• Marine Electrical Equipment (MNC company)
• Basic $3000 - $4000
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspection & Quality Control: Perform incoming and outgoing inspections according to established procedures, including factory routine tests and official tests for switchboards. Ensure that non-conforming products are separated and rejected as necessary.
• Quality Documentation: Maintain quality records and file data. Highlight quality issues to the appropriate management for action.
• Authorization & Release: Authorize the rejection of unsatisfactory parts and the release of conforming parts for storage and customer delivery.
• Customer Satisfaction & Warranty: Ensure the successful testing and commissioning of switchboards on-site or on vessels, and address warranty claims or customer quality complaints.
• Problem Prevention & Solutions: Initiate actions to prevent non-conformities, recommend solutions, and verify their implementation.
• Safety, Calibration & Housekeeping: Follow safety rules, use calibrated instruments for inspections, maintain good housekeeping in the QA department, and assist the manager in meeting quality objectives.

Qualifications

• Min ITE/ Diploma in Electrical Engineering
• At least 2 years of QA experience

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

The Senior Design Engineer is responsible for structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the work place.

Value Add of Position

• Design and calculation report for reinforced concrete, steel and geotechnical works using British Standards and Eurocode.

Technical Competencies

• Technical expertise and knowledge in Foundation, Structural and Civil works.

Qualifications and Education Requirements

• Minimum Degree in Civil Engineering from accredited Universities
• Prior 6 years of experience in design and construction (structural). Preferably have done data centre, marine offshore, and mixed-development projects.
• Have completed at least 1 project (data centre, commercial bldg., industrial)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software
• Well versed in Autocad and BIM software is preferred

Process Engineer (Biologics) - Job Scope

The successful candidate will apply process engineering knowledge to support new product/process introduction and/or commercial protein biologics processes. Scope of work would include:

Data Analysis:

• Compile and analyze process data using tools such as Excel and Minitab.
• Verify data in technical reports and spreadsheets.

Process Optimization:

• Consolidate and compare cell culture and purification process manufacturing practices for the purpose of facility fit and identification of areas for optimization and alignment across manufacturing sites.

Cross-functional Collaboration:

• Participate in teams and collaborate cross-functionally with representatives from other functions and sites to support drug substance manufacturing process alignment.

Meetings and Presentations:

• Organize and conduct meetings, actively creating, generating, and presenting data/conclusions at internal and cross-functional meetings.

Technical Documentation:

• Support authoring of technical protocols and reports.

Lab Support:

• Support small-scale cell culture or purification studies while ensuring safe operation of process development (PD) activities in the laboratory.

Qualifications

• Educational Background:Degree in Chemical Engineering, Bioprocess Engineering, or Biochemistry.
  
• Skills:Possess a basic understanding of biologics and chemical engineering principles.
  Demonstrates independent motivation but also works well in a team environment.
  Exhibits excellent written and verbal communication skills.
  

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Maintain and enhance IT applicationemig new enforcements to the applications, troubleshoot five us to klerdily causes of the problerres and providing workable solution to fix thes

Design and develop IT in according to specificatiores provided.

Perform Berative prototyping te introduce and enhance new features to the cors system.

Perform design, programming Integration, system testing, mint users in Uber Acceptance Test (UAT), documentation

Generate unit tests and end-to-end test scripts to ensure nothing breaks upon deploying new features and maintain current automated scripts in Jenkins.

Troubleshoot, identify, solve issues and develop automated test cases to prevent similar issues

See through all enhancements and fixes to ensure they are property deployed to the testing and live environment within the agreed time. That includes working with the end users, server administrators, database administrators and the system analysts supporting the IT systema.

Experience and skills requirements

Degree in Computer Science, Information Systems, Information/Infocomm Technology.

Computer or Electronics Engineering or related discipline.

Must have minimurn 3 yours of working experience in this role and good experience in the following skills/technologies:

Web Application Client-side Technologies (eg. JavaScript/Typescript ESS/E ReactJS, React Hooks, Redux, jQuery, HTMLSICSS, AJAX/JSON, NPM)

Web Application Server-side Technologies (eg. Asp.NET Core, Asp NET MVC.

Web GIS Technologies (eg. ArcGIS JavaScript API, ArcGIS Server REST API, GeoServer, PostGIS);

Database technologies (eg. Postgresql, MS SQL, Oracle); and

Code version control system (Ga).

Other requirements

Must have good communication skills and the ability to

Understand and communicate in English, in speech and writing.

Work with other members in a dynamic and fast-moving team

Work independently with minimum supervision

Work on own initiative and adhere to deadlines.

Added advantage with the following

Development using Microsoft Azure Cloud and/or AIVS Cloud

Open-source technologies such as NodeJS, Leaflet, GeoServer, PostgresSQL, PostGIS

Knowledge of geospatial and mapping concepts such as spatial analysis and map projections with ESRI technologies.

Experience with geoprocessing using Python scripts and ETL tools such as FIME

Experience in agile development and DevOps processes.

To coordinate between Application and Infrastructure Teams to implement the Infra Requirements for Applications

Responsibilities and Duties

• To coordinate in setting up Infrastructure and support Application Infra needs
• Ensure Operating system, Middleware, Database performance ,Security /Bug fix patches , EOS and security (ISCD) compliance in accordance to the bank standards
• Provides hands on technical expertise (SME) , senior level technical guidance to application team as necessary
• Assist and respond promptly to incident, investigate and provide temporary/permanent resolution to incidents escalated with respect to Middleware/ Operating system/ database performance, capacity, resiliency , stability, replication and other key aspects
• Researching and recommending solution that best meet business needs and enterprise operational requirements
• Provide technical support to application development teams
• Evaluate release of Middleware, Operating system, Database components and its tools to ensure entire environment is complaint with no/minimal impact

Qualifications

• Knowledge in Kubernetes, Docker, Jenkins, DevOps, Other Container platforms
• Knowledge in Linux OS, Wintel OS, MariaDB or Any Other databases
• Knowledge in Networking (F5 GTM/LTM or any other SLB)
• 5 Years minimum professional experience and 3 Years minimum relevant experience
• Experience in banking or financial services institutions preferred
• Will need to work in shifts and in weekends
• Team player to work with multiple teams and teammates

Kindly take note of the following details for shift work

Transport is claimable - before 7am (for morning shift 6am to 3pm) , after 11pm (afternoon shift 2pm to 11pm)

Shift Timing

a. Morning shift 6am to 3pm

b. General shift 9am to 6pm.

c. Afternoon shift 2pm to 11pm

d. Night shift 10pm to 7am.

Need to support including night shift, weekends and public holidays

• Assistant the Project Manager in overseeing the project, planning and ensure work is carry out according to master program
• Liaise with the consultant on technical issue and doing coordination on site issues with sub con
• Work with project team and ability to resolve technical issues
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil) or equivalent.
• At least 2 year(s) of working experience in the related field is required for this position.
• Experience in building projects.

Job description:

• Coordinating with all related stakeholders
• Coordinating & supervising works & site activities based on systems & engineering design
• Making sure Mechanical & Electrical job is done based on micro-schedule and master programme
• Ensuring Mechanical & Electrical job complied to specifications, drawings, & authority codes
• Diploma in mechanical engineering or above
• Mechanical & Electrical Engineer experience in construction industry
• Familiar with AutoCAD & Microsoft office

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

Responsibilities

· Creating and maintaining database standards and policies.

· Supporting database design, creation, and testing activities

· Managing the database availability and performance, including incident and problem management.

· Administering database objects to achieve optimum utilization.

· Defining and implementing event triggers that will alert on potential database performance or integrity issues.

· Performing database housekeeping, such as tuning, indexing, etc.

· Monitoring usage, transaction volumes, response times, concurrency levels, etc.

· Implementing security measures and frameworks, while ensuring compliance. Identifying, reporting, and managing database security issues, audit trails, and forensics.

· Designing database backup, archiving, and storage strategy.

· Installing upgrades and patches for Graph (Neo4j) or SngleStore

Requirements
•Experience driving major production incidents and organise incident retrospective meetings
•Experience with Unix System, MariaDB or MySQL or SingleStore or MongoDB or Oracle
•Experience with high availability, high-scale, and performant systems
•Experience with python and Unix scripting

---------------------------

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Job Description

• Industry/ Organization Type: Manufacture of Electrical Equipment
• Position Title: Project Engineer
• Working Location: Nearest MRT – Woodlands North/Admiralty
• Working Hours: Monday – Friday, 8.30am – 6pm
• Salary Package: Up to $4,000 + VB
• Duration: Permanent

Key Responsibilities

• Attend meetings with clients and conduct site surveys to ensure all specifications and site conditions are accurately understood.
• Compile and update project progress reports, status updates, delivery schedules, and activities weekly, communicating these updates effectively to the Project Director and Project Controller.
• Respond promptly to both internal and external emails to maintain clear and effective communication.
• Maintain rigorous documentation of all project stages and ensure all designs submitted comply with client specifications and requirements.
• Continuously nurture and develop relationships with clients to ensure long-term cooperation and satisfaction.

APPLY NOW!!!

• Diploma in Electrical Engineering or an equivalent qualification with at least 1 year of experience
• Proficiency in AutoCAD and Microsoft Project is desirable
• Inexperienced candidates are welcome to apply as training will be provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70250 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Mandatory Skills Checkpoint Firewall

Preferred Skills Network - Routing and Switching, Firewall Administration and Operation

Brief Job Description

• Provide technical support, propose solutions, and project related queries for all Wired, Wireless network.

• Perform analysis, Plan, Coordinate and Implement all change requests on existing network equipment.

• Maintain records of system details (e.g. configuration, changes, problems, disaster recovery document) for network equipment.

• Manage firewalls like Checkpoint, Cisco FTD, Palo Alto and NEXUS switches; F5 Load balancer

- Gather business and/or application requirements on the infrastructure to plan, design, install, test & implement systems in accordance with the specifications & service level.

- Aligned or enhanced ITSM/ITIL methodologies in daily operations e.g. Change, Incident, problem, release management & CMDB.

- Monitor & measure the performance & availability of systems proactively; implement corrective actions identified to improve performance & service level availability.

- Respond promptly to incident, root cause analysis & provide temporary and/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties.

- Implement service continuity measures, i.e., backup/restore procedures & disaster recovery plan, to ensure continuous operation of the business.

- Create and maintain comprehensive documentation for all implemented networks.

- Assist in preparation of proposals and solution presentations.

We are the makers of possible
BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities.
Why Join Us?
A career at BD means learning and working alongside inspirational leaders and colleagues who are equally passionate and committed to fostering an inclusive, growth-centered, and rewarding culture. You will have the opportunity to help shape the trajectory of BD while leaving a legacy at the same time.
To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place.
Become a maker of possible with us!

Job Summary

The Injection Molding Process Engineer is a "hands-on" position that plans, directs, and coordinates manufacturing equipment and processes to produce high quality injection molded product. The Process Engineer is responsible for coordinating the molding efforts on new program launches, setting up and/or revising manufacturing processes and assisting the manufacturing operations in problem solving and continuous process improvements. While monitoring the effectiveness of processes this individual quantifies results, documents and presents findings to management and prepares reports.
This position also mentors and provides training to other injection molding personnel.

Job Description

1. Oversee molding production operations to meet requirements of Safety, Quality, Delivery, Cost and People (SQDCP).
2. Develop a robust Molding process by applying Scientific / Decoupled Molding techniques along with Design of Experiments (DOEs).
3. Implement and evaluate changes to existing processes designed to improve product quality, productivity and overall equipment efficiency (OEE).
4. Develop and maintain process documentation ensuring that processes and procedures are clearly stated and understandable for all employees. use Lean Manufacturing, Six Sigma, and other techniques to analyze process data to determine capabilities as well as improvement on OEE
5. Implement technical solutions including statistical methodology in continuous improvement to meet customer cost, quality, and delivery expectations.
6. Demonstrated ability to start-up, operate and shut down process related equipment. Must be able to work independently on new process development as well as troubleshooting current production issues and program robots and peripheral equipment
7. Work with equipment and material vendors to resolve machine and material issues.
8. Monitor and report issues with injection molds, make recommendations for refurbishment based on production factors such as cycles, process capability and tooling history.
9. Interact with customers to resolve issues and provide new project updates.
10. Facilitate and support facility and manufacturing safety, environmental, and ergonomics efforts.
11. Provide technical leadership and mentorship to process technicians, operators and other molding personnel.
12. Perform any other tasks as assigned.

Click on apply if this sounds like you!

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

To learn more about BD visit: https://bd.com/careers

Primary Work Location

SGP Tuas - Tuas Plant

Duties and responsibilities:

Planning and organizing construction projects, including developing project timelines, budgets, and resource plans.

Ensuring that all construction work is carried out in compliance with building codes, safety regulations, and other legal requirements.

Managing project teams, including architects, contractors, and other stakeholders, to ensure that projects are completed on time and within budget.

Monitoring project progress and making adjustments as necessary to ensure that projects are completed on time and within budget.

Collaborating with architects and other stakeholders to develop project plans and specifications.

Developing and implementing quality control procedures to ensure that construction work meets the required quality standards.

Providing technical guidance and support to project teams, including architects, contractors, and other stakeholders.

Maintaining accurate project records and documentation.

Develop and manage project schedules, budgets, and resources

Coordinate with architects, engineers, and contractors to ensure project success

Review and approve project plans, specifications, and contracts

Ensure compliance with building codes, safety regulations, and environmental requirements

Monitor project progress and make adjustments as necessary

Communicate project status to stakeholders and senior management

Manage project risks and identify opportunities for improvement

Provide technical support to project team members

Ensure quality control and quality assurance for all project deliverables

Lead project meetings and facilitate communication among team members

Assist in the development of cost estimates

Assist the project team with site safety documentation and coordination

Assist the project team with closeout of the project

Assist project accountant with monthly subcontractor billings and pay applications

Assist project manager with assigned tasks

Requirement:

Bachelor's degree in Civil Engineering or related field

Minimum of 5 years of experience in construction project management

Strong knowledge of construction materials, methods, and regulations

Excellent communication and leadership skills

Ability to manage multiple projects simultaneously

Proficiency in project management software and tools

Experience in managing large-scale construction projects

Ability to read and interpret blueprints and construction plans

Knowledge of budgeting and financial management

Experience in managing and supervising construction teams

Strong problem-solving and decision-making skills

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

• Manage, maintain, and support network, desktop & server infrastructure which includes setting up and maintenance of servers, storage equipment and conducting backup and data recovery activities
• Provide Server administration support and Database support for MSSQL DB.
• Providing operational support for systems (virtual/physical servers).
• Responsible for patch management (rollout of server patches), & hardening

Requirements

• Diploma in Computer Science/Information Technology or related qualifications
• At least 1 year of relevant working experience
• Hands on experience in VMWare, Storage, Windows 2008/2012/2016 Server
• Knowledge in Active Directory, DHCP, DNS, Group Policy
• Knowledge in troubleshooting skills

We are the makers of possible

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities.

Why Join Us?

A career at BD means learning and working alongside inspirational leaders and colleagues who are equally passionate and committed to fostering an inclusive, growth-centered, and rewarding culture. You will have the opportunity to help shape the trajectory of BD while leaving a legacy at the same time.

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place.

Become a maker of possible with us!

The R&D Packaging Engineer will be a part of the newly formed Sustainability Center of Excellence (COE) located in BD Singapore. The Sustainability COE is modeled after the Sustainable Medical Technology Institute (SMTI) and will have the same mandate as the SMTI. In this role, the Packaging Engineer will be responsible for execution of the broader R&D Sustainability strategy at BD. This individual will help integrate sustainability focus into programs for making changes to current products and to new product development programs in all 8 BD businesses. In particular, this individual will support Design for Sustainability efforts within BD’s R&D portfolio. This will require ability on the candidate’s part to work cross-functionally and with different stakeholders across geographies. Some travel may be required.

This is a critical role in the COE and this individual will drive activities focused on assessing and reducing the carbon footprint of BD products. The long-term vision is to have environmental sustainability become an integral part of the product and packaging development process, and the work done by him /her will be instrumental in enabling this outcome. He / she will strike a balance of fast-paced execution with thoroughness of approach, using iterative concept development informed by stakeholder feedback.

The R&D Packaging Engineer supports design, development, and validation of medical device packaging. The successful candidate will contribute to and/or lead a portfolio of packaging projects and ensure that best practices are employed and will have the opportunity to develop as an internal subject matter expert with respect to fundamental packaging materials and design. This includes test method development and alignment to existing and evolving global standards governing packaging.

This position will be accountable for supporting medium to high complexity projects, products, systems, or services within BD. Regular interaction and collaboration with R&D and project team members within each Business Unit is critical for the successful execution of responsibilities.

Job Description

• Work as part of the broader SMTI team to assess environmental impact of BD products, with focus on products in Greater Asia region.
• Work with R&D representatives to obtain feedback, make changes as necessary.
• Demonstrated understanding of translating customer needs into engineering requirements leading to specific packaging, and process specifications
• Collaboration with Manufacturing and cross-functional teams (including Manufacturing Technology, Quality, Marketing, Regulatory, Operations) across businesses to propose; assess the feasibility of; and implement packaging design, material, or process changes, including creative solutions to business or technical needs.
• Synthesize, develop, update, and optimize designs that meet requirements by understanding design space with design options and tradeoffs, managing critical parameters, leverage strong engineering fundamentals and tools and integrating manufacturing principles early in the development.
• Assess manufacturability of new packaging designs, development of packaging processes and changes to existing packaging designs and processes
• Support cost and supply continuity needs through continuous improvement, technology assessment, and innovation.
• Develop and execute packaging test methods that specify measurement equipment, test set-up, measurement systems analysis, and data analysis and align to business and regulatory requirements and needs.
• Write technical reports based on experimental investigations.
• Solve technical challenges drawing on a combination of experience, sound judgment, problem-solving skills, engineering first principles, and advanced engineering methods.
• Comply with all local, state, federal, and BD safety regulations, policies, and procedures.
• Comply with all local BD quality policies, procedures, and practices through consistent application of sound quality assurance principles.

Preferred Requirements

• Bachelor Degree in Mechanical/Packaging or related Engineering field is required.
• Minimum 2-3 years of packaging experience, preferably in medical device or food contact packaging.
• Experience/knowledge with CAD tools for packaging design
• Demonstrated understanding of different packaging solutions available to designers, including flexible and rigid packaging applications, familiarity with packaging materials and their limitations.
• Experience with forming, sealing process and tooling design and development for form/fill/seal, flow-wrap, pouch solutions.
• Experience with fabrication process to ensure manufacturability.
• Basic understanding of statistics and design of experiments.
• Knowledge of the following standards: ISO 13485, ISO 11607, and ISO 14971.

Click on apply if this sounds like you!

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

To learn more about BD visit: https://bd.com/careers

Connect Energy partner with a WaferFab manufacturing company to look for ASSISTANT TESTING ENGINEER to work for their Singapore office.

Responsibilities

• To perform wafer testing on wafer platform as planned.
• Conduct die testing on the die platform
• Carry out die sorting on the sorting platform
• Maintain and manage 6S standards within the Fab.

Requirements

• Diploma / Degree in Engineering
• Prior experience in Fab environments is preferred (6 inch / 8 inch fab)
• Able to read and write in English.
• Familiar with cleanrooms environment
• Proficient in using Windows operating systems and Office Software
• Willing to work in western part of Singapore

Job Title: Network Consulting Engineer (German SME)

Location: West

You will develop and implement individual network solutions and you excel when it comes to troubleshooting. Occasionally, you will support the sales department as technical pre-sales Subject Matter Expert. You will empower our customers in making informed decisions by developing workshops and trainings and conducting them onsite at their location.

Your Responsibilities

• Engage customers and vendors to deliver a fit-for-purpose and future-proof solution design that meet their business objectives, adhering to project delivery framework and vendors’ product lifecycle
• Develop and implement infrastructure projects adhering to project scope of work, timeline, budget, with quality. • Develop concise project documentation such as Low-Level Design, Migration/Implementation MoP, User Acceptance Test, User Guide documents
• Assist Sales or Solution Architect to provide technical specifications, Scope of Work, effort estimation in responding to customer’s request or RFP process
• Act as solution expert to support issue resolutions for project issue escalation that impacting deliverables, quality, or timeline
• Provide technical expertise to other team members, as well as with other avodaq teams in Singapore and globally
• Keep up to date with the latest technology products in network infrastructure, to provide high-quality support in current and future services

Your Profile

1. IP experience includes:

• Cisco Catalyst, Cisco Nexus, Cisco ASA, Firepower, IOS, and ISR Routers
• NGFW with Fortinet, Palo Alto, or Checkpoint Firewall o WAN & Routing (OSPF, EIGRP, IS-IS, BGP)
• Switching Technologies (STP, VLAN, VXLAN) o Network Authentication (ISE, 802.1x, Radius, Active Directory, Posture, Profiling)
• Network Design o QoS o Wireless Technologies (WLC, WLM, 802.11ac, WMM, PEAP, TLS, Site Survey)
• AI/ML delivered Assurance with Catalyst Center o Network performance measurement and monitoring such as Cisco Prime, Solarwinds, MRTG, PRTG

2. System experience includes:

• Linux/Unix o Microsoft Windows Active Directory, DNS, DHCP, and MS Server o Virtualization (VMWare, Hyper-V)
• Cloud experience with AWS, Azure or GCP will be an added advantage
• CCNA or CCNP certification

Preferred Qualifications

• 3 - 5 years’ experience in field or service engineering, specifically on network, wireless, and network security projects
• Fluency in English and Chinese (both written and spoken)
• Pronounced communicative and presentation skills
• Travel readiness

The Opportunity

The unique combination of consulting and projects work offers many possibilities to continuously enhance your professional knowledge. The position entails the possibility to become a Senior/Principal Consultant. To qualify for a higher position, you have to pass the CCIE examination.

Aventir Group Pte Ltd
EA License: 24C2542

Job Description

As an After-sales Technical Engineer, you will play a crucial role in ensuring customer satisfaction by managing all aspects of after-sales services. This includes coordinating with service engineers, preparing quotes for fault calls and repairs, and overseeing perventive maintenance contracts. You will assist with site surveys for minor projects, gather necessary information to aid the sales team in quoting, suggest site requirements for installations, power, and access, and manage distributors for projects won. Additionally, you will assist in preparing safety-related documents for preventive maintenance contracts (PMC) or minor projects. Your role is essential in maintaining strong relationship with end users and ensuring smooth operations for after-sales services.

Key Responsibilities

1. Manage Service Engineers' Whereabouts.

2. Quote for Fault calls & After Sales Repairs.

3. Prepare preventive Maintenance Contracts.

4. Assist with Site Surveys.

5. Promote Maintenance Contracts.

6. Assist in Quoting for Small Projects.

7. Manage Distributors for Project Wins.

8. Prepare Safety-Related Documents.

Requirements

1. Knowledge of Automatic Door Operator : A Solid understandign of automatic door operatos, their functionality, and maintenance requirements.

2. Possession of a Class Driving License

3. Knowledge of Ironmongery and Door Closers : Familiarity with various ironmongery products, including door closers, and their installation and maintenance.

4. Familiarity with Singapore Building Environment Regulations : A good understanding of the building and safety regulations in Singapore related to doors, door operators and associated hardware.

• To provide onsite technical and troubleshooting services covering below support activities within the required SLA time frame.
• Hardware support: Technical diagnosis and coordination with OEM vendors for repair of defective hardware for a variety of devices including desktops/laptops/workstations, mobile devices, tablets, meeting room equipment, printers etc.
• Software support: diagnosis and resolution of software functionality for both the operating system and standard desktop applications
• IMACD: physical installations, moves, adds, changes, and de-installs for a wide variety of supported hardware devices including desktops/laptops/workstations, mobile devices, tablets, meeting room equipment, printers and etc. and supported software
• Enhanced support for VIP users
• Coordinate with infrastructure teams to resolve issues with network, servers or other infrastructure devices or services that impact the normal work of end users
• Support hardware and software changes (e.g. hardware device change/refresh, system upgrade/migration, patch update, etc.) for end users
• Asset management support for end user devices by following defined processes
• Provide smart hand support for all kinds of hardware such as printers, servers, network devices, backup devices, meeting room equipment, scientific devices etc.
• Onsite support for events such as trade shows or special meetings
• Regular checks for IT Room devices and Meeting Room equipment when required
• Deployment services for large-scale efforts include asset auditing and discovery, project support, image integration, on-site installation, user self-installation, migration, and asset recovery governed with full project status and reporting

Job Requirements

• Diploma in Information Technology, Computer Engineering, Electronics or related field
• 1 to 2 years of desktop support experience
• 5 days work at Raffles Quay
• Salary up to $3500

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

We are seeking an experienced Senior DevOps Engineer to help automate and streamline our development, deployment, release and production processes at Spark.

Roles and Responsibilities

• Build and set up new development tools and infrastructure, in particular (but not limited to) CI/CD tools and processes
• Work on ways to automate and improve development and deployment/release processes for a large number of clients and components across different data centres
• Work with software developers to ensure that development follows established processes and works as intended
• Develop and maintain tools and processes to ensure the smooth running of production systems
• Improve visibility and response times to production problems

Educational Background and experience

• Degree educated in an Engineering or Computer Science related subject
• At least 5+ years of experience in DevOps or related activities
• Proven track record of building and supporting DevOps platforms for a large-scale enterprise

Required Skills and experiences

• Strong technical background, with hands-on experience in setting up and supporting CI/CD toolset (Gitlab, Maven, Gradle, Jenkins, Artifactory, SonarQube, Jira and Confluence)
• Excellent experience in developing automated deployment of applications and servers using Ansible or related technology
• Excellent knowledge of Linux / UNIX, bash or Perl or scripting skills such as Python, Groovy
• Good knowledge of Dockers, Kubernetes and etc. and experience of applying these to solve development and deployment issues
• Working knowledge of SQL databases, queries and stored procedures
• Passionate about automation and can bring in new ideas on how automation can be used to improve software delivery and client experience
• People leadership and mentoring experience
• Excellent communication, collaboration, reporting, analytical and problem-solving skills

Hands on Experience in Cloud is must

Good knowledge and Work Experience in Networking & Security is must.
Managing of Security devices like Checkpoint and Palo Alto Firewalls.
Knowledge on data center network including Cisco Nexus switches.
Knowledge on load balancer like F5 BIG IP (LTM and GTM).
Managing of Servers; AAA, SNMP, Syslog, NTP, DHCP, FTP, DNS, AAA, DNS and DHCP
Managing of Cisco Routers ISR/ASR Series and Switches Catalyst 6500,4500,3750,2960 & 3560 Series
Significant exposure to 802.1x, TACACS+ and Radius.
Experience in managing Wireless Environment with WLAN Controller.
Responsible for day to day Operations and administration on data center network & security infrastructure.
Perform Installation, configuration and maintenance of network equipment and network operating System
Responsible for security, particularly trouble shooting and/or debugging network related problems.
Good Knowledge troubleshooting, problem identification, problem resolution and/or resolution recommendation activities to  first- and second-level teams.
Perform maintenance of the network authorization infrastructure as well as network backup system.
Maintains inventory of equipment and parts as well as documentation of vendor activates.
Develop and documents systems standards for computer and network device.
Recommend and schedule repairs to the LAN/WAN and ensure timely user notification of maintenance requirements and effects on system availability.
Strong networking background and experience, with the ability to do troubleshooting of both access control and network related problems.
Troubleshoot networks, system, and applications to identify and correct malfunction; other operational difficulties and provide telephone and internal users.
Preferably with one of the given Certification - CCNA/CCNP or a Firewall Certifications.
Ready to work in shifts

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechanical Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide guidance and technical assistance to sales and service teams.
• Offer customized solutions for technical issues and sales inquiries.
• Assist the service team with equipment repair and maintenance.
• Develop procedures for equipment testing, maintenance, and operation.
• Coordinate in-house product assembly and validation testing and produce test reports.
• Conduct technical presentations and product training for clients.
• Create and maintain drawings, bills of materials, and design documentation.
• Discuss technical requirements with clients on-site and coordinate site work.
• Prepare method statements and reports for site work.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience in Mechanical Engineering, preferably in O&G industries
• Prior experience in flange management is advantageous
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69140 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Validation Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $6,000 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Assist Quality and Validation Manager Asia to complete the tasks on time with good quality.
• Responsible for the successful execution of the Validation functions for customer projects, as required – Quality, Cost, and Time.
• Responsible for driving and supporting the project team for projects where validation is required and ensuring execution complies with company's standards.
• Provide training on qualification activities.
• Responsible for maintaining qualification documentation standards and procedures.
• Create and maintain qualification/validation documentation from the design phase of projects for mechanical, software, and hardware parts.
• Lead the qualification/validation activities of projects (risk analysis, protocol drafting, and test execution during FAT/SAT) internally and at our partners' sites (approximately 20% of the time on travel throughout the year).
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 2 years of working experience in quality or validation of automated systems (mechanical, software, hardware) or equivalent
• Prior work experience in control systems design is advantageous
• Excellent understanding of assembly, test & debug procedures

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69403 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781