Total 251 service operations manager job vacancies in Information Technology category in d22 jurong jurong island tuas

Job Description

• Operate the power plant according to procedures and requirements including but not limited to starting, loading, unloading and shutting down the complete plant and systems
• Support the ASCE/SCE/PSCE to meet the contractual, technical and commercial set-up and operation of the Power Station
• Have sound knowledge of the safe operating parameters, controls, precaution and safety interlocks when starting and loading plant equipment so as to avoid damage and to be able to run the plant in the most efficient manner
• Plant process conditions troubleshooting, analyzing and testing when necessary
• Able to manage, monitoring and control the plant process operation from control room DCS
• Record plant operating data and report defects and abnormalities
• Carry out isolation/normalization of equipment as require by the Permit To Work System
• Understand and familiar with Plant Chemistry including handling of plant waste discharge
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices
• Input to and liaison where necessary for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Assist to fully develop and utilize the CMMS for efficient and effective Power Station operation practices
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• Communicate with Regulatory and Authority on all operation matters on a timely manner
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Possess at least a Diploma in a relevant engineering discipline
• Relevant competency certificate as issued by the Singapore regulatory authority, or education leading to this will be advantageous
• At least 6 years of working experience in Power Station Operations (ideally on a CCPP)
• Ideally involved in the technical and maintenance aspects of Gas Turbines, with some experience in the erection, commissioning and initial start-up phases of a modern Power Station
• Knowledgeable and experienced in Health, Safety and Environmental practices
• Willing to work in Jurong Island and on 12-hour rotating shifts
• Transport provided at Jurong East MRT station

• Operate the Combined Cycle Power Plant safely, efficiently, and in accordance with established operational guidelines to meet output requirements.
• Prepare for, execute, and monitor the startup, shutdown, and routine operations of generation units and auxiliary systems.
• Carry out condition monitoring, review operating parameters, and correct deviations to maintain optimal plant performance.
• Identify, report, and rectify all system, plant, and equipment defects.
• Ensure adherence to the plant’s generation dispatch schedule, conducting operational tests and inspections as required.
• Respond to plant emergencies, equipment failures, and outages.
• Manage generating unit operations and maintenance activities, ensuring compliance with safety measures and specifications.
• Monitor work areas and inspect tools and equipment to detect and prevent unsafe conditions or violations of procedures and safety rules.
• Prepare daily shift log reports and other operational reports.
• Liaise with external agencies (e.g., EMA PSO, PUB, NEA, SCDF) on operational matters during shift duty.

Requirements:

• Diploma in Mechanical, Electrical Engineering or an equivalent discipline.
• Knowledge of plant processes, operations, and safety protocols.
• Relevant experience in power plant operations, or related industries, is advantageous.
• Possession of a 2nd Grade Engineer (Steam) Certificate of Competency or a 1st Grade Engineer (Steam Combustion Engine) Certificate of Competency awarded by the Ministry of Manpower is an advantage.
• Proficiency in Microsoft Word, Microsoft Excel, and Maximo EAM or equivalent software.
• Strong analytical and communication skills, self-motivated, independent, and a team player.
• Willingness to work 12-hour rotating shifts.

Qualification:

-Degree in Electrical.

- 3-5 yrs experience at Electrical Equipment.

Job Description:

Improved JD:

• Oversee the maintenance, monitoring, and uptime of EV charging stations to ensure seamless customer experiences. Lead a service team.

• Manage the lifecycle of technology assets, including chargers, software platforms, and network security, ensuring system reliability and scalability.

• Establish and implement SOPs for troubleshooting and preventive maintenance, optimizing network performance.

• Implement data analytics solutions to monitor and analyze charging station performance, driving continuous improvements in operational efficiency.

- Collaborate with key vendors, suppliers, and partners to secure and manage essential hardware, software, and support services. Oversee the design, testing, and implementation of new chargers, including setting up Router, LAN or SIM. Set up API.

- ⁠Ensure that all technology solutions comply with local regulations and industry standards for safety, environmental impact, and cybersecurity.

• Oversee the implementation of cybersecurity protocols to protect customer data and infrastructure from potential threats.

- Work closely with the customer support team to address technical issues and improve customer satisfaction.

• Evaluate and manage relationships with Factory & technology providers, ensuring cost efficiency and quality.

Responsibilities

● This position will oversee SEA and MENA operations

● Oversee the user growth operations, helping drive initiatives to grow our long-term business and strategic partnerships

● Identify and manage initiatives to improve operational processes and reduce operational risks.

● Monitor operational and risk metrics and escalate potential issues or anomalies

● Deliver recommendations to upper management that shape company and product strategy through coordinating in-depth market research and synthesizing findings

● Work effectively with cross-functional teams within Operations as well as Marketing.

● Collaborate with partners both internal and external to improve points of failure, resolve partner issues, document all critical processes and drive accountability/performance in line with commercials

● Troubleshoot and solve ad-hoc issues in a timely manner

● Manage the full lifecycle of operations from strategy to implementation.

Requirements:

● At least 2 year of experience in blockchain industry

● At least 10 years of experience in Fintech,reputable internet companies, Operations and/or partner management

● 3 years of management experience

● Keen understanding of financial markets (traditional finance, fintech, venture capital, etc.) and technology

● Self-motivated individual who can work with minimal supervision and thrive in a distributed and multicultural team setting

● Strong commercial and operational acumen and critical problem solving skills

● Experience in trading operations and asset custody

● Strong analytical skills to develop reporting, effectively make use of tools and other business processes to elevate operations and enable analysis of nascent industry movements

● Fluency in English, knowledge of other languages, e.g. Chinese, would be an advantage in order to liaise with stakeholders across the region

● Experience in and understanding of blockchain trading business a plus

Your Mission

This position is responsible for driving activities related to digital transformation as a member of the Program Management Office at HMGICS. The role involves developing revenue generation and operational models for training, advisory, and solutions focused on digital transformation and new manufacturing technologies. Additionally, the position will serve as the junior chief of staff to the Chief Innovation Officer, with the potential to assume full responsibilities within the short-term, based on performance.

What To Expect

[1. PMO Member for Digital Transformation - 20%]

• Help define and enforce agile work processes to continually improve the velocity and impact of digital transformation activities undertaken by the relevant technology and manufacturing squads. As a member of the PMO squad serving Digital Transformation, this involves applying core technologies such as IoT, AI/ML/LLM, simulation, and automation to enhance operational performance.
• Engage with all relevant stakeholders within and outside HMGICS to develop insights that accelerate digital transformation.

[2. Revenue Generation and Operational Models - 50%]

Develop new revenue generation and operational models for HMGICS based on core capabilities. This may include, but is not limited to:

• Learning and training programs on Digital Transformation, e.g., for other manufacturing companies.
• Advisory and technology consulting services to assist companies in adopting digital transformation.
• Provision of core technology solutions.
• Other initiatives within the Hyundai Motor Group.

[3. Junior Chief of Staff - 30%]

Assist the Chief of Staff to the Chief Innovation Officer (CIO), with the goal of becoming the full Chief of Staff within 1-2 years:

• Actively manage the CIO Organization’s activities, time, and priorities to maximize impact and ensure the achievement of HMGICS's core objectives.
• Prepare briefing materials, presentations, and reports for executive meetings and communications on behalf of the CIO.
• Develop strong relationships with senior stakeholders within HMGICS, the Hyundai Motor Group, and external partners, with the aim of overseeing and coordinating cross-functional initiatives, particularly those related to Mission 2.
• Grow into a trusted advisor and thought partner for the CIO, providing insights and recommendations on critical decisions.
• Handle confidential and sensitive information with the utmost discretion.

What You'll Bring

• Bachelor's degree in Engineering (preferred); MBA is a plus.
• Minimum of 2 years of experience at a top-tier management consulting firm, with strong references.
• Technical expertise in process innovation and business consulting projects.
• Extensive project experience in digital transformation, capability building, and new business models.
• Exposure to the technology or automotive industries.
• Advanced proficiency in MS Office and MS PowerBI.
• Passion for the future mobility industry and a desire for accelerated growth within the organization.
• Strong interest in and familiarity with technology innovation and future tech trends, as well as business model creation.
• Inquisitive mindset with a focus on continuous improvement through innovative thinking and structured problem-solving.

Key Responsibilities:

Team Leadership: Lead, mentor, and develop a team of engineers and technical staff.

Project Management: Plan, execute, and deliver projects on time and within budget while ensuring quality standards.

Technical Guidance: Provide technical direction and support to team members, helping to resolve complex issues and promoting best practices.

Collaboration: Work closely with vendors, classification society, and other stakeholders to align technical solutions with project objectives.

Quality Assurance: Implement and maintain processes for quality assurance and continuous integration.

Budget Management: Manage technical budgets and resource allocation effectively.

Innovation: Stay current with emerging technologies and industry trends to drive innovation within the team.

Are you looking to work with energy reduction solutions in a global organization committed to sustainability and innovation?

Job purpose:

To strategically lead the AI and automation delivery organization within CBS, driving the ideation, development, and implementation of the global CBS AI and RPA roadmap to enhance operational efficiencies, customer satisfaction, and competitive advantage globally, by operationalizing a new capability center in Singapore.

Key Accountabilities / Responsibilities

• Establish and operationalize a dedicated capability center in India for in-house AI development, and continuously lead and manage a highly motivated team. (20%)
• Establish and facilitate forums to engage and negotiate with senior management across CBS, cross-divisionally, and group functions to define and align AI initiatives and business objectives. (15%)
• Strategically formulate and deploy an AI and automation operating model, involving key stakeholders across CBS and Grundfos to foster innovation with cutting-edge technologies. (15%)
• Define and execute the AI and RPA roadmap to drive operational efficiencies across End to End CBS, and deliver value for One Grundfos. (15%)
• Lead the team to continuously develop processes, capabilities, and ways of working, and head technological progress and development to fulfill the business needs for scaling and technical advancements. (10%)
• Lead the change to ensure stakeholders are committed and actively participate in roadmap implementation, driving a strong collaboration and trust culture across team members and key collaboration partners for ideation, development, delivery, and implementation. (10%)
• Manage a global and diverse team, fostering a culture of innovation in a fast-paced and complex environment. (5%)
• Oversee budgeting and funding activities, ensuring optimal allocation and utilization of resources. (5%)
• Facilitate effective communication towards the CBS Leadership team to approve and prioritize roadmap activities and communicate decisions across the CBS organization. (5%)

Required Minimum Qualifications:

• Proven experience developing and executing key strategic initiatives within a complex business environment; experience working in a global environment is strongly preferred.
• A Master’s degree in a relevant field is required.
• Knowledgeable of agile methodologies, demonstrating the ability to adapt quickly to change and efficiently deliver projects in a dynamic and iterative development environment.
• Experience developing and implementing operating processes and setting strategic direction for AI and automation initiatives, in a global context.
• Strong leadership in driving AI initiatives across functions, with a high focus on End-2-End impact
• Experience in leading people directly or indirectly.
• Ability to influence and guide teams and stakeholders.
• In-depth knowledge of AI and RPA applications and best practices.
• Expertise in technical RPA and AI solutions in order to set direction.

About the Role

Zero-Error Systems (ZES) is seeking versatile, detail-oriented Field Application Engineering - Manager. In this role, you will work closely with the sales and engineering team to identify customer needs, develop technical solutions, and ensure the successful implementation and optimization of ZES’ products. Working in a dynamic, fast-paced, development environment, you will also play a crucial role in providing technical support and expertise to customers. This position requires a blend of technical knowledge, customer interaction, and problem-solving skills.

Key Responsibilities

1) Customer Support and Relationship Management

• Serve as the primary technical contact for customers, addressing their queries and providing technical support.
• Build and maintain strong relationships with customers to understand their requirements and provide tailored solutions.
• Provide effective FAE support to customers for ZES products, through alignment with internal sales teams and engineering team.

2) Pre-Sales Support:

• Collaborate with the sales team to understand customer needs and develop technical proposals.
• Assist in the preparation and delivery of product demonstrations and technical presentations to potential customers.
• Provide technical input for the development of sales strategies and proposals.

3) Technical Expertise and Solution Development:

• Stay up-to-date with industry trends, emerging technologies, and competitive products.
• Develop and customize technical solutions to meet specific customer requirements.
• Partner closely with the engineering team to provide customer feedback and influence product improvements.

4) Post-Sales Support:

• Ensure successful product implementation and integration at customer sites.
• Provide ongoing technical support and troubleshooting to resolve customer issues.

5) Documentation and Reporting:

• Prepare and maintain detailed technical documentation, including application notes, user guides, and technical reports.
• Maintain accurate records of customer interactions, issues, and solutions.
• Provide regular updates and reports to management on customer activities and support issues.

6) Any other duties assigned

Key Requirements

• Bachelor’s in Electrical Engineering or related field.
• Strong understanding of the semiconductor industry, market dynamics, and competitive landscape in the region.
• Proven experience in a field application engineering or similar technical support role, for Semiconductor components, including Power management IC, MCU/FPGA is preferred.
• Excellent problem-solving and analytical skills.
• Strong interpersonal and communication skills.
• Able to work independently as well as a good team player
• Detail-oriented, with a strategic outlook and a focus on driving results.
• Willingness to travel to customer sites and industry events as required.

Position Overview:

We are seeking an experienced Executive Director to lead our Financial Crimes & Regulatory Operations Technology. The ideal candidate will bring a wealth of expertise in Financial Crimes Risk Management, AML, fraud detection, and technology delivery management within the banking and financial services industry. With responsibility over multi-national teams, the role requires a leader skilled in agile transformation, stakeholder management, and complex technology solutions.

Key Responsibilities:

• Direct end-to-end technology delivery for financial crimes, compliance, fraud, and risk management projects.
• Oversee teams across India, USA, Mexico, and the Philippines, managing technology design, coding, and seamless execution of critical transformation programs.
• Act as the primary point of contact for the Actimize platform, driving solutions for AML, CDD, SAM, and CTR needs.
• Lead Agile transformation for cross-functional teams, integrating Scrum and Kanban methodologies.
• Foster collaboration between business, operations, and technology teams, translating business requirements into actionable deliverables.
• Champion Diversity, Equity & Inclusion initiatives, supporting Pride, Disability, Generation, and Veteran communities within the organization.

Qualifications:

• Bachelor’s degree in Electronics & Communication Engineering or equivalent field.
• Mandatory
• Minimum 20+ years in technology delivery management, with at least 7 years in financial crimes, AML, or related fields.
• Proven expertise in Actimize implementation, including AML and fraud prevention solutions.
• Skilled in Agile methodologies, stakeholder management, and multi-geographic team leadership.
• Strong experience in risk management and compliance within financial services.
• Exceptional communication skills, with a track record of aligning technology solutions with business objectives.

Qualification:

-Degree in Electrical.

- 3-5 yrs experience at Electrical Equipment.

Job Description:

- project management: Liaise with contractor to set up charger including Router , LAN or SIM. Link API to platform.

- ⁠Repair & maintenance Troubleshooting , replacement of parts, liaise with factory; logging & data retrieval.

- ⁠planning & leads a team for charger maintenance. Offer service to customer.

- ⁠Apply LTA technical requirements .

Position Summary:

IT Program Manager will be responsibleto lead the company level IT programs. One such program currently running is the rollout of a global SAP template across various locations.

Based in Singapore, the ideal candidate will have functional background in SAP (PP, QM, SD, MM, or FICO), but will focus exclusively on project management responsibilities, including vendor management and project governance.

This role will involve managing the rollout globally, ensuring adherence to timelines, budgets, and scope.

The ideal candidate will have 14-18 years of total experience, with significant exposure to SAP projects.

Key Responsibilities:

1. Project Management:

• Lead the project management of the global SAP template rollout, focusing on planning, execution, and monitoring of project deliverables.
  • Oversee the implementation of SAP PP and QM modules within the global template framework across multiple countries.
  • Develop and maintain project plans, schedules, and budgets to ensure the successful and timely completion of the project.
  • Identify, mitigate, and manage project risks, issues, and dependencies to ensure smooth delivery.

2. Vendor Management:

• Serve as the primary point of contact for vendors, managing relationships and ensuring they meet contractual obligations.
• Oversee vendor performance and hold regular reviews to ensure project requirements and timelines are met.
• Negotiate with vendors as needed to ensure project goals are achieved within budget and scope.

3. Stakeholder Management & Communication:

• Provide regular project updates to senior management and key stakeholders, ensuring clear communication of project progress, risks, and any required decisions.
• Collaborate with cross-functional teams, including regional teams from various locations, to ensure alignment with business objectives.
• Facilitate communication between the global and local project teams, focusing on project logistics and delivery.

4. Global Template Rollout:

• Ensure the successful rollout of the global SAP template across multiple regions, aligning local requirements with the global strategy.
• Ensure consistency and quality in the implementation process across all regions involved.
• Support other global and regional rollouts as required.

5. Project Focus:

• Focus solely on project management tasks (timeline, budget, resources, risk management), leveraging existing resources to handle the functional and technical requirements.
• Coordinate with business analysts, solution architects, and technical teams to ensure alignment without needing to act as the conduit between business and technical teams.

Position Requirement

1. FORMAL EDUCATION:

Required:

• Bachelor’s degree in information technology, Business Management, or a related field.
• PMP or Prince2 and SAP – certifications are mandatory

2. KNOWLEDGE & EXPERIENCE:

Required:

• 14-18 years of total experience in SAP-related projects (functional and/or project management).
• SAP functional background in one or more of the following modules: PP, QM, SD, MM, or FICO.
• Proven experience in managing large-scale SAP projects, particularly across multiple regions.
• Strong vendor management experience, with a proven ability to manage third-party deliverables.

3. TECHNICAL/SKILL REQUIREMENTS:

Required:

• Excellent project management skills with the ability to drive large, complex projects to successful completion in a fast-paced environment.
• Understanding of SAP systems, particularly with a functional background in SAP PP, QM, SD, MM, or FICO.
• Strong leadership, problem-solving, and decision-making capabilities.
• Excellent communication skills, particularly with stakeholders across various levels and regions.
• Ability to manage multiple workstreams and ensure project alignment with global strategies.
• Willingness to travel as needed.

4. Travel Requirements:

• To travel frequently.

Responsibilities

• To maintain and increase market share in the Asian region by providing sales support through lab work and customer seminars at the Technical Center.

- Capture data and prepare reports based upon customer requirements.

- Planning and execution of customer seminars.

- Respond to customer technical complaints.

- Safety management of assigned area in Technical Center.

- Proposal of optimum utilization of Technical center for future.

• Promote the development of new markets - sustainable foamed material, new agriculture technology, etc.
• Collaborate with universities, research institutes, and companies in Singapore and neighboring countries to select potential new technologies/markets for the future.

Our Requirements

• Master’s degree in Engineering.
• Knowledge of polyvinyl alcohol and its applications.
• At least 3-5 years knowledge and experience in laboratory work and evaluation for polyvinyl alcohol and its application.
• Proficient in spoken and written Japanese as communication with Japan headquarters and R&D is a must.

Job Description & Requirements:

• Ensure correctness of build-up according to construction plans and drawing.

• Assist to prepare tender documents including project plan, construction, construction schedule plan and quality assurance measurement based on technical standard.

• Prepare technical support documents such as construction technical proposal for bidding

project.

• Coordinate with engineering team to prepare engineering drawings and sketches for further operation.

• Coordinate with consultant and client and prepare presentation documents for bidding projects.

• Involved in detailed site investigation, terrain, landform, underground and other conditions as generate various technical design example drainage, power and communication supply.

• Design drawings including layouts, elevations and details.

• To provide drawing modifications and advice on altering design changes to suit site condition under the guidance of Engineers.

• Participate in management and implementation of design and various technical data, responsible for compilation of construction operation instructions and technology summary and report to Managers.

• Prepare detailed monthly and weekly progress plans to project team according to monthly/annually progress targets as assigned.

• Communicate with government personnel/owner/developer to coordinate existing site issue as necessary.

• Ensures timely, safe, and cost-effective design and implementation throughout the project lifecycle from conception to client satisfaction.

• Maintain, drive, supervise and implement robust technical standards, systems and processes

• Prepare detailed bill of quantities, and carry out accurate accounting of various quantities to ensure that the quotation conforms to the design drawings and specifications

• Influence technology strategies and decisions with a high-level of expertise and knowledge

• Provide direction and support to ensure compliance with relevant legislative specifications and standards

• Lead a team of workes developing, and address training needs when necessary

• Coordinate the regular testing of to address faults, and provide evaluations to improve

• Act as a key contact with customers who have technical issues

• Write and prepare several construction technical plans as for backup

• Compile schedule plan and personnel mechanical allocation table as report for managers

• Management of all site engineers on using machine at work for coordination matters

• Fluent in drainage systems, design and installation of drainage systems to manage stormwater and prevent flooding

• Supervising work for the safety and the efficiency of production on technical progress at site

• Able to advice and propose based on - Construction of steel cofferdam in water, Underwater pile construction, Equipment Structural standard, Earthwork survey, Geological research

Job Requirements:

• Degree in Civil Engineering.

• Minimum 10 year(s) of working experience in the construction projects

• At least 5 years in bridge construction project

• Experience with Marine or Shipyard Project will be an advantage

• Ability to clearly particulate expectations

• Ability in quality control and checking

• Able to supervise and lead the survey team for handling all survey related issues.

• Able to provide design and drawings based on requirement and quotation.

• Able to provide advices on altering design changes to suit site condition.

• Comprehensive problem-solving abilities.

• Knowledge on Underwater Construction Site exp: Construction of steel cofferdam in water, Underwater pile construction, Equipment Structural standard, Earthwork survey, Geological research

Job Description & Requirements:

• Ensure correctness of build-up according to construction plans and drawing.

• Assist to prepare tender documents including project plan, construction, construction schedule plan and quality assurance measurement based on technical standard.

• Prepare technical support documents such as construction technical proposal for bidding

project.

• Coordinate with engineering team to prepare engineering drawings and sketches for further operation.

• Coordinate with consultant and client and prepare presentation documents for bidding projects.

• Involved in detailed site investigation, terrain, landform, underground and other conditions as generate various technical design example drainage, power and communication supply.

• Design drawings including layouts, elevations and details.

• To provide drawing modifications and advice on altering design changes to suit site condition under the guidance of Engineers.

• Participate in management and implementation of design and various technical data, responsible for compilation of construction operation instructions and technology summary and report to Managers.

• Prepare detailed monthly and weekly progress plans to project team according to monthly/annually progress targets as assigned.

• Communicate with government personnel/owner/developer to coordinate existing site issue as necessary.

• Ensures timely, safe, and cost-effective design and implementation throughout the project lifecycle from conception to client satisfaction.

• Maintain, drive, supervise and implement robust technical standards, systems and processes

• Prepare detailed bill of quantities, and carry out accurate accounting of various quantities to ensure that the quotation conforms to the design drawings and specifications

• Influence technology strategies and decisions with a high-level of expertise and knowledge

• Provide direction and support to ensure compliance with relevant legislative specifications and standards

• Lead a team of workes developing, and address training needs when necessary

• Coordinate the regular testing of to address faults, and provide evaluations to improve

• Act as a key contact with customers who have technical issues

• Write and prepare several construction technical plans as for backup

• Compile schedule plan and personnel mechanical allocation table as report for managers

• Management of all site engineers on using machine at work for coordination matters

• Fluent in drainage systems, design and installation of drainage systems to manage stormwater and prevent flooding

• Supervising work for the safety and the efficiency of production on technical progress at site

• Able to advice and propose based on - Construction of steel cofferdam in water, Underwater pile construction, Equipment Structural standard, Earthwork survey, Geological research

Job Requirements:

• Degree in Civil Engineering.

• Minimum 10 year(s) of working experience in the construction projects

• At least 5 years in bridge construction project

• Experience with Marine or Shipyard Project will be an advantage

• Ability to clearly particulate expectations

• Ability in quality control and checking

• Able to supervise and lead the survey team for handling all survey related issues.

• Able to provide design and drawings based on requirement and quotation.

• Able to provide advices on altering design changes to suit site condition.

• Comprehensive problem-solving abilities.

• Knowledge on Underwater Construction Site exp: Construction of steel cofferdam in water, Underwater pile construction, Equipment Structural standard, Earthwork survey, Geological research

As ANCS (Automation, Navigation & Control Systems), we transform how vessels perform to create the safest and most efficient journey for our customers – always with the vision in mind to navigate towards a more sustainable maritime industry. With our rich history of pioneering maritime technologies, we have defined industry benchmarks.

To be better tomorrow, we need the right talents today to complement our strong team of 650 employees in over 10 countries across the globe with the right skills, experience, and a winning attitude.

Nacos Marine Singapore is looking for Technical Support Manager to join our team.

This is a permanent opportunity, located at Jurong East, Singapore.

In this position, your work will focus on these responsibilities:

• Located in Singapore to cover Asia’s Customers issues (AUT & NAV) in ANCS
• Provide remote diagnosis of problems and definition of further steps to be taken to further isolate or remedy the problem, with appropriate communication to the customer and, if necessary, to other departments, where troubleshooting requires it
• Attend Field Service activities in Asian countries
• Perform root cause analysis of technical problems at ship and equipment level
• Independent clarification of complex service problems of the entire product range including preparation of a detailed solution proposal in cooperation with the product management
• Findings for special problem cases, if it is necessary, carry out of the required on-board repair, on board attendances for installation/commissioning/services
• Preparing for meetings Technical topics and analysis for order and service management
• Present Life Cycle Management meetings with customers
• Attend site survey and health check of customer installation on site
• Special tasks: participation on call on duty, surveys, trainer activities etc.
• Deep understanding of NACOS related automation system
• Training of team members in the Asia region.

To be successful in this role, we expect you to have:

• Diploma in Engineering and above
• Minimum of 20 years work experiences in similar position
• Experienced in PCS, MCS and PLC related platform for automation system
• Coding requirements : IEC and SLS coding
• Strong in Automation Technical Skill
• Experienced with independent hands-on personnel on ANCS products and Automation
• Good interpersonal skills with ability to work both independently and as part of a team

Please note that according to Wärtsilä policy, voluntary consent for a background check is required for candidates being considered for this position.

Why you and us?

We at Wärtsilä ANCS believe in empowerment, ownership and taking responsibility of our work. We support each other’s growth and cocreation is the true basis of our innovation. We have courage to see opportunities and take initiative.

We are authentic and honest, and we strongly believe in that by being your own true self you can accomplish so much more. We don’t always get it right the first time, and if mistakes are made, we make sure to learn and grow from them. We want everyone to voice their opinions freely. That is why we have built an environment that empowers you and everyone around you, and where you can feel safe and cared for. Are you eager to be part of this ambition?

We have an amazing team, and we are excited about our work and the impact it has on building sustainable societies. We are looking to find a colleague with this shared passion for smart technologies and a sustainable future.

Key Responsibilities

• Accountable for end-to-end delivery of CEW from pre-project to post go live support
• Providing technical leadership and guidance to team
• Partnering with business stakeholders, architects to understand business requirements and technical design
• Plan, manage, track delivery through a combination of agile tools and traditional planning tools where required to ensure overall delivery across all streams are sequenced and tracked
• Ensure risks are pro-actively managed and highlighted in right forums to seek support for resolution
• Deliver project in guidance and adherence to Bank’s software delivery, security, release management standard & guidelines.
• Ensure all deliverables, checkpoints are planned and delivered to meet the bank’s standards and quality gates
• Pro-active planning on development dependencies and plan and track them to closure
• Ensure quality standards are built into the development phase with a quality first approach
• Measure and monitor progress and quality using data-oriented approach
• Participate in scrum of scrums and cross stream meetings to discuss, highlight dependencies across systems.
• Conduct regular checkpoints (daily scrum, weekly project meetings) and track actions to closure
• Put in change management processes to manage and deliver agreed business outcomes
• During test phases, actively drive defect fixes to meet SLA’s. measure and manage defect density, re-open rates
• Promote a culture of inclusiveness and have active participation from the team during team meetings and standups.
• identify areas of improvement from each sprint and work towards continuous improvement to improve sprint velocity and quality
• Leading and contributing to cross-team improvement initiatives relating to agile methods, CI/CD tools, people, architecture, project management and governance, including further adoption and improvements to the Bank’s System Development Methodology (SDM)

Key Requirements

• At least 10 yrs experience with a track record of successfully delivering complex projects
• Should have had at least 5 years of experience in managing large scale projects & building applications from scratch using API’s and micro services and leading multiple streams
• Strong project / program management skills
• Should have prior experience in managing virtual teams in onsite/offshore model
• Should have a development background and the right level of experience and expertise to coach and design, plan and deliver complex applications
• Ability to work under pressure and strict deadlines
• Own overall delivery and drive team’s velocity
• Strong analytical and communication skills
• Go-getter
• Prior experience in Banking applications (customer facing – client onboarding or middleware payment processing systems) is a plus

Key Responsibilities

• Accountable for end-to-end delivery of CEW from pre-project to post go live support
• Providing technical leadership and guidance to team
• Partnering with business stakeholders, architects to understand business requirements and technical design
• Plan, manage, track delivery through a combination of agile tools and traditional planning tools where required to ensure overall delivery across all streams are sequenced and tracked
• Ensure risks are pro-actively managed and highlighted in right forums to seek support for resolution
• Deliver project in guidance and adherence to Bank’s software delivery, security, release management standard & guidelines.
• Ensure all deliverables, checkpoints are planned and delivered to meet the bank’s standards and quality gates
• Pro-active planning on development dependencies and plan and track them to closure
• Ensure quality standards are built into the development phase with a quality first approach
• Measure and monitor progress and quality using data-oriented approach
• Participate in scrum of scrums and cross stream meetings to discuss, highlight dependencies across systems.
• Conduct regular checkpoints (daily scrum, weekly project meetings) and track actions to closure
• Put in change management processes to manage and deliver agreed business outcomes
• During test phases, actively drive defect fixes to meet SLA’s. measure and manage defect density, re-open rates
• Promote a culture of inclusiveness and have active participation from the team during team meetings and standups.
• identify areas of improvement from each sprint and work towards continuous improvement to improve sprint velocity and quality
• Leading and contributing to cross-team improvement initiatives relating to agile methods, CI/CD tools, people, architecture, project management and governance, including further adoption and improvements to the Bank’s System Development Methodology (SDM)

Key Requirements

• At least 10 yrs experience with a track record of successfully delivering complex projects
• Should have had at least 5 years of experience in managing large scale projects & building applications from scratch using API’s and micro services and leading multiple streams
• Strong project / program management skills
• Should have prior experience in managing virtual teams in onsite/offshore model
• Should have a development background and the right level of experience and expertise to coach and design, plan and deliver complex applications
• Ability to work under pressure and strict deadlines
• Own overall delivery and drive team’s velocity
• Strong analytical and communication skills
• Go-getter
• Prior experience in Banking applications (customer facing – client onboarding or middleware payment processing systems) is a plus

Job Description

-Responsible for leading and managing an industry-facing programme focusing on AI solution development & implementation in manufacturing sector.

-Define & execute an overall programme management framework, including but not limited to finance / governance / resource management / IHL collaboration / stakeholder management / programme administration / project management etc.

-Responsible for the programme overall progress and compliance to grantor?s requirements, and report to all internal and external stakeholders regularly.

-Provide leadership guidance to project managers, coordinate cross-project activities to accomplish strategic objectives, oversee multiple projects across various research organizations, and ensure successful delivery of project scope and targets while managing all the risk, quality, delivery, scope, schedule, and budget.

-Support ecosystem development with relevant stakeholders from public agencies, IHL and industry for economic impacts in the programme.

-Work closely with AI researchers and manufacturing domain experts together with industry partners to capture AI manufacturing use cases and manage the full life cycle of R&D projects by planning organizing, executing, monitoring and evaluating from conception to completion, and eventually to industry implementation.

Job Requirement

• Bachelor or Masters in any Science & Engineering related disciplines.
• At least 5 years or more of large-scale multiple-party project management experience in technology and/or product development; any past experience on research project would be preferable.
• Ability to demonstrate a good level of understanding of various engineering subjects, manufacturing technology, product development, latest AI technology trend
• Ability to deal with complex stakeholder management with public agencies, academia, research organization, industry, and trade association.
• Good business acumen, able to identify business opportunity independently and interact with industry partners confidently.
• Proactive team player and technically motivated to solve problems, innovate and deliver to industry.
• Strong communicator with excellent interpersonal skills; strong logic thinking and writing skills.
• PMP certifications or equivalent will be advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

At Bank of America, we are guided by a common purpose to help make financial lives better through the power of every connection. Responsible Growth is how we run our company and how we deliver for our clients, teammates, communities, and shareholders every day.

One of the keys to driving Responsible Growth is being a great place to work for our teammates around the world. We’re devoted to being a diverse and inclusive workplace for everyone. We hire individuals with a broad range of backgrounds and experiences and invest heavily in our teammates and their families by offering competitive benefits to support their physical, emotional, and financial well-being.

Bank of America believes both in the importance of working together and offering flexibility to our employees. We use a multi-faceted approach for flexibility, depending on the various roles in our organization.

Working at Bank of America will give you a great career with opportunities to learn, grow and make an impact, along with the power to make a difference. Join us!

Your background

• Influence
• Stakeholder Management
• Result Orientation
• Technical Strategy Development
• Automation
• Application Development
• Solution Design
• Business Acumen
• Architecture
• Risk Management
• Solution Delivery Process
• Analytical Thinking
• Collaboration
• Agile Practices
• Data Management

What you can expect

This job is responsible for defining and leading the engineering approach for complex features to deliver significant business outcomes. Key responsibilities of the job include delivering complex features and technology, enabling development efficiencies, providing technical thought leadership based on conducting multiple software implementations, and applying both depth and breadth in a number of technical competencies. Additionally, this job is accountable for end-to-end solution design and delivery.

What you will do

• Ensures that the design and engineering approach for complex features are consistent with the larger portfolio solution
• Define the technology tool stack for the solution and evaluate and adapt new testing tool/framework/practices for team(s)
• Enables team(s)/applications with Continuous Integration/Continuous Development (CI/CD) capabilities and engages with other technical stakeholders pertaining to efficient functioning of CI-CD pipeline
• Guides and influences team(s) on design and best practices for high code performance –e.g. pairing, code reviews
• Provides end-to-end delivery of complex features, including automation, for either a single team or multiple teams, at the program level
• Conducts research, design prototyping and other exploration activities such as evaluating new toolsets and components for release management, CI/CD, and features
• Works with stakeholders to establish high-level solution needs and with architects for technical requirements

At Dow, we believe in putting people first and we’re passionate about delivering integrity, respect and safety to our customers, our employees and the planet.

Our people are at the heart of our solutions. They reflect the communities we live in and the world where we do business. Their diversity is our strength. We’re a community of relentless problem solvers that offers the daily opportunity to contribute with your perspective, transform industries and shape the future. Our purpose is simple - to deliver a sustainable future for the world through science and collaboration. If you’re looking for a challenge and meaningful role, you’re in the right place.

Summary

This TS&D specialist will play a key technical role in supporting the growth of the business under Packaging and Specialty Plastics of the Dow Chemical Company in different countries of SEA. The role is to be part of Dow’s cutting-edge technology development and resolve current and future scientific difficulties in material science.

Key responsibilities

1. Provide technical solutions

• Focus on client-side application development and technical support.
• Propose solutions to resolve internal and external technical issues related to the Packaging and Specialty Plastics business.
• Identify gaps of existing products and technology, help develop new products by working closely with R&D experts.

2. Interface with Customers

• Cultivate and maintain customer intimacy by interacting with customers on a regular basis. Work closely with sales counterparts to develop and solidify relationships with customers.
• Responsibilities include: visit customers, provide technical consultation and troubleshooting advice, coordinate test samples and results, documentation, technical presentation and lab results analysis.

Experience qualifications

• Master’s degree or above who graduate in 2024 or 2025, Major in Polymer Science and Engineering, Material Science, Chemistry, Chemical Engineering or other relevant disciplines.
• Proven track record of customer issue resolving and technical troubleshooting.
• Fundamental understanding in the general area of polymer science and engineering, e.g. polymer chemistry, polymer physics, polymer processing and rheology, polymer characterization etc.
• Research Experience on plastic film or sheet formulation, process and application in packaging materials will be preferred.
• This role requires good English reading, writing and speaking. Chinese and Bahasa capability is a plus.

Soft skills qualifications

• Self motivated, proactive and confident. Possesses customer-oriented mentality. Can-do attitude.
• Can drive a project from beginning to the end under proposed time frame. Can set timeline and prioritize multiple projects.
• Strong interpersonal skills. Work comfortably in a team setting. Able to motivate and positively influence team members.
• Good writing and presentation skills.
• Travel about 30% of work time.

Dow will assist candidate to apply Singapore Work Pass if required but result subjects to Singapore MoM's review.

Gradiant is a global solutions provider and developer of cleantech water projects with a concentrated focus on industrial water solutions, water reuse, waste minimization, Minimum Liquid Discharge (MLD), Zero Liquid Discharge (ZLD), and resource recovery of precious metals and minerals. Our workforce, exceeding 1200 dedicated global employees, operates under the umbrella of Gradiant Corporation, based in USA, and regional headquarters, Gradiant International Holdings, located in Singapore, alongside 23 offices spanning across sixteen countries. We take pride in our Global R&D Innovation Centre based in Singapore, which stands at the forefront of technological and environmental advancements.

Job scope:

· Engineering and design execution for water and wastewater treatment projects globally.

· Working as a Project Engineering Manager in the engineering department, the incumbent shall primarily work directly on performing engineering functions related to the project business under the direction of the Head of Engineering.

· Assist in the growth and development of engineering talent within the Engineering team by providing guidance to other engineering staff and contributing to regular, frequent knowledge sharing sessions.

· Ensure that engineering is completed accurately within schedule and budge

· Support the Engineering Manager in establishing, maintaining and applying procedures and protocols that will enhance the quality, efficiency and repeatability of engineering activities throughout the department

· Carry out value engineering assessments of all projects under the incumbent's control. Conduct technical analyses and feasibility studies and provide expert advice on process optimization and technology selection.

· Receive the basic process design from the proposals / sales team.

· Prepare / develop / supervise P&IDs, basic Engineering / design, detailed Engineering / design based on customer requirements

· Confirm compliance with customer specifications for equipment and material types.

· Prepare / supervise equipment/piping sizing calculation, equipment datasheets (valve lists/datasheet, equipment list/datasheets, piping schedule etc.), control descriptions/ valve sequence charts and operating manuals

· Carry out technical review of quotations for compliance with requirements

· Review fabrication drawings from external fabricators to ensure compliance with requirements.

· Collaborate with PMs, QA/QC, skid Fabricators and Construction Manager

· Oversee preparation of general arrangement drawings, piping detail drawings, skid arrangement drawings, Module arrangement drawings etc.

· Liaise with clients and customers on technical aspects, making justifications as necessary for design direction Participate in internal and external design reviews

· Coordinate / interface with various discipline

· Support during commissioning for the assigned projects and Manage Warranty Claims technical perspective.

· Ensure adherence to health, safety, and environmental policies and regulations throughout the project lifecycle.

Position requirement:

1. FORMAL EDUCATION:

· Bachelor’s degree/Post Graduate Diploma/Professional Degree in Engineering (Mechanical, Chemical or Environmental)

2. KNOWLEDGE & EXPERIENCE:

· Minimum 15 years’ experience in water or Process industry.

· Minimum 10 years’ experience in managing cross-functional engineering teams

· Proficiency in computer skills like MS Office software, AutoCAD, 3D models.

· Detail design of complex/ skid-based /module-based treatment / stick built systems/plants.

· Familiar with API, ASME, AWS, NACE and AWWA codes

· Excellent communication and interpersonal skills, with the ability to work effectively in a team environment and interact with all levels of management.

· Ability to travel as required for project needs.

· Experience working in a multicultural environment and in an international business.

3. TECHNICAL/SKILL REQUIREMENTS:

· Familiarity with various water treatment methods, technologies, and equipment.

· Knowledge of the design and engineering principles specific to water treatment facilities.

· Knowledge of the legal and regulatory framework related to water treatment, environmental standards,

What a System Quality Program Manager does at HP:

Manage Quality Programs:

• Lead quality assurance programs from initiation through closure, ensuring alignment with project scope, goals, and deliverables.
• Oversee all aspects of quality program management, including planning, budget and resource control.
• Conduct System At Glance Test, Workflow Duration Test, and Continuous Regression Test.
• Support priority test projects with direction, maintaining relationships with internal stakeholders and sharing information with testers via standardized reports and regular stand-up meetings.

Collaborate with Cross-Functional Teams:

• Work closely with cross-functional teams to define program requirements, identify risks, and ensure successful project execution within defined timelines, resources and budgets.

Execute Quality Assurance Plans:

• Define and manage comprehensive test plans to ensure HP Print ecosystem integration quality.
• Oversee test coverage, schedules, and resource adjustments to meet program objectives.

Monitor and Analyse Quality Metrics:

• Track quality metrics to ensure compliance with HP’s standards, conduct data analysis to identify improvement areas, and drive continuous improvement initiatives.
• Lead Data-Driven Decision Making.

Facilitate Communication:

• Act as a primary quality contact for stakeholders, communicating program status, risks, and escalations effectively.
• Prepare and maintain QA-related documentation, including test plans, test matrices, and testing reports.
• Provide regular updates and insights to senior management.

Encourage a Culture of Innovation and Continuous Improvement:

• Promote a collaborative environment, integrating new technologies and quality methodologies, and driving process enhancements.

Individuals who do well in this role at HP, usually possess:

• Four-year Degree in Computer Science, Software Engineering, Information Systems, Information Technology, or any other related discipline or commensurate work experience or demonstrated competence.
• Typically has 0-1 years of work experience, preferably in software quality assurance, test harnesses and QA focused tools, or a related field.
• Good to have skills and knowledge: Agile Methodology, CI/CD, Computer Science, JIRA, Scrum (Software Development), Software Development, Software Engineering, Software Quality (SQA/SQC), Software Testing.
• Test Planning, Knowledge in Quality and defect management.
• Any certifications are a plus: Project Management Professional (PMP) Certification, Lean Six Sigma Certification or equivalent quality certifications, Certified Quality Engineer (CQE), Certified Software Quality Engineer (CSQE), Certified Software Quality Engineer, Certified Associate in Software Quality (CASQ), Certified Software Test Engineer (CSTE).

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

What a Program Manager does in HP:

• Program Oversight & Coordination: Lead and manage a portfolio of programs across the Inkjet Supplies organization, ensuring consistent monitoring of milestones, deliverables, and timelines. Align program execution with strategic priorities, driving operational and business outcomes.
• Cross-Functional Collaboration: Serve as the key point of contact between various departments including project management, engineering, intellectual property, business analytics, marketing, and supply chain. Ensure smooth integration of efforts across functions to support overall business goals.
• Strategic Support: Assist in the formulation of strategic plans for operational excellence, portfolio optimization, and in-market implementation of hardware and supplies. Support in managing resource allocation and optimizing workflows.
• Performance Management: Track key performance indicators (KPIs) and objectives and key results (OKRs) for the department, ensuring adherence to timelines, budgets, and quality standards. Provide regular status updates to leadership.
• Issue Escalation & Resolution: Identify potential risks and issues in program execution, escalating as necessary and facilitating effective resolution. Work with senior leaders to remove roadblocks and ensure successful program outcomes.
• Stakeholder Engagement: Collaborate with senior leaders, outsourced partners, and suppliers to manage expectations around program deliverables, costs, and timelines. Ensure transparency and consistent communication with stakeholders.
• Process Improvement: Continuously seek opportunities to improve operational processes, support cost reduction initiatives, and implement best practices to enhance team efficiency and program success.
• Mentorship & Development: Work closely with team leads and managers, providing guidance, mentorship, and support for the development of team members. Contribute to fostering a performance-driven and collaborative culture across the organization.

Individuals who do well in this role at HP, usually possess:

• Bachelor's degree in Business, Engineering, or a related field (MBA preferred).
• Proven experience in program management or operational roles in a large matrixed organization.
• Strong leadership and influencing skills, with experience working directly with senior executives.
• Excellent project management skills, including the ability to manage multiple initiatives simultaneously.
• Ability to communicate complex ideas clearly and effectively across all levels of the organization.
• Strong business acumen with a focus on operational efficiency and strategic execution.

Disclaimer
• This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices globally.

Your Mission

This position is responsible for driving activities related to digital transformation as a member of the Program Management Office at HMGICS. The role involves developing revenue generation and operational models for training, advisory, and solutions focused on digital transformation and new manufacturing technologies. Additionally, the position will serve as the junior chief of staff to the Chief Innovation Officer, with the potential to assume full responsibilities within the short-term, based on performance.

What To Expect

[1. PMO Member for Digital Transformation - 20%]

• Help define and enforce agile work processes to continually improve the velocity and impact of digital transformation activities undertaken by the relevant technology and manufacturing squads. As a member of the PMO squad serving Digital Transformation, this involves applying core technologies such as IoT, AI/ML/LLM, simulation, and automation to enhance operational performance.
• Engage with all relevant stakeholders within and outside HMGICS to develop insights that accelerate digital transformation.

[2. Revenue Generation and Operational Models - 50%]

Develop new revenue generation and operational models for HMGICS based on core capabilities. This may include, but is not limited to:

• Learning and training programs on Digital Transformation, e.g., for other manufacturing companies.
• Advisory and technology consulting services to assist companies in adopting digital transformation.
• Provision of core technology solutions.
• Other initiatives within the Hyundai Motor Group.

[3. Junior Chief of Staff - 30%]

Assist the Chief of Staff to the Chief Innovation Officer (CIO), with the goal of becoming the full Chief of Staff within 1-2 years:

• Actively manage the CIO Organization’s activities, time, and priorities to maximize impact and ensure the achievement of HMGICS's core objectives.
• Prepare briefing materials, presentations, and reports for executive meetings and communications on behalf of the CIO.
• Develop strong relationships with senior stakeholders within HMGICS, the Hyundai Motor Group, and external partners, with the aim of overseeing and coordinating cross-functional initiatives, particularly those related to Mission 2.
• Grow into a trusted advisor and thought partner for the CIO, providing insights and recommendations on critical decisions.
• Handle confidential and sensitive information with the utmost discretion.

What You'll Bring

• Bachelor's degree in Engineering (preferred); MBA is a plus.
• Minimum of 2 years of experience at a top-tier management consulting firm, with strong references.
• Technical expertise in process innovation and business consulting projects.
• Extensive project experience in digital transformation, capability building, and new business models.
• Exposure to the technology or automotive industries.
• Advanced proficiency in MS Office and MS PowerBI.
• Passion for the future mobility industry and a desire for accelerated growth within the organization.
• Strong interest in and familiarity with technology innovation and future tech trends, as well as business model creation.
• Inquisitive mindset with a focus on continuous improvement through innovative thinking and structured problem-solving.
• Fluent in English; proficiency in Korean is a plus.

RESPONSIBILITIES

• The Technical Service Manager focuses foremost on supporting customers (expectation approx. 75% of time). The function, together with Sales, initiates and executes Initiatives and Projects with customers that deliver on contribution targets within the current FY and prioritizes those projects to deliver sales 2 – 3 years beyond the current FY. Technical Service is therefore, together with Sales, the execution arm of Oil Additives (OA) for contribution margin achievement.
• Is pivotal player in increasing business development through technical marketing and strengthening technical contacts with target accounts.
• Together with Sales Manager, establishes and develops deep connections / relations to key functions & persons at customers, enabling high level, strategic management partnerships between Evonik and the customer. The role understands competitive challenges, specifically competitor’s technology and value proposition.
• Together with Marketing, articulates the value drivers for areas of application at specific Customers / Markets and translates these into Initiatives / Projects (e.g. to generate technical marketing data considering local needs).
• Executes the technical aspects of the Project to achieve the Project goal, both within OA's functional groups (TS, R&D, etc.) and at customers / 3rd parties. Has full technical responsible for formulation modification projects and liaises with Innovation as follows: initiates “smaller” polymer modification projects, interfaces with Perf Test Lab for test results on formulations, acts as key stakeholder in major R&D initiatives and projects. Interacts with Innovation to translate the technical performance of the product (in terms of Tribology, performance testing, viscometrics) into a value-based solution for the customer.
• Together with Sales, executes the commercial realization of new products / services (either from Evonik R&D, 3rd parties, or jointly via collaboration with customers).
• Supports manufacturing for quality issues that impact product specifications or performance, raw material substitutions, customer requested changes, etc.; consults with production and sales on technical customer complaints
• Possesses detailed application expertise on Evonik’s products / services for individual market segments, and an awareness of development projects and initiatives with OEMS (that impact on existing / market base) – the role understands and articulates current and future trends at existing customers / markets, and effectively communicates this within OA.
• Educates OA / customers / markets on OA technologies for areas of application, is involved with industry committees in which direct customers are involved, awareness on IP landscape on formulations and applications and protects / generates IP applicable for OA , and collaborates with Universities / 3rd parties on Tribology application research linked to existing customers / markets (and translates this back to customer specific Initiatives / Projects).
• Strengthen technical contacts to key regional accounts & target OEM’s.
• Participate in technical discussion with OEM customers by understanding their requirements from product development.
• Initiate lab projects / blend studies to recommend suitable products to improve formulations for customers.

REQUIREMENTS

• Bachelor’s or Master’s in Chemical / Mechanical Engineering with 6 to 8 years of experience in technical service
• Effective user of IT tools and techniques for organizing the working environment and oneself
• Excellent IT-capabilities (Microsoft Office, SAP, etc.)
• Ability to function within varied cultural groups
• Willingness to move geographically and organizationally
• Excellent interpersonal and communication skills
• Good analytical and problem solving skills
• Team player and able to work independently
• Ability to travel as required based on business needs