Job responsibilities

1. Responsible for Physical Design for Full chip/Blocks covering Floor planning, Placement, Area Optimization, Clock tree synthesis, Placement optimizations, Routing, Timing Closure, power network design, Voltage drop analysis, RC extraction, etc.

2. Be a highly-valued member of our start-up like team through excellent collaboration and teamwork with other R&D Engineers.

3. Work with Frontend team to understand the RTL design and drive physical aspects early in design cycle for physical design closure.

Job requirements

1. Bachelor's degree or above, major in Microelectronics / Electronic engineering / Communication engineering and other related fields.

2. More than 3 years working experience in layout and wiring of 40 nm and below technology.

3. Able to independently complete the whole chip P&R process and IR_ Drop, STA, low power inspection.

4. Familiar with TCL or Perl and other scripting languages.

5. Familiar with design flows and EDA tool software.

6. Familiar with Sign-off methodology and the use of EDA tool software in STA / power.

Qualification (s) – BE/ BTech/ MTech/MS/ PhD

Domain - Electronics, Electrical, Computer Engineering or Computer Science Engineering.

Experience – Fresh Graduate Diploma with 0 to 2 years experence including IHL and Singapore Polytechnics Graduate with EEE qualifications.

Job Description –

RTL coding and module-level verification of digital IC circuit blocks

Assist DV engineering team for system-level verification and debug

Assist in creating and maintaining design documentation

Assist in the completion of sign-off GDSII working with DFT and PD engineering teams.

Requirement –

Highly motivated and driven to solve challenging design problems

Able to read and understand the architectural specifications at the sub-

system/chip level

Comprehend the Power-Performance-Area trade-offs in the development of micro-architecture

Proficient with at least one programming language

Preferred experience –

Concentration/major in IC Design

Hands-on experience in digital IC design

Knowledge of industry Protocols – PCIe, NVMe, USB4.0, DDR, AXI, CHI, AHB, MIPI, Display port, Ethernet etc.

Design Techniques – Low-power, UPF, Clock Domain Crossing (CDC),

Booting/Reset Flow

Proficient in a scripting languages – Shell scripting, Python, Tcl, PERL etc.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

About the Centre for Quantum Technologies (CQT)

The Centre for Quantum Technologies (CQT) in Singapore brings together physicists, computer scientists and engineers to do basic research on quantum physics and to build devices based on quantum phenomena. Experts in this new discipline of quantum technologies are applying their discoveries in computing, communications, and sensing.

CQT is hosted by the National University of Singapore. The Centre also has staff at the Agency for Science, Technology and Research, Nanyang Technological University, Singapore, and the Singapore University of Technology and Design. With some 200 staff and students, it offers a friendly and international work environment

Learn more about CQT at www.quantumlah.org

Job Description

The Centre for Quantum Technologies (CQT), National University of Singapore is looking for researchers and engineers to develop next generation quantum computers based on trapped ions. There are multiple positions available at different levels with a diverse set of expertise. This program is funded under the National Quantum Processor Initiative, a flagship program under the National Quantum Office Singapore. The aim of the program is to develop a full stack quantum processor based on Yb-Ba ions. This program brings together the unique capabilities of the existing ion trap groups in CQT expertizing on these two-ion species to explore scalability of the system.

The Centre for Quantum Technologies is a pioneering quantum centre in the world offering a diverse research culture at the intersection of three different fields namely, theoretical, experimental Physics and computer science. We offer competitive salary and enriching intellectual experience in a city state known for its forward outlook. This program also allows strong collaboration with leading academic and industrial groups within and outside the country.

The team members will work to build electronics to control the ion trap quantum processor. That includes digital design, RF and microwave sources and low noise analog / digital front end. The ideal candidate should have practical experience in at least one of the following fields and desire to cross the boundaries and learn relevant skills.

The successful candidate will be involved in all stages of the development cycle: collaborate with other team members to define the technical requirements, design, manufacturing, testing and integration of the prototype into the control system.

Job Requirements

We are looking for several electrical engineers to join the small team of scientists and engineers working on the next generation of the ion trap quantum processor. The candidate should have:

• Bachelor or Master degree in electronics, electrical engineering or related fields;
• At least 1-2 years of experience in electronics design is preferred;
• Experience in programmable digital logic design using Verilog or VHDL, digital signal processing, and familiarity with control theory;
• Design and characterisation of low noise electronics for the analog front end, good understanding of the noise sources in electronic circuits;
• Design and implementation of the RF electronics circuits.

Responsibilities:

• Collaborate with the presales team to conduct site surveys and assessments. This involves evaluating the customer's location, infrastructure, and specific requirements to determine the ideal setup and deployment for the robot.
• Responsible for setting up, commissioning the robot on-site and ensuring the robot is ready for operation.
• Perform thorough testing, identify and troubleshoot errors/failures and implement appropriate solutions to resolve the issues promptly.
• Handle repairs and maintenance tasks for the robot. This involves conducting regular maintenance activities as per the SOP/guidelines and addressing any breakdowns or equipment failures.
• Travel to customer sites, both local and international (whenever necessary), to provide on-site support, conduct setup/commissioning, perform maintenance tasks, and resolve technical issues at short notice to provide support or address urgent issues. Additionally, you should be willing to adapt to the customer's work environment and schedule, which may include night shifts and public holidays when necessary.
• Responsible for documenting service and fault reports. This includes accurately recording the details of the service provided, issues encountered, and the actions taken to resolve them. These reports are typically submitted to superiors and key individuals within the organization for review and analysis.
• Maintain detailed records of all tasks related to customer service. This includes maintaining customer service logs, updating internal service records, and ensuring all documentation is completed in a timely manner.
• Train customers and end-users on the proper handling, maintenance, and safety procedures of robot operation. Create and update documentation, including user manuals and service guides, to facilitate knowledge transfer and enhance support processes.

Requirements:

• Minimum Diploma in Engineering or other related fields
• 2 years of experience in servicing electronic and mechanical equipment / machines.
• Experience with troubleshooting and debugging hardware, electronics, and software.
• Excellent problem-solving skills and the ability to work under pressure in fast-paced environments.
• Effective communication skills with the ability to explain complex technical concepts to both technical and non-technical stakeholders.
• Strong communication skills in English (both oral and written)
• Tools: Basic knowledge on handling mechanical, electrical and electronic tools.
• Able to perform simple network configuration.
• Able to work independently and as part of a harmonious and effective team.
• Able to communicate well and tactfully with customers/distributors.

Job Description: Semiconductor Process Integration Engineer

Position Overview: We are seeking a highly-skilled Process Integration Engineer to join our team. The primary responsibility of this role is to develop and deliver advanced process modules with our partner foundry facilities for optoelectronic integrated circuits (ICs). The ideal candidate will have a strong background in semiconductor process technology and a proven track record of working effectively with external partners.

Key Responsibilities:

1. Process Development: You will join an existing team to design and develop semiconductor process flows to for a proprietary CMOS + III-V monolithic integration platform. You will integrate various process modules into a cohesive manufacturing process, optimizing for performance, yield, and reliability.

2. Collaboration with Fab Partners: You will be responsible for management of projects under your purview with one or more fab partners, including aspects such as budgeting, schedule and resource planning. You will work closely with fab partners to develop, optimize, and implement process modules for optoelectronic ICs, ensuring compatibility with fab partner manufacturing protocols. You will provide technical support and feedback to fab partners, troubleshooting process-related issues and implementing corrective actions. You may also be embedded within the fab partner’s team for specific durations during critical phases of the process development effort.

3. Data Analysis: You will analyze process data to identify trends, root causes of issues, and opportunities for process improvements. You will also design experiments and test plans to retire technical risks and resolve process issues. You will also be responsible for maintaining detailed documentation of process development activities, including process flows, specifications, and test results.

Qualification (s) – BE/ BTech/ MTech/MS/ PhD

Domain - Electronics, Electrical, Computer Engineering or Computer Science Engineering

Experience – 04 to 10 years

Highly motivated and driven to face the challenging design

problems

Architecture and Micro-architecture of complex digital SoCs

and mixed signals SoCs

Be able to communicate with system architects and decipher

system requirements and develop architectural specification of

the SoC

Understanding the future market requirements and develop

micro-architecture for the silicon to serve multiple generations

of market is a big plus.

Be able to micro-architect the chip considering low power and

high-performance techniques

Complete sign-off GDSII working with DV, DFT and PD

engineering teams.

Be able to comprehend usual service level agreement features

–

Power, Performance, Area and Customer Schedule, andaccordingly plan the development.

Preferred Expertise:

Architecting, micro-architecting and designing SOC for

embedded processors for storage, IoT, security and compute

applications

Functional safety, power management, coherency, security

Protocol knowledge - PCIe, NVMe, USB4.0, DDR, AXI, CHI,

AHB, MIPI, Display port, Ethernet

Design Techniques – Low-power, UPF, Clock Domain Crossing

(CDC), Booting/Reset Flow SW and/or hardware validation

Scripting Languages – Shell scripting, Python, TCL, PERL etc.

Job Description

• Develop verification plans based on design-related documentation, set up the verification environment, and complete verification from module level to system level.
• Execute regression testing and enhance verification coverage.
• Collaborate with chip design engineers to identify and resolve design defects.
• Guide the design team in implementing a verification-friendly design flow.
• Perform RTL-level, gate-level, and low-power verification with UPF (Unified Power Format).
• Assist FPGA engineers and software engineers in completing FPGA prototype testing.
• Ensure the integrity and correctness of chip designs from multiple dimensions.

Requirements

• Bachelor’s degree or higher in Computer Science, Electrical Engineering, Communications Engineering, or related fields. 3+ years of work experience.
• Experience in design or verification of peripheral modules, communication modules, or SoC systems.
• Proficiency in Verilog and expertise in C/SystemVerilog.
• Knowledge of one or more scripting languages such as Python, Ruby, Perl, Shell, Tcl, or Makefile.
• Experience with UVM (Universal Verification Methodology) is a plus.
• Familiarity with the digital chip development process and successful tape-out project experience is an advantage.
• Experience with formal verification is a plus.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

One Research Engineer position is open in the research group of Assistant Professor Zhao Lin, at the Department of Electrical and Computer Engineering, National University of Singapore (NUS).

The Research Engineer (RE) will work closely with the Principal Investigator (PI) on visual navigation foundation model for mobile robots, exploration using reinforcement learning control, learning-based control, etc. The RE will develop and train algorithms that enable intelligent and robust autonomous navigation in unseen environments. Hardware experiments will be carried out to test and demonstrate the applications of the developed algorithms.

The initial appointment duration is 12 months, which can then be extended based on an evaluation at the end of the initial appointment.

The candidates should have a Master’s degree from a reputable university, with expertise in robot learning, reinforcement learning, and aerial robotics.

A successful candidate should have a solid mathematical background (such as in calculus, linear algebra, ODE/PDE, optimization, real analysis, probability theory, stochastic process, etc). Strong publication records in leading journals and conferences of the relevant fields, and practical hands-on experience in applying visual foundation models to real mobile robots are required.

Qualifications

• Possess a master’s degree in Computer Engineering/Science or strictly related (e.g., either Electrical Engineering, Mathematics, Communication, Mechanical, etc.)
• Have research experiences in computer vision, vision foundation model, control theory, reinforcement learning.
• Possess a strong academic record proved through coursework (especially math-intensive courses) and projects during his/her undergraduate and master’s studies.
• Proficient in C++ or Python. Familiar with machine-learning tools and packages. Familiar with various 3D simulation environments for quadrotor simulations. Familiar with ROS and quadrotor control algorithms.
• Have well-established analytical and problem-solving skills, as documented by publications that are relevant to the field of robot navigation, reinforcement learning control for robotics applications.
• Excellent communication skills as he/she is required to publish and present results at conferences and journals independently.
• Activity performed in world-class research environments is highly valued.

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Sustainability Engineer (ESG) to be part of our Supply Chain Department diverse team of talent. You will be responsible to support Company’s Environmental, Social and Governance (ESG) projects.

What you will be working on:

Project Management

- Lead and manage ESG projects & initiatives from inception to completion, ensuring alignment with corporate sustainability goals.

- Develop project plans, timelines, and budgets, and coordinate resources effectively.

- Prepare Capex Justification presentation in an accurate and timely manner to facilitate Management Team decision making

- Project lead in a cross functional team to ensure project schedule is executed in a timely manner and meeting project budget

Supply Chain

- Assist and take lead to drive the initiatives especially on Scope 3 Emissions

- Assess and quantify upstream and downstream emissions from the organization’s value chain, including suppliers, products, and waste disposal.

- Collaborate with suppliers and partners to develop and implement emission reduction initiatives, such as sustainable sourcing practices and transportation efficiency improvements.

- Review Supply Chain SOP & OI and ensure they are updated to ESG requirements

Reporting and Compliance

- Support Supply Chain Department on Company’s requirements for reports on sustainability metrics, including greenhouse gas emissions, energy consumption, and waste generation.

- Ensure compliance with regulatory requirements and industry standards related to sustainability and environmental management.

- Handle Compliance, Internal, Exernal and Customer audits to ensure compliance

- Liaison with related government bodies on grant and commercial apects

Continuous Improvement:

- Monitor and evaluate the effectiveness of sustainability initiatives and recommend improvements based on data analysis and industry best practices.

- Stay updated on emerging trends, technologies, and regulations in sustainability and incorporate relevant advancements into project strategies.

More about you:

• Degree in Chemical/Gas, Mechanical, Environmental, health and safety & other engineering.
• Possess knowledge on ESG, IPCC, RCA
• Preferably 4-5 years purchasing experience or engineering experience in a front end semiconductor plant .
• Knowledge and relevant experiences in Conflict Mineral, Green Procurement is a bonus.
• Knowledge in handling audits for Scope 1 emissions is a bonus

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

JOB HIGHLIGHTS

· Machine design in Mechanical aspect, Jig and Fixture, Equipment and development

· Provide Conceptual, mechanical part detailing and cost estimation

· BOM & machine manual writing

· Handle customers’ enquiries and issues

· Conduct machine acceptance with customer

· Co-ordination with sub-contractors for machine build

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

REQUIREMENT

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

· Able to work independently and within schedule

Geekplus is a global leader in mobile robotics technologies, providing innovative solutions for order fulfillment. With over 1,000 industry leaders using our systems, we deliver flexible, reliable, and efficient automation for warehouses and supply chains. Founded in 2015, Geekplus has more than 1,500 employees and offices worldwide, including in the US, Germany, the UK, Japan, South Korea, Mainland China, Hong Kong SAR, and Singapore.

------------------------------

We are looking for a Service Engineer to join our team. Are you someone who is driven by curiosity and craves a good challenge? Join us and be part of this exciting adventure!

What you have to do

• Serve as the site supervisor, overseeing and conducting relevant site activities during project implementation in the APAC region
• Collaborate closely with project managers, contractors, and suppliers to manage overall site performance
• Prepare daily on-site logs and records for customer and internal team reviews
• During the service phase, conduct preventive maintenance and perform root cause analysis of production issues using diagnostic tools
• Prepare a training manual and provide training and support to customers and other external parties

What you need to have

• A bachelor's degree in mechanical engineering or related disciplines
• Solid experience in equipment/hardware installation, maintenance, and site supervision
• Knowledge of Warehouse Management Systems, or other related logistics systems
• Proficiency in AutoCAD and Microsoft Office
• Good IT skills, including knowledge of network infrastructure, is a plus
• Frequent travel is required

------------------------------

What we offer

• Young and energetic work culture
• Opportunities for global mobility
• Double pay plus attractive performance bonuses
• Medical and dental coverage
• 14 to 21 days of annual leave
• Cozy office environment with refreshments
• Location: Tampines Plaza

If your qualifications, experience, and aspirations match our requirements, please send your resume with your current and expected salary to us. All information and materials submitted to Geek+ will remain strictly confidential and be treated for recruitment purposes only. Only short-listed candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

One Research Engineer position is open in the research group of Assistant Professor Zhao Lin, at the Department of Electrical and Computer Engineering, National University of Singapore (NUS).

The Research Engineer (RE) will work closely with the Principal Investigator (PI) on visual navigation foundation model for mobile robots, exploration using reinforcement learning control, learning-based control, etc. The RE will develop and train algorithms that enable intelligent and robust autonomous navigation in unseen environments. Hardware experiments will be carried out to test and demonstrate the applications of the developed algorithms.

The initial appointment duration is 12 months, which can then be extended based on an evaluation at the end of the initial appointment.

The candidates should have a Master’s degree from a reputable university, with expertise in robot learning, reinforcement learning, and aerial robotics.

A successful candidate should have a solid mathematical background (such as in calculus, linear algebra, ODE/PDE, optimization, real analysis, probability theory, stochastic process, etc). Strong publication records in leading journals and conferences of the relevant fields, and practical hands-on experience in applying visual foundation models to real mobile robots are required.

Qualifications

• Possess a master’s degree in Computer Engineering/Science or strictly related (e.g., either Electrical Engineering, Mathematics, Communication, Mechanical, etc.)
• Have research experiences in computer vision, vision foundation model, control theory, reinforcement learning.
• Possess a strong academic record proved through coursework (especially math-intensive courses) and projects during his/her undergraduate and master’s studies.
• Proficient in C++ or Python. Familiar with machine-learning tools and packages. Familiar with various 3D simulation environments for quadrotor simulations. Familiar with ROS and quadrotor control algorithms.
• Have well-established analytical and problem-solving skills, as documented by publications that are relevant to the field of robot navigation, reinforcement learning control for robotics applications.
• Excellent communication skills as he/she is required to publish and present results at conferences and journals independently.
• Activity performed in world-class research environments is highly valued.

SUMMARY

Direct Test Engineers I & II in operating within area of assigned responsibilities with a high level of efficiency, integrity and enthusiasm, striving to achieve excellence in all endeavors. Designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

Recruitment and Retention:

· Recruit and interview Test Engineers I & II.

· Communicate criteria to recruiters for Process Technician position candidates.

· Coach Test Engineers in the interviewing/hiring process.

· Monitor team member turnover; identify key factors that can be improved; make improvements.

Employee and Team Development:

· Identify individual and team strengths and development needs on an ongoing basis.

· Create and/or validate training curriculum in area of responsibility.

· Coach and mentor Test Engineers I & II to deliver excellence to every internal and external customer.

Performance Management:

· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).

· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team members based on feedback.

· Express pride in staff and encourage them to feel good about their accomplishments.

· Perform team member evaluations professionally and on time.

· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.

· Coordinate activities of large teams and keep them focused in times of crises.

· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:

· Provide communication forum for the exchange of ideas and information with the department.

· Organize verbal and written ideas clearly and use an appropriate business style.

· Ask questions; encourage input from team members.

· Assess communication style of individual team members and adapt own communication style accordingly.

FUNCTIONAL MANAGEMENT RESPONSIBILITIES

Business Strategy and Direction:

· Know and understand the campus strategic directions.

· Define, develop and implement Test Engineering strategies, which contribute to the campus strategic directions.

· Provide regular updates to Assistant Test Engineering Manager on the execution of the strategy.

Cost Management:

· Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).

· Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.

· Provide feedback to Assistant Test Engineering Manager on cost and cost trends.

TECHNICAL MANAGEMENT RESPONSIBILITIES

· Perform duties, which involve conventional engineering practices that may include a variety of complex duties from ICT, FVT, ESS to System level test.

· Manage the engineering test function for standard and/or custom devices.

· Through subordinate supervisors or professional staff, identify and evaluate test procedures and test equipment required to perform quality checks.

· Compile and document data necessary to analyze performance and make recommendations for changes in the testing process.

· Assist/spearhead in the development of special test equipment and software text programs as required for the successful completion of project.

· Assist customer, setup training program for new product testing procedures.

· Provide training and assist test engineers.

· Act as the liaison and technical conduit for assigned customers.

· Explore new avenues and test technologies for quality improvements on product assigned.

· Perform detailed analysis on test quality of product assigned, identify trends and spearhead corrective actions.

· Monitor, through assigned test engineer, all NPI activities.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS

Bachelors of Science in Electronics or Electrical Engineering from a college or university; and five to ten years experience

Job Description:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• ecome the technical Expert for the respective machine specialization.
• ● Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Preferred 3 years of relevant work experience in Etch Equipment
• LAM & Oxide tools preferred
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

• Position : Senior Project Engineer (Building & Construction/Civil Engineering) - Up to $7,500
• Location : Resorts World Sentosa
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $7,500 + Performance Bonus + Transport Allowance + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Monitor and manage the day-to-day operations of project
• Create project plans, schedules and budgets
• Liaise with Subcontractors, Surveyors and Site Supervisors/Foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with Owner/Client/Contractors/Subcontractors on the project related matters
• Carry out site inspection and ensure that the works are executed to the required quality standards

Requirements:

• Degree in Civil Engineering or equivalent with minimum 4 - 5 years of working experience in Building & Construction Industry.
• A team player with positive working attitude
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer/ Technician to be part of our IE&CE Advanced Mechatronics Department diverse team of talent.

What you will be working on:

• Fault identification, disassembly or removal of fault component
• Conduct acceptance tests on repaired part such that its functionality is repeatable and reproducible to ensure good quality
• Ensure proper knowledge transfer is conducted and supervise Industrial Attachment (IA) students
• Provide support to module Equipment Engineers and perform repairs for wafer fab frontline semiconductor production equipment and parts in cleanroom environment, on ad-hoc basis
• Adhere to SOP when performing repairs to ensure best quality and to strive to achieve 95% repair success rate
• Perform inventory control on consumables and spare parts used in repair workshop
• Source and liaise with vendors for quotations of required parts and follow up on delivery timeline
• Ensure workplace safety is practiced at all times

More about you:

• Diploma/ Higher Nitec/ Nitec (Microelectronics, Mechatronics, Electrical, Mechanical)
• Minimum 3 years of relevant experience in semiconductor field
• Fresh graduates are welcome to apply
• Expertise in either soldering, pumps, valves or strong knowledge in Microelectronics
• Able to perform circuit board repair and component level troubleshooting skills
• Resourceful and has initiative
• Working experience in front end semiconductor industry would be advantageous

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Remuneration: Basic & VB + $800 Flexi Dollars + 3 month performance bonus

Work location: Pioneer

Working hours: Mon - Fri, 8:30am - 5:30pm

Job Description:

• Manage daily operation activities in workshop and customer service
• Ensure the performance and reliability of XSQUARE’s fleet of AGVs
• Respond and provide technical guidance to customers regarding operational issues, software updates, general maintenance etc
• Ensure accountability and integrity operational readiness of workshop
• Develop all necessary policies and procedures to ensure the workshop is effectively maintained to ensure maximum efficiency
• Ensure staff are appropriately trained and motivated to carry out their responsibility to the required standards
• Deal openly and promptly with any problems and effectively identify and manage risk as appropriate
• Constantly review and streamline workflow and working conditions in order to achieve labor turnover and efficient operation
• To ensure all works are carried out in accordance with the safety and housekeeping requirements set by the company
• Provide the point of escalation for team for any operational issues
• Act as a bridge between sales, operations & customers
• Write technical report and submit to customer/manufacturer
• Preparation of reports on performance, budget and expenditure
• Plan and achieve financial budget and key performance indicators

Job Requirements:

• At least 3 years above experience in Industrial Robotics (AGV / Forklifts etc.)
• Candidates with experience from Robotics companies: strobo, hope technik, rockwell automation, omron, swisslog, would be highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

• Position: Service Technician/Engineer (Measurement/Instrument/Electronic)
• Location: Ang Mo Kio - Few bus stops from Ang Mo Kio MRT
• Working hours: 5 days work week, Monday to Friday 9.00am to 6.00pm
• Salary (commensurate with experience): Up to basic $4500 + $800-$1000 Transport allowance + 10 days Annual Leave + Variable Bonus + Phone Allowance
• Duration: Permanent
• Industry: Test & Measurement Equipment

Main Responsibilities:

• Provide technical support to customer.
• Perform Troubleshooting, Installation, commissioning, testing and repair of test & measuring instruments
• Assist in all sales and technical support activities.

Requirements:

• Minimum ITE Higher NITEC/Poly Diploma in Electrical & Electronic Engineering or equivalent
• Minimum 1-2 years related experience
• Candidate without experience is welcome to apply, full training provided
• PC Literate
• Bilingual in English and Mandarin to liaise with Chinese speaking clients who converse in Mandarin only

Email me at [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

Position overview

We are seeking a highly skilled and motivated Senior Software Engineer to join our planning and control team. As part of this team, you will work on cutting-edge research and development of planning algorithms that enable autonomous systems to navigate complex environments safely and efficiently. This is an exciting opportunity for individuals who are passionate about advancing the field of autonomy and robotics. You will play a key role in the design, development, and optimization of behavior and motion planning systems while collaborating closely with cross-functional teams.

Role responsibilities

• Improve the existing software architecture and design the right software architecture for new components
• Design and develop clean, fast, reliable code
• Implement advanced features for autonomous vehicles
• Uphold code quality continuous integration, automated testing, and code reviews
• Drive software engineering best practices and processes
• Create technical design documents
• Mentor other software engineers

Required experience

• Bachelor's or Master's degree in Computer Science, Robotics, or related fields
• 5+ years experience writing production-quality code in modern C++
• Understanding of behavior planning, decision-making frameworks (e.g., finite state machines, behavior trees), or related AI techniques.
• Experience with Motion Planning algorithms, such as RRT, RRT*, and other graph-search based algorithms
• Experience developing in a Linux environment
• Strong organization and communication skills
• Flexible problem-solver
• Bonus experience
• Experience with ROS or other similar middleware
• Experience with real world safety critical applications
• Experience deploying software tools and/or metrics

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]