As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The Candidate will be working on dynamic modelling and simulation of the powertrain of a full electric tug vessel, mainly using MATLAB/Simulink. The simulation models will be used to investigate the steady state and transient behaviour of the ship’s electric propulsion system.

Key Responsibilities

• Development of dynamic models of the ship’s electrical propulsion system including energy storage systems.
• Investigate steady-state and transient behaviours of an all-electric ship’s electrical system in various operational scenarios.
• Carry out mission-specific electrical power consumption analysis
• Electrical propulsion and ESS design optimization.
• Any other duties as assigned by the supervisor.

Job Requirements

• Bachelor's Degree or above in the areas of Electrical Engineering, Mechanical Engineering or Marine Engineering
• Other relevant disciplines are welcome to apply
• Background in programming languages and related research project experience is ideal

Roles & Responsibilities:

1. Coordination with Construction team/ Design Consultant/PE/construction subcontractor, etc. for Detail Design Development.

2. Carry out detailed analysis and design of civil, structural, and geotechnical works.

3. Prepare design calculation reports and structural drawings for authorities' submissions.

4. Planning relevant temporary civil structure, plan & section required for the Traffic diversion, such as Drain diversion, Retaining wall, shop drawing development.

5. Review and planning for ERSS system for Underground structure using Diaphragm wall such as KP, Decking, Strutting, decking, etc.

6. Check/Rectification of all the structural drawing/ shop drawing if required

Requirements and relevant experience are as below:

1. Bachelor’s / Master’s Degree of Civil Engineering or close discipline from a recognized Institution.

2. Strong engineering fundamental and analytical skills in geotechnical and structural analysis and design works is an advantage.

3. Good knowledge of the application of design and drafting software.

4. Minimum 5 years of experience in Civil and Structural Engineering especially for LTA Project.

5. Be well-aware of Traffic Diversion, Temp. Drain Diversion, and authority approval procedure.

6. Be well-aware of Underground Structure/Construction Sequences and related civil design works.

7. Be well-aware of Eurocode, LTA CDC, and relevant design specification/standards.

* Candidates who has experience as CS engineer (Design) in D&B contractor side would be an advantage.

* Interested applicants are required to submit their detailed CV and state their current and expected salary.

Job Overview

Do you want to further develop your analytical mind to pinpoint core issue and earn the satisfaction of resolving it ? Do you like working with fellow team members to improve your job routine and environment ? Do you crave job security and yet be at the frontier of technology?

Join us at UMC (SG), a leading global semiconductor foundry company manufacturing microchips for use in the present and for the future. In course of your work, you will learn internationally acclaimed analytical skills and techniques to apply in your work and personal life. Have the chance to work with engineers from other fields and process to resolve and improve current procedures.Seize the opportunity to take part at senior level in Quality improvement competition host in Taiwan national level and earn accolades as an elite engineer with awards and certification. Be recognized as an engineer of high calibre in Singapore and internationally.

Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality and lot handling
2. Maintain Equipment capability for production and meet production demand
3. Engage with Production line and Process Engineers to balance tool availability for production, troubleshooting and scheduled maintenance
4. Engage in Equipment troubleshooting and production quality improvement.
5. Evaluation of new equipment/materials and retrofits of Equipment for better efficiency / production quality

Qualifications

1. Possess at least a Bachelor's Degree in engineering in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering ,Physics, Automation, Aerospace Engineering
2. Able to think critically with strong analytical skills
3. Possess good communication skills and time management skills
4. Prior leadership or competition experience in school activities will be an advantage
5. Must be willing to commit shift work
6. At least 2 years with relevant working experience in semiconductor industry foundry

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• Fabrication of 2D materials based memristors using mask aligner, electron beam evaporator and shadow masks
• Characterization of 2D materials based memristors using a semi-automatic probe station, semiconductor parameter analyser.
• Characterization at the materials level using SEM, TEM, FIB, XPS, and Raman Spectroscopy.
• Other routinal paperwork related to the correct functioning of the group, including purchases, contract preparation and reimbursements.

Qualifications

• PhD in Materials Science and Engineering plus 3 years postdoc in memrsitors.
• Proficiency in using all the above mentioned machines
• Publications in top journals
• Fluent in English and Chinese language (including read/write) as the candidate is also expected to support applications for funding in collaboration with China (for example, with the NUS - Suzhou Research Institute).

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Integration diverse team of talent. You will be responsible to manage integration of all modules’ processes and the respective derivatives.

What you working on:

• To provide a leading role in the developing, transferring and maintaining of advanced CMOS fabrication technology with good process capability and high yield.
• Lead new technology transfer from mother fab or process development.
• Owner of new tapeout prototype lots and ensure 100% success rate.
• Drive process robustness improvement by providing root cause analysis and and collaborate improvement actions to meet 100% wafer acceptance test (WAT) Cpk goal & Baseline D0 target.
• Drive process excursion control by providing root cause analysis to modules and collaborate improvement actions to meet wafer acceptance test out of control % / out of specification % (WAT OOC%, OOS%) goal and single wafer low yield (SWLY) and single lot low yield (SLLY) goal.
• Collaborate with product engineer on product sensitivity related low yield and plan to do product specific process tuning to meet baseline D0 target
• Work with Customer Engineering to resolve customer complaints and provide customers with required information to meet customer concern and satisfaction & customer caution index (CCS & CCI) goal.
• Adhere to all FAB change management, safety & ISMS procedures
• Continuous improvement in d0, WAT performance, new tape-out (NTO) success and people efficiency.
• Ensure safety awareness
• Lead sub-team in x-functional continuous improvement projects.

More about you:

• Degree in Electrical/Electronics/Microelectronics/Material Science/Materials Engineering/Physics Engineering
• At least 2 years of relevant PI/Yield Engineering working experience in semiconductor manufacturing environment
• Strong understanding of device physics, advanced semiconductor process and SPC
• Strong analytical and problem solving skills to lead 8D team for corrective and performance actions
• Proficient in Microsoft business applications
• Proficiency in PROMIS system, Klarity ACE & DataPower will be an added advantage

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• Marine Civil Engineering
• Basic $4000 + $5000
• 5.5 days (8am-5pm/12pm)
• Office: Bukit Batok
• Working location: Project based

Responsibilities:

• Oversee daily vessel operations, including movements, documentation, and compliance.
• Manage ship and cargo documents, procurement, and maintenance requests.
• Submit monthly reports and assist with claims like demurrage and cargo shortages.
• Improve ship efficiency and oversee sea staff deployment.
• Maintain records and planned maintenance documentation.

Requirements:

• Diploma / Bachelor’s degree in Marine & Offshore Engineering, Mechanical Engineering, or a related field.
• Knowledge of international maritime regulations and environmental standards.
• Minimum 1 years hands-on experience with vessel operations, maintenance, or technical troubleshooting.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

• Marine Civil Engineering
• Basic $4000 + $5000
• 5.5 days (8am-5pm/12pm)
• Office: Bukit Batok
• Working location: Project based

Responsibilities:

• Oversee daily vessel operations, including movements, documentation, and compliance.
• Manage ship and cargo documents, procurement, and maintenance requests.
• Submit monthly reports and assist with claims like demurrage and cargo shortages.
• Improve ship efficiency and oversee sea staff deployment.
• Maintain records and planned maintenance documentation.

Requirements:

• Diploma / Bachelor’s degree in Marine & Offshore Engineering, Mechanical Engineering, or a related field.
• Knowledge of international maritime regulations and environmental standards.
• Minimum 1 years hands-on experience with vessel operations, maintenance, or technical troubleshooting.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

• Marine Civil Engineering
• Basic $4000 + $5000
• 5.5 days (8am-5pm/12pm)
• Office: Bukit Batok
• Working location: Project based

Responsibilities:

• Oversee daily vessel operations, including movements, documentation, and compliance.
• Manage ship and cargo documents, procurement, and maintenance requests.
• Submit monthly reports and assist with claims like demurrage and cargo shortages.
• Improve ship efficiency and oversee sea staff deployment.
• Maintain records and planned maintenance documentation.

Requirements:

• Diploma / Bachelor’s degree in Marine & Offshore Engineering, Mechanical Engineering, or a related field.
• Knowledge of international maritime regulations and environmental standards.
• Minimum 1 years hands-on experience with vessel operations, maintenance, or technical troubleshooting.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

• Marine Civil Engineering
• Basic $3000 + $6000
• 5.5 days (8am-5pm/12pm)
• Office: Bukit Batok
• Working location: Project based

Responsibilities:

• Coordinate maintenance activities for facilities and equipment to ensure optimal performance and minimal downtime.
• Ensure machinery and equipment (e.g., gensets, excavators) operate effectively to meet production needs.
• Manage tasks and resources across maintenance and logistics teams to achieve operational targets.
• Enforce safety measures during operations and address challenges to maintain efficiency.
• Lead daily tasks, including reporting and issue resolution.

Requirements:

• Diploma in mechanical engineering or related.
• 1-3 years of experience with excavators, heavy machinery, and equipment.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Job Overview
Do you enjoy solving riddles and have an inquisitive mind? Are you passionate about finding the source of a manufacturing process issue that causes a wafer yield breakthrough?

UMC is looking for a Defect Management (DM) Process Engineer to drive for Process Stability in defect reduction activities. You can pursue your passion in semiconductors engineering by utilizing cutting-edge and intelligent operating systems to assist with data analytics and inspection sampling strategy while staying under cycle time constraints. You will work closely with product and process owners to create and manage projects that address wafer and line yield issues.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line defect abnormality escalation, handling and disposition
• Render support in Production ramp-up, New process implementation and process characterization for project success
• Evaluate and implement productivity projects for DM Production, Tool and Cost index improvement
• Define and deploy inspection tool recipes BKM to ensure detection capability
• Assist in Customer audits on inspection strategy deployment and execution
  Perform baseline defect improvement

Qualifications

• Possess at least a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Able to think critically with strong investigating skills
• Possess good communication skills
• Possess good time management skills as well as a strong sense of commitment
• Prior leadership or competition experience in school activities will be an advantage
• Candidates with at least 2 years of relevant prior working experience

• Marine Civil Engineering
• Basic $4000 + $5000
• 5.5 days (8am-5pm/12pm)
• Office: Bukit Batok
• Working location: Project based

Responsibilities:

• Oversee daily vessel operations, including movements, documentation, and compliance.
• Manage ship and cargo documents, procurement, and maintenance requests.
• Submit monthly reports and assist with claims like demurrage and cargo shortages.
• Improve ship efficiency and oversee sea staff deployment.
• Maintain records and planned maintenance documentation.

Requirements:

• Diploma / Bachelor’s degree in Marine & Offshore Engineering, Mechanical Engineering, or a related field.
• Knowledge of international maritime regulations and environmental standards.
• Minimum 1 years hands-on experience with vessel operations, maintenance, or technical troubleshooting.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS.
• Change Management, including review new and implemented changes, chair CAB, review change schedule, maintain dashboard, prepare comms.
• Incident Management, including analysing trends, incident workarounds, monitoring aged incidents.
• Major Incident Management, including communication, being part of the Incident Repsonse Team, managing suppliers
• Problem Management, including chairing any problem meetings, managing active problems, highlighting new problems.
• Release Management – liaising with the testers, vendor, tracking features and defects
• Service Request Management – documenting processes, analysing trends, identifying service improvements, working with teams to design new processes
• Continual Service Improvement – being able to highlight areas of improvement for effectiveness and efficiency
• Service Reporting
• ServiceNow – to assist with the day-to-day management of the tool, including working on incidents and requests

Technical Skills & Qualifications Required:

• Good knowledge of ITIL
• Good knowledge of ServiceNow
• Good knowledge/experience of using the Microsoft suite, specifically including SharePoint , Visio and Excel
• Exposure to/familiarity with automation

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 3-5 years of relevant working experiences.
• A good team player.
• Excellent interpersonal skills.
• Excellent verbal and written communication skills, and ability to communicate with different audiences and write a range of document types – procedures, comms, training modules.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Sound problem solving and investigative skills.
• Desire to follow best practice and development standards as agreed within IT.
• Keen to learn new skills.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Key Responsibilities

• Take charge of facility MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Mechanical Engineering or related field.
• 300mm fab facility mechanical system operating experience, especially Exhaust / Chiller / PCW & Clean Room Systems.
• Good written and verbal communication skills in English.
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

AIDRIVERS is paving the way to revolutionize mobility with advancing robotics and automotive technology in industrial applications making it; efficient, safer and smarter.

In this role, you will collaborate with our team of world-class engineers and researchers with diverse backgrounds in areas such as robotics, mechatronics and autonomous navigation software stack.

Responsibilities Includes:

• Awareness and knowledge of sensors, communication technologies, or control devices for various automation solutions

• Use of appropriate communication protocol such as Ethernet, CAN Bus and wireless

• Design, develop, or implement control logics or algorithms for electromechanical or pneumatic devices or systems

• Conduct studies to determine the feasibility and performance benefits of new mechatronic systems

• Calibrate sensors, automated systems, control systems, or system components to maximize efficiency of automation

• Consider safety, reliability and accuracy of the system at all times

• PLC programming for embedded logic programming

• Design Unit, Integration and Regression test cases

• Test commissioning and result documentation and reporting using appropriate means

Skill set required:

Essential:

• BSc/ Eng level or higher qualification or above in mechatronics engineering from a respected organisation

• 2+ years’ experience in the field.

• Experience and understanding of CAN, Ethernet and other communications technologies

• Experience of controller programming languages: structural or ladder logic

• Able to understand electrical systems and schematics

• Familiarity / working with sensors and sensor calibration

• Good English spoken and written skills

• Desire to learn and improve all the time

Desirable:

• Experience and working knowledge of automotive systems

• Experience / knowledge of hydraulic and pneumatic systems

• Experience of programming languages C, C++

• Experience IFM PLC

Job Capsule

In accordance with established policies, procedures and standards, is responsible for the activities related to an assigned organizational element, program, project or task. Will normally plan, conduct and supervise engineering design reviews and analysis assignments involving a major project or several smaller or less complex projects. These projects by nature of their complexity and difficulty require the fully competent application of conventional knowledge in a particular field of engineering or scientific field. Project work and assignments may be broad in nature requiring ingenuity and cross functional coordination.

Job Duties/Roles

1. Provides day-to-day leadership of Engineering staff assigned. Assigns projects to Engineers and monitors the progress of all assigned projects. Ensures the delivery of high quality service and maintenance of good customer relations.

2. Devises new approaches to problems encountered and makes recommendations for changes in methods, procedures or design where necessary.

3. Monitors the technical quality, content, consistency, continuity and timeliness of action of all assigned projects.

4. Applies intensive and diversified knowledge of engineering principles and practices in broad areas of technical responsibility. Performs engineering reviews and analyses when necessary. Reviews other engineers' work and provides appropriate guidance and training when necessary.

5. Participates in the development and changes of Rules. Advises assigned staff in matters related to the application of Rules and Regulations.

6. Prepares written response to clients in accordance with established procedures.

7. Maintains liaison with other engineering specialists internally and externally.

8. Monitors the performance, development potential and training needs of engineers assigned. Keeps management informed of manpower needs.

9. Develops or assists in the development of qualification statements, proposals, bids and other presentation materials.

10. Implements and maintains the ABS Health, Safety, Quality & Environmental Management Systems within assigned area of responsibility.

11. Prepares accurate billing to clients.

Knowledge, Skills and Abilities Required (KSAR)

1. Should have advanced practical industry related experience.

2. Knowledge of related technical disciplines.

3. Knowledge of applicable Rules and Regulations and impact of Rule applications and interpretations.

4. Knowledge of company business policies and procedures.

5. The human relations skills necessary to maintain positive client contacts and provide leadership and motivation to subordinate staff and peers.

6. Ability to effectively communicate orally and in writing.

7. Ability to identify, analyze and solve complex or unique engineering problems.

8. Ability to undertake short- and long-term planning to provide for efficient and effective scheduling of work assignments.

9. A working knowledge of the ABS Health, Safety, Quality & Environmental Management Systems (internal candidates only).

Are you curious about the advancement of technology that enable millions of devices to be created on a single silicon chip the size of your finger? Are you pursuing to become a wafer fabrication expert in a fully integrated process chain? Look no further as UMC Process Integration Engineer position is the perfect fit for you.

UMC Singapore is expanding its production capacity and will build the first 22-nanometer production line in 'Garden City' Singapore. We are looking for Process Integration Engineer to maintain customer production by ensuring stable wafer quality and on-time wafer delivery through process integration and daily management. This position provides excellent opportunities for growth and development.

Responsibilities

• Introduce customer's new product to FAB and support in new product's tape out procedures to ensure pilot success.
• Improve new Product yield and ensure mass production inline, WAT and CP yield stable
• Define standard operation procedure for daily job
• Co-work with module engineers to solve production related issues. (inline, WAT, yield and reliability...)
• Co-work with module engineers to develop customized process to meet customer special requirement

Qualifications

• Possess at least a bachelor's degree in Electronic Engineering, Electrical Electronic Engineering, Physics, Material Science
• Study in specialized in wafer chip or related semiconductor course
• Possess good communication skills
• Possess good time management skills as well as a strong sense of commitment
• Semiconductor device process engineer background is preferred
• Semiconductor foundry experiences is preferred

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

• Marine Civil Engineering
• Basic $3000 + $6000
• 5.5 days (8am-5pm/12pm)
• Office: Bukit Batok
• Working location: Project based

Responsibilities:

• Coordinate maintenance activities for facilities and equipment to ensure optimal performance and minimal downtime.
• Ensure machinery and equipment (e.g., gensets, excavators) operate effectively to meet production needs.
• Manage tasks and resources across maintenance and logistics teams to achieve operational targets.
• Enforce safety measures during operations and address challenges to maintain efficiency.
• Lead daily tasks, including reporting and issue resolution.

Requirements:

• Diploma in mechanical engineering or related.
• 1-3 years of experience with excavators, heavy machinery, and equipment.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

• Marine Civil Engineering
• Basic $4000 + $6000
• 5.5 days (8am-5pm/12pm)
• Office: Bukit Batok
• Working location: Project based

Responsibilities:

• Plan construction schedules and coordinate activities to meet project timelines.
• Monitor and report on-site and off-site progress, preparing regular updates for consultants and clients.
• Analyze project specifications and drawings, including civil/structural, architectural, and M&E details.
• Supervise construction activities, ensuring safety compliance and maintaining a clean work environment.
• Organize site inspections, toolbox meetings, and safety briefings with relevant personnel.
• Attend meetings with clients and prepare necessary submissions (e.g., RFIs, MS, RA, SWP, shop drawings).
• Maintain project documentation and ensure compliance with ISO standards.

Requirements:

• Diploma / Bachelor’s degree in Civil Engineering.
• 1-3 years of experience in infrastructural or marine construction.
• Preferred experience in dredging, reclamation, or nearshore construction.
• Knowledge of construction methods, materials, and BCA regulations.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

Responsibilities & Duties:

• Provide on-site services for new and existing customers, including equipment servicing and upgrades.
• Conduct technical analysis of product implementations, modifications, and enhancements to products in accordance with specific customer specifications.
• Update customer on the nature of service provided and recommends equipment repairs or system upgrade.
• Troubleshoots technical issues and recommends solution to customer.
• Provides technical analysis of equipment installation, modifications, and upgrade in accordance to customer’s requirements.
• Regular communication with customer to ensure high level of customer satisfaction.
• Duties includes but not limited to equipment installation, servicing, maintenance, repair, and relocation.

Requirements & Skills:

• ITE / Diploma in Electrical or Mechanical Engineering.
• At least 2 years on site experience preferred.
• Experience in Automation and/or Robotics preferred.
• Knowledge and experience in using Solid Works and PLC programming will be an added advantage.
• Good problem solving and communication skill.
• On the job training provided.

Responsibilities & Duties

· Identify and develop potential new customers

· Provide support and further develop existing customers.

· Marketing, promoting and selling of products.

· Provide advice on best solution and product to customers.

· Analyse competitors and market trend.

· Prepare quotations.

· Meeting of sales target and plan.

· Perform other duties as assigned.

Requirements & Skills

· Minimum Diploma in engineering, preferably Robotics and Automation.

· Minimum 2 years of experience in technical sales.

· Strong communication and sales skill.

· Good knowledge of industrial automation systems / equipment.

The Rapid Response Damage Assessment (RRDA) program is seeking an Engineer or a Senior Engineer to assist with the modeling and analysis of vessel stability and hull strength for ships and offshore floating structures and verify their compliance with applicable Rules and Regulations.

· The RRDA program provides 24/7 technical assistance to ship and offshore floating structure related emergencies such as grounding and collision. When activated, RRDA is an extension of the vessel management team’s own response capability, focusing on the measure of changes occurring to hull strength, stability and the extent to which risk of pollution can be mitigated. This new position is expected to work along with a group of experienced engineers to respond to client service requests when emergencies occur or participate in routine vessel emergency response drills.

The RRDA work by nature of its complexity and difficulty require the fully competent application of conventional knowledge in a particular field of engineering or science. Through broader and more technically challenging work assignments, the ideal candidate will develop a thorough understanding of policies, methods and procedures.

What You Will Do:

• Under the supervision of an experienced engineer or the RRDA manager, develop analysis models and perform detailed engineering analyses to assess vessel stability and hull strength and verify their compliance with applicable Rules and Regulations.
• Perform work which involves conventional engineering practices but may include complex problems such as the resolution of limited information provided by the client, conflicting client requirements, or time constraints.
• Develop technically accurate and timely reports, and responses to client phone calls, emails and other forms of communication for review by an experienced engineer or the RRDA manager.
• Prepare accurate and timely weekly reports and billing on all work performed.
• Communicate the status of the current workload to all appropriate members of the team to meet the needs of clients.
• Standby for and respond to client service requests on the rotating shift
• May propose technical advice to field operations and other technical offices.
• May propose new approaches to problems encountered and make recommendations for changes in methods, procedures or designs.
• May work directly with clients to identify and resolve problems in the area of technical expertise.
• Work as a team member within the RRDA response team. May work autonomously, once trained, with limited supervision.
• Implements and maintains ABS Quality System requirements relative to responsibilities after undergoing ABS Quality System training.

What You Will Need:

Education and Experience

• B.S. degree in Naval Architecture, Ocean Engineering, Civil or Structural Engineering, or other related disciplines.
• Experience (coursework, research, or industry experience) with vessel stability calculations and ship and/or offshore floating structures is preferred
• Experience with stability software and/or salvage software such as Hecsalv, GHS, or NAPA is a plus.

Knowledge, Skills, and Abilities

• Knowledge of related technical disciplines required.
• The ability to identify, analyze and propose solutions to problems (i.e., the competence to demonstrate complex problem-solving skills).
• Good command of the English language.
• Ability to communicate orally and in writing.
• Ability to work well with others and sometimes within tight schedules

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom