Job Description & Requirements

NACT Engineering provides drones accessories for all sizes and use-cases. Our intimate knowledge of robotics systems places us at the forefront of a burgeoning mechanical revolution. As a company at the cutting edge of engineering and robotics, we are looking for a suitable candidate that will push NACT forward as a bespoke drone solutions provider for our clients in the APAC region.

Highlights of working at NACT

• Close proximity to many amenties along alexander road
• Competitive compensation package remunerated based on skill and experience.
• High level of autonomy on the job with training opportunities provided for upskilling and learning
• Open culture and collaborative environment
• High growth industry

Job description

• Continuously update the IOT standalone GUI, and write manual documentation for the team to adopt.
• Work with electronics and full stack engineer to create a bidirectional data transfer, to create web based GUI to display robot product status
• Conduct troubleshooting of IOT controlled robotics system to verify the cause of failures, and assist in arriving at the corresponding solution.
• Ensure compliance with company programs procedures and applicable quality system regulations and standards.

Position Responsibilities

• Work on Single Board Computer to implement sensors and calculations to enable robotic functions
• Independently perform some level of failure analysis.
• Supports equipment development efforts for new products, and process improvements. These efforts may be the internal development of process equipment or coordination with an external equipment integration company.
• Supports processes. This support might include daily support of production operations as well as leading reliability and yield improvement activities for the IOT product.
• May be expected to work on complex problems where analysis of situations or data requires an evaluation of many tangible and intangible factors. Individual will be required at times to make complex technical recommendations on design quality and reliability.
• Writes Process Specifications and Manuals when applicable.
• Supports Return Merchandise Authorization process by providing root cause analysis report.
• Collaborates with Technical Experts from other software/hardware partners to implement new Product/ Process activities across the facilities following Technology Roadmaps and Design Engineering activities.
• Performs other position related duties as assigned.

Quality Responsibilities

• Reports any observed or informed process and/or product non-conformities.
• Finds resolution of Quality Situations at the area of responsibility.
• Complies with all the requirements in the operational procedures at the area of responsibility in order to meet the requirements of all applicable Quality System regulations.

Company background:

Focus Computer Pte Ltd has been operating since 1989, and is an established leader in the IT hardware and software fulfilment space in Singapore. We have provided a stable environment for our employees since our inception and we believe in taking care of our employees through thick and thin. We have established Focus Digitech Pte Ltd in order to meet the growing demands for digital transformation by our customers, and we have an opportunity to hire a Senior IT Infrastructure Engineer to join our growing team. Your entry point into the company does not limit the potential you have to rise within the company to other roles as your aspirations and attitudes may propel you towards. We believe that paper qualifications can only tell us so much, and we believe in hiring people with the right skills and not just certifications (although we will accord due credit if you have them). So, come discover your full potential with us as we take Focus Digitech to the next level of leadership in digital technologies!

The Role:

We are seeking a highly motivated and experienced Senior IT Infrastructure Engineer to join our team. As a Senior IT Infrastructure Engineer, you will be responsible for managing, maintaining and optimizing our IT infrastructure at our clients. This position requires a strong technical background in various areas including server and storage systems, virtualization, networking, security, and monitoring.

Responsibilities:

Server and Infrastructure Management:

• Design, configure, deploy, and maintain Wintel and Linux server environments, including Windows Server (2019, 2022) and Linux distributions (RHEL, SUSE).
• Conduct server hardening for both Windows and Linux systems.
• Lead and collaborate with cross-functional teams to implement and oversee server hardware, virtualization technologies, and storage solutions to ensure availability and scalability.

Virtualization:

• Lead virtualization initiatives using industry-standard platforms such as VMware vSphere, Hyper-V, or KVM.
• Optimize virtualization environments for efficiency, performance, and resource utilization.

Storage (SAN / NAS):

• Design and manage Storage Area Networks (SAN/NAS), ensuring data availability, integrity, and optimal performance.
• Implement and administer storage solutions, including storage provisioning, zoning, and troubleshooting.

Security:

• Implement security best practices for infrastructure components and virtualized environments.
• Ensure compliance with industry standards and regulations related to infrastructure and data storage.
• Implement and administer key management and encryption.

Active Directory:

• Implement and administer Active Directory, including user accounts, group policies, security settings, and domain controllers.
• Implement and administer AD Public Key Infrastructure and Network Policy Server RADIUS services.

Management Applications:

• Implement and administer monitoring solutions such as eG Innovations, PRTG, Splunk, or Kiwi Syslog server.
• Implement and administer backup solutions like Veeam or Acronis.

System Maintenance and Monitoring:

• Develop and maintain scripts and automation tools to optimize IT infrastructure.
• Monitor system performance, troubleshoot, and resolve issues related to the IT infrastructure.
• Implement advanced system monitoring solutions to proactively identify and resolve performance and security issues.
• Develop and maintain comprehensive backup and recovery strategies, including disaster recovery planning.

Troubleshooting and Collaboration:

• Investigate and resolve complex technical issues related to Windows Server systems, collaborating with teams and vendors.
• Collaborate with network engineers, system administrators, to support business operations.

Capacity Planning and Governance:

• Conduct meticulous capacity planning to align Windows Server resources with current and future needs.
• Maintain SLA standards, act as an escalation point for incidents, and ensure user satisfaction.

Vendor Coordination and Documentation:

• Coordinate with third-party vendors, IT providers, and external support for effective service delivery.
• Develop and update comprehensive operations documentation and procedural guidelines.

Requirements:

• Bachelor's degree in Computer Science, Information Systems, Information Technology, or a related field.
• Minimum of 5 years of experience in IT infrastructure engineering with a focus on Windows Server administration.
• Experience with Wintel servers (Dell), VMware, Microsoft server products, Symantec
• Proven experience in designing on-prem data centre architectures.
• Proficiency in configuring, managing, and troubleshooting Windows Server environments.
• In-depth knowledge of Active Directory, Group Policies, and security best practices.
• Familiarity with virtualization technologies such as VMware or Hyper-V.
• Experience with scripting and automation tools.
• Strong troubleshooting and problem-solving skills.
• Excellent communication and teamwork skills.
• Ability to work independently and manage multiple projects.
• Offer is subject to Singapore Government G50 clearance.
• Relevant certifications (e.g., MCSA, MCSE, VCP) are a plus.

If you meet the qualifications above and are passionate about working with cutting-edge technology, we encourage you to apply. We offer competitive salary packages and excellent benefits.

Qualifications:

- 3-5 years working experience in C&S Engineering Consultancy Firm.

- Degree is recognized by Professional Engineers Board (PEB), Singapore.

- Preferably, has passed FEE, examination prescribed by PEB.

- Conversant with latest design codes and authority requirements.

- Competency in design software such as ETABS, SAFE, SAP2000, GSA, IDEA StatiCa, Tekla etc.

- Able to work independently to support the QP and directors.

- A team player and to carry out tasks/duties in a positive and dignified manner

Responsibilities:

- Responsible for the execution of civil and structural design involving the preparation of calculations, drawings and detailing.

- Assist in producing tender specifications and design requirements for calling of tender contracts.

- Attend project/technical meetings with authorities, developers and contractors.

- Involve in project planning, implementation and close monitoring of projects.

- Project coordination including submission to local authorities and liaison during the construction stage.

- Liaise with clients, consultants and authorities on technical matters.

Assist the Team Directors in the performance of their duties

· Ensure quality and accuracy of designs

· Offer suggestions to improve the designs

· Produce sketch drawings

· Carry out design calculations

· Check design calculations

· Ensure compliance with Project Design Criteria/Client Brief/ Approved Concept

· Ensure compliance with relevant design standards and office standards

· Check documentation complies with design

· Attend and participate in design meetings

· Ensure compliance with ISO Quality Procedure Manual

REQUIREMENTS

• Recognised Bachelor’s degree or equivalent in Structural Engineering, as a minimum.
• 1-7 years of design experience in a consulting Environment.
• Must have experience in HDB.
• Must have design experience in high rise residential, commercial or mixed development projects.
• Fully familiar and hands-on knowledge of the latest design software.

ADDITIONAL REQUIREMENTS:

• Good interpersonal and communication skills
• Must be fully familiar with European code
• Hands-on experience with the analysis and design of large building projects in structural steel, R.C. and post tensioned concrete

DUTIES

· Plan and manage manufacturing processes from raw material receipt to finished

· part shipment.

· Create or revise work instructions and develop new processes according to

· Engineering drawings and standards.

· Design Jig & Fixture to support CNC section.

· Develop Advanced Product Quality Planning, carry out associate training and a

pre-production trial project.

· Assist Production in fulfilling technical and quality requirements.

· Manage technical changes to fulfill customer requirement.

· Providing assistance with the RFQ proposal process and development.

· Any other ad hoc duties as assigned.

REQUIREMENT

· Diploma/Degree in Mechanical / Precision Engineering or other relevant discipline.

· Minimum 3 years of experience as a process engineer in the Manufacturing

industry or equivalent.

· Experience with Master-CAM Programming are preferred.

· Experience of hands-on CNC Milling/Turning fabrication.

· Good problem-solving skills.

· Proficient in Microsoft Excel functions.

· Systematic and meticulous in approach.

· Good communication skills & acts as a team player in a small dynamic team.

Responsibilities

• Proficient in implementation, management and troubleshoot AWS Technologies, ECS, EKS.

• Proficient in Operating System such as AWS Linux, Red Hat Enterprise Linux.

• Maintain, Manage and Monitor Cloud Infrastructure

• Resolve IT infrastructure issues

• Proactive handling of project and supporting project implementation

• Create high-quality technical documentation

• Support out of hours work if schedule requires

• On-board new Cloud technologies, challenge existing implementation in a professional and constructive manner

• Engage in Cloud security activities

• Comply with ITSM/ITIL methodologies in day to day operations of IT Infrastructure

Requirements:

• Resourceful and self-driven individual with sense of urgency and commitment

• Strong analytical and troubleshooting skills

• Ability to work effectively in a fast paced implementation environment

• Strong analytical and troubleshooting skills.

• Ability to work effectively in a fast paced implementation environment

• At least 3 year(s) of working experience in AWS Cloud or in the related field is required for this position

• Knowledge of Cloud security tools like Checkpoint, Security Hub, GuardDuty, AWS Detective

• Candidate must possess at least a Bachelor's Degree, Professional Degree, Engineering (Computer) or equivalent.

Technical Skill

• Operating Systems: Red Hat, AWS Linux

• Build Tools/CI/Virtual/ : AWS DevOps, Jenkins

• Containers Environment: Docker, Kubernetes, ECS, EKS

• Cloud Technologies : Amazon Web Services

• Automation/Scripting Languages : Terraform, Ansible, Shell Scripting, Python

• Databases : MySQL

• Others: Ansible *

Professional Certification

Candidate preferred to have the following certification -

• AWS Certified Solutions Architect - Associate (SAA)

• Red Hat Certified Engineer or related Linux certifications

• Relevant Cloud Security certificate

About NACT Engineering

NACT Engineering provides tethered drone systems for drones of all sizes and use-cases. Our intimate knowledge of robotics systems places us at the forefront of a burgeoning mechanical revolution. As a company at the cutting edge of engineering and robotics, we are looking for a suitable candidate that will push NACT forward as a bespoke drone solutions provider for our clients in the APAC region.

Roles and Responsibilities

• Maintain and optimize mechanical performance through continuously improving existing product design.
• Monitor and report any problems or substandard mechanical quality observations to the management.
• Ensure all log books are maintained according to standard operating procedures.
• Liase with vendors for consistent improvement in production of quality parts
• Liase with engineering team for improvement in producibility of next generation product
• Consistently conduct product testing and performance testing and record the results.
• Perform final checks and adjustments for any defects to ensure high quality products
• Develop preventive maintenance procedures to avoid any breakdowns and failures.

Job Requirements

• Relevant qualifications in Electrical, Electronic and Robotics Engineering/ Mechanical Engineering or Aerospace Engineering
• Independent and initiated
• With a “can do” attitude and ability to innovate around challenges
• Willing to learn new industry techniques

Highlights of working at NACT

• 5 minutes distance to one-north MRT station with many F&B options.
• Competitive compensation package remunerated based on skill and experience.
• High level of autonomy on the job with training opportunities provided for upskilling and learning
• Open culture and collaborative environment

Job Description:

We are looking for a motivated Automation Engineer Trainee to join our team and work on Industrial Automation & Controls system projects. As a trainee engineer, you will gain hands-on experience in various disciplines including Electrical, Instrumentation, and IT-related engineering.

Key Responsibilities:

• Assist in the development, installation, and commissioning of automation systems.
• Collaborate with multidisciplinary teams on engineering projects.
• Support the implementation of control systems in process plants.
• Participate in troubleshooting and maintenance activities.
• Document project progress and engineering procedures.

Qualifications:

• Fresh Diploma or Engineering graduates in relevant fields (Electrical, Instrumentation, Control Systems, or IT).
• Strong engineering knowledge and a recognized qualification.
• Good communication and teamwork skills.
• Willingness to learn and adapt to new technologies.

What We Offer:

• Comprehensive training and mentorship.
• Exposure to real-world industrial projects.
• Opportunities for career growth within the organization.

Job Description:

We are seeking an experienced Engineer to join our Industrial Automation & Digitalization team. The ideal candidate will be responsible for the design and development of industrial automation control systems, ensuring high-quality project execution and client satisfaction.

Key Responsibilities

• Development and programming of PLC, SCADA, and HMI systems (preferably with Siemens, Rockwell, Wonderware/AVEVA).
• Experience in design and development of control panel and Electrical architectures.
• Conduct Hardware and Software Factory Acceptance Tests (FAT).
• Perform testing, commissioning, and Site Acceptance Tests (SAT) at client locations.
• Provide technical support to the Sales team during project bidding.
• Offer onsite and remote technical support and services.
• Ensure overall quality control of all project deliverables.
• Collaborate effectively with team members and clients.
• Travel within Singapore internationally including offshore Oil & Gas facility as needed for project implementation and meetings.

Requirements:

• 3-6 years of hands-on experience in industrial automation & digitalization.
• Proficient in various communication protocols used in the automation industry.
• Strong knowledge of automation technologies specific to Pharma, Oil & Gas industries is an advantage.
• Strong verbal and written communication skills.
• Team player with a flexible approach to work and problem-solving and engage with other project team members in Singapore and overseas.
• Diploma or Degree in Electrical, Electronic, Computer, Mechatronic Engineering, or equivalent.
• A willingness to learn and a growth mindset.

If you are passionate about industrial automation and meet the qualifications, we encourage you to apply and become a part of our dynamic team!

About i-Consult Tech Pte Ltd (I-Consult)

i-Consult Tech Pte Ltd (I-Consult) - a wholly owned subsidiary of the i-Consult Group HK Limited in Hong Kong -- is one of the leading IOT solution provider in Hong Kong, Macau & Singapore (Asia Pacific) region with the focus to help both Government and Enterprise sectors to select, architect and implement advanced & integrated IOT solutions to empower their business & operation.

i-Consult Group HK Limited is also a member of Cyber World Creations HK Ltd., who established since 2000, being a leading System Integrator providing industrial platform solutions and Design Manufacturing Services (DMS).

I-Consult provides leading edge one-stop-shop IOT solutions of modernized infrastructure, IT security, cloud platform, updated IOT devices and a broad portfolio of IT services that serve the needs of the sectors including education, hotel, residential & health care sectors.

We are committed to deliver top quality services by conforming to important ISO/IEC quality standards backed by our established best practices and effective service management systems and processes.

I-Consult offers an excellent value proposition with its expertise of experienced professionals, and offshore facility with state-of-the-art information technology infrastructure and competent associates at an extremely cost-effective price.

Part Time Systems Engineer

Responsibilities

We are seeking for a resourceful, experienced and committed individual to manage the following:

· Manage and track day to day progress of projects being assigned

· Perform project/application assessments and evaluation

· Assist test team in creating test plans and testing efforts

· Efficiently identifies and solves project/application issues

· Maintain application and project documentation

· Ensure sufficient, standard and reliable systems infrastructure

· Provide standby support for critical systems

· Provide daily IT technical support including system testing, system deployment and operational maintenance.

· Coordination, planning and execution of routine Maintenance job for contract customers.

· Assist with pre-sales and projects including coordinate, monitor and implement IT solutions for customers.

· Any other tasks and/or duties assigned by the supervisor or manager

· Ad hoc duties as assigned.

Requirements

· Possess at least a Diploma, Advanced/Higher/Graduate Diploma in EEE, Communications, Computer Science, IT, Mechatronics or equivalent.

· Min 2 years of project coordination experience

· Min 2 years of experience in coordinating and support IT business processes

· Knowledge in Java.Net and/or mobile development skills advantageous

· Basic knowledge MS-SQL Database administration including data backup, recovery, security and integrity.

· Familiar with Linux and Windows server environment.

· Experience/Knowledge on other database engines (ie. MySQL) will be advantageous

· Knowledge on Web or mobile application development and architecture will be advantageous.

· Strong interpersonal and communication skills

· Able to work independently and under pressure to meet system performance service levels

· Self-motivated with excellent customer service skill

· Able to multi task, work independently and prioritize workloads effectively

· Strong Interest in the field of IT, positive attitude and a willingness to learn

· Possess good analytical thinking and troubleshooting skill.

· Knowledge of RFID preferred.

· Good analytical and problem solving skills on technical level.

· Good teamwork and communication and planning skills

Interested applicants please email your detailed resume stating your working experience, earliest available date, current & expected salary and a recent CV / Resume to info@i-consulttech.com/[email protected]

About our client: Our client is a leading international chemical manufacturing company.

Work Location: Jurong Island (company transport provided)

About the role:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of:

(a) daily maintenance [preventive, corrective, & breakdown maintenance],

(b) transition maintenance,

(c) turnaround maintenance and

(d) upgrading and improvement related to maintenance

• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s
• HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability
• objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.

About you:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.
• An aptitude for and interest in chemical process
• Analytical skills
• Ability to work well under pressure
• Good communication skill and able to collaborate with different functions
• Problem-solving skills

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Engineer executes the activities within own area of responsibility, ensuring the compliance with the QA/QC and HSE

requirements. Tasks include:

A - Development Technology know how and Commercial support

B - Feasibility

C - Bidding phase/Commercial proposal development

▪ Prepare Telecommunication Systems quantities for cost and erection works estimates

▪ Support Discipline Lead to define man hours and cost estimates

D - Project Execution

▪ Review Client technical documentation and requirements

▪ Coordinate subcontracted engineering activities and control subcontracted engineering documents

▪ Define engineering design basis and guidelines

▪ Prepare the technical documentation for Telecommunication material and services requisitions and prepare, according to

internal procedures, the technical evaluations

▪ Provide technical support to Project Team

▪ Optimise Telecommunication Systems design ensuring minimal cost and complexity in compliance with the contractual and

safety requirements

▪ Prepare Telecommunication systems functional specifications

▪ Prepare Telecommunication equipment data sheets

▪ Validate Vendor Telecommunication BOQs

▪ Coordinate detail engineering activities and ensure proper installation drawings definition

▪ Participates to F.A.T. activities and Vendor workshop

E - Construction and start up

▪ Participate to Site Acceptance Test and functional checks

▪ Provide technical and engineering support to construction Team

▪ Perform site engineering activities during construction and commissioning phases.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Engineer executes the activities within the area of responsibility, ensuring the compliance with the QA/QC and HSE

requirements. Tasks include:

A-Development Technology know-how and Commercial support

▪ Provide technical support

B-Feasibility

▪ Provide technical support

C-Bidding phase/Commercial proposal development

▪ Analyse and understand Tender documentation

▪ Take part in electrical system design review

▪ Identify technical queries, deviations an d alternatives to be submitted

▪ Implement bidding methodologies, design criteria and guidelines

▪ Define and issue request for quotation for items not estimated in house

▪ Coordinate material quantities and weights (MTOs) estimation

▪ Prepare bill of quantities for erection works cost estimation

▪ Support Electrical Lead to define manhours estimation

D-Project Execution (Job progress and completion)

▪ Review Client technical documentation and requirements

▪ Take part in definition of electrical engineering requirements

▪ Prepare Project design criteria for electrical system

▪ Define the configuration of the electrical system and the single line diagram

▪ Perform electrical system calculation and studies (e.g. power demand, load flow, short circuit, transient stability, motor starting) to define the equipment rating

▪ Prepare relay and metering schemes, protective relays coordination study and setting tables

▪ Define the functional philosophies for the electrical system control (power management, synchronization, load shedding, reacceleration and restarting) and control system architecture

▪ Prepare technical documentation (e.g. specifications, data sheets) for electrical equipment and materials

▪ Check and review technical documentation according to Project and client procedures

▪ Prepare Purchase Requisitions and bids technical evaluation

▪ Perform check and review of Vendor technical documentation

▪ Provide technical support to Procurement in purchasing and to Post order in expediting and testing

▪ Develop electrical system plant design (e.g. cable routings, grounding) and substations arrangements

▪ Perform power cables sizing

▪ Define typical installation details, bulk materials selection and take off (MTOs)

▪ Define bill of quantities and prepare technical documentation for electrical system installation

▪ Define technical procedure for electrical system testing and energization E-Construction and start up

▪ Support Construction for electrical system installation works and bulk materials management

▪ Assist, when necessary, engineering adjustment and define modifications

▪ Revise as built the technical documentation

▪ Support Commissioning for electrical system testing and energization

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

A. Development of Technology Knowledge & Commercial Support
Provide technical assistance in their area of expertise.
B. Feasibility
Offer technical support for project feasibility studies.
C. Bidding Phase/Commercial Proposal Development
- Review technical documents related to tenders.
- Define activity and deliverable lists, and coordinate tasks according to the project schedule.
- Identify and address technical queries, deviations, and alternatives for submission.
- Apply bidding methodologies, design criteria, and guidelines.
- Assist the proposal team with RFQs for commercial purposes.
- Estimate material quantities and weights (MTOs).
- Prepare manhour, item, bulk, and material cost estimates.
- Engage with clients and attend clarification meetings.
D. Project Execution (Job Progress and Completion)
- Achieve assigned goals and meet project quality and contractual requirements.
- Collaborate with the Discipline Leader to define activity and deliverable lists, set schedules, and coordinate activities per contractual requirements.
- Develop design specifications for civil works, including concrete works, plant roads, underground networks, and piling.
- Prepare detailed BOQs for civil works and buildings and MTOs for steel structures.
- Create technical documentation for subcontracted engineering activities.
- Design systems for drainage, sewage, plumbing, and building interiors.
-Conduct studies for foundations and concrete structures.
- Perform quality checks on all discipline-related project documents, including vendor submissions.
- Track and report scope changes to the Discipline Leader, updating manhour and cost estimates.
- Provide technical support to procurement, construction, and other project functions.
- Assist the Discipline Leader/TM in interfacing with clients on technical matters.
- Develop technical documentation for civil material requisitions and support procurement with technical evaluations.
- Collaborate with the Discipline Leader on Technical Bid Evaluations.
Review and address Client's technical documentation and requirements.
- Maintain project technical files.
- Execute assigned engineering activities, including detailed design, verification, and studies.
- Supervise and approve engineering designs and construction drawings for civil items like foundations, structures, and buildings.
- Monitor and report trends in civil quantities compared to bid-phase estimates.
- Design functional layouts, architectural aspects (3D modeling), and interior finishes, including furniture.

E. Construction & Start-Up
Provide field engineering support on-site.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Job Description: We are looking for a Lead Engineer or Senior Engineer to oversee Industrial Automation and Digitalization projects across the Oil & Gas, Pharma, and Chemical industries. This role requires a strong background in Electrical, Instrumentation, and Automation disciplines, along with substantial hands-on experience in various automation technologies.

Key Responsibilities:

• Lead and manage medium to large-scale automation projects from concept to completion.
• Develop and implement automation solutions using PLC/DCS programming software (Siemens, Rockwell, ABB, Honeywell).
• Program and integrate SCADA/HMI applications (Wonderware/AVEVA, FactoryTalk, WinCC, Ignition).
• Utilize batch management solutions and historian software effectively.
• Collaborate with the project team to address technical challenges during installation and commissioning phases.
• Implement OPC interface software products as part of automation solutions.
• Design electrical control panel and MCC panel schematics.
• Provide technical leadership and guidance to project teams.
• Manage project planning, scheduling, and execution.
• Prepare design and development documentation related to projects.
• Conduct Hardware and Software Factory Acceptance Tests (FAT) with clients.
• Oversee field installation, commissioning, and Site Acceptance Tests (SAT).
• Work on-site at client premises as required for project execution

Profile Requirements:

• 6-10 years of relevant experience in industrial automation.
• Strong knowledge of automation technologies specific to Pharma, Oil & Gas industries is an advantage.
• Strong troubleshooting skills in automation and electrical systems, with a proven ability to resolve complex issues efficiently.
• Experience in diagnosing problems in PLC/DCS systems, SCADA/HMI applications, and electrical control circuits.
• Diploma or Degree in Engineering (Electrical, Instrumentation, Computer Science, Mechatronics).
• Collaborate with the project team to address technical challenges during installation and commissioning phases.
• Excellent verbal and written communication skills.
• Flexibility to travel locally and internationally including offshore Oil & Gas facility for project implementation and meetings.
• Be a leader and develop strong project execution team with distributed team in Singapore and overseas
• A willingness to learn and a growth mindset.

If you have a passion for automation and possess the qualifications we seek, we invite you to apply and join our dynamic team!

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Engineer is responsible for executing tasks within their area of responsibility while ensuring compliance with QA/QC and HSE requirements. Key responsibilities include:

A. Development of Technology Knowledge and Commercial Support
B. Feasibility
C. Bidding Phase / Commercial Proposal Development
- Select critical materials.
- Estimate project costs.

D. Project Execution
- Ensure the quality, adherence to budget, and timely delivery of piping material tasks.
- Review and analyze the client’s technical documentation and requirements.
- Design all piping components.
- Develop project piping material specifications and piping component data sheets.
- Perform pipe wall thickness calculations.
- Prepare technical specifications for the requisition of piping components.
- Conduct technical bid evaluations for piping component offers.
- Review and approve vendor documents.
- Maintain project technical files and update company standards.
- Perform inter-disciplinary checks on documents within the piping materials scope.
- Verify documents prepared by piping material engineers.
- Validate the issued MTO with the Lead Engineer.
- Establish and manage the Piping Material Management System (PMMS) database.
- Support the inspection department as needed.
- Draft mechanical valve specifications for motorized valve bodies.
- Notify the Project Piping and Layout Leader of potential technical, financial, or scheduling risks.
- Contribute to the REX (Return on Experience) report for piping materials after contract completion.
- Evaluate piping material costs.
E. Construction and Start-Up
- Provide technical support.
- Assist with engineering adjustments on-site, if required.
F. Home Office Activities (Master)
- Validate cost estimates.
- Coordinate projects by providing guidance to discipline leads and material engineers to harmonize designs and methodologies.
- Support projects and procurement by addressing both standard and non-standard issues.
- Propose modifications to departmental workflows and technical standards.
- Contribute to updates in company workflows and technical standardization processes.
- Collect project feedback for continuous improvement through lessons learned.
- Participate in vendor and outsourcing qualification processes.
- Contribute to procurement strategy development with the purchasing team.
- Identify and develop tools to streamline design activities.
-Plan, oversee, and manage outsourced engineering centers.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading global engineering and project management consultancy embarking on large-scale infrastructure and environmental projects.

*Please note that this role will be hired on a long-term contract to support our client's project.

*Work Location: West

*Salary range: $6,000 - $7,200

About the role:

· Lead the site supervision team on all the Civil and Structural and Building Construction works.

· Assist Chief Resident Engineer and Construction Manager on all Civil & Structural site inspection issues, contract related matters and support the identification of defects and supervise rectification works.

· Address and respond to all Contractor’s RFI’s and technical submittals. Other work scopes include but not limited to assess method statements/instrumentation reading, coordinate with other discipline engineers and liaise with design team/QP from HQ.

· Attend all site/project related meetings, discussions with clients and/or Contractors and to lead in technical and work progress discussions.

About you:

· Good graduate Degree in Civil & Structural Engineering, preferably recognised by the PE Board, Singapore.

· Minimum 10 years of construction experience in supervising civil and structural works in water/used water treatment works.

· Registered with IES as Resident Engineer (Civil).

· A person with good communication and leadership skills.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Engineer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE requirements.

Tasks include:

A - Development Technology know how and Commercial support

B - Feasibility

C - Bidding phase / Commercial proposal development

▪ Estimate quantity and cost for critical support

D - Project Execution

▪ Be responsible for the quality, respect of budget and respect of project schedule for piping flexibility analysi s tasks

▪ Review the Client technical documentation and requirements

▪ Be responsible for the design of all piping supports components

▪ Issue project piping flexibility (Stress analysis) specification and critical lines list

▪ Perform calculations of critical piping networks

▪ Issue loads to allow the design of pipe-rack and foundations

▪ Issue technical part of requisitions for all piping supports components required by flexibility analysis

▪ Issue technical bid evaluation for all piping supports components offers

▪ Issue technical part of requisitions for all piping supports components purchase orders

▪ Review and approve vendors documents

▪ Maintain project technical files and update Company standards

▪ Perform the inter-disciplines checking for the part of documents in accordance with the scope of piping flexibility section

▪ Check sub-contracted discipline engineering documents in accordance with the scope of piping flexibility section

▪ Check documents issued by piping flexibility engineers

▪ Check the isometrics for construction of critical lines

▪ Assist P and ID section preparation for flexibility inputs of line list

▪ Inform on a permanent basis the Project Piping and Layout leader of any foreseen tech nical or cost impact or delay risk

▪ Capitalize piping flexibility activities performed during the project E - Construction and start up

▪ Provide technical support

▪ Assist, when necessary, engineering adjustmenton site

F - Home ofice activities (Master)

▪ Projects coordination: provide input to Flexibility Engineer to harmonize design and methodologies

▪ Provide support to projects and procurements to solve non standards problems

▪ Define the modification of department work flow and dep technical standards

▪ Participate to the modification of company work flow and technical standardisation

▪ Collect project feed backs for continuous improvement implementation (Lesson Learned)

▪ Participate to vendor and outsourcing qualification

▪ Participate to project/company procurement strategy (Purchasing team)

▪ Develop and scout tools for simplified design activities

▪ Plan, control and manage outsourcing engineering center

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Job Description

· To be overall in charge, manage and control a team of resident technical offices or RTO in their daily C&S inspection and need to manage the approval form for inspection and overtime works and claims.

· To ensure that the Contractor co-ordinates the work of various contractors.

· To agree to detailed programmes of work-time chart and representation on site plans.

· To check that all necessary drawings and instructions have been given to contractors and authorization obtained, in accordance with the agreed programme.

· To check that materials are ordered in good time and permits obtained.

· Check that all constructions works are carried out in a safe manner, and that the site is kept secure.

· To watch for faulty workmanship and materials incorporated in the works and to issue instructions for rectification.

· To check line and level and layout of structure during erection and that intentions of “contract” drawings are adhered to.

· To check structural slab, beam and column sizes and reinforcements placed and that intent of design details are followed.

Job Requirements

· Recognized degree in Civil/Structural Engineering acceptable for registration with the PE Board, Singapore. . Registered PEs will be preferred.

· RE must have at least 15 years’ post-graduate experience in supervising building projects. Applicants with both design and supervision experience as Resident Engineer will be favourably considered.

· Fully conversant with Building contract Act and Regulations. Able to administer contracts professionally, maintain site records and contract documents systematically to meet reporting requirements under Building Control Act.

· Extensive experience in the supervision of deep basement construction, preferably with top-down construction, bored pile systems, secant bored pile wall, diaphragm wall, precast concrete and structural steel construction.

· Experience with projects located adjacent to existing MRT structures or sensitive structures such as underground water pipe, canals, etc will be advantageous.

· Able to start work by Feb/Mar 2025

· Work location: Bedok area

· Project type: institutional development

· Pls submit your full employment history, last drawn basic salary, expected basic salary and notice period.

Those who have applied previously need not apply.

Develop and deploy Large Language Models in network.

Responsibilities:

- Work with our community of UX designers, developers, DevSecOps engineers and data scientists to develop and deliver quality data products.
- Design, build and test agile and user-centric AI/ML products (e.g. web applications).
- Develop APIs to access and retrieve data from various sources.
- Adopt proven software engineering practices such as code reviews and test-driven

Requirements:

- Degree in Computer science / IT / Engineering or equivalent
- Highly motivated and self-driven to complete assignments with the limited resources and tight schedule
- Good understanding of Software Development Lifecycle and Agile methodologies
- Experience in coding in either Python, Node.JS, Java or Go
- Experience working with Linux, Windows operating systems and open-source software and communities
- Knowledge in containerization such as Docker, OpenShift and Kubernetes
- Knowledge in Web services, REST architecture and messaging protocols such as MQTT
- Develop and review test plan and conducting acceptance tests
- Good communication and documentation skills
- At least 2 years of working experience in software/firmware development
- Ability to learn new programming languages/frameworks and to work closely with different groups of users, external contractors and/or subject matter experts

About the role: Our client is a leading chemical manufacturing company that is expanding their existing operations in Singapore.

Work Location: Jurong Island (Company transport is provided to and from Jurong East MRT station).

About the role:

The Production Engineer (HSE) is responsible for overseeing daily operations and project safety, ensuring compliance with all safety regulations, and driving continuous safety improvements. This role involves managing risk assessments and ensuring occupational safety standards are met.

Responsibilities:

• Lead daily operations as an HSE Production Engineer, ensuring safety across both daily operations and construction projects at the site.
• Manage the HSE aspects of operations, including risk assessments, Hazop studies for new modifications, changes to operating procedures, and site construction activities.
• Review and identify high-risk activities in the process operations based on Hazop studies, and hold regular meetings with the production manager to develop plans for improving safety in these high-risk areas.
• Work closely with production and logistics teams to ensure safe work procedures are followed in the process operations.
• Review and prioritize safety observation feedback based on risk levels, following up through the MOC process. Ensure improvement actions are tracked with records and timelines.
• Collaborate with project engineers, production teams, and maintenance coordinators to ensure safety-related projects are executed and completed on time.
• Review emergency and disaster prevention procedures, ensuring they are up to date and aligned with current operations.
• Lead and drive any additional HSE improvement projects or activities.
• Perform any other tasks or duties as assigned by superiors.

About you:

• Experience working in the chemical industry
• In-depth understanding of safety legislation and regulations within the chemical sector
• Diploma or degree in Engineering, Health, Safety, or Environmental studies
• Proficient in Microsoft Office applications
• Strong written and verbal communication skills
• Excellent organizational abilities
• Strong analytical skills with the capacity for critical thinking

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is in the Marine Offshore industry.

About the role: This position requires travel between Singapore and Taiwan for project needs.

The Technical Solution Specialist will play a crucial role within the commercial/business development team. This position is responsible for developing technical solutions for bidding projects, creating technical method statements and drawings, and delivering comprehensive services and equipment solutions.

Technical Solution Development:

• Collaborate with the commercial/business development team to develop innovative and competitive technical solutions for bidding projects.
• Prepare detailed technical method statements, drawings, and integrated service and equipment solutions to meet project requirements.

Bid Review and Analysis:

• Thoroughly review and understand bidding employer’s requirement documents, project specifications, and process data.
• Translate employer requirements into effective contractor solutions that align with project goals.

Market Monitoring and Adjustment:

• Continuously monitor market trends and adjustments to ensure tender documents remain competitive and relevant.
• Implement improvements in the tender process to enhance the company’s market position and competitiveness.

Cross-Department Collaboration:

• Work closely with various department stakeholders to gather necessary information for bidding proposals.
• Consolidate and integrate collected information into comprehensive bid proposals.

Internal Reporting and Management Approval:

• Conduct detailed internal reporting of tender solutions to secure management approval for bid submissions.
• Provide timely and accurate updates on bid progress to the tender manager.

Commercial Bid Support:

• Support the tender manager in developing commercial bid solutions and engaging with the market as required.
• Participate in market visits to assess and incorporate subcontractor solutions into the company’s proposals.

Subcontractor Solution Review:

• Evaluate subcontractor technical solutions to ensure alignment with project requirements and company standards.
• Integrate subcontractor solutions into the company’s bid proposals effectively.

About you:

• Minimum Diploma or Bachelor’s Degree in Engineering, or a related field.
• Prior experience and knowledge in offshore projects are highly desirable and will be given preference.
• Proven experience in technical solution development, preferably within a commercial/business development context.
• Strong understanding of bidding processes, tender documentation, and market trends.
• Excellent analytical skills and attention to detail.
• Effective communication and collaboration skills to work with cross-functional teams.
• Ability to manage multiple projects and meet tight deadlines
• Willing to travel overseas for project needed.

Other information:

Work location: Jurong East

Working days: 5 days work week (Monday to Friday - 9am to 6pm)

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

Key Responsibilities:

• Responsible for MEP Design, taking off BOQ, sourcing the quotation and prepare quotation.
• Lead the development and submission of high-quality M&E tenders, ensuring compliance with all client requirements and deadlines.
• Attend site visit for tender briefing.
• Interpretation of tender specifications, client requirement, drawings and any other relevant documents; not limited to Project Presentation, Schedule of Rates, Technical Data, Risk Assessment, Bill of Quantity and documents needed for Tender Submissions.
• Understand how to do MEP design to comply with Singapore Standard.
• Liaise with suppliers and contractors to get proposals/quotations and carry out evaluation.
• Able to assist client for Value Engineering.
• Conversant with Singapore building codes and regulations.
• Demonstrate effective communication and consultative skills.
• Strong in communication skills and a team player.
• Provide guidance and support to project teams in the implementation of successful M&E practices.
• Ensure adherence to company policies and procedures throughout the tender process.

Job Requirements:

• Preferably hold a Diploma or Degree in Electrical Engineering
• At least 2 years of relevant working experience in Interior Fitting Out M&E Works
• Preferably have knowledge on how to prepare M&E technical design, technical write-up, prepare tender specifications and presentation slide for tender interviews
• MUST understand the process of tender preparation and submission
• MUST have experience in project costing and estimating
• MUST know BCA Green Mark Requirement
• Strong in Tender Presentation Skill
• Highly self-motivated, good working attitude with high level of professionalism & integrity
• Well-versed in MS offices tools i.e. Words, Excel and PowerPoint
• Strong understanding of M&E methodologies and best practices.
• Excellent written and verbal communication skills.
• Requires travelling to various worksites in Singapore
• Requires to perform night work/weekends when need arises.
• This position is only open to Singapore citizens and Permanent Residents.

Job Description & Requirements

Duties & Responsibilities

• Assist the Team Leader and Job Captain in the performance of their duties
• Supervise the other design drafting team
• Ensure quality and accuracy of designs
• Ensure compliance with project Design Criteria/Client Brief/Approved Concept
• Ensure compliance with relevant design standards and office standards
• Attend and participate in design meetings
• Ensure compliance with ISO Quality Procedure Manual

Requirements

• A bachelor’s degree in mechanical engineering recognised by Professional Engineers Board.
• Entry level with some consultancy internship experience are welcome to apply
• 1-2 years of design experience in consultancy firm would be advantageous
• Must have prior hands-on design experience in the design of ACMV, Fire and Hydraulic services for large scale building projects
• Experience in Rail and infrastructure projects and data centre an advantage

Additional Requirements:

• Good interpersonal and communication skills
• Must be fully familiar with local and international codes
• Hands-on experience with relevant engineering software and BIM
• Must be able to work independently
• Must have a good understanding of unit costs of the MEP services in various types of projects

As an Engineer (Facilities Management & Engineering), you will assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements. Specifically, you will develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations. Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

Requirements

- Bachelor’s degree in Mechanical Engineering/ Facilities Management with a minimum of 2 years of relevant experience

- Prior training in management roles and supervisory experience of maintenance services for healthcare buildings and facilities would be advantageous

- Exposure to Heating, Ventilation, and Air Conditioning trades­ is preferred

- Excellent interpersonal and communication skills

- Self-motivated with the initiative to complete tasks and projects assigned