Total 2,536 Information Technology job vacancies in client site sgp singapore 14 tuas ave 1

JOB DESCRIPTION

· Understanding of the customer requirements and developing technical solutions for customers.

· Strong collaboration with several stockholders including customer, sales and marketing, RD team.

· Support customers during the all development cycle from design specification until mass production.

· Exposure to schematics and PCB layout design review.

· Direct contact with customers implies excellent communication skills.

JOB REQUIREMENTS

· Bachelor’s degree or above in Electronic Engineering or related majors

· Min 3-5 years of relevant work experience in semiconductor

. Must has outstanding hardware and RF bring-up experience for WLAN + BT combo, as well as best expertise of OFDM/OFDMA, MIMO, RF component knowledge and front-end matching.

. Proficient with multiple tools for board design, such as OrCAD, Allegro, impedance calculation, ADS simulation and other RF/digital simulation on board level.

. Strong communication and interpersonal skills to handle whole board design process, debug critical issue, optimize RF matching, decent documentation technique.

· Familiar with Litepoint IQxel tester, R&S CMW tester, spectrum analyzer, signal generator, network analyzer, power meter, attenuator, and other WLAN/BT test equipment is an advantage.

· Strong customer management and problem-solving skills

· Good communication and team working skills

· Singaporeans are welcome to apply

JOB DESCRIPTION

· Define the architecture and design specification for in house video encoder and decoder, according to market requirement.

· Make assessment of the video encoder quality, either in house design or licensed IP.

· Work with IC design team to resolve the issues during design phase.

· Create test plan for the video encoder and decoder and qualify the design.

· Work with software team to develop the driver for the video encoder and decoder.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with IC design background

· Familiar with video compression technology, such as MPEG4, H264, H265, MPEG5, etc.

· Familiar with video quality assessment.

· Familiar with video encoding algorithm and video decoding compliance test.

· Familiar with architecture of video encoder and decoder RTL design.

· Knowledge in video/image pre and post processing is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Responsibilities:

• Execute service and maintenance workflows efficiently.
• Coordinate with client representatives on all service/maintenance matters.
• Assist the supervisor in organizing teams for service tasks and delegating responsibilities.
• Manage daily client interactions, ensuring their expectations are met.
• Support the supervisor in troubleshooting and timely completion of security system services.
• Understand each client's business to ensure high customer satisfaction.
• Ensure all work complies with Workplace Safety and Health Act regulations.

Requirements:

• Minimum Nitec in Electrical/Electronic Engineering.
• At least 2 years of working experience in related field.
• Requires knowledge and practical experience with security systems (e.g., Integrated Security Management, Card Access Control, Intrusion Detection, and CCTV systems).
• IT/Network/Server knowledge is a plus.
• Transport allowance provided.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

Internal Code: A24124

What will you do?

We are seeking a highly skilled and motivated Senior Software Quality Assurance Engineer to join our dynamic tech team.

In this role, you will be instrumental in ensuring the quality and reliability of our platform, working closely with cross-functional teams to implement robust testing strategies and drive continuous improvement in our development processes.

Test Strategy and Planning:

• Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.
• Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

• Lead the development of automated testing frameworks using Cypress/Playwright for end-to-end testing.
• Implement performance and load testing using tools like Gatling, K6, and Autocannon to ensure platform scalability.

Quality Assurance:

• Conduct contract testing with Pact.js to validate interactions between microservices.
• Perform thorough regression testing when bugs are resolved and new features are implemented.
• Collaborate with developers to ensure code quality and adherence to best practices.
• Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking or delays.

Cross-Functional Collaboration:

• Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.
• Participate in agile ceremonies, providing QA insights and contributing to sprint planning.
• Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

• Identify, document, and track software defects using industry-standard tools.
• Conduct root cause analysis for critical issues and implement corrective actions.
• Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

• Mentor junior QA engineers, fostering a culture of quality and continuous improvement.
• Stay updated with emerging QA technologies and methodologies, introducing relevant innovations to the team.

What are we looking for?

• Bachelor's degree in Computer Science, Software Engineering, or a related field.
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Responsibilities:

• Pre-commissioning of equipment
• Commissioning / Test Performance of Mechanical / Process Systems and Subsystems
• Issue Subsystem and Performance Reports
• Participate in meetings with the client

Requirements:

• Min. 2 years years of commissioning experience in the Oil & Gas/ Wind Farm industry
• Experience in commissioning of Mechanical / Process Systems and Subsystems
• Good knowledge and experience in commissioning activities of oil and gas/ wind farm facilities
• Good analytical, problem solving and planning skills.
• Familiar with Project Specifications, Technical and HSE Standards
• Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Working hours

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

JOB HIGHLIGHTS

· Cutting Edge Internet-of-Things and AI Technologies

· Open Source and Maker Culture

· Friendly Working Environment

JOB DESCRIPTION

· Realtek is one of the leading fabless semiconductor design companies in the world, with this position, you will get to play a role in value-add to the latest Realtek wireless communication IC product line.

· You will develop software and firmware for the state-of-the-art Internet-of-Things microcontrollers, writing tools, automation, and build systems.

· You will also work closely with the hardware, driver, test, and marketing team to be exposed to the entire product designing cycle.

· You will have the chance to prototype your ideas and make them public through social media, workshops, and events.

· You will be able to follow the latest tech trend and learn new skills when working with cutting-edge technologies.

ROLES & RESPONSIBILITIES

· Be a part of a team that maintains, implements, and validates embedded software for Realtek's latest IoT SoCs

· Design application-level middleware to simplify the customer development process

· Port new features, capabilities, and platforms to Realtek IoT SoCs

· Prototype innovative IoT applications using various network protocols, tools, and open source software

· Debug and fix peripheral, wireless connectivity(Bluetooth, Wi-Fi, etc.), and network-level issues

· Collaborate with third parties for hardware and software projects (ARM, SeeedStudio, Sparkfun, Adafruit, AI-Thinker...)

· Online & offline event organization with groups, institutes, and local universities

· Content creation and social media marketing strategy based on Realtek IoT solutions

· Community management and customer support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electrical Engineering, or other related majors

· Fresh graduates are welcome to apply

· Experience with C/C++ and a scripting language(Python/Bash/etc.) is a must

· Experience with embedded system drivers, peripherals, computer networks, wireless connectivities, and open source development platforms (Arduino, PlatformIO, etc.)

· Experience with TinyML and/or AIoT-related development is a bonus

· Experience with video editing and content creation

· Willingness to learn new technologies and ability to follow the latest software and electronics trend

· Good Communication and Teamwork Skills

The Technical Manager Service is responsible for the handling of all technical aspects of the service activities of the Company, in particular:

• Technical support of commercial service personnel and customers directly
• Service support, including commissioning of new equipment, repairs, modifications, warranty repairs
• Handling of warranty matters with customers and vendors in conjunction with the commercial manager service and 3rd parties such as classification,Societies and outside contractors
• Managing the workshop
• Managing a team of service engineers
• Support service engineers and customers with technical expertise
• Organising training and education of in-house and 3rd party personnel

In order to carry out these tasks, the Technical Manager Service

• Manages and maintains the company’s workshop
• Plans and manages the company’s equipment
• Supervises the company’s service personnel
• Coordinates activities with the company’s sales and service personnel

The Technical Service Manager should provide:

• the ability to approach and develop the After Sales Market for the company in accordance with the Company’s targets and policies
• good communication skills representing the company with customers, vendors and other organizations
• detailed and deep technical knowledge of the company systems and products
• good organizational skills in planning of service activities
• the ability to develop personnel

The Technical Manager Service participates in the planning of the relevant budgets

The position reports to the General Manager - service of the Company.

Job Responsibilities

• Perform programming and troubleshooting on cnc machines
• Set-up and operate DMU60-eVo > CNC Milling High End Machine (5 Axis)
• Set-up and operate Mazak Integrex e-420H-II > CNC Turning & Milling Machine (5 Axis) such as Multitask CNC Machine
• Programming and drawing using Mastercam 2018 software on 3D and 5 Axis

Requirements:

• Prefer with experience in operating (DMG) DMU60-eVo CNC milling 5 Axis machine
• Prefer with experience in operating Mazak Integrex e-420H-II CNC turning & milling 5 Axis machine
• Able to read and understand all types of engineering drawing
• Knowledge of Mastercam 2018 software
• Experience in Funac control and Mazaktrol control an added advantage

Other Information:

• Company transport at Gul Circle MRT & Choa Chu Kang MRT

Responsibilities:

• To supervise and support the functions of incoming waste segregation including bulk waste and loose waste as well as weighbridge.
• To constantly monitor improve the department performance. To conduct periodic review of existing work flows and procedures, and make recommendations for improvements and executing the improvement plans.
• To supervise and ensure the effectiveness and smoothness of waste unloading, segregation and distribution.
• Daily and regular inspection of the plant processes and monitor the working area 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
• Ensure incoming waste streams being checked properly for suitable treatment processes and current safe work procedures are suitable for handling by operation staff.
• As the core coordinator, lead and monitor the communication flow among internal departments on incoming waste discrepancy and revise related SOPs accordingly.
• To implement and supervise correct EHS practices within the department.rnal departments on incoming waste discrepancy and revise related SOPs accordingly.ent.
• To implement and supervise correct EHS practices within the department.
• To work with resale for arrangement of recovered products to minimize the storage.
• To prepare and analyze daily and monthly operation records/reports (e.g., cost, productivity, quality, nonconformance, etc) on plant processing and maintenance. And follow up necessary corrective actions and monitor consistently to relevant department staffs to follow up closely.
• Regular briefing / training to be conducted to department staffs for safety handling of high flammable solvent, MSDS, PPE requirement and risk assessment before operations.
• To activate emergency response team of operation and maintenance staffs and response to any in house spill and fire incident if in case of emergency situation. To liaise with EHS department to ensure fellow dept staff are upkeep with method of handling and emergency equipment usages in terms of spills and fire incident and to conduct regular practice and drill exercises with different scenarios to workers so that they are well familiar in emergency to response in time.
• To ensure all fellow staffs are well trained according to OJT program and ensure they can follow up SOPs and work safely.

Secondary responsibilities

• To undertake any other tasks assigned by the Management from time to time.
• As an ISO committee member, to develop and implement documents for operation procedures, such as SOP, RA and MOC, SWP and participate in auditing the various departments as an Internal Auditor

Requirements:

• Degree in Engineering or Chemistry
• At least 2 years relevant experience
• No colour blindness

Remuneration:

• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• Sign-on bonus
• AWS & Variable bonus

You're a Software Engineer with excellent technical, communication, and organizational skills, combined with deep software knowledge on C#, C++ and VB.

Responsibilities

• Software development for Industrial Automation Machines using C# Visual Basic, C++

• Liaise with customers on machine specification.

• Evaluate and implement other possible system for machine programming.

• Test and troubleshoot machines.

• Conduct machine training.

Requirements

• Degree/ Diploma in Electrical Engineering/ Computer Science.

• Developing software for Windows-based applications.

• Experience in designing Automated machine is an added advantage.

• Proficiency in C# language.

• Knowledge of C++ and Visual Basic language.

• Ability to work under tight deadlines and self-motivated.

• Problem solving/ troubleshooting skills.

• Initiative and able to work independently.

• Good coordination/ communication/ presentation skills.

• Good command of English.

Job Responsibilities

System Maintenance and Configuration:

• Install, configure, and maintain hardware and software for the organization’s infrastructure.
• Monitor system performance to ensure everything runs smoothly and securely.
• Regularly update systems to provide necessary patches and upgrades.

Network Management:

• Manage network servers and technology tools.
• Set up user accounts and workstations.
• Monitor network performance and integrity.

Security:

• Ensure security through access controls, backups, and firewalls.
• Frequently review security protocols and make adjustments as needed.
• Respond to and resolve help desk requests.

Data Management:

• Oversee data storage solutions and database systems.
• Ensure data recovery and backup procedures are in place and functioning correctly.
• Manage and store backups.

Troubleshooting and Support:

• Troubleshoot issues and outages.
• Upgrade systems with new releases and models.
• Provide technical support and training to other employees.

Documentation and Policy Development:

• Develop expertise to train staff on new technologies.
• Build an internal wiki with technical documentation, manuals, and IT policies.
• Document system performance and plan for future upgrades.

Collaboration and Communication:

• Work closely with IT project managers and other technical staff.
• Collaborate with other departments to understand their technical needs and implement IT solutions.
• Report regularly on operation status.

Job Requirements

• Degree/Diploma in Computer Science/Information Technology.
• Basic knowledge of computer networks/infrastructure.
• Strong analytical and problem-solving skills.
• Good understanding and possess troubleshooting know-how on IT infrastructure and software.
• Able to handle sensitive information confidentially.
• Minimum 2 years of experience in a similar field.
• Strong knowledge of MS 365 and Azure.

Job Description

· Procurement and sales

· Source & procure equipment/ components/ spares, etc.

· Vendor evaluation and registration

· Prepare purchase requisitions

· Price negotiations

· Prepare sales contracts

· Prepare shipping documents

· Management of supplier and client relationships

· Resolve issues related to requirements, substitutions, damages, quality, delivery and other important terms and conditions.

· Ensure accurate and timely payment for invoices

· After sales service

Job Requirements

· Candidate must possess a Diploma in Engineering or Business Admin with at least 5 year(s) of relevant experience in Marine/ Shipyard.

· Strong communication negotiation and interpersonal skill

· Bilingual in English and Mandarin

· Proficient in Microsoft Office applications (Outlook, Excel, Words and Powerpoint, etc.)

Roles & Responsibilities

• Prepares documentation and substantiation for measurement, cost plus and adjustable items as per claim requirements
• Works closely with Engineering, procurement & subcontract teams to support timely contract price adjustment
• Analyses, quantifies and prepares the material and quantity of work scope and record into database for managing of material and cost
• Tracks changes to design and construction work, measure and value work done
• Manages full spectrum of respective subcontracting works, claims and measurement / bill of quantities
• Prepares tender document, bid checklist, secure bid and prepare bid evaluation and summary
• Prepares progress claims on timely manner
• Monitors, reviews and checks subcontractor claims and invoice on timely manner
• Manages, prepares variation order and carry over work
• Performs cost control, cost analysis and reporting
• Any other assigned ad‐hoc duties. Requirements:
• Degree / Diploma in any Engineering disciplines
• Minimum 3 years of experience in quantity surveying
• Familiar with offshore platforms, modules, FPSOs, jackets, etc. and onshore petrochemical plants will be an added advantage
• Good team player and able to work independently with minimal supervision
• Willing to commit overtime as and when required

Roles & Responsibilities

• Manage change order/ variation claim from subcontractors and prepare change order/ in support of variation order claims to client, and keeping track of all change orders.
• Work closely with Project teams/ various disciplines (Engineering, Construction, Procurement, Subcontractors, etc.) and coordinate the timely contract price adjustment/ claims including internal reviews/ approvals
• Manage full spectrum of respective subcontracting works, measurement/ bill of quantities, cost plus and adjustable items as per claim requirements.
• Works closely with all stakeholders include procurement teams to support timely contract price adjustment
• Ensures all POs and WOs and payments flow from procurement & subcontractor team into the Project Cost Code system
• Prepare tender/ subcontract document, bid/ subcontract checklist and prepare bid/subcontract evaluation and summary
• Ensure main contract terms, project specification and requirements are incorporated in the bid documents and subcontract document
• Monitor, review and check subcontractors’ milestone/progress claims and invoice on timely manner, and coordination with internal cost control/ finance department for payment processing
• Manage/ administer the subcontracts with subcontractors
• Issue work order
• Organise kick off meeting and other ad‐hoc meetings with subcontractors
• Handle and maintain performance securities with subcontractors
• Manage day to day contractual correspondences with subcontracts including contractual letters preparation and tracking of incoming/outgoing letters
• Procure all subcontracting work within budget and in accordance to comply financial guideline
• Monitor subcontracting cost and ensure within allocated budget
• Finalises project final accounts settlement with subcontractors and close out
• Participate in monthly cost review, if required. Manage warranty/ defect claims if any
• Participate in Project meetings, interface with cost control, procurement and others.
• Ad hoc assignment

Requirements:

• Degree in any Engineering disciplines
• 3‐5 years of experience in contracts administration
• Familiar with offshore platforms, modules, FPSOs, jackets, etc. and onshore petrochemical plants will be an added advantage
• Good team player and able to work independently with minimal supervision
• Willing to commit overtime as and when required

We are looking for multiple seasoned Senior and Staff System Engineers to grow an Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

Deliveries:

• Neural Network Processor (NPU) architecture, programming Model, simulation, verification, profiling and optimization
• Specification, review and verification of other IP blocks
• FPGA images and IO boards for pre-silicon verification and design exploration
• Boot ROM, bare metal BSPs, sample applications

Responsibilities:

• Support Inference Engine, Toolchain and ASIC teams on NPU
• Constantly improve productivity through automation in all areas

Skills:

• Strong ANSI C bare-metal design, implementation, optimization and debugging using GCC-like toolchains
• Strong processor architecture knowledge: ARM/RISC-V ISA, symmetric multiprocessing, cache architecture, SIMD, Vector Processing, custom instructions
• Strong software, hardware and FPGA debugging capability
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc
• Familiarity with

o Python for prototyping, demo, verification and/or automation

o OS: GNU/Linux, proprietary RTOS, Bare metal

The following will be advantageous:

• Detailed and comprehensive understanding of TinyML (e.g. TensorFlow Lite for MCUs), from training, quantization through to operator execution, optimizing for power, performance, and size.

Requirements:

1. Ph.D/MSEE/BSEE in Electrical Engineering, Computer Science or Computer Engineering
2. At least 5 years of commercial embedded system architecture and development experience.

The Air Traffic Management Research Institute (ATMRI) is the first institute in Singapore to be entirely dedicated to Air Traffic Management research. As part of its agenda for innovation, it is seeking to recruit a Research Engineer to work on the AI-Assisted ATFM project, to deliver an operationally ready prototype of an AI enabled ATFM system. This job will be responsible for contributing to the research transition into development, by documenting existing AI tools, including those designed by ATMRI researchers, and integrate them into operational software development.

Key Responsibilities:

• Interpret research papers and program, for conversion into applicable software development. Develop a vision for transforming research papers into technologies ready for deployment.
• Design and develop the front and backend of the applied research, for operational use. Work closely with the researchers and stakeholders to design a user-centric, ready for development software that emphasizes the benefits for end-users.
• Rigorously document every aspect of the software development, for integration into industrial development.
• Participate in meetings and workshops with fellow researchers and stakeholder partners to discuss the future directions for research and development.

Job Requirements:

• Bachelor / Master of Engineering in Computer Science or a related field.
• Impeccable English writing and communication skills
• 1+ year experience in industrial software development
• Experience in the development of APIs, UI, authentication and actualization systems, with proficiency in several programming languages (Python, Java, C++…)
• Industrial or operational prior experience in air traffic services is a plus.

We regret that only shortlisted candidates will be notified.

Position Overview:

As a Full Stack Software Developer, you will be responsible for the design, development, and maintenance of our web applications and systems using Angular v13 and above, HTML, CSS, JavaScript, Entity Framework, C#, .Net Core, .Net Framework, MS SQL, and RESTful Web API. You will work collaboratively with cross-functional teams to implement new features, optimize existing systems, and ensure the highest level of software quality. Additionally, you will play a crucial role in understanding system requirements, workflow, and functions as communicated by the project manager and team lead.

Key Responsibilities:

1. Full Stack Development: Develop web applications, including front-end and back-end development, database design, and integration with third-party services, using ReactJS and/or Angular v13 and above, HTML, CSS, JavaScript, Entity Framework, C#, .Net Core, .Net Framework, MS SQL, and RESTful Web API.

2. Understanding System Requirements: Collaborate with the project manager and team lead to comprehensively understand system requirements, workflow, and functions, ensuring alignment with development efforts.

3. Collaboration: Work closely with product managers, designers, and other stakeholders to understand project requirements and deliver high-quality solutions.

4. Code Review: Participate in code reviews to maintain code quality, identify areas for improvement, and ensure adherence to coding standards.

5. Testing and Debugging: Write unit tests and conduct testing and debugging to ensure the reliability and performance of applications.

6. Documentation: Create and maintain technical documentation, including system architecture, API documentation, and code comments.

7. Continuous Improvement: Stay updated on industry trends, emerging technologies, and best practices to recommend improvements within the development team.

8. System Maintenance and Enhancement: Contribute to the maintenance and enhancement of existing system solutions, addressing issues and implementing new features as required.

9. Security: Implement and maintain security best practices to protect against potential vulnerabilities and threats.

Qualifications:

· Tertiary qualification in Computer Science, Information System, Computer Engineering or a related field.

· At least 5 years of professional experience as a Full Stack Developer with expertise in ReactJS and/or Angular v13 and above, HTML, CSS, JavaScript, Entity Framework, C#, .Net Core, .Net Framework, MS SQL, and RESTful Web API.

· Proficiency in front-end technologies such as ReactJS and/or Angular v13 and above, HTML, CSS, and JavaScript.

· Proficiency in back-end development using Entity Framework, C#, .Net Core, .Net Framework, MS SQL, and RESTful Web API.

· Solid understanding of databases, both SQL and NoSQL.

· Experience with version control systems (e.g., Git).

· Knowledge of containerization and orchestration technologies (e.g., Docker, Kubernetes) is a plus.

· Familiarity with cloud platforms (e.g., AWS, Azure, GCP) is a plus.

· Experience in Inventory Management System, Warehouse Management System and SAP is a plus.

· Excellent problem-solving and communication skills.

· Ability to work effectively in a collaborative team environment.

Job Description:

• Integrate and install auto-mechanical/ electrical/ electronic subcomponents /robot/equipment according to process instructions
• Carry out calibration/acceptance test on sub-systems/robot/vehicle/equipment according to process instructions
• Perform functional checks, setting, testing, fault finding and failure analysis
• Service and troubleshoot of Auto-mechanical / Electronics / Electrical control system

Job Requirements:

• Minimum qualification of NITEC in Mechatronics/Electronics/ Electrical/Robotics & Smart Systems or related discipline
• Candidates with 2 to 3 years’ experience in automotive or relevant industrial experience will also be considered
• Perform troubleshooting and fault analysis on Hydraulic/Pneumatic/ Electronics/ Electrical systems
• Basic understanding of electrical/electronic circuit
• Able to perform analytical and diagnostics with measuring equipment like Digital Meter & Scope
• Advantage with class 3 driving licence
• Willing to travel overseas

Job Description

We are looking for multiple seasoned Senior and Staff Software Engineers to grow an Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

Deliveries:

• Neural Network Inference libraries, drivers and sample applications
• Boot ROM, RTOS/OS BSP and platform SDKs and sample application
• SoC IP programming models

Responsibilities:

• Develop various features of deliverables
• Solution profiling, optimization and benchmarking
• Support internal developers directly and customers through FAEs
• Ensure compliance as required e.g.ASPICE, MISRA C, Coverity, BlackDuck
• System architecture, verification and validation of ASIC IPs
• Constantly improve productivity through automation in all areas

Skills:

• Strong ANSI C design, implementation, optimization and debugging using GCC-like toolchains
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc
• Familiarity with
• Python for prototyping, demo, verification and/or automation
• OS: GNU/Linux, proprietary RTOS, Bare metal
• Processor architectures: ARM/RISC-V symmetric multiprocessing with cache & internal buses, SIMD, Vector Processing
• Debugging tools: gdb, simulators, emulators, JTAG, Oscilloscope, Logic Analyzers

Any of the following will be advantageous:

• Detailed and comprehensive understanding of TinyML (e.g. TensorFlow Lite for MCUs), from training, quantization through to operator execution, optimizing for power, performance, and size.
• FPGA and hardware interfacing and debugging

Requirements:

1. Ph.D/MSEE/BSEE in Electrical Engineering, Computer Science or Computer Engineering
2. At least 5 years of commercial embedded development experience.

Roles & Responsibilities

Job Scope:

• Manage all the variation claims with Client and coordinate with JV partner and internal stakeholders including preparation of documentation, substantiation as per contract requirements, timely submission, meeting coordination and follow up till the conclusion of each variation/ claim.
• Manage change order/ variation claim from subcontractors and prepare change order/ in support of variation order claims to client, and keeping track of all change orders
• Work closely with Project teams/ various disciplines (Engineering, Construction, Procurement, Subcontractors, etc.) and coordinate the timely contract price adjustment/ claims including internal reviews/ approvals
• Manage full spectrum of respective subcontracting works, measurement/ bill of quantities, cost plus and adjustable items as per claim requirements.
• Prepare tender/ subcontract document, bid/ subcontract checklist and prepare bid/subcontract evaluation and summary
• Ensure main contract terms, project specification and requirements are incorporated in the bid documents and subcontract document
• Monitor, review and check subcontractors’ milestone/progress claims and invoice on timely manner, and coordination with internal cost control/ finance department for payment processing
• Manage/ administer the subcontracts with subcontractors
• Issue work order
• Organise kick off meeting and other ad-hoc meetings with subcontractors
• Handle and maintain performance securities with subcontractors
• Manage day to day contractual correspondences with subcontracts including contractual letters preparation and tracking of incoming/outgoing letters
• Procure all subcontracting work within budget and in accordance to comply financial guideline
• Monitor subcontracting cost and ensure within allocated budget
• Subcontract close out / settlement of contractual disputes related to subcontracts, final accounting, completion certificate, etc.
• Participate in monthly cost review, if required. Manage warranty/ defect claims if any.
• Participate in Project meetings, interface with cost control, procurement and others
• Ad hoc assignment

Requirements:

• Degree / Diploma in any Engineering disciplines or Quantity Surveying.
• 5 to 10 years of experiences in contract / claim administration
• Familiar with offshore platforms, modules, FPSOs, jackets, etc. and onshore petrochemical plants, renewable energy era will be an added advantage
• Good team player and able to work independently with minimal supervision
• Willing to commit overtime as and when required

As a member of the QA team, you will support the team in the implementation of the Company Wide Quality Strategy to exceed customer expectations for product quality, logistics and cost. You are responsible to support A & One’s best-in-class quality assurance and controls management systems. You are required to deliver on all required key performance indicators and drive continuous improvement across all quality functions to achieve operational excellence.

1. Manage the entire customer lifecycle, serving as customers key account managers from the first touchpoint to on-time delivery.

2. Provide technical support in sales presentations, briefings, product demonstrations.

3. Participate in monthly sales team reviews to update on the learnings and challenges.

4. Conduct pre-sales and/or post-sales technical consulting activities.

5. Coordinate client needs with various internal resources and teams.

6. Stay up to date on technology news, including trends, product roadmaps, market conditions, etc.

7. Achieve sales objectives and identify business opportunities.

8. Develop relationships with new prospects by leveraging personal and business networks.

9. Responsible for answering sales inquiries from both local and international sales markets.

10. Lead technical discussions in client meetings across multiple levels and disciplines to identify business and technical needs, issues and priorities.

11. Present project status internally and leads communication between the project team and its stakeholders.

12. Target the right clients, grow quality pipeline, win profitable deals and manage sales activities with the objective of creating mutually beneficial, trust-based relationships that create value.

13. Manage sales campaigns for top opportunities in the precision engineering domain and will be responsible for day-to-day campaign management, with emphasis on opportunity qualification, win strategy definition/execution, proposal development, orals presentation, and support of contract negotiations.

14. Act as point of contact for resolution and escalation of all key items with the client and internally.

15. Provide solutions to complex business problems for area(s) of responsibility where analysis of situations requires an in-depth knowledge of organizational objectives.

16. Collaborate with operations department and other cross-functional teams to ensure on-time delivery and zero defects to achieve 100% customer satisfaction

Requirements

Education

· Min Diploma/Degree in Mechanical, Electrical, Electronics, or Chemical Engineering

Mandatory Experience

· 3 to 5 years of quality management experience in precision engineering, contract manufacturing of complex semiconductor equipment, or wafer fab environment.

· Proficiency and knowledge in CMM Programming, measurement and calibration equipment

· Knowledge of quality systems

· Knowledge and Experience in Surface Treatment

· Experience in writing non-conformance and corrective actions reports (e.g. 8D, F23, NCR) for customers

· Experience in the processes and report writing for New Product Introduction (NPI), Prototype and First Article (FA)

· Enjoys solving complex challenges with exceptional internal and cross departmental team communication and management experience

· Proficiency in both English and Chinese to write, communicate and translate amongst non-English speaking team members

Good to Have

· Experience in using Microsoft Enterprise Resource Planning System Navision

· Basic understanding of precision engineering product drawings, blueprints and treatment specifications.

• Provide pre-sales technical support to propose cost competitive system design solution based on tender spec & customer requirement
• Design solutions for Access Control, CCTV, Public Address, Emergency Voice Communication, Fire Alarm, Integrated Security Management and other necessary system as deemed required by the prospective customer / project (90 %)
• Foundational understanding of IT and Network systems will be necessary in design and technical assessments.
• Knowledge of Cyber-security issues and solutions will be an advantage.
• Review technical specification, system schematic, floor-plan drawings documents
• Provide system proposal and design that meet requirements & be cost competitive
• Manage the technical Compliance Appraisal, prepare Bill of Quantities and system write-up for the designed systems
• Manage Installation Work Appraisal (Scope of Work for installation)
• Prepare technical document submissions & product sourcing
• Support technical meeting with customers, end-users, consultants & vendors etc
• Demonstrate systems / products performance to clients and staffs
• Collaborate with sales, purchase & admin teams to meet tender submission date in time
• Product evaluation & POC support on potential system
• Report various system job request status with respect to milestone schedule to Section Head and all technical problem hindering system design progress

Cut tiles and shape them properly to ensure they fit around obstacles and in tight corners and odd spaces using power and hand tools

Form tile beds using concrete, plaster, mastic, cement, glue or mortar utilizing tools such as screeds, brushes and trowels

Align tiles and straighten them with straightedges, levels and squares to ensure patterns are even and precise

Cut, install, polish and surface granite and marble and ensure accuracy during the installation process for lasting results

Prepare various surfaces for tiling with waterproofing material or lath and by cleaning the surfaces properly

Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms

Tap tiles into place carefully using tools to properly adhere tiles to the base, making sure not to break or damage tiles

Follow blueprints precisely and mark and measure surfaces that need to be tiled to determine how to go about jobs

Halliburton invites qualified candidates to apply for the Software Engineer position.

The Software Engineer will leverage his/her strong software design and programming skills to provide technical leadership and build software solutions to address complex business needs.

Responsibilities

• Design and develop professional quality desktop applications in an agile environment
• Perform analysis to define system scope and objectives in order to develop and/or modify existing engineering applications
• Ensure the Technical Software Development process is optimized and projects are on track
• Define requirements, functional specifications, and testing documentation for various engineering software applications
• Design and develop unit test for code validation and automated regression testing of overall systems validation
• Incorporate lab testing and field testing with various cross-functional teams
• Job role contributes to value creation

Required Education and Skills

1. Bachelor’s degree in Computer Engineering or Computer Science
2. Minimum 3 years of related experience in software development.
3. Self-initiative, independent and a good team player
4. In addition to the above, candidate must have a minimum of 3 years of experience in the following

• Strong development experience using C++
• Developing desktop applications and reports using C#, Python, HTML, Java Script, XML, JSON technologies
• Developing Graphical User Interfaces (GUI) using WPF/XAML and MFC
• Developing multi-threaded applications
• Developing Real-Time solutions (applications that run within a fixed-time constraint)
• Developing software using SQL, MS Access DB and MongoDB
• Developing software via Agile software development methodology
• Debugging software applications at different stages of maturity, ranging from development-prototype through to commercial-production maturity levels
• Developing, debugging, and supporting software applications both locally and in remote locations
• Developing software that directly interfaces with electrical devices (sending/receiving data, controlling electrical devices via software)
• Experience working in cross-functional teams including mechanical and electrical engineers, acoustic and electromagnetic scientists (SME), and software architects
• Experience in Embedded Software development and Real-Time Operating System is added advantage

**Candidates having qualifications that exceed job requirements will receive consideration for higher-level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs.

Work Location: 315 Jalan Ahmad Ibrahim Singapore 639940 (company transport provided)

Work Schedule: 7:30 am to 4:30 pm

Young and research-intensive, Nanyang Technological University, Singapore (NTU Singapore) is ranked among the world’s top universities. NTU’s College of Computing and Data Science (CCDS) is a leading college that is known for its excellent curriculum, outstanding and impactful research, and world-renowned faculty. Today, we are ranked #2 for AI and Computer Science by US News Best Global Universities; and #8 for Data Science and AI by QS World University Ranking.

A hot bed of cutting-edge technology and groundbreaking research, the College aims to groom the next generation of leaders, thinkers, and innovators to thrive in the digital age. Located in the heart of Asia, NTU’s College of Computing and Data Science is an ‘exciting place to learn and grow'. We welcome you to join our community of faculty, students and alumni who are shaping the future of AI, Data Science and Computing.

The College of Computing & Data Science (CCDS) invites applications for the position of Research Fellow.

Key Responsibilities:

• Conduct programming and software development for big data management.
• Design and implement machine learning models for optimizing data management.
• Conduct experiments and evaluations of the designed algorithms and systems.
• Help with research presentation works such as high-quality paper writing.

Job Requirements:

• Preferably PhD in computer engineering, Computer Science, Electronics Engineering or equivalent.
• Be able to implement algorithms efficiently.
• Motivated in doing research in data management.
• Strong skills in C/C++ programming.
• Have experience in machine learning.
• Have experience in parallel processing.
• Have strong communication and collaboration skills to work within a team.
• Independent, highly analytical, proactive and a team player

We regret that only shortlisted candidates will be notified.