Key Job Accountabilities :

· Set-up wet etch and plating processes

· Write process specifications and operator instructions

· Sustain and provide continuous process improvement through planning, evaluating, verifying and executing procedures to ensure that products meet all customers’ requirements in terms of cost, yield and cycle time

· To provide interim and long-term corrective actions for any discrepancies

· Liaise with customers & potential customers on development & improvement of process, material and equipment capabilities

Required Experience and Qualifications :

· Requires Degree in Physics, Chemical, Material Science, Electrical/Electronics Engineering or equivalent

· Minimum 2 years of relevant experience in wafer bumping or wafer fabrication technology in wet etching chemistry, and/or Plating technology

· Ability to work on 12-hour rotating shifts or swing shift if required

Our client is a global manufacturer. Due to business needs, they are now recruiting a Customer Quality Engineer to be part of their Quality team for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsibility of Customer Quality Engineer:

• Analyze and apply customer quality specifications, developing and upholding internal quality benchmarks through APQP methodologies (e.g., Process Flow Diagram, Control Plan).
• Facilitate Built-in Quality workshops, ensuring collaboration with cross-functional teams to achieve and monitor continuous improvements through to completion.
• Lead initiatives to resolve quality issues for new programs (such as Process of Record, Process Change Request, First Time Quality) to enhance performance.
• Chair Material Review Board meetings to address deviations and spearhead corrective actions for non-conformance cases.
• Obtain customer approval for Production Parts and provide support for the initial stages of production.
• Promptly address customer returns by utilizing Six Sigma problem-solving techniques and the 8D approach.
• Capture and document lessons learned for each new program and apply these insights to future projects.
• Ensure adherence to the Quality Operating System throughout product launches.

Requirements:

• Min Degree in Engineering related field
• Minimum 3 experience in Quality and Product Launch
• Knowledge in Automotive industry regulations and standards

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Job Summary:

• $3,000 - $4,000
• Mon to Fri - 9 am to 5.30 pm and Sat- 9 am to 12 pm (Only one Sat per month)
• Location: Tuas West Road
• VB

Job Responsibilities:

• Assist the sales team in the execution of the project
• Responsible for coordination & project documentation. Liaise with customers and suppliers on project-related issues
• Coordination work (internal or external) on quality, engineering, delivery and commissioning issues
• All other duties as assigned by the manager

Additional Information:

• Min Diploma or Degree in Mechanical Engineering/ Electrical Engineering / Marine Engineering
• Preferably with project management experience
• Willing to travel overseas by vessel or by flight

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Ong Xinyu Charmaine
Registration Number: R24122875
EA Licence No: 06C2859 (MCI Career Services Pte Ltd)

Your Role
We are looking for an experienced Sales Engineer (Electronic Testing) to develop & identify business opportunities including sales visits, preparation of proposals, products & proposals presentation, contracts negotiation and closing of sales.

What Will You Do

• To develop and identify business opportunities
• To do sales visits, preparation of proposals & closing of sales
• To develop sales strategies for the growth of existing and new accounts
• To market wide range of products and provide customers with solutions
• To meet sales quota set and participate in yearly and periodic budget exercises.

What Do We Want

• At least Diploma/ Degree in Electronic/ Telecommunication / Engineering in relevant fields
• Min 2-3 years of relevant work experience in electronic testing / laboratory fields.
• Good communication skill & has pleasant personality and positive attitude.
• Possess own transport will be advantage.
• Willing to travel.

What Will You Get In Return
You will be given exposure to a hold a key position in a growing organization with attractive rewards and a wide range of benefits. You will entitle a Gross salary up to S$4000 + attractive perks.

What You Need to do Now
Click "Apply" and please include the following information in your resume:

• Personal Particulars with recent photograph
• Education background
• Work experiences in point forms
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

Note:
Only shortlisted candidate will be notified via email for an interview invitation

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Animal Science Care Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Non-Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a QA Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Life Science Medical Devices
• Possess own transport

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Responsibilities

• Develop and maintain software applications using Python and C++, ensuring adherence to best practices in OOP and multithreading.
• Collaborate with the engineering team to design robust, scalable, and maintainable software solutions.
• Assisting clients in establishing comprehensive Application Security programs.
• Perform SAST, SCA, and IAST to identify and address vulnerabilities early in the development lifecycle.
• Ensure all code complies with industry-standard security practices, performing regular code reviews and vulnerability assessments.
• Deploy and manage applications on Google Cloud Platform, leveraging its services for scalability, security, and performance.
• Utilize Docker for containerizing applications, ensuring efficient deployments and consistency across environments.
• Work closely with cross-functional teams to support project goals and deliver high-quality software.
• Troubleshoot issues in a timely manner and contribute to team knowledge sharing on best practices in software security and cloud deployment.

Qualifications

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Minimum of 5 years of experience in IT industry.
• Proficient in Python and C++ with a deep understanding of OOP and multithreading.
• Experience with secure coding practices, including SAST, SCA, and IAST methodologies.
• Experience in creating multiple tool for smooth Integration of CA Service Desk, SMS Gateway with RSA Archer (GRC) and RSA Netwitness (SIEM).
• Familiarity with GCP, including services such as Compute Engine, Cloud Storage, and IAM.
• Knowledge of containerization and orchestration using Docker.
• Experience with Agile development methodologies.
• Familiarity with DevOps practices is a plus.
• Experience with CI/CD pipelines.
• Exposure to Kubernetes for orchestration.
• Additional security certifications or training in application security.

Savita Rai

EA REG NO: R1873418

EA License No:23C2060

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

Responsibilities

• Develop and maintain software applications using Python and C++, ensuring adherence to best practices in OOP and multithreading.
• Collaborate with the engineering team to design robust, scalable, and maintainable software solutions.
• Assisting clients in establishing comprehensive Application Security programs.
• Perform SAST, SCA, and IAST to identify and address vulnerabilities early in the development lifecycle.
• Ensure all code complies with industry-standard security practices, performing regular code reviews and vulnerability assessments.
• Deploy and manage applications on Google Cloud Platform, leveraging its services for scalability, security, and performance.
• Utilize Docker for containerizing applications, ensuring efficient deployments and consistency across environments.
• Work closely with cross-functional teams to support project goals and deliver high-quality software.
• Troubleshoot issues in a timely manner and contribute to team knowledge sharing on best practices in software security and cloud deployment.

Qualifications

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Minimum of 5 years of experience in IT industry.
• Proficient in Python and C++ with a deep understanding of OOP and multithreading.
• Experience with secure coding practices, including SAST, SCA, and IAST methodologies.
• Experience in creating multiple tool for smooth Integration of CA Service Desk, SMS Gateway with RSA Archer (GRC) and RSA Netwitness (SIEM).
• Familiarity with GCP, including services such as Compute Engine, Cloud Storage, and IAM.
• Knowledge of containerization and orchestration using Docker.
• Experience with Agile development methodologies.
• Familiarity with DevOps practices is a plus.
• Experience with CI/CD pipelines.
• Exposure to Kubernetes for orchestration.
• Additional security certifications or training in application security

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

Responsibilities

Provide Leadership to the Electrical engineering team to comply with project requirements and to meet project schedules.
Lead and prepare overall concept.
Lead, prepare, & review Request for Quotations (RFQs) and specifications. Lead EPC tender as the lead for Electrical.
Review technical proposals from OEMs to ensure compliance to our design requirement.
Plan & Manage the Electrical Master document List.
Plan & Manage manpower loading.
Review cable routing, BOQ, lead engineers and drafters.

Lead the engineering design of the following activities:
Design of 230kV, 66kV, 6.6kV & LV power supply system including; Sizing of Power Generation System, transformer, UPS & DC systems.
Articulate the overall Single Line
Understand & explain Power system Analysis by ETAP
Understand & explain Protection coordination
Calculate Cable Size
Understand & explain HV, MV and LV distribution & motor starter system
Understand & explain UPS & DC system
Understand & explain Solar generation system
Understand & explain Power Management System
Plan & coordinate Electrical Room layout
Understand, explain, plan & coordinate Cable and Busduct Management System

Familiar to the following Equipment and System;
Steam/Gas turbine generator
EDG (Emergency diesel generator)
GCB/TCB/UCB
GSUT/UAT/AT
MV/LV VSDs
IPBD/SBPD/LV Busduct
HV/MV/LV Switchgear and MCC
Civil interface for switchboard installation, pull pit and penetration.

Requirements

At least 10 years of relevant experience as Leader or Senior Electrical Engineer in EPC project for Power, Petrochemical and/or Waste-to-Energy plants
Bachelor’s degree in electrical engineering or equivalent
Strong background in EPC projects Strong leadership & people management
Familiar with industrial standard, e.g, ISO, IEEE, and etc. and Singapore standard, e.g SS638
Familiar with statutory Regulation or Code, like Singapore transmission code. etc.
Able to work in collaboration with various disciplines
Able to interface seamlessly with engineering, construction, and operations contractors

Able to work on-site in construction environment

Work location: Tuas Nexus

1. Application Support: Provide first and second level technical support to end-users of the projects’ applications, troubleshooting and resolving issues in a timely manner.

2. Incident management: Monitor and manage the application support queue, ensuring that issues are logged, triaged, and resolved within the defined SLAs.

3. Root Cause Analysis: Perform root cause analysis on application issues, identifying the underlying cause and proposing solutions to prevent recurrence.

4. Release Management: Participate in the deployment of new application releases, ensuring that they are properly tested and deployed in accordance with the change management processes.

5. Maintenance: Work with the vendors team to ensure that applications are properly maintained and updated to meet changing business requirements.

6. Documentation: Create and maintain documentation related to the applications, including standard operating procedures, and troubleshooting guides.

7. Collaboration: Work with other IT teams, such as infrastructure, database, and security, to ensure that applications are properly integrated and secured.

8. Process Improvement: Identify areas for process improvement within the application support function, proposing and implementing changes to improve efficiency and effectiveness.

9. Training: Provide training to end-users and other IT staff on the use and maintenance of the applications.

Senior Network Engineer / Senior Network Consultant

Our Esteemed and Reputable Client is looking for a Senior Network Engineer / Senior Network Consultant.

Requirements:

• Proficient in handling Network Infrastructure.

• Good in Network LAN, WAN administration and configuration.

• Proficient in LAN/WAN Systems, Routers, Switches, Firewalls, Servers, Storage, Backup, Operating Systems and applications.

• Experience in Enterprise Network Management.

• Experience in System and Network configuration and troubleshooting.

• Good in System,Windows, Server Configuration and Administration.

• Possess CISCO Certifications (CCNA, CCIE, CCNP)

• Strong in liaising with Stakeholders, Clients and Business Users.

• Min. 5 years of Network management experience.

• Min. Diploma/ Degree in any related discipline.

• Strong communication and persuasion skills

*** Junior roles are available for candidates with less than 6 years of Network experience.

We respect your privacy and all communication will be treated with confidentiality.

Applicants who are not shortlisted may be considered for other similar positions.

If you have meet the job requirements that we are looking for or wish to find out more on this role, please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Responsibilities

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

Team Intro:

TikTok's testing platform team, provides technical support for various businesses that need to write and manage automated tests. Mainly including:

The full stack of platform portals and test management functionalities.

The test scheduling system.

The testing framework and solutions.

Job description:

- Responsible for the full stack of the test management platform used by QA engineers.

- Responsible for the internal test framework used by QA and RDs for automated testing on Web and in-app pages (Android, iOS).

- Responsible for the full stack test scheduling platform.

- Responsible for functionality, stability and efficiency of overall test automation solutions in various R&D teams.

Qualifications

-Bachelor's degree in Computer Science, Software Engineering, or a related field. Master's degree is a plus.

- Proficient in JavaScript/ Typescript , CSS , HTML, DOM / BOM , network protocol and other front-end related technologies, have in-depth experience in at least one of the mainstream front-end frameworks (React/ Vue /Angular, etc.) and understand the implementation principle

- Have development experience under Linux, have a certain understanding and experience of MySQL database, message system, cache system

- Good product awareness, service awareness, sense of responsibility, project driving force, can be independent

-Problem-Solving: Exceptional problem-solving skills with a track record of analyzing complex technical challenges and providing innovative solutions.

-Communication: Excellent communication skills, with the ability to effectively convey technical concepts to both technical and non-technical stakeholders.

-Leadership: Strong leadership experience, including team management, mentorship, and technical guidance.

-Agile Mindset: Familiarity with Agile/Scrum methodologies and a history of delivering high-quality software in an Agile environment.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Job Scope:

• Read and understand the Engineering and Stage drawings
• Understand all GD&T symbols to be able to read apply for CNC programming.
• Create the Offline CNC programs using UG NX 7.5/8.5/10 and above for Aerospace components
• Component prove out on Machining, Turning and Turn mill and 5 Axis centres
• Readout CNC codes including probing cycles for program creation
• Simulation using Vericut software and beginner level knowledge on Machine and Control building in Vericut
• Strong fundamental knowledge in Manufacturing Engineering
• Generate 3D models using NX

Job Requirements:

• Read and understand the Engineering and Stage drawings
• Understand all GD&T symbols to be able to read apply for CNC programming.
• Offline CNC programs using UG NX 8.5/9/10 and above for Aero engine and Structural components is mandatory
• Knowledge of Team centre functions will be
• Should be proficient enough to generate 3D models using NX
• Optimization in Programming and machining techniques
• Awareness of aerospace quality requirements

Summary :

• Basic up $2500
• 5 days, 815am-6:00pm
• Entry Level are welcome to apply, training is provided
• Industry : Manufacturing/Electrical & Electronics
• Company with great career growth

Job Scope :

• Lead and manage a team in testing low-voltage switchboards and power distribution boards.
• Ensure all testing checklists are accurately completed and signed off.
• Create and deliver training on safety, testing, and troubleshooting for new employees or products.
• Conduct Factory Acceptance Tests (FAT) and Factory Witness Tests (FWT) with clients, following the Method of Statement (MOS).
• Manage the calibration, defect reporting, and maintenance of tools and equipment in the Testing Department.
• Provide input to the Quality and Project Management Teams as needed.

Job Requirement:

• Candidates with related experiences and background studies are welcome to apply

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

Responsibilities:

· Perform design and development of PLC programs and interfaces

· Perform system integration and testing to ensure excellent quality assurance

· Conduct site testing and commissioning at clients’ sites

Requirements:

· Degree/Diploma in electrical/mechanical engineering or equivalent

· 2-3 years of PLC programming experiences; preferably in process industry applications

· Good knowledge with SCADA applications will have added advantage

· Good knowledge with common PC software and applications will have added advantage

· Team player with good interpersonal skill

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

At NUS Singapore, our people are the driving force behind our success. We pride ourselves on fostering a vibrant and inclusive community of talented individuals from diverse backgrounds.

When you join NUS, you become part of a community of passionate individuals who are dedicated to driving innovation and change in education, research, and service. Our culture of inclusivity and entrepreneurship means that you’ll have the freedom to explore your ideas and make a meaningful impact. Your career at NUS is more than just a job - it’s a transformative experience that will shape your personal and professional growth.

Explore the link provided to learn additional details about the available job opportunity:

https://career44.sapsf.com/sfcareer/jobreqcareer?jobId=1832&company=nationalunP2

**Job Title:** Engineer

**Industry:** Engineering

**Years of Working Experience:** 1-3 years

**Summary:**

We are seeking a motivated Engineer with 1-3 years of experience in the field of engineering. The ideal candidate will be responsible for designing, developing, and maintaining various engineering projects while ensuring high-quality standards and adherence to project timelines.

**Key Responsibilities:**

1. Collaborate with cross-functional teams to design and develop engineering solutions.

2. Conduct research, analyze data, and provide recommendations for project improvements.

3. Create technical documentation and reports to communicate project progress and outcomes.

4. Participate in testing, troubleshooting, and resolving technical issues as they arise.

5. Ensure compliance with industry regulations and standards in all engineering activities.

**Required Skills and Qualifications:**

1. Bachelor's degree in Engineering or related field.

2. 1-3 years of experience in an engineering role.

3. Proficiency in engineering software and tools.

4. Strong problem-solving and analytical skills.

5. Excellent communication and teamwork abilities.

6. Ability to manage multiple projects simultaneously.

7. Knowledge of industry regulations and standards.

If you meet the above requirements and are passionate about engineering, we invite you to apply for this exciting opportunity to contribute to innovative engineering projects and make a meaningful impact in the industry.

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

**Job Title:** Engineer

**Industry:** Engineering

**Years of Working Experience:** 1-3 years

**Summary:**

We are seeking a motivated Engineer with 1-3 years of experience in the field of engineering. The ideal candidate will be responsible for designing, developing, and maintaining various engineering projects while ensuring high-quality standards and adherence to project timelines.

**Key Responsibilities:**

1. Collaborate with cross-functional teams to design and develop engineering solutions.

2. Conduct research, analyze data, and provide recommendations for project improvements.

3. Create technical documentation and reports to communicate project progress and outcomes.

4. Participate in testing, troubleshooting, and resolving technical issues as they arise.

5. Ensure compliance with industry regulations and standards in all engineering activities.

**Required Skills and Qualifications:**

1. Bachelor's degree in Engineering or related field.

2. 1-3 years of experience in an engineering role.

3. Proficiency in engineering software and tools.

4. Strong problem-solving and analytical skills.

5. Excellent communication and teamwork abilities.

6. Ability to manage multiple projects simultaneously.

7. Knowledge of industry regulations and standards.

If you meet the above requirements and are passionate about engineering, we invite you to apply for this exciting opportunity to contribute to innovative engineering projects and make a meaningful impact in the industry.

· Station at construction site

· Overall project planning, scheduling, monitoring and updating to meet project completion targets.

· Proficiency in English and Mandarin is mandatory to liaise with Mandarin speaking Customers and Colleagues

· Able to communicate and liaise well with main con and RTO / RE

· Handling technical and engineering issues.

- Doing feasibility assessments and site inspections.

-Making recommendations or presenting alternative solutions to problems.

· Liaison and meeting with client's representatives, relevant authorities

· Proficient in Microsoft Office

· Proficient in Autoca

**Job Title:** Engineer

**Industry:** Engineering

**Years of Working Experience:** 1-3 years

**Summary:**

We are seeking a motivated Engineer with 1-3 years of experience in the field of engineering. The ideal candidate will be responsible for designing, developing, and maintaining various engineering projects while ensuring high-quality standards and adherence to project timelines.

**Key Responsibilities:**

1. Collaborate with cross-functional teams to design and develop engineering solutions.

2. Conduct research, analyze data, and provide recommendations for project improvements.

3. Create technical documentation and reports to communicate project progress and outcomes.

4. Participate in testing, troubleshooting, and resolving technical issues as they arise.

5. Ensure compliance with industry regulations and standards in all engineering activities.

**Required Skills and Qualifications:**

1. Bachelor's degree in Engineering or related field.

2. 1-3 years of experience in an engineering role.

3. Proficiency in engineering software and tools.

4. Strong problem-solving and analytical skills.

5. Excellent communication and teamwork abilities.

6. Ability to manage multiple projects simultaneously.

7. Knowledge of industry regulations and standards.

If you meet the above requirements and are passionate about engineering, we invite you to apply for this exciting opportunity to contribute to innovative engineering projects and make a meaningful impact in the industry.