Total 21,859 design engineer job vacancies in Engineering category in Singapore

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Scope of Engineering / Technical Sales Engineer

1. Working together with sales team to maintain or excel (but not constrainted to) a minimum monthly sales target of S$100,000. (As a good guide for fluctuating monthly sales, the figure may be calculated base on a three month average).
2. To help in the servicing of customers in terms of conceptualizing of machine processes, writing up of proposals and quotations.
3. Help PM (Project Manager) in the planning of capacity to ensure timeline is being met. This is done with the help of a Master Project Schedule.
4. Coordinate with internal and external designers on the customer requirements to ensure customer needs are met.
5. Project monitoring to ensure timely delivery of goods.
6. To be involved in the process of new business development in new areas of industries.
7. Involved in public relations taking care of overseas partners and customers.

Requirements

1. With at least 3 years experience in Manufacturing Automation Machines. Knowledge in CAD software and common Miscrosoft software is required.
2. Educational qualifications: Diploma (or higher) in any discipline. Those with related experience may apply.
3. Self-motivated, objective driven. Multi-skill and multi-tasking required. Independent, self-initiative and creative.
4. Good interpersonal communication skills required (English and Mandarin).
5. Able to work well with others in terms of commitment, interests and adopting positive attitude.
6. Frequent traveling may be required.
7. Class 3 driving license added advantage
8. Willingness and flexibility are added good pre-requisites
9. Preferably to possess own vehicle (car allowances provided)

About the Company:

Dbiz is a high-performing product and engineering company that partners with organizations to build out digital solutions using the right technology at the right time. We pride ourselves on our innovative use of technology in various ways.

Role Summary:

We are seeking a talented and experienced Senior Outsystems Developer to join our dynamic team. The ideal candidate will have a strong background in developing and implementing solutions using the Outsystems platform, with proficiency in .NET, SQL, and JavaScript. This role involves designing, developing, and optimizing applications to meet business needs effectively.

Key Responsibilities:

• Design, develop, and maintain applications using the Outsystems platform.
• Utilize .NET, SQL, and JavaScript to create robust and scalable solutions.
• Collaborate with business stakeholders to understand requirements and translate them into technical solutions.
• Implement best practices in coding and application development.
• Troubleshoot and resolve application issues, ensuring optimal performance and user experience.
• Perform code reviews and provide mentorship to junior developers.
• Stay current with Outsystems updates and emerging technologies to continuously enhance skills and knowledge.
• Ensure adherence to project timelines and deliver high-quality solutions within deadlines.

Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• 2+ years of professional experience in software development with a focus on Outsystems, .NET, SQL, and JavaScript.
• Proven experience in developing and deploying applications using the Outsystems platform.
• Strong proficiency in the .NET framework and associated technologies.
• Extensive experience with SQL databases and writing complex queries.
• Advanced knowledge of JavaScript and its frameworks/libraries.
• Excellent problem-solving skills and attention to detail.
• Strong communication skills and ability to work collaboratively in a team environment.
• Experience in agile development methodologies is a plus.

Preferred Skills:

• Certifications in Outsystems or related technologies.
• Experience with the integration of Outsystems with other systems and APIs.
• Knowledge of cloud platforms and DevOps practices.

Life at Dbiz:

• Competitive salary and attractive benefits
• Dynamic and innovative work environment
• Opportunities for personal growth and development
• Engaging and collaborative company culture

• Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s)
• To provide administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other matter concerning the site staff administrative matters, discipline and welfare.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the Superintending Officer.
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To inspect completed work and prepare defects list if necessary.

Requirements

• Degree in Civil and Structural engineering recognised by PEB
• At least 8 years of civil engineering experience, of which 5 years must be of Geotechnical such as tunnels,deep excavation and foundation, including works such as installation of monitoring instruments and collation of monitoring data
• Possessed a valid RE Cert

The Digital Health Accelerator (DHA) is led by A*STAR, Ministry of Health (MOH) Singapore, SingHealth, National Healthcare Group (NHG), and National University Health System (NUHS). DHA supports innovators in driving adoption and scaling of market ready or near-market ready digital health solutions. DHA is hosted by Singapore's Diagnostics Development Hub (DxD Hub). The DHA integration engineer is responsible for planning and developing workflow and technical interfaces between healthcare IT systems. She/He will work with DHA Project Managers, Solution Architects, health systems and companies to accomplish this objective. She/He may also be called upon to advise other developers on integration standards.

Responsibilities:

• You’ll be involved in the development, design, build, testing, and go live phases of multiple integration projects.
• This includes scripting to conform / transform to another systems specifications.
• You will also work with internal teams to continuously improve processes and procedures around deployment of interoperability products that communicate in HIT standards-based formats such as HL7, IHE Profiles, Direct, or SMART on FHIR.
• The Integration Engineer oversees the development of new interfaces and maintain the sandbox environment up to date for application testing.

Requirements:

• Bachelor’s degree in information systems, Computer Science, Engineering, Computer Information Systems, Management Information Systems, or equivalent experience
• 5+ years’ experience in HCIT integration using established and contemporary interoperability standards (e.g. HL7, SMRT, FHIR)
• Experience with SQL and relational databases, and communication using secure protocols.
• Ability to work in a team environment alongside developers and deployment teams.
• Utilise engines like Mirth Connect or Rhapsody to have a standard way of integration using both HL7 and DICOM
• Knowledge in developing and configuring Context Launch requirements according to AES 256 standards.
• Assess and customise integrations (HL7 / FHIR / DICOM) based on the project to specific workflow.
• Experience with cloud deployments and/or pipelines, especially Pivotal Cloud Foundry
• Experience with popular healthcare integration engines with ability to recommend and/or select different integration approaches depending on the desired outcomes for the system.
• Strong communication skills and ability to work with project stakeholders from different backgrounds (e.g. technical, clinical)
• Experience integrating with Singapore public hospital technical stack and working with Synapxe are a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Work closely with project team to assist Quality and Validation Manager Asia region to the tasks on schedule and within quality standard compliance.
• Responsible completion of the Quality, Cost, and Time validation functions for customer projects.
• Create and maintain qualification/validation documentation for mechanical, software, and hardware components from the design phase of projects.
• Oversee the qualification and validation processes for projects in conducting risk analysis, protocol drafting, and test implementation during FAT & SAT process internally and partners’ sites.

Requirements:

• Diploma in Mechanical Engineering or equivalent
• At least 2 years of quality and validation of automated systems experience.
• Proficient in MS Office (Excel, Word and PowerPoint).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Roles & Responsibilities

- Oversee daily site operations and coordinate tasks

- Adhere to safety regulations and maintain work quality

- Track progress, document activities, and report updates

- Compile and submit documents timely

- Co-ordinate project team with directive instructions

- Others project related assignment

Qualification & Requirements

- Candidate must possess Bachelor's Degree/Diploma in Civil/Mechanical Engineering

- Knowledge of Engineering Principles/ Software (eg: AUTOCAD)

- Building Construction Supervisor Safety Course Certificate and other relevant Construction certificates

- 3 years working experience in Construction Industry are preferred

- Passionate & accountable

- Adaptable to the fast-paced working environment.

About the Client:

Join a recognized and trusted technology services organization in Singapore.

Responsibilities:

To support and optimize privileged access management processes and frameworks, ensuring compliance and minimizing security risks, in a 12-month contract.

• Automate privileged access integration to achieve secure, streamlined operations.
• Provide ongoing support and dashboard insights for privileged access governance.
• Collaborate with stakeholders to address compliance, reporting, and operational requirements.
• Implement and enforce access management policies to mitigate security risks.
• Conduct risk assessments and manage audit preparations and corrective actions.

We are looking for a security-focused professional with a strong foundation in privileged access management and expertise in CyberArk.

Skills/Requirement:

• Extensive CyberArk experience, including API integrations and regional support.
• Proficiency in PowerShell and SQL for automation and reporting.
• Skilled in data visualization with Grafana for access management insights.
• Strong understanding of risk management, compliance, and governance in PAM.
• Bachelor’s degree in Computer Science, Engineering, or relevant field; CyberArk certification preferred.

If you are passionate about privileged access management and looking to make a meaningful impact, apply now to join our team.

To Apply: Apply online now or contact me to discuss this new opportunity at [email protected]

We regret to inform you that only shortlisted candidates will be contacted.

PERSOLKELLY Singapore Pte Ltd • EA License No.01C4394 • EA Registration No. R1330844 (Naveen Vasudevan)

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

**********************************

The role is responsible for Equipment Package Ownership (full lifecycle – Engineering Design, Build, Testing (FAT), Installation and Commissioning), including experience in commissioning and qualification of process equipment.

Responsibilities:

● Experience in upstream / downstream / Central services process operation, (experience in equipment design for process equipment will be an advantage).

● Project scheduling and able to come up solutions to keep the schedule on track when there are hiccups.

● Responsible for basic and detailed design, commissioning and qualification activities, including URS development, FAT, SAT, DQ, IQ, OQ and PQ.

● Review industry practices for best-in-class approach.

● Ensure that the appropriate Quality standards are applied consistent with best practice and internal Quality Standards and expectations.

● Deliver the project from conceptual through implementation phase, encompassing support for a wide range of engineering and construction requirements.

● Coordinates with different functions like manufacturing, safety, MSAT, validation and quality for implementation of changes associated with the project.

● Work independently and/or with the project manager to complete the engineering projects within schedule, budget and quality constraints.

● Agile response to equipment issue, troubleshoot and come up with solutions swiftly.

● Any other task as assigned by Supervisor/Manager.

About You:

● Diploma/Degree in Chemical Engineering, Chemistry or equivalent with at least 5 yearss experience in a process engineering role or similar role with a biologics manufacturing plan.

● At least 5 years of relevant working experience in the Pharmaceutical / Biologics manufacturing industry with experience in Process Engineer.

● In Biologics industry with understanding of cGMP requirement.

● Should have Design experience at various stages of project (Base, Detailed design).

● Able to support Installation, Commissioning & Qualification activity at site.

● Must be able to drive project.

● Any other task given related to Process.

Contract length: 12 Months. Option to extend depending on performance and business needs.

• Provide supervision services for all M&E works to ensure that contractors complies with contract/authorities'/agencies' requirements
• Oversee the M&E team and personnel
• Review all drawings and specifications and highlight any discrepancies, non-workable and/or missing details to OIC and the QP(D)s and QP(S)
• Review and comment on all construction method statements, risk assessmentsfor works, workplans, design for safety (DfS) workshop and SOP proposals
• Evaluate technically any claims submitted by main contractor and submit recommendation to the Superintending Officer
• Provide all relevant endorsements required by authorities/agencies/client
• Assist QPD for application of TOP and CSC
• Prepare site supervision plan and supervise all works directed by OIC
• Monitor project progress to ensure timely completion and prepare necessary site progress and status report for update to client
• Adhere to regulations and requirements of all stakeholders for any supervision work while ensuring proper supervision
• Report any accident/incident/near miss on site

Requirements

• Accredited with Resident Engineer certification under Joint Accreditation Committee of the Institution of Engineers Singapore
• Minimum 10 years of experience , of which at least 8 years in major construction works in buildings, services laying and testing and commissioning
• A Mechanical and Electrical Engineering degree recognised by the PEB of Singapore
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report
• Licensed electrical worker and licensed plumber are preferred

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• Lead the planning and requirements phases of infrastructure network operations projects.
• Manage and troubleshoot SD-WAN infrastructure.
• Oversee infrastructure network testing and implementation processes.
• Oversee network operations activities and the installation of network systems according to design specifications.
• Simulate user issues to identify solutions for resolving network and connectivity-related problems.
• Develop temporary fixes to address infrastructure-related incidents until permanent solutions are implemented.
• Manage the implementation of approved infrastructure changes and maintenance procedures.
• Pilot new tools, technologies, or processes to improve infrastructure system performance.
• Contribute to the design and execution of infrastructure replacement plans.
• Guide and train teams in resolving infrastructure-related incidents.
• Develop client satisfaction metrics and service procedures.
• Recommend improvements to enhance performance and client satisfaction.
• Perform ongoing optimization and tuning of infrastructure network hardware and software, including updates and upgrades.

Requirements:

• Diploma or Bachelor’s Degree in Information Technology, Information Systems, Computer Science, Business IT, or a related field.
• Certifications such as CCNP, NSE, or CCSA.
• Cloud knowledge and certifications are considered an advantage.
• Experience with network management systems such as SolarWinds, WLC, FortiAnalyzer, and FortiManager.
• Understanding of cloud-based network technologies and architectures, including Azure.
• Strong communication, interpersonal, and presentation skills.
• Willingness and availability to work outside regular office hours and on weekends as needed.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24970

To learn more about this opportunity, please contact Yingying at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lai Yingying | Registration No: R1110239

Job Duties:-

1. To ensure that the Contractor co-ordinates the work of various contractors.

2. To review detailed programmes and plans.

3. To check that all necessary drawings and instruction have been given to contractors and authorization obtained, in accordance with the approved programme.

4. To check that materials are ordered in good time and permits obtained.

5. Check that all constructions works are carried out in a safe manner, and that the site is kept safe and secure.

6. To watch for faulty workmanship and materials incorporated in the works and to issue instructions for rectification.

7. To check line and level and layout of structure during erection and that intentions of “contract” drawings are adhered to.

8. To check structural slab, beam and column sizes and reinforcements placed and that intent of design details are followed.

To keep a record of all measurements and tests and to bring plans into conformity with the work actually executed

Requirement:-

• Degree in Mechanical and/or Electrical Engineering recognised by the Professional Engineers Board (PEB) and at least five (5) years of relevant working experience in the field.
• RE (MEICA) shall be accredited with Joint Accreditation Committee (JAC) of the IES Singapore and Association of Consulting Engineers, Singapore (ACES).
• Full time at site to supervise the construction of MEICA works and ensure the works are carried out in compliance with statutory requirements and the specifications.
• Experienced in PUB Project for water works and well-verse with PUB requirements (i.e. Pump/Valves/SCADA/Electrical Instrumentation & Control System).
• Contract Duration : 2 years
• Project location: Bukit Batok Road
• Project Type: Construction of Service Reservoir and Pipeline works with Control Building works (Client - PUB)
• Able to start by Nov 2024 or work within short notice
• Salary : $6000 to $6500

Overview: -

• Monthly Salary: Up to $3500 + AWB + Bonus (depend on EXP)
• Location: Loyang, Pasir Ris
• 5 Days (Monday to Friday), Office Hours

Your Responsibilities: -

• Develop, document, and support the creation of high-precision plastic injection molds and components for manufacturing.
• Assist the Program team during the initial project quotation phase by providing accurate tooling and product DFM (Design for Manufacturability) that aligns with quality standards.
• Engage with customers for DFM and mold concept reviews to ensure their technical requirements and concerns are properly addressed.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.

You will need: -

• Previous experience or knowledge in Precision Tooling Design/Fabrication, Micro Plastic Injection Molding, or Manufacturing Process Engineering is preferred.
• Proficiency in 3D CAD software, specifically Siemens UG NX or PTC Creo 4.0 and above.

For interested applicants, kindly click "Apply Now"

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Senior /Design Engineer (C&S)

• A1 Main Contractor
• Full time permanent roles
• Large scale buildings/infrastructure projects

Job Responsibilities:

• Conduct design analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop engineering drawings and ensure specifications/regulations are followed.
• Liaise with Consultant, engineers and other departments to ensure that the design intentions are met.
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices.

Requirements:

• Degree in Civil Engineering from accredited Universities

For more information, please apply with a word format CV or contact Khai Lun at +65 9014 5741 or email me at [email protected] to have a confidential discussion on the position.

We regret that only short-listed candidates will be notified.

Registration No. R1984761
EA Licence No. 19C9622

Job Description & Requirements

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams,

Job Description & Requirements

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams,

Job Description & Requirements

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams,

Job Description & Requirements

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams,

Benefits:

• Basic salary up to $2800
• Good career progression
• East Area
• Training provided

Job Scope:

• Perform troubleshooting and recovery on semiconductor manufacturing equipment to reduce downtime and ensure optimal performance.
• Assist in establishing recovery processes and procedures to enhance equipment operation efficiency.
• Conduct routine inspections and preventive maintenance on semiconductor tools and machinery, ensuring all equipment remains in top condition.
• Collaborate with engineering teams to analyse data and enhance recovery techniques.
• Document maintenance activities, recovery procedures, and equipment performance for quality assurance and compliance.

Job Requirements:

• Possess a bachelor’s degree in electrical/ mechanical engineering or related field will be a plus
• No prior experience required

To Apply, kindly click on the "APPLY NOW" button and job details.

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Tan Pei Xuan (R24124430)

Senior/Mechanical Design Engineer

Working day: Monday - Friday
Working Hour: 830am - 6:15pm
Salary range: $4,000 - $6,000 (depend on experience)
Location: Woodlands Ave 9

Responsibilities:

As a Senior Mechanical Design Engineer, you'll play a crucial role in our team, leading the design and development of our products from concept to production. Your focus will be on driving innovation, ensuring our products meet the highest standards of quality, performance, and reliability. You will collaborate closely with cross-functional teams, playing a key role within the team.

Job Responsibilities:

• Analyze project requirements and develop innovative solutions to meet customer needs.
• Design high precision and high-tech automation equipment, ensuring that it meets performance, quality, and reliability standards.
• Select components such as servo axes and robots based on project requirements.
• Coordinate with fabrication houses and component suppliers to ensure timely delivery of parts and components.
• Guide assembly technicians in building and testing the equipment, ensuring that it meets design specifications and performance requirements.
• Conduct design reviews and provide feedback to ensure continuous improvement of our products.
• Stay up to date with the latest developments in mechanical engineering and automation technology.
• Other duties as assigned.

Job Requirement:

• Bachelor’s degree / Diploma in Mechanical Engineering / Mechatronics or related field preferred.
• Min 6 years of relevant experience in automation equipment design.
• Knowledge and experience in factory automation is an advantage.
• Experience in electrical, pneumatic, and sensor component selections.
• Proficient in SolidWorks 3D software.
• Strong understanding of mechanical engineering principles, materials, and manufacturing processes

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Mechanical Design Engineer | Senior | Automation Machine | Up to $6k | Woodland

Working day: Monday - Friday
Working Hour: 830am - 6:15pm
Salary range: $4,000 - $6,000 (depend on experience)
Location: Woodlands Ave 9

Responsibilities:

As a Senior Mechanical Design Engineer, you'll play a crucial role in our team, leading the design and development of our products from concept to production. Your focus will be on driving innovation, ensuring our products meet the highest standards of quality, performance, and reliability. You will collaborate closely with cross-functional teams, playing a key role within the team.

Job Responsibilities:

• Analyze project requirements and develop innovative solutions to meet customer needs.
• Design high precision and high-tech automation equipment, ensuring that it meets performance, quality, and reliability standards.
• Select components such as servo axes and robots based on project requirements.
• Coordinate with fabrication houses and component suppliers to ensure timely delivery of parts and components.
• Guide assembly technicians in building and testing the equipment, ensuring that it meets design specifications and performance requirements.
• Conduct design reviews and provide feedback to ensure continuous improvement of our products.
• Stay up to date with the latest developments in mechanical engineering and automation technology.
• Other duties as assigned.

Job Requirement

• Bachelor’s degree / Diploma in Mechanical Engineering / Mechatronics or related field preferred.
• Min 6 years of relevant experience in automation equipment design.
• Knowledge and experience in factory automation is an advantage.
• Experience in electrical, pneumatic, and sensor component selections.
• Proficient in SolidWorks 3D software.
• Strong understanding of mechanical engineering principles, materials, and manufacturing processes

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

1. Diagnose, troubleshoot, and resolve software issues on installed Building Automation Systems.
2. Development of program and graphics design for upgrading works.
3. Diagnose and troubleshoot problems with control devices and instrumentation.
4. Perform Building Automation system maintenance on assigned sites.
5. Managing risk assessment, safe work procedures and SOP.
6. Create and maintain site documentations such as PM forms, risk assessment and any other documents needed for the site maintenance.
7. Prioritize and organize tasks and set in motion the sequence to achieve the desired objectives with the turn-around time required.
8. Conform to project site safety and housekeeping requirements.
9. Develop and enforce software standards and process.

REQUIREMENT

1. Minimum 3 years of professional work experience in Building Automation, HVAC and similar process and control systems.
2. Good understanding of maintenance environments, corrective, preventive and predictive maintenance procedures.
3. Experience in maintenance/troubleshooting of Building Maintenance System (BMS), Extra Low Voltage systems (ELV), DDC/PLC programming and SCADA design & operation.

QUALIFICATION

1. Diploma in Mechanical/ Electrical/Facilities Maintenance or any other relevant Engineering discipline from a reputable local or foreign institution.
2. Safety certifications (BCSS, W@A, bizSAFE etc.) will be an added advantage.

Responsibilities

• Define specifications and scope of work for contractors.
• Oversee the startup, testing, commissioning, and troubleshooting of machines.
• Handle the creation and management of Single Line Diagrams, Control Schematic drawings, and PLC/HMI programming.
• Ensure timely execution of projects.
• Prepare and support the installation team.
• Willing to travel and work on overseas assignments.
• Will be part of the Customer Support team providing assistance for PLC Control Software Solutions
• Resolve and diagnosing of system errors to ensure minimal downtime.

Requirements

• Candidate with relevant working experience in Siemens S7 Classic Programming, Siemens TIA Portal, HMI Development is preferred.
• Degree Electronic/Electrical/ Mechatronic Engineering or related discipline
• At least 5 years of relevant working experience in Automation Industry.
• Candidate with experience in material handling operations will be an advantage.
• Basic Knowledge of Allen Bradley PLC.
• Control Panel Design Knowledge

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting,

using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)