Total 21,243 product engineer job vacancies in Engineering category in Singapore

Roles & Responsibilities:

To ensure the smooth operation of site activities

To provide logistical support (site utilisation) when needed, as requested by sub-contractors

To be the liaison for the coordination of different trades within the same discipline

Responsible for all on-site engineering issues pertaining to site matters

To coordinate with sub-contractors and attend to clients' queries to ensure timely work arrangements

To be involved in the day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and the local authorities’ quality standard

To manage project documentation and maintain accurate records

Ensure compliance with all health and safety regulations

Requirements:

Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification

Experience / Knowledge in in Bridge Construction/ Crosshead/ Lifting Frame /Launching Gantry Operation/ Pre-cast Segment Method/ MRT/ LTA will be an added advantage

More than 3 years of site experience in the construction sector, preferably in the superstructure crosshead/ precast segmental bridge and Launching Gantry operation or similar

Good team player and able to work independently

BCSS Certification

As a Validation Engineer, you play a pivotal role in our organization by ensuring that each product release surpasses quality expectations. Your responsibilities encompass understanding potential system failures, designing validation scenarios, and driving continuous improvement initiatives. Acting as a gatekeeper in a dynamic product cycle, you will independently plan and execute tests, maintain automation scripts, and collaborate with cross-functional teams to uphold internal quality standards.

Key Responsibilities:

• Independently plan and draft test specifications, methods, and instructions against product hardware and software performance requirements.
• Maintain, update, and develop test automation scripts to enhance testing efficiency, data collection, and analysis.
• Oversee Product Design Validation, Testing, and Documentation to ensure alignment with internal quality standards.
• Collaborate with key stakeholders on test equipment setup, availability, and specifications.
• Manage the entire testing process, from planning and development to execution, inspections, root cause analysis, documentation, and failure analysis.
• Develop and maintain validation schedules, coordinate test resources, and communicate status/blockers to program managers.
• Conduct ad-hoc troubleshooting and preventive maintenance of test robots.
• Analyze system requirements and implement system verification tests.
• Provide feedback to product and system design/development teams.
• Develop new test methodologies and specify test fixtures.
• Execute system tests manually and using developed automated tests.
• Guide, develop, and supervise junior engineers in verification activities.
• Follow test processes and identify opportunities to improve process efficiency.

Qualifications:

• Degree or equivalent experience in electronic engineering, software, or a comparable engineering discipline.
• Basic working understanding of Electrical and Mechanical Systems.
• Hands-on experience with Selenium, Embedded C, SQL, and/or Python is advantageous.
• Knowledge in developing Proof of Concepts is preferred.
• Assertive and creative individual with excellent problem-solving skills, able to thrive in a highly ambitious and fast-paced environment.
• Excellent communication skills for effective coordination with cross-functional teams.
• Ability to work within a multidisciplinary, Agile team, using Scrum or Kanban methodologies.
• Experience with NI or other remotely controlled instrumentation.
• Knowledge or experience working with sensors/actuators is a plus.
• Ability to communicate complex ideas to experts in different fields.

• To develop, document and support the build of high precision plastic injection tooling and molded parts for manufacturing.

• Support Program team during upfront new project quotation stage by providing accurate upfront tooling/product DFM that matches the right quality requirements.

• To meet customer for DFM and mold concept review to ensure customer’s technical requirements and concerns are addressed.

• Support Tooling Department by conducting internal tooling design and DFM reviews before tool launch.

• Support Production in areas like molding process optimization, implement manufacturing fixtures and automation for reliability and efficiency improvements.

• Support Quality Team in the design and fabrication of test/measurement fixtures.

• To coordinate mold trials, tooling and molded part troubleshooting and carry out necessary engineering changes to ensure parts can be produced smoothly with the required quality.

Your areas of knowledge and expertise that matter most for this role:

• Excellent technical analytical ability with strong interest for problem solving.

• Self-motivated team player with good interpersonal and communication skills.

• Past working experience or knowledge of Precision Tooling Design/Fabrication, Micro Plastic Injection Molding Process or Manufacturing Process Engineering related field preferred.

• 3D CAD software skill for Siemens UG NX or PTC Creo 4.0 and above

*Please note that Cyrus is in the process of relocating its office to Loyang by Q4 2024.

• Assist project manager in planning and execution of project plans at the construction site,
• Execute project plan and ensure works are completed as per the schedule and in accordance with contract specification and design drawing.
• Ensure the construction site fulfills the authority's code of practice and complies with house safety rules & regulations.
• Handle correspondence job paperwork and submission.
• Liaise with all parties involved in the project, including authorities, consultants, clients, subcontractors, and suppliers.
• Attend site meetings and inspections, regularly report on progress, and monitor the schedule.
• Prepare site meeting minutes, monitor work schedules, project costing, and procurement, and coordinate with all parties to ensure work progress is completed within the target time and budget.
• Supervise and report the progress of the work to the Project Manager.
• Update construction drawings,
• Give feedback to the project manager on any issue encountered on-site and propose a feasible solution.
• Any other ad-hoc duties assigned by the Project Manager,
• Review of civil & structural working drawings and shop drawings
• Organizing regular meetings with sub-contractor’s technical teams to resolve technical problems in pre-construction and construction phase.
• Preparation of RFI for site inspection for construction, MPI test, welding works and post concrete works and also involving in site inspections with RTO.
• Reviewing and site supervision of site work.
• Assisting project manager for planning and preparing daily progress reports.
• Tracking and optimizing manpower for each works.

• Design, analyze, and supervise structural components, including formwork and precast elements, in alignment with project specifications.
• Coordinate with the construction team to ensure effective integration of structural designs into the overall project.
• Review and approve structural designs and calculations, focusing on the stability and durability of high-rise building components.
• Conduct inspections and assessments of structural work to ensure compliance with industry standards and safety regulations.
• Work closely with architects, project managers, and other engineers to address technical challenges and develop effective solutions.

Requirements:

• Bachelor’s Degree in Civil or Structural Engineering.
• Minimum of 5 years of experience in structural engineering within high-rise building construction.
• Proven expertise in precast components and system formwork for office buildings.
• Strong problem-solving skills with a meticulous eye for detail.
• Ability to work collaboratively in a team and communicate effectively across disciplines.

Responsibilities:

- Design, build, and manage secure, scalable, and efficient cloud-based

systems on Google Cloud Platform (GCP)

- Develop and deploy cloud-native applications using GCP services such

as Compute Engine, App Engine, Kubernetes Engine, and Cloud Storage

- Migrate on-premises infrastructure to GCP, ensuring minimal

downtime and optimal resource utilization

- Ensure compliance with security and regulatory requirements,

implementing Identity and Access Management (IAM) and other

security measures

- Collaborate with cross-functional teams to identify business

requirements and develop technical solutions

- Optimize system performance, monitoring, and logging using GCP tools

like Stackdriver and Cloud Monitoring

- Stay up-to-date with GCP innovations and best practices, applying

expertise to continuously improve cloud architecture

Requirements:

- Google Cloud Certified - Professional Cloud Developer or Cloud

Architect certification

- 2+ years of experience in cloud computing, preferably with GCP

- Strong understanding of cloud architecture, migration, and

deployment

- Proficiency in programming languages like Java, Python, or C++

- Experience with agile development methodologies and version

control systems like Git

- Excellent problem-solving skills and attention to detail

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to A-IT Software Services Pte Ltd’s PDPA and e2i PDPA.

• Plan, build and optimize infrastructure setup, design and performance.
• Manage backend information systems, including of virtual machines and virtualization platform, including of network storage, backup, Fibre channel switches.
• In-depth experience in Linux administration. Need to be expert level
• Strong understanding of High Availability setup for Linux/Windows applications (etc. webs, database)
• Strong network fundamentals – IPv4/IPv6 – addressing, NAT, Routing
• Network and Systems troubleshooting and maintenance
• Good to have disaster recovery planning and execution
• Private cloud administration experience is a must – VMWare / Hypervisor
• In-depth experience in DNS, DHCP, Proxies, Linux firewalls & network security is a must.
• Maintain and Administer Security Appliances of different projects
• Design and propose a plan that will improve the hosting service of the Data Center

• Upkeep record of department equipment/assets.
• Execute both static and dynamic measurement such as dimension control and flow measurement not limiting to shore/ship tanks, piping, flow meters and instrument validation for custody transfer purposes.
• Process data collected and prepare all necessary reporting for review.
• Assist in the development and training of staff to required level of expertise.
• Ensure that all operations are conducted within client’s health and safety requirements.
• Assist in the implementation of department Quality system per the QA Manual.
• Perform any other task that may be assigned from time to time by Management.
• All jobs done in accordance to SGS Standard Procedures and/or Local Procedures where applicable.

Requirements:

• Diploma or equivalent in the field of Electrical or Electronic Engineering discipline
• Preferably 2 years of working experience
• Good computing skills and knowledge
• Possess local class 3 driving licence will be an added advantage
• Good communication, negotiation and interpersonal skills
• Good team player, works well under pressure and able to challenge status quo
• Able to work independently and to coordinate several activities simultaneously
• Able to ensure that process flow and work delivery is accurate and timely
• Able to give best customer care and services
• In addition, an added advantage for candidate who possess one or more of the following skills as follows:
• Instrumentation validation/verification/flow measurement
• Dimension control measurement via Total Station or theodolite
• Good computer knowledge in MS Office particularly Advanced Excel
• Any 3D software knowledge, autocad, etc…
• Coding or programing capability

• Plan, build and optimize infrastructure setup, design and performance.
• Manage backend information systems, including of virtual machines and virtualization platform, including of network storage, backup, Fibre channel switches.
• In-depth experience in Linux administration. Need to be expert level
• Strong understanding of High Availability setup for Linux/Windows applications (etc. webs, database)
• Strong network fundamentals – IPv4/IPv6 – addressing, NAT, Routing
• Network and Systems troubleshooting and maintenance
• Good to have disaster recovery planning and execution
• Private cloud administration experience is a must – VMWare / Hypervisor
• In-depth experience in DNS, DHCP, Proxies, Linux firewalls & network security is a must.
• Maintain and Administer Security Appliances of different projects
• Design and propose a plan that will improve the hosting service of the Data Center

Why Join Us?

• Attractive Newcomer Bonus
• Saturday work allowance
• Career Progression & Development Opportunities
• Opportunity to Work Alongside an Innovative Team
• Comprehensive Leave Packages (e.g: additional leave, birthday leave, eldercare leave, marriage leave & gift, etc...)
• Annual Executive Health Screening

Job Responsibilities:

• Develop, maintain and manage working relationships with clients and all related parties.
• Manage and implement overall project.
• Coordinate with Project Manager on project matters
• Supervise and provide advice to junior Project Engineer(s)
• Check working drawing, identify discrepancies for resolution
• Keeping track on variation and claims of contract
• Perform project cost review on a regular basis and on identified areas.
• Plan and manage project schedule to ensure timely delivery.
• Perform incoming inspection on project materials delivered on site by suppliers or vendors.
• Site coordination with subcontractors, supervisors and clients.
• Ad-hoc duties as assigned by superior(s).

Job Requirements:

• Degree in Civil & Structural Engineering (Certificates must be recognized by PE Board).
• Has relevant experience in infrastructure projects, e.g. roads and rail projects
• Open to fresh graduates with training provided for skill development and guidance
• Possess skills, knowledge and ability to supervise and manage project effectively
• Independent, resulted-oriented and self-driven team player with good communication skills

Job Descriptions:

*Assist the Project Engineer and Project Manager in project planning and to co-ordinate and oversee all works on the site.

*Monitor & co-ordinate the works with supervisors.

*Handling of technical and engineering problems.

*Assist in planning, programming and monitoring of construction works progress.

*Liaison with client's representative, relevant authorities and consultants.

*Identify and assess any foreseeable risk arising from the workplace or work processes, minimise environmental impact associated with the construction activities.

*Take reasonable practical measures to eliminate any foreseeable risk to any person who is at the workplace.

*Ensure safe work procedures and environmental control measures are implemented at the work site.

Job Requirements:

*Degree in Civil / Structural Engineering or its equivalent.

*Preferably Degree be recognized by Board of Engineers.

*Minimum 3 yrs experience in Residential Construction Industry.

About Us

The Lindner Group is Europe’s leading manufacturer and contractor for the building envelope, interior fit-out and insulation. With a workforce over 8000, Lindner operates numerous production facilities and subsidiary companies in more than 20 countries from our main office in Arnstorf, Germany.

Lindner Facades Asia Pte Ltd (LFA) was successfully re-launched in May 2019, as part of the Lindner Steel & Glass operation. Located in Singapore, LFA will be used as a base to promote and secure projects for LFA and Lindner Group in the vast and promising Asian market.

Our projects will cover the Asian markets, which include India, Philippines, Indonesia, Malaysia, Myanmar, Thailand and Vietnam. Enquires have also been received from Cambodia, Bangladesh and Sri Lanka.

LFA offers pre-sales consultation and planning advice, design and engineering, project management and planning, fabrication and installation. Employing a team of highly skilled, well-trained and extensive experience when it comes to LFA’S unique selling point in delivering turnkey projects with complex steel and glass, facades, skylights, curtain wall and building envelopes.Report directly to Project Manager

Duties and Responsibility·

Assist Project Manager to oversee all daily construction activities on site to meet project progress and quality goals.

· Ensure all works are carried out in compliance with safety and environmental regulations

· Ensure all works are carried out in compliance to QA/QC requirements

· Convey proper instructions to subcontractors to ensure all installation works are executed in accordance with approved construction drawings details

· To manage construction difficulties, safety risk and other technical issues

· Prepare installation sequence & micro schedule for respective façade elements according to construction drawings

· Coordinate with Subcontractors on all matters pertaining to site installation and quality issues

· Monitor and update daily project/site progress report

· Maintain proper records of Site Inspection Reports, materials deliveries and site activities

· Arrange & Coordinate Site Testings and Inspections with Vendors and RTO/RE

· Manage and plan site materials and equipment delivery to ensure efficient use of resources

· Co-ordinate site storage space with Main Contractor

· To assist Project Manager in timely submission of materials samples and mock-up for approval

· Checking of RC structures conditions against construction drawings and highlight any discrepancies if found on site

· To perform other duties as assigned by Project Manager.

About Us

The Lindner Group is Europe’s leading manufacturer and contractor for the building envelope, interior fit-out and insulation. With a workforce over 8000, Lindner operates numerous production facilities and subsidiary companies in more than 20 countries from our main office in Arnstorf, Germany.

Lindner Facades Asia Pte Ltd (LFA) was successfully re-launched in May 2019, as part of the Lindner Steel & Glass operation. Located in Singapore, LFA will be used as a base to promote and secure projects for LFA and Lindner Group in the vast and promising Asian market.

Our projects will cover the Asian markets, which include India, Philippines, Indonesia, Malaysia, Myanmar, Thailand and Vietnam. Enquires have also been received from Cambodia, Bangladesh and Sri Lanka.

LFA offers pre-sales consultation and planning advice, design and engineering, project management and planning, fabrication and installation. Employing a team of highly skilled, well-trained and extensive experience when it comes to LFA’S unique selling point in delivering turnkey projects with complex steel and glass, facades, skylights, curtain wall and building envelopes.Report directly to Project Manager

Duties and Responsibility·

Assist Project Manager to oversee all daily construction activities on site to meet project progress and quality goals.

· Ensure all works are carried out in compliance with safety and environmental regulations

· Ensure all works are carried out in compliance to QA/QC requirements

· Convey proper instructions to subcontractors to ensure all installation works are executed in accordance with approved construction drawings details

· To manage construction difficulties, safety risk and other technical issues

· Prepare installation sequence & micro schedule for respective façade elements according to construction drawings

· Coordinate with Subcontractors on all matters pertaining to site installation and quality issues

· Monitor and update daily project/site progress report

· Maintain proper records of Site Inspection Reports, materials deliveries and site activities

· Arrange & Coordinate Site Testings and Inspections with Vendors and RTO/RE

· Manage and plan site materials and equipment delivery to ensure efficient use of resources

· Co-ordinate site storage space with Main Contractor

· To assist Project Manager in timely submission of materials samples and mock-up for approval

· Checking of RC structures conditions against construction drawings and highlight any discrepancies if found on site

· To perform other duties as assigned by Project Manager.

• Plan, execute, monitor and control the various technical aspect of the project.
• Manage or participate in new setup or upgrade of system/network infrastructure projects.
• Responsible for supporting operational systems satisfying contractual Service Level Agreement
• Perform and manage routine preventive maintenance and operational activities
• Provide project documentation and reports
• Diagnose and rectify technical issue
• Managing and Operating Red Hat Linux, Windows VM Infrastructure
• Installation/Configuration/Hardening/Maintenance/Patching
• Maintain System Security
• Advanced Troubleshooting
• Performance Tuning
• Capacity Management
• Preventive/Proactive Support
• Incident/Change/Problem Management
• Provide system administration support and guidance for development team’s app configuration tasks
• Veritas Clustering Setup on RHEL VM would be added advantage
• Chef Automation would be added advantage
• AWS EC2 maintenance
• Managing and Operating VMware vSphere IT infrastructure

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Job Overview:

We are looking for a Technical Engineer cum Driver to join our team at LIPCO FOOD &BEVERAGES Pte Ltd. This hybrid role will require you to apply technical expertise to maintain and troubleshoot equipment within the food manufacturing process, while also handling driving responsibilities to transport goods between various locations. The ideal candidate should be flexible, hands-on, and capable of balancing both technical engineering tasks and driving duties.

Key Responsibilities:

Technical Engineer Responsibilities:

1. Maintenance & Troubleshooting:Perform routine maintenance and inspections of manufacturing equipment, machinery, and systems to ensure smooth operation.
   Identify and diagnose mechanical or electrical faults, and take appropriate action to resolve issues promptly.
   Carry out repairs and adjustments to machinery as needed to minimize downtime.
   Collaborate with the engineering team to develop and implement preventive maintenance schedules.
   
2. Installation & Setup:Assist in the installation, testing, and commissioning of new machinery and systems as required.
   Ensure the proper setup and calibration of machines according to the food manufacturing specifications and safety standards.
   
3. Technical Support:Provide on-the-spot technical support to production staff for machinery-related issues.
   Ensure compliance with safety, quality, and environmental regulations during maintenance work.
   Keep accurate records of maintenance activities, parts used, and time spent on repairs.
   
4. Equipment Improvement:Suggest and implement improvements in the manufacturing process to increase efficiency and reduce downtime.
   Work closely with the production team to ensure machinery is operating at optimal performance.
   

Driver Responsibilities:

1. Transportation of Goods:Safely operate company vehicles to transport raw materials, finished products, and supplies to and from suppliers, warehouses, or customers.
   Ensure timely deliveries and pickups, coordinating with the logistics team for route planning.
   
2. Vehicle Maintenance & Safety:Ensure the vehicle is regularly maintained, clean, and in good working condition.
   Conduct pre-trip and post-trip vehicle inspections, reporting any issues to the management team.
   Maintain accurate records of vehicle logs, fuel usage, and delivery schedules.
   
3. Staff Transportation:Transport company staff or management to various locations as needed.
   Ensure the safety and comfort of passengers during transit.
   

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Industrial Engineering department diverse team of talent. You will be responsible for supervising and coordinating production activities to meet daily and monthly manufacturing goals.

What you will be working on:

1. To achieve operation targets to meet company objectives throug
   1. Capacity: Support equipment capacity improvement/verification.
   2. Productivity: Support equipment productivity improvement.
   3. Cost: Support cost management people productivity activities.
2. Capacity check (demand/wafer start alignment) & equipment performance reporting.
3. Fab layout expansion plan & coordinate layout change activities.
4. Ensure timely equipment installation/release for production to meet operation’s needs.
5. Identify/Initiate/Track process equipment productivity improvement activities.
6. Update/maintain equipment capacity/productivity/cost database for capacity planning, productivity indices and cost tracking.
7. CAPEX planning/tracking/reporting to meet company objectives.
8. Weekly new part ID standard costing and execution.
9. Operations cost tracking/reporting.
10. People productivity support/coordination (thru automation/workflow simplification).
11. Records update & management

More About You:

• Degree in Industrial Engineering/ Mechanical/Manufacturing
• Knowledge of wafer fabrication procees, equipment configurations, layout planning, capacity planning & WPH, as well as semiconductor process flow
• Familiar with C+
• Strong communication and presentation skills
• Team player with strong problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.Maintain and improve capacity planning methodologies to ensure accuracy

Objectives of this position:

The objective of the position is to manage the extract/transform/load processes ensuring the data availability.

Responsibilities:

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

•Design, create, modify extract/transform/load (ETL) pipelines in Azure Data Fac-tory ensuring efficient data flow from source to destination.

•Ensure data accuracy and data integrity throughout the ETL processes via data validation, cleansing, deduplication, and error handling to ensure reliable and us-able data being ingested.

•Monitor the ETL processes and optimize ETL pipelines for speed and efficiency, addressing bottlenecks, and ensuring the ETL system can handle the volume, ve-locity, and variety of data.

•Participate in data modeling, designing of the data structures and schema in the data warehouse to optimize query performance and align with business needs.

•Work closely with different departments and IT team to under-stand data requirements and deliver the data infrastructure that supports business goals.

•Provide technical support for ETL systems, troubleshooting issues and ensuring the continuous availability and reliability of data flows.

•Ensure proper documentation of data sources, ETL processes and data architecture.

Requirements:

3 to 5 years of data engineering in Snowflake

3 to 5 years in upstream / downstream Retail industry and/or Supply Chain / Manufacturing domain

Sound Understanding of data quality principles and data governance best practices

Proficiency in data analytics languages like Python, Java, Scala, etc.

Knowledge of big data technologies like Hadoop, Spark and distributed computing frameworks to manage large scale data processing.

Proficient in using version control systems like Git for managing code and configurations.

SnowPro Core Certification and SnowPro Advanced Certification will be advantage

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

· We are looking for a seasoned AWS Technical Architecture to design, implement, and optimize our cloud infrastructure on AWS.

· The ideal candidate will have extensive experience with AWS services, infrastructure automation using Terraform, and in-depth knowledge of networking, compute, storage, database, monitoring, and alerting solutions.

· This role is critical to ensure our cloud infrastructure is secure, scalable, and efficient.

Top Mandatory skills

· Cloud Architecture and Design

· Infrastructure as Code (IaC)

· Networking and Security

· Compute, Storage, and Database Solutions:

· Monitoring, Logging, and Alerting:

· Experience on GCC (AWS) – Familiar with Govtech IM8 guidelines/policies

Required experience of GCC and IM8 policies.

· Experience with advanced AWS tools and frameworks like Kinesis, Chime, OpenSearch, and Generative AI (GenAI) using Retrieval-Augmented Generation (RAG) is highly valued.

EA License No: 11C4879 / Registration ID : R1218583

Apar Technologies Pte Ltd, Singapore

Roles & Responsibilities

• Review requirements, design, develop, implement and maintain software applications for data acquisition and control systems with OT (including but not limited to OPC UA, BACnet, Modbus) and IT (including but not limited to MQTT, REST).
• Collaborate closely with system engineers and system integrators to ensure seamless integration of software components with existing systems.
• Perform unit testing, integration testing, and system testing to ensure software quality and reliability - benchmark and optimize performance as necessary.
• Create technical documentation, including software specifications, user manuals and test plans, while ensuring good documentation practices.
• Strong team player who is able to communicate well, and excited to lean new technologies in a fast pace environment.
• Stay updated on emerging technologies and industry trends in building automation and IoT.

Requirements

• Minimum Diploma/Degree in automation, information technology or equivalent.
• At least 1 year of working experience in building automation industry and relevant industry.
• Possesses strong knowledge on OPC UA, BACnet, Modbus.
• Possesses knowledge on SQLite, PostgreSQL, Python, Linux OS.
• Possesses knowledge on Containerization.
• Work individually or collaborate as a team.
• Require working onsite for project delivery.

Come help develop the future of software used in industrial automation. We are seeking individual with a real passion for learning that are curious and often challenge the status quo. Attitude, aptitude and integrity are central to all successful applicants. Together, we work to build our primary product, PCO.

PLC programmers are responsible for programming assembly lines, robotic devices, or other manufacturing processes using programmable logic controllers (PLC). This role is ideal for a detail-oriented, logical thinker who enjoys working with different machines in combination with computers. PLC programmers work full time but experience a moderate amount of travel and activity in the workplace, such as supervising the installation of their programs and machinery.

The daily responsibility involvement includes of the following;

• Design and perform detailed designing for machine electrical control systems;
• Write Programmable Logic Control (PLC) program for automatic machine control & processes.
• Develop process specific application function librabries.
• PLC application programming and build new function library.
• Ability to utilize, debug, design and install engineering software.
• To collaborate and work together with Design Team (comprising of both mechanical & electrical membes) for the design concept arising from new project proposal and confirmed projects;
• Diploma or Degree in Electrical Engineering OR its equivalents;
• Good knowledge of PLC and circuit design;
• Demonsrated ability to visualize projects, develop and produce design from concept through completion.
• Sound knowledge of process instrumentation, PLC programs such as Delta, Mitsubishi, Matsushita, Omron PLC, Direct Logic, Siemens.
• RS422, RS485, Modbus TCP and other industrial interface protocol.
• Knowledgeable of VB, VC, C# will be considered as an added advantage;

Plus;

• Programming experiece in C++, Python, SQL or similar language.
• Industrial electrical panel design.
• HMI/SCADA programming (Allen-Bradley, Ignition or similar).

Responsibiliites :

• Collaborate with the business development Team to develop and come up with detailed solar PV system designs that meet client requirements, local codes, and industry standards.
• Optimise system layout for maximum energy production and cost-effectiveness.
• Perform solar resource assessments to determine energy generation potential.
• Conduct shading analysis and assess site suitability for solar installations.
• Develop bill of materials (BOM) for projects.
• Use modelling software to predict system performance, energy output, and financial returns.
• Prepare and submit permit applications, ensuring compliance with local regulations and utility requirements.
• Coordinate with regulatory authorities to secure necessary approvals.
• Develop and implement quality control procedures for solar installations.
• Conduct inspections to ensure system integrity and safety standards.
• Provide technical guidance and support to installation teams during system setup.
• Troubleshoot and resolve technical issues as they arise.
• Create and maintain accurate and detailed project documentation, including schematics, drawings, and technical manuals.
• Monitor and ensure systems are operating optimally before handing over to clients.
• Promote and adhere to safety protocols and ensure that all installations meet safety requirements.
• Prepare weekly and monthly progress reports for every project to ensure that projects are within schedule.
• Provide technical support for sales, proposals, and during potential client meetings.
• Must be proficient in AutoCAD
• Solar experience is added advantage

Requirements :

• Diploma or Bachelor’s Degree in Engineering or relevant field
• Prefer two (2) years of relevant work experience
• Preferably with Energy Industry or Renewable Products background
• AutoCAD, PVSyst or Helioscope skills preferred
• Technical advisors, EPC contractors, BD related roles are welcome to apply

Corporate Technology is a global organization that collaborates with TE BUs on advanced technologies and the SG Corporate Technology team focuses on innovation solutions through partnerships and ecosystem.

We are seeking a team member with strong background in polymer engineering to join our team. This role is ideal for someone with expertise in engineering plastics and rubbers with interest to drive innovation and change through whitepaper/landscaping advisories, research projects, and tech scouting. The application fields will be both traditional areas of formulation and processing and metrology for connectors, cables and microfluidics, as well as emerging topics related to trends in smart materials, sustainability and AI.

Job Responsibilities:

• Engage TE BUs to identify and address technical needs related to engineering plastics and rubbers.
• Develop a deep understanding of engineering plastics and rubbers through comprehensive reviews, experimental trials, and tech scouting.
• Lead partnership research activities related to characterization, formulation, and processing of plastics and rubbers, for connectors, sealants, cables and microfluidics (as needed).
• Author whitepapers, technology landscaping reports, and advisory documents to support TE’s strategic objectives and technology development. Launch proof-of-concept projects as appropriate.
• Manage projects from initial concept through execution, including scope definition, partner selection, and project management to achieve technical and business goals.
• Oversee internal project documentation and compliance matters, including contracts, budget tracking, and technical reporting.
• Represent SG team in various forums, including technical conferences (internal & external) and senior management presentations, to share knowledge and innovations in polymer engineering.
• Collaborate with other TE polymer centers of innovation to drive alignment of SG activities.

Job Requirements:

• Ph.D. or Master’s degree in Polymer Engineering, Material Science, or a related field.
• 5-8 years of experience in R&D or product development, with a focus on engineering plastics and rubbers. Demonstrated expertise in material characterization, formulation, and processing.
• Proven experience in leading technical projects involving advanced polymers and rubbers in an industrial or corporate setting.
• Familiarity with tools and methodologies related to polymer engineering, such as material characterization techniques, formulation strategies, and processing technologies.
• Experience scouting technology state-of-art through literature, patent landscapes, or conferences
• Knowledge of engineering PjM (scope, deliverables mgmt.) and technical tools (e.g. moldflow, FA, RCA)
• Effective in verbal/written forms communication.
• Experience or certification with contract law will be advantageous.

Desirable Qualities:

• Goal-driven and comfortable working in technical management role.
• Technically curious with a broad interest in new and emerging technologies in the field of polymer engineering.
• Business-oriented, with the ability to interact effectively with other experts and management.
• Skilled at managing multiple technical projects simultaneously and reporting on their progress

Summary Benefits :

• Basic up $2600 - $3500
• East / North
• Engineering - Electrical

Responsibilities :

• Assist in project coordination, equipment installation arrangement, testing and commissioning
• Assist manager in provide solution to the tasks requested by clients on problem of all Electrical
• Liaise with clients, vendors, contractors and sub-contractors
• Build positive relationship with customers and clients
• Work with internal department for process of project claim, Variable order(if any) etc
• In charge of project hand over to client or maintenance department

Requirements :

• Diploma/Degree in Electrical or relevant engineering is advantage
• Entry Level is welcomed. Training is provided
• Preferably to have Class 3 Driving License
• Candidate with relevant experience will have added advantages

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)