Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 3 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Support the selection and design of components for inspection systems.
• Accurate documentation and supplier compliance with specifications.
• Provide troubleshooting support and manage the integration of new designs into manufacturing processes.

Requirements:

• Proficient in CAD software for electrical and schematic design.
• Experience in designing, fabricating, and testing PCBs and PCBAs is beneficial

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Responsibilities:

• Manages internal and customer projects from engagement until project closure through proper planning and timely execution by working with internal cross-functional teams and customer
• Maintains documentation of customer projects starting from Kick-off, Engineering build, Qualification and Off-load to full production
• Reviews and analyses customer’s specifications and requirements in terms of material, process and assembly specification
• Initiates team discussion/ review on customer document gaps/ discrepancies and recommend proposals to customer
• Plan and generate detailed customer project activity timeline, track progress and anticipate potential issues and resolve it with internal stakeholders
• Ensures that customer indices are monitored and reviewed by having regular meet-up and review of team performance
• Develop and grow people project management skills, adopting on dynamic changes and crisis management
• Drive for productivity improvement and cost reduction in process integration
• Work with TPM/ Sales/ customer for new design win and handle NPI engineering activities- reliability / Yield and Quality issue

Requirements:

• Degree/Diploma in Electrical/Electronics, Engineering or equivalent
• Minimum 3 years of Engineering experience in Semiconductor manufacturing industry
• Preferably with Project Management Certification
• Knowledge of how bumping, assembly material interact with package workmanship and reliability would be preferred
• Knowledge on WLCSP bumping process of 2P2M; DOE/SPC / FMEA /JMP/ APQP standard
• Bumping process knowledge on (Lithography, Sputter, Etching, Plating, Descum & Ball drop process preferred

• Perm Opportunity
• Must have hands-on implementation experience on Azure Cloud Security, including experience with Azure Sentinel, Microsoft Defender for Cloud, and Azure Policy.
• Preferably with certifications of the following: CCSP (Certified Cloud Security Professional), Azure Security Engineer Associate, CISSP, etc.

As a Senior Security Engineer, you’ll play a key role in managing security incidents, performing threat hunting using SIEM/SOAR tools, and supporting IT audits. This role also involves overseeing vulnerability assessments, leading security projects, conducting training sessions, and ensuring IT security for vessels. You’ll engage with external parties to stay updated on cyber threats and provide expert advisory for security projects.

Job Description

Security Incident Management

• Investigate security incidents and conduct threat-hunting activities using SIEM/SOAR tools (e.g., Microsoft Sentinel).
• Maintain hands-on experience with security monitoring tools.

Audit and Governance

• Participate in internal and external IT audits, and maintain incident response plans and IT policies.
• Conduct vulnerability assessments, penetration tests, and security awareness training, including phishing campaigns.
• Design and review IT/cybersecurity architectures.
• Collaborate with external entities (e.g., CSA, MPA) on the latest cyber threats and trends.
• Support vessel IT security setup, audits, and remediation.

Project Security Oversight

• Manage and lead security-related projects and provide security advisory for all projects.
• Participate in RFP and RFQ processes.

Requirements

Education and Experience

• Bachelor’s degree in Information Security, Computer Science, or related fields, with a minimum of 3 years of relevant experience.
• Deep knowledge of IT Security, Cloud Security, and industry standards (NIST, ISO 27000, IMO).
• Advanced skills in Azure Cloud Security, including experience with Azure Security Center, Microsoft Defender for Cloud, and Azure Policy.

Technical Expertise

• Broad IT Security Management experience across areas like network, server, application, endpoint, and access security.
• Proficiency in managing network security devices (NextGen Firewalls, IDS/IPS, UTM, NAC, AV), Windows, Linux, and networking services.
• Extensive hands-on experience with Azure cloud computing, especially in security architecture and DevOps integration.

Certifications

• Preferred: CCSP (Certified Cloud Security Professional), Azure Security Engineer Associate.
• Additional certifications such as CISSP, CISM, CEH, and ideally two or more of SC-200, SC-300, AZ-500, MS-500, SC-100.

Preferred Knowledge

• Maritime cybersecurity standards, including IMO guidelines and TMSA.
• Experience in vessel IT security is a strong advantage.

Triton AI Pte Ltd
Registration Number: R1980724
EA: 21C0661

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities

• Responsible for the installation, configuration, administration, monitoring and daily maintenance of enterprise-wide application such as Apache HTTPd, Apache Tomcat, JBoss , Websphere Application Servers, Kubernetes, Kafka, IBM-MQ.

• Interact with Software Development and infrastructure teams to define hardware requirements required to implement application solutions and troubleshoot technical issues

• Interaction with business units and project managers to solve variety of business - technical issues

• Interact with software, network and UNIX infrastructure administrators to seamlessly implement solutions to complex technical issues

• Evaluate and select middleware technology based on application design needs proof of concept design studies

• Troubleshooting web and middleware environments

• Identify potential and real performance bottlenecks within web environments

• Using troubleshooting methods to differentiate between an infrastructure or environment problem vs

• Administration of Web environments

• Advanced Web/Java troubleshooting (analyzing heapdumps, threaddumps)

• Constantly update documentation as necessary to reflect system setup and environment.

• To handle escalation seamlessly to avoid any gaps that may arise to meet or exceed SLA.

• To utilise ITSM process and tool support.

Requirements

• Diploma/Degree in Information Technology/Computer Science/ Computer Engineering or equivalent.

• Working experience in Linux and Windows system.

• Knowledge or work in environment using Azure or AWS a plus

• Strong implementation and administrative skillsets for Linux system especially RedHat

• Good knowledge of open source cloud Platform-as-a-Service, Infrastructure-as-a Service (PaaS and IaaS) , solutions like Red Hat OpenShift Container Platform and related technologies like Docker containers and Kubernetes container orchestration

• Prior experience providing enterprise-wide support, including OpenShift, private/public cloud and on-premises and systems support

• Possess analytical mindset

• Possessed initiative that would improve productivity and efficiency.

Licence no: 12C6060

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design. To be cost-effective, the whole outturn cost of the design solution must be considered, including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• Monitor installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall have Excellent knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff.
• The candidate shall assist in ensuring a safe working environment for all staff.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The candidate shall have at least 8 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind, with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 5 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• Lead the site supervision team on all the Civil and Structural and Building Construction works.
• Assist Chief Resident Engineer and Construction Manager on all Civil & Structural site inspection issues, contract related matters and support the identification of defects and supervise rectification works.
• Address and respond to all Contractor’s RFI’s and technical submittals. Other work scopes include but not limited to assess method statements/instrumentation reading, coordinate with other discipline engineers and liaise with design team/QP from HQ.
• Attend all site/project related meetings, discussions with clients and/or Contractors and to lead in technical and work progress discussions.

Qualifications:

• Good graduate Degree in Civil & Structural Engineering, preferably recognised by the PE Board, Singapore.
• Minimum 10 years of construction experience in supervising civil and structural works in water/used water treatment works.
• Registered with IES as Resident Engineer (Civil).
• A person with good communication and leadership skills.

We are seeking a highly skilled Cloud/DevOps Engineer to contribute to significant government projects!

• Join a team that utilizes technology to enhance the lives of Singaporeans.
• Hybrid working arrangement.
• Competitive remuneration package. (Monthly competency allowance + Variable bonus)

Responsibilities:

• Design, implement, and manage AWS cloud infrastructure to support scalable, reliable, and secure services.
• Design, implement, and maintain CI/CD pipelines to automate software build, test, and deployment processes.
• Maintain configuration management, build, continuous integration, and deployment tools.
• Source code management and collaborate with development teams on branching strategies and versioning.
• Monitoring automation to effectively detect/predict/prevent issues in the environment and code base.
• Streamline operational tasks, monitoring, and infrastructure provisioning.
• Design and implement production infrastructure architecture based on application requirements, ensuring scalability, availability, and security.

Job Requirements:

• Singaporean only.
• Minimum of 3 years of relevant Cloud/DevOps experience.
• Proficient in containerization technologies such as Docker and Kubernetes.
• Proficient in configuration management systems (Terraform, Packer, Ansible).
• Proficient in AWS (Related certification will be advantageous).
• Strong scripting skills in Python, Bash, JavaScript and shell scripting.
• Prior experience in government/public-facing projects is advantageous.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Job Description:

• You have a degree in computer science or a related field (bachelor's/master's).
• You value high-quality code and want to improve and share your knowledge of the latest technologies every day.
• You have at least 6 years of professional experience in the Java stack. A second stack (e.g. Node.js or .NET) is a plus.
• You have multiple years of experience with state-of-the-art architectures and enjoy developing modern cloud native applications.
• You have worked in web front-end development with frameworks like ReactJS or Angular where you apply your in-depth knowledge in JavaScript and/or TypeScript.
• You have managed the lifecycle of full-stack applications, including CI/CD and automated testing frameworks and vulnerability scanning tools. Hands-on experience with infrastructure and platform is a plus.
• You have experience effectively communicating with stakeholders outside of your team in agile environments. Experience as team lead or Scrum Master is a plus.
• You have strong communication skills and like making decisions.

Executive Summary

Smart IMS Inc provides Digital technology & Cloud transformation services, Application & Infrastructure Management Services, Unified Communications and Insurance implementation services to customers across the Americas, Europe, Middle East, and Asia-Pacific regions. As the trusted technology and business partner of leading MNCs, including Global Investment Banks, Smart IMS is also a Microsoft Gold Certified Partner, Oracle Platinum Partner and AWS MSP Partner.

We are looking to hire a VMware Engineer to support our client in Singapore which is a top global investment bank. The role of the incumbent is to handle the installation, configuration and management of the VMware private cloud computing platform. With his knowledge and skills, he/she can suggest amendments in the current installation / configuration procedures, which are more beneficial to the respective implementation project(s) at hand.

Responsibilities:

• Involved in the installation, configuration and management of VMware private cloud computing platform
• Install new components into production environment as laid out by Virtualization Engineering Team(s)
• Make configuration amendments into the existing production plant
• Ability to present ideas in business-friendly and user-friendly language appropriate to both executive and managerial audiences.
• Ability to effectively manage relationships with other implementation teams, application teams, stakeholders, business and customer representatives.
• Organizational skills with attention to task details, documentation and target dates.
• Strong written, oral, and interpersonal communication skills.
• Team orientated, willing to share knowledge and collaborate with peers.
• Proven analytical, strategic vision drawing on strong problem-solving abilities.
• Able to prioritize and execute tasks in a high-pressure environment.
• Ability to conduct research into server, storage, virtualization issues, standards, and products.

Requirements:

• 5-7+ years of previous experience Implementing / Architecting & virtualization experience, across multiple vendor and technologies.
• In-depth understanding of Cloud, Server, Storage, and Virtualization architecture design techniques, theories, principles, and practices.
• Solid experience in implementing enterprise Cloud, Virtualization, Server and Storage systems within a broad spectrum of technologies.
• Excellent Knowledge of Private, Public and Hybrid Cloud environments
• Excellent Knowledge of Cloud Orchestration platforms
• Intermediate knowledge of Windows Server, Linux, in HA/DR type configurations.
• Excellent knowledge of Sever hardware platforms: x86
• VMWARE Cloud, Virtualization, Server and Storage vendor Certifications Preferred.
• Strong knowledge & working experience of VMWare modules such as ESXi, vSphere, vSAN, vRA, VRO, VROPs, vRLI, NSX-T, Horizon View
• Strong knowledge of SAN, NAS, DAS, RAID, SCSI, Fibre Channel, Backup to Disk, clustering, encryption technologies from multiple vendors.
• Strong proficiency in PowerShell, Shell scripting / Python / Ansible development

Our manufacturing company designs and manufactures metal precision components, molds, and precision-pressed materials.

Of course, people with Process experience are of the utmost importance but they have to be able to speak English and be able-bodied for the job posted.

Malaysian PRs welcome to apply.

Job Description & Requirements

1) Read and interpret blueprints, technical drawings, schematics, and computer-generated reports.

2) Confer with engineers and other personnel to implement operating procedures, resolve system malfunctions, and provide technical information.

3) Responsible of setting the machine to meet the First Article base on the customer print, tolerance, and dimensions.

4) Responsible of assisting the Machine operator to meet their goals.

5) Responsible to edit program to suit different machines will be preferred

6) Specify system components or direct modification of products to ensure conformance with engineering design and performance specifications.

7) Research, design, evaluate, install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles.

8) Oversee installation, operation, maintenance, and repair to ensure that machines and equipment are installed and functioning according to specifications.

9) Conduct research that tests and analyzes the feasibility, design, operation and performance of equipment, components and systems.

10) Develop, coordinate, and monitor all aspects of production, including selection of manufacturing methods, fabrication, and operation of products.

Salary: up to $8000

Duration: 6 months

Working Days & Hours: Mon-Fri Office Hours

Location: Kranji

Job Description:

Support Site Manufacturing (Upstream/Downstream) Activities Through:

• Planning and executing activities required for process investigation such as performing process impact assessment, participating and performing root cause analysis. Work with cross functional teams for process issues investigation
• Analyzing process trends, monitoring process performance as part of the CPV program. Escalate and perform investigation in event of any out of trend or process issues
• Leading process investigations to identify root cause and implement action plans to correct or prevent re-occurrence
• Planning and executing process improvements and robustness projects
• Leading/supporting cycle development for process parameters where applicable
• Drafting process training slides and providing process training to cross functional teams
• Raising change controls as change owners for process changes
• Performing impact assessments for relevant change controls
• Providing technical /process parameters for creation and revision of master batch records. Review master batch records.

Lead/Support Technology Transfer for New Technologies/Product Introduction Through:

• Leading/Supporting the evaluation of new manufacturing technologies and/or equipment for process improvement or process capabilities build
• Planning and executing technical transfer activities according to project timelines. Raise change controls where applicable to support the technical transfer
• Monitoring process performance and trending through the site CPV program. Proactively investigate where required to ensure process robustness.
• Performing risk assessment, drafting required technical transfer and process control strategy documents and updating lifecycle documents
• Authoring study and process validation protocols and reports where needed

Others:

• Support audits, regulatory submissions and responses
• Support and execute global manufacturing sciences initiatives according to project timelines
• Responsibility to adhere to any applicable EHS requirements.
• Commitment to a fair and respectful relationship to others and behavior in accordance with Takeda’s Code of Conduct.
• Any other duties as assigned by supervisor.

Job Requirements: Min Degree in Biochemistry, Chemistry, Chemical Engineering, Biotechnology, Biochemical Engineering with minimum 3 - 4 years of relevant experience in pharmaceutical industry

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Salary: up to $7500

Working Days & Hours: Mon-Fri Office Hours

Location: Tuas (islandwide pickup)

Job Description:

• Manage and maintain the validated status of the EAMS maintenance management system by working with Quality Assurance team, Automation Information team, E/I maintenance team and vendor, on the data base, software and hardware validation.
• Manage and supervise a team of Calibration/E&I Technicians to perform instrument calibration and instrument maintenance activities (CAL, COR, and repairs) according to procedures, good engineering practices and cGMP.
• Perform day-to-day planning and scheduling instrument calibration and instrument maintenance activities to ensure smooth production.
• Develop instrument calibration and instrument maintenance program to maintain plant instrument assets. Review and modify the PM Calibration to improve instrumentation, control and reliability.
• Be the System Administrator /SuperUser on EAMS applications and conduct training to new user(s).
• Manage and utilize the EAMS as an effective tool to support the calibration team in compliance with cGMP and good maintenance practices.
• Maintain the quality and accuracy of data integrity of the EAMS system.
• Support manager to achieve financial objectives by preparing and controlling against approved annual maintenance budget; scheduling expenditures; analyzing variances; initiating corrective actions for instrumentation, control and repairs.
• Lead/participate in continuous improvement initiatives and support (IRS/QAR) investigations.
• Manage and maintain calibration Standard Operation Procedure (SOP) by generating procedures for the operation, review procedures, optimize procedures and training of procedures to the E/I calibration team.
• Manage and execute any modification and control of the calibration system in compliance with cGMP and good maintenance practices.
• Track instrument performance and conduct bench marking by tracking instrument breakdown, re-occurrence failure and instrument history report to enable Maintenance Team to focus on areas that required attention.
• Provide relevant operation and performance reports by generating reports on instrument maintenance work/PM statistics.
• Support maintenance operations and shutdown activities by working with Supervisor and Engineer on developing the annual PM plan, setting work priorities; scheduling PM activities, coordinating and resources planning to meet the schedule in cost-effective way.
• Implement and maintain calibration record filing system by keeping all calibration documentation records and reports for fast retrieval, audit ready and comply to cGMP requirement.
• Work with E/I Supervisor and Maintenance Planner to enhance maintenance activities on Global Reliability Program (GRP) / Preventive Maintenance Optimization (PMO).
• Coordinate between the E/I and Production team; Area owners and Maintenance Repair & Operation (MRO) store on shutdown activities and major maintenance jobs, plan and schedule calibration/PM work orders accordingly.
• Work with E/I Supervisor and Maintenance Planner on updating the Key Performance Index (KPI) established.
• Liaise with Production to support new product tech-transfer, project construction and commissioning through active involvement in commissioning activities; discuss instruments hardware improvement and modifications.
• Maintaining good working relations with team by working closely with E/I, Automation, Production and vendor in consultation with the team to resolve any issues.
• Support Project team on special / urgent assigned projects to meet the requirement, schedule and budget target.
• Maintain a safe and clean working environment on areas under one’s responsibility.
• Provide training (e.g. OJT) and coaching to colleagues to build-up their competencies.
• Participate IMEx Process Centric Team Tier 1 meetings and address engineering issues based on priority.
• Develop or support TPM-OPC checklists, train and coach operation team in OPC tasks and knowledge.
• Complete all assigned training on-time and also prior to work execution.
• Contribute to team effort by accomplishing desired results/KPIs.

Job Requirements: Min Degree in Engineering with minimum 10 years of relevant experiences in pharmaceutical, chemical, or petrochemical industries.

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

• 5 Days (Mon-Fri) 830am-5pm
• $2,800-$3,800 + $120 Transport Allowance
• Gambas Crescent, Nordcom 1

Responsibilities:

• Attend to client side to solve their machineries issue

Requirements:

• Knowledge of Electrical & Mechanical
• Few years of hands-on experience on repair & servicing of machineries
• Able to travel within short notice
• ITE or diploma Cert

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Electrical Engineer (Marine offshore)

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday to Friday 8.30am to 6pm.
• Salary range: S$ 3,500 - 4,200

Job Responsibilities:

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/ BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).
• Any other ad-hoc duties as assigned.

Requirements:

• Diploma or Bachelor’s Degree in Electrical Engineering.
• Hands on experience with vessel mechanical and engine systems.
• Experience with engineering design software.
• Familiarity with maritime HM&E systems and naval construction processes.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Supporting the Mechanical maintenance team, you will be responsible for the effective maintenance plant and equipment to achieve high reliability and availability in accordance with statutory, regulatory and safety requirement.

Responsibilities

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• Responsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs
• Track the year to date expenditure against the approved department budget
• Manage a team effectively through day-to-day activities.

Requirements

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board.
• At least 5 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries.
• Sound Mechanical engineering maintenance knowledge. Good knowledge of safety and statutory requirement will be an advantage.
• Self-motivated team player with analytical mind, strong planning and problem solving skills.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.