• Undertake design for road and drainage, including long section and cross section of permanent and temporary stages
• Study and propose utility diversion for permanent and temporary stages
• Assist in developing the specifications and tender documents, cost estimates, calling tenders and tender evaluation.
• Undertake design development, prepare technical reports and supervision of roads and utilities works for infrastructure projects.
• Communicate with clients, sub consultants, approving agencies, etc, for purposes of obtaining information and approvals.

Job Description

• Act as a Resident Engineer for Bored Tunnel construction
• Supervise construction of MRT Tunnel using slurry TBM
• Supervise and ensure strict quality control
• Review Technical Documents
• Keep record of all site activities and prepare daily report
• Supervise any repair works
• Witness & verify any field test carried out on site;
• Monitor and report progress of the works on site;
• Manage a team of RTOs

Requirements

• Registered with JAC of IES/ACES as an accredited Resident Engineer (Tunnel)
• Possess a Degree in Civil Engineering or equivalent
• Minimum 4 years of relevant experience out of which at least 2 years in supervising Slurry tunneling works in Bukit Timah formation .

Job Description

• Supervise construction of Diaphragm Wall
• Supervise ground improvement works
• Supervise and ensure strict quality control
• Keep record of all site activities and prepare daily site report
• Supervise any repair works
• Monitor and report progress of the works on site;

Requirements

• Possess a Degree in Civil Engineering or equivalent
• Relevant experience in the construction of ground improvement works, strutting works, Excavation, Secant Bored Pile, Diaphragm Wall
• Minimum 6 years of relevant experience in supervising deep excavation projects or underground MRT projects.

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

We are seeking an experienced Firmware Engineer to join our team to design, develop, and optimize firmware for embedded systems. The ideal candidate will have strong experience working with FPGA, ARM processors, and embedded software development using C, C++, and Python Scripting Skills. You will implement cyber security software / firmware solutions on ARM/FPGA based embedded systems.

Key Responsibilities:

●      Develop and maintain firmware for embedded systems, specifically targeting FPGA and ARM-based processors.

●      Design and implement real-time embedded systems using C, C++, and Python.

●      Write and optimize device drivers, board support packages (BSP), and low-level hardware interfaces.

●      Collaborate with hardware engineers to define system architecture and debug hardware/firmware integration issues.

●      Implement, simulate, and test FPGA-based firmware using tools like Verilog, VHDL, or SystemVerilog.

●      Work on bootloaders, and system diagnostics.

●      Perform unit testing and integration testing for firmware, ensuring system performance and reliability.

●      Contribute to code reviews, technical documentation, and design reviews.

●      Troubleshoot and resolve firmware issues, optimizing system performance.

●      Integrate and deploy AI/ML models (e.g., neural networks) into embedded devices for tasks such as anomaly detection, or predictive analytics.

Qualifications:

●      Bachelor’s or Master’s degree in Electrical Engineering, Computer Science, or a related field.

●      3+ years of experience in firmware or embedded software development.

●      Strong proficiency in C, C++, and Python.

●      Experience with FPGA design and implementation using Verilog, VHDL, or similar hardware description languages.

●      Hands-on experience with ARM processors (Cortex-A, Cortex-R, or Cortex-M series) and associated toolchains.

●      Familiarity with embedded Linux and/or RTOS environments.

●      Experience with hardware debugging tools such as JTAG debuggers.

●      Strong understanding of real-time embedded systems, including hardware/software interfaces, peripherals (PCIE, UART, SPI, I2C), and memory management.

●      Excellent problem-solving and communication skills.

Preferred Qualifications:

●      Experience with PCIe, DDR, or high-speed interfaces.

●      Experience with scripting languages like Python for automating testing and development processes.

●      Knowledge of networking protocols and interfacing.

●      Familiarity with secure boot, encryption, and other security measures in embedded systems.

●      Experience with AI/ML frameworks such as TensorFlow Lite, PyTorch, or Keras, and knowledge of how to optimize them for embedded systems.

●      Hands-on experience with neural network architectures (CNNs, RNNs, DNNs) and deploying them on resource-constrained environments.

• Performance Bonus: Our company recognizes and rewards high performance with competitive bonuses tied to your results.
• Restricted Stock Units (RSUs): We issue RSUs to contributors, offering you a stake in the company's success and aligning your interests with our long-term growth.
• Career Advancement Opportunities: We provide clear career progression pathways and support your development to help you reach your full potential.
• Collaborative Work Environment: Join a team that values innovation, collaboration, and continuous improvement.

Job Description

• Lead and manage new building construction projects, ensuring they are completed on time, within budget, and to specifications
• Develop and implement maintenance programs for existing facilities, ensuring all systems are functioning efficiently and safely
• Provide technical advice to user departments, manage service partners and contractors
• Coordinate fire safety and Green Mark initiatives, investigate safety incidents, and ensure adherence to relevant regulations
• Perform design calculations, prepare engineering plans, and develop maintenance programs to improve facility performance
• Maintain accurate records of maintenance activities and project progress, and prepare reports for management review

Job Requirements

• Degree holder in Electrical Engineering
• Preferably 2-3 years of relevant experience will be advantageous

Interested applicants, kindly furnish us with your detailed resume in MS Words format and click "Apply Now" button.

**We regret to inform only shortlisted candidates will be notified. Applicants who do not possess necessary experience or qualification will still be considered on individual merits and may be contacted for other opportunities.**

**JobStudio will not solicit any money, request to use your bank account for business or request you to transfer any monies to any parties. Please be aware of scams impersonating JobStudio and our employees. You may call our office directly for verification. We will not be liable for any loss arising from scams.**

JOBSTUDIO PTE LTD

EA License No: 10C4754

EA Personnel: Stephanie Toh

EA Personnel Reg No: R1217674

Job Summary:

We are looking for an Infrastructure Engineer - Systems to oversee the administration and security monitoring of our Microsoft Azure environment. The role will involve hands-on day-to-day operational support, security monitoring, incident management, and vulnerability management. The ideal candidate will have experience with Microsoft Azure and a good understanding of security tools, scripting, and automation.

Key Responsibilities:

• Azure Security Monitoring:

Perform daily monitoring of Azure security alerts, DSM alerts, and any custom alerts related to security. Proactively identify and address security risks.

• System Administration & Support:

o Manage and support Microsoft Cloud Defender, Logs Analytics Workspace, Network Security Groups, and Azure Trend Micro Cloud One.

o Ensure smooth operations of the Azure environment, responding to alerts and resolving issues promptly.

• Incident Management:

Handle security incidents by raising tickets with Microsoft and Trend Micro to resolve issues. Monitor progress and ensure timely resolution.

• Software Upgrades:

Perform upgrades on TrendMicro Cloud One to address security vulnerabilities and enhance system performance.

• Vulnerability Management:

Assist in vulnerability assessments within the GCC environment and recommend mitigation actions to the System Officer-in-Charge (OIC) and infrastructure teams.

• Proactive Investigation:

Conduct queries on Log Analytics and support cyber investigations as per security needs.

• Automation & Scripting:

Utilize basic scripting skills in az cli, PowerShell, KQL, and Logic Apps to automate routine tasks and enhance security measures.

Skills and Qualifications:

• 3+ years of experience working with Microsoft Azure in an infrastructure or security operations role.

• Familiarity with Azure security tools including Cloud Defender, Logs Analytics Workspace, Network Security Groups, and Trend Micro Cloud One.

• Strong incident management and troubleshooting skills, with experience raising tickets and interacting with third-party vendors.

• Experience in vulnerability management and proactive security monitoring.

• Basic knowledge of scripting with az cli, PowerShell, KQL, and Logic Apps for automation.

• Solid understanding of cybersecurity best practices and experience conducting proactive security investigations.

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to fab issues by communicating with other engineers and participating in escalation conference calls. Verifies operational quality of system equipment unassisted . Assists senior engineers as needed.
• Follows all checklists and procedures and ensures correct Revs of procedures and schematics are available prior to performing work.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve recurring technical problem. Demonstrates consistent ability to execute escalation plan. Able to resolve Day-Day issues. Exposure to systemic issue resolution. Able to support the preparation and delivery of technical issues to internal and external stakeholders. Knowledge in fundamental theories. Minimum aid needed to read circuit diagrams. Single primary product and platform. Executes projects to reduce costs and increase uptime.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers (Testing). Has the ability to diagnose and resolve technical problems (Corrective maintenance). Uses training and experience to identify some process, software or hardware related system problems (Predictive maintains).
• Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management. Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge:

• Has established skills to perform a range of day-to-day activities.

Business Expertise:

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline.
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area.

Leadership:

• Has no supervisory responsibilities; manages own workload.

Problem Solving:

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options.

Impact:

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance.

Interpersonal Skills:

• Uses communication skills to exchange information.

Key Responsibilities

• Develop and execute complex projects that have a substantial mix of electrical, mechanical, physics, algorithms and software design; attend design reviews and provide input to meet market requirement specifications (MRS) and hardware/software specifications. Ensure designs meet market requirement specifications (MRS). Coordinate with project marketing and management to understand system requirements. Be able to chair architecture brainstorming meetings and drive the systems process to down select to a final architecture of a top-level system.
• Participate in the design, development, and testing of radio-frequency components for semiconductor equipment, which includes high-power generators (up to 6 kW or more), matching networks, filters, or other tuning elements, with frequencies ranging from 300 kHz to 60 MHz.
• Write detailed specifications that cover all aspects of subsystem modules including interfaces to the product by using systems analysis to create a diagram. Create concepts for complex architectural design approaches. Lead team evaluations of architectures to provide recommendation for best system solution approach.
• Ability to fabricate or modify RF components to change their performance or enable access for instrumentation.
• Ability to instrument, characterize and troubleshoot RF sub-systems within larger semiconductor tool environment.
• Problem identification and troubleshooting a wide range of difficult, complex engineering problems in field of technical expertise, including serviceability and manufacturability.
• Support System Integration during the assembly and final testing of new product designs.
• Interface with other groups to workout design, systems architecture development and integration issues.
• Define all equipment interfaces and systems architecture and ensure they are up to date and documented.
• Work with vendors to develop design requirements and ensure delivery of parts that meet specifications.

Education Qualifications

• PhD/ Master/ Bachelor’s degree in Electrical Engineering, Electronics and Communication, Physics or related engineering field with a 1-3 years of relevant RF experience

Functional Knowledge

• Understand principles and operation of network analyzers, oscilloscopes, power meters, directional couplers, and other radio-frequency test equipment
• Knowledge of circuit theory and ability to develop analytical models of RF components
• Problem-solving and troubleshooting skills

Interpersonal Skills

• Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of internal and external stakeholders
• Self-starting individual, proactive and resourceful

Work Location

• Science Park II

Established in 2017, QCP is one of the first digital asset trading firms in Singapore, with a vision to partner the next generation of investors to unlock institutional opportunities in digital assets.

QCP brings to clients deep expertise gained from thriving through multiple market cycles. A global market maker in digital asset derivatives with a vast network of liquidity providers and counterparties, we are shaping the future of digital asset markets through greater access and efficiency.

We offer a range of tailored derivatives and spot trading as well as structured solutions to institutional, professional and accredited investors. We also provide 24/7 liquidity across various markets in partnership with various exchanges and platforms.

QCP is headquartered in Singapore and is supported by a strong team of professionals in trading, business development, operations, risk and compliance teams.

Our in-house publications track the constantly evolving state of digital assets and markets, and can be accessed on our Telegram (t.me/QCPbroadcast), website (qcpgroup.com), Twitter (@qcpgroup) and LinkedIn.

Responsibilities

As a Back End Engineer, you will be instrumental in designing and building robust middle office and back office systems that underpin our trading and operational infrastructure. This role offers the unique opportunity to work on a variety of projects.

• Actively participate in all phases of the SDLC, including designing, coding, testing, deploying and maintaining distributed enterprise systems
• Write clean, efficient, and well-documented code for enhancing our trading, operations and risk management capabilities
• Build tools, reports and data feeds to meet evolving business requirements
• Collaborate across teams to support diverse business and operational objectives
• Uphold high standards of software quality and efficiency, while ensuring operational resilience
• Work closely with business line heads and front office teams throughout system implementation and ongoing maintenance

• Bachelor’s degree in Computer Science, Engineering, or a related field
• 0 to 2 years of programming experience; fresh graduates are welcome
• Proficiency in at least one programming language (Java, Python, C# etc.), demonstrated through projects, internships or work experience
• Experience with SQL database technologies (MySQL/PostgreSQL/Oracle etc.) is beneficial
• Experience with Spring Boot is beneficial but not a requisite
• Strong communication skills and the ability to work collaboratively in a team environment
• A proactive problem-solving mindset and a keen interest in continuous learning

The Environment We Offer

As a growing firm with a tightly-knit team, we respect and listen to all our employees. You will get the chance to make an impact by having your voice heard by everyone, including the management.

Our employees enjoy a high level of autonomy at work. We focus on substance, not form - as long as you can perform, you will be recognized and rewarded. We are also dedicated to supporting our staff and ensuring they develop holistically to maximize their potential in the long- term.

We also provide flexible working arrangement as required and a casual and fun environment to boot!

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to fab issues by communicating with other engineers and participating in escalation conference calls. Verifies operational quality of system equipment unassisted . Assists senior engineers as needed.
• Follows all checklists and procedures and ensures correct Revs of procedures and schematics are available prior to performing work.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve recurring technical problem. Demonstrates consistent ability to execute escalation plan. Able to resolve Day-Day issues. Exposure to systemic issue resolution. Able to support the preparation and delivery of technical issues to internal and external stakeholders. Knowledge in fundamental theories. Minimum aid needed to read circuit diagrams. Single primary product and platform. Executes projects to reduce costs and increase uptime.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers (Testing). Has the ability to diagnose and resolve technical problems (Corrective maintenance). Uses training and experience to identify some process, software or hardware related system problems (Predictive maintains).
• Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management. Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge:

• Has established skills to perform a range of day-to-day activities.

Business Expertise:

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline.
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area.

Leadership:

• Has no supervisory responsibilities; manages own workload.

Problem Solving:

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options.

Impact:

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance.

Interpersonal Skills:

• Uses communication skills to exchange information.

Job Description

Key Responsibilities

• Design or modify electrical/electronic engineering assemblies, layouts/schematics and/or detailed drawings/specifications of difficult scope
• Problem identification and troubleshooting a variety of complex electrical problems with limited supervision
• Define, coordinate, perform and generate engineering test reports with limited supervision
• Technically lead and/or executes engineering projects, including development of key suppliers
• Implements concepts for variety of complex product issues and electrical solutions of difficult scope
• Generates electrical product specifications and reviews engineering documentation
• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Interfaces with internal and external customers regarding complex electrical issues for specific projects
• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Educational Qualifications

• PhD/ Master/ Bachelor’s degree in Electrical Engineering, Electronics and Communication, Mechanical Engineering or related engineering field

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Hands-on experience in electrical schematic diagram, PCB/ Low voltage circuit design for power and control
• Problem-solving and troubleshooting skills

Interpersonal Skills

• Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of internal and external stakeholders
• Self-starting individual, proactive and resourceful
• Good communication and interpersonal skills

Work Location

• Science Park II

Job Responsibilities:

• General encapsulation and optimization of the underlying framework; ensure the stability and efficiency of the underlying framework SDK, making it cross-platform and optimized for specific platforms.
• Transformation of algorithm application achievements; conversion of deep learning-related algorithm achievements, including detection, classification, segmentation, and other algorithms implemented based on the deep learning underlying SDK.
• Responsible for the creation and optimization of engineering algorithm strategies; design and implementation of engineering algorithm strategies for industry businesses based on the algorithm SDK; optimize engineering algorithm strategies for different application scenarios.

Minimum Qualifications:

• Bachelor's degree or above in computer science, electronics, or related fields.
• Proficiency in C/C++ development, solid programming skills, familiarity with common data structures and algorithms, object-oriented programming, and common architecture and design patterns.

Preferred Qualifications:

• Master's degree or equivalent experience in industry with in computer science, electronics, or related fields.
• Preference for those familiar with GPU programming, RTOS (NuttX, RT-Thread) and deep learning-related knowledge, image processing algorithms.
• Those with Android or iOS development experience are preferred.

Essential Skills:

• Excellent networking and interpersonal skills.
• Problem-solving, and analytical thinking.
• Highly organized, diligent with great attention to detail.
• Active listener, able to interpret and playback stakeholder requirements.
• Highly driven and able to work individually and as part of a team.

We regret to inform you that only shortlisted candidates will be contacted.

Job Description

• To act as Resident Engineer for underground MRT station
• Supervise and ensure strict quality control
• Review Technical Documents
• Keep record of all site activities and prepare daily report
• Supervise any repair works
• Witness & verify any field test carried out on site;
• Monitor and report progress of the works on site;
• Manage a team of RTOs

Requirements

• Registered with JAC of IES/ACES as an accredited Resident Engineer
• Possess a Degree in Civil Engineering or equivalent
• Minimum 4 years of relevant experience out of which at least two years in supervising underground MRT station

Job Description

Capabilities Development

*Lead the development and implementation of Group and partners OEMs’ (Original Equipment Manufacturers) new repair capabilities and report to the Industrialization Manager.

* Analyze technical data, gather market data, investment requirements to perform feasibility studies and Return on Investment.

* Perform self-assessments, engineering studies, build up justification file.

* Liaise with Quality for smooth airworthiness application for testing & repair capability integration.

*Liaise with the OEMs to clarify the requirements.

*Develop, source new equipment, consumables and chemicals and support investments linked to testing & repair policies.

* Drive the progress of the tasks, pilot projects’ milestones review with various stakeholders, report advancement, track investments and expenses, monitor contractors and suppliers, devise maintenance plans.

* Lead operations trainings and validation tests.

* Establish calibration requirements.

* Follow-up the testing & repair ramp-up with the workshops and support the Entry Into Service for new programs.

* Report to management. Flow down relevant and timely information.

Support & maintain new capabilities

* Coordinate with Product Support Engineer (PSE), and Operations personal to ensure optimal customer support.

* Assist the lead equipment maintenance when required.

* Implement systems or components modifications following notification of change related to CMM, Service Bulletins (SB) or Service Information Letters (SIL).

* Support workshop implementation of new requirements upon fleet upgrade and retrofit campaigns.

* Develop the Integrated Logistic Support at SEDSA levels.

* Help sourcing for material, suppliers, 3rd parties, alternatives.

* Review calibration requirements.

* Take a pro-active approach, initiate creative solutions to maintenance issues and assist the workshops in implementing best practices, Continuous Improvement, LEAN operations, cost

reductions and applying lessons-learned from previous or bench-marked experiences.

* Ensure that communication between all stakeholders, Head Quarter, OEMs, Workshops, Quality, Sales, Continuous Improvement, Supply Chain, Customers, Suppliers, is optimum.

* Ensure SEDSA contract terms & conditions are understood & satisfied. Pro-actively manage contractual issues with 3rd Parties and suppliers.

* Report to management. Flow down relevant and timely information.

Profile & Soft Skills

* Be rigorous and organized, able to handle multi-tasking and priorities.

* At ease to report and present progress through regular reviews with the management.

* Develop excellent relationships across multiple organizations & with all levels of workshops and other Company personnel.

* Safeguard interest of SAFRAN Electronics & Defense Services Asia (SEDSA) and partners OEMs.

Health, Safety & Environment

* Comply with all health, safety and environment (HSE) regulations as prescribed by law and company’s policies.

* Actively participate and contribute to HSE initiatives & Corporate HSE programs and in HSE risk communications & mitigations.

* Actively participate and contribute to 5S initiatives.

Continuous Improvement and Innovation

* Lead by example the Continuous Improvement and Innovation initiatives in the company.

* Implement innovations.

* Pilot Company Lean and Improvement projects. Review progress, deliverables and gains for key innovations.

* Be a driving force in the Participative Innovation, ONE SAFRAN and Green Belts Improvement

* Spearhead the QRQC, SQCDPI, 5S, Root Cause Analysis, ONE SAFRAN methodologies to be best in class.

* Perform any other duties as assigned.

Experience and Qualifications:

a) Degree in Mechanical/Electrical/Aeronautical Engineering

b) At least 3 years of Aviation Engineering experience, Technical Support Aircraft Maintenance and Repair Operations, in OEM or MRO environment

c) Proficient in product support and trouble shooting procedures

d) Hands-on experience on design and wiring of electronics test fixtures.

e) Experience in OEM technical support, or related MRO operations/engineering

f) Must be familiar with technical support environment, processes, and manuals used for aircraft maintenance. Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous

g) Effective Project Management and interpersonal skills

h) Experience in calibration requirements and procedures

i) Proficient with Microsoft software applications

j) Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous

k) Sound knowledge of quality systems such as ISO9000 and AS9110

l) Excellent attitude, good team player, motivated, driven, committed, reliable. Take ownership of the projects

m) Ability to multi task in a dynamic environment

n) Excellent communications skills. Well versed in written and spoken English

o) Able to think ahead, process data, make decisions and solve problems.

Job Description

• To act as Resident Technical Officer for underground MRT Project
• Supervise construction of underground MRT Station
• Supervise and ensure strict quality control
• Keep record of all site activities and prepare daily site report
• Supervise any repair works
• Witness & verify any field test carried out on site;
• Monitor and report progress of the works on site;
• Registered with JAC of IES/ACES

Requirements

• Registered with JAC of IES/ACES as an accredited Resident Technical Officer
• Possess a Degree in Civil Engineering or equivalent
• Minimum 3 years of relevant experience in superising deep excavation projects or underground MRT projects.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a SOC Engineer (Shift) to join us in our mission to enhance Singapore’s competitiveness as a trusted ICT hub for citizens and businesses. This role will be a 2-year rolling contract employment.

A brief summary of your job responsibility:

• Act as Incident first responder, reviewing and verifying system alerts
• Perform security incident discovery, triage, and remediation plan coordination.
• Daily analysis of SIEM events to identify malicious events and define use-cases to alert the operations team on threat events.
• Identified and onboarded assets into SIEM with all necessary use cases, dashboards, and reports.
• Monitoring of security procedures and practices; recommend optimizations and improvements when gaps are identified
• Provide support on IDS, SIEM, vulnerability management systems (VMS) and advanced endpoint detection/prevention.
• Escalate security incidents using established policies and procedures
• Any other ad-hoc duties as assigned by the SOC Manager

To succeed in this role, you will ideally have:

• Experience with analysis of server, network and web security events.
• Working experience with SIEM and VMS support tools.
• Security certifications like SSCP and CISSP will be an added advantage
• ITILV4 foundation certified is preferred.
• Strong interpersonal communication skills, verbal and written.
• A team player and can also work on own initiative.
• Willing to work on 12-hour shift pattern.

Join us and discover a challenging and rewarding career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience. Interested applicants, please click "Apply Now"

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

• Annual Leave Benefits with additional perks such as Family Care and Birthday Leave.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.
• Contract Staff enjoys the same benefits as Permanent Employees.

The Staff Systems Engineer in the Developer Experience group will be responsible for engineering and supporting various technologies and tools to provide best Developer experience for Visa’s Development community.  Key responsibilities include:

• Engineer vendor products to Visa’s environment by installing, upgrading, patching, and maintaining Developer tools. 
• Interface with internal departments such as Cybersecurity and Governance groups to ensure controls are established maintained and complied for all Developer tools.
• Interact with vendors and provide necessary feedback to tailor vendor products to meet Visa’s needs.
• Develop standards and enforce governance across CICD practices
• Create and maintain templates and catalogs of pipelines and manage inner sourcing processes
• Perform regular housekeeping on tools to provide high standards of application stability and reliability.
• Support ongoing Developer Tools projects and provide technical input as needed.
• Support complex technical issues in an interop production environment.
• Participate in L3 on-call support rotation.

Tools Include:

• Project management
• Source code management.
• Build and Deployment management.
• Test and Quality tools.
• Cloud services for DevOps   
• Developer productivity and analytics tools.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

The Sr. Systems Engineer in the Developer Experience group will be responsible for engineering and supporting various technologies and tools to provide best Developer experience for Visa’s Development community.  Key responsibilities include:

• Engineer vendor products to Visa’s environment by installing, upgrading, patching, and maintaining Developer tools. 
• Interface with internal departments such as Cybersecurity and Governance groups to ensure controls are established maintained and complied for all Developer tools.
• Interact with vendors and provide necessary feedback to tailor vendor products to meet Visa’s needs.
• Develop standards and enforce governance across CICD practices
• Create and maintain templates and catalogs of pipelines and manage inner sourcing processes
• Perform regular housekeeping on tools to provide high standards of application stability and reliability.
• Support ongoing Developer Tools projects and provide technical input as needed.
• Support complex technical issues in an interop production environment.
• Participate in L3 on-call support rotation.

Tools Include:

• Project management
• Source code management.
• Build and Deployment management.
• Test and Quality tools.
• Cloud services for DevOps   
• Developer productivity and analytics tools.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Job Description

The successful candidate will join the Maintenance Planning & Cost Control Department in SIA Engineering Division. You will be part of the team that oversees Maintenance Planning.

Key Responsibilities include:

• Plan and implement Boeing / Airbus aircraft maintenance programs and ensuring all mandatory airworthiness tasks meet regulatory and operational requirements.

• Coordinate with SIAEC (BM/LM) to carry out aircraft maintenance program tasks timely and efficiently.

• Update the Line Maintenance Tracking Chart (LMTC) daily for the issuance of work and completion status.

• Ensure that spares are available at time of task issuance.

• Support necessary meetings which require task status updates. E.g. Airworthiness Directive Special Inspection (ADSI) weekly meeting, Hardlife meeting.

• Ensure that accurate information is communicated and there is a formal channel (minute meeting) for escalation if necessary.

• To conduct sample review of the reports and declarations sent by service providers.

• Ensure accuracy of the reports and declarations sent by service providers and processes are followed.

• Ensure that the standards of work packages meet the requirements of Air Operator’s Certificate (AOC) and processes are followed.

• Support necessary projects/tasks. E.g. Aircraft pre-service modification (PSM) packages.

Requirements:

• A diploma in any discipline.

• Must have knowledge and relevant experience of Maintenance Planning administration and procedures.

• Well-versed with aircraft maintenance documents such as MPD, Approved Maintenance Schedule (AMS), Aircraft Maintenance Manual (AMM), Illustrated Part Catalogue (IPC), etc. to understand task card requirement. Knowledge of the different aircraft systems and familiarity with aircraft diagnostic tools such as Aircraft Health Monitoring (AHM) and Airman would be an advantage.

• Must be familiar with SAP & MS Office suite of products

• Good verbal and written communication skills.

• Must be motivated, driven and be a team player and able to work independently.

Technical / Adminstrative Duties

• Minimum 5 years' relevant experience in ACMV Project design and build for various type of buildings, including cleanroom and bio-lab projects.
• Documenting and certificating all work carried out to meet our contractual and statutory obligations
• Identifying and resolving remedial requirements on all systems
• Quoting and undertaking project work as required by the client

Requirements:

• Degree or Diploma in Mechanical / Electrical / Building Services Engineering or Equivalent;
• Experience in ACMV / Mechanical / Electrical / Building Services Project and Maintenance work.
• Experience in both industrial and commercial air-cons
• Ability to work independently and manage multiple projects
• Possess good interpersonal communication and presentation skills

Job Objectives

Design and develop both optoelectronics devices and integrated photonics sub-system platforms. Devices includes but not limited to SOA, gain chips, FP lasers, DFB lasers (CW and DML) and SLEDs. Photonics integrated platforms include but not limited to photonics integrated circuits, Silicon-based integrated platforms, standard/custom packaged modules, as well as optoelectronics sub-systems (i.e. includes both optical and electronics sub-modules) to meet design goals and requirements.

Duties and Responsibilities

• Perform simulation of optoelectronic devices (CrossLight, ALDS, Optiwave), optical ray tracing (Zemax, Optalix), thermal (Solidworks) and electrical (5Spice) properties of optoelectronics devices
• Analysis of optoelectronics device epi growth, participate in wafer fabrication process integration, mask design integration, device functionality and reliability performance characterization and test results.
• With reference to state-of-art competitors, simulated performance and data-mining internal test-results database, you will refine the design, fabrication specifications, and simulation model and parameters to optimize fit between design and measured outcomes.
• Report generation of design and simulation outcome with support of experimental data, where available
• Build up database of optoelectronics device design white papers, and management of all design documentation repository
• Responsible for leading/co-leading programs with several major global players in the development of photonic integration solutions to support the Silicon Photonics platform for datacom and sensing applications.

1. Development will be beyond simplex monolithic integration with regrowth for spot size converters and array devices, towards multiple functionality PICs incorporating active devices of lasers, modulators and detectors with passive devices of waveguides, polarizers, MMI splitters and optical filters.
2. Development of multiple functionality PICs designed to be compatible to Silicon Photonics to form a larger scale integrated System-on-a-Chip component.

• Lead and manage qualification and transfer of product to manufacturing upon development completion.
• All other reasonable duties, as assigned

Qualification Guidelines

Minimum Education

Masters (in semiconductor based light emitting optoelectronics preferred)

Minimum Experience

Minimum 10 years’ working experience with technical background in optoelectronics and wafer fab processes in optical laser component, photonics device system and sub-system

Proven working experience in optoelectronics design and development and program/project management in the photonics manufacturing industry