Total 22,505 mechanical engineer job vacancies in Engineering category in Singapore

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 36 months
• Start from: November 2024

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 4 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Position Overview:

As a Sr. Staff signal integrity engineer, you will be working on challenging SI and PI tasks in globally distributed teams. You will be supporting SI/PI signoff of chip design, package design and PCB design in order to support successful delivery of products of various product lines to market. You will be working with design, test, P&R and application teams globally for modeling of chip high speed I/O and power rails. You will be supporting customers in signing off hardware design or resolving SI/PI issues where system design has constraints. You will also be involved in defining specifications of product electrical performance. You may also be involved in modeling and simulation of EMC issues.

Responsibilities:

Primary (70%):

1. Responsible for SI/PI signoff of chip design, package design and PCB design.

2. Responsible for modeling high speed I/O and PDN.

3. Responsible for customer support for PCB design signoff and issue debug.

Secondary (30%):

1. Responsible for product electrical specifications related to high speed I/O.

2. Responsible for modeling and simulation of EMC issues.

Requirements:

Experience/Skills:

1. 10+ year working experience in SI/PI

2. Deep understanding in electromagnetic theory, transmission line theory and microwave theory

3. Familiar with SI/PI design flow, time domain and frequency domain modeling and simulation

4. Good comprehension of PLL, equalization, CDR, jitter, noise, IBIS modeling, 8b10b encoding

5. Hands on with lab equipment including high speed oscilloscope, spectrum analyzer and network analyzer

6. Skilled with SI/PI simulation tools from ANSYS, Cadence, Keysight and others.

7. Skilled in data processing with script in Python, Matlab or other language.

8. Experience in MIPI D-PHY, C-PHY and PAM-4 is a plus.

9. Good communication skills and team work.

10. Education: MS/PhD

Responsibilities:

• Manage VMware and Vcenter environments
• Configure and manage Meraki switches/access points and Fortigate firewalls
• Maintain Windows servers and work with MS-SQL and IIS servers to support vendor development projects and generate queries for reports
• Maintain Windows workstations and laptops
• Oversee backup and recovery processes, and implement disaster recovery plans
• Collaborate with HQ to ensure compliance with IT standards, including updating ISO documentation as needed

Requirements:

• Must have at least a Diploma or Degree in Computer Science, Information Technology, or a related field
• 2 years of experience in IT infrastructure management
• Proficient in managing Windows servers and workstations
• Experience with VMware and Vcenter
• Familiarity with Meraki and Fortigate products
• Skilled in SQL and IIS server management
• Experience in installing and configuring Office 365

To apply, please visit www.gmprecruit.com and search for Job Reference: 24920

To learn more about this opportunity, please contact Yingying at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lai Yingying | Registration No: R1110239

Senior/Process Engineer (Wastewater treatment)

Our client is a leading environmental solutions firm with strong expertise in EPCC, O&M and design & build. In line with their growth and expansion, they’re now looking for a Senior/Process Engineer to join their dynamic organization during an exciting time in their development.

Job Responsibilities

• Be responsible for designing, implementing, and optimizing wastewater treatment processes and systems
• Coordinate with cross-functional teams, including design, construction, and commissioning, to ensure seamless project execution.
• Prepare technical specifications for treatment plant
• Provide engineering support for tender activities, bids and proposals, and prepare testing and commissioning plans
• Manage contractors and suppliers, ensuring adherence to technical specifications and safety regulations
• Lead continuous improvement initiatives to enhance the reliability and effectiveness of wastewater systems.
• Ensure that treatment plants comply with regulatory standards and operate efficiently

Requirements

• Minimum degree in Chemical Engineering, Environmental Engineering or related field
• Possess experience with minimum 5 wastewater treatment projects

Location: West

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Job Description

• Review the BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Supervise and coordinate site installation works by contractors
• Attend site coordinate meetings with main-con, consultants and contractor
• Lead daily briefing and execute the project activities and oversee implementation of the quality plan
• Coordinate installation activities, site safety, order, arrange and receive M&E major equipment delivery for contractors’ installation
• Provide site progress update bi-weekly and monthly
• Arrange and attend material, equipment, installation, and testing inspection
• Carry out testing and commissioning and handover of completed work activities to respective authorities or clients to in timely manner and delivery with desired quality standards and safety aspects
• Maintain all quality and safety records, and other duties as assigned

Requirements

• Diploma or Degree in Building Service / Mechanical Engineering/Engineering
• Fresh Graduates are welcomed to apply
• Strong project management skills
• Excellent analytical, critical thinking, problem-solving ailities
• Proactive and willing to take on new challenges
• Creative, adaptable, and innovative in approach
• Strong interpersonal, communication, and leadership skills
• A collaborative team player with positive attitude

PC Deployment and Configuration

• Install, configure, and deploy personal computers and related peripherals, including desktops, laptops, monitors, and printers.
• Ensure that all PCs are set up according to company standards, including operating systems, software applications, and security protocols.
• Perform hardware and software upgrades as needed.

Troubleshooting and Technical Support:

• Provide technical support to end-users for PC-related issues, including hardware and software problems.
• Escalate complex problems to the appropriate IT teams when necessary.

Maintenance and Upkeep:

• Conduct routine maintenance on PCs to ensure optimal performance and security.
• Perform system updates, patches, and antivirus scans.
• Manage inventory of PC hardware and software licenses.

Documentation:

• Maintain accurate records of PC configurations, repairs, and maintenance activities.
• Updates of support tickets and resolutions details on job completion.

Job Requirements:

• Nitec / Diploma in IT, Computer Engineering, Electrical Electronics or relevant
• Welcome entry level (Training provided from basic)
• 5 days work (Monday to Friday)
• Islandwide work locations (Mostly in the East & Central areas)
• Salary $2300 - $2800
• Start work immediately or within short notice

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

Primary Objectives of Position

• Manage the overall supervision of maintenance activities in depot and workshop
• Responsible for the availability of passenger trains, engineering train vehicles, light rail vehicles and workshop overhaul or plant equipment for mainline operation.
• Manage the budget expenditure of the section
• Ensure all defects on vehicles/equipment are rectified in a safe and responsive way.
• Provide an effective technical support service to all other Rolling Stock sections, including development and control of an overall maintenance plan, provision of Work Instructions, procedures and technical documentation and provision of regular performance information.
• Ensure that Rolling Stock staff and contractors within their sections are adequately trained and competent to perform their tasks safely and proficiently in the railway environment.
• Overall-in-charge of managing corrective and preventive maintenance of NEL/SPLRT passenger trains, engineering trains, light rail vehicles, or depot plant equipment.
• Overall-in-charge for all engineering projects in NEL/SPLRT Rolling Stock.

Major Responsibilities

• The day-to-day management of staff in their section.
• Ensuring individual roles, functions and responsibilities are clearly defined and communicated.
• Managing section budget resources to maximize maintenance outcomes and improve customer satisfaction.
• Providing advice and support to the HOD and Executive management as required.
• Identifying areas for improvement through training and development programs
• Ensure all staff are adequately trained and competent.
• Manage, lead, and motivate the section to achieve reliability, quality, cost and availability targets to meet customer needs.
• Maintain the performance of all vehicles and depot equipment.
• Perform and standby for company and department duty schedule such as PST, EIC, AEIC or Rerailment duty

The above activities are no means exhaustive and are subjected to amendment whenever is needed

Specific Safety Responsibilities

• Ensure all work related to the section are undertaken in a safe way during all maintenance activities in Sengkang Depot.
• Undertake Monthly Safety Observations of all areas under the purview of Rolling Stock and ensure that controls are in place to achieve safety.

Job Specifications

Minimum Education / Qualifications

• Degree or Diploma in Engineering from a recognized university or polytechnic.

Minimum Years of Relevant Experience

• Preferably with 3 years of relevant experience in Railway Engineering/Maintenance or equivalent

Knowledge/Skills

• Strong Communication, Writing, Analytical and Problem solving skills
• Knowledge of Training and Development, preferably with full ACTA qualification
• Conversant in MS Office software (Word, Excel, PowerPoint)

Attributes

• Highly motivated and resourceful team player
• Strong interpersonal and communication skills
• Strong planning and organization skills
• Analytical and meticulous

Electrical Engineer (Exp: 3+ years)

Permanent Position

Central, Singapore

Rotating shift work is required.

Key Responsibilities:

• Perform daily, weekly, and monthly maintenance on the PBT system, including testing, inspection, adjustment, and calibration tasks, both at heights and within equipment enclosures
• Maintain, test, and troubleshoot key systems, including:Accelerator systems
  Irradiation devices Patient alignment systems Safety interlock systems
• Monitor the operation of the PBT system and identify areas for performance improvement.
• Adopt and integrate new technology, products, and processes to enhance system functionality.
• Respond promptly to service calls, ensuring timely resolution and customer satisfaction.
• Fulfill work orders, submit reports (including timecards, working reports, and expense reports), and adhere to company and customer procedures.
• Assist with troubleshooting and commissioning activities when necessary.
• Ensure compliance with regulatory standards, including radiation safety regulations, company policies, and applicable laws.
• Work with high-voltage equipment, magnetic fields, and in radiation-prone environments.

Requirements:

• Diploma or higher in Electrical Engineering or a related discipline.
• 3+ years of relevant experience with large-scale electrical systems.
• Strong understanding of electrical systems, particularly in environments involving high-voltage, radiation, and electromagnetic fields.
• Proficient in reading and interpreting engineering documents (e.g., schematics, circuit diagrams, piping diagrams).
• Experience using electronic test and measurement instruments such as DVM, oscilloscopes, and micrometers.
• Capable of working independently as well as collaboratively within cross-functional teams.
• Excellent communication, problem-solving skills, and attention to detail.
• Ability to understand and troubleshoot complex equipment and systems.
• Familiarity with Microsoft Word and Excel.
• Comfortable with working at heights and lifting up to 20 kg repeatedly.
• A customer-focused mindset with a strong sense of teamwork

Duties and Responsibilities

1. Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.

2. Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.

3. Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.

4. Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.

5. Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

6. Ensure spares, tools and equipment used are in good condition and calibrated if necessary.

7. Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

8. Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System

9. Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

10. Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

11. Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.

12. To support the group during incidents, accidents and emergencies.

13. Ensure excellent housekeeping are maintained within all work areas.

14. Maintain a high level of work discipline and standards.

15. Perform any other task as assigned.

Highlight:

• Permanent job opportunity
• 5 days work week, normal office working hour
• Great remuneration & benefits
• Great career progression
• Location: East / Central

Responsibilities:

• Install, configure, and manage end-user laptops, desktops, printers, and mobile devices.
• Handle onboarding and offboarding processes, ensuring security and policy compliance.
• Contribute to technical documentation and help improve internal processes.
• Provide day-to-day technical support to end users and ensure the smooth running of computers, network devices and printers.
• Troubleshoot and resolve end user application issues, maintain and update technical support documentation.
• Handle asset management, maintain inventory and liaise with vendors.

Requirements:

• 2 - 5 years of IT Technical, end-user support working experience.
• Experience in creating user's account and mailboxes on AD and Exchange.
• Good knowledge on antivirus management e.g. Windows Defender, Symantec, McAfee
• Good knowledge on repair PCs and notebooks such as O/S and Office Application troubleshooting.
• Good knowledge in diagnostic of hardware issues on PCs and notebooks.
• Knowledge in vendor management such like negotiation of pricing, vendor quotation, etc.
• Able to work independently as well as in a group.
• Good organization, communication and interpersonal skills.

HOW TO APPLY:

Interested applicants, please send your latest resume to [email protected] or click on “Apply Now” and provide the below details in your resume.

• Last drawn salary
• Expected salary
• Notice period
• Reason of leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Dick Sern (Dick Sern)

EA Personnel Reg No: R22106832

Position Overview

Be responsible to research and develop innovative computer vision/deep learning algorithms for image applications.

Responsibilities

1. Research, develop and optimize computer vision/deep learning algorithms for image applications, such as, object recognition, face recognition, video analytics, image quality enhancement, and 3D reconstruction.

2. Explore, design and implement new algorithms/features according to marketing requirements.

3. Algorithm testing and verification.

4. Algorithm integration in system architecture.

Requirements

1. Ph.D. or MS with equivalent practical experience in Computer Science or Electrical Engineering or related disciplines such as Applied Mathematics/Statistics.

2. Broad knowledge in various computer vision related topics such as deep learning, object recognition (detection, classification, segmentation) and tracking, stereo, and/or 3D reconstruction; candidate with image sensor knowledge is a plus.

3. Strong knowledge and extensive hands-on experience of independent algorithm research; candidate with strong mathematics background is a plus.

4. Excellent C/C++ programming skills, proficient with scripting languages (e.g. Python or Matlab), and extensive experience with OpenCV.

5. Excellent verbal and written communication skills.

Primary Purpose:

Functions as a senior technical specialist or in a lead role in mechanical design. Works independently and applies advanced engineering techniques and analyses for problems and methods.

Responsibilities:

• Concept, Functional, Preliminary and detailed design of mechanical process systems for water and wastewater treatment plants, including screening equipment, physical-chemical treatment plants, biological treatment plants, blower equipment, odour control plants, disinfection plants and sludge treatment plants
• Concept, Functional, Preliminary and detailed design of various pumping systems for water, wastewater and sludge treatment plants
• Concept, Functional, Preliminary and detailed design of ancillary systems including chemical feed systems, mechanical ventilation systems, and drainage systems
• Preparation of General Arrangement and equipment layout drawings
• Preparation of mechanical process equipment and pump specifications
• Mechanical equipment and pipe sizing and calculations
• Review and evaluation of vendor submissions
• Coordination with other disciplines e.g. civil, structural, electrical, building services, and instrumentation & control designers
• Lead meetings, discussions with clients, contractors and vendors
• Provide engineering support for bids & proposals
• Provide engineering support during construction
• Provide engineering support during testing and commissioning
• Provides project cost estimates to client
• Design management and project management of proposals and projects where the scope is primarily mechanical / process

Preferred Qualifications

• A Professional Engineer (PE) registered with Professional Engineers Board Singapore or Chartered Engineer
• Possess a university engineering degree (mechanical)
• Candidate shall have minimum of 10-15 years’ experience in the mechanical design of wastewater treatment (municipal and industrial)
• Able to work independently in producing the project deliverables to meet project timeline
• Leads and guide a team of engineers and carries out QA/QC work on their designs
• Proficient in written and oral communication with good interpersonal skills

Responsibilities

• Carry out calibration work both in-house and on-site.
• Prepare calibration report.
• Maintain test equipment.
• Maintain TAT as per Setsco timeline.
• Involve in quality and safety activities.
• Maintain 5s at lab.
• Other duties assigned by Superior.

Requirements

• Experience in performing any calibration of Mechanical, Temperature and Electrical instruments.
• Excellent Technical & Analytical skill.
• Able to use MS Office (Word, Excel).
• Possess class 3 Driving License will be an advantage.
• Able to work with multiracial people and communicate well with others.
• Candidate must possess at least a Nitec/Higher Nitec or equivalent.
• Freshers are welcome, training will be provided.

Responsibilities:

• To support the construction team for M&E engineering works.
• Oversee and ensure works are carried out in accordance with the approved drawings, materials and method statements.
• Conduct inspections for all M&E systems.
• Ensure all M&E and related works carried out by contractor are planned and executed to the requirements of the project.
• Liaise with consultants, clients and subcontractors on M&E works progress, coordination and decisions.
• To involve, support and assist other aspects of operational needs when assigned.

Job Requirements:

• Degree in Mechanical & Electrical Engineering.
• Min 5 years M&E building service experience.
• Knowledge of AutoCAD added advantage.

Responsibilities:

• To support the construction team for M&E engineering works.
• Oversee and ensure works are carried out in accordance with the approved drawings, materials and method statements.
• Conduct inspections for all M&E systems.
• Ensure all M&E and related works carried out by contractor are planned and executed to the requirements of the project.
• Liaise with consultants, clients and subcontractors on M&E works progress, coordination and decisions.
• To involve, support and assist other aspects of operational needs when assigned.

Job Requirements:

• Degree in Mechanical & Electrical Engineering.
• Min 5 years M&E building service experience.
• Knowledge of AutoCAD added advantage.

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Industry/ Organization Type: Precision Manufacturing
• Position Title: Lead Engineer (Engineering Design department)
• Working Location: Zhuhai, China
• Working Hours: 5 Days, Mon-Fri (8 am-5.30 pm)
• Salary Package: Basic Salary (Up to￥30K) + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Coordinate and align the Engineering teams and resources with the objective of “Design for Manufacturing” to achieve product leadership in the related industry.
• Understand, communicate, and manage the core needs of customers’ design and their requirements.
• Offer cooperation and support on Engineering needs as required by other departments.
• Operate as a team player with the ability to collaborate with other Department Heads in achieving corporate objectives.
• Lead engineering initiatives to ensure product designs are optimized for manufacturing and industry leadership.

APPLY NOW!!!

• Degree in Mechanical Engineering or its equivalent.
• Minimum 10 years of relevant working experience in the related industry.
• Excellent communicator with strong organizing and leadership skills.
• Knowledgeable in material substrates such as elastomer (Silicone rubber), plastics and metal.
• Hands-on experience with Pro-E Creo and Unigraphics (NX)/ AutoCAD software.
• Exposure to managing Product Development of component parts relating to Silicone Rubber, Plastics and Metal (any 2 out of 3 required substrates is acceptable) with client’s 2D/ 3D drawings.
• Possess some secondary process and tooling knowledge.
• Good rapport in interfacing and negotiating with local and global customers on Product and Engineering Development.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to anraduscn.researcher01(at)gmail.com. Please indicate #67118 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Responsibilities:

• Prepare reports, designs and drawings.
• Make calculations about pressures, loads and stresses.
• Consider the strength of construction materials and select appropriately.
• Provide technical advice on safe designs and construction.
• Obtain planning and/or building regulations approval.
• Analyze configurations of the basic components of a structure.
• Monitor and inspect all work undertaken by contractors to ensure structural soundness.
• Inspect properties to evaluate the conditions and foundations.
• Use computer aided design technology for simulation purposes.

Requirements:

• Degree in Civil or Structural Engineering
• Professionally registered with the Institute of Structural Engineers.
• Expert experience in project management.
• Advanced knowledge of construction methods, materials and legal regulations.
• Sound understanding of physics and mathematics.
• Ability to liaise with professionals from other disciplines.
• Meticulous attention to detail with the superb organizational skills.
• Ability to work under pressure and meet tight deadlines.
• Excellent communication and IT skills.

About the Role

• Conduct testing and commissioning of lift systems to ensure functionality and compliance with safety standards.
• Diagnose and troubleshoot issues related to lift installations and electrical systems.
• Collaborate with project managers to coordinate on-site activities and ensure timely project milestones.
• Oversee the handover process, including documentation and client communication.
• Ensure all work complies with regulatory standards and company safety procedures.
• Liaise with clients, contractors, and other stakeholders to ensure smooth project execution.

About You

• Minimum NITEC in Mechanical Servicing or Vertical Transportation
• Minimum 2 years’ working experience in lift maintenance
• Required to do standby duty at night and / or weekends
• Team player and the ability to handle work under pressure

Why join Cushman & Wakefield?

As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from;

• Being part of a growing global company;
• Career development and a promote from within culture;
• An organisation committed to Diversity and Inclusion

We're committed to providing work-life balance for our people in an inclusive, rewarding environment.

We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development opportunities to develop personal, professional and technical capabilities, and we reward with a comprehensive employee benefits program.

We have a vision of the future, where people simply belong.

That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, gender, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status. We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us.

Our client is a manufacturer of machines that offers automated solutions for the pharmaceutical industry and healthcare facilities.

• Responsible for the design of controls system and programming coding.
• Modify controls design and other documents according to the company standards and compliance to industry standards.
• Develop specific program as per project requirements based on company coding standard.
• Support in controls and validation activities, conduct test and debug, internal buy-off, FAT and SAT.

Requirements:

• Diploma in any relevant engineering discipline
• At least 5 years of PLC experience in using Allen Bradley and Siemens-S7 programming.
• Good communication and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities

• Plan, execute, monitor and control the various technical aspect of the project.
• Manage or participate in new setup or upgrade of system/network infrastructure projects.
• Responsible for supporting operational systems satisfying contractual Service Level Agreement
• Perform and manage routine preventive maintenance and operational activities
• Provide project documentation and reports
• Diagnose and rectify technical issue

Requirements

• Experience in Windows server OS, Unix/Linux OS & VM environment
• Good knowledge and hands-on experience with Microsoft SQL Server would be an advantage
• Good Working knowledge with VPN, firewall appliances and Cisco routers/switches
• Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment
• Pro-active, dynamic and with good analytical/conceptual thinking
• Fresh graduates are welcome to apply

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

About the job:

• Perform troubleshooting for client platform related problems.
• Respond promptly to incident, investigate & provide temporary &/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties.
• Perform service request related to client platforms.
• Monitor the agreed service level, document & maintain the configuration of the systems; provide regular reporting to relevant parties.
• Involve in client platform implementation/upgrade project.
• Manage client platform implementation/upgrade project.
• Perform on research/evaluation of client platform tools.
• Provide systems related technical advice to customers or project team.
• Manage client platform management systems.
• Manage systems changes through change request process & provide status reports to the relevant parties.
• Perform client platform related presales tasks.
• Gather business &/or application requirements on the infrastructure to perform the infrastructure requirement analysis & design.
• Ensure service level meet requirement. Propose and implement action plan when required.
• Established facility management standards/best practices to ensure operation consistency across project/facility management teams.

About you:

• At least Diploma in relevant to IT
• Knowledge in troubleshoot Window 10
• Minimum 1 year of experience in WOG project.

There’s nothing more exciting than being at the center of a rapidly growing field in technology and applying your skillsets to drive innovation and modernize the world's most complex and mission-critical systems.

As a Site Reliability Engineer III at JPMorgan Chase within the Corporate Technology, Trade Surveillance, you will solve complex and broad business problems with simple and straightforward solutions. Through code and cloud infrastructure, you will configure, maintain, monitor, and optimize applications and their associated infrastructure to independently decompose and iteratively improve on existing solutions. You are a significant contributor to your team by sharing your knowledge of end-to-end operations, availability, reliability, and scalability of your application or platform.

Job responsibilities

• Guides and assists others in the areas of building appropriate level designs and gaining consensus from peers where appropriate

• Collaborates with other software engineers and teams to design and implement deployment approaches using automated continuous integration and continuous delivery pipelines

• Collaborates with other software engineers and teams to design, develop, test, and implement availability, reliability, scalability, and solutions in their applications

• Implements infrastructure, configuration, and network as code for the applications and platforms in your remit

• Collaborates with technical experts, key stakeholders, and team members to resolve complex problems

• Understands service level indicators and utilizes service level objectives to proactively resolve issues before they impact customers

• Supports the adoption of site reliability engineering best practices within your team

Required qualifications, capabilities, and skills

• Bachelor’s Degree in Computer Science, Engineering, Mathematics or other related disciplines

• 3+ years or equivalent expertise in site reliability engineering

• Proficient in site reliability culture and principles and familiarity with how to implement site reliability within an application or platform

• Proficient in at least one programming language such as Python, Java/Spring Boot, and .Net

• Proficient knowledge of software applications and technical processes within a given technical discipline (e.g., Cloud, artificial intelligence, Android, etc.)

• Experience in observability such as white and black box monitoring, service level objective alerting, and telemetry collection using tools such as Grafana, Dynatrace, Prometheus, Datadog, Splunk, and others

• Experience with continuous integration and continuous delivery tools like Jenkins, GitLab, or Terraform

• Familiarity with container and container orchestration such as ECS, Kubernetes, and Docker

• Ability to identify new technologies and relevant solutions to ensure design constraints are met by the software team

• Ability to initiate and implement ideas to solve business problems

To apply for this position, please use the following URL:

https://ars2.equest.com/?response_id=fc93f9317fec3db0b109f54bf05b37b7

Position Overview:

Develop image/video processing algorithms for camera related applications.

Responsibilities:

1. Expand existing solutions to new levels of functionality, quality, and performance.
2. Assist other teams with algorithm implementation, testing and verification
3. Drive the productization of the hardware.
4. Algorithm documentation
5. Collaboration with external researchers.

Requirements:

Key Qualification:

1. BS/MS/PhD in Electrical Engineering, Computer Science or equivalent.
2. Knowledge of image processing algorithm development;
3. Good understanding of digital photography, image quality assessment.
3. Proficiency in C/C++
4. Demonstrate great teamwork, outstanding communication skills, and willingness to learn.

Advantageous:

1. Farmiliar with image and color processing techniques, including HDR, AWB, color correction, noise reduction, IR removal/suppression and CFA demosaicing, etc.
2. Proficinecy in developing, implementing and deploying image processing algorithms for ISPs, or CMOS image sensors
3. Strong mathematics background and track record of independent algorithm research.

• Shall perform the following administration activities for storage and automate them to the extent possible:
• Storage Area Network
• Provide Installation, administration and maintenance support for Storage Area Network and Enterprise Backup.
• Health check and monitoring of the storage devices.
• Integrate the storage solution’s hardware and software into the customer’s operating environment and ensure full interoperability.
• Regularly update the firmware.
• Ensure comprehensive documentation of the storage solution is in place.
• Prepare test plan in consultation with the customer to ensure the solution can function fully.
• Enterprise Backup Administration and management of Symantec or Commvault backup environment.
• Backup job configuration and scheduling.
• Backup server performance tuning.
• Troubleshoot any backup related.
• Capacity planning for tape libraries and backup servers.
• Perform Disaster Recovery (DR) for all the critical systems and ensure successful rebuild of Production or DR servers after each DR should the need arise.
• Identify potential changes and system improvements for consideration and implementation (continuous improvements)
• Create, maintain and distribute reports of progress to Technical Operations Manager.
• Any other ad-hoc tasks assigned.
• Minimum requirements the resource(s) personnel assigned must be a certified Storage (SAN) and/or Backup Administrator in administration and troubleshooting.
• He/she is/are expected to cover level 1 and level 2 storage related problems and must be an experienced administrator in the following technologies:
• Good knowledge of EMC, Hitachi, and Huawei storage systems