Total 75,343 Engineering job vacancies in singapore

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler), Photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Job Responsibilities:

• Team up with chemists to lead a team of lab analysts and technician in executing daily laboratory operations, ensuring compliance with accreditation standards and quality system implementation.
• Identify and drive initiatives to enhance laboratory operational efficiency and productivity.
• Manage laboratory inventory and equipment, including consumables/spare-parts inventory, equipment calibration, troubleshooting, and maintenance planning, to meet quality and operational requirements consistently.
• Play a key role in product management of specialty materials for semiconductor wafer fabrication and related industries.
• Provide support in new product development processes (R&D), analytical metrology, and quality assurance for all products.
• Collaborate with other departments on continuous improvement projects to achieve business objectives.
• Foster and maintain strong customer relationships, offering product expertise, providing technical support for new product developments and addressing technical emergencies.
• Cultivate and strengthen relationships with external parties, including research collaboration partners and material suppliers, for existing and new product development.
• Perform Quality Control (QC) responsibilities, including conducting quality tests, inspections, and analyses to ensure product integrity and compliance with standards and specifications.
• Investigate deviations, out-of-specification results, and quality-related issues, and implement corrective and preventive actions (CAPAs) as necessary.
• Develop and validate analytical methods for the testing of chemical compounds, ensuring accuracy, precision, and reliability.
• Maintain and calibrate laboratory instruments and equipment, ensuring they are in proper working condition for accurate testing and analysis.

Job Requirements:

• PhD or minimum Master's Degree in Chemistry or a related field.
• Working experience or significant exposure to specialty chemicals or semiconductor wafer fab supplier environments is considered an added advantage.
• Strong hands-on instrumentation experience such as ICP/MS, GC/MS, UV-Vis, GC/FID/TCD, IC, HPLC, GFAA, ICP/OES, NMR, and other measurement tools.
• Excellent written and spoken communication skills.
• Hardworking, able to multi-task, and willing to work long hours.
• Excellent presentation skills.
• Team player with excellent interpersonal skills and a strong sense of ownership.
• Ability to work under pressure, prioritize workload, be systematic, and make sound decisions in a fast-paced environment.
• Willingness to travel when required.

Job Description

1. Project coordination and management including planning, scheduling, execution and handling project and coordinating with sub-contractor.

2. Liaises and communicates with client on project status, progress and variation order.

3. Ensuring the project is administered and executed to the satisfaction of the Client in accordance to contractual agreements and safety standards and compliant to the company policies and procedures.

4. Maintain good rapport with customer by providing relevant technical support.

5. General administration support to project team on filing management and ensure all documentation is maintained orderly for each project including proper documenting and reporting of project deliverables.

6. Provide after sales service and technical support on existing customers and develop new customers to expand customer base.

7. Any other duties/task as required by the job and/or organisation where required.

Qualifications

1. Good logical thinking and attention to details.

2. Strong sense of responsibility, confidence, initiative and commitment.

3. Ability to work independently with minimum supervision

4. Good communication skills both oral and written to liaise with people from all levels

5. Knowledge on Renovation Works, Interior design, A&A works and basic M&E

Responsibilities:

· Understanding the requirement of tender documents

· Exercise collaborative plan and define extend of works

· Understanding and achieving within timelines and timely management of tender activities

· General duties include measurement of quantity, collection quotation, cost comparison, and participating in preparing tender price

· Review of quotations with the specifications

· Study and identify discrepancies in tender/contract documents and raise queries for clarifications

· Proofreading of tender responses to highlight areas for incorporation of quantity and ensure issuance to stakeholders to quote for works

· Negotiate the price with the Subcontractors and Suppliers

· Review of cost impact (Value Engineering proposal/ Variations)

Requirements:

· Above 5 years of cost estimating experience

· Work independently with minimum guidance and under pressure to meet tight deadlines

Responsibilities

§ Manage and supervise all M&E works, installation and site work etc.

§ Supervise a team of Engineers/Technicians/Handyman

§ Prepare method statements, checklist, and work progress reports

§ Coordinating with authorities, clients and consultants , attend meetings, etc

§ Assume responsibility for other duties assigned by Management

Requirements

· ITE/Diploma/Degree in project management, mechanical/electrical engineering, or other related fields, or an equivalent combination of education, training, and experience that provides the required knowledge, skills, and abilities

· Minimum 1 years of working experience

· Knowledge of swimming pools project would be an advantage

· Proficient in Microsoft Word, PowerPoint, and Excel

· Good verbal and written communication skills

· Strong customer service skills, with the ability to multi-task

· Resourceful self-starter, able to work independently yet co-ordinates and teamwork seamlessly to achieve the common aim of delivering the best to customers

· Retiree are welcome to apply

· Monday-Friday

1) Experience in M&E QS scope of works and had participated in tender projects of more than $2 Mil

(2) Good Communication Skill and a Good Team Player

(3) At Least 7 years of experience in M&E field of works

(4) Resourceful and Outcome-based attitudes to explore any new arisings

(5) Experience in Project Tender Documentation and Submission requriement

(6) Require to attend Tender Site Show-arounds and Project Meetings with Project Director/Manager

Required Key Skills

• Expert level knowledge in implementation and maintenance of Cisco Routers and Switches of all series.
• Good knowledge in Cisco IOS
• Good knowledge in implementation and operations support of NAC (network access control)
• Good knowledge in Aruba Clear Pass / Cisco ISE
• Good knowledge in Wireless Network / Access Points / Controllers support and troubleshooting
• Expert level understanding of the OSI or TCP/IP model
• Provide Level-2 technical support and troubleshooting to resolve issues
• CCNP certification
• Hands-on experience with monitoring, network diagnostic, Packet Tracers and network analytics tools
• Good knowledge on Firewall Products like Cisco ASA, FortiGate, Palo Alto, Checkpoint
• Good knowledge on Aruba ClearPass/Cisco ISE, Cisco wireless controllers
• Knowledge on F5 load balancers

Priority Tasks

• Workplace is at customer premises and staff has to follow instituted Workplace securities
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem w.r.t Routing and Switching
• Perform configuration change activities
• Provide problem status to the Service Desk and/or update into the ticketing tool according to the Procedures Manual
• Perform day-to-day Network operation for the Network Infra-structure and Network Equipment at the customer/IBM premises, including performance monitoring, bandwidth monitoring.
• Work with customer's vendor to perform testing and preventative maintenance according to the schedule provided by the customer for the Network Equipment
• Perform periodic OS upgrade and Patching as and when required.
• 24X5 rotational shift onsite availability and 24X7 standby / remote support availability as and when needed for critical incidents.
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem
• Provide proactive incident reports for all Network related problems, faults, events within TWENTY-FOUR (24) hours
• Respond to all fault calls inclusive of emails and other forms of communications for Firewall related issues and problems reported
• Escalate the problem to Vendors Support in timely manner and get the issue resolved within the specified time as agreed with the customer/IBM
• Provide multi-vendor equipment support across a wide range of models and types of networking equipment
• Maintain the inventory of certificates and install/update/renew certificates as and when required.
• Perform security activities like hardening/periodic health check/ ID validation and other compliance activities as per IBM security policies and standards.
• Maintain/Update IBM inventory list and compliance related databases or similar Databases.
• Maintain the device inventory list for the client when needed, Maintain the software/firmware for all the devices up to date
• Subscribe to vendor notifications for the managed devices for vulnerabilities and review/validate/apply security patches pro-actively.
• Perform device activation / deactivation as per IBM service activation and deactivation process.
• Maintain the IP address inventory and allocate new IP address when required by business.
• Engage third part vendors to resolve hardware issues and follow up till closure
• Monitor vendor End of Life / End of Support notifications for all In Scope Devices and inform the client.

- Station on-site and perform daily inspection and preventive maintenance works in Mechanical and Electrical Systems according to Scheduled Maintenance

- Attend to feedback, Breakdown and customer service requests

- Attend to Fault-Calls and carry out rectification of Faults within specified time and budget

- Supervise and coordinate with contractors and vendors on works according to scheduled maintenance, repair, shut-down and overhaul works

- Assist Engineer/Manager to update records of Mechanical and Electrical system servicing reports and monitor the performance of the systems and equipment

1. To report to the Manager or team leader as shown in the organization chart.

2. Execute projects as per techinical drawings and specification.

3. Liaison with consultant, client, subcontractor, and supplier.

4. Coordination with office support.

5. Ensure safe and quality compliance.

6. Cost control for material.

7. Manage productivity and work flow.

8. Ad-hoc matters as assigned.

Job Requirement

- Diploma/Bachelor's degree in Civil & Structural Engineering

- Mininum 1 - 3 years' experience working in construction industry

- Fresh graduate is welcome to apply

• Responsible for day-to-day financial accounting functions
• Manage full set of accounts, AP & AR
• Prepare GL schedules, bank reconciliations
• Preparation and submission of quarterly GST returns
• Assist in financial reporting and audit processes
• Other ad-hoc duties assigned by the superiors

Job Requirements:

• Possess at least a Account LCCI or equivalent
• At least 2-3 years of relevant experience
• Possesses integrity and maintain confidential information
• Good written and verbal communication skills
• Proficient with MS Office

This position reports to the director. Maxin Construction & Engineering is committed to an employee-orientated, high performance culture that emphasises empowerment, quality, continuous improvement, and the recruitment and on-going development of a superior workplace.

Individual to be involved in:

1. Project planning & implementations sessions

2. Liase with external vendors & suppliers for design & build projects

3. Managing project progress and adapt work as required

4. Managing relationships with vendors,suppliers & stakeholders

5. Overseeing all incoming and outgoing project documentation

6. Participating in tender process & cost control requirements

Technical Skills & Competencies:

1. Active participation in manage projects & work areas by setting objectives, project plans, methodologies and timelines to ensure successful outcomes

2. Review, implement and oversee all cost controls, policies and procedures and oversee internal control

3. Develop and implement improvements to new/existing project procedures in order to maximize efficiency and improve project costs

4. Able to plan & monitor project progress to ensure timely completion

5. Perform all aspects of project management functions and to ensure proper post-contract administration

Duration: 6 months programme

Required Key Skills

• Expert level knowledge in implementation and maintenance of Cisco Routers and Switches of all series.
• Good knowledge in Cisco IOS
• Good knowledge in implementation and operations support of NAC (network access control)
• Good knowledge in Aruba Clear Pass / Cisco ISE
• Good knowledge in Wireless Network / Access Points / Controllers support and troubleshooting
• Expert level understanding of the OSI or TCP/IP model
• Provide Level-2 technical support and troubleshooting to resolve issues
• CCNP certification
• Hands-on experience with monitoring, network diagnostic, Packet Tracers and network analytics tools
• Good knowledge on Firewall Products like Cisco ASA, FortiGate, Palo Alto, Checkpoint
• Good knowledge on Aruba ClearPass/Cisco ISE, Cisco wireless controllers
• Knowledge on F5 load balancers

Priority Tasks

• Workplace is at customer premises and staff has to follow instituted Workplace securities
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem w.r.t Routing and Switching
• Perform configuration change activities
• Provide problem status to the Service Desk and/or update into the ticketing tool according to the Procedures Manual
• Perform day-to-day Network operation for the Network Infra-structure and Network Equipment at the customer/IBM premises, including performance monitoring, bandwidth monitoring.
• Work with customer's vendor to perform testing and preventative maintenance according to the schedule provided by the customer for the Network Equipment
• Perform periodic OS upgrade and Patching as and when required.
• 24X5 rotational shift onsite availability and 24X7 standby / remote support availability as and when needed for critical incidents.
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem
• Provide proactive incident reports for all Network related problems, faults, events within TWENTY-FOUR (24) hours
• Respond to all fault calls inclusive of emails and other forms of communications for Firewall related issues and problems reported
• Escalate the problem to Vendors Support in timely manner and get the issue resolved within the specified time as agreed with the customer/IBM
• Provide multi-vendor equipment support across a wide range of models and types of networking equipment
• Maintain the inventory of certificates and install/update/renew certificates as and when required.
• Perform security activities like hardening/periodic health check/ ID validation and other compliance activities as per IBM security policies and standards.
• Maintain/Update IBM inventory list and compliance related databases or similar Databases.
• Maintain the device inventory list for the client when needed, Maintain the software/firmware for all the devices up to date
• Subscribe to vendor notifications for the managed devices for vulnerabilities and review/validate/apply security patches pro-actively.
• Perform device activation / deactivation as per IBM service activation and deactivation process.
• Maintain the IP address inventory and allocate new IP address when required by business.
• Engage third part vendors to resolve hardware issues and follow up till closure
• Monitor vendor End of Life / End of Support notifications for all In Scope Devices and inform the client.

Key Responsibilities:

• Assist with recruitment efforts, including posting job openings, reviewing resumes, and scheduling interviews.

• Conduct reference checks and background screenings.

• Assist with onboarding new employees, including preparing offer letters, conducting orientation sessions, and creating employee files.

• Provide administrative support to the HR Manager, including managing calendars, scheduling meetings, and preparing reports.

• Assist with employee relations, including answering employee questions and escalating issues to the HR Manager as necessary.

• Manage employee data

• Assist with benefits administration, including enrollments and changes.

• Maintain HR files and documents, ensuring all paperwork is complete and accurate.

• Assist with HR projects as needed.

Requirements:

• 1-2 years of experience in an HR support role.

• Knowledge of HR laws and regulations.

• Excellent communication and interpersonal skills.

• Strong attention to detail.

• Ability to maintain confidentiality.

• Proficient in Microsoft Office.

• Ability to work independently and prioritize tasks.

• Strong organizational and time management skills.

• Ability to work in a fast-paced environment.

Job Description • Answer and direct phone calls and emails

• Organize and schedule appointments

• Write and distribute emails, correspondence memos, letters, faxes, and forms

• Assist in the preparation of regularly scheduled reports

• Develop and maintain a filing system

• Update and maintain office policies and procedures

• Order office supplies and research new deals and suppliers

• Provide general support toisitors

• Act as the point of contact for internal and external clients

• Perform other duties as assigned by the supervisor

(Able to work at Tuas)