOC (Supervisor) or equivalent

· Qualified MOM CSOC (Supervisor) or equivalent

· Qualified MOM Manhole Supervisor

· Qualified MOM Confined Space Safety Assessor

· Qualified MOM Lifting Supervisor and Rigger/Signalman

· Qualified Work at Height Assessor

Professional Experience:

· Minimum 10 years of relevant experience in oil & gas, chemical & petrochemical industry in the below fields.

o Piping/Pipeline Construction, inspection and maintenance

o Tank maintenance

o Application of Protective Coatings (Organic Coatings, Thermal Spray Aluminum)

o Installation and maintenance of Insulation systems.

· Experience in Plant Turnaround Project planning, preparation and execution

· Experience with catalyst change out is a bonus.

Job Description & Requirements

• Responsible to the Principal Engineer, Piping for the preparation of design as per codes / standards and client’s specifications, requisitions for materials, equipment, valves, etc., and for the timely completion of each planned engineering activity assigned to him / her.
• Review of piping specification.
• Review piping stress analysis calculation.
• Review and finalize of piping routing, piping arrangement and support.
• Review design data for missing and / or ambiguities information.
• Reporting project progress to Principal Engineer, Piping on a weekly basis.
• Implementation of Engineering Procedure, drafting Standards and Quality Management.
• Preparation of proposals / estimations for equipment and tankage works.
• Review engineering calculation and technical specifications of storage tanks, pressure vessels and various mechanical equipment.
• Evaluate vendor’s bids and highlight deviations and omissions to purchasing for further clarifications with vendor.
• Perform any other responsibilities as directed by immediate supervisor.

Qualification & Experience generally required

• Bachelor Degree in Engineering.
• Min 8 years relevant working experience in Mechanical engineering in oil and gas sector or offshore sector.
• Know to use spring hanger in stress analysis.
• Proficient in Microsoft Office products, AutoCAD and Caesar ll Stress Analysis Software.
• Prefer to have at least 5 year of piping engineering related working experience.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Job Responsibilities:

• Oversee C&S design progress against schedule and budget on projects.
• Manage the interfacing with M&E contractors
• Coordinate with engineering consultant, review and comment its design drawings
• Monitor the design progress and statutory submission against project baseline program
• Implement corrective measures for identified distractions or issues.
• Review, negotiate and recommend for approval/disapproval on design change orders.
• Administer design subcontract including processing monthly invoices for payment.
• Coordinate and monitor status of design incentive/disincentive programs complying with provisions of design subcontract.
• Perform constructive reviews conforming design to prime contract requirements and proposal commitments.
• Coordinate and control design submittals for owner’s review and approval.
• Lead a design team for overall C&S and architectural design works, assist QS team for material takeoff and tendering, manage subcontractors and support site construction works
• Facilitate resolving design issues with owner.

Job Requirements:

• Degree qualifications in Civil and Structural Engineering
• Preferably 2 years of relevant expereince in the planning and design of major waste to energy projects or similar major projects
• Positive working attitude and ability to work in a fast-paced environment
• Well versed with C&S software

Job Summary:

The Process Safety Engineer is responsible for ensuring that all processes within the facility comply with safety regulations and standards. This role involves identifying, evaluating, and mitigating risks associated with hazardous processes to protect personnel, assets, and the environment. The engineer works closely with multidisciplinary teams to implement safety systems, conduct hazard analyses, and ensure compliance with industry best practices and regulatory requirements.

Key Responsibilities:

1. Process Safety Management (PSM):Develop, implement, and maintain the facility’s PSM program in line with local and international standards (e.g., OSHA PSM, API, IEC 61511).
   Perform regular audits and reviews of safety management systems.
   
2. Risk Assessment and Hazard Analysis:Conduct and facilitate risk assessments such as HAZID, HAZOP, LOPA, and SIL assessments.
   Analyze process safety incidents and near misses to identify root causes and corrective actions.
   Implement and maintain risk control measures.
   
3. Safety Design and Systems:Ensure the design and operation of safety-critical equipment meet safety requirements.
   Specify, evaluate, and test safety instrumented systems (SIS) and emergency shutdown systems (ESD).
   Provide input on process design reviews to ensure inherent safety principles are applied.
   
4. Compliance and Standards:Ensure compliance with applicable safety standards, codes, and regulations.
   Prepare and submit required safety documentation and reports to regulatory bodies.
   Liaise with government agencies, certification bodies, and auditors as needed.
   
5. Emergency Response Planning:Support the development of emergency response plans and procedures.
   Conduct process safety drills and training sessions for staff.
   
6. Training and Development:Provide training to operations and maintenance personnel on process safety concepts and best practices.
   Promote a strong safety culture within the organization.
   
7. Incident Investigation:Lead or support investigations into process-related incidents.
   Develop and implement corrective and preventive actions to mitigate future risks.
   
8. Collaboration and Communication:Work closely with operations, maintenance, engineering, and project teams to ensure process safety is integrated into all activities.
   Provide technical guidance on process safety issues.
   

Key Requirements:

Qualifications:

• Bachelor's degree in Chemical Engineering, Mechanical Engineering, or a related field.
• Advanced certifications in process safety (e.g., CCPS Process Safety Professional Certification, NEBOSH Process Safety Management) are a plus.

Experience:

• Minimum 10 years of experience in process safety engineering within the oil and gas industry, ideally with FPSO, refinery, or petrochemical exposure.
• Proven track record of implementing process safety programs and conducting risk assessments.

Technical Skills:

• Strong knowledge of process safety management frameworks and standards (e.g., OSHA PSM, API, IEC 61508/61511).
• Proficiency in process hazard analysis tools such as PHAST, PHA-Pro, or BowTie XP.
• Familiarity with safety design concepts, such as flare systems, relief valves, and blowdown systems.
• Understanding of fire and gas detection systems, ESD, and SIL verification.

Soft Skills:

• Excellent analytical and problem-solving skills.
• Strong communication and interpersonal skills for cross-functional collaboration.
• Attention to detail and ability to manage multiple priorities effectively.

Preferred:

• Experience working on offshore or FPSO projects.
• Familiarity with environmental regulations and sustainability practices in the oil and gas sector.

As a Sales Engineer / Senior Sales Engineer, you will join our dynamic sales force in developing new businesses and providing professional solutions to our potential clients. Identify new sales opportunities through prospecting.

Job Description:

• Originate and close opportunities to develop new market segments, product groups and channels.
• Identify and canvass new sales opportunities and market through prospecting.
• Develop and plan sales strategies to meet monthly sales targets and progressive KPIs.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Work closely with Sales Manager and Director to develop and implement sales and service strategies to achieve committed sales target.
• Work closely within Sales Department to manage and expand existing business and contribute to meet sales KPI.
• Travelling to be expected.

Requirements:

• Diploma or Degree in Engineering, preferably in Marine, Mechanical or Mechatronics field.
• Have a strong and successful sales experience for more than 2 years in marine or oil and gas industry.
• Positive working attitude and self-motivated.
• Preferred who are familiar with valves and pumps or piping solution.

Build a career with confidence.

Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the center of everything we do.

About the role

This position is for a Refrigeration Airconditioning Lab Engineer, performing Engineering lab day to day operation. To work on continuous improvement on Engineering lab procedures and maintain a high level lab safety standard.

Key Responsibilities:

As a Refrigeration Airconditioning Lab Engineer, you’ll be responsible for:

• Prepare and conduct product audit tests on time, consolidate test data and generate test report.
• Ensure test assignments were conducted safely and efficiently, including system prototyping, measuring instrumentation and conducting testing.
• Plan and arrange for regular maintenance for lab facilities and tools. Follow up with repairing, addition and improvement works.
• Coordinate with factory facility and outside contractors for sub-contract jobs, make sure the work carried out by contractors meet specific requirement, and ensure contractors are following strictly with Carrier’s safety requirements.
• Maintain regular records and improve procedures for team CX and safety, including safe work procedures, TPMs, risk assessments.
• Comply with company and regulatory ethics and EH&S requirements.
• Comply with company expense approval requirements.
• Actively participate in CX activities.
• Support for company recreation committee activities.

Requirements

We are looking for people who have passion in Engineering. If this is you, get in touch.

As a minimum you must have:

• Recognized degree in Mechanical or Electrical Engineering
• Diploma holders with good track record will also be considered.
• Preferably 3 years of experience in air conditioning or refrigeration industry, candidates without prior relevant experience are welcomed to apply.

Benefits

We are committed to offering competitive benefits programs for all of our employees and enhancing our programs when necessary.

Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way.

Join us and make a difference.

Apply Now!

JOB DESCRIPTION:

To carry out field service attendances to troubleshoot & repair cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

REQUIREMENTS:

To carry out field service attendances to troubleshoot & repair cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

The successful candidate will have solid working experience with Crane and repair machinery makers such as:

MacGREGOR

IHI

MITSUBISHI

LIEBHERR

TTS

TSUJI

HATLAPA

PUSNES, NIPPON PUSNES etc.

THE SUCCESSFUL CANDIDATE WILL HAVE ALSO:

1. Experience in Inspection and Troubleshooting:

minimum of 3 years of experience in inspecting, troubleshooting, and repairing hydraulic systems, which is relevant to process industries that often utilize similar hydraulic machinery for operations.

2. Knowledge of PLC and Electro-Hydraulic Systems:

In-depth knowledge of PLC-controlled electro-hydraulic systems, as process industries frequently employ automation and control systems to enhance operational efficiency.

3. Reading Technical Diagrams:

The ability to read and comprehend electric and hydraulic diagrams, where understanding complex systems is essential for maintenance and troubleshooting.

4. Independent Problem Solving:

Stress the capability to independently troubleshoot electrical, hydraulic, and mechanical problems, which is vital in process industries where downtime can lead to significant losses.

5. Supervisory Skills:

The experience in supervising a team of mechanics and leading large repair projects can be translated to managing teams in process industries, ensuring that projects are completed efficiently and safely.

6. Technical Reporting and Communication:

The ability to write technical reports and communicate effectively with stakeholders is important in process industries for maintaining compliance and ensuring that all parties are informed about project statuses.

7. Additional Skills:

Mentioning experience with variable frequency drives (VFD) is particularly relevant, as VFDs are commonly used in process industries for controlling motor speeds and improving energy efficiency.

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add a Senior Engineer, Facility Engineering in Singapore. The position will be based in our GES Site in Marsiling.

As a Senior Engineer, Facility Engineering, you will:

Lead in Facilities Management (FM) on soft and hard service for site. Planning and scheduling in carrying out daily facilities support functions for Facilities Management. Possess experience leading a small team of both administrative/technical staff. Lastly, experienced in energy saving and improvement and Project Management (Renovations)

The key responsibilities are as below:

• Experience in Integrated Facilities Management in both soft and hard services.
• To take up as site Fire Safety Manager as requirement set by SCDF.
• Daily building walkabout to pick up and address maintenance and safety gaps.
• Coordination and effective communication with internal users, service partners as well as vendors for work.
• Prepare site related SOPs and guides to train technical personnel.
• Able to prepare Request for Quotes, source quotations and to prepare justification and summary papers for management approval.
• Raise Purchase Request / executive summary for management approval.
• Assist in preparing Master Maintenance Schedule, follow up maintenance schedule
• Ensure work delivery is of highest quality from vendors.
• Coordinate closely with HQ FM on Facilities Management approaches.
• Conduct tool box / safety briefing to vendors before commencement of work.
• Submission of Monthly Management Report (MMR) and ESG monthly reports.
• Respond to internal customer and external vendors service enquiries and closing.
• Perform any other duties relating to facilities management as assigned by the Company.

What skills and experiences are we looking for?

• Degree in Engineering / Facilities Management.
• Manufacturing environment / Managing Agent background preferred.
• With at least 5 to 8 years relevant experience in Facilities / Building environment.
• Problem solving with good solution approach to work and staffing matters.
• Fire Safety Awareness Course
• WSHO (Advantageous but not a must)
• Effective communicator, highly resilient and able to work under pressure
• Hands on in equipment maintenance and trouble-shooting.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

• Calculated BOQ and invited subcontractor for cost estimation.
• Sourced Quotations and Specifications from suppliers and contractors.
• Collected BQ and arranged cost comparison.
• Attended internal, external meeting.
• Performed site inspection to ensure that work is carried out based on specification and drawing.
• Prepared report and method statement whenever necessary.
• Supervised daily site installation.
• Day to Day management of the site, including supervised and monitored the site labour force.
• Inspected Handover inspection with consultant engineer and client.
• Follow up with clients and handover the project
• Good knowledge civil, Structure and M&E deoartment

Responsibilities:

• Checked technical specifications, M&E drawings and documents.
• Coordination of drawings with clients, main contractors and updating of drawings base on meetings and discussion.
• Produced M&E Services design drawing including electrical system and ELV system, Fire Protection system, Plumbing and waste, etc.
• Performed draft detailed for M&E shop drawings, as built drawings and standard detail and SLD drawing, Layout, Schematic based on preliminary concepts, sketches, calculation, specification sheets and other data.
• Provided technical support and assistances to project manager and engineers at every project stages.

Roles & Responsibilities:

· Responsible for analysing wastewater samples using various analytical lab methods

· Perform lab equipment maintenance, troubleshooting, and calibration

· Develop methods for wastewater treatment according to customer’s requirements

· Develop test plans, drive testing execution, analyze, document results, and report to respective PIC.

· Lead and guide technician(s) priority, workload, technical understanding

· Learn critical market drivers/needs and understand product applications

· Manage projects or sub-projects including timelines and budgets and work in an interdisciplinary team

· Consolidate and analyse data for process quality control and reporting purposes, ensure compliance with relevant standards and regulatory requirements.

· Facilitate laboratory equipment, accessories, and consumable purchase and inventory management

· Developing and maintaining an effective laboratory workforce by constantly improving work methods

Qualifications/Experiences required:

· Degree in Chemistry, environmental, chemical engineering-related engineering fields.

· Able to communicate with various levels of people.

· Pleasant personality; mature, independent, and resourceful.

· Analytical with good writing, communication, and problem-solving skills

· Self-motivated, team-oriented, and flexible individual must possess the initiative and ability to take on numerous challenging tasks, and new projects, and meet high standards and deadlines.

Description:

• Understand read of 3D drawing of equipment, piping system and pipe support
• Familiar with equipment layout drawing, detailed piping drawing and isometric drawing.
• Co-ordinate with process, civil & structural, electrical & instrumentation team, to understand the elevation & structural requirements.
• Develop MSRA for mechanical, piping construction works.
• Manage and supervisor workforce for construction works.
• Prepare the material list depicting all the materials, sizes, specification, special requirements, testing requirements to meet the design. This document shall be used as an input for procurement team.
• Review the documents & drawings of vendor supplied equipment, valves, and skids to verify the piping requirements are meet.
• Perform site inspection at vendor manufacturing unit to qualify & check vendor can supply the bulk requirement on demand.
• Assist project & engineering team for modification requirement during construction. Prepare as-built drawings after completion of construction and documents, as necessary.

Requirements:

• Degree in Mechanical Engineering,
• Minimum 3 year’s relevant experience in piping construction and developing process piping system.
• Good knowledge of GA drawings, ISO drawings,
• Knowledge & experience to work in oil & gas plant, chemical plant,
• Able to provide quick and effective technical solutions, to suit requirements at all stage of the project

Mandatory Skills

Reports To

Project Manager

Job Overview

• To work with Application and Infrastructure Teams to Setup & Configure Infrastructure, Application in OCP

Responsibilities and Duties

• To coordinate in setting up Infrastructure and support Application Infra needs
• To work with Application team to Setup, Migrate, Test Applications from VMs to OCP

Qualifications

• Well versed and Experienced in Redhat Openshift (OCP) Development & Architecture
• Knowledge in Linux OS & MariaDB
• Experience in JAVA Development, Shell Scripting, DevOps
• 5 Years minimum professional experience and 3 Years minimum relevant experience
• Willing to work in shifts and in weekends
• Team player to work with multiple teams and teammates
• Ability to work independently and handle multiple concurrent initiatives
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills
• Ability to meet deadlines with no compromise on the quality of the work product.

Job Descriptions:

• MCU hardware design and software coding in C
• Field installation
• Troubleshooting
• Document & report writing
• Support other department’s operations as and when needed
• Any other ad-hoc duties as per assign by the supervisor.

Requirements:-

• Candidate must possess at least a ITE/Advanced/Higher/Graduate Diploma in Electronic Engineering or equivalent.
• At least 1 Year(s) of working experience in the related field is required for this position.
  • Knowledge and experience in Electronic circuits (Digital/Analogue/RF)
  • Experience in MCU hardware design and software coding in C
• Work independently in the field
• Trouble-shooting capacity
• Ability to work individually and as part of a team
• Effective communication skills with the ability to communicate clearly to cross-functional teams within the company or external customers/vendors
• Class 3 driving license

RESPONSIBILITIES:

• Strong knowledge of cryptographic concepts, Hardware Security Module's, and key management.
• Hands-on experience in implementing and operating Thales SafeNet HSMs.
• Hands-on experience in designing and implementing key management solutions for enterprises.
• Knowledge of networking and network security concepts.
• Experience working on PKI / key management solutions.
• Programming knowledge in C / C++ (preferred), Java, .NET.
• Experience integrating cryptographic libraries and HSMs with applications.
• Understanding of Information Security Architecture and ecosystem technologies and concepts required like firewalls, monitoring tools, encryption, web proxies, and identity & access management.

REQUIREMENTS:

• Bachelor's degree in Computer Science, Cybersecurity, or a related field.
• Experience with Thales HSM or similar cryptographic solutions.
• Strong understanding of cryptographic algorithms and protocols.
• Familiarity with compliance standards (e.g., PCI-DSS, GDPR).
• Excellent problem-solving skills and attention to detail.