Total 9,117 production engineer job vacancies in Engineering category in Singapore

The New Product Introduction (NPI) process engineer will provide Dermcut Medical Pte Ltd with technical support and operating knowledge for our medical device operation. This role will conduct critical engineering functions such as product validation, troubleshooting, identifying and implementing process improvements.

The engineer will work closely with project manager and is in charge of taking the prototype from pilot scale into full scale manufacturing in support of commercial efforts. This position will focus on developing various processes and implementing those to support mass production.

Primary Responsibilities

• Establish processes based on product specifications.
• Develop control plans, gage repeatability & reproducibility, test method verification & validation, and pFMEA.
• Identify areas of process improvement to reduce and minimize process related nonconformance incidents and to maximize efficiency of the process.
• Co-ordinate the generation of dossier including but not limited to design files, technical files and project files to include design outputs, shelf-life studies, biocompatibility, sterilisation, risk analysis, validation master plans, IQ's, OQ's, PQ's and test regimes.
• Responsible for screening and optimization of process parameters to achieve robust and stable processes and maximize yields, efficiencies and process capabilities.
• Perform other related duties and responsibilities as assigned.

Education / Experience Requirements

• Bachelor’s degree in process engineering or similar qualification.
• A minimum of 2 years’ experience in the medical device industry.
• A strong understanding of validation strategy (IQ/OQ/PQ), support protocols and reports.
• Experience in root cause analysis of technical discrepancies/abnormalities.
• Familiar with FDA documentation requirements, ISO 13485 quality management system, lean manufacturing, and good manufacturing practice.
• Experience with SolidWorks and Microsoft Project preferred.

Job Description & Requirements

Responsibilities

• Coordination of Mechanical,Electrical, P&S design and installation.
• Ensure all works are carry out accordingly to drawings, specification, and compliance to authorities’ requirements.
• Site coordination and manage M&E personnel on work progress, drawings,material, samples, method statement submission and approval, to ensure quality and timely completion.
• Manage and Coordinate SWC.
• Preparation of CSD & SEM or CCSM drawings.
• Monitoring of construction installation, field coordination and provide necessary problem solving.
• Carry out testing requirement, inspection with consultants.
• Conduct T&C and Handover to Client.
• Proper documentation of all test report, equipment records and As-built drawings.
• Supervision of workers and sub-contractor to ensure safety and compliance of work on site.
• Adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship.
• Other duties as assigned.

Requirements

• Minimum 5 years of engineering experience with Recognized Degree in relevant field.
• Minimum 3 years of supervision experience of E&M work in construction site for projects of similar scale and complexity.

RED an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients.

We now seek an experienced Principal Electrical Engineer to be based in our Singapore office to inspire others. You will have the ability to run small and large sized projects, undertake a client facing role in the development, design, and co-ordination of engineering projects You will have experience in the delivery of data centres along with other sector experience including commercial, hotel, retail, and hotel design desirable.

Your excellent communication and interpersonal skills, both with colleagues and clients, and experience working on innovative projects with leading client organisations, and contractors will equip you to take a future pro-active role in forging client relationships of our sector portfolio.

You will possess good commercial awareness, in addition to having robust technical knowledge relevant to building services design, and capable of incorporating those technologies into the hotel / hospitality and leisure sector. The position will ideally suit someone who is currently working in building service consultancy and is prepared to work ‘hands on’.

Job Description

Responsible for the running of large projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Electrical installations, systems, equipment, facilities etc. (Several building types)

• Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes
• Surveys, tests, carries out dilapidation reports on existing electrical/mechanical installations
• Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements
• Day to day decision making on project progress and direct liaison with and provides advice to client
• Represents Company at technical meetings with customers, professional teams and contractors teams
• Ensures engineering calculations and drawings meet required robust industry and legal standards
• Leads on the coordination of engineering services

Takes a holistic view in the selection and application of engineering concepts and solutions

Qualifications / Experiences

• BSc/BEng or degree in appropriate engineering discipline or have sufficient equivalent experience
• MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent
• Working towards Chartered Eng status
• Significant experience of specification design for several building types
• Sound knowledge of key Health and Safety issues and legislatio
• Knowledge of MS Office applications word, excel etc
• Ability to use IT based calculation and spreadsheet softwar
• Good understanding of BS standards/ UK Regulations/Codes
• Ability to prioritise own workload
• Ability to work to deadlines
• Managerial skills
• Presentation skills

If you think you have what it takes to join an award winning team and help RED continue its exciting journey, we want to hear from you!

Responsibilities:

• Liaise with appointed engineering firm and internal stakeholders
• Responsible for end-to-end project delivery, execution and documentation
• Participate in cross functional internal/external discussions for project execution
• Responsible for timely delivery and completion of project milestones and updates
• Ensure project completion within allocated budget expenditure

About You:

• Minimum 4 years of experience in the pharmaceutical industry
• Clean Utilities experience is preferred

Duration : 12 months. Option to extend/convert subject to performance review.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

What you will do

• Build the web frontend product features. Write product features or system development code
• Apply technical knowledge and problem solving skills to build innovative solutions for complex workflows
• Strive for constant improvement in terms of code quality, maintainability, performance
• Participate in, or lead design reviews with peers and stakeholders to decide amongst available technologies
• Review code developed by other developers and provide feedback to ensure best practices (e.g., style guidelines, checking code in, accuracy, testability, and efficiency)
• Ensure engineering best practices, including writing comprehensive test cases are followed
• Contribute to existing documentation or educational content and adapt content based on product/program updates and user feedback
• Triage product or system issues and debug/track/resolve them by analyzing the sources of issues and the impact on hardware, network, or service operations and quality. Support engineering operations, including being on-call for production support when necessary
• Collaborate effectively with the team, while being a good communicator (both verbal and written)
• Document and share important aspects of all engineering decisions being made

What you’ll need

• Strong engineering skills and foundations, including problem solving, coding and debugging
• Expertise in core Javascript with at least 7 years of experience developing with it
• Proficient in Typescript, HTML5, and CSS3 usage in building large-scale applications
• Experience in browser (Google Chrome, Mozilla Firefox) plugin development is a plus
• Passion for building rich and innovative user experience
• Strong communication skills. Proactive in driving various initiatives and processes for the team as well as communicating with various stakeholders
• Bachelor's degree in Computer Science or related fields would be nice to have

6 months contract (extendable based on project requirements)

Responsibilities:

- Primarily responsible as main coordinator and lead engineer for the refresh/ upgrade of Windows 10/ 11 desktop and laptops for the client.

- Working closely with Technical Project Manager and Leader to ensure all workstations are refreshed within project scope timeline with a strong emphasis on customer service experience for a smooth transition.

- Provisioning of desktops and laptops, data migration and re-installation of software

- Plan and liaise with users to schedule tech refresh appointment with users

- Work closely with IT Asset Management for the delivery and write-off of refresh assets, update of the hardware inventory

- Coordination with Application Support for re-installation of in-house application

- Assist users to perform data migration, brief user of the new asset issuance and signoff

- Troubleshoot software and hardware issue related to refresh

- Collect old devices and send to centralized storing areas and process decommission

- Generate progress report of day-to-day tech refresh/ upgrade activity

Qualifications:

- Atleast 1-2 years experience in desktop support

- Strong knowledge in Microsoft Windows 10/11 provisioning

- Troubleshooting of software and hardware

- Time management skills

- Good customer care skills

- Previous tech refresh experience is a plus

Registration No. / Unique Entity Number: 199801439D

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg

Job Descriptions

• Thoroughly review and understand bidding employer’s requirement documents, project specifications, and process data.
• Translate employer requirements into effective contractor solutions that align with project goals.
• Propose T&I proposal and support project execution.
• Assign work to In-House design team. Timely provide technical proposal or solution to project operation team.
• Liaise and communicate with project stakeholder for technical clarification and conclusion.
• Technical support for SFE Vessel operation and maintenance.
• Support engineering budget (estimation) and cost control.

Requirements

• Bachelor Degree in Civil Engineering / Naval Architect
• Min 10 years of related working experiences in offshore structure design and installation such as offshore platform, jacket and foundation.
• Preferably have experience with Wind Farm T&I.
• Familiar with offshore industrial standards and codes.
• Familiar with engineering design tools and software.
• Able to work in a team.

Job Description:

•  Configure, develop and maintain vulnerability tools and platform
•  Configure and test network security appliances (eg. Firewall, Link Encryptors)
•  Perform backup and upgrade of network appliance configuration and firmware
•  Develop network security diagram
•  Troubleshoot and debug issues that arise
•  Develop and maintain technical and configuration documentation
•  Perform standby duties as required

Education / Experience:

o Degree in IT / Computer Science / Engineering, or equivalent

o At least 2- 5 years of experience in IT implementation and maintenance support

Skill sets:

 Technically inclined and hands on

 Keen to pick up new technology and skillsets

 Experience in Vulnerability Assessment tools (eg. Nesses, NVM)

 Detailed configuring one or more brands of network security equipment

 Good team player who can also carry out assignments independently

 CCNA, CCNP preferred

Responsibilities:

• Manage VMware and Vcenter environments
• Configure and manage Meraki switches/access points and Fortigate firewalls
• Maintain Windows servers and work with MS-SQL and IIS servers to support vendor development projects and generate queries for reports
• Maintain Windows workstations and laptops
• Oversee backup and recovery processes, and implement disaster recovery plans
• Collaborate with HQ to ensure compliance with IT standards, including updating ISO documentation as needed

Requirements:

• Must have at least a Diploma or Degree in Computer Science, Information Technology, or a related field
• 2 years of experience in IT infrastructure management
• Proficient in managing Windows servers and workstations
• Experience with VMware and Vcenter
• Familiarity with Meraki and Fortigate products
• Skilled in SQL and IIS server management
• Experience in installing and configuring Office 365

To apply, please visit www.gmprecruit.com and search for Job Reference: 24920

To learn more about this opportunity, please contact Yingying at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lai Yingying | Registration No: R1110239

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Period: 30-36 months
• Start from November / December 2024

Requirements:

• Min Diploma in Civil Engineering or equivalent
• At least 4 years of relevant experience in supervision of residential buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

Responsible for maintenance/trouble shooting of plant equipment (mechanical and electrical systems) at water treatment and waste water treatent plants.

Prepare technical reports and submission to the clients.

Purchasing of materials as required.

Good technical knowledge and codes of safe work practice.

Maintain good housekeeping.

Minimum Diploma qualification.

Must possess WSQ certificates (BCSS, Confned Space Supervisor/Assessor, WAH)

Driving Licence Class 3 preferred.

5 years relevant working experience at Public Utilities Board (PUB) waterworks and water reclamation plants.

Element has an opportunity for an Engineer to join our rapidly expanding team in Singapore

In this role , you will perform variety of routine and non-routine testing assignments within civil testing operations and esure timely and accurate test results under minimal direct supervision

This role is based in Sungei Kadut Loop , Singapore.

Job Duties:

• Be accountable for accurate and timely release of testing data to customers and oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide input and support on business development opportunities with new or existing customers
• Provide formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders
• Assist in the professional development of novice technicians and engineers within the local laboratory and utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelors of Science degree in a science or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

• Assist, manage and review Project Management Plan to monitor all aspects of project including progress, cost management (i.e. Claims & VO verification and procurement negotiation), quality, safety, human resource, environmental and etc.
• Assist Project Director and Project Manager in conceptualizing and executing project schedule, cost, procurement and quality management of project.
• Assist, manage and review project management tool and produce reports to monitor progress of project and identify project critical path.
• Assist in tracking of Architectural Instructions issued and counter propose if necessary.
• Tracks, Interpret and Solve any Drawings discrepancies (RFI) between all Trades.
• Management of project staffs and assists them in fulfilling their potential and beyond.
• Monitoring and ensuring sub-contractors of different trades are able to proceed with their works on site.
• Checking and monitoring wastage of materials on site to ensure no unnecessary wastage of materials.
• Assist PM to chair various committee meetings such as weekly sub-contractors’ coordination meeting, safety committee meeting and etc.
• Leads Weekly Technical Meetings with consultants and client representatives to resolve issues between Architectural, Structural and M&E trades
• Together with PM prepares and presents Biweekly Project Schedule Meeting to Client representatives, consultants and Client QS
• Independently ownership, coordinate & monitor of all ERSS works and relating submissions and requirements between designer and on-site implementation up to dismantling.
• To liaise and coordinate with professional designer for all temporary shoring works and permanent structure works.
• Liaise with clients, consultants, government authorities and sub-contractors to ensure work progression is on schedule and project milestones / deliverables completed according to shareholders’ expectation.
• Hands-on site day-to-day coordination on architectural, structural, M&E, interior design and fit out works, inclusive resolving all RFI
• Acts as liaison between surrounding neighbourhoods (all nearby properties / owners)
• Preparation of official letters to sub-contractors, consultants and client.
• Carry-out structural inspection with RTO/RE
• Other ad-hoc activities as when required by the company.

• Responsible for all major mechanical and electrical and instrumentation equipment
• Lead a team of technical executives/technicians for troubleshooting works
• Manage the purchase of major supply and repair items alongside with supervision and execution of preventive and condition monitoring of major electrical equipment
• Handle hands-on preventive maintenance and breakdown maintenance work
• Coordination with clients and subcontractors to meet the site/project requirements
• Carry out rectification of faults within a specified time
• In-charge of troubleshooting of M&E system
• Responsible for planning, execution and supervision of all facilities management and operational activities
• Responsible for project cost control and service standards
• Any other ad hoc duties assigned

Job Requirements

• Degree or Diploma in Engineering.
• 3-5 years of relevant working experience
• Technical knowledge of M&E systems(including, but not limited to, fire protection systems, AV systems and ACMV systems) is an added advantage
• Able to perform shift work if required
• Preventive Maintenance Troubleshooting

Technical Leadership:

• Provide advanced technical support and troubleshooting expertise for complex hardware, software, and network issues.
• Design, implement, and maintain desktop infrastructure solutions including operating systems, applications, and configurations.
• Lead desktop-related projects such as system upgrades, migrations, and deployments.

System Architecture and Design:

• Design and implement desktop management solutions such as imaging, deployment tools, and software packaging frameworks.
• Develop and maintain desktop security policies, configurations, and access controls.
• Evaluate new technologies and solutions to enhance desktop performance, security, and user productivity.

Team Collaboration and Mentoring:

• Collaborate with IT teams including network, security, and systems administrators to ensure integrated and optimized desktop services.
• Mentor junior desktop engineers, providing guidance, training, and knowledge sharing opportunities.
• Participate in hiring processes and performance evaluations for desktop engineering team members.

Documentation and Compliance:

• Maintain comprehensive documentation of desktop configurations, procedures, and best practices.
• Ensure compliance with regulatory requirements, security standards, and licensing agreements related to desktop environments.
• Conduct audits and assessments to identify and mitigate risks related to desktop systems and data.

Continuous Improvement and Innovation:

• Identify opportunities for automation, process improvements, and cost optimizations in desktop management and support.
• Stay current with industry trends, emerging technologies, and best practices to recommend and implement innovative solutions.
• Collaborate with vendors and third-party providers to evaluate and implement new technologies or services.

Essential

• Minimum 3 years of relevant working experience.
• Extensive experience in desktop engineering, system administration, or related IT roles.
• Proficiency in desktop operating systems (Windows, macOS) and enterprise management tools (SCCM, Intune, Jamf, etc.).
• Strong knowledge of virtualization technologies (VMware, Hyper-V) and desktop deployment methodologies (MDT, WDS, etc.).
• Experience with scripting languages (PowerShell, Bash, Python) for automation and task scripting.

Desired:

• Excellent problem-solving skills, analytical thinking, and attention to detail.
• Leadership abilities including project management, team collaboration, and mentoring
• Diploma / Bachelor’s degree in computer science, Information Technology, or related field (or equivalent work experience).
• Relevant certifications such as Microsoft Certified: Modern Desktop Administrator Associate, VMware Certified Professional (VCP), or similar are highly desirable.

Interested applicants please send your resume to [email protected]

Venessa Goh Wee Ni

R24124686

Recruit Express Pte Ltd

EA License No: 99C4599

RCB No.: 199601303W

We regret that only shortlisted candidates will be contacted.

Location: Woodlands

Brief Summary: To support, develop and implement improvements to product quality and systems.

• Create acceptance test plan based on customer drawing

• Support internal instrument calibration activities

• Support master equipment calibration by sourcing external parties

• Support quality First article inspection (FAI) activities

• Provide production metrology technical support on Zygo New View Measurement

Reuirements :

Min NITEC in any Engineering discpline and above

Interested applicants may email resume to [email protected]

Cheryl Lee Shi Le (CEI Registration No: R1434624)

Recruit Express Pte Ltd (EA: 99C4599)

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for FP & Plumbing system installation and troubleshooting on site
• Prepare material requisition for all FP & Plumbing equipment and materials
• Prepare work programme for FP & Plumbing works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of FP & Plumbing system, including detailed design, calculation, shop drawings, pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with FP & Plumbing suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for FP & Plumbing system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all FP & Plumbing equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling FP & Plumbing works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in FP & Plumbing design calculations and Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Highlights

• 5 days + AWS + VB
• Electrical Design Work
• AUTO-CAD
• Computer literate and systems savvy

Job Description

• To provide technical support to Project and Installation to verify report and coordinate over job site issues and provide technical solutions related to electrical design.
• To involve in design interfacing and parts provision.
• To participate in resolution of design problems related to Error/Trouble investigation, formulate corrective and preventive measures.
• To provide engineering support to Marketing and Sales staff for new products.

Requirements

• Diploma/ Degree in Electrical/ Electronics Engineering or related discipline
• Prior experience/ knowledge in Electrical Design Work.
• Proficiency in AUTO-CAD.
• Computer literate and systems savvy.

HOW TO APPLY:

Interested applicants, please email to “[email protected]”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Pierre Chung Yih Shern
EA Personnel Reg No: R22111092

As the Global FE Layout Senior Engineer at Micron Technology, Inc., you will be part of Micron’s Global Factory Automation team which is responsible for designing Micron’s next generation manufacturing facilities.

Your objective is to develop full factory tool layout models that will be the basis of design for industry leading manufacturing facilities across the globe. You will be part of a diverse group of highly skilled layout professionals who are responsible for tool layout design, construction design support, and the layout business process. In addition, you will partner with Micron’s Technology Development team to develop innovative semiconductor production tools that deliver word-class, trail blazing, capabilities that solidify Micron’s manufacturing leadership.

Primary Responsibilities

• Generate Layout models for Micron’s U.S. manufacturing sites that meet or exceed established critical metric targets.
• Establish Layout requirements during Micron’s quarterly business plan reviews.
• Collect and analyze Layout date for Micron’s manufacturing sites to find opportunities for improvement, recommend design changes, and identify new processes that will improve Micron’s overall manufacturing efficiency.
• Maintain a Layout data repository (SharePoint) that can be demonstrated for historical validation as well as information sharing across multiple departments.
• Collaborate with the Technology Development team to influence the design of future process equipment that enable improved space efficiency.
• Actively engage and contribute to Micron’s environmental sustainability projects.
• Present your layout designs and recommendations to Micron’s Senior Leaders and Executive team.

Requirements

• Bachelor’s Degree in related field or equivalent professional experience (MS Degree Preferred)
• Five years’ specific and confirmed experience
• Expert proficiency using AutoCad, BIM, Revit, Factory Design Utility and other similar Layout software applications.
• Direct experience with process equipment and facilities design.
• Fluent in English both verbal and written.

Working Location : Micron Fab10

Responsibilities

• Design and project management of mechanical/electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc.
• Engineer shall be expected to carry out design work, attendance at consultants’ meetings and management of the relevant M&E aspects of the construction activities.

Requirements

• Bachelor degree holder in electrical engineering
• 2-6 years of experience under consultancy culture
• Design and implementation, able to attend meetings independently
• Able to multi-task and work in a fast-paced environment
• Possess initiative, drive, and ability to work independently
• Good interpersonal/communicational skills
• Experience as a consulting in the construction industry is a pre-requisite
• Working schedule: 4.5 days
• Mondays to Thursdays (8am-6pm/9am-7pm), Fridays (8am-12pm/9am-1pm)
• Office location: Central

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Mechanical) Oil & Gas for the next phase of their business. They are located in West.

Duties:

• Lead Mechanical and HVAC disciplines for CAPEX projects, overseeing FEED consultants, EPC contractors, and vendors.
• Develop and issue design bases, datasheets, project specifications, and scopes of work for feasibility studies, FEED, and EPC projects.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Validate and approve Mechanical and HVAC deliverables in CAPEX projects.
• Support regulatory approval processes and coordinate with consultants and contractors.
• Collaborate with project management, engineering disciplines, and operations teams.
• Witness factory acceptance tests (FAT) and ensure accurate engineering databases.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 12 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)