Total 3,699 Engineering job vacancies in Pasir Ris, North East

Job Description & Requirements

• 1 year relevant experience with photonics & lab instruments
• 1 year relavant experience with laser cutting, laser marking & laser welding euipments
• work independantly and create own customers base
• Able to drive and bilngual
• Polytechnic graduate
• Able to travel and work irregular hours
• able to work on commission

This is a 12-month contract role based in Singapore.

Looking for a Subsea Operations Support Engineer responsible for the Operational support of one of the world’s largest and most complex networks. As a member of this team, you will have a unique opportunity to operate and maintain the subsea cables and get involved in all aspects of operations.

• Support multiple subsea cables O&M, and troubleshoot a variety of issues in a timely manner.
• Perform fault isolation based on the troubleshooting outcome.
• Coordinate with NOC, smart hands and equipment manufacturers to resolve issues and restore service.
• Work cross-functionally and cross-regionally with other network operational support teams.
• Partner with and escalate to, various teams in pursuant of restoring service and limiting impact.
• Manage and escalate critical events while communicating clearly and concisely.
• Document and optimize operational processes and procedures.
• Contribute to the creation of monitors, alerts, dashboards and metrics to drive continuous improvements.
• Identify areas for automation and create or participate in the solution with scripting or coding skills.
• Support deployment activities and operation readiness.
• Partner with audit teams to ensure accurate inventory and documentation.

Minimum Qualifications:

• Experience in Subsea Operations, Deployments and Technology with 8-10 years industry experience
• Technical experience in telecommunication networks in the subsea optical transport networks including DWDM, network infrastructures, IP Networking equipment, optical testing, optical measurement principles, experience with photonic layer
• Knowledge and experience of Subsea and DWDM technology.
• Knowledge of Subsea technology including open cables, WSS ROADMs, Branching Units and Repeaters.
• Experience understanding architecture for system dependencies and translate these into deployable solutions.
• Experience in analyzing situations, troubleshooting, systems and tools, and problem solving.
• Experience managing and switching BU’s, WSS BU’s
• Experience managing PFE and troubleshooting complex subsea power and grounding issues.
• CLS Management experience including facilities maintenance and security
• Experience identifying key metrics/measures that will be used to evaluate success and validate the business impact of the program
• Experience in the Subsea O&M including (but not limited to), marine repair and maintenance (including depot testing and sparing), marine repair dispatch and spares loading
• Hands-on experience with CLS tools and test equipment, in managing landing party use and setup of equipment during repairs
• Familiarity with DCN operations, management, network security and architectures
• Documentation and communication experience.
• Knowledge with the Network Management system (NMS), Element Management system (EMS) and CLI interfaces of different vendor platforms.
• Ability to operate autonomously, strong analytical skills, coupled with a strong sense of ownership, urgency and drive.

UEN: 199700895N

The Singapore University of Technology and Design (SUTD) has topped the list of emerging engineering schools (MIT report, 2018) and possesses a unique structure and mission within the vibrant nation of Singapore. SUTD features the integration of design with engineering, an intimate student to faculty ratio, an innovative active learning pedagogy, an interdisciplinary pillar organization, a stellar faculty, and a beautiful new campus. The Engineering Systems and Design (ESD) pillar within SUTD offers exceptional undergraduate and doctoral degrees with focus on Business Analytics and Operations Research, Financial Services, Supply Chain and Logistics, and Aviation Systems. ESD undergraduates are prepared for a wide range of engineering and management careers in private and public sectors, including healthcare, banking, manufacturing, supply-chain, energy, transportation, and entertainment and hospitality. They are equally adept at entrepreneurship and boldly initiating start-up ventures.

Job Requirements for Tenure-track/ Tenured Faculty

We seek to fill positions in several areas including but not restricted to statistical and machine learning (ML), artificial intelligence (AI), operations research, data science, and industrial and systems engineering, with applications to healthcare, sustainability, supply chains and logistics, urban mobility, and quantitative finance.

The successful candidates will have earned or be nearing completion of a doctorate in an engineering systems-related field and have solid grounding in one or more systems methodologies including, but not limited to, AI/ML, optimization, stochastic modelling, statistics, game theory, financial engineering, and simulation. Empirical, experimental, computational, and analytical research approaches are all welcome. Candidates must be committed to excellence in teaching at the undergraduate and graduate levels and to developing and maintaining an active research program.

Successful candidates can look forward to competitive remuneration, assistance for relocation to Singapore, and attractive research start-up packages through SUTD Kickstarter Initiative (SKI) and grant opportunities.

A candidate’s full application package should include:

1. A cover letter

2. Curriculum Vitae (CV), including publications

3. Research statement / plans

4. Teaching statement / plans

5. 3 representative research papers

6. Contact information of 3 referees

Interested and qualified candidates should apply online via https://careers.sutd.edu.sg/job/Singapore-Faculty-Position-Tenure-TrackTenured-%28Engineering-Systems-and-Design%29-138682/13958844/

JOB DESCRIPTION

• Responsible for plan, schedule and execute all system backend (Hardware & Software) and ensuring successful and timely completion of the projects
• Maintenance activities
• Troubleshoot and fix adhoc system & network faults
• Conduct regular maintenance activities such a system inspection/monitoring, system backup, disk space monitoring and housekeeping, patching and upgrading of various software and Operating systems.
• Handle related software projects and processes.
• Analyze customer function, hardware design or system design requirements and create or update software requirement specification accordingly
• Liaise with various sub-vendors in the delivery and work to be carried out to ensure that all are in accordance with the agreed schedule
• Knowledge of setting up a service monitoring system is preferred.
• Prepare maintenance related documents such as maintenance reports, incident reports , etc.

REQUIREMENTS

• Degree in Computer Engineering, Mechanical & Electrical Engineering, Civil Engineering, Information Systems or equivalent
• Minimum 3 years of relevant experience
• Knowledge in networking technologies and ability to configure/maintain network equipment
• Experienced in Windows system administration
• Good communication skills both verbal and written for English
• Team player and willing to learn
• Able to work independently
• Ability to multi-task and good time management skills
• MS SQL database experience
• Provide good rapport and support to customers
• Assist to prepare documents on delivery of goods etc.

Qualifications & experience

• At least a Diploma in engineering or equivalent
• Minimum of 3 years relevant experience in QA/QC/QMS. Experience in handling audits will be considered an asset.
• Familiar with medical device standards such as ISO13485, ISO14971, ISO17025, GxP etc.
• Equipped with excellent quality management knowledge and problem solving skills such as 8D, SPC, DOE, statistics etc
• Advanced written and verbal communication and intern-personnel skills
• Able to meet schedules and work independently with minimum supervision

Tasks & responsibilities

• Manage and maintenance of the Quality Management System as per relevant standards such as ISO 13485, ISO17025, 21 CFR 820, IVDD/MDD and GxP etc.
• Conduct quality control for imaging product and imaging services to ensure the high level of compliance for products/services in all quality aspects
• Provide assistance in all internal and external audits (for example, ISO and suppliers)
• Identify, initiate and drive quality projects for continuous improvement of product/service
• Coordinates with other functions to develop business process and perform proactive risk management (risk identification, assessment, analysis and control)
• Assist in preparing and compiling dossier for regulatory submissions if required
• Other duties may be assigned as appropriate

As part of IME’s Photonics & Sensors Department, the candidate will take lead of the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices at high RF frequencies, as well as the testing of electro-optical sub-modules and sub-systems. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices from frequency range of 0 to 110 GHz
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Manage photonics laboratory including facilities, health and safety, equipment calibration, inventory and stocktake
• Take the lead to procure laboratory equipment and consumables
• Prepare technical presentations and papers for internal meetings, as well as conferences and journals
• Collaborate with project team to ensure quality and on-time delivery for various projects
• Performs other duties as assigned.

Qualifications:

• Bachelor’s or master’s degree in Physics, Electronic/Electrical Engineering, Photonics, Opto-electronics or equivalent
• More than 5 years hands-on experience in active photonics/optoelectronic device testing, especially for high-speed optical modulator and photodetector devices and electronic-photonic integrated circuit.
• More than 5 years hands-on experiences in optical setup construction and semiconductor & optoelectronic device characterization
• Experienced on experimental data acquisition and analysis
• Skillsets in programming or instrument automation is a plus
• Strong skills in problem-solving, communication and providing technical presentations
• Industry experience and awareness is a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma holders with at least 5 or more years of experience in Mechanical/Electrical/Chemical engineering or equivalent with at least 5 years of relevant experience
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities

• The candidate will be required to perform electrical testing, test data analysis & automation across SiC power and RF/mmWave GaN devices.
• The candidate hands-on characterization work will encompass from low voltage I-V/C-V to high voltage breakdown, switching performances for SiC, and DC & high-frequency characterizations for RF/mmWave regime.
• The candidate must have hands-on experienced in handling Keysight 4156C and B1500A/Keithley K4200 Device Analyzer, B1505A High Power Device Analyzer with N1265A UHC Fixture and Keysight 4284A/4285A and E4908A LCR Meter independently on their own.
• It will be a plus if the candidate has knowledge of instrumentation control using LabView and some other software like Python, C++ etc .
• The candidate is required to have at least some basic semi-conductor knowledges of semi-conductor devices like P-N Junction, Diodes, CMOS etc.
• The candidate can be exposed to process and device design/simulation with commercial TCAD tools (e.g. Silvaco Victory Process and Victory Device, Sentaurus Process and Device, etc) as part of the learning development and eventually be working on wide bandgap devices team.

Qualifications:

• Bachelors / Masters' degree in Electrical Engineering, Materials Science, Mechanical Engineering, Chemical Engineering, Chemistry, Physics or equivalent.
• At least 5 years of relevant experience. Applicants with relevant study (Electronics, Microelectronics, Computer Engineering, etc) can be considered.
• Strong communication, industry awareness, and problem-solving skills.
• Highly motivated to succeed, a self-starter who is driven and able to work with others effectively to "get things done".
• Industry experience is a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Purpose

The Professional Officers Division (POD) houses a centralized pool of academic staff under the Professional Officers scheme. Professional Officers come with specialised and deep technical skills acquired through extensive industry experience. They form the talent pool which brings a much-needed industry perspective to student learning. They facilitate applied learning and applied research in SIT, complementing the academic expertise of the faculty to bring industry practices and applications into the curriculum.

Professional Officers leverage on their industry experiences to create authentic learning environments, where discovery and innovation take place. They act as coaches and mentors to students during practical learning activities such as laboratory sessions, Capstone Projects and the Integrated Work Study Programme (IWSP). Professional Officers could also lead or work with faculty on industry innovation projects to provide solutions to the industry.

In addition to their role in applied learning and applied research, Professional Officers manage the centralised laboratory facilities and resources in SIT. With Technical Officers, laboratory safety professionals, and administrators in POD, they jointly develop central policies and processes for the safe and seamless operation of laboratories in SIT.

Key Responsibilities

• Design and teach labs & practice modules.
• Mentor students in Capstone Projects and the Integrated Work Study Programme (IWSP).
• Lead or co-lead innovation projects with industry.
• Manage labs and equipment to support academic programmes and applied research.
• Ensure safety in labs

Job Requirements

• A good degree in Building Services, Mechanical Engineering or a related field. Masters, PhD and/or relevant professional certifications like registered PE/CEng would be advantageous.
• Deep technical specialist with 10 or more years of working experience with mechanical systems in Building services environments or facility design consultancy would be preferred.
• Experience in following areas is highly desirable:
• Both design and management of mechanical building systems.
• Use of BIM software for design and engineering works and develop BIM models as well as knowledge in using CAD software such as REVIT, AutoDesk and ArchiCAD.
• Have working knowledge of building services systems such as Heat Ventilation Air Conditioning (HVAC), refrigeration, lift, heat exchangers, micro-climate, simulations, fire-testing and acoustic experiments
• Have prior working experience in building and facility management
• Having experience with materials and materials property as well as materials testing, and fire testing is advantageous.
• Extensive experience and knowledge of industry practices to bring industry perspective to SIT as well as experience with Green Marking and energy management is advantageous.
• Keen interest in innovation projects, with demonstrated ability in developing solutions to technical problems.
• Strong supervisory skills and enjoy working closely with students in an educational environment.
• Demonstrate proficiency to keep abreast of development in the field and pursue professional certification programs. Possess industrial certifications in relevant areas will be an added advantage.

At FLEXXON, we foster a culture of innovation, creativity, and inclusivity. You'll have the opportunity to work alongside talented individuals who are passionate about making a difference. We offer a dynamic and supportive work environment that encourages professional growth and recognizes your achievements.

If you are excited about the prospect of taking on new challenges, making an impact, and contributing to the success of our products, we would love to hear from you.

Responsibilities:

• Present product and solution in response to customer enquiries and problems
• Market research, analysis and competition to formulate product strategy
• Design and manage product communications including external and internal feature announcements, use case, reference materials and press releases
• Manage storage products, and responsible for the whole process from demand, spec, design, development, testing to mass production
• Analyse, troubleshoot and resolve issues.
• Work with R&D and other cross-functional counterparts to drive development of advanced features and technology

• Degree/Diploma in Electronics Engineering, Computer Engineering, Microelectronics or related major
• Good presentation and communication skills, excellent in written and spoken English and Chinese
• at least 4 years of product (SSD) or project management experience
• Familiar with Windows and Linux operating system preferably, if have
• Ability to work independently and as a team, with strong analytical and multitasking skills

YouTrip is a Southeast Asian financial technology company dedicated to creating the next-generation of digital financial services for consumers and businesses. In 2018, we launched the region’s first and leading multi-currency payment app.

With our consumer and corporate products, YouTrip and YouBiz, we empower users with the most affordable and convenient financial innovations. YouTrip is a Major Payment Institution licensed by the Monetary Authority of Singapore (MAS), and owns principal memberships and issuing licenses with two of the largest card schemes, MasterCard and Visa.

YouTrip has been recognised by industry experts, winning awards for FinTech Employer of the Year by MAS and Singapore Fintech Association (SFA), Most Innovative FinTech Company in Southeast Asia and Best SME Finance Management Platform from APAC Insider’s 2023 Singapore Business Awards. We were also recently recognised as one of the Top Startups in Singapore by LinkedIn, further cementing our position as a leading fintech company in the region.

Our culture is entrepreneurial, open & inclusive, and teamwork-oriented. We are looking for talents with the aspiration to thrive in a rapidly growing business in the exciting FinTech space.

Job Description: DevOps Engineer

As a DevOps Engineer, you will be responsible for bridging the gap between development and our AWS based infrastructure, ensuring the seamless integration of these two critical functions. Your role is pivotal in enhancing our software delivery processes and maintaining a reliable infrastructure. You will work at the intersection of technology, collaborating with development teams to streamline the deployment, delivery, and management of software products. Your contributions will directly impact our ability to deliver high-quality software to our users efficiently.

Responsibilities:

• Ensure our AWS cloud based infrastructure is highly available, scalable, reliable, and runs efficiently.
• Design, develop, and maintain automation scripts and pipelines for provisioning, deploying, and managing infrastructure and applications.
• Spearhead our CI/CD efforts, ensuring smooth and efficient delivery pipelines for software releases.
• Embrace the power of IaC tools like Terraform to build and manage infrastructure components.
• Work your magic with Docker and orchestration tools like Kubernetes to manage containers effectively.
• Collaborate with cross-functional teams to ensure DevOps best practices are integrated into our development processes.
• Keep security at the forefront, implementing best practices and security measures throughout the infrastructure.
• Investigate and resolve issues related to deployment, configuration, and system performance.

Requirements:

• 4+ years of experience in a DevOps or similar role.
• Experience with CI/CD tools such as Jenkins, CircleCI, or GitLab CI/CD.
• Proficiency in infrastructure provisioning tools like Terraform.
• Experience with containerization and orchestration tools (Docker, Kubernetes).
• Strong understanding of cloud services (AWS, Azure, or GCP).
• Ability to troubleshoot complex technical issues and provide solutions.
• Excellent communication skills and a knack for collaboration.

To apply

If you are interested in this position, click Apply Now on LinkedIn or please send your resume to [email protected], quoting “DevOps Engineer (SG)” in the subject header.

Responsibilities

• The candidate will be required to perform electrical testing, test data analysis & automation across SiC power and RF/mmWave GaN devices.
• The candidate hands-on characterization work will encompass from low voltage I-V/C-V to high voltage breakdown, switching performances for SiC, and DC & high-frequency characterizations for RF/mmWave regime.
• The candidate must have hands-on experienced in handling Keysight 4156C and B1500A/Keithley K4200 Device Analyzer, B1505A High Power Device Analyzer with N1265A UHC Fixture and Keysight 4284A/4285A and E4908A LCR Meter independently on their own.
• It will be a plus if the candidate has knowledge of instrumentation control using LabView and some other software like Python, C++ etc .
• The candidate is required to have at least some basic semi-conductor knowledges of semi-conductor devices like P-N Junction, Diodes, CMOS etc.
• The candidate can be exposed to process and device design/simulation with commercial TCAD tools (e.g. Silvaco Victory Process and Victory Device, Sentaurus Process and Device, etc) as part of the learning development and eventually be working on wide bandgap devices team.

Qualifications:

• Bachelors / Masters' degree in Electrical Engineering, Materials Science, Mechanical Engineering, Chemical Engineering, Chemistry, Physics or equivalent.
• At least 5 years of relevant experience. Applicants with relevant study (Electronics, Microelectronics, Computer Engineering, etc) can be considered.
• Strong communication, industry awareness, and problem-solving skills.
• Highly motivated to succeed, a self-starter who is driven and able to work with others effectively to "get things done".
• Industry experience is a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

Responsibilities:

· Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)

· Monitor basic equipment/process errors and perform recovery.

· Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.

· Logistically transport wafer lots between equipment within cleanroom and between worksites.

· Identify and address potential areas for improvements such as cycle time, utilization, and cost.

· Perform chemical change/ top-up for equipment under supervision.

· Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.

· The candidate may be required to perform shift work (Mon-Fri).

Job Requirement:

· Nitec or Diploma in Electrical/Mechanical/Chemical Engineering

· Basic understanding on semiconductor process is preferred

· 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma holders with at least 5 or more years of experience in Mechanical/Electrical/Chemical engineering or equivalent with at least 5 years of relevant experience
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

Responsibilities:

· Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)

· Monitor basic equipment/process errors and perform recovery.

· Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.

· Logistically transport wafer lots between equipment within cleanroom and between worksites.

· Identify and address potential areas for improvements such as cycle time, utilization, and cost.

· Perform chemical change/ top-up for equipment under supervision.

· Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.

· The candidate may be required to perform shift work (Mon-Fri).

Job Requirement:

· Diploma in Electrical/Mechanical/Chemical Engineering

· Basic understanding on semiconductor process is preferred

· 3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities

• Create and execute a strategic sales plan that expands our customer base and extends the company's global reach
• Meet with potential clients and grow long-lasting relationships that address their needs
• Ensure that company sales quotas are met monthly
• Build and promote strong, long-lasting customer relationships by partnering with new/existing clients and understanding their needs

Requirements

• Five or more years of experience in managing sales in a corporate setting
• Proven record of success with the entire sales process, from planning to closing
• Excellent communication, interpersonal, and organizational skills
• Superb leadership ability
• Ability to travel at least 20% of the time
• Proven success rate at levels above sales quota
• Strong business sense and industry expertise

Position Overview

The Autodesk Connected Delivery Team enables internal and external developers to seamlessly integrate Autodesk solutions across Desktop and the Web. We are seeking a motivated Software Engineer in Test to join us in Singapore and be a part of our journey in building the next-generation platform.

You will be part of a team of diverse, smart, and driven engineers. You will be responsible for architecting, designing, building, owning, and testing various components, services, and frameworks, while collaborating with teams across multiple locations.

Responsibilities

• Develop and automate tests for software validation by setting up test environments and designing test plans for desktop products and cloud services
• Align with team goals that connect to the wider organization goals
• Collaborate cross-geo with teams to influence the architecture and design of software and help bring quality into the design of the product

Minimum Qualifications

• BS or MS in Computer Science or related technical field
• 0-2 years of software engineering experience
• Strong background in programming and software testing
• Strong Python/C++ programming skills
• Ability to multi-task between complex projects
• Strong verbal and written communication skills
• Excellent problem-solving abilities
• Enjoys working collaboratively in a team with high trust
• Experience in developing test automation frameworks on Win, Mac and Linux will be a bonus
• Experience with scrum and agile processes will be a bonus
• Familiarity with secure engineering practices will be a bonus
• Technology stack: C++, JavaScript/Python, Selenium

The Ideal Candidate

• You understand what it takes to build and support business critical desktop clients, components, services, and frameworks
• You have a passion for programming, CI/CD, and automation
• You are customer oriented, and drive towards addressing customer pain points
• You believe in taking initiative, ownership and driving towards high standards

• Position : Outdoor Sales Engineer (Industrial Products/Chemical Engineering) - Up to $5000
• Location : West - Tuas (Not required to report to office everyday)
• Working hours : Monday to Friday | 8.30am - 5.30pm
• Salary (commensurate with experience) : Up to $5000 (based on experience & qualifications) +Average of 2 Months Bonus + Claimable Transport Expenses + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Industrial Piping

Main Responsibilities:

• Service existing customers and develop new clients to expand company market share for Industrial product portfolio in a designated region
• To promote and market all Industrial products on agreed quarterly and annual target volume.
• Specifying of company’s product to all relevant clients, consultants, engineering companies, design companies and end user.
• Establishing contact with consultants, contractors, EPCs and project owners
• Managing and interpreting customer requirements ; Negotiating tender and contract terms
• Offering after-sales support services to customers
• Preparing weekly reports and call plan to the general manager
• Supporting marketing by attending trade shows, conferences and other marketing events
• Making technical presentations and demonstrating how a product will meet client needs
• Offer pre-tender technical assistance and product education to the client
• Liaising with other members of the sales team to co-ordinate on projects pursue and win the projects
• Compile lists of prospective customers and projects for use as sales leads.
• Follow up project activities and update project lists.

Requirements:

• Diploma in mechanical or Chemical engineering with at least 1-2 years of industrial sales experience
• Familiarity on project pursue and product specification procedure is a plus
• Experience in water treatment, chemical, Semiconductor and utility segments are an added advantage
• Bilingual in English and Mandarin to communicate with Associates who can only converse in Mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Job Description:

• Responsible for supporting yield improvement, driving, and managing the continuous yield and quality improvement for various devices.
• Responsible for having close interaction with Product Test Engineering team and communicate technical product status to management.
• Responsible for following up with Foundries and test subcontractors to resolve low yield/reliability issues.
• Responsible for monitoring of parameter test and wafer sorting yield with in-depth analysis using various statistical data analysis tools and understand on semiconductor process knowledge, e.g., inline d0, ET, CPK etc.
• Develops failure analysis methodologies as required for assigned projects to enable rapid problem solving with support of internal and external parties.

Requirements:

• Degree/Master’s in Electrical Engineering, Microelectronics or related discipline.
• Strong analytical problem-solving skills.
• Capability of mass data analysis.
• Min 2 years of experience in Product Engineering.
• Salary package will be offered based on working experience.

Job Description:

The candidate needs to develop efficient algorithms for data collection, data cleaning and transforming raw data into usable format for model training. The candidate is expected to be meticulous, have a good sense of data quality and governance, proficient in scripting and keep good documentation. The candidate is expected to collaborate with scientists and engineers and have good team spirit. Strong problem solving, coding, and communications skills are expected.

Job Requirement:

· BSc/MSc in ML, NLP, background in speech, national language understanding

· Proficient programming skills, familiarity with Linux

· Strong analytical and critical thinking skills, good team player with good communication and interpersonal skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

The candidate needs to implement deep learning algorithms and propose novel solutions that optimize the computational efficiency for training and inference of foundation model. The candidate is expected to work as a team in problem analysis, design solutioning, conduct evaluation to build state-of-the-art foundational models and develop use cases. Strong problem solving, coding, and communications skills are expected.

Job Requirement:

· BSc/MSc in ML, NLP, background in speech, natural language understanding, multi-modal AI

· Proficient programming skills, familiarity with Linux is a must

· Familiar with different deep learning and LLM training frameworks

· Strong analytical and critical thinking skills, good team player with good communication and interpersonal skills

· Knowledge in ML and Deep learning algorithms, and advanced NLP techniques are necessary

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

The candidate needs to implement deep learning algorithms and propose novel solutions that optimize the computational efficiency for training and inference of foundation model. The candidate is expected to work as a team in problem analysis, design solutioning, conduct evaluation to build state-of-the-art foundational models and develop use cases. Strong problem solving, coding, and communications skills are expected.

Job Requirement:

· BSc/MSc in ML, NLP, background in speech, natural language understanding, multi-modal AI with minimum 8 years of relevant experience

· Proficient programming skills, familiarity with Linux is a must

· Familiar with different deep learning and LLM training frameworks

· Strong analytical and critical thinking skills, good team player with good communication and interpersonal skills

· Knowledge in ML and Deep learning algorithms, and advanced NLP techniques are necessary

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

MODEC Is looking for a Topsides Engineering Coordinator, to work from our offices in Singapore. We are looking for somebody who can apply Project knowledge, Engineering knowledge and experience to coordinate the engineering and design of a project and support the fabrication, installation, commissioning and startup of facilities and equipment/ utilities interface associated with the conversion and outfitting of FSO / FPSO tankers, conversion of MOPU jack-ups for production operations or deep water TLP projects. The incumbent shall be capable of deputizing for the Topsides Engineering Manager in case of the latter's absence

Qualifications

Bachelor's degree in any engineering discipline with 15 years of relevant experience or Masters' degree in any engineering discipline with minimum 13 years of relevant experience.
Experience as Topsides Engineering Coordinator with at least one FPSO project in the EPCI phase.
Specialist knowledge of at least one MODEC or related project line or basic knowledge of multiple technologies, projects and applications. Working knowledge of competing and alternative technologies.
Have adequate knowledge of design codes and regulatory requirements.
Familiar in use of Software, Database systems related to Engineering functions.

Responsibilities

- Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations and construction team for preparation of deliverables meeting the quality and safety requirements.

- Coordinate with the engineering disciplines to set up Engineering and Design systems, Engineering Schedule, Master document Register (MDR), Procurement Schedule

- Coordinate with the engineering disciplines to issue all deliverables on schedule

- Work with the project planner to develop Level 3 and Level 4 engineering schedules

- Implement engineering change management for the Topsides engineering post design freeze in all disciplines including communication, tracking and approval by the relevant stakeholders

- Coordinate with Engineering disciplines to respond and closeout of Class Society comments, Client Technical Queries, Site Queries and Operation Queries for topsides

- Coordinate with the Detailed Engineering subcontractors and Third Party specialists for Topsides

- Support Topsides Engineering Manager in forecasting and mobilizing engineering and design resources for Topsides Engineering

- Ensure compliance with Company’s Standards and Procedures with specific attention to change management and deviation approval process

- Independently develop solutions to non-recurring problems by analyzing, interpreting and evaluating various precedents and data Anticipate potential problems and take preventive actions

- Support Engineering Manager project management in review, risk assessment, and close-out of engineering issues

- To be adequately familiar with the key activities and needs of all the engineering disciplines and how these activities interact and are sequenced, and the implications is a major challenge

- To be able to deal efficiently, professionally and tactfully with numerous stakeholders who may have different focus and priorities, both internal and external is a challenge

• Position : Solar Power Engineer (PV installation/Fieldbus/Proficient in PVSyst) - Up to $7000 + Bonus
• Working hours : 5.5 Days | 8.30am - 5.30pm | Monday - Friday | Saturday 8.30am to 12.30pm
• Location: Project Site - TBC
• Salary (commensurate with experience) : Up to $7000 + Performance Bonus + Transport Allowance + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Construction & Engineering

Main Responsibilities:

• Plan and monitor project progress to ensure timely delivery
• Liaise with contractors, consultant, design team, client etc
• Manage project resources availability to meet project needs e.g manpower, build components, equipment
• Monitor and control project cost
• Conduct risk assessment for projects
• Arrange Operation & Maintenance work as required

Requirements:

• Diploma/Degree in Solar/ Renewable/Electrical engineering or related field
• Minimum 1 to 4 years of working experience for Junior role
• Minimum 5 years of working experience for Senior Role
• Good knowledge of solar power system design
• Experience in solar PV installation.
• Proficient in PVSyst/CAD/MS Office (Project/Word), PowerPoint, etc
• Familiar with fieldbus and other industrial communication protocol including Modbus, TCP/IP etc

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Responsibilities

• Prepare QA/QC procedures, Project Quality Plan, Method Statement, checklist and inspection form with project team members
• Monitor daily site QA/QC activities, ensure that QA/QC procedures, Method Statement and Project Quality Plan is adhered by the project team members
• Conduct raw material inspection, site inspection, testing, post installation check out (PICO) and issue QA/QC inspection report
• Monitor and ensure all the tools and equipment are calibrated when it is due and update in Tools and Equipment List FY XXXX
• Investigate the cause of non-conformance with project team members and recommend corrective / preventive actions, if require to prevent recurrence
• Ensure that all audit findings on non-conformance findings / reports and punch lists are properly addressed and closed together with the client
• Ensure proper documentation and filing of QA/QC records
• Conduct internal quality audit based on project quality plan and client requirement
• Attend client QA/QC meeting
• Assist in preparation of Final Documentations for handover to clients

Qualifications and Work Experience

• Diploma in relevant engineering
• Accredited ISO 9001 internal auditor certificate is an advantage
• Good QA/QC knowledge on electrical, signal and communication inspection and testing
• Good knowledge on interpretation of electrical drawings
• Good interpersonal, analytical and problem-solving skill
• Able to work independently
• Good oral and written communication skills
• Good Microsoft office knowledge and skills