Total 1,613 mechanical engineer job vacancies in Art / Design / Entertainment category in Singapore

about the company

My client is a leading manufacturer of digital electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career

about the job

• Design and realization of the chip floorplan, clock architecture and powerplan
• In charge of physical design tasks from netlist to GDSII (P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout)
• Lead analog designs during product development
• Physical design methodology of advanced process nodes and builds an automatic physical design platform

skills & experience required

• PhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics Engineering
• Min 4 years of hands on / research experience with digital backend ICs circuit design / physical design
• Well versed with synthesis, place & route, STA and design convergence
• Willing to work in a new start up entity in Singapore
• Proficient in tapeout experience at advanced technology will be a plus
• TCL,Perl,Python script development and familiar with EDA tool design

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

• Ensure efficient Civil & Structural and Geotechnical design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical design matters and advises the Senior Resident Engineer (SRE) / Senior Design Engineer (SDE) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical submission and assists the SRE/SDE in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and technical support as required in the evaluations of Contractor's claifications.
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirement

• Minimum Degree in Civil/Structural Engineering or equivalent
• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works
• Team player with good interpersonal and communication skills.

Responsibilities:

• Prepare, check and approve electrical drawings and documents
• Manage and lead a small team of engineers and drafters to fulfil project schedule and address technical issues raised by clients and other stakeholders
• Review vendor drawings and documents
• Evaluate technical proposals from vendors and suppliers to ensure technical compliance
• Provide engineering support throughout the project to multidisciplinary sections, procurement, project team, site production team, commissioning activities etc.
• Perform engineering design work including electrical calculations for cable sizing, equipment sizing, voltage drop calculations, etc.
• Participate and witness FATs, inspections, tests, sea trials, etc.
• Organize and chair meetings with clients and stakeholders to address technical queries and discussion in order to meet project contractual specifications and class requirements
• Assist in the administration, coordination, liaison between all stakeholders

Requirements:

• Min Diploma/Degree in Electrical/Power Engineering
• Experience in Electrical Design and or switchboard design is an advantage
• Electrical Marine experience is also advantage

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

End-to-end rollout/implementation services of Optics or IP Routing or FN nodes, including any relevant tasks/activities, towards Nokia and the clients of Nokia.

Lead successful rollout/implementations, meeting timelines and budget requirements

Coordinates and prioritizes project tasks, manages timelines, maintains project plans and communicates status to Project Manager, Senior Management and clients as needed

Ensuring the project is implemented within contractual obligations and regulatory requirements

Responsible for managing multiple client projects at one time and be responsible for participating in internal projects, as needed

Ability to detect potential issues and implement solutions when issues threaten to delay the timeline

Working closely with design & NMS team

Ensure customer satisfaction through follow up, client responsiveness, and thorough communication

Local installation material planning, ordering and management

Preparing timeline/schedule for I&C

Site audit (HSE & Quality) and joint visit for Implementation with customer as required

Weekly reporting for site rollout

Responsibilities:

• Full responsible for Netlist-to-GDS physical design implementation of 12nm/6nm/4nm and below advanced process chips.
• Block owner, take block of 2~3 Million instances, working on Synthesis/APR(auto place and route)/Signoff
• Block coordinator role for more than 5~10 blocks, solving the critical issue and give the solution to block owners.
• TOP role for the complicated hierarchical chip (more than 20 Million instances plus 500+ macros), doing floorplan and partition, responsible for full chip tapeout

Requirements:

• Bachelor/Master Degree in Electrical/Computer Engineer.
• Experience in physical design with tape-outs.
• Knowledge of complete Netlist-to-GDS flow, Synopsys/Cadence tools like ICC2 or Innovus.
• Good in script programming with Perl, TCL/TK or other languages.

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.


Responsibilities

• Manage enterprise systems, emphasizing cyber security, and troubleshoot reported issues
• Coordinate with technology vendors for necessary escalations and conduct patching and updates for tools and systems
• Generate incident reports, maintain records of service level agreements for customers, and upkeep detailed technical documentation

Requirements

• Extensive background in Operations Support
• Proficient in McAfee, Cisco, Microsoft, and Thales
• Ability to manage and execute projects in endpoint security, data loss prevention, and vulnerability management

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg


Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

• Well Established Company
• Basic $3000 - $4000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Serangoon
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Design and develop plastic parts, molds and molding processes
• Design and develop engineered plastic parts, insert molded parts and assemblies
• Design necessary components
• To design mould based on customer specifications and requirements
• Develop 2D & 3D solid mold designs
• Analyse and interpret data and create new product designs
• Analyse manufacturing data and suggest improvements
• Ensure quality output of molded components
• Review existing validation reports
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma / Degree in Engineering or relevant qualification with minimum 2 years engineering experience in a manufacturing setting; including state of the art manufacturing technology/concepts and cost reductions
• Experience in using engineering/design software, Auto CAD
• Knowledge in CAD/CAM and Unigraphic software

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Contribute to building and maintaining data systems or pipelines.
• Perform setup, installation, configuration, troubleshooting, and upgrades for COTS products.
• Develop and implement improvements for data warehouses, data lakes, or equivalent platforms.
• Participate in creating documentation, including design documents and troubleshooting guides.

Requirements

• Possess knowledge and/or hands-on experience in data management or data engineering.
• Demonstrate proficiency in Linux commands, shell scripting, and various programming languages.
• Experience with relational databases and NoSQL databases, data integration tools such as Talend, DataStage, Denodo.
• Familiarity with data/search/automation platforms and analytics tools such as Hadoop, Elasticsearch
• Analytics platforms such as Databricks, Dataiku, Data Robot
• Knowledge and/or practical experience with Microsoft Azure Cloud services such as Azure Data Factory, Azure Synapse Analytics

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Your Role

We are looking for a Design Quality Assurance Engineer to prepare the compliance of documents an oversee new product development stages and implement standardization of the new product design and development.

What Will You Do

• To prepare the compliance of documents, oversee new product development stages and implement standardization of the new product design and development.
• To take part in important nodes of every stage in the new products or projects, such as design review, design verification and design confirmation.
• To keep track of the progress of designing in the new products or projects, including design, materials, assembly, debugging, and promote closed-loop implementation.
• To assist all projects and promote the standardized transfer to technical data and documentation.
• To provide input and overview to support program implementation from a quality perspective, and attend internal program reviews or status meetings.
• To do inspection on the new products or projects, ensuring the standardization of shipment inspection, inspection plan formulation, and shipment inspection implementation.
• To provide on-site customer service by following up and solving problems of the first machine shipped out.
• To perform any ad-hoc duties assigned by the management.

What Do We Want

• At least a Degree in Quality, Industrial, Mechanical Engineering or equivalent.
• At least 4 years of experience in Quality management or equipment, panel or semiconductor Wafer Industry will be preferred.
• Strong knowledge in basic quality methods and tools, QC Methods, 5WHY, 8D, 4M1E, FMEA and etc.
• Have experience in the basic operation mode and promotion ideas of DQA and APQP related in automotive industry will be added advantage.
• Have good understanding in the general Quality Management Systems like ISO90001/14001/18001.
• Strong logical analysis and project management skills.
• Good interpersonal and communication skills.

Job Description

• The Design Engineer is responsible for day-to-day design and engineering activities.
• He/She shall handle design independently and take up responsibilities to deal various for authorities like BCA/CSC, ST and follow up with site until Top/ CSC.
• He/She shall attend project meetings with other consultants /clients / authorities.
• He/She shall be responsible to site design issues and site visits.
• He/She has spent significant years on the job and acquitted technical knowledge and skills relating to the design of residential, industrial and infra structures related projects.
• The Design Engineers expertise is essential to his/ her responsibilities to provide technical guidance to his/her team and lead projects of oderate complexity or less routine in nature.
• The design Engineer should have knowledge on Euro Code regulations.
• Should have knowledge on concrete and steel structural design
• Should able to work in STAADPro
• Willing to work late hours and site offices are required and Go site visit along with PE and supervise activities on requests.

• Examine Structural Drawings provided by consultants.
• Support the Design Manager in overseeing consultants during both the Tender stage and Site implementation phase.
• Conduct initial structural design analysis / conceptual design to aid in Tender costing. Aid the project and operation teams in resolving structural design challenges.
• Ensure adherence to design procedures in accordance with the OHSQ Management System.
• Plan and manage design tasks and schedules to ensure timely and accurate production and approval of shop drawings.
• Communicate with clients regarding design details of shop drawings and suggest alternatives when necessary.

Requirement:

• Minimum 5 years experiences in shop drawings preparation for large scale projects.
• Candidate must prossess Professional Engineers Board recognized Degree in Civil/Structure Engineering with relevant design working experience
• Familiar with Auto CAD software and knowledge in BIM software will be an added advantage

Reg no. R1659970

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities:

• Lead projects for infrastructure operations, including Service Desk, Windows/Linux environments, VMware, and storage systems.
• Contribute to solution design and engineering in areas like Service Desk, Windows/Linux operations, VMware, and storage.
• Support VMware 6.x and above, specializing in vSphere, vRealize Operations, and Horizon.
• Collaborate with Information Security for compliance with audit requirements.
• Design and implement disaster recovery solutions and redundant technology.

Requirements:

• Demonstrated success in implementing comprehensive technology systems for corporate business operations.
• Extensive proficiency in technology, including design, delivery, and support.
• Preferred expertise in VMware and Microsoft.
• Proficient in utilizing PowerCLI scripting for both reporting and automation.
• Essential understanding of networks, switches, and SAN, with additional advantageous hardware knowledge.
• Preferably experienced in applying ITIL practices.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

The Senior Design Engineer is responsible for structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the work place.

Value Add of Position

• Design and calculation report for reinforced concrete, steel and geotechnical works using British Standards and Eurocode.

Technical Competencies

• Technical expertise and knowledge in Foundation, Structural and Civil works.

Qualifications and Education Requirements

• Minimum Degree in Civil Engineering from accredited Universities
• Prior 6 years of experience in design and construction (structural). Preferably have done data centre, marine offshore, and mixed-development projects.
• Have completed a data center project
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software
• Well versed in Autocad and BIM software is preferred

Job Requirements

· Lead Process Design Engineer for the Process Design of Storage Terminals, Process Units in Refineries and Chemical Plants which involves the Basic and Detail Design including the preparation of PFDs, P&IDs, System Description, Process Control Philosophy, Hydraulic Calculation, Heat Transfer Calculation, Heat & Material Balance, Relief System Calculations, Utility Consumption, Equipment data sheets & Instrument data sheets.

· Prepare Technical Proposals including preparation of PFDs, P&IDs, hydraulic calculations and system description.

· Design Calculations for Pumps, heating coils, Thermal Relief valves and Tank venting calculations.

· Analyze pressure relief design scenario and calculate the relief load and validate the results

· Prepare Process Data Sheets for Instruments, Equipments & Tanks.

· Review other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc.

· Participate in HAZOP and SIL study, Review HAZOP Report and prepare HAZOP & SIL Close-out reports.

· Participate in P&ID Design Review and Process Control Philosophy Review, and prepare review Close-out reports.

· Design of Fire Protection System as per NFPA for the Storage Terminal, which includes Tank Farms, Pump Stations, Jetties, Truck Loading Bays

· Design of wastewater collection and disposal system for the Storage Terminal which includes Tank Farms, Pump Stations, Jetties, Truck Loading Bays

· Prepare Surge Analysis report using Pipenet Transient Module.

· Development of automated excel spreadsheets for process calculations.

· Performing Simulation using Aspen HYSYS & Unisim

· Preparation of simulation report & HMB.

· Equipment Sizing and Preparation of Equipment Data sheets.

· Preparation of technical specification in line with the project requirements

· Performing Hydraulic calculation and preparation of Data sheets for control valves.

· Performing Relief load calculation and preparation of Data sheets for safety valves.

· Design of Flare system using Flarenet.

· Utility sizing and Preparation of Utility Consumption report.

· Preparation of Process Control Philosophy & Cause and Effect diagram.

· To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

· To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelor of Engineering (Chemical)

Experience

Preferably 10 years’ experiences

Software Requirements

1) Pipe Net

2) Good proficiency in MS Excel, MS word

3) Smart Plant P&ID

Code Knowledge

1) API 2000, API 520, API 521, API 526, API 2350

2) SS 532

3) NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Be part of a team in creating state-of-the-art Secure Low Power SoC ARM-based SoC/MCU for the Low-End , Mid and High-End performance MCU product line in a IC Design Environment.

Responsible:

• Engage design team and architects to strategies DFT Test plan for SoC top level
• Create DFT test modes, scan architecture, clocking and reset architecture.
• Plan Pin-Muxing and Pad and Boundary scan (BSDL) generation
• Execute JTAG TAP network generation and verification.
• Quality check with Spyglass analysis for scan using spyglass tool
• Execute Scan insertion using DC / Tessent tools
• Deploy Scan constraints development for Atspeed, shift and slow capture mode.
• Generate ATPG pattern generation using synopsys Tetramax tools
• Analyze and report on test coverage metrics to ensure comprehensive testing of designs.
• Implement improvements to enhance test coverage and efficiency.
• Verify No-timing and SDF simulation of ATPG patterns using VCS and NCSim tools
• Implement MBIST MBIST repair and verification using Mentor Graphic Tessent tools.
• Boundary scan verification
• Generate STIL test patterns for tester
• Silicon bring-up and failure debug

Requirements:

• Requires BSc/MSc or PhD in electrical and electronic or Computer engineering
• Requires > 5 years or more of experience in DFT at IP and SoC top level. Proficient at using DC ,tetramax and MG tessent DFT tools
• Tape-out at least 5 chips and tested to pass on tester.
• Requires strong understanding of state of the DFT methodology , flat and hierarchical implement of DFT from IP to SoC top.
• Capable of understanding UPF to enable multiple power domain verification
• Capable of leading, review and guiding younger DFT engineers in their daily tasks
• Able to work in a team with a strong drive to excel
• Able to work independently on a given assignment and work hard to finish on time
• Good written and communication skills

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

The job comes under NPI Operations and supports Product & Test Engineers in test development, product qualification & manufacturing release. Additionally, the job supports production & planning teams to make use of spare capacity for revenue attainment purpose. The scope covers managing Marvell testers, handlers, probers & hardware with focus towards operational readiness and continuous improvement.

What You Can Expect

In this (hybrid/remote/in-office) role in LOCATION, you’ll build transistor level circuits from scratch or be given existing blocks to improve or port. Using a variety of CAD tools, but primarily Cadence, you will build or improve your circuit, simulate different performance metrics and measure other parameters. You’ll do circuit analysis and if your circuit looks good, you’ll send it to layout for physical design. Once it’s created, you get it back, run simulations and tests, and continue iterating until the circuit performs precisely as you need it to. You’ll attend

weekly meetings with your team to discuss your projects at a high level. If any issues arise, the team may take a more focused look at the problem to work out a solution. You’ll also attend meetings with senior designers and managers to review your work at a detailed level. On this team, you’ll have the opportunity to see your designs go from an idea all the way through production and into use by other groups at Marvell.

What We're Looking For

To be successful in this role you must:

- Have completed a Bachelor’s Degree in Electrical Engineering and have 1-3 years of related professional

experience OR a Master’s Degree and/or PhD in Electrical Engineering.

- Your education must show further specialization into Analog Design.

- You must be willing to learn additional aspects of Analog Design from your peers and be willing to share your

knowledge with others as well.

This team collaborates a great deal.

- You must understand the fundamental theory behind circuit design.

- You must have some experience with CAD tools from school. If your school allowed you to use Cadence also,

that’s helpful but not required. You can learn that on the job.

Additional Compensation and Benefit Elements

With competitive compensation and great benefits, you will enjoy our workstyle within an environment of shared collaboration, transparency, and inclusivity. We’re dedicated to giving our people the tools and resources they need to succeed in doing work that matters, and to grow and develop with us. For additional information on what it’s like to work at Marvell, visit our Careers page.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.



Responsibilities

• Specify requirements and features for semiconductor equipment.
• Conceptualize and establish the architecture of innovative equipment.
• Engineer mechanical systems, incorporating the selection and utilization of motors, actuators, gear drives, pumps, and valves.
• Generate intricate engineering drawings.
• Conduct design verification and validation testing to guarantee adherence to specifications, safety regulations, and product requisites.
• Enhance the design of existing machines.
• Utilize analysis tools such as Fish Bone Diagram, FMEA, etc. to optimize processes.

Requirements

• 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following:

a. Design of automation or semiconductor equipment

b. High precision machine design

c. Design of High-Speed Pick and Place mechanisms

• Familiar with 3D CAD software
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg


Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Senior Automation engineer to join us in a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Overseeing the design and management of interfaces between DeltaV and third-party PLC systems.

· Reviewing vendor functional and design specifications to ensure compliance with client global and local standards.

· Collaborating with various teams to develop system architecture, network architecture, and cable schedules.

· Reviewing test documents and protocols (FAT, SAT, Interface Test, etc.) to ensure alignment with CSV and QA standards.

· Participating in design meetings at various vendor locations.

· Witnessing FATs and interface tests at various vendor locations.

· Collaborating closely with qualification teams to facilitate the generation and execution of qualification tests (IQ, OQ, PQ).

· Providing support for FAT, SAT, IQ, OQ, and PQ processes.

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Electrical Design Engineer
Basic Salary: up to S$4,000 + $25 Fix Phone allowance

Working Days: Monday to Friday
Working Hours: 8-5 / 9-6
Working Location: Clementi – 8 Pandan Cres

MAIN JOB RESPONSIBILTY:

• Collaborate with the Sales department for the required documentation in each project
• Prepare electrical line and detailed schematic drawings and proposed general arrangement based on the customer order information, work together with sales team to ensure that drawings match with customer order and update drawings and design based on customer feedback.
• Prepare bill of materials or BOMs to capture all the part and components that are required for the whole system design.
• Liaise with suppliers to ensure that correct materials and components are delivered and raise purchase requisitions.
• Plans, directs, and coordinates preparation of project documentation, such as engineering drawings, production specifications and schedules, and contract modifications, to ensure customer contract requirements are met. Reviews contract to determine documentation required for each phase of project, applying knowledge of engineering and manufacturing processes.
• Participate to factory acceptance tests with customer and provide assistance for the Quality Assurance during factory testing.
• Provide training to clients, prepare as built technical drawings and user manuals before final delivery is done.
• Attend to technical questions and problems of clients
• Monitors status of project to ensure documentation is submitted according to schedule
• Maintain log files of drawings in engineering database
• Create technical datasheets as required

JOB REQUIREMENT:

• Degree / Diploma in Engineering majoring in Electrical Engineering or Power Electronics. General knowledge of electrical systems, circuit diagrams and power electronics.
• Experience of using AutoCAD and reading electrical drawings is a must.
• Knowledge of industrial power systems involving UPS, rectifiers, converters, and inverters is required.
• Prior experience of electrical engineering in our customer segments: power generation, marine & offshore, oil & gas, or railway infrastructure is an added advantage.

If Interest please kindly click on the Apply button

Ong Choon Kiat (James) | Reg No: R22104989

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Job Scope

• Follow the customer drawing to prepare the sheet metal process drawings and programs for machines.
• Innovative thinking and problem-solving skills.
• Jigs & fixture preparation
• New product devolvement collaborates with customer R&D
• Follow the procedures of the Quality Management System (QMS) for implementation and control
• Support for audit work & documents preparation

Requirements and Qualifications

• Diploma in Mechanical Engineering or equivalent
• Solid works & AutoCAD knowledge
• Minimum 3years experience in relevant to the sheet metal industries

Responsibilities:

• Work closely with project stakeholders, including clients, contractors, and subcontractors, ensuring project goals are achieved through effective collaboration and communication.
• Develop and review architectural and engineering plans, ensuring they are innovative, practical, and compliant with all regulations.
• Coordinate all architectural works, maintaining meticulous documentation and submissions.
• Ensure all designs meet governmental health, safety regulations, and industry standards.
• Provide clear guidance to subcontractors, such as builders, plumbers, and electricians, assisting them in interpreting design specifications.
• Liaise with clients regularly to address concerns, adapt to feedback, and ensure project requirements are fully understood and met.
• Manage project timelines diligently, ensuring adherence to deadlines and budget constraints.
• Produce detailed reports and analyses as required to track project progress and outcomes.
• Conduct regular site visits to verify and validate that onsite work aligns with plans and designs, ensuring high-quality construction execution.

Requirements:

• Minimum Degree in Architectural Engineering or equivalent
• At least 3 years of relevant experience in the civil construction industry
• Good analytical skills and able to work independently.
• Excellent project management, coordination, and communication skills.
• Able to start work immediately or within short notice

Interested applicants, please write in through CareersFuture with detailed resume in MS Words format.

EA License Number: 17C8690

Please Provide:

1) Availability
2) Current/ Expected salary
3) Reasons for leaving previous employments

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Work closely with project stakeholders, including clients, contractors, and subcontractors, ensuring project goals are achieved through effective collaboration and communication.
• Develop and review architectural and engineering plans, ensuring they are innovative, practical, and compliant with all regulations.
• Coordinate all architectural works, maintaining meticulous documentation and submissions.
• Ensure all designs meet governmental health, safety regulations, and industry standards.
• Provide clear guidance to subcontractors, such as builders, plumbers, and electricians, assisting them in interpreting design specifications.
• Liaise with clients regularly to address concerns, adapt to feedback, and ensure project requirements are fully understood and met.
• Manage project timelines diligently, ensuring adherence to deadlines and budget constraints.
• Produce detailed reports and analyses as required to track project progress and outcomes.
• Conduct regular site visits to verify and validate that onsite work aligns with plans and designs, ensuring high-quality construction execution.

Requirements:

• Minimum Degree in Architectural Engineering or equivalent
• At least 3 years of relevant experience in the civil construction industry
• Good analytical skills and able to work independently.
• Excellent project management, coordination, and communication skills.
• Able to start work immediately or within short notice

Interested applicants, please write in through CareersFuture with detailed resume in MS Words format.

EA License Number: 17C8690

Please Provide:

1) Availability
2) Current/ Expected salary
3) Reasons for leaving previous employments

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Work closely with project stakeholders, including clients, contractors, and subcontractors, ensuring project goals are achieved through effective collaboration and communication.
• Develop and review architectural and engineering plans, ensuring they are innovative, practical, and compliant with all regulations.
• Coordinate all architectural works, maintaining meticulous documentation and submissions.
• Ensure all designs meet governmental health, safety regulations, and industry standards.
• Provide clear guidance to subcontractors, such as builders, plumbers, and electricians, assisting them in interpreting design specifications.
• Liaise with clients regularly to address concerns, adapt to feedback, and ensure project requirements are fully understood and met.
• Manage project timelines diligently, ensuring adherence to deadlines and budget constraints.
• Produce detailed reports and analyses as required to track project progress and outcomes.
• Conduct regular site visits to verify and validate that onsite work aligns with plans and designs, ensuring high-quality construction execution.

Requirements:

• Minimum Degree in Architectural Engineering or equivalent
• At least 3 years of relevant experience in the civil construction industry
• Good analytical skills and able to work independently.
• Excellent project management, coordination, and communication skills.
• Able to start work immediately or within short notice

Interested applicants, please write in through CareersFuture with detailed resume in MS Words format.

EA License Number: 17C8690

Please Provide:

1) Availability
2) Current/ Expected salary
3) Reasons for leaving previous employments

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Develop architectural designs for marine structures, utilizing CAD software and other design tools.
• Create detailed plans that comply with industry standards and regulations.
• Assist in managing projects from conception through completion, including planning, budgeting, and coordination with contractors and stakeholders.
• Prepare detailed project documentation, including design drawings, specifications, and contract documents.
• Conduct site investigations and feasibility studies to assess environmental impacts and ensure project viability.
• Conduct analyses to assess structural integrity, environmental impact, and risk associated with marine construction projects.
• Work closely with engineers, environmental scientists, and other professionals to ensure designs are feasible, sustainable, and integrated with surrounding environments.
• Ensure all projects comply with local, national, and international regulations, focusing on environmental sustainability and safety.

Requirements:

• Minimum Degree/ Master in Architecture / Civil engineering or equivalent
• At least 2 years of relevant experience in the Marine / Civil Construction industries
• Proficiency in design and analysis software such as AutoCAD/Revit
• Strong understanding of marine construction materials, methods, and technologies.
• Excellent communication, collaboration, and project management skills.
• Able to start work immediately or within short notice

Interested applicants, please write in through CareersFuture with detailed resume in MS Words format.

EA License Number: 17C8690

Please Provide:

1) Availability

2) Current/ Expected salary

3) Reasons for leaving previous employments

We regret that only shortlisted candidates will be notified.