*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Draftsman executes the activities within own area of responsibility, ensuring the compliance with the QA/QC and HSE

requirements. Tasks include:

A-Development Technology know how and Commercial support

B-Feasibility

C-Bidding phase/Commercial proposal development

D-Project Execution (Job progress and completion)

▪ Perform 2D drawings developed for electrical system design (single line diagrams, schemes and wiring diagrams)

▪ Perform 2D drawings developed for electrical system plant design (cable routings, grounding, lighting and tracing) and

substations arrangements

▪ Extract 2D drawings from the 3D model (cable routings and sections, grounding layouts, lighting layouts, etc.)

▪ Extract material quantities from the 3D model

▪ Implement electrical system installation details in 3D plant model (cable routings, supports, equipment)

▪ Participate to 3D modelling plant review

▪ Implement electrical load list and cables schedule in software tools

▪ Implement electrical materials take off (MTOs) in software tools

▪ Implement bill of quantities (BOQ) for electrical system installation in software tools

E-Construction and start up

▪ Review as built the technical documentation

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Designer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE

requirements. Tasks include:

A - Development Technology know-how and Commercial support

B - Feasibility

C - Bidding phase/Commercial proposal development

▪ Prepare Instrumentation bulk material quantities (BOQs and MTOs) for cost and erection works estimates

▪ Support Discipline Lead to define man hours and cost estimates

D - Project Execution

▪ Review Client technical documentation and requirements

▪ Follow-up subcontracted engineering activities and control subcontracted engineering documents

▪ Apply engineering design basis and guidelines

▪ Prepare the technical documentation for Instrumentation bulk material requisitions and prepare, according to internal

procedures, the technical evaluations

▪ Provide technical support to Project Team

▪ Optimise Instrumentation bulk material design ensuring minimal cost and complexity in compliance with the contractual and

safety requirements

▪ Prepare Instrumentation bulk material technical specifications

▪ Prepare Instrumentation installation drawings

▪ Prepare Instrumentation BOQs and MTOs

▪ Perform Instrumentation 3D modelling design activities and participate to 3D Modelling reviews

E - Construction and start up

▪ Provide technical and engineering support to construction Team

▪ Perform site engineering activities during construction and commissioning phases.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is in the Waste management industry.

About the role:

• Products / Systems Manage product life cycles including new products and accessory configuration updates.
• Create and maintain solution and product catalogue to support commercialization. Actively support new project proposals when new offers are needed for pre-sale and bidding requirements.
• Focus on Product and system Application Development for Southeast Asia and China, including technical understanding and application of engineering solutions, a variety of industrial equipment / components going into the solutions, system automation know-hows, and digitization trends. At the same time, finding local alternatives to address cost and delivery needs.
• Co-operate with Partners in each market for New Product Application development. Technically source from qualified partners. Manage confidentiality, IP and Business cases.
• Handle Product & Technical Complaints and provide On-site Services to support project teams if needed.
• Set up database with product catalogue to track in Projects – what new products used in what projects, lessons learned, recommendation for future projects, wish list for new products.
• Carry out market research in each country with insightful intelligence, analyse, and formulate into product market competition strategies to integrate into product development plan.

Design (Team with 3 designer)

• Standardize design fundamentals, identify gaps to improve.
• Lead and Work with design team in each office to proactively design into opportunities and ensure design accuracy with local needs.
• Establish proactive Relationship with Influential Project Consultants and design houses for Technical Spec-in. Track such leads as a KPI to drive for pipelines with business leaders.

Commercial / Cross functional Co-responsibilities

• Define choices of products / solutions for commercial team to choose from to meet market demand.
• Define product plan for each year by working with cross functional team.
• Collect customer demands with and through commercial team to solution specifications to enable new product development. Provide timely technical Supports to commercial team to remove product barriers.
• Implement strategic pricing practices while collaborating with Sales and management to strive for balanced decision.
• Carry out Regular On-site Examinations for Key Projects to validate new product functionality and existing product and system function issues (feedback from team) and provide improvements.
• Work with market communication team and R&D to design Product promotion scheme, provide training for sales, distributors and customers. Participate in and work with the marketing in various academic conferences, exhibitions and other marketing activities.
• Align with Global product strategy and information sharing representing the region. Make and update sales tools related to products. Be the regional owner to link global initiatives for product introduction and launching champion with support from market communication.

Sales Support

• To attend technical review with sales team
• To attend technical meetings with clients

Project Support – HDB (Before Main Contractor)

• To attend coordination meetings with architects, m&e and structural consultants
• To coordinate and determine the level of pipe sleeve crossing under major roads
• To coordinate the level of pipe sleeve with major services such as sewer, power cables, etc
• To determine the position and depth of launching pits that will aid the installation under major roads
• To study and highlight authority requirements during the meeting.
• To reply to HDB review form
• To reply to NEA BP, DC, WD Advise
• To produce preliminary drawings to aid the tender process for main contractor
• To prepare drawings for PWCS QP endorsement
• To prepare drawings for Acoustic Consultant’s specifications
• To prepare drawings for MV provisions to be designed by MV consultant

Project Support – HDB (With Main Contractor)

• To attend technical meetings with main contractors
• To coordinate pipe clashes with m&e and structural services

Design Support

• To generate fabrication drawings for non-standard equipment
• To monitor project design submission schedule
• To allocate work assignments to other designers
• To check designs, shop drawings done by other designers
• To hold trainings to designers

About you:

• Bachelor’s or master’s degree in automation, mechanical engineering or relevant fields.
• More than 8 years product and application experience in Construction/Engineering industry.
• Good business negotiation and presentation skills.
• Excellent communication skills with local and western customers and colleagues.
• Good leadership to lead technical team to enable faster business growth.
• Proper flexibility and agility.
• Goal and results oriented.
• Able to work independently with professional judgments, proactivity and team player spirit.
• Willing to take up challenging assignments with such track records.
• Revit & AutoCAD

Other information:

• Work location: Central
• Working days: Mon-Fri, 9am to 6pm

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

About our client: Our client is a leading global pharmaceutical manufacturing company.

*This role will be hired on a 1 year contract to support our client's project, with possible extension / renewal*

About the role:

• Demonstrate the ability to lead technical projects from concept through implementation in collaboration with the Process Engineering team.
• Perform activities such as incoming goods inspection (IGI), FAT/SAT, and installation verification for new equipment and modifications to existing equipment.
• Assist with the execution of qualification protocols for IQ and OQ.
• Support all phases of engineering project implementation to ensure alignment with scope, schedule, budget, quality, and safety requirements.
• Be capable of reading and understanding PCS7 Functional Specifications, ensuring they are fit-for-purpose and aligned with business needs.
• Coordinate with the Automation team, as well as with manufacturing and MSAT teams, for improvements or implementing changes related to software FAT.
• Collaborate with engineering consultant firms and process engineers to support and complete tasks within the schedule for new and modified equipment, including:
  o Reviewing P&IDs, standard detail drawings, URS, etc.
  o Involving in Factory Acceptance Testing (FAT) of all process equipment, when applicable.
  o Coordinating inspection site installation of new equipment upon delivery.
  o Reviewing Vendor Turnover Packages and Construction Trade Turnover Packages.
  o Reviewing functional specifications.
  o Participating in Software FAT using PCS7, if applicable.
  o Assisting in commissioning and qualification of new or modified equipment in Cell Culture or Downstream (Purification) areas, including reviewing and executing C&Q documents.
• Target delivery of results on the first attempt.
• Adhere to applicable Environmental, Health, and Safety (EHS) requirements.
• Commit to maintaining fair and respectful relationships with others and behaving according to the company's code of conduct.
• Perform other duties as assigned by process engineering team members or management.

About you:
• 3 to 5+ years of experience in Upstream/Downstream bioprocess operations and demonstrated experience in equipment design within the pharmaceutical/biopharmaceutical industry.
• Experience in an engineering role supporting cGMP operations in a pharmaceutical/biopharmaceutical manufacturing plant is highly desirable.
• Experience in the design and operation of biopharmaceutical manufacturing equipment and facilities.
• Experience in the management and coordination of engineering and construction management consultants, equipment vendors, and contractors.

Key Skills and Competencies:
• Process and equipment knowledge of biological drug substance manufacturing processes; expertise in downstream unit operations is highly preferable.
• Knowledge/experience in change control management and deviation investigation & closure.
• Understanding of equipment commissioning, various stages of qualification, and process activities.
• Thorough knowledge of current Good Manufacturing Practices (cGMP) and Good Engineering Practices (GEP).
• A solid understanding of design principles and standards within biopharmaceutical facilities.
• Strong knowledge of sanitary design aspects of biopharmaceutical manufacturing equipment.
• Ability to communicate effectively, both in writing and orally, at all levels.

*Please note that only shortlisted candidates will be contacted.*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Duties & Responsibilities:

• Routine patrolling and clocking to ensure safety and security
• Respond to emergency incidents/accidents at site
• Manage disorderly conduct and threatening behaviour
• Observe, inspect, and report unusual behaviour or safety/fire hazard
• Manage driveways to ensure smooth flow of traffic
• Monitor CCTV
• Crowd Control

Requirements:

• Minimum 1 year of working experience in related field
• Rotating day and night shift work (including weekends and public holidays)
• Able to communicate and write simple English for recording daily incidents
• Positive working attitude
• Possess valid security license registered with PLRD
• Completed WSQ Security modules in:

a) Handle Security Incidents and Services

b) Provide Guard and Patrol Services

c) Recognise Terrorist Threat or equivalent

• Only Singaporeans / Permanent Residents

Package:

• Gross: $2400 to $2800
• AWS & annual variable bonus
• Lunch provided
• Medical benefit

About our client: Our client is a leading global engineering and project management consultancy embarking on large-scale infrastructure and environmental projects.

*Please note that this role will be hired on a long-term contract to support our client's project.

*Work Location: West

*Salary range: $6,000 - $7,200

About the role:

· Lead the site supervision team on all the Civil and Structural and Building Construction works.

· Assist Chief Resident Engineer and Construction Manager on all Civil & Structural site inspection issues, contract related matters and support the identification of defects and supervise rectification works.

· Address and respond to all Contractor’s RFI’s and technical submittals. Other work scopes include but not limited to assess method statements/instrumentation reading, coordinate with other discipline engineers and liaise with design team/QP from HQ.

· Attend all site/project related meetings, discussions with clients and/or Contractors and to lead in technical and work progress discussions.

About you:

· Good graduate Degree in Civil & Structural Engineering, preferably recognised by the PE Board, Singapore.

· Minimum 10 years of construction experience in supervising civil and structural works in water/used water treatment works.

· Registered with IES as Resident Engineer (Civil).

· A person with good communication and leadership skills.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading international chemical manufacturing company.

About the role: The Production Engineer is responsible for improving the production technology of the upcoming plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures, and operation condition sheets in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, troubleshooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utility consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grades, new processes and equipment with the Production Technology Engineer.
• With a feasibility study, optimize plant operating efficiency, yield optimization, and energy conservation. Then, conduct the necessary field tests to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measures for customer complaints in a technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ findings and recommend modification, improvement, and potential investment projects such as debottlenecking, and environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with the technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked-up P&IDs and the required technical information for cost estimation purposes.
• Coordinate with the Technical department all plant improvement and modification activities working closely with the Technical Process engineer to prepare detailed
• engineering design, preparing specifications and requisitions for major equipment purchases, reviewing vendors’ documents, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with the Technical department for regular updates of P&ID’s, and instrument list, and equipment list.
• Communicate with the global process improvement team to build synergy for further technical updates of new plant.

About you:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.
• Demonstrated skill to in leadership, developing others, and working in a team-based environment.
• Outstanding verbal and written communication, presentation, interpersonal, creative thinking, consulting, and analytical skills.
• Excellent communication skills
• Ability to prioritize work to manage multiple projects to meet deadlines.
• Excellent problem-solving/decision-making skills.
• Ability to multi-task

Preferred qualifications:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction processes, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programing and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

*Please note that only shortlisted candidates will be contacted

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading international chemical manufacturing company.

Work Location: Jurong Island (company transport provided)

About the role:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of:

(a) daily maintenance [preventive, corrective, & breakdown maintenance],

(b) transition maintenance,

(c) turnaround maintenance and

(d) upgrading and improvement related to maintenance

• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s
• HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability
• objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.

About you:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.
• An aptitude for and interest in chemical process
• Analytical skills
• Ability to work well under pressure
• Good communication skill and able to collaborate with different functions
• Problem-solving skills

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Job Position: Vessel Accountant (Ship Management)

Key Responsibilities:

Vessel Accounting:

• Prepare the Monthly Vessel Owners Report, Fund Requests, and Variance Reports to provide detailed financial insights.
• Assist vessel owners by addressing their queries and concerns in a timely manner.
• Handle vessel owners requirements and ensure challenges are met accurately.
• Calculate monthly vessel associated costs.
• Support the implementation of new accounting software to improve financial operations.
• Oversee vessel disbursements and manage intercompany reconciliations.
• Prepare Quarterly GST reports for accurate tax compliance.
• Ensure Month-End Closing procedures are completed accurately and timely.
• Assist in the implementation of systems and initiatives to minimize manual processing and increase operational efficiency.

Accounts Payable (AP) / Accounts Receivable (AR):

• Supervise Accounts Payable functions, ensuring proper processing of invoices and addressing any challenging situations.
• Prepare Year-End Accruals and Audit Schedules to ensure financial records are prepared for year-end reviews.
• Approve Corporate Invoices within the system, ensuring accuracy and compliance with company policies.
• Handle the closing of prepayments in the accounting system.

Corporate Accounting:

• Manage and oversee the Annual Statutory Audit and related taxation matters.
• Execute Month-End Activities including Bank Reconciliations, posting of Journal Entries (JVs), accruals, and necessary adjustments.
• Prepare and present Management Reports to provide insights into financial performance and trends.
• Handle Intercompany Reconciliation and settlement processes to ensure accurate financial records.

Requirements

• Minimum 5 years of relevant experience in vessel accounting. Preferably in Ship Management.
• Strong proficiency in Microsoft Office Suite (Excel, Word, PowerPoint) with advanced Excel skills, including data analysis, financial modeling, and reporting.
• Experience with accounting software such as Abatech and SEE System.
• Detailed oriented and able to work in fast paced environment with deadlines and goals
• Good written and interpersonal communication skills
• Committed and meticulous individual with great team bonding skills
• Proactive communicator

As an Engineer (Facilities Management & Engineering), you will assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements. Specifically, you will develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations. Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

Requirements

- Bachelor’s degree in Mechanical Engineering/ Facilities Management with a minimum of 2 years of relevant experience

- Prior training in management roles and supervisory experience of maintenance services for healthcare buildings and facilities would be advantageous

- Exposure to Heating, Ventilation, and Air Conditioning trades­ is preferred

- Excellent interpersonal and communication skills

- Self-motivated with the initiative to complete tasks and projects assigned

About our client: Our client is a leading chemical manufacturing company that is expanding their exsiting operations in Singapore.

About the role: The Chemist is part of the pioneer team in the startup of the new production line, the Chemist is responsible for setup of QC Laboratory at new site, including management and training of Laboratory analyst, Laboratory system establishment and management to achieve safe and stable commissioning and startup of the new plant.

Work Location: Jurong Island (company transport is provided to and from Jurong East MRT station)

Responsibilities:

• Interpret laboratory results that are outside of the technical ability of the Lab Analysts.

• Review all process and final product test results to check for validity and possible quality-related issues.

• Assist quality lab manager in classification for final product and compounding lots.

• Assist quality lab manager to develop and implement QC specifications and standards.

• Assist quality lab manager to establish lab system according to HSEQ requirements.

• Conduct method development and validation, review and upkeep SOP of test procedures, calibration procedures and analytical instruments.

• Analyse, review and troubleshoot reliability issues of laboratory equipment and analysis problem and develop practical solutions.

• Liaise with vendors to troubleshoot and maintain laboratory equipment.

• Develop, implement, and follow calibration plan for equipment to ensure lab data is always accurate, consistent, and repeatable.

• Manage lab external agency audits and management systems certification compliance.

• Support Manufacturing, Quality, Sales, and Product Management functions.

• Assist lab manager, production, or other departments with special projects, as needed.

• Lead Special lab Projects and new grade trials.

• Implement and participate in safety and quality improvement activities.

• Evaluates reported results for consistency with plant process conditions.

• Trains laboratory personnel on new instruments and procedures as needed.

• Conduct internal audits on the proper execution of test methods.

• Liaise with Supplier, execute procurement process and receipt.

• Monitor and follow up on daily lab analysis result for accuracy and troubleshooting.

• Task as assigned by QC Manager.

About you:

• A bachelor's degree in chemistry or related field.

• Minimum 5 years’ experience in analytical lab with manufacturing facility

• Ability to work well under pressure in a fast-paced environment.

• Experience required in new Laboratory set up, system establishment.

• Experience required with GC, ICP, GC-MS, Antek, KF, IR, UV, Extruder, DSC etc.

• Experience required in statistical process control and statistical quality control.

• Experience preferred in polymer testing and analytical techniques.

• Extended knowledge of computers and software applications (i.e. Microsoft Office, spreadsheets, databases, NWA, etc.)

• SAP & LIMS experience preferred.

• Very strong oral and written communication skills

• Self-motivated and detail oriented

• Ability to multitask and prioritize work.

• Strong problem-solving, critical thinking and analytical skills.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About the role: Our client is a leading chemical manufacturing company that is expanding their existing operations in Singapore.

Work Location: Jurong Island (Company transport is provided to and from Jurong East MRT station)

About the role: The Day Technician is responsible for overseeing Heat Treatment daily operations, supporting the shift team with grade change maintenance activities, and ensuring smooth day shift operations.

Responsibilities:

• Manage the daily operations of the Heat Treatment unit, ensuring that quality, safety, and production capacity meet the production plan.
• Lead and support GCM transition activities for the HT facility, ensuring that cleaning tasks are completed efficiently and meet company standards before being handed over to maintenance.
• Communicate operational issues to the maintenance team and collaborate closely with maintenance contractors and coordinators to address them.
• Assist the shift team in various operational tasks, including off-spec PVA blending, chemical loading/unloading, chemical preparation, and GCM cleaning.
• Report to both the shift supervisor and day supervisor to ensure that daily operations are carried out safely and in compliance with requirements.
• Perform any other duties as assigned.

About you:

• NITEC or Diploma in Chemical Process Technology

• At least 3 years’ working experience as Process Technician in a chemical industry

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is in the Construction industry.

About the role:

• To interpret drawings and perform taking off duties
• To source sub-contractors and suppliers
• To prepare tender submission
• To liaise with sub-contractors and suppliers for quotation and procurement
• To coordinate with consultant and sub-contractor for progress claims, variation works and finalisation of accounts
• All other tasks as assigned by management

About you:

• Diploma in Quantity Surveying, Building, Construction Management related.
• Minimum 1-3 years relevant working experience in Quantity Surveying for renovation and A&A Works.
• Possess knowledge of local form of contracts (eg. PSSCOC, SIA etc)
• Proficient in MS Office applications.

Other information:

Work location: Woodlands

Working days: Monday to Friday (8.30am – 5.30pm)

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

About our client: Our client is a leading chemical manufacturing company that is expanding their existing operations in Singapore.

Work Location: Jurong Island (Company transport is provided to and from Jurong East MRT station)

About the role:

• To Coordinate maintenance activities between the Production and Technical departments and assist with GCM/SDM MA & MO activities.
• Support work permit and authorization processes.
• Attend daily operation and maintenance meetings to provide updates on progress and maintain alignment with planned activities.
• Oversee all maintenance tasks, including safe permit issuance, lockout-tagout preparation, GSAP approval, and assisting relevant teams to ensure successful completion of maintenance work.
• Prepare equipment for the transition from maintenance to commissioning, ensuring that all tasks are completed effectively.
• Support Capital Projects/MOC activities, ensuring that blanking, isolation, LOTO, and flushing procedures are followed for safe handling.
• Collaborate with Maintenance Engineers during the planning and commissioning stages of transition and turnaround activities.
• Prepare markup PIDs for all GCM activities during the transition period to ensure safe and timely start-up.
• Work with shift team supervisors to ensure maintenance tasks, such as cleaning, washing, and follow-up jobs by technical or in-house contractors, are completed before handing over to production.
• Assist with work permitting and work authorization activities.
• Perform other duties and assignments as directed by supervisors.

About you:

• Relevant experience in the chemical industry.
• Diploma or degree in a relevant field.
• A minimum of 2-3 years' experience in maintenance planning and coordination.
• Strong communication and teamwork skills.
• Ability to work independently and collaborate effectively with all levels of the organization.
• Proficient in MS Office applications (Word, PowerPoint, Excel).
• Strong time management skills with the ability to prioritize tasks effectively.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading chemical manufacturing company that is expanding their existing operations in Singapore.

About the role:

The Senior Lab Analyst is a key member of the pioneer team for the startup of the new production line, assisting the Chemist in setting up the QC Laboratory at the new site. This includes training Laboratory Analysts, establishing laboratory systems, and managing operations to ensure the safe and smooth commissioning and startup of the new plant.

Key Responsibilities:

• Conduct quality analysis on raw materials, intermediates, and final products.
• Accurately interpret and report test results in a timely manner, following specified test methods.
• Assist in troubleshooting technical issues related to equipment and analysis processes.
• Support the establishment and maintenance of lab systems, including equipment validation and calibration.
• Maintain quality documentation and develop quality procedures.
• Provide training to Laboratory Analysts and Process Technicians on analysis instrumentation procedures.
• Manage and maintain chemicals, reagents, and consumables.
• Assist in the procurement process and ensure inventory is up to date.
• Implement and optimize analytical processes and equipment workflows.
• Participate in safety and quality improvement initiatives.
• Perform other tasks as assigned by superiors.

About you:

• Diploma in Chemical Process Technology or Science related field.

• Min 5years experience in analytical laboratory environment.

• Hands-on experience with GC, ICP, Titration and polymer testing equipment.

• Hands-on experience with equipment calibration and reagent preparation.

• Ability to multi-task in a fast-paced environment.

• Strong analytical and problem-solving skills, detail oriented.

• Strong commitment to safety and quality.

• Ability to work without direct supervision.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is in the Construction industry.

About the role:

• Support the Tender Team by Interpreting Contract Drawings, Measurement of Quantities, preparing Bill of Quantities, Interpretation of Specifications and to Request for Information and Clarification.
• Source for Sub-Contractors/Suppliers, request for quotations, build-up tender base cost and to prepare tender proposal for Management review.
• Attend site briefing to compile all the documents required for tender submission.
• All other tasks as assigned by the Management.

About you:

• Diploma in Quantity Surveying, Building, Construction Management related.
• Minimum 1-3 years relevant working experience in Quantity Surveying for renovation and A&A Works.
• Possess knowledge of local form of contracts (eg. PSSCOC, SIA etc)
• Proficient in MS Office applications.

Other information:

Work location: Woodlands

Working days: Monday to Friday (8.30am – 5.30pm)

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

About the role: Our client is a leading chemical manufacturing company that is expanding their existing operations in Singapore.

Work Location: Jurong Island (Company transport is provided to and from Jurong East MRT station).

About the role:

The Production Engineer (HSE) is responsible for overseeing daily operations and project safety, ensuring compliance with all safety regulations, and driving continuous safety improvements. This role involves managing risk assessments and ensuring occupational safety standards are met.

Responsibilities:

• Lead daily operations as an HSE Production Engineer, ensuring safety across both daily operations and construction projects at the site.
• Manage the HSE aspects of operations, including risk assessments, Hazop studies for new modifications, changes to operating procedures, and site construction activities.
• Review and identify high-risk activities in the process operations based on Hazop studies, and hold regular meetings with the production manager to develop plans for improving safety in these high-risk areas.
• Work closely with production and logistics teams to ensure safe work procedures are followed in the process operations.
• Review and prioritize safety observation feedback based on risk levels, following up through the MOC process. Ensure improvement actions are tracked with records and timelines.
• Collaborate with project engineers, production teams, and maintenance coordinators to ensure safety-related projects are executed and completed on time.
• Review emergency and disaster prevention procedures, ensuring they are up to date and aligned with current operations.
• Lead and drive any additional HSE improvement projects or activities.
• Perform any other tasks or duties as assigned by superiors.

About you:

• Experience working in the chemical industry
• In-depth understanding of safety legislation and regulations within the chemical sector
• Diploma or degree in Engineering, Health, Safety, or Environmental studies
• Proficient in Microsoft Office applications
• Strong written and verbal communication skills
• Excellent organizational abilities
• Strong analytical skills with the capacity for critical thinking

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is the in the oil&Gas industry.

About the role:

• Conduct and perform general equipment testing, maintenance, and repair work
• Execute tasks/activities, standard maintenance, and repair work such as Preventive, Corrective maintenance project executions at the site effectively & efficiently
• Ensure all site executions are performed in accordance with all maintenance work procedures / OEM manuals/company standards to ensure site quality, asset integrity and operability
• Ensure all site executions are performed in accordance with all Local Statutory and Company Safety processes to achieve good safety records/results
• Report any problems or issues with site facilities
• Process Permit-to-Work, Job Safety Analysis (JSA), Lock-out, Tag-out (LOTO) or execute the Defeat of Safety Critical Equipment (DOSCE) during associate maintenance activities
• Participate and contribute to maintenance documentation reviews such as Safe Work Procedures (SWP), Job Safety Analysis (JSA), and What-If Analysis
• Maintain work progress status and report to Supervisors on a daily or ad-hoc basis
• Perform Work Executor in the Computerized Maintenance Management System (CMMS) workflow to receive, update and close up assigned Work Orders and checklist
• Supervise contractors in work order execution and mentor, and guide technicians/junior technicians
• Support the Maintenance Supervisor in ensuring that contractors or third-party vendors execute maintenance tasks/activities at the site effectively and efficiently
• Ensure that contractors carry out tasks/activities that adhered to safety, health, and environmental regulations and company standards
• Assist Maintenance Supervisor/Engineer with Capex project execution
• Help out in the supervision of Capex project execution
• Perform equipment or system testing/commissioning / Inspections / Pre-Startup Safety Review (PSSR) to properly handover to the Operations team after maintenance/project completion
• Participate in routine safety drills, work orders, troubleshooting, and failure analysis
• Standby as duty technician for emergency activation to perform corrective maintenance after working hours
• Suggest and execute ideas for continuous improvement in maintenance procedures and processes to improve or optimize maintenance costs, work processes, and safety standards
• Assist to lead equipment training to the Operations dept or new trainees
• Maintain inventory and housekeeping
• Practice good housekeeping
• Assist to maintain spare parts inventory levels, support delivery checks by suppliers, and maintain good preservation/housekeeping in the store

About you:

• ITE or Diploma equivalent in maintenance
• 3 years of relevant maintenance experience in a similar industry
• Familiar with and experience in Maintenance and inspection work
• Familiar with and experience in terminal equipment and assets
• Technically sound
• Familiar with terminal equipment and assets
• Familiar with terminal fire-fighting and emergency procedures
• Knowledge of safety, health and environment regulatory and practices
• Compliance with regulatory requirements

Other:

• Work location: Jurong Island (transport provided at Jurong East)
• Work hours: Monday to Friday (8.30am to 5.30pm)

*Please note that only shortlisted candidates will be contacted.

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

At Henkel, you can build on a strong legacy and leading positions in both industrial and consumer businesses to reimagine and improve life every day. If you love challenging the status quo, join our community of over 47.000 pioneers around the globe. Our teams at Henkel Adhesive Technologies help to transform entire industries and provide our customers with a competitive advantage through adhesives, sealants and functional coatings. With our trusted brands, our cutting-edge technologies and our disruptive solutions, you will have countless opportunities to explore new paths and develop your skills. Grow within our future-led businesses, our diverse and vibrant culture and find a place where you simply belong. All to leave your mark for more sustainable growth.

Dare to make an impact?

YOUR ROLE

• Drive implementation of Portfolio Management initiatives across Henkel Adhesive Technologies
• Take ownership for end-to-end responsibilities to identify business problems, analyze root causes and interdependencies, develop solutions and implement them
• Collaborate with different stakeholders on scouting the key business problems, shaping them into actionable projects ensuring necessary change management
• Support transitioning of the Henkel Adhesive Technology organization to data-driven decision-making via developing the Adhesives Data & Analytics platform
• Participate, drive definition and execute the Product & Technology Management strategic change agenda in collaboration with Adhesive Technologies and corporate functions and enable the key use cases (e.g. value-based pricing, value selling etc.)

YOUR SKILLS

• Minimum 5 years experience in Product Management, Marketing, Strategy, Application Engineering or related area with proven track record of self-driven transformational achievements and completed projects, leadership experience is a plus
• Analytical skills including understanding of relevant technologies, brands, applications, product profitability and good knowledge of financial models
• Familiar in technical IT literacy incl. SAP knowledge, PowerBI and other data analytics and visualization applications
• Strong presentation, communication and influencing skills to various audiences and key business stakeholders in both virtual and real settings
• Self-driven individual with open minded and performance oriented attitude with customer centricity mindset
• Fluent English language skills

At Henkel, we come from a broad range of backgrounds, perspectives, and life experiences. We believe the uniqueness of all our employees is the power in us. Become part of the team and bring your uniqueness to us! We welcome all applications across different genders, origins, cultures, religions, sexual orientations, disabilities, and generations.

About our client: Our client is in the Marine Offshore industry.

About the role: This position requires travel between Singapore and Taiwan for project needs.

The Technical Solution Specialist will play a crucial role within the commercial/business development team. This position is responsible for developing technical solutions for bidding projects, creating technical method statements and drawings, and delivering comprehensive services and equipment solutions.

Technical Solution Development:

• Collaborate with the commercial/business development team to develop innovative and competitive technical solutions for bidding projects.
• Prepare detailed technical method statements, drawings, and integrated service and equipment solutions to meet project requirements.

Bid Review and Analysis:

• Thoroughly review and understand bidding employer’s requirement documents, project specifications, and process data.
• Translate employer requirements into effective contractor solutions that align with project goals.

Market Monitoring and Adjustment:

• Continuously monitor market trends and adjustments to ensure tender documents remain competitive and relevant.
• Implement improvements in the tender process to enhance the company’s market position and competitiveness.

Cross-Department Collaboration:

• Work closely with various department stakeholders to gather necessary information for bidding proposals.
• Consolidate and integrate collected information into comprehensive bid proposals.

Internal Reporting and Management Approval:

• Conduct detailed internal reporting of tender solutions to secure management approval for bid submissions.
• Provide timely and accurate updates on bid progress to the tender manager.

Commercial Bid Support:

• Support the tender manager in developing commercial bid solutions and engaging with the market as required.
• Participate in market visits to assess and incorporate subcontractor solutions into the company’s proposals.

Subcontractor Solution Review:

• Evaluate subcontractor technical solutions to ensure alignment with project requirements and company standards.
• Integrate subcontractor solutions into the company’s bid proposals effectively.

About you:

• Minimum Diploma or Bachelor’s Degree in Engineering, or a related field.
• Prior experience and knowledge in offshore projects are highly desirable and will be given preference.
• Proven experience in technical solution development, preferably within a commercial/business development context.
• Strong understanding of bidding processes, tender documentation, and market trends.
• Excellent analytical skills and attention to detail.
• Effective communication and collaboration skills to work with cross-functional teams.
• Ability to manage multiple projects and meet tight deadlines
• Willing to travel overseas for project needed.

Other information:

Work location: Jurong East

Working days: 5 days work week (Monday to Friday - 9am to 6pm)

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

About our client: Our client is an EPC contractor in the Marine industry.

About the role:

• Quantity measurement of the following trades:

- Structural works.

- Piping works.

- Electrical and instrumentation works.

- Mechanical and equipment works.

- Painting works.

• Reconcile MTO with the client.
• Monitoring changes on-site with production teams. It could be identified in the following:

- Design drawing changes.

- Site instruction from Client.

- Job Confirmation Sheet from client.

- Identification of Changes (IOC) from Production Team.

- Confirmation of Verbal Instruction (COVI) from Production Team.

• Compiling change proposal register.
• Preparation & submission of change proposal to Client for approval.
• Reconcile with Client on the change proposals submitted.
• Project Costs Control:

- Design drawing changes

- Monitoring periodically on the increased or decreased in works scope.

- To handle any Commercial Claims (i.e. Extension of Time, disputed claims, etc)

• Contracts Management:

- To ensure that our works & costs are in-line with the contract.

- Able to identify variance arises in the contract.

- To manage any disputed items.

About you:

• Degree in Civil Engineering, Quantity Surveying or relevant courses
• Min 3 years of experience in QS
• Able to handle full-scope of QS duties which includes material take-off and variations

Other information:

• Work location: West (company transport is provided in selected MRT stations)
• Working days: 5 days works week (Mon-Fri, 8am to 5.30pm)

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

Location: Changi

Working Hours: 8am - 8pm (6days work week)

Salary: $2750

Responsibilities:

- Conduct inspections to ensure flight kitchens comply with safety and hygiene standards.

- Load meals onto aircraft according to cabin loading plans, ensuring accurate and timely delivery to the correct flights.

- Use flight catering information systems to retrieve and manage detailed food order requirements.

- Operate designated vehicles for transporting meals to and from aircraft while adhering to strict safety and handling protocols.

- Assemble meal trays and portion meals accurately, ensuring compliance with presentation and dietary specifications.

- Monitor and record meal temperatures to maintain health and safety compliance.

Requirements:

- A minimum requirement of a Nitec or any professional certificate in Catering, Hospitality, or a related field.

- Basic knowledge of food hygiene and safety standards is essential to ensure the health and safety of airline passengers.

- Strong organisational skills are necessary for managing the preparation and loading of meals onto aircraft efficiently.

- The ability to work under pressure and in a fast-paced environment, meeting tight deadlines for flight schedules.

- Good communication skills for interacting with colleagues and following precise instructions from flight catering plans.

- Physical stamina and the capability to work in different temperature conditions, especially in cold storage areas.

- Familiarity with operating kitchen equipment and vehicles for transporting food to aircraft.

The candidate will be part of MHC Project Management Office & Business Solutions and will be assigned to lead business requirement gathering in various projects or system enhancements. This is a hands-on role which requires understanding of Insurance & Healthcare process and system, strong analytical skills and a high level of accuracy when defining business specifications

Key Responsibilities:

• Liaise with end users to produce/refine business specifications (Business Requirement Document)
• Liaise with Sales, Operations, Finance, and IT teams to ensure accurate functional coverage
• Define and produce testing plan and provide guidance in user acceptance testing (UAT)
• Manage and escalate risks and issues to management (Issues, Risks & Action Management)

Competencies:

• Business oriented with a clear focus on results and deliveries
• Strong business acumen; keen to understand and quick to identify risks and opportunities.
• Be creative, innovative, pro-active, and convincing in terms of finding solutions
• Strong communication and presentation skills both verbal and written.
• Experiences in operations or IT project environment.

Requirements:

• Good knowledge in Apps, Webs, and mobile technology (prefer but not mandate)
• Degree in Information System, Computer Science, or professional certificates in relevant fields
• At least 3 years of working experiences in related fields
• Prefer with insurance, TPA or healthcare background

Key Summary

The incumbent will be responsible to develop a volunteer management strategy and framework to foster strategic and sustainable collaborations with individuals and corporates to support the Foundation’s vision and mission. Manage the end-to-end volunteer management programme from recruitment to retention.

Key Responsibilities

Planning and Operations

• Develop a robust framework including recruitment and retention strategies, and risk management
• Review, enhance and implement volunteer management policies, processes and best practices (e.g. recruitment, training, deployment, development, recognition, engagement)
• Curate and co-curate volunteering opportunities with individual programmes
• Monitor, review and evaluate volunteers’ performance and outcomes of volunteering opportunities

Marketing and Outreach

• Plan, develop and manage all marketing and communications to drive recruitment and outreach efforts
• Identify and drive effective partnerships with schools, corporates, grassroots and other organisations
• Study emergency trends and behaviours to improve the volunteering experience with the Foundation
• Regular engagement with volunteers and timely acknowledgement, recognition, and appreciation

Administrative

• Manage in-house volunteer database to ensure up-to-date and accurate records
• Manage and maintain an up-to-date library of resources and material such as policies, forms, training packs and volunteer handbook etc
• Update and manage database of volunteers to ensure accurate and up-to-date records
• Any other duties assigned by the Director, Community Relations

Key Requirements

• Minimum Degree in related fields with 5 - 8 years of working experience and track record in volunteer management from planning to operations, and preferably with working knowledge in marketing and communications
• Possess knowledge of the NCSS Volunteer Management framework and the use of data in VMS/CMS
• An expert in project management, process improvement and strategic stakeholder engagement both in the corporate and individual levels
• Strong critical thinking, analysis and problem-solving skills
• Multi-tasker with the aptitude to adapt to multiple priorities and changes
• Creative, resourceful, proactive and well-organised

Salary range is indicative and commensurates with qualification and experience.

We sincerely regret that only shortlisted candidates will be notified.

Job Responsibilities:

· Manage the daily operations of assigned facilities, including maintenance, security janitorial services and office systems.

· Manage facility budgets, ensuring that expenses are within budgetary parameters and track capital expenditures

· Oversee the planning and execution of improvement projects, including renovations and equipment upgrades

· Negotiate and manage vendor contracts, ensuring that all work meets quality and safety standards

· Administer the maintenance data and records for management report

· Develop and maintain positive relationships with internal stakeholders and external partners

Job Requirements:

· Degree/Diploma in Engineering/Technical or related field

· At least 3 years of working experience in facilities management

· Self-starter, good interpersonal and communication skills with a positive mindset

· Strong project management skills with the ability to prioritize and manage multiple sites/projects simultaneously

· Excellent analytical and problem-solving skills with the ability to make decisions and develop creative solutions to complex problems