Total 21,400 process engineer job vacancies in Engineering category in Singapore

Responsibility:

• Develop, enhance, and maintain threat detection use cases within Splunk ES and custom rules in CrowdStrike EDR.
• Align detection capabilities with the MITRE ATT&CK framework for transparency and effectiveness.
• Collaborate with SOC for continuous improvement and challenge detection mechanisms.
• Proactively create and fine-tune detection use cases using advanced analytics and machine learning.
• Ensure compliance and optimize performance by validating new log sources and data models.
• Drive operational stability and quality improvements through effective collaboration with the Service Operations team.

Technical Skills:

• Proficient in Splunk Enterprise Security (ES) and developing detection use-cases.
• Experience with Machine Learning and Risk-Based Monitoring in Splunk is advantageous.
• Strong analytical skills to interpret security logs and identify potential threats.
• Familiarity with common interface models (CIM) and data model utilization in Splunk.
• Deep understanding of cybersecurity concepts and attack lifecycle phases.
• Knowledgeable about the MITRE ATT&CK framework and various detection techniques.
• Ability to create interactive dashboards, alerts, and reports in Splunk.

Experience:

• Minimum 3 years of demonstrated experience in SIEM use-case engineering.
• Over 5 years of experience in cybersecurity.

• Responsible for completing all assigned Utilities operations activities, ensuring accurate documentation completion for CGMP systems including boilers, regeneration processes, waste water treatment blowers, pumps, compressed air system, HVAC, air & Nitrogen systems.
• Support Facility Operations, take equipment readings & update logbooks and oversee a team of 24/7 technicians for operations.
• Troubleshoot and diagnose equipment to determine the root cause and perform root cause analysis.
• To negotiate with original equipment manufacturer (OEM) or subcontractors on the repair, replacement and maintenance of the equipment.
• Carry out repair of equipment such as replacing faulty parts (eg. Bearing, mechanical seal and etc), shaft alignment, clear blockages, rectify leaks and cleaning equipment parts and etc.
• Re-assemble, re-install, test run and monitor equipment after repair before putting the equipment online.
• Ensure permit requirements are met for all Utilities operations activities, conduct routine condition monitoring of machine (eg. Vibration, noise, corrosion, temperature, pressure data recording and trending), as required.
• Ability to ensure all related contractors are properly on-boarded through the vendor management system.
• Ability to communicate and Escalate incidents in case of emergency situations.
• Coordinate with contractors for the facility repair / trouble shoot jobs,
• Carry out scheduled preventive maintenance of facility equipment such as boilers, regeneration processes, blowers, compressors, pumps.
• Perform mechanical maintenance (and provide feedback) as scheduled by the MP (Maintenance Planner) Scheduler to ensure a high quality and continuous improving maintenance.
• Maintain cordial work relationship with client, colleagues and contractors.
• Uphold high standards of integrity and transparency and ensuring GMP related compliances are not comprised.
• Ensure all standard operating procedures are met and completed.
• Participate in Tier 1 / 2 and 3 if necessary.
• Any other tasks as and when assigned by his Supervisor/Manager.

Interested Applicant, kindly contact, Puteri : 98638055

Job Description

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success, we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail and supply chain.

We are currently looking for UC Operations Engineer who has proven track record in IT Industry. This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

UC Operations Engineer

Job Summary:

• Acts as primary IT representative for all meeting room, collaboration space, and telecom system builds for new facility projects (new builds and refreshes)
• Provides support for hybrid, in-person, and virtual meetings including configuring webinar settings, controlling in-meeting functions, and operating AV equipment such as microphones and presentation laptops
• Monitors and troubleshoots existing meeting room and telecom systems deployed in various facilities

Responsibilities
• Reviews construction plans for new meeting rooms and specifies correct room requirements according to client’s Global AV Standards
• Reviews telecom needs with project stakeholders and creates programming sheets for telecom system programming
• Assists project team with procurement of telecom hardware
• Assists project team with procurement and oversight of audiovisual vendor for assigned projects
• Supports vendor and internal stakeholders with commissioning and validation of new telecom and audiovisual systems
• Coordinates and plans upcoming meetings and webinars with meeting stakeholders including executive administration and corporate real estate teams
• During meetings and webinars, engineer may be responsible for controlling Q&A, recording, muting audience and advancing presentation content as coordinated with meeting hosts
• After conclusion of meetings/webinars, engineer will coordinate delivery of post-meeting materials (recording links, chat transcripts, etc.) to event hosts
• Monitors alerting platform for trouble with in production room systems and coordinates response from internal company resources and external vendors when necessary
• Provides timely updates to trouble tickets and project status using appropriate tools

Qualifications
• 3+ years experience
• AVIXA CTS, CTS-D, CTS-I certifications preferred

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected] Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS:

Consultant Name : Seema Verma

Avensys Consulting Pte Ltd

EA Licence 12C5759

Privacy Statement:

We take your personal data protection seriously and adhere to both EU and local data protction regulations.

Upon submission of your CV, you grant Avensys Consulting permission to retain your personal information in our electronic database, unless you specify otherwise. This data will be used to evaluate your suitability for current and potential job openings within our organization. Should you wish to have your personal data removed at any point, a simple notification to us will suffice.

Rest assured, we will not disclose your personal information to any third parties, and we remain steadfast in our commitment to providing equal opportunities to all applicants.

Specific Responsibility:

• Performing lab-scale and pilot-level compounding of new polymer / filler systems.
• Performing injection molding to prepare the test specimen for plastic testing.
• Ensures that lab machinery is operated following established processing, quality, safety, and housekeeping procedures.
• Cleans and prepares machinery for efficient changeovers and subsequent compounding & injection molding process.
• Trouble-shoots processing problems to ensure production of quality products.
• Keep complete and accurate records of process records.
• Assists routine maintenance of machinery & auxiliary equipment.
• Maintains surrounding work area according to established housekeeping standards.
• Complies with established safety policies and procedures.
• Performs other duties as required.

Job Requirements:

· Support, assist other aspects of Engineering Centre operation as and when necessary.

· Diploma in Science or Engineering, preferably in material science, polymer technology or chemical engineering.

· Fresh graduate or 2 years working experience with polymer processing.

Experience in polymer compounding & injection moding will be an added advantage.

Who we are

Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative, but work well within a team.

What we offer

Fugro provides a positive work environment as well as projects that will satisfy the most curious minds. We also offer great opportunities to stretch and develop yourself. By giving you the freedom to grow faster, we think you’ll be able to do what you do best, better. Which should help us to find fresh ways to get to know the earth better. We encourage you to be yourself at Fugro. So bring your energy and enthusiasm, your keen eye and can-do attitude. But bring your questions and opinions too. Because to be the world’s leading Geo-data specialist, we need the strength in depth that comes from a diverse, driven team.

Our view on diversity, equity and inclusion

At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘together create a safe and liveable world’ – and to each other.

Summary

Geotechnical Engineer provides accurate and customised services to clients by

• Performing geotechnical work around the process of acquiring, analysing, engineering and interpreting of complete and high-quality geotechnical data
• Provides geotechnical advice in one or a small number of specialised technical disciplines
• Develop solutions to clients by putting acquired geotechnical data into context
• Typically follows prescribed guidelines and procedures but may deviate.
• Provides on-the-job training to more junior colleagues.
• Receives a moderate level of guidance and direction.

Reports to a Senior Engineer appointed by Department Head.

Responsibilities

• Perform technical assignments with supervision.
• Assist Site Manager or Lead Project Engineer on routine and non-routine field projects.
• Assist in planning and coordinating field investigations covering budget monitoring and job schedule.
• Assign laboratory tests and monitor progress through the laboratory.
• Evaluate field and lab test data, and develop foundation soil parameters.
• Prepare field, laboratory and engineering reports for final review by senior staff.
• Assist other professionals with technical training, proposals, invoices and marketing.
• Assist senior engineers in related project administrative tasks
• Perform other engineering related operations as and when required.
• Ensure that field projects meet HSSE requirements.

Requirements

• Bachelor’s Degree in Civil Engineering or equivalent.
• Good analytical and communication skills ( both written and verbal).
• Good knowledge of MS Office.
• Able and willing to travel, and work offshore.
• Responsible, hardworking and able to work and think independently.

How to apply

• Please include your latest resume in the application.
• Please describe your working rights in Singapore (work pass sponsorship is subject to quota and availability).
• We regret to inform that we will only process applications made via our Careers website (and other linked portals) and only shortlisted applicants will be contacted.

• Part of IT Application team delivering end-end solution to support AMF’s business needs.
• Providing technical solution, developing, and supporting various applications in one or more of the following areas/platforms: MES, CIM, ERP, Reporting/BI, and Analytics.
• Support, monitoring and maintaining the application systems to meet AMF’s business requirements.
• Identify, propose, and implement strategies for efficient and effective adoption and/or usage of application systems.
• May be assigned to other ad-hoc project assignment to support organization objectives.

Job requirements:

• Bachelor’s Degree in Computer Science, Computer Engineering, Electrical Engineering, Information Technology, or related qualification with 5-8 years relevant working experience
• In-depth knowledge and experience in one or more of the following SOAP, RESTful APIs, JSON, HTML5, CSS, JavaScript, jQuery, Ajax, Programming languages such as C++, Java, .Net, Power Platform, Outsystems, Python, R.
• In-depth knowledge and experience in database and languages such as Oracle and Microsoft SQL
• Experience in application design, development, and support.
• Experience in a manufacturing environment, with knowledge of concept (Industry 4.0, Manufacturing Computer Integrated Manufacturing, Equipment Automation, Mobile Robots, RFID) and methodologies such as ISO, Lean or
• 6-sigma would be advantageous.

Job Description:

- Successful candidates will be trained to obtain Nokia / Cisco/ Juniper as fiber
optic technicians with skills in installation, troubleshooting, and confident decisionmaking.
- Proficiency in understanding electronic components, computer operating systems,
cabling, electrical components, and use of hand/power tools.
Certifications to be obtained after the training.
• CFOT, CPCT (Certified Premises Cabling Technician), CFOS (Certified Fiber Optics
Specialist), and other options tailored to specific fields.

Role Overview:
• Integral role in the telecommunication industry, ensuring connectivity through
telephone, high-speed internet, and television.
• Responsibilities include installation, maintenance, troubleshooting, and technical
assistance in designing and testing fiber optics.
• As a customer-facing professional, the role requires providing quality customer
service with efficiency and professionalism.

Typical Day:

• Involves tasks in various building types, including commercial structures, office
buildings, and private homes.
• Tasks include resolving, repairing, and installing fiber optic systems, conducting
maintenance routines, splicing fibers, and maintaining system records.
Education and Certifications:
• Consider post-secondary training in electronics, telecommunications, or computer
technology.
• Industry certifications such as Nokia/Cisco/Juniper and Fiber Optic Association
Certified Fiber Optic Technician (FOA CFOT) are favorable

Responsiblities

Under the supervision of qualified patent attorneys to perform the following:

• Drafting, filing, and prosecution of patent applications in Singapore, China, US, PCT and other countries;
• Patent portfolio management
• Freedom-To-Operate search and analysis;
• Patentability search and analysis;
• Patent document translation (for candidates proficient in a second language)

Requirement

• Engineering or Science Degree(s) preferably in the following fields: Mechanical Engineering / Electrical Engineering / Computer Science / Materials Science;
• With stronge interests and commitments in developing a career in the patent attorney profession;
• Able and willing to work independently and proactively and under pressure;
• Excellent communication skills both oral and written;
• Preferably fluent in both English and Chinese at a professional level, e.g., able to read and write technical documents in both languages;
• Working experience in relevant fields an addded advantage, e.g., in the IP service sector, R&D, Technical support, and/or manufacturing.

Benefits Summary:

• Up to $6000 + Variable Bonus + AWS + Benefits
• 5 Days work week
• Working Location: North, East

Responsibilities:

• Organize, conduct Value Analysis and Value Engineering for the cost efficacy
• Evaluate new component requests and validate supplier information against requirements details
• Check for optimal feasibility and if necessary, make corrections or additons
• Ensure for the product change management and implementation
• Any ad-hoc duties as required

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Follow us on Facebook for more info:

https://www.facebook.com/EC-Recruitment-Pte-Ltd-113771667194961/

Text us on for more details:

https://wa.me/6582693981

Follow us on Telegram for more job opportunities:

https://t.me/ecrecruitment

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

Mechanical Engineer – Job Description

Duties and responsibilities:

As a Mechanical / Senior Mechanical Engineer you are require to perform

the following:

• Design of parts and assemblies
• Assembly of parts and sub-assemblies.
• Conduct verification & validation of design following up with reports.
• Cross functions support.
• Support production

Qualifications and Skills

• B.Eng in Mechanical Engineering
• Min 4 years experience in Product Design
• Min 4 years experience in using CAD software (Preferably Solid Works)
• Good assembly and dis-assembly skills

Other requirements

• Good knowledge of fabrication process (metal & plastics).
• Skillful hands-on skills in assembly and disassembly of products
• Conduct regular testing of subsystem under his/her responsibilities.

Job Summary

• This role is responsible for maintaining and improving the organizations cybersecurity posture on an ongoing basis. S/he will work with external experts to implement security solutions, and work with vendors to monitor, detect and contain cybersecurity incidents to minimize impact to the organization.

Responsibilities

• Review and development of security framework, information security policies, processes / procedures and guidelines on an ongoing basis
• Work with vendor to conduct security assessments and penetration tests.
• Identify security gaps, perform threat risk assessments in current setup and propose mitigating measures.
• Standardize and refine security incident response and escalation processes.
• Mitigate and contain threats when detected.
• Escalate security incidents and non-compliances on a timely basis.
• Work with IT infrastructure team to evaluate, implement and enhance the network perimeter security, endpoint security, SIEM, secured remote access, MFA, Identity Access Management and Privileged Access Management.
• Monitor information security alerts triage, mitigate, and escalate issues as needed.
• Provide security advisory to end users on regular basis.
• IT Security Management of various aspect, e.g. network security, server security, application security, end point security, email security, physical access security, logical access security, etc.
• Keep abreast of industrial IT security advancements and introduce appropriate security enhancements to IT infrastructure and systems.
• Attend to any other reasonable duties as assigned by the Senior Cyber Security & IT Governance Manager and IT Director.

Requirements

• Degree in engineering, science or information technology, or equivalent education with 3-5 years of related work experience in cybersecurity management and security governance.
• Candidates with additional experience will be considered for the Senior Cyber Security Analyst position
• Good working knowledge of security risk management, security governance framework and compliance (IT Security Audit / log review), technical vulnerability management (vulnerability assessment, penetration testing), application security, security technologies (system hardening, IDS/IPD, firewall), security incident response and security assessment.
• Strong understanding of ISO27001 standard.
• Hands-on experience at least 4 of the following IT Security Tools:Next Generation Firewall (e.g., FortiGate, Palo Alto, Cisco FirePower)
  SASE (Zscaler, Netskope, Skyhigh)
  Tenable Security Center Continuous View
  Endpoint Protection (e.g., Symantec, Trend Micro, Sophos Endpoint)
  Email Security (e.g., Mimecast, ProofPoint, Cisco Email Security)
  Data Loss Prevention (e.g., Symantec, ForcePoint, Digital Guardian)
  SIEM (e.g., Splunk, QRadar)
  CyberArk PAM and IAM
  
• Job Reference: QW8VR6R9

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

Tel: 6950 9754

EA Registration Number: R22110899

EA License number: 02C4944

EA Personnel: Celeste Wong Xin Yann

Responsibilities :

• Layout for analog and mixed signal circuits from sub-blocks to top-level integration.
• Review, analyze floor plans and complex circuits with circuit designer.
• Run a complete set of design verifications.
• Collaborate with the circuit design teams to constantly optimize layout implementation for better power, performance and area, as well as planning on work schedule.
• Understand CMOS matching layout techniques for precision analog circuits.
• Understand arrayed and pitched layout styles for Amplifiers/ ADCs/ DACs/ Decoders/ Power Device.
• Understand basic Layout issues (i.e., floor planning, bussing, pin location, etc.) and latch up/ESD requirements.
• Strong debug and problem-solving skills for LVS, DRC and layout issues.

Requirements:

• Bachelor Degree in related engineering disciplines or equivalent.
• Entry level are welcome to apply as training will be provided
• Experienced candidates with relevant skills and expertise are most welcome.
• Salary package will be offered based on working experience

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Etch department diverse team of talent.

What you will be working on:

• To assist engineers to develop, sustain and improve process capability indices to meet operations goals
• Perform shift duties to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots on hold
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Monitor and improve on the qualified process using SPC and other statistical tools
• Assist in implementing process improvement projects
• Maintain a good audit system for ISO requirements, internal and QA audit on process documentation
• Participate in continuous improvement programs to improve productivity and output quality of the module

More About You:

• Diploma in Electrical/ Electronics/ Mechatronics/ Mechanical/ Microelectronics/ Chemical Process Technology or equivalent preferred
• Candidates without experience are also welcome to apply
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Good Team Player
• Good Problem-Solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant law

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We're searching for Associate Engineer to be part of our Furnace Equipment department diverse team of talents.You will be responsible to assist the Engineers to improve and sustain equipment performance and Cpk indices to meet operations goals

What you will be working on:

• Perform 12-hour shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled preventive maintenance (PM) and calibration on a timely basis
• Assist Engineers in the installation and hook-up of new equipment
• Trouble-shoot equipment-related issues and minimize equipment downtime
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Min 2 years of relevant working experience
• Direct experience in Furnace Equipment will be advantage
• Willing to work in 12-hours shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• Assist the PM in overseeing the construction activities and progress, planning, implementation, and monitoring work schedules
• Review drawings, plans and change orders to verify the structural integrity of materials and designs, and perform complex calculations and use modelling methods
• Participate in the initial planning and bidding processes, including reviewing environmental factors, government regulations, constructions costs and risk analysis reports
• Prepare & submit shop drawings, materials and necessary documents to consultant for approval
• Ensure progress in accordance with the schedule, quality standards are maintained, site inspections are carried out and technical/drawing issues are resolved on time.
• Liaise with internal and external stakeholders
• Provide guidance to supervisors in relation to site works.
• Ensure site safety and prepare safe work procedures with safety personnel.
• Organize & deploy resource/material for project, attend site matters & complains related to project sites

Qualifications and Job Requirements:

• Minimum 5 years of engineering experience with Degree in Civil Engineering recognized by PE Board
• At least 3 years of experience in construction supervision for building / HDB project
• Candidate with more experience will be considered for senior role

Job Description

Responsible for the running of large projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical or Electrical installations, systems, equipment, facilities etc. (Several building types)

• Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes
• Surveys, tests, carries out dilapidation reports on existing electrical/mechanical installations
• Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements
• Day to day decision making on project progress and direct liaison with and provides advice to client
• Represents Company at technical meetings with customers, professional teams and contractors teams
• Ensures engineering calculations and drawings meet required robust industry and legal standards
• Leads on the coordination of engineering services

Takes a holistic view in the selection and application of engineering concepts and solutions

Job Requirements

· BSc/BEng or degree in appropriate engineering discipline or have sufficient equivalent experience

· MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent

· Working towards Chartered Eng status

· Significant experience of specification design for several building types

· Sound knowledge of key Health and Safety issues and legislation

· Knowledge of MS Office applications word, excel etc

· Ability to use IT based calculation and spreadsheet software

· Good understanding of BS standards/ UK Regulations/Codes

· Ability to prioritise own workload

· Ability to work to deadlines

· Managerial skills

· Presentation skills

Mechanical Design Engineer

• Working Hours: Monday-Friday [8.30am - 5.45pm]
• Location: Kaki Bukit
• Salary: $3,000-$4,500

Requirements:

• Degree/Diploma in Mechanical Engineering
• Degree with min 3 years design experience and Diploma with min 4 years design experience
• Good design experience in Machine Automation, Robotic Systems, Material Handling Systems and good to have experience in Fixtures & Tooling.
• Good knowledge on Solid Works / Pro E / AutoCAD
• Must able to travel in short notice & Good in Customer Engineering

Jobs Scope:

• To plan organize, co-ordinate and implement projects in timely manner
• Ensure schedule and requirements are met to customer criteria
• Participation in feasibility studies, quotation, design, product development to presentation.
• Follow up with hand on troubleshooting and training.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Airconditioning Engineers

1) Ability to lead and manage teams

2) Operation Supports to teams and clients

3) Self Motivated Individuals

4) Good Team Player

5) Experienece In Troubleshooting and Repair / Service of Split Type and VRF/ VRV systems

6) Valid Class 3 License

7) Minimum 5 years experience in Airconditioning Field

8) Possess field experience is a MUST

9) Strong troubleshooting and analytical skills

10) Prior experience working in MNCs Agent will be an advantage (I.E. Daikin, Mitsubishi, Toshiba)

Responsibilities:

• Report to M&E Manager and assist in carrying out his duties pertaining to the mechanical and electrical aspects including checking method statements, submittal documentation
• Involved in water gates installation and operations
• Monitors subcontractor works in relation to mechanical and electrical installations such as pumps, water piping, and valves
• M&E Coordination with the Civil works

Requirements:

• Degree in Mechanical Engineering or equivalent academic qualifications
• Minimum 10 years relevant working experience in M&E
• Must be experience in pumps installation and water management installations will have added advantage
• A team player
• Able to work in a fast-paced environment

To view more roles within the Construction & Engineering | Project Management Sector please visit our LinkedIn page @ Artemis Executive Solutions. We thank you for taking the time to apply but due to the high volume of applicants, we regret to inform you that only shortlisted applicants will be contacted.

EA Lic. No. 22S1050 | R1330228

Job Description:

Requires an expert with knowledge of a broad range of IT technologies.
* Proven 2years of experience as an IT professional.
* Knowledge of Linux/UNIX and/or Windows Server operating systems is essential
* Understanding of Nutanix prism, Microsoft HyperV and related virtualisation technologies
* A good knowledge of MS SQL
* An understanding of SAN, NAS and Veeam storage technologies including storage replication
* Maintain inventory and asset configuration documentation for network switches, servers and workstations.
* Ensure the implementation of IT Security System that are aligned of High Availability and Disaster Recovery
* Ensure network security, efficiency and availability for entire IT infrastructure.
* Experience of open-source software and the principals behind it. and using it
* Knowledge of capacity planning and performance measurement techniques
* Strive to learn and ability to interpret performance statistics, identify bottlenecks and translate application load projections into infrastructure utilization projections
* An understanding of Enterprise Security and IT risk management
* Some knowledge of programming languages and current software development practices such as Visual Stdio

Requirements:
- Diploma or Degree in Electronic or IT
- At least 2 years in related field
- Knowledge of VM, Microsoft Servers, Unix, VLAN and etc.
- Knowledge of server and desktop hardware troubleshooting and setup
- Strong analytical, problem solving and decision-making skills
- Ability to work Independently
- Preferable with CCNA

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We're searching for Principal Engineer to be part of our Diffusion WET diverse team of talents. You will be responsible for daily operations in the Diffusion WET Equipment modules.

What you will be working on:

• Perform corrective & preventive maintenance on equipment to maintain good quality & productivity performance.
• Provide 24×7 support for troubleshooting equipment & problem solving in Factory operations floor.
• Maintain documentations for equipment installation, maintenance and troubleshooting procedures for reference purposes.
• Develop continuous improvement to enhance equipment reliability and cost of ownership.
• Drive innovation in factory automation, processes and systems to improve productivity.
• Coordinate, supervise & develop a team of high performance equipment engineers.

More about you:

• Degree in Chemical/Electrical & Electronics/Materials/Mechanical/Microelectronics/Physics or equivalent
• Minimum 3 years working experience in WET equipment or related module
• Highly motivated & strong team player
• Possesses good communication and interpersonal skills
• Quality 1st mindset & strong analytical, problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Looking for a DevOps Engineer to do system integration and be able to use different software extensively within the Public Security Business Unit / SDI (System Development & Integration).

ROLE:

• Define test strategy, test plan and tests scenarios, while ensuring requirement traceability and complete coverage.
• Define the integration platform & installation of the system on: Windows PC (Windows, Windows Server 2016), Linux Servers, Specific devices such as biometric sensors, Databases on Oracle 12C, Complex software modules, Network and security components (e.g. Firewall and Routers).
• Perform the system integration test, system validation test, load and performance test, and high availability test.
• Investigate the issues by analyzing logs during test execution, report incidents through configuration management tool and monitor them until closure.
• Produce documents related to installation, testing or operational and administration.
• Provide training to customer and handover the system to the maintenance support team.
• Any other ad-hoc duties as assigned by supervisors.

TECHNICAL SKILLS:

• Minimum 4-5 years of related system integration experience.
• Expertise in SOAP UI.
• Strong in Scripting (Perl, Bash, Powershell, Python etc.) and Database (Oracle or SQL server).
• Strong in network domains (TCP/IP, HTTP) and security (TLS, WSS, PKI).
• Good knowledge of different OS like Windows, Windows server and Linux (RedHat).
• Hands-on skills in Linux scripting and window administration (Active Directory, GPO).
• Experience with Ansible/YAML and configuration management tool (SVN, JIRA) - good to have

Interested applicants, please email your resume to Karin Chan Wei Kien

Email: [email protected]

CEI Reg No: R1104584

EA Licence No: 99C4599

Recruit Express Pte Ltd

Job Responsibilities:

• Work with Enterprise Account Managers to review Mid and Large Enterprise markets in Singapore to identify, develop and close project and manage services opportunities.
• Presales support including Enterprise IT Infrastructure and Network Architecture Design, Configuration of Bill-of-Materials and Pricing, Customization of Technical Proposals, and other Pre-sales duties.
• Perform Individual and Seminar Presentations to prospects and customers on Huawei solutions to develop new project opportunities.
• Perform training sessions on Huawei solutions and products to end users and channel partners at least once per quarter.
• Responsible for presales aspects of tender management and response by organizing, reply and clarification on tender requests.
• Promote full range of Huawei solutions, hardware and software to enterprise and government customers, produce and deliver formal presentations and business proposals.
• Identify key customer requirements and coordinate with Product & Solution team to ensure that the requirements are deliverable.

Job Requirements:

• Bachelor degree in Information Technology/ Telecommunications/ Electrical & Electronics/ Engineering discipline or equivalent.
• Professional certificates in CCIE, CISSP, MCSE, VCP and others will be advantage.
• Knowledge of Backup, Storage and Disaster Recovery Best Practises and Methodologies.
• Knowledge of Microsoft Infrastructure technologies like Active Directory, Domain Controller, Certificate Authority etc.
• Good team player with initiative, ability to meet project timelines and work in face pace environment.
• Good communication and interpersonal skills
• Pro-active,customer-oriented with good customer communications.
• Internal training on product knowledge and on-the-job training will be provided.

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.

Job Responsibilities:

• Solution pre-sales: Provide pre-sales technical support to customers.
• Maintain good rapport with customer technical team: Manage ongoing pre-sales process, develop relationships, respond to and anticipate customer needs ith a focus on solutions.
• Perform Proof of Conduct (POC) testing and solution evaluation.
• Work with post-sales team to ensure solution is delivered as proposed.

Job Requirements:

• Degree in Information Technology, Telecommunication, Computer Science, Computer Engineering, Information Engineering & Media, Electrical & Electronics Engineering or related fields.
• Experience and good knowledge in Datacom and network solution, including router, switch, WIFI, firewall etc.
• Excellent team player with initiative, ability to meet project timelines and work independently.
• Display high-energy, outgoing, can-do personality, ability to prioritize the tasks.
• Good communication and interpersonal skills.

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.

Jobscope:

• Draft process improvement idea with the objectives to improve process / occupational safety, improve product safety / quality, reduce energy consumption, improve production capacity / productivity, and reduce costs.
• Implement Process Improvement idea via Management of Change system and/or Non-regular work system.
• Coordinate, arrange and plan new grade trial run with R&D and Operation team, and handle the trial run and the evaluation.
• Evaluate process performance and key process parameters from long term view and/or periodically to uncover potential risk that may leads to Plant instability, Safety or Quality issues.
• Troubleshoot plant trouble related to process, perform root cause analysis and propose corrective and preventive measures as process engineering function and/or based on request basis.
• Participate actively in HAZOP, FMEA and Control plan studies as Process engineering function for safety and quality improvement.
• Oversee Process related capital expenditures project from conceptual design up to Front End Engineering Design (FEED) and Lead the project assigned
• Participate in Productivity Improvements and Process improvement Projects and participate in Company EHSQ program

Requirements:

• Min. Bachelor / Master’s Degree in Chemical Engineering
• 1-3 year(s) of working experience in Petrochemical Industries (Preferred).
• Familiar with ISO9001, ISO14001, ISO45001 and SS651.
• Familiar with Process Simulation software such as Aspen Plus®, Aspen HYSYS®.
• Familiar with Distributed Control System (DCS), in particular its logic and sequence modification.
• Able to multi-task and handle a wide spectrum of responsibilities.
• Good interpersonal skills and strong analytical skills.
• Open to candidates with no prior experience will be considered

To apply, please visit www.gmprecruit.com and search for Job Reference: 22526

To learn more about this opportunity, please contact Fiona Koh

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Fiona Koh| Registration No: R1109239