NOTE: We are looking specifically for candidates who can write code in C/C++ or Python and have prior experience with robots. There is no strict minimum qualification, but you must have experience in writing code and can read algorithms. If you have a background in R&D, robotics or algorithm design, this role will likely be a good fit for you. If your skillset is limited to the mechanical design of robots, this role is wrong for you. Your familiarity with ROS and ability to write good code WILL BE exhaustively assessed during the interview rounds.

About MyrLabs

MyrLabs is an A*STAR spin-off that creates cutting edge hardware and algorithms. The MyrLabs team consists of driven and multi-disciplinary engineers dedicated to bringing game-breaking solutions for our partners by innovating at the PCB, firmware, and software levels. We work on problems that academia fears to, cannot, or will not address. These are problems that are difficult and require multi-disciplinary efforts. Our approach focuses on the use of non-mainstream techniques to spark creativity and to solve problems in ways that are not seen before.

Job Brief

We are increasing our team size of Robot Software Engineers. This is a position for a research-focused role towards autonomous service robots for indoor and outdoor environments, specifically in the areas of mapping, multi robot orchestration, and control. You would work alongside other researchers to testbed and evaluate new hardware devices and algorithmic capabilities. The work that you do will contribute to new approaches for robot navigation, perception, and instrumentation.

Responsibilities

1. Work with the research team to develop, evaluate, and testbed new robot capabilities
2. Work with other robot engineers to develop, collect data, debug and trial robots in various use cases and environments
3. Participate in the continued development across our product lines

Critical Skills

• Demonstratable expertise with C/C++ and/or Python
• Demonstratable experience with ROS
• Demonstratable experience in robot navigation, perception, or instrumentation

Nice to Haves

• Demonstratable experience working with researchers, participation in research efforts, OR relevant publication in robotics
• Familiarity with combinatorics or metaheuristics algorithms
• Familiarity with parallel, concurrent, or distributed computing

Stance on Skills-based Hiring

MyrLabs has pledged support for the skills-based hiring movement; candidates are assessed based on a ‘skills first’ approach over qualifications. Candidates from ITE or Polytechnics are welcome to apply for the position.

After application, please send your resume, MBTI profile, and portfolio of previous work to [email protected]

You can do a free MBTI test at: https://www.16personalities.com/free-personality-test

Job Description:

• Provide assistance, knowledge and user support in all aspects of IT to ensure the company's business gets maximum benefit from IT systems

• Perform system changes and developments to any of company's systems and applications to agreed standards and timescales.

• Provide basic hardware/software configuration, fault finding and problem resolution.

• Conduct routine maintenance, monitoring and administration on IT systems, hardware, network and business applications.

• Provide video and audio-conferencing system support to end users

• Supporting Group Digital projects/initiatives

• Liaise with external support organisations to ensure their service meets company's business requirements e.g. Service Desk, Telecoms provision and support.

• Answer technical queries and meet operational service levels

• Ensure own work satisfies quality requirements and is documented to departmental standards with all associated databases updated.

• Work as a team member and share knowledge with colleagues.

• Work to agreed personal development plans to broaden the skill range available for all systems and application areas.

• Generate KPI’s and reports to share details on the IT service and IT activities.

• Provide user training, hints and tips and other user assistance as required on systems and applications.

• Provide purchasing advice to and purchase IT equipment on behalf of the business, place orders and manage the stock of IT equipment and spares.

• Be available to support the business during ‘out of core hour’ working time.

• Proactively supports and operates solutions and takes measures to enhance processes and improve service delivery.

• Manage incidents and requests from customers.

Job requirements

• A sound range of IT skills, which need to be kept up to date in line with IT developments in the business.

• Have a basic understanding of the desktop and LAN\WiFi\WAN technical domains, involving familiarity with a wide range of environmental components and support tools.

• Good knowledge of computer hardware, Windows and Mac operating systems, and software applications

• Good understanding of mobile / smart devices, Android and iOS

• Good working knowledge of video conferencing platforms, Zoom, BlueJeans, Skype for Business

• Good working knowledge and experience in managing Office365 and Azure

• To demonstrate the ability to acquire and apply new technical knowledge, be able to work without close supervision.

• Work to high professional and personal standards in a disciplined manner to agreed standards and procedures and maintain appropriate databases and documentation

• The ability to work within a complex technical environment and able to perform tasks and resolve problems on a variety of systems and applications

• The ability to work within a team and be willing to share learning and to learn from others.

• Possession of good verbal and written communication skills.

• Maintain good personal skills and an ability to cope with potential conflict.

QUALIFICATIONS AND EXPERIENCE

• IT / engineer related diploma from polytechnic or degree from university

• Microsoft Certified Systems Engineer (MCSE) or a COMPTIA certification would be beneficial.

• ITIL Foundation V3 would be beneficial

• Thoroughness for investigating and monitoring systems and tenacity for resolving the root cause of problems.

• Familiarity with professional development standards

• Thorough knowledge of IT products and the marketplace

• Maintaining a good network of contacts within IT and within the business

• It is beneficial to have experience in the following technical support areas – Windows operating systems, LAN / WiFi / WAN, Office 365, Office products Outlook, Internet Web Browsers, Skype, Zoom, BlueJeans messaging and conferencing.

PREFERRED SKILLS

• Strong interpersonal, communication and presentation skills.

• Must be analytical, self-driven and proactive in keeping up with new technologies and attention to details.

• Independent worker with initiatives, resourceful, positive attitude, friendly deposition, good team player and able to deliver results within tight deadlines.

• Experience of project management tools and techniques to assist in major Information Technology implementation projects.

• Some on-call or after hours work may be required

Responsibilities:

Working with the development team, you will be responsible for the design development, documentation, testing and delivery of the software solution for an Automatic Fare Collection (AFC) system.

The activities required to be performed shall include the following:

• Requirements gathering;
• Design, development, and maintenance of the software;
• Preparation and submission of deliverables throughout the software development lifecycles such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the standard adopted by the Authority;
• Assist the Authority with day-to-day application support issues; and
• Liaise with users on the requirement, design and testing issues.

Qualifications & Requirements:

• Recognised degree in Computer Science, IT or engineering with at least 5 years’ relevant experience in software development;
• Gone through at least one full software development lifecycle (SDLC) with experience in producing SDLC documentations;
• Extensive experience in analysing requirements, designing, development and delivering complex enterprise applications in Java/JEE, web programming on UNIX / LINUX and Windows environment;
• Proficiency with database programming such as SQL and DAO, and relevant experience with MySQL, PostgreSQL
• Experience in Spring Framework and Spring Boot;
• Experience in Software Modernization, Containerization, Microservices;
• Experience in Agile development methodology and continuous integration;
• Experience in writing Requirements Specification, Use Cases, Design Documentation, object-orientedsoftware design and UML modelling;
• Proficiency in AWS ECS and Docker containerization, with a solid understanding of DevOps principles and best practices
• Strong analytical and problem-solving skills; and
• Good written and verbal communication skills in English.
• Self-motivated and a good team player.
• Added advantage if candidate is familiar with one or more of the following technologies:

1. Experience in Message Queues and/or Solace;
2. Experience in Cloud Computing, Kubernetes & Dockers, AWS Services like Amazon ECS Fargate, AWS RDS & Lambda;
3. Experience in Automatic Fare Collection (AFC) system;
4. Experience in Microsoft Active Directory
5. Experience in HTML / CSS / JavaScript / JSON
6. Experience in Secure Communications (SFTP, HTTPS, etc.)
7. Experience in Angular or equivalent
8. Experience in Java Unit Tests frameworks

Mon to Fri 8.30am - 5.30pm

This position will be based in Singapore , reporting to procurement manager .

Expected to use their specialized knowledge to maintain an efficient procurement system to supply cost effective materials and services to support the company’s operations.

Job Responsibilities

Procurement Operations and Data Maintenance

• Support the procurement end to end function and other relevant departments and communicate any supply problems which may impact on business operations. Act as an interface between suppliers and relevant departments on purchasing processes and new projects and activities.

• Maintain system integrity of supplier’s info in the ERP system, such as items suppliers connect, purchasing agreements and supplier basic data like MOQ, order multiple, purchasers responsible and supplier maintenance.

Sourcing

• Conduct business review meetings with key stakeholders to assess risk, review future strategies, and identify potential cost down, new programs and improvement opportunities or mitigate the risk.

• Create and review opportunities on alternative materials and or suppliers to meet the business unit objectives in procurement activities and deliver best values and business savings.

• Collaborating with quality team to understand company/s needs as well as work with our existing/new suppliers to determine company strategic alignment.

SNOP

• Understand the trend of raw material / feedstock related, update the information to commercial team, provide analysis on costs, new and cost savings activities. Develop strong partnership with suppliers.

• Monitor market trends, competitor strategies and market suppliers, provide analysis on costs, new and existing and review cost to achieve savings. Establish r/s with suppliers to leverage the needs in term on tight supply situation as well as to be ahead of the market requirement.

• Contribute and communicate the impact on Procurement activities to new business initiatives and projects. Involve in Global procurement project activities.

Vendor Management

• Assess and evaluate supplier’s performance reviews, compiling data relating to supplier performance to enable evaluation.

• To audit supplier supply capability and quality standard when required. Maintain proper documentation in accordance with ISO procedures.

Job Requirements:

• Degree Holders with at least 5 years of working experience in end to end procurement related field in manufacturing environment

• At least 5 year(s) of working experience in related field preferably in petrochemical or polymers related industry

• Possess strong sourcing and negotiation skills.

• Accountable team worker, proactive, problem solving and analytical abilities.

• Strong interpersonal and communication skills to work productively and collaboratively with multi-functional teams to achieve business goals.

• Candidates with good experience in petrochemical raw material commodity price trend analysis will be at advantage

• Familiar with SnOP process would be added point

• This position required to manage overseas vendor from China

Job Description:

MAINTENANCE & ENGINEERING

• Plan and carry out preventive maintenance throughout the hotel to ensure standards are maintained for guest comfort.
• Prioritise and carry out maintenance as requested by Departments on a daily basis to ensure the smooth running of all hotel departments.
• Motivate and develop the Engineering team to reach to their fullest potential.
• Ensure guest-centric approach to works, schedules with priority placed on services which impact guest satisfaction.
• Liaise and work closely with the MCST and FCC to ensure smoother operations and consistency in approach.
• Record meter readings and liaise with the Executive Assistant Manager regarding options to improve energy management and conservation.
• As a Fire Safety Manager, be responsible for the testing of fire alarms, emergency lighting etc. on a routine basis as required by local Council and Fire Service.
• Liaise with the Body Corporate with regards to maintenance issues and re-charge labour and materials at agreed rates
• Ensure compliance with all legislation, including Health and Safety and Environmental.
• Liaise with the Executive Assistant Manager regarding use of contractors within the Hotel, controlling expenditure and ensuring work is to the standard required by the Company and manufacture specifications.
• Ensure the cost effective and hygienic removal of rubbish from the hotel areas and monitor to ensure areas are clear and free of offensive odour.
• Be available to carry out emergency maintenance work outside of normal working hours, as required for: full power failure, evacuation fire system re-set and / or failure of mechanical systems.
• Maintain records of repair work and daily checks as required by local Council, Government and Manufacturer specifications.
• Liaise closely with all departments regarding ‘down’ rooms to expedite a quick turn around and return to inventory.
• Ensure the external areas of the hotel are neat and tidy and maintained in line with Company brand standards.
• Research, recommend and liaise with the Executive Assistant Manager regarding procedures to improve the overall efficiency of the department and to carry out project work/prepare reports as requested by the Executive Assistant Manager.
• Support the co-ordination of safety and security/risk management programs via third party providers
• Work with the operational Department Heads team to ensure InterREACT tracking and compliance
• Ensure health, safety and welfare of all ambassadors is provided for through implementation of integrated occupational safety and health program.
• Give guidance to the effective operation of the WHS Committee.
• Ensure all ambassadors are competent in the safe and effective use of equipment and chemicals in accordance with the manufacturer’s instructions.
• Attend and actively participate in daily meetings respecting the confidentiality of issues which may be discussed formally or informally.
• Prepare monthly Engineering reports, commenting on key performance indicators and action taken to keep on target.
• Adherence to Emergency Communication procedures ensuring that enquiries from the media are only responded to by the nominated spokesperson.
• Strive to implement the AccorHotels Vision and demonstrate active use of AccorHotels Values.
• Any other reasonable request within your range of competence as required by Management.

Qualifications:

• 5 years of experience in the relevant field and 3 years of experience in a managerial capacity.
• Passionate, energetic and self‐motivated individual who can deliver exceptional performance.
• Strong interpersonal and communication skills.
• Able to work well with teams and demonstrates excellent leadership.

Objectives of this position:

The objective of the position is to manage the extract/transform/load processes ensuring the data availability.

Responsibilities:

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

•Design, create, modify extract/transform/load (ETL) pipelines in Azure Data Fac-tory ensuring efficient data flow from source to destination.

•Ensure data accuracy and data integrity throughout the ETL processes via data validation, cleansing, deduplication, and error handling to ensure reliable and us-able data being ingested.

•Monitor the ETL processes and optimize ETL pipelines for speed and efficiency, addressing bottlenecks, and ensuring the ETL system can handle the volume, ve-locity, and variety of data.

•Participate in data modeling, designing of the data structures and schema in the data warehouse to optimize query performance and align with business needs.

•Work closely with different departments and IT team to under-stand data requirements and deliver the data infrastructure that supports business goals.

•Provide technical support for ETL systems, troubleshooting issues and ensuring the continuous availability and reliability of data flows.

•Ensure proper documentation of data sources, ETL processes and data architecture.

Requirements:

3 to 5 years of data engineering in Snowflake

3 to 5 years in upstream / downstream Retail industry and/or Supply Chain / Manufacturing domain

Sound Understanding of data quality principles and data governance best practices

Proficiency in data analytics languages like Python, Java, Scala, etc.

Knowledge of big data technologies like Hadoop, Spark and distributed computing frameworks to manage large scale data processing.

Proficient in using version control systems like Git for managing code and configurations.

SnowPro Core Certification and SnowPro Advanced Certification will be advantage

Job Responsibilities

• Create firmware specifications based on design rules, internal processes, and product/system requirements.
• Design and develop embedded firmware in accordance with established design rules, processes, and specific customer/product requirements.
• Development and implementation of signal processing algorithms in embedded firmware, with cross functionality team.
• Create and conduct review on test methodologies, validate design performance to specifications, debug embedded software, and document final design.
• Support production implementation in the embedded software perspective
• Collaborate with cross functional teams to sustain product lifecycle including customer complaints, failure analysis, etc.
• Liaising with Headquarter on the technical support and technology transfer.
  Verify regulatory compliance with support from head office.

Job Requirements

• Master / Bachelor in Electronic / Computer Engineering or equivalent
• Minimum 3 years relevant experience in embedded software design and development
• Strong knowledge and direct experience with C & C++ programming languages
• Strong knowledge on digital electronics hardware including I2C, SPI, UART, PWM, ADC, USB, etc.
• Experience in designing, coding, debugging and validating on ARM Cortex microcontrollers are preferred.
• Knowledge on Python & Matlab would be advantage.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to [email protected]or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Lee Jia Chian (Jayleen)
EA Personnel Reg No: R24124361

Job Description:

• To ensure that the Engineering designs are in compliance with project specific requirements, and in-line with the Engineering Standard Practice, Company’s ISO procedures, national and international engineering norms, codes, and safety requirements.
• Generate block diagrams, bill of materials, functional design specifications, design calculation, wiring drawings, and all other documents and drawings as required by project and necessary to ensure equipment can be procured, integrated, tested, installed and handed over to the customer on schedule.
• Ensure equipment supplied for a specific project is technically compliant with relevant specification requirements, project technical standards, correctly configured and completed.
• Ensures equipment specified and designed can be successfully integrated with other equipment with which it has to interface to.
• Produces test procedure documentation appropriate to project commissioning.
• Provides technical support to system assembly and integration team.
• Perform other ad-hoc duties as assigned by the Projects & Retrofit Manager / Assistant Manager

Requirements:

• Knowledge in AutoCAD
• MS Office
• Diploma / Bachelor / College Degree equivalent certifications in IT / Engineering with at least 2 years of experience in the field or in a related area

HOW TO APPLY:

Interested applicants, kindly click on “Apply Now” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Location: North East

Monday - Friday, 8.45-5.30 pm

Job Description:

· Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.

· Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.

· Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.

· Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems.

· Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.

· Manage the procurement of spare parts from Supplier

Job Requirements:

· Diploma/ITE in Electrical Engineering or a related field.

· Relevant experience in technical servicing roles.

· Hands-on experience in customer service with the ability to work independently on-site.

· 1 to 2 years of field service experience in a related industry.

Interested applicants, kindly send your UPDATED resume in MS WORD format to ref9 at trustrecruit.com.sg or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Xue Fen

EA Personnel Reg No: R1653801

Our client is a renowned security solution provider delivering turn-key solutions. They have carved a reputation for themselves and are committed to developing their people with continual career development training.

They seek an Engineer (DC Inventory & Asset Technician) to join their growing team.

Responsibilities:

• Maintain accurate documentation of incoming and outgoing deliveries. 
• Perform regular audits of datacentre equipment to ensure inventory controls are met.
• Movement of equipment using pallet jacks or other assisted lifting equipment. 
• Work within a ticket-based environment. 
• Perform destruction of data-bearing devices (ex. hard drives, solid-state drives, etc.). 
• Perform material movement, including shipping/receiving and inventory management. 
• Perform shift-based tactical management tasks such as prioritising ticketing queues, resolving escalations, and clearing blocking issues to enable continued delivery of Inventory and Asset activities in accordance with Microsoft’s internal policies and service level agreements. 
• Flexibility to work non-standard business hours that may include weekends and/or holidays.

Requirements:

• Six (6) months of experience supporting Inventory Control, Logistics, or Warehouse Management. 
• Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance. 
• Able to communicate effectively. 
• Proficient in written and oral English communication to support regional and global teams. 
• Desire to learn, grow, and develop new technical skills

Job Description:

• Must be a Diploma/Bachelor's Degree holder.

• Hands-on implementation experience in building full-stack Restful web Applications.

• Experience in the following domain area/Technology/Programming languages

• Communication/Data Protocols: Modbus, OPC UA/AD, IEC 101/104, TCP/IP, SFTP, MQTT, AMQP

• Programming languages: JavaScript, Python, C/C++, SQL

• Experience in Linux, Docker, PostgreSQL, And Firewall management

• Experience in Code Management and Deployment

• Certified in Microsoft Technologies will be an added advantage

• Knowledge in Azure Devops, Azure IOT and Azure sphere will be an added advantage.

Roles and Responsibilities:

• The candidate will be responsible for designing and implementing data acquisition solutions and systems that meet the requirements of our clients.

• The successful candidate will be expected to have strong problem-solving skills and be able to troubleshoot and debug complex issues.

• The candidate will also be responsible for developing and maintaining documentation for solutions, including design specifications and test plans.

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

Job Description:

• To ensure that the Engineering designs are in compliance with project specific requirements, and in-line with the Engineering Standard Practice, Company’s ISO procedures, national and international engineering norms, codes, and safety requirements.
• Generate block diagrams, bill of materials, functional design specifications, design calculation, wiring drawings, and all other documents and drawings as required by project and necessary to ensure equipment can be procured, integrated, tested, installed and handed over to the customer on schedule.
• Ensure equipment supplied for a specific project is technically compliant with relevant specification requirements, project technical standards, correctly configured and completed.
• Ensures equipment specified and designed can be successfully integrated with other equipment with which it has to interface to.
• Produces test procedure documentation appropriate to project commissioning.
• Provides technical support to system assembly and integration team.
• Perform other ad-hoc duties as assigned by the Projects & Retrofit Manager / Assistant Manager

Requirements:

• Knowledge in AutoCAD
• MS Office
• Diploma / Bachelor / College Degree equivalent certifications in IT / Engineering with at least 2 years of experience in the field or in a related area

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Ding Xin Er
EA Personnel Reg No: R22106669

Who is Tenable?
Tenable® is the Exposure Management company. 40,000 organizations around the globe rely on Tenable to understand and reduce cyber risk. Our global employees support 60 percent of the Fortune 500, 40 percent of the Global 2000, and large government agencies. Come be part of our journey!
What makes Tenable such a great place to work?
Ask a member of our team and they’ll answer, “Our people!” We work together to build and innovate best-in-class cybersecurity solutions for our customers; all while creating a culture of belonging, respect, and excellence where we can be our best selves. When you’re part of our #OneTenable team, you can expect to partner with some of the most talented and passionate people in the industry, and have the support and resources you need to do work that truly matters. We deliver results that exceed expectations and we win together!
Your Role:
The Technical Support Engineer provides consistent, world-class support for Tenable cybersecurity products (Tenable Holdings Inc, NASDAQ: TENB). In serving as the primary liaison between the company and customer, the TSE resolves real-world technical challenges by supporting cutting-edge vulnerability assessment and compliance auditing software across complex, multi-faceted customer deployments.
Our TSEs possess excellent knowledge of security assessment, vulnerability management and compliance auditing capabilities along with the drive to rapidly learn the newest technologies. Impeccable communication skills (written and verbal) focused on sustaining market leading customer loyalty is a key requirement for this position. The TSE is a hands-on customer-facing role that provides support for Tenable’s entire product suite; including Nessus Professional, Tenable.io, Tenable.sc, Tenable.ot, Tenable.ad, Log Correlation Engine, Container Security, Nessus Network Monitor and Web Application Scanning. Questions come from a wide variety of sources including customers who need help deploying their first Nessus scanner, to customers who want to perform in-depth log correlation and real-time vulnerability analysis.
Your Opportunity:

• Work closely and build relationships with the rest of the Tenable team, including Sales, Customer Advocacy, Research & Development, and Operations
• Serves as the primary technical liaison between the customer and Tenable internal groups (Product Management, R&D, etc) for technical issues
• Analyse and clarify customer technical inquiries
• Analysing vulnerability scan results, system audits, and log events
• Recreating customer software issues in a lab environment
• Ensure customer feedback is properly channeled into Product Management and Research & Development
• Maintaining in-depth knowledge of Tenable products and information security best-practices
• Create and publish solution knowledge for re-use by customers and Tenable employees
• Opportunities for career advancement within Technical Support as well as other organizations within Tenable

What you'll need:

• Bachelor’s degree in IT or Computer Science (or equivalent experience)
• Experience required 4 to 12 years of
  hands-on
  proven experience in field engineering or technical support in Support/Professional Services/Technical Account Manager
• 4+ Years of Customer Support with a hi-tech company
• A passion for making customers successful
• Experience working with Enterprise customers around the world
• Excellent verbal and written communication skills in English is must. Mandarin language skills look upon favourably.
• Strong knowledge/experience in: Linux and Windows Server Administration and Configuration
• Windows Active Directory
• Network administration, Firewall Configuration, and strong knowledge of TCP/IP
• Extensive experience with diagnostic tools such as Wireshark, etc to analyze packet captures (pcaps)
• Database technologies and SQL knowledge (Oracle, MySQL, MSSQL, etc.)
• Log File Analysis Experience
• Working Knowledge of Firewalls
• CVE's and Security Bulletins
• Either professionally or in an academic setting, using Nessus and/or other vulnerability management and cybersecurity tools
• Monthly availability to work weekends (8am-4:30pm) and Holidays is also required

If you’ve reached this point, and you’re still not sure if you should apply…..Just do it! We’re human and we don’t fit a perfect mold. Having diverse backgrounds, experiences and perspectives, that’s a good thing! If you’re coming from outside of the cyber industry - great! If you’re looking to try something new - awesome! All we ask is you bring passion to all that you do, crave creativity and innovation, and embrace the hard work of gaining new skills and accepting big challenges.
We’re committed to promoting Equal Employment Opportunity (EEO) at Tenable - through all equal employment opportunity laws and regulations at the international, federal, state and local levels.

Mon to Fri: 9am to 5:30pm

Objective:

We are looking for a Field Application Engineer to drive new projects and business pipelines for FY24 growth.

Responsibilities:

• Responsible for pre & post sales requirements of Company’s Power Quality products (preparing technical documents & commercial proposals)

• Provides technical support to distributors and key account customer for troubleshooting, on-site testing and commissioning

• Provides trainings to distributors and customers to enhance their capabilities

• Responsible for design-in (spec-in) of company’s products with the distributor in the appointed territory and market segments, achieve yearly design-in targets

• Lookout for opportunities to cross out competitor part

• Coordinate PQ Application and On-site Measurement Services in line with the company strategy

• Maintains good relationship with both end-users, local distributors, external test laboratories and build customer loyalty through field visits

• Maintenance of existing customers base and achieve development of new potential customers.

• Effective use of CRM/CAS system to record key activities, including customer visit/call reports and opportunities

• Able to communicate and work well with internal departments.

• Any other responsibilities as assigned by the Strategic Account Manager or/and Sales Manager

Job Requirements:

• Possess fundamental PQ Harmonic knowledge and application.

• Basic knowledge of EMC / EMI compliance is a plus

• Bachelor’s degree or equivalent in Electrical/Electronics/Mechatronics Engineering or other relevant majors

• Prefer minimum 3 years technical experience in the field of industrial products

• Able to operate common test equipment like voltage meter, clamp meter, oscilloscope, analyzer, etc.

• Good interpersonal and communication skills

• Well-versed in basic MS Office tools (eg. Word, Excel) and SAP (preferred)

• Interpersonal savvy

• Good follow up and consultative approach attitude

• Able to work independently and resourceful

What we offer:

• Attractive remuneration and incentive package

• Annual leave, medical welfare and insurance

• Provide opportunities for career advancement within the company

Mon to Fri - 8am to 5.30pm

Responsibilities:

- Responsible for daily basis service work and handling new installation projects and testing commissions for air-cooled and water-cooled chiller.

- Routine servicing of Commercial Chillers (Air-cooled & Water-cooled chillers) onsite.

- Routine duties includes maintenance, troubleshooting and repair to commercial chillers, AHU, FCU, VRV CRAC, VRV Systems, including tear down and rebuild (overhauling).

- Able to read specifications and drawings by contractors.

- Inspecting and testing systems to verify system compliance with plans and specifications and to detect/locate malfunctions.

- Organise and keep up with records and report all faults, deficiencies and other unusual occurrences, as well as the time and materials expended on work orders.

- Responsible for adjusting system controls to settings recommended by manufacturer to balance systems handling for all types of refrigerant.

Requirements:

- Diploma/Degree in Mechanical Engineering

- Minimum 2 years of technical experience with knowledge in air-conditioning, Chiller, ACMV or HVAC systems

- Resourceful with good analytical and interpersonal skills

- Strong communication skills

- Good team player with ability to lead and multi-task

- Possess Class 3 driving license will be an added advantage

Mon to Fri 9am to 6pm

Summary:

• Provide support and manage project

• Follow up with clients in timely manner

• Assist sales team with site survey & system design

• Provide onsite support to diagnose and rectify technical issue

• Outline budget based on requirements and tracking costs to deliver project on budget.

• Prepare detailed project plan to schedule key project milestones, workstreams & activities.

• Manage delivery of the project according to project plan.

• Track project and providing regular reports on project status to project team and key stakeholders.

• Manage and adjust for any changes in project scope, schedule and/or budget.

• Managing the relationship and communication with the client and all stakeholders, ensuring the project is delivered to their satisfaction.

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science / Information Technology

• At least 1 year experience in handling software projects

• Good understanding of programming , new technology trends / applications etc and with .basic cybersecurity & network knowledge.

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Good working attitude and self-motivated

Job Responsibilities:

Gather software requirements and design solutions for modules and small software systems

Develop and support software including applications, database integration, interfaces and new functionality enhancements.

Coordinate cross-functionally to ensure projects meet business objectives and compliance standards.

Write both internal and external technical documentation

Deploy, install, and configure hardware and software systems

Work with team members in customer support, field test and deployment

Perform bug fixing and improvement of current application framework

Requirements:

Bachelor Degree in Computer Science & Engineering, Electrical & Electronics Engineering, Information Technology, or equivalent

2-4 years of in-depth knowledge and experience in front-end and backend development

Ability to solve complex development problems and produce high-quality code while pushing the technical boundaries.

Proficiency in one or more programming languages; we use Python, Javascript and TypeScript.

Knowledge in frontend frameworks such as React, Next.JS, FastAPI, REST API or similar frameworks.

Experience with Docker/Kubernetes, DevOps, CI/CD, Github

Experience with Linux operating system (Ubuntu, RHEL, etc.)

Experience working on Agile projects and Agile methodology in general

Excellent problem solving, communications, and teamwork skills

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

Fresh grads who can start by January or February 2025 are encouraged to apply!

Job Responsibilities:

· Participate in designing solutions that meet functional requirements

· Develop end-to-end specifications for solution components.

· Perform testing and implementation of the solution.

· Participate in impact analysis of encountered issues.

· Generate relevant documentations, reports etc.

· Contribute to continuous improvement of software development best practices in the areas of coding tools, languages and APIs, as well as software design and development processes.

· Participate UX activities such as

o Conduct user research/interviews,

o Develop user stories, storyboards to articulate current and future concepts

o Create wireframes, detailed visual mock ups and interactive prototypes

o Create style guides and digital assets for production

Job Requirements:

· Degree in Computing/ Computer Science/ Computer Engineering/ Info Systems / EEE or equivalent

· Familiar to software development lifecycle processes.

· Strong programming skills and verifiable mastery of at least one of the following languages: Java, JavaScript, Python, C#, C++

· Proficiency in Web Technologies such as HTML, CSS.

· Good team player with strong communication and interpersonal skills.

· Good analytical and creative problem-solving skills

· Must be willing to pick up and learn new technologies

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Responsibilities:

l Plan, execute, monitor and assist in the installation and ongoing support and maintenance of all hardware, software and networks in project delivery

l Conduct root cause analysis & implement pro-active measures

l Responsible for supporting operational systems satisfying contractual Service Level Agreement

l Perform and manage routine preventive maintenance and operational activities promptly and effectively

l Perform troubleshooting and fault rectification

l Provide up-to-date project documentation and reports

l Diagnose and rectify technical issues

l Perform standby duties if required

Requirements:

l Familiar or willing to learn Windows server OS, Unix/Linux OS & virtualization environment (VMware, HyperV etc.)

l Willing to troubleshoot and do hands on technical work

l Pro-active, dynamic and with good analytical/conceptual thinking

l Able to work independently as well as in a team and good interpersonal skills

l Willing to learn VPN, firewall appliances, routers, switches, hardware like servers, storage area networks (SAN), network-attached storage (NAS) devices

l Willing to pick up skills in IT Infra services like Active Directory, DHCP, DNS, Exchange/Mail Service, Database, Web or App Server etc.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Electronic system design team

Job Description:

• Perform C/C++ software programming in embedded Linux system.
• Manage software evaluation and test.
• Write test plans and reports.
• Write driver for devices under embedded Linux OS
• To work on network / communication software coding.
• Software integration and report.
• Report to software chief engineer.

Requirements:

• Good skill in C/C++ programming
• Knowledge in Linux OS , Python, Verilog, Synopsys
• Knowledge in Embedded system and Network communication
• Able to co-operate with system designer and hardware engineer.
• 1-2 years minimal experiences in Electronics Software Design

HOW TO APPLY:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

*Free Lunch Provided!

*Transport Allowance!

*Entry Level / No experience welcomed!

Job Descriptions :

• Attend to customer quality issues.
• Improve manufacturing processes and products
• Provide quality services to ensure compliance with the quality system
• Achieve quality targets of products

Requirements :

• Diploma / Degree in Engineering
• No experience are welcomed
• Good interpersonal and communication skills
• Proficiency in spoken and written Chinese is required to liaise with Chinese stakeholders

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Job Descriptions

• Create firmware specifications based on design rules, internal processes, and product/system requirements.
• Design and develop embedded firmware in accordance with established design rules, processes, and specific customer/product requirements.
• Development and implementation of signal processing algorithms in embedded firmware, with cross functionality team.
• Create and conduct review on test methodologies, validate design performance to specifications, debug embedded software, and document final design.
• Support production implementation in the embedded software perspective
• Collaborate with cross functional teams to sustain product lifecycle including customer complaints, failure analysis, etc.
• Liaising with Headquarter on the technical support and technology transfer.
• Verify regulatory compliance with support from head office.

Job Requirements

• Master / Bachelor in Electronic / Computer Engineering or equivalent
• Minimum 3 years relevant experience in embedded software design and development
• Strong knowledge and direct experience with C & C++ programming languages
• Strong knowledge on digital electronics hardware including I2C, SPI, UART, PWM, ADC, USB, etc.
• Experience in designing, coding, debugging and validating on ARM Cortex microcontrollers are preferred.
• Knowledge on Python & Matlab would be advantage.

HOW TO APPLY:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431