• Setup and troubleshooting of semiconductor equipment and record engineering improvements for future reference
• Build procedures for assembly, inspection and testing of equipment

Requirements:

• Diploma in Mechanical/Mechatronics Engineering
• At least 2 years of experience in setting up automation equipment
• Knowledge of Electro Mechatronic System

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

* Location: Jurong Island

* 5days work

General Scope:

1. Support in implementation and participate in the continuous improvement effort in the areas of Safety, Quality, Environment and Health Management System (for example SS506 part 3, ISO 9001, ISO14001, OHSAS 18001, IATF 16949).

2. To have a legal obligation to act in a responsible manner for the safety of themselves and other persons who may be affected by their actions or omissions at work.

3. Assist the Management in ensuring that Major Accident Hazards are reduced to As Low as Reasonably Practicable (ALARP) and escalate when necessary.

4. Ensure compliance to Customer Specific Requirements (CSR).

5. General Duty
a) Member of the production leadership team that formulates the goals and strategies for the department.
b) Shall be familiar with production plant technically, and has the responsibility to support production team appropriately to improve the plant safety, quality and efficiency
c) Has the responsibility to support research and development in manufacturing technology in the facilities of the plant

6. Safety and environment management
a) Provides plant process operation support to achieve safe and stable operations and quality products
b) Manage operation and Safety, Health and Environment related issues and solve if any problem arises
c) Review abnormality report, non-conforming product report, accident/ incident report, support investigation and propose corrective and preventive measures
d) Planning for operational Non-regular work, provide work instruction and training to Supervisor and technicians via toolbox meeting
e) Support regulatory requirement such as water efficiency management plan, energy conservation act and Workplace safety and health act (Major hazard installation regulation)
f) ISO14001 implementation
• To identify the environmental aspect of its activities in the department, including activities it can influence taking accounts planned or new developments or new modified activities and product.
• To provide appropriate control to the significant aspect identified
• To ensure proper environmental documentation and records are filed
• To ensure proper monitoring and measuring of the operations that have significant environmental impacts.

7. Operation Support
a) Setup and maintain operating conditions, guides, check sheets and logs sheets in collaboration with shift teams to ensure environment, health, safety, quality and productivity requirements are met
b) Administration control and monitoring of DCS system, to ensure changes to DCS / SIS sequence and settings are properly documented. Alarm optimized to prevent nuisance alarm.
c) Trouble shooting of production process and quality problem
d) Assist in training the shift team members through new/revised procedures, abnormality report, one-point lesson sheets and work instruction. Educate production operation shift and day team employees on proper methods in which to operate process and machinery. Provides relevant operational training and guidance to team members to accomplish production goals.
e) Lead and support ASDM work, assigned by superior, including planning and certain work Instructions making to include various phases including push back, purge, LOTO, leak test, N2 replacement, flushing, filling and commissioning
f) Provide leadership in production committee to facilitate programs or implement action items driven through respective committee
g) Support ISO 9001 and IAFT16949 implementation
h) Offer operational support related to raw material supply changes or troubles

8. Process Improvement
a) Responsible for process optimization and capacity improvement projects in the plant
b) Lead the operational MOC and ensure action plan related to the change has been implemented
c) Implement cost reduction measures or projects to reduce the cost of production
d) Analyze data and implement debottleneck effort of the production process
e) Initiate improvement effort for products quality
f) In close cooperation with technical department members, support and implement new product / process plant trials.
g) Prepare monthly Production Uptime report. Perform analysis and come out with improvement solution. If needed, work with Technical division (and its relevant department) to reduce the equipment downtime.

9. Capital expense project (Capex management)
a) Follow up of assigned capital expense project and related documentations including non-regular work, capex form, MOC form and risk assessment checksheet and obtain necessary approval
b) Carry out preliminary process design and identify potential hazards / risk
c) Liaise with Vendors for preliminary quotes, specification and drawings of the capital jobs
d) Control the budget allocation and schedule for the capex project
e) Coordinator for project execution as the key contact between contractor and plant group (Shift team, maintenance department, QC department, EHS department)
f) Ensure completion of project including documentation update such as updating process safety information

10. Production spares and tool management
a) Manage and check assigned production spares or consumable to ensure enough to support daily operations
b) Coordinate calibration / repair of production tools or equipment assigned to day process group

11. Additional reference of OE duty & responsibility in compare with PE and DS.
a) Identify and develop area of improvements (including production rate) to effectively utilize equipment, materials, and manpower to maximize production without compromising EHS and quality.
b) Evaluate current production activities and make recommendations for EHSQ and efficiency improvements. (Note: common job scope for Sr. Day Supervisor/SDS too)
c) Provide engineering support for production, maintenance, and other improvement activities to ensure maximum production, improve EHSQ and cost savings and other efficiency.
d) Ensure shift teams are following the existing process control parameters. (Note: New process control parameters is established by Process Engineers or new installation PIC)
e) Liaising with SDS on process control suggestion for improvement and work with engineers in other department to make necessary adjustment on the existing process control parameters. E.g. interlock pressure setting etc. Changes on the existing process control parameter is to follow AKSS’s MOC/NRW procedure.
f) Determine which machines, equipment, etc. will be used and where they will be stationed in the facility. If necessary, collaborate with Technical division (and/or its relevant department) to ensure the right machine/equipment is being procure & use.
g) Diagnose origin of operational breakdowns, including human factor. Troubleshoot the problems with relevant department(s) and implement resolution plan that assigned to him/her.
h) Keeping abreast of advancements in engineering and production and sharing knowledge with co-workers.
i) Identify unsafe operations and practices and report the same to Manager immediately.
j) Assists Assistant Operation Manager and/or Production Manager in budget preparation and monitor expenses and profitability.
k) Follow and adhere to all state, federal and company enforced EHSQ rules and regulations.
l) Collaborate with engineers from other department(s) on daily and/or per needs basis to achieve safe and stable operation and produce high quality products. E.g., during NRW period, improvement projects implementation, commissioning, etc.
m) Develop operational strategies to achieve production and financial objectives.
n) Establish new operating procedure/Work Instruction/Check Sheet and risk assessment for production activities. (Note: SDS- to review and update existing procedure/check sheets/RA, also to develop simple new procedure/check sheet/RA)
o) Develop operational best practices to improve production capacity, quality, and reliability.

REQUIREMENTS

1. Degree in Chemical / Mechanical engineering or its equivalent
2. Minimum 2-year experience as operation engineer in a chemical processing plant
3. Good knowledge of chemical engineering, mechanical engineering and / or polymer science
4. Experience in a process safety management, quantitative risk assessment such as LOPA (layer of protection analysis) or safety case preparation will be advantageous
5. SCEM, or Steam engineer/ boiler attendant certificate, preferable
6. Working knowledge in ISO9001, ISO14001, SS506-Part 3, cost control and regulations
7. Highly motivated, energetic individual, with inquiring mind set and willingness to take up new challenges
Good interpersonal and communication skills

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel and based in China and Vietnam at least 10 months per year. (separate living arrangements provided, includes four round-trip tickets to Singapore annually)

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Production Engineer

• Working hours: 5 Days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong East MRT)
• Salary Range: $4500 - $6000

Position Summary:
The Production Engineer is responsible for improving the production technology of the EVAL site which will be launched in second half of 2026. The Production Engineer supports the production team for identifying, investigating, and resolving production issues in technical aspects. The Production Engineer leads technology for process control (DCS, SIS), operation condition, and product quality improvement and joins project work related to production technology development and improvement. Until the startup of EVAL production line, training and learning opportunities of EVAL production technology is provided by experienced members in Company. The Production Engineer will be a member of the commissioning and startup team of new EVAL plant and is responsible for designing and optimizing the process condition and process control system (DCS) and supports other production team members to achieve safe and stable commissioning and startup of new EVAL plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Preferred Requirements:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction process, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programming and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

About the role: Our client is a leading chemical manufacturing company that is expanding their existing operations in Singapore.

Work Location: Jurong Island (Company transport is provided to and from Jurong East MRT station).

About the role:

The Production Engineer (HSE) is responsible for overseeing daily operations and project safety, ensuring compliance with all safety regulations, and driving continuous safety improvements. This role involves managing risk assessments and ensuring occupational safety standards are met.

Responsibilities:

• Lead daily operations as an HSE Production Engineer, ensuring safety across both daily operations and construction projects at the site.
• Manage the HSE aspects of operations, including risk assessments, Hazop studies for new modifications, changes to operating procedures, and site construction activities.
• Review and identify high-risk activities in the process operations based on Hazop studies, and hold regular meetings with the production manager to develop plans for improving safety in these high-risk areas.
• Work closely with production and logistics teams to ensure safe work procedures are followed in the process operations.
• Review and prioritize safety observation feedback based on risk levels, following up through the MOC process. Ensure improvement actions are tracked with records and timelines.
• Collaborate with project engineers, production teams, and maintenance coordinators to ensure safety-related projects are executed and completed on time.
• Review emergency and disaster prevention procedures, ensuring they are up to date and aligned with current operations.
• Lead and drive any additional HSE improvement projects or activities.
• Perform any other tasks or duties as assigned by superiors.

About you:

• Experience working in the chemical industry
• In-depth understanding of safety legislation and regulations within the chemical sector
• Diploma or degree in Engineering, Health, Safety, or Environmental studies
• Proficient in Microsoft Office applications
• Strong written and verbal communication skills
• Excellent organizational abilities
• Strong analytical skills with the capacity for critical thinking

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Job description:

Customer support:

• To arrange service visiting, install, repair, troubleshooting, and relocation on site.

• To set up and dismantle equipment for demonstrations.

• To conduct equipment familiarization training for users.

• To answer service enquiries.

• To attend user’s meetings.

• To install and commission new equipment at customer’s sites.

Service administration

• To prepare service quotations, contracts, report, and invoice.

• To arrange spare parts from suppliers.

• To send / deliver repair item and spare parts.

• To collect equipment for in-house repairs.

• To deliver new equipment to customers.

• To attack and pursue outstanding debts.

• To send faulty parts to vendors for checking and testing.

• To furnish technical information and quality report to Principal.

Job requirements:

• Min. Diploma in Engineering

• Min. 1 to 2 years of experience in going clients’ sites to perform servicing

• Experience in medical device servicing is advantageous

Apply now by sending your resume to [email protected]

We regret to inform that only shortlisted candidates will be notified

Alex Goh Hock Leong | CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Sciences) | 99C4599

Summary :

5.5 days / Alt Saturday

Site Engineer up to $6000

Senior Site Engineer up to $7000

Industry: Construction (Civil & Structural)

Industry: M&E Fire Protection

Job Scope:

1. Site Supervision: To Oversee daily construction activities to ensure they align with project plans and timelines.

2. Quality Assurance: Monitor workmanship and materials to ensure compliance with specifications and standards.

3. Coordination: Collaborate with project managers, subcontractors, and other stakeholders to facilitate smooth operations.

4. Technical Support: Provide on-site technical assistance and resolve any engineering-related issues that arise.

5. Site Inspections: Conduct regular inspections to assess progress and identify any potential problems early.

6. Documentation Management: Maintain accurate records of project progress, including daily reports, logs, and photographs.

7. Health and Safety Compliance: Ensure that all safety protocols are followed and promote a safe working environment.

8. Problem Solving: Identify issues and implement effective solutions to minimize disruptions.

9. Client Communication: Liaise with clients to update them on progress and address any concerns.

10. Budget Monitoring: Assist in tracking project expenses and resource allocation to stay within budget.

Job Requirements:

• Bachelor's Degree / Diploma in Civil Engineering / Mechanical Engineering / Electrical Engineering OR any equivalent is welcome to apply
• Strong communication, organizational skills, and a solid understanding of construction practices and regulations.
• Good to have experience with LTA project
• Entry level is welcome to apply as there's assistant engineer's vacant available & training is provided.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

• Well Established Company
• Basic $4000 - $5500 + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 6pm
• TRAINING PROVIDED

Job Responsibilities:

• Planning / Assign sub-contractors and manpower for the maintenance work and from project handover
• Supervising & Managing of Sub-contractor to carry maintenance & servicing works
• Plan and schedule Preventive Maintenance
• Perform routine check, system back-ups & restoration, troubleshooting and upgrading / improvement of system to ensure optimal functioning of BMS/DCS/PLC/SCADA System
• Record servicing & maintenance data and generate service report
• Provide Technical / Operational guidance, engineering solution to the Maintenance Site Facility Management
• Others ad hoc duties as assigned

Job Requirements:

• Minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent
• Knowledge on BMS / PLC / HVAC will be a plus point
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Position: Sales Engineer
• Working Day: Monday – Friday (8.30am – 5.30pm)
• Working Location: Woodlands
• Salary: $2300 - $3,000 + Mobile Claim + Transport Allowance (Cab-charge Card)

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Requirements:

• Possessed Diploma in Engineering or any equivalent qualification
• Prefer at least 1 year working experience
• Technically incline with Sales Experience in Semiconductor Industry are preferred
• Willingness to travel oversea as required
• Training Provided

Responsibilities:

• Identify and create sales opportunity to penetrate new accounts for parts sales and main existing products
• Service corporate accounts and manage full sales cycles
• Follow up with customer enquiries
• Build strong and sustainable relationships with customer
• Prepare sales documentation
• Any other ad hoc duties assigned

Job Description

• Industry/ Organization Type: Wholesaler & Manufacturer/ AV Equipment
• Position Title: AV Engineer
• Working Location: Kallang
• Working Hours: 5 Days (Mon – Fri, 9 am – 6 pm)
• Salary Package: Basic Salary + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Collaborate with different parties to deliver high-quality audio-visual and video conferencing solutions, ensuring they adhere to company standards and best practices and fulfill customer requirements.
• Configure, test, and commission professional audio solutions for different venues and corporate meeting rooms, integrating them with other audio-visual and video conferencing systems.
• Provide end-user training, guiding users on how to effectively operate and utilize the implemented solutions.
• Work closely with in-house AV Designers and Engineers, as well as manufacturers such as EV, BOSE, Martin Audio, Samsung, Logitech, etc. to implement fully integrated AV solutions for spaces such as lecture halls, meeting rooms, command centres, auditoriums, and ballrooms.
• Other necessary tasks as assigned.

APPLY NOW!!!

• Minimum Diploma in IT/ Engineering/ Audio Visual.
• At least 2 years of experience in System configuration, Testing & Commissioning for Pro-Audio solutions.
• Good skills and knowledge of DSP programming.
• Experience in some of the products like Videowall, LED & LCD Display, videoconferencing, Audio Visual Switches is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #70101 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Implement software development/support for automated computer vision equipment.
• Participate in Software Development Life Cycle.

Requirements:

• Diploma in Engineering
• At least 2 years of working experience in Visual Studio Development Environment.
• Good understanding of automated Computer Vision equipment, image procession automatic

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our Client is in the Manufacturing Industry. Due to their current expansion plan, they are looking for a Manufacturing and Production Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Offer continuous technical support to contract manufacturers, resolving electronic engineering issues encountered during production.
• Work closely with manufacturers to establish and uphold rigorous quality control standards, ensuring reliable and consistent product performance.
• Analyze manufacturing workflows to identify and implement process improvements that boost efficiency and productivity.
• Address and resolve electronic engineering challenges to prevent production delays and minimize defects.
• Collaborate with design and development teams to implement design enhancements that improve product quality and streamline manufacturability.
• Coordinate investment audits with cross-functional teams, conduct regular physical asset inspections, and assist with annual inventory checks as needed.
• Any ad-hoc duty as given

Requirement

• Min Bachelor's degree in Electronic Engineer or a related field
• Min 4 years in EMS - Electronic device assembly
• Good understanding in overall supply chain, manufacturing technology, process set-up, process validation and SOP support
• Knowledge and experience in manufacturing, planning, quality, SAP, PLM
• Knowledge and experience in wearable electrical device's assembling
• Comfortable to travel overseas often

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Assistant/Maintenance Engineer (Rotating and Static Equipment)

Responsibilities

• Carry out preventive maintenanceworks in accordance to the preventive maintenance program.
• Manage information and data of maintenance and inspection in the inventory and planning system R-MIC.
• Responsible and coordinate with project team and/or contractors in the big construction or modification work as mechanical engineer.
• Responsible and Coordinate with production team and/or contractors in the investigation of cause of equipment breakdown and propose remedial action.
• Carry out piping design work and manage the actual piping work with safety.
• Carry out small civil design work (e.g. Equipment foundation, Shelter, Loading bay, ACMV and etc.) and manage the actual civil work with safety.
• Coordinate with contractors onsite inspections and repair and maintain and jet cleaning.
• Document management (e.g. To make SOP, WI, RA and presentation slide, To manage drawings for construction, replacement and modification).
• Assist in the preparation of Shut down Maintenance (SDM) planning and execution.
• To take quotation and checking of machine parts and construction work.
• Manage spare parts and consumables inventory for replenishment of stocks.

Requirements

• Min Diploma in Mechanical / Mechatronic Engineering or equivalent.
• Mechanical knowledge and experience (Disassembling, assembling and overhaul of plant equipment and machinery (Such as Pumps, Compressor, Blower, Gear box, Agitator, Mechanical seal and Piping)
• Basic mechanical experience (Maintenance, Repair, Overhaul work)
• Prepared to be on standby to respond to plant emergencies after office hours.
• An effective team player with excellent service attitude.
• Possess strong safety awareness.

Interested applicants please submit your resume to [email protected]

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a Electrical and Instrument Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Job Responsibilities of Electrical and Instrument Engineer:

• Review project specs to ensure equipment design meets contract requirements.
• Prepare, review, and approve instrumentation and electrical deliverables (e.g., lists, data sheets, diagrams, schedules).
• Create material requisitions and perform technical bid evaluations for electrical and instrumentation equipment (e.g., transformers, MCCs, flowmeters, control valves).
• Develop engineering standards and procedures for design and production.
• Monitor project costs, timelines, and compliance with technical specifications.
• Attend technical and HAZOP review meetings to address client feedback.
• Support plant start-up, commissioning, troubleshooting, and manual preparation.
• Provide technical support to sales, engineers, and project managers.
• Self-manage daily engineering tasks while adhering to health and safety protocols.

Requirements

• Bachelor’s degree in engineering discipline
• 5 years’ E&I experience in water treatment industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

We are looking for an L1+L2 App Support Engineer to join our dynamic team! You will play a crucial role in ensuring the smooth operation of applications and providing technical support to end users.

• Competitive remuneration package (up to $4,000 + AWS + VB).
• Hybrid working arrangement.
• Be part of a collaborative and supportive team that encourages growth.

Responsibilities:

• Provide assistance to users, addressing inquiries, troubleshooting issues, and quickly implementing solutions to restore systems to full functionality.
• Keep detailed documentation of user interactions, reported problems, solutions applied, and any further actions needed by management or tier 2 support.
• Create user manuals and troubleshooting guides to aid both support teams and users in effectively interacting with the system.
• Work closely with L3 Technical staff and the project manager to set objectives and plan system upgrades and improvements.
• Develop and implement new procedures to boost efficiency, enhance customer satisfaction, and reduce operational costs.

Job Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Prior experience with some programming languages (HTML, JAVA) will be an added advantage.
• Good writing and communication skills.
• Strong troubleshooting and problem-solving skills with experience in identifying and resolving complex technical issues.
• Experience with ticketing systems (e.g., JIRA, ServiceNow) and version control tools (e.g., Git) is a plus.
• Prior experience in supporting mobile or web applications.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

• Develop and implement software for automated equipment operating at high speeds.
• Carry out software design, coding, testing, debugging, and validation.
• Assess and define system performance and specifications.
• Perform software maintenance on existing equipment.

Requirements:

• Degree in Engineering or equivalent.
• At least 3 years of software development experience in the automation/semiconductor industry.
• Hands-on experience in programming multi-threaded windows application using Visual C++.
• Good understanding of electronic components, motion control and interfacing with inspection systems.
• Willing to travel overseas for field support when required.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website atwww.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Collaborate closely with the Planning and Project Controls Manager to perform planning and scheduling, risk management, cost control, and reporting activities throughout the detailed design and construction phases of the project.
• Act as the main contact for planning, scheduling, and cost analysis, developing accurate cost forecasts and actionable reports to support effective project management.
• Prepare and deliver clear status reports, issue network-based schedules, update Primavera P6 with project progress, and monitor earned value systems to guide team performance and understanding.
• Strong knowledge of planning and scheduling to identify scheduling issues and recommend corrective actions and implement relevant control services.

Requirements:

• Degree in Project Management or equivalent
• At least 5 years EPC/full-service project delivery processes and apply project controls methodologies and practices specifically related to cost control development.
• Strong verbal and written communication skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities:

· Design, implement, and configure OpenShift clusters and containerized applications

· Develop and maintain technical documentation related to design, configuration, usage, troubleshooting, backup, recovery, etc., for all OCP environments

· Provide Technical assessment and advisory in relation to design, installation, configuration, including system upgrade and migration of OCP environment, including the operators for OCP

· Collaborate with development teams to onboard and optimize applications on the OpenShift platform

· Implement best practices for containerization, orchestration, and automation using OpenShift

· Troubleshoot Red Hat OCP configuration and services and container issues, working in collaboration with other relevant IT areas and vendor support towards a quick and effective resolution

· Work on container security solutions and ensure compliance with security policies

· Manage OpenShift clusters for performance, availability, and capacity planning

· Perform assessments and health checks of existing solutions and provide best practice recommendation and guidance to Support team.

· Automate deployment process

Requirements:

· Minimum 10 years of practical experience in the implementation of OpenShift/Kubernetes environments

· Expertise with the RedHat OpenShift Container Platform/Kubernetes.

· Experience in dealing with container configuration management, especially Helm and app-of-apps concepts.

· Experience working with infrastructure as code technologies such as Ansible, Terraform.

· Knowledge of application development, ideally Java Spring Boot.

· Experience in CI/CD Pipeline.

Key Domain/ Technical Skills:

· Containerization, Linux administration, Virtualization, Networking, and Security

· Providing first class level 3 support

· Java Spring Boot, Helm, OpenShift, Kubernetes

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quotation Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Review and comprehend technical requirements outlined in customer tender documents.
• Coordinate with internal teams to collect essential data for proposal development.
• Provide technical expertise during tendering and quotation processes/activities and support the sales and marketing team with relevant engineering insights.
• Prepare cost breakdowns and delivery schedules to assist the sales and proposals team in responding to inquiries.
• Draft and compile technical documentation, such as datasheets, proposal designs, clarification notes, and responses to tender specifications.
• All other ad-hoc duties as assigned.

Requirements

• Min Degree in Relevant Qualification in Engineering or equivalent.
• Min 5 years relevant working experience.
• Proficient in Microsoft Office and CAD software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Civil Engineer (Steel/Facade/Architectural Finishes Design)

Responsibilities:

• Responsible for the execution of civil and structural design involving the preparation of calculations, drawings and detailing.
• Coordinate with client and consultant for steel structure detailed design, shop drawing, authority submission and installation schedule.
• Support the team to design for steel structure support system.
• Involve in project planning, implementation and close monitoring of projects
• Project coordination including submission to local authorities and liaison during the construction stage.
• Any other task as designated by the management

Requirements:

• Relevant Degree recognized by Professional Engineers Board (PEB)
• Min 4 years of working experience in construction & structural steel industry
• Able to understand and prepare cutting plan, structure design and outfitting.
• Ability to work independently in a fast-paced environment.
• Effective communication and good interpersonal skills.

Interested applicants please submit your resume to [email protected]

Our client is a distributor of automotive and industrial solutions.

• Manage and configure network devices such as firewalls, routers, VPNs, internet proxies, and wireless networks.
• Optimize enterprise networking, including WAN, LAN, and VPN implementations and support.
• Monitor system performance and troubleshoot issues to ensure optimal performance and reliability.

Requirements:

• CCNA certified
• Diploma in Computer Science/Information Technology or equivalent.
• At least 2 years of experience in Infrastructure Engineering.
• Good knowledge with internet architecture designs (TCP/IP, DNS, DHCP, Proxy and Firewall).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)