Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

• PlanningCreating plans and specifications for projects, including safety considerations
• Managing staffAssigning tasks to crews, and ensuring projects are completed on time and to specifications
• Installing and repairing pipingOverseeing the installation and repair of piping systems, and ensuring they are done correctly
• Ensuring safetyEnsuring that the work area is safe, and that safety regulations are followed
• Conducting inspectionsRegularly inspecting piping systems to ensure they are installed correctly and functioning properly
• Monitoring progressMonitoring the progress of piping work, and ensuring it is completed on time and within budget
• CommunicatingCommunicating with clients, suppliers, and other stakeholders to ensure effective project execution
• Review and monitor engineering design progress related to piping work scopes.
• Understand P&ID and piping routine requirements.
• Understand non-piping design related requirements such as fabrication, erection, painting, QA/QC, testing and commissioning.
• Monitor the comments from Client and Classification Society.
• Monitor all the piping related interface points.

Requirements:

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Min. Bachelor Degree in Mechanical Engineering.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.
• Good knowledge in Piping Design.
• Good knowledge in International Standards related to Piping such as ASME, ASTM, API and Classification Society Rules and Regulations.
• Good skill in Excel is preferred.

Position Overview: We are seeking a motivated and detail-oriented Project/Site Engineer for Architectural and Structural systems to assist in the supervision, coordination, and execution of construction projects. The ideal candidate will play an integral role in managing various site activities, ensuring quality control, and facilitating communication between internal teams, subcontractors, and clients.

Key Responsibilities:

· Assist in architectural system site supervision works, ensuring quality and progress.

· Coordinate project planning, documentation, and execution of works on-site.

· Oversee project works, manpower mobilization, material planning, and ordering.

· Communicate internally with various departments and externally with clients and subcontractors.

· Coordinate and follow-up on project submissions to authorities.

· Produce regular site progress reports and submit necessary documentation.

· Attend meetings and conduct site inspections to ensure quality control.

Additional Responsibilities:

· Manage all aspects of architectural system site works.

· Supervise manpower scheduling and deployment to meet project timelines.

· Ensure the timely completion and quality of subcontractor works.

· Prepare and submit method statements and other required reports.

· Review and monitor architectural and structural system drawings and approval statuses.

· Collaborate with project managers and stakeholders to resolve site issues.

Qualifications and Requirements:

· Minimum 1-5 years of experience in construction projects.

· Strong communication skills and ability to interact with people at all levels.

· Familiarity with project management processes across all project stages.

• Supervise a team of Service Engineers in delivering a wide array of technical after-sales service support, including installation, commissioning, repairs, and preventive maintenance plans for laboratory and hospital infrastructures, as well as research and analytical equipment within the medical imaging sector.
• Additionally, offer technical consultation to customers, address their requests by troubleshooting issues, and implement corrective measures within the designated timeline, while also preparing service reports.

What are we looking for?

• Minimum Degree in Electronics, Electrical, Mechanical Engineering, or a related field is required.
• Candidates should have at least 6 years of pertinent technical experience in service and maintenance.
• A valid Class 3 driving license, along with ownership of a personal vehicle, will serve as a significant advantage.

Next Step:

Please submit your updated resume in MS Word format by clicking the QUICK APPLY button.

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Liew Jie Ru

EA Licence No: 24C2293

DESCRIPTION

- Sizing, calculation, design layour, quantities and estimation based on drawings

- Provide technical support to sales team

- Prepare quote and technical proposal

- Attend meetings with consultants, engineers and clients

- On site troubleshooting/servicing work, resolving technical issues including system testing and commissioning

- Any adhoc tasks assigned by the management from time to time

REQUIREMENTS

- Knowledge in electrical and electronics

- Competent in AutoCAD

- Knowledge of BIM

Company’s Profile

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for Assistant Engineers (Piping and Instrumentation) to join their team and contribute to their ongoing success.

Location: East

Working hours: Monday to Friday, Standard Office Hours

Responsibilities:

• Be well-informed and understand MEP or construction drawings.
• Discuss with PM/HOD for site problems and technical difficulties.
• Monitor sub-contractors / vendors work, conduct quality checks on their work daily and ensure safety practices are followed.
• Track materials to ensure sufficient materials are readily available for installation.
• Inspect incoming materials and equipment deployed to work sites.
• Go for site inspections with client/main contractors representatives and update progress.
• Keep drafter updated on site changes and as-built drawings.
• Arrange and attain permit to work before execution of site.

Requirements:

• Min. NITEC/ Higher NITEC in Electrical Engineering or other engineering fields.
• Min. 1 year experience in building, construction or engineering industry.
• Electrical engineering background is preferred.
• Possess BCSS certification - Building Construction Supervisor Safety or Supervise Construction Work for WSH is a plus.

Your recruiter for this job: WhatsApp Celine @ 6421 4966 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-celine-chan

Celine Chan | R21103433

Talentsis Pte Ltd | EA No: 20C0312

Job Description

• Work along with the Project team in the DevOps environment.

• Guiding the continuous integration, continuous deployment and continuous testing.

• Work closely with the development team and operation team to create DevOps strategy and toolset that suits the individual squads.

• Setup, deploy and maintain scalable, high availability systems

• Perform and automate deployment and security hardening of systems

• Automate and build up scalable containerised systems/environment using latest technologies (e.g. Redhat Openshift, MLOps tools, etc)

• Automate security hardening in testing, deployment and production setup based on industrial best practices

• Setup and maintain CI/CD, automated testing, development and delivery environments

• Writing scripts/programs for service monitoring and health check of systems

• Day-to-day monitoring, backup, deployment and maintenance of systems

About You:

• Experience with cloud orchestration, configuration management and auto-scaling techniques

• Experience on building and developing CI/CD pipeline and workflow (Gitlab CI/CD preferred)

• Experience on building and managing container image pipeline

• Experience with automation tools such as Ansible/Terraform

• Experience with installation and configuration of Redhat SSO

• Experience with load balancing setup for TCP/IP, HTTP, DNS, routings

• Knowledge of IT security standards, such CIS

• Good hands-on experience on using Infra-as-a-Code for configuration management and application deployment

• Overall knowledge on one or more of the following programming languages (Java, Python)

• Knowledge on continuous integration, test automation, version control, and software configuration management.

• Knowledge of machine learning and setup of MLOps tools such as H2O

Desired Background:

• Diploma/Degree in Electrical Engineering, Computer Science, Communications Engineering or equivalent

• Minimum 3 years in software development industry or server infrastructure setup

• Experience in software-defined infrastructure (OpenStack).

• Experience with infrastructure provision tools (Docker, Ansible, etc).

• Good understanding of hardware infrastructure systems (network switches, firewalls, routers etc.) and Linux operating system.

• Basic understanding of DevOps principles and practices. Knowledge in DevSecOps will be an added advantage.

• Self-motivated and good communication skills. Good hands-on experience on using AWS Cloud Formation scripts for configuration management and application deployment.

• At least 1-year experience working closely with infrastructure. Experience in Linux, Windows, network troubleshooting is a plus,

• Experience on working in an Agile environment, in a close collaboration with developers, Knowledge on continuous integration, test automation, version control, and software configuration management

• Excellent communication skills.

EA Number: 11C4879

Zenith Infotech (S) , a Tech Recruitment firm with 27 years of presence in Singapore, is assiting one of our clients to lookout for Data Engineer, proficient in main skill set of Talend.

Job Scope :

· Using the Talend ETL toolset, to create new and maintain existing ETL jobs.

· Design and implement ETL for extracting and transforming data from diverse sources, such as: Cloudera, PostgreSQL, and SQL Server databases.

· Design and develop database tables necessary along with the necessary constraints as per the requirement.

· Collaborate with Team members to understand source system structures and data retrieval methods/techniques, and tools within the organization.

· Support the development of data transformation logic using ETL tools or scripting languages like SQL, Python, etc.

· Clean, validate, and transform data to conform to target schema and quality standards.

· Work with the Team to execute data quality improvement plans.

· Participate in troubleshooting activities to maintain data integrity and process efficiency.

Requirements:

• Experience with Talend, Python and Spark

• Should have good knowledge and working experience in Database and Hadoop (Hive, Impala, HDFS).

• Understanding of data-warehousing and data-modeling techniques

• Knowledge of industry-wide visualization and analytics tools

• Good interpersonal skills and positive attitude qualifications

• Degree in computer science, mathematics, or engineering

Duties and responsibilities:

1. Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

2. Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

3. Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

4. To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

5. Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

6. Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

7. Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

8. Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

9. To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

10. To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

11. To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

12. Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

13. To be actively involved with quality management system of the company.

14. Perform any other duties as assigned by higher management or superior.

Responsibilities

• Plan, execute, monitor and control the various technical aspect of the project.
• Manage or participate in new setup or upgrade of system/network infrastructure projects.
• Responsible for supporting operational systems satisfying contractual Service Level Agreement
• Perform and manage routine preventive maintenance and operational activities
• Provide project documentation and reports
• Diagnose and rectify technical issue

Requirements

• Experience in Windows server OS, Unix/Linux OS & VM environment
• Good knowledge and hands-on experience with Microsoft SQL Server would be an advantage
• Good Working knowledge with VPN, firewall appliances and Cisco routers/switches
• Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment
• Pro-active, dynamic and with good analytical/conceptual thinking
• Fresh graduates are welcome to apply

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Responsibilities:

• Work closely with other members of the team to develop software solutions to grow the P&L
• Design, develop and own high-performance solution stacks
• Maintain, monitor, extend and optimize existing trading systems
• Contribute to the firm’s technical roadmap
• Contribute to inter-team and cross-team efforts to ensure success of the business
• Provide L3 support for production issues

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering or similar disciplines
• Familiarity with Linux operating systems
• Good communication skills
• Interest in financial markets (with at least a basic understanding of cryptocurrencies)
• Must be able to multitask and work with minimal supervision
• Good grasp of software engineering principles
• Ability to translate non-technical requirements into technical tasks
• Good understanding of low-to-high level testing and performance optimization principles, statistical performance measuring and test-driven development approaches
• Understanding of low-level performance tuning concepts (e.g. microprocessor architecture, Linux kernel, networking, blockchain architecture)
• Experience working on high performance, low latency trading systems is a must
• Proficiency in Python and/or C++ preferred
• Knowledge of SQL and NoSQL (e.g. Redis, Mongo, Timescale) is a plus
• Knowledge of other technologies such as CI/CD, Docker and Kubernetes is a plus
• Familiarity with cloud computing services is a plus

Job Description

• Lead and manage the electrical engineering design works.
• Prepare and review the design of the electrical works, e.g. equipment sizing, cable sizing and voltage drop calculation, power system study, electrical layout single line diagram, schematic drawings, etc.
• Handle equipment packages and procurement including technical specifications, technical clarification, technical bid analysis, etc.
• Develop cost estimates for electrical equipment and electrical works.
• Develop work schedule and coordination of the project works.
• Review the sub-consultants, sub-contractors and vendors' design and submission, ensuring all project specifications and design standard are met.
• Prepare all relevant checklists for installation, testing and commission works.
• Collaboration with multiple stakeholders including internal teams of different trades, clients, consultants, other packages, sub-contractors, and vendors.
• Attending to client's comments and ensuring client's approval and acceptance of all electrical works related design, installation, testing and commissioning works.
• Handle and resolve all site technical related matters.

Requirements

• Bachelor Degree in Electrical Engineering
• 5 to 8 years of relevant experience in construction industry. Working experience in water or wastewater industry will be an advantage.
• Experience in design, installation, testing and commissioning of electrical works, e.g. high voltage system, low voltage system, transformers, motor starters, cabling works, earthing and lightning protection system, etc.
• Experience in project execution, project coordination, supervision and coordination
  with clients, consultants, and all other sub-tier under the Contractor.
• Good technical knowledge in electrical system.
• Well verse in power system analysis software e.g. ETAP and BIM software e.g. Bentley, Revit and Navisworks.
• Team player with good interpersonal skills.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and able to work independently with minimal supervision.
• Will be required to work full time at project site.

Role and Responsibilities

• To co-ordinate with the clients, subcontractors, and consultants on project matters
• Management, supervision and coordination of construction activities.
• Supervise team members, subcontractors and daily work activities on one or more project site(s) allocated.
• To ensure supervisors and workers meets client & regulatory requirements, environmental, safety and health requirements
• Monitor progress at site and put up progress claim.
• Coordinate and assist QS and Project Manager on project progress and claims.
• Other adhoc duties by management assigned from time to time.
• Participate in project design meetings and propose improvements.
• Evaluate potential problems and technical hitches and develop solutions.
• Plan and manage team goals, project schedules and new information.
• Manage project-related paperwork.
• Direct project correspondences by preparing and reviewing project proposals, memos, meeting minutes and emails.
• Communicate with clients to identify and define project requirements, scope and objectives.

Requirements

• Minimum Diploma Holder/ ANY
• Minimum 5 years' experience in site coordination.
• Excellent project management skills
• Team leadership
• Working knowledge of various computer software programs (MS Office, POS)

Requirements:

Minimum - bachelor’s degree in civil engineering

Job Description

1. Experience in Civil Engineering Design works in the area of;

- Structural Steel design

- Reinforced Concrete design

- Geotechnical Engineering Design

4. Able to work under rushing schedule of works

5. Able to do AutoCAD drafting (if required)

6. Familiarize with preparation of Authorities Submission documents (BCA, URA, JTC, etc..)

7. Able to communicate with clients and Authorities

Job Description & Requirements

•To plan and execute corrective/preventive maintenance on facility equipment and production equipment to ensure good efficiency and availability.

•Implement TPM program in HPSL such as autonomous maintenance and critical spare part management.

• Engage external equipment vendor for service contract and ad hoc diagnostic or corrective maintenance activities.

• Support safety and EHS related activities and audits.

Duties:

1. Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.

2. Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.

3. Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.

4. Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.

5. Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.

6. Perform site EHSS inspection/audits and ensure that all corrective / preventive actions are close in timely manner. Responsible for internal/external audits and EHSS activities.

7. Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience

8. Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Knowledge:

• Hands on experience in mixer and milling equipment maintenance is an advantage.

• Knowledge in TMP, Equipment FMEA is an advantage.

• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.

• EHS competence, familiar with ISO45001 & ISO14000 is a plus.

• Diploma / Degree in Mechanical or related discipline

Skills:

• Able to read electrical, hydraulic, pneumatic and mechanical diagrams and carried out maintenance work accordingly.

• Lead and guide technicians on above work.

Abilities:

• Operational hands-on experience

• Work under pressure and multi-tasking.

• A good team player and have good interpersonal skills

Jessie Hoe Huey Miin

CEI Reg No: R1103861

EA: 99C4599

• Great exposure to a variety of projects in various technologies
• Attractive remuneration and benefits package

About Our Client

We are partnering with a well-established organisation in the IT security industry, headquartered in Singapore with global presence in multiple countries as well.

Job Description

• To be involved in the development, application support testing and implementation of new systems, change request and solutions
• Able to work with software architects to understand the overall technical architecture and how each feature is implemented
• To be responsible for executing defined processes and solutions, retrofit code fixes for base issues into customer environment
• Working effectively in an Agile environment

The Successful Applicant

• Has experience with .NET, C# programming, Angular 4+, ASP.Net Core, MVC, Web API, Entity Framework, JQuery, CSS/CSS3, GIT
• Strong understanding of web fundamentals including HTML/CCS
• Has experience with web programming and scripting languages, including JavaScript, ReactJS, Java etc
• Strong knowledge with DevOps skills such as CI/CD, Docker, Kubernetes etc
• Experience working on Cloud environment is an advantage

What's on Offer

• Permanent role
• Great exposure to a variety of projects in various technologies
• Attractive remuneration and benefits package

Contact

Cheryl Ang (Lic No: R2091316/ EA no: 18C9065)

Quote job ref

JN-102024-6570734

Phone number

+65 6416 9884

Page Personnel Recruitment Pte. Ltd.| Registration No. 201736642C

We are looking for a motivated and enthusiastic System Engineer to join our client's team. As a System Engineer, you will help design, implement, and maintain the infrastructure and systems that support their technology environment. This role is open to fresh graduates who are passionate about learning and eager to contribute to system operations, security, and optimization.

Responsibilities:

• Assist in the setup, configuration, and maintenance of system hardware and software.
• Monitor and troubleshoot system performance, ensuring high availability and reliability.
• Support the deployment of software, updates, and patches across servers and networks.
• Collaborate with other teams to ensure the systems meet operational requirements.
• Implement security best practices to safeguard data and maintain system integrity.
• Participate in system performance analysis, backups, and disaster recovery procedures.
• Continuously learn and stay updated on the latest trends in system engineering and IT infrastructure.

Qualifications:

• A graduate in Computer Science, Engineering, Information Technology, or related field (or equivalent experience).
• Basic knowledge of operating systems (Linux, Windows, etc.) and network configurations.
• Familiarity with virtualization technologies (e.g., VMware, Hyper-V).
• Understanding of system monitoring tools and performance metrics.
• Strong problem-solving skills and a willingness to learn.
• Ability to work effectively both independently and as part of a team.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

JOB DUTIES & RESPONSIBLITIES:

1. Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.

2. Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.

3. Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.

4. Work with HR Department and assure that employee grievances are addressed in a timely fashion.

5. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.

6. Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.

7. Maintain and improve housekeeping in all areas.

8. Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.

9. Ensure on time submission of overtime record to HR Dept for computation of monthly salary.

10. Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.

11. Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.

12. Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.

13. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.

14. Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.

15. Assist in hiring of production personnel.

16. Maintain and update operating manuals for all the manufacturing equipment and facilities.

17. Maintain and update operating training manuals for all manufacturing processes.

18. Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Skill/Experience

* Minimum 2-3 years working experience in manufacturing environment.

* Able to supervise and lead the subordinates.

* Willing to work after working hour or during non-working days.

* Able to work under pressure.

* Computer literate.

* Knowledge in ISO is an advantage.

WhatsApp me @ 8780 0117 for a prompt response to your enquiry!

Joreen Hung | Reg No.: R24119971

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Description

Sea Forrest Engineering Pte Ltd (a subsidiary of BH Global Corporation Ltd) seeking a skilled and experienced Electrical Design and Commissioning Engineer to join our dynamic team specializing in marine vessel electrical propulsion and energy management systems. The ideal candidate will have a strong background in electrical engineering, a deep understanding of marine systems, and a proven track record of designing and commissioning complex electrical systems for marine vessels. This role will involve working on cutting-edge technologies to enhance the performance, efficiency, and reliability of propulsion and control systems for various types of marine vessels.

Responsibilities

1) Electrical Design

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.

2) Commissioning and Integration

• Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• Conduct thorough testing, troubleshooting, and validation of electrical systems to ensure proper functionality and adherence to design specifications.
• Collaborate with shipyard personnel and subcontractors to ensure proper installation and alignment of propulsion and control components.
• Coordinate with project managers to establish commissioning schedules, manage resources, and ensure timely project completion.

3) System Optimization and Performance Enhancement

• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.

4) Documentation and Reporting

• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Generate commissioning reports, test procedures, and status updates for internal teams, project stakeholders, and clients.

5) Regulatory Compliance and Safety

• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Requirements

• Diploma or Bachelor's degree in Electrical Engineering or related field.
• Proven experience (5+ years) in electrical design and commissioning, preferably in marine propulsion and control systems.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.
• Familiarity with marine industry standards (e.g., ABS, DNV, IMO) and relevant regulations.
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Effective communication skills for collaborating with multidisciplinary teams and presenting technical information to clients and stakeholders.
• Project management skills with the ability to manage priorities, timelines, and resources effectively.
• Willingness to travel to shipyards and vessels for commissioning activities.
• Willingness to travel overseas as required.
• Positive with a can-do attitude.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

About ST Engineering

ST Engineeringis a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Satellite Systems

ST Engineering Satellite Systems Pte. Ltd. (SatSys) is a joint venture founded in 2010 by ST Engineering, DSO National Laboratories, and Nanyang Technological University. Today with our expertise and comprehensive suite of satellite engineering and test facility, SatSys design and develop satellite buses to integrate with various payloads, such as Electro-Optical (EO) camera, Synthetic Aperture Radar (SAR) and more, to meet the mission objectives of our customers.

Together, We Can Make A Significant Impact

You will be joining the System team and will be involved in System Level Assembly, Integration, and Test activities across different satellite projects. The team will be exposed to various fields of engineering and are responsible for understanding the different subsystems on the satellite to plan and execute system level activities.

A successful Systems Engineer is one that demonstrates critical thinking when faced with challenges across a wide variety of engineering domains. It is essential that the engineer is able to work comfortably with diverse groups of design engineers while tackling complex design or development issues. The goal of the System team is to ensure that all satellites achieve their mission objectives.

Be Part of Our Success

• Interface with our engineers to establish system level integration and verification plans to optimize system development cycle.
• Define and establish test requirements, plans and procedures for execution of system level tests.
• Plan and manage System Level Assembly, Integration, and Test activities schedule in projects.
• Perform System Level Assembly, Integration, and Test tasks and produce relevant documentation.
• Design, develop and deploy EGSE for System Level Tests and Simulation Activities.
• Plan and participate in system test and launch campaigns.
• Continuous learning and improvement in system engineering skills and knowledge in the area of design, verification, and simulation for space application.

Qualities We Value

• Knowledge in Electrical, Electronics Engineering or Aerospace / Space Systems Engineering
• Experience in Satellite Systems engineering is an advantage
• Analytical and problem-solving skills
• Verbal and written communication skills to effectively influence the actions of internal stakeholders and manage external relationships with customers/vendors
• Knowledge on high-level programming language (e.g. C, C++, C#, LabVIEW, Python)
• Good interpersonal skills and team player
• Singaporean only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Working Location: Ang Mo Kio

Job Description

• Industry/ Organization Type: Wholesaler & Manufacturer/ AV Equipment
• Position Title: Project Engineer
• Working Location: Kallang
• Working Hours: 5 Days (Mon – Fri, 9 am – 6 pm)
• Salary Package: Basic Salary + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Lead and manage internal teams, including AV Designer, Drafter, Engineer, Site Engineer, and Safety Officer.
• Coordinate with external stakeholders such as Consultants, Main Contractors, Subcontractors, Manufacturers, and Suppliers to ensure successful project delivery.
• Study and analyze schematic designs and construction drawings to create accurate AV construction drawings.
• Oversee project schedules, budgets, and change orders, and manage the Bill of Material (BOM).
• Ensure customer satisfaction by managing their expectations and delivering a positive customer experience.
• Plan, manage, and allocate necessary resources to ensure project timelines and goals are met.
• Other additional tasks as assigned.

APPLY NOW!!!

• Minimum Diploma in any discipline.
• At least 2 years of experience in project management for construction sites or A&A works (preferably related to M&E or ELV solutions such as CCTV or structured cabling).
• With Audio Visual technical knowledge or project management experience is a plus.
• Ability to interpret construction drawings.
• Able to work independently in a fast-paced environment.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #70068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781