• To handle the full spectrum of project management
• To lead a site Management team to complete the project on time and within budget
• To inspire and motivate the site team to work effectively and efficiently
• To enforce appropriate measures so as to comply with the required standard of safety in execution of tasks.
• To drive high productivity on site using relevant cost saving methods at all times.
• To ensure that the documented Quality and workplace health and safety (WHS) policies are effectively implemented, maintained and reviewed.
• To ensure the Project Quality and WHS objectives are being met and any discrepancies are being addressed immediately.
• To ensure that the overall phases of the project is effectively coordinated and organized.
• To liaison with the client, consultant, suppliers (sub-contractors) and other relevant authorities on management issues pertaining to the project.

Requirements:

• Degree / Diploma in relevant Engineering discipline.
• Must have at least 5 years of post-graduate experience in project management
• Ability to handle Projects independently.
• Ability to display initiative in execution of tasks and being pro-active in the delivery of tasks
• Dealing professionally in managing tasks and consistently meet tight deadlines
• Attention to details and good problem solving skills

• To carry out instrumentation related detailed design and preparation of drawing
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram
• To carry out instrumentation calculation for the design
• Responsible for reviewing of instrumentation documents and specification from clients and consultants
• To check and review all instrumentation related drawings and documents from suppliers and vendors
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office
• To co-ordinate with engineers of other disciplines within the department
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc
• To provide technical support to project team for on-going projects and resolve any technical issue on site
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

You will work as an integral part of the laboratory operations team, providing support to the laboratory manager in operations and related laboratory duties such as core equipment training, procurement and safety matters. If you thrive in a dynamic environment and have a passion for managing laboratory operations and contributing to scientific advancements, this role could be an exciting fit for you.

Key Responsibilities

• Oversee the daily operations of the laboratory, ensuring that all processes and procedures are followed accurately and efficiently
• Facilitate training and development of laboratory users
• Support the operations team on laboratory safety and documentation
• Ensure compliance with all relevant regulations and safety standards to maintain a safe working environment
• Manage the laboratory procurement of equipment and supplies, including negotiating contracts with vendors and suppliers
• Implement and oversee maintenance schedules for laboratory equipment to ensure optimal performance and longevity
• Maintain the microfabrication cleanroom in a functional state
• Stay abreast of technological advancements to enhance operational effectiveness.
• Other ad-hoc duties

Qualifications

• Bachelor’s or Master’s Degree in Engineering or related field from a reputable university

Requirements

• Working experience in a research/laboratory environment and familiarity with research operations are preferred
• Working experience in rapid prototyping, CAD or cleanroom microfabrication is preferred, but not necessary
• Understanding of safety regulations and compliance
• Ability to work cooperatively and communicate effectively with team members and researchers
• Passionate in mastering research equipment and passing on knowledge to user

ParallelChain Lab is looking for an experienced front-end/full-stack engineer to join our team. You will design and build frameworks that support complex web/mobile applications, speed up development, and improve code quality.

This is a full-time, on-site position based in Singapore.

Main Duties

• Lead the development of our AI and blockchain applications (e.g. crypto wallet, KYC solutions), ensuring optimal performance and user-friendliness.
• Collaborate with other teams (e.g. design, marketing, data science) to convert ideas into code.
• Mentor junior developers, code review, and troubleshoot issues in production environments.

Requirements

• Bachelor's in Computer Science.
• Experience in implementing JavaScript frameworks and libraries.
• Familiarity with module bundlers (e.g. esbuild, Webpack, Parcel, Vite) and mono-repo tools (e.g. Turbo, Nx)
• Familiarity with CICD pipelines and DevOps.
• Experience with mobile development (e.g. Flutter) is beneficial.
• An active portfolio (e.g. GitHub) showcasing the requirements below:
• Minimum 3 years of JavaScript, NodeJS, and server-side rendering experience.
• Hands-on experience with UI rendering frameworks (e.g. React, NextJS), web performance optimisation, and error monitoring.
• Proficient in styling & UI libraries (e.g. Tailwind, MUI, styled-components).
• Knowledgeable with unit and e2e testing.

Benefits & Work Environment

• Health insurance including dental coverage.
• Special leave provisions such as marriage leave, compassionate leave.
• Staff stock options and performance-based token rewards.
• A fun and diverse team!

Key Responsibilities:

• Develop power measurement device with wired & wireless connectivity.
• Design & Develop firmware for HEMS (Home Energy Management System), IoT gateway, and Human-Machine Interface products.
• Develop peripherals using MCU/DSP.
• Develop applications/products based on the Linux Platform.
• Conduct design reviews, bug fixes and update/create design documentation.
• Work with other team members to test and verify system-level functionality.

Requirements:

• Bachelor/Master of Electrical/Electronic/Computer Engineering
• Min. 3 years of working experience in R&D or product development as a firmware engineer.
• Extensive experience in Embedded Programming using C/C++/Rust for Embedded Linux and MCU
• Experience in real-time operating systems (FreeRTOS…etc.)
• Source code control and management using Git.
• Knowledge of Python to create debugging scripts.
• Experience in coding and debugging various communication interfaces and protocols (I2C, SPI, UART, Modbus RTU/TCP, RS232/485)
• Experience in wireless communication systems and protocols (IEEE 802.15.4, Wi-Fi, Bluetooth, Zigbee, Thread, LTE, NB-IoT, LoRa)
• Able to read schematics, and utilize Oscilloscopes and other test equipment to debug Firmware issues.
• Remote firmware update and bootloader design

Key Responsibilities:

• Develop and maintain server-side application logic.
• Implement data storage solutions with Redis.
• Manage messaging systems with Message Brokers.
• Collaborate with front-end developers to integrate user-facing elements with server-side logic.
• Collaborate with AI developers to integrate AI modules.
• Write reusable, testable, and efficient code.
• Design and implement low-latency, high-availability, and performance applications.
• Implement security and data protection measures.
• Integrate data storage solutions and third-party services.
• Implement an email notification system for abnormal events.
• Develop and maintain microservices architecture.
• Implement and manage CI/CD processes.
• Manage and deploy applications on Kubernetes.
• Troubleshoot, debug and upgrade software.
• Write technical documentation.

Requirements:

• Proven experience as a Software Engineer or similar role in software development.
• Proficiency in using Redis and Message Brokers.
• Experience in implementing email notification systems.
• Strong knowledge of server-side languages.
• Experience in microservices architecture project development.
• Proficiency in DevOps and familiarity with CI/CD processes.
• Familiarity with Kubernetes.
• Familiarity with front-end languages (e.g., HTML, JavaScript, and CSS).
• Degree in Computer Science, Statistics, or a relevant field.

Job Responsibilities

· Ensure that the Plant is constructed to the Drawings, Specifications, Applicable Standards, and Good Construction Practices & to Schedule and maintain records for final documentation

· Comply with the Company's Construction Methods, Procedures and Practices in all respects, particularly those relating to Quality Assurance, Safety, Personnel, and Industrial relations; where these are found to be inadequate immediately report the deficiencies and suggest solutions.

· Ensure timely and speedy resolution of problems encountered at Sites and monitor Corrective actions.

· Check the daily PTW system and make sure all activities shall be covered by PTW system

· Check the assigned activities at site and make sure works shall ongoing well with quality and safety & On-time

· Plan and prepare minimum in advance Manpower, Material, Machinery as per given task

· Work Progress Update And Mitigation Plan Discussing In Daily Toolbox Meetings and Weekly Meetings

· Supervises the multi-disciplinary construction project site team in accordance with requirements specified in the contract documents

· Works closely with overall project and construction management leadership to ensure successful delivery of Project
Works closely with construction and engineering management on coordination of inter / intra contract activities.

· Assess feasibility of time schedule and negotiates planning with parties involved.
Determines division of work, and controls quality.

· Initiates and leads improvements and is responsible for safety.

· Maintaining good relationships with The Client and contractors and solving project issues timely throughout construction tenure

· Read The ITP (Inspection And Test Plan) Of Each Activity And Make Sure Construction Quality Is Met For Each Activity.

· Plan and Prepare a construction sequence for the installation of Equipment’s, structure, and piping and agreed with clients and subcontractors.

· Review the Lifting plan and rigging plan in accordance to plan and approve.

· Installation of Equipment’s and structure will installed as per the plan.

· Supervise fabrication and erection of pipe spools and pipe supports as per latest issued construction drawing.

· Supervising Equipment installation and piping works to be performed by construction sub-contractor and to insure the compliance with established the construction activities.

· Evaluate the construction sub-contractor work capability according to the programs to be implemented and promote corrective action where necessary.

· Monitoring the progress with schedules and updating to Construction Manager.
Make daily man-hour consume by sub-contractor and estimate the modification activities

· Ensure the proper execution of inspection, test in accordance with the field quality control plan, and monitor the adequacy result.

· Organizing for preparation of piping systems for testing based on the test pack limits specified in the approved test packs.

· Attend final walkthrough of completed piping systems and verify clearing of all punch list prior to mechanical completion.

Job Requirements:

· Bachelor Degree or Diploma in Engineering or any relevant fields

· Relevant experience in Testing, Inspection and certification industry will be an advantage

· At least 3 years of relevant work experience

· Possess excellent interpersonal and communications skills

· Good initiative, well organized, meticulous and able to work independently

Senior Deskside/Desktop Support Engineer

We are looking for experienced junior and senior full-time deskside engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Able to support off hours or require to perform ad hoc duties as and when needed
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences for junior level.
• At least more than 6 years of IT deskside support experiences for senior level.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

• Position :Project Engineer
• Location : Islandswide- Office in Outram
• Working hours : 5 days work week;(8.30am, -6.00pm)
• Salary (commensurate with experience) : Up to $5700 + AWS + Overtime + Performance Bonus + $60 Mobile reimbursement + Birthday leave + Health insurance
• Duration : Permanent
• Industry : Security system

Main responsibilities:

• Lead and direct projects and ensure they are directed towards a common objective
• Engage and communicate with stakeholders to deliver project milestones and comply with strict deadlines
• Ensure client satisfaction and manage escalations, acting as single point of contact to the client
• Ensure that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Ensure proper documentation is in order
• Any other duties as assigned

Requirement:

• Minimum Diploma in Electronics & Communication Engineering or related field
• Preferably with 3 years’ relevant work experience, or entry level candidates in relevant field of study
• Basic technical knowledge on ELV, Automation, Networking and Security Systems (CCTV, Card Access, Alarm System) will be an advantage
• Candidates from the same industry will be highly preferred.

Email to [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

Responsibilities

• Involved in company wide design and UX process from concept to outcome, high-level discussions to fine details
• Assisting in digital transformation, improving UX and frontend development standards and shaping up the company's agile culture
• Collaborate closely with different teams, stakeholders and vendors to streamline workflow, and facilitate and execute high quality experiences for multiple exciting projects
• Creating UI pattern framework that Application Developers can re-use in the future using HTML/CSS/JavaScript
• Ensure consistency of the user interface across multiple platforms and to conduct quality assurance checks of elegant frontend code, including HTML, CSS and JavaScript

• Bachelor's Degree in Computer Science/related fields or equivalent with total development experience of at least 5 years
• Expert in JavaScript, REST, HTML, CSS, and MVC frameworks; experience in working with Less/Sass
• Familiar and hands-on experience with AngularJS, ReactJS, Vue.js, or other frontend frameworks
• Experience in working on applications powered by Drupal CMS (traditional fully coupled; headless fully decoupled with a presentation layer running on NodeJS + VueJS; hybrid progressively decoupled)
• Experience in PatternLab design and implementation, especially Twig-based pattern library and prior experience working with Agile methodologies, such as Scrum, Kanban, and familiar with GIT
• Possess good understanding of web UI design principles and an ability to squarely discuss UI issues with UX designers for optimal solutions
• Participating large scale of projects involving vendors and candidates with prior experience in news and publishing domain will be a plus

Job description
The candidate will be part of a team developing research projects on textual analysis and data mining. The responsibilities include but are not limited to:

• Research, develop and evaluate textual analysis algorithms and implementations
• Work with team members to develop end-to-end solutions leveraging on textual analysis and data mining for various applications domains, such as healthcare, aerospace, built environment and fintech
• Brainstorming technical solutions to address relevant industry problem statements
• Assist project leads in the execution and completion of tasks to required standards

Job requirements

• Master or Bachelor degree in STEM or AI/ML related fields
• At least 4 relevant years of experience
• AI/ML experience in industry and/or academia is highly sought
• Strong programming skills in Python (preferred) or R
• Knowledge and demonstrable experience in open-source NLP packages such as NLTK, Word2Vec, SpaCy, Gensim, Stanford CoreNLP will be a differential
• Smart and hardworking individual who can work under pressure within a tight deadline
• A good team player with can-do attitude
• Solid communication skills and problem-solving skills

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 3 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• Develop power measurement device with wired & wireless connectivity.
• Design & Develop firmware for HEMS (Home Energy Management System), IoT gateway, and Human-Machine Interface products.
• Develop peripherals using MCU/DSP.
• Develop applications/products based on the Linux Platform.
• Conduct design reviews, bug fixes and update/create design documentation.
• Work with other team members to test and verify system-level functionality.

Requirements:

• Bachelor/Master of Electrical/Electronic/Computer Engineering
• Min. 5 years of working experience in R&D or product development as a firmware engineer.
• Extensive experience in Embedded Programming using C/C++/Rust for Embedded Linux and MCU
• Experience in real-time operating systems (FreeRTOS…etc.)
• Source code control and management using Git.
• Knowledge of Python to create debugging scripts.
• Experience in coding and debugging various communication interfaces and protocols (I2C, SPI, UART, Modbus RTU/TCP, RS232/485)
• Experience in wireless communication systems and protocols (IEEE 802.15.4, Wi-Fi, Bluetooth, Zigbee, Thread, LTE, NB-IoT, LoRa)
• Able to read schematics, and utilize Oscilloscopes and other test equipment to debug Firmware issues.
• Remote firmware update and bootloader design

Key Responsibilities:

• Develop and maintain server-side application logic.
• Implement data storage solutions with Redis.
• Manage messaging systems with Message Brokers.
• Collaborate with front-end developers to integrate user-facing elements with server-side logic.
• Collaborate with AI developers to integrate AI modules.
• Write reusable, testable, and efficient code.
• Design and implement low-latency, high-availability, and performance applications.
• Implement security and data protection measures.
• Integrate data storage solutions and third-party services.
• Implement an email notification system for abnormal events.
• Develop and maintain microservices architecture.
• Implement and manage CI/CD processes.
• Manage and deploy applications on Kubernetes.
• Troubleshoot, debug and upgrade software.
• Write technical documentation.

Requirements:

• Proven 5 years of working experiences as a Software Engineer or similar role in software development.
• Proficiency in using Redis and Message Brokers.
• Experience in implementing email notification systems.
• Strong knowledge of server-side languages.
• Experience in microservices architecture project development.
• Proficiency in DevOps and familiarity with CI/CD processes.
• Familiarity with Kubernetes.
• Familiarity with front-end languages (e.g., HTML, JavaScript, and CSS).
• Degree in Computer Science, Statistics, or a relevant field.

• Position : Sales Engineer - (Industrial Piping//Have own car/Outdoor) - Up to $5000 + Bonus
• Location : West - Tuas (Not required to report to office everyday)
• Working hours : Monday to Friday | 8.30am - 5.30pm
• Salary (commensurate with experience) : Up to $5000 (based on experience & qualifications) +Average of 2 Months Bonus + Claimable Transport Expenses + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Industrial Piping

Main Responsibilities:

• Service existing customers and develop new clients to expand company market share for Industrial product portfolio in a designated region
• To promote and market all Industrial products on agreed quarterly and annual target volume.
• Specifying of company’s product to all relevant clients, consultants, engineering companies, design companies and end user.
• Establishing contact with consultants, contractors, EPCs and project owners
• Managing and interpreting customer requirements ; Negotiating tender and contract terms
• Offering after-sales support services to customers
• Preparing weekly reports and call plan to the general manager
• Making technical presentations and demonstrating how a product will meet client needs
• Offer pre-tender technical assistance and product education to the client
• Compile lists of prospective customers and projects for use as sales leads.
• Follow up project activities and update project lists.

Requirements:

• Diploma in mechanical or Chemical engineering with at least 1-2 years of industrial sales experience
• Experience in water treatment, chemical, Semiconductor and utility segments are an added advantage
• Bilingual in English and Mandarin to communicate with Associates who can only converse in Mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

About Our Client

Our client, a leading software company with strong presence in South East Asia, and good reputation in the Internet industry. You will be joining a young and energetic team with strong growth opportunities!

Responsibilities

As a devops software engineer, you will be part of a functional team to manage and monitor cloud operations and cloud systems. You will participate in the design, development of cloud service infrastructure for the company.

The Successful Applicant

A successful candidate should have the following:

1. Bachelor’s degree in Computer Science, a related field or equivalent practical experience.

2. At least 3 years of work experience as devops, Database administrator, or SRE.

3. Experience with managing and monitoring tools like Ansible/Prometheus/Grafana

4. Experience in Linux system configuration, AWS services

5. Familiarity with network protocols, http, TCP/IP technology will be a plus

6. Deep technical knowledge of designing microservices for stable performance under high volume of traffic.

About Us

• Dada Consultants was established in 2017, with the commitment of providing the best recruitment services in Singapore. We are comprised of a dynamic head-hunting team dedicated to sourcing for highly competent professionals in IT industry. We provide enterprises with customized talent solutions, and bring talents to career advancement.

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

EA Registration Number: R21102607

Data provided is for recruitment purposes only

Business Registration Number: 201735941W

Licence Number: 18S9037

· Minimum 7 years of relevant experience

· Responsible for the planning activities within a project and organisation planning across all projects.

· Provide project Progress S curve, activity list, logic diagram (PERT , CPM), time scaled logic diagram, Bar chart, manpower histogram, resource and cost curves.

· Publish the planning weekly report of all projects and disseminate to key stakeholders.

· Overall project coordination liaising with engineering, procurement and construction team for the purpose of developing a fully integrated schedule.

· Follow through construction, commissioning, qualification and handover.

· Obtain input from project team members, contractors, suppliers and client to support the development of a baseline schedule, and subsequently to update schedule progress and forecasting.

· Use planning/scheduling principles and methods including: CPM scheduling techniques, Resource loading of schedules, Field Progress Measurement.

· Analyse critical path and highlight to project team.

· Coordinate and support the preparation of monthly spending plan curve.

· Provide a regular management update on the progress of the major activities in process improvements and quality improvements

· Any other tasks as assigned by your Superior/s

• Support the Technical section in the Power and Renewables team for the development of Renewable Generation Projects
• Perform site assessments and evaluate engineering designs for ground mounted solar projects throughout the project lifecycle
• Follow up on the detail engineering phase with selected partners, ensuring compliance with Technical Specifications and relevant legal requirements of the Renewable Generation Projects
• Support the execution of Renewable Generation Projects with strict compliance of HSE, Environmental, Quality and Keppel relevant policies
• Supervise and oversee the on-site construction and commissioning processes to ensure the projects meet the design specifications
• Provide technical input for Operation & Maintenance activities (such as O&M manual, solar monitoring setup, etc.)
• Stay abreast of industry trends, new technologies, and best practices to improve project delivery continuously
• Ensure proper coordination between the Renewable Generation Projects and the rest of the Keppel stakeholders involved in the development of the Power Generation and Transmission Projects
• To undertake additional duties and responsibilities as deemed necessary

Requirement

• A Diploma in Electrical or Energy Engineering
• Strong technical knowledge of electrical engineering principles, including AC and DC systems
• Proficiency in industry-standard design tools, such as PVsyst, Helioscope, SolarGIS, and Homer Pro
• Proficiency in AutoCad
• Detailed knowledge and experience of modern Health, Safety and Environmental practices
• Good understanding, technical knowledge and experience in the Design and/or Construction of large-scale ground mounted Solar PV Power Project

Responsibilities:

• Site viewing , co-ordination and oversee ongoing job progress for AV products
• Termination, testing, commissioning and project handover
• Perform preventive maintenance

Requirements:

• "O" Level/ITE/Diploma/Entry level preferable with electrical experience
• Computer/electrical/electronic knowledge will be added advantage
• Preferably possess Class 3 license
• Able to plan & work with sub-contractor to complete the project within a given time frame
• Possess good interpersonal and organization skills
• Good soldering skill on audio & video connectivity
• A good team player customer orientated

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 processes.
• conducts Design Reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Operations Manager

Field Service Engineer

We are looking for experienced junior and senior full-time Field Service Engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Able to support off hours or require to perform ad hoc duties as and when needed
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences for junior level.
• At least more than 6 years of IT deskside support experiences for senior level.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

-Ensure achievement of high safety and quality standards for site construction activities.

-Liaise with clients, consultant and relevant authorities on their engineering request.

-Propose quotation for lift modernization, lift upgrading and repairing/replacing to the client and consultant.

-Monitoring part repair and replacement to ensure that repair work is fully completed without defects.

Electrical Engineer Responsibilities:

• Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.
• Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.
• Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.
• Ensuring that installation and operations conform to standards and customer requirements by preparing electrical systems specifications, technical drawings, or topographical maps.
• Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.
• Ensuring compliance with specifications, codes, or customer requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.
• Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.
• Preparing specifications for purchases of electrical equipment and materials.
• Supervising or training project team members.
• Estimating material, labor, or construction costs for budget preparation.
• Maintaining electrical equipment.
• Working with a variety of technicians.

Electrical Engineer Requirements:

• Bachelor's degree in electrical engineering degree from an accredited school.
• Licensed as a professional engineer.
• Experience in using or a desire to learn the required software.
• Knowledge of applicable codes related to electronic engineering.
• Proficient in design and calculation software.

Job Description

• Support field service engineers on technical challenges.
• Perform feasibility study on new samples provided by customers. This includes getting a good understanding of customer expectations, discussing with design engineering teams to work out an optimal solution, and preparing reports.
• Represent the applications team in selected new product development programs. Join design reviews, formulate useability ideas, prepare and conduct internal alpha test plans, as well as presentation to senior management.
• Perform acceptance testing of newly developed customer features.
• Support beta installations at customers when required.
• Prepare technical training material and conduct training.
• Review customer specifications as part of pre-sales activities.

Minimum Qualifications

• Minimum Bachelor’s Degree in Engineering with 7+ years' of related working experience.
• Experience as a technical specialist or application engineer in high technological products is an advantage.
• Product training experience is a plus.
• Dynamic and likes to interact with people, with good communication skills.
• Excellent organizational, analytical, project management and self-leadership skills
• A keen technical mind, an eye for detail, a positive drive and committing to results.
• Strong analytical and problem-solving skills as well as the ability to absorb and transfer knowledge to others.
• Willing to travel.

The candidate will lead and manage the development team forthe successful implementation of healthcare IT solution or software product development.

Role and Responsibilities:

· Support project manager or product owner on project or product planning

· Translate business requirements into technical architectures & detail solution

· Assess and validate solution and infrastructure feasibility in hybrid cloud environment and compliance to IT policy

· Design application architecture including the integration with external systems

· Develop the detail design of the core application components

· Ensure the application has robust design and security protection

· Hands-on coding and coach internal development team on design and coding

· Work with relevant DevOps engineer for Release management and deployment of application releases

Requirements:

· Bachelor's Degree, Post Graduate Diploma, Professional Degree in Computer Science, Information Technology.

· 10+ years of relevant work experience in software product development and life cycle.

· Strongexperience in API design and implementation

· Experience inapplication architecture design and database design

· Hands-on development experience for Frontend & Backend application (C# .Net core & ReactJS)

· Experience in AWS or Azure

· Experience in Azure DevOps or equivalent CI/CD

· Experience in Microservices design and development will be advantageous

· Knowledge and experience in application design patterns

· Proactive and meticulous

· Value driven and versatile

· Approach design and development of solution with the mind set of software product development

· Experience with agile development methodologies