Total 1,778 electronic engineer job vacancies in Manufacturing / Production category in Singapore

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.

• Conduct daily pass-down meetings and escalate line issues if any

• Oversee manpower/overtime and consumables planning

• Ensure manufacturing and safety procedures are being followed

• Conduct training/coaching to leaders & operators to improve performance

• Implement ideas and improvement activities to prevent human errors

• Ensure good discipline and housekeeping in the line

• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

Requirements

• Diploma/Degree in Engineering/Science/Production/IT

• Preferably experienced in high-tech, high-vol manufacturing environment

• Good leadership and communication skills

• Willing to work 12-hour shifts (day or night)

• Perform ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design and create Final Test Loadboard and Wafersort Probecard
• Manage Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Responsible for test debugging, RMA analysis, and improving test solutions (HW and SW)

Requirements:

• Degree in Electrical/Electronic Engineering
• At least 3 years of ATE Test Program Development (C++/VB) experience with J750, UltraFlex, Advantest 93K, Advantest T2K test programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

JOB SUMMARY

Manufacturing Engineer will be responsible for planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site. The Manufacturing Engineer will adopt as its goals profitability, effectiveness, adaptability, responsiveness, quality, and the continuous improvement of products and services throughout their life cycles.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Able to perform Assembly process for High Level Assembly (HLA). Create procedures for processes and train staffs accordingly.

· Knowledge on assembly drawing, interpretation part drawing and specification is a must. Candidate with Medical product understanding will be added advantage,

· Report writing, perform DFM and able to communicate within internal and external stakeholders.

· Strong understanding on PFMEA, Process Flow, Control Plan and Process risk Assessments.

· Communicate frequently with operations, technical, and quality representatives within area of support through the tier process.

· Provide leadership and commitment in supporting continuous improvements in quality, productivity, and delivery performance through the deployment of continuous improvement framework.

· Reviews all input from Engineering Department, ECO’s, new product releases, configuration control policies, marking requirements, and participates in the DFM process.

· Solid understanding on BOM, ECN process, PCN and shop floor management will good plus.

· Monitor and continuously improve daily quality/efficiency performance for assigned areas. Exposure on Lean Tools example Cycle Time, TAKT Time, LBR is key, waste reduction etc would point to gauge.

· Involve on new product development by working with R&D, New Product Development and Quality to provide Design for Manufacturability guidance on hardware.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply with all procedures within the company security policy.

REQUIREMENTS:

Candidate must possess at least a Diploma, Degree, Engineering (Mechatronic/Mechanical) or equivalent. At least 5 year(s) of working experience in the related field is required for this position.

Employer’s Profile

Julian Grey’s client is an international semiconductor equipment provider, specialising in inspection solutions for consumer, industrial, technology, aerospace sectors and more. They take pride in providing excellent products, equipment installation and after-sales service to their customers. With sales and customer service offices in 8 countries across APAC, they are looking for enthusiastic and driven individuals to join their expanding team.

Work Location: Kallang, 9am - 6pm

Job Responsibilities

· To plan and organise machine making sure requirements are met before shipment

· Local or overseas off-site support will be occasionally required

Job Requirements

· Mechatronics certification in ITE or Diploma with 2 years’ experience will be advantageous

· Familiar with mechanical drawings and measurement tools, troubleshooting and Input / Output checks

· Technical knowledge in the fields of motor tuning and mechanical alignment will be recommended

· Requires the know how of machine automation with the use of sensor, electrical, pneumatic and servo systems

Follow us for more updates, interview tips!

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg


Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Production Planner | Mechanical Engineer | Jurong

• 5 Day | 8.00am - 5.30pm
• Jurong (Transport Provided at several west area mrt)
• $2,400 - $2,800

Requirements

• Candidate must possess at least Diploma in Engineering (Mechanical) or equivalent
• 2 years of working experiences in Manufacturing industry is preferable

Responsibilities

• Plan and forecast production schedule for manufactured product.
• Prepare schedule base on lead time of each project to meet shipping datesaccordingly customer orders.
• Create and prepare work orders for all in-house and farm out jobs
• Prepare status report for production progress and work in process
• Interface with production supervisor, customer service and purchasingdepartment on material status and production planning issues.
• Submit weekly reports to customer service department to reflect currentproject status and any potential delay.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

• Carry out product engineering duties for integrated circuit (IC) products throughout all stages of product development and manufacturing.
• Collaborate with production test engineers and/or relevant stakeholders to maintain and enhance the program and hardware of existing products.

Requirements:

• Degree in Electronics Engineering or equivalent.
• At least 5 years of experience in Product Engineering.
• Proficient in Tape-out procedure, CMOS device, and IC process.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Position Summary:

Responsible for supporting product transfer, instrument manufacturing, troubleshooting, failure analysis, quality improvement, process enhancement, cost reduction, engineering evaluation and system improvement.

Position Responsibilities:

• Support and drive activities to ensure successful product transfer into manufacturing.
• Drive troubleshooting, failure analysis, root cause analysis, issues closure and corrective action processes as required.
• Perform instrument setup, calibration and final system integration test.
• Establish and maintain databases of instrument failures and defects.
• Perform data trending analysis, construct and execute design of experiments to address yield and quality issues.
• Drive and implement process improvements and product sustaining activities to meet the production goals.
• Drive maintenance and improvement activities on test fixtures and equipment.
• Drive and implement cost reduction activities by perform engineering evaluation to qualify new or improved materials, processes and products.
• Apply various analysis techniques, such as FMEA and statistical analysis to optimize product quality and minimize cost, providing all calculations, performance data, and drawings required on new and existing products.
• Manage and coordinate Engineering Change Order implementation activities including scrap analysis, material disposition, update work instructions and test requirement changes.
• Documentation responsibilities include, but not limited to, generating detailed engineering drawings, Bill of Materials, test reports, assembly procedures and design validation plans.
• Work closely with contract manufacturing partners and key suppliers to ensure smooth transition of quality products from development into manufacturing.
• Provide guidance and supervision to junior staff.

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements:

• Bachelor’s degree or Master in Mechanical or Electro-mechanical Engineering.
• Able to differentiate and identify components (using visual) of different colours.

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Preferred Experience/Education/Skills:

• Typically requires a minimum of 5 years of related experience with a Bachelor’s degree; or 3 years and a Master’s degree; or a PhD without experience; or equivalent work experience.
• 5+ years of engineering experience in mechanical or electro-mechanical based products for commercial and industrial markets.
• Good working knowledge and experience in mechanism design and electro-mechanical systems.
• Strong organizational skills, attention to detail and accuracy, and the ability to work independently in a team environment are essential.
• Solid knowledge of GD&T, plastic & sheet metal tooling, casting, mechanism, stress analysis, mechanics, machining and standard manufacturing processes.
• Candidate must be able to effectively lead teams, interface well with the manufacturing and service organization, and has a proven track record of transferring products to manufacturing.
• Must possess good analytical and troubleshooting skills.
• Proficient in engineering tools such as, statistical analysis, design of experiments, product and process capability analysis.
• Proficient in Solidworks or 3D CAD tools.
• Good working knowledge of BOM (Bill-Of-Material) structuring fundamentals and have the ability to create ECOs (Engineering Change Order) and Deviations.
• Demonstrated use and understanding of MRP systems, Product Data Management systems and Change Control processes. SAP & PLM experience will be added advantage.
• Experience with FDA regulated medical device product development preferred.
• Product development experience in the life sciences, biotech, biomedical, nanotechnology or semiconductor industries preferred.

• You are responsible to drive and manage the silicon Bump & package assembly suppliers, backend processes and solutions to achieve the aggressive TQRDCEB goals.
• You will work closely with package design & technology, test & product engg, production planning, quality engg & NPI teams, assembly/substrate suppliers to support new product & technology introduction activities by defining processes, monitoring systems, manage process improvements and changes.
• Provide day-to-day support to bump and assembly suppliers & internal planning, product and test engineering teams.
• Plan, drive & implement improvement activities for continual improvement, 2nd sourcing, cost reduction & customer satisfaction.

•Qualifications:

• PhD / Master / Degree in Mechanical / Electrical / Electronics Engineering with 7~12 years of relevant experience of managing advanced node silicon bumping, large body single & multi-chip (2.1/2.5/3D) package assembly, substrate & back-end suppliers and processes.
• Hands on experience in Product Life-Cycle Management - creating & maintaining Bill of Material structure, Process Documentation, Process Change Notification etc.
• Good team player, result oriented individual, experienced in project management, failure analysis tools, techniques and TQM. Good analytical, problem-solving skills. Flexible and agile.
• Sound knowledge of applicable industry standards, quality systems, regulations, knowledge of prevailing and emerging silicon package & substrate technologies, bumping and assembly processes, materials and equipment.
• Able to communicate with internal team members & external partners in various geographic locations and may required to travel from time to time at short notice.
• Experienced AutoCAD user. Knowledge of silicon & PCB fabrication, board assembly processes, are an added advantage

Full time / Locally based

• Reporting to the Management team which is head-quartered in Singapore, the successful candidate will manage all aspects of selling and promoting a range of Scientific Instruments into a wide and diverse customer base, ie. R&D institutes, universities and industry.
• Proactively engaging in new business development & achieving set target
• Provide technical consultation to clients to help solve application issues
• Overseas & on the job training will be provided.

Requirements

• Nitec/Diploma in Chemistry/Chemical/Engineering with 1 to 2 years working experience.
• Candidates with background in sales or laboratory experience is preferred
• Able to take initiative, open to changes, decisive and driven for results and quality
• Highly motivated and driven
• Ability to work independently with good team spirit
• Strong in Project and Time Management
• Applicable to Singaporean only

about the company

My client is a leading semiconductor equipment manufacturer with an outstanding international reputation in its field and a great emphasis on training & development. With more than 20 years history, this is a great brand to join at an exicting time in their development.

about the job

• Performs the set-up, calibration, testing and troubleshooting of equipment
• Responsible for Calibration and Repair of electronic boxes
• Setting up of tape & reel cum inspection machines.
• Prepare, setup and qualify machines
• Machine assembly
• Prepares technical reports summarizing findings and recommending solutions to technical problem
• Machine alignment, teaching and test run

skills & experience required

• Diploma / Higher NITEC in Mechatronics / Electromechanical / Mechanical / Manufacturing / Electrical Engineering
• Relevant internship / working experience in cleanroom / front end equipment manufacturing / semiconductor environment will be a plus
• Able to read basic engineering drawings
• Comfortable to be hands on and also with daily documentation & administrative
• Understand machinery automation with electrical, servo, sensor, pneumatic system
• Able to read mechanical drawings and measurement tools, perform I/O check and trouble shooting
• Training given to candidate with no experience
• Willing to work around Ang Mo Kio / Kallang / Lavender area

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Basic: Up to $4200
• 5 Working Day: Mon- Fri
• Office Hour: 8am - 5.30pm
• Location: Ang Mo Kio (Transport Allowance $70)
• AWS + VB + MNC Medical Industry

Responsibilities:

• Plan, lead, coordinate and execute product development activities in blood management products, such blood bag products.
• Pursue set & defined goals & targets.
• Identify scope, application, projected market potential and price target.
• Define project approach & strategy.
• Identify critical success factors as benchmarks & constrains to overcome.
• Project budgeting & control.
• Manage and co-ordinate design projects with various departments, customers and supplier.
• Managing project schedule & timeline.
• Perform biological assessment to support material changes.
• Provide regular update to management on progress of projects.
• Preparation of Biological Evaluation Plan (BEP) and Biological Evaluation Report (BER).
• Design, review and implement biocompatibility evaluations including biological testing, chemical characterization and Biological Risk Assessments (BRA) to comply ISO 10993.
• Biocompatibility sections in regulatory submission (Technical files, Design dossier, Clinical Evaluation Report (CERs).
• Maintaining up-to-date product standards compliance, technical file & design history file.
• Establish and carry out design verification test (Type Testing, Biocompatibility, etc).
• Perform designated equipment calibration and maintenance.
• Establish new SOP for test methodology.
• Ad-hoc duties as assigned by Section Head.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated Resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)

About us

Being a pivotal role in the concept to production of a Dyson Designed Cell puts the Development team at the heart of this exciting journey. The Team will translate early concept directions into fully developed, optimised & validated solutions to make at high volume for the next generation of Dyson products.

About the role

Development of novel Cell technology comes with new and highly challenging manufacturing processes. This role encompasses processes required to progress technology established in research through to scaled manufacture. Being the junction point for the cell technology and the manufacturing requirements to deliver a solution to meet aspirations of both.

A successful candidate will deliver solutions to difficult object problems where design and development of novel cell manufacturing processes are required; along with proven track records working with cross functional teams from proof of concept to high volume manufacturing.

Reporting to the Senior Engineering Manager, the role will encompass Innovative Cell manufacturing process design, Inter-team co-ordination, Project management and Technical communications. You will be part of a multi-disciplinary team and have the opportunity to develop capabilities across a range of materials processing, cell assembly

• Be the driver of novel process design ensuring the technical requirements are met for Form, Fit & Function from a process perspective – construct design requirements and develop to resolution to ensure a smooth transition to equipment & production teams
• Contribute to the development and optimisation of innovative new technologies that can be incorporated into clear manufacturing process and equipment needs to give a performance, cost, productivity or environmental advantage
• You will be the application subject matter expert and primary point of contact for the responsible processes, working alongside research and manufacturing teams. This will be enhanced through frequent and effective engagement & communication with the energy storage cross functional teams
• Conduct proof of concept evaluation and design of experiments during development, establish baseline process and metrics
• Characterise new and existing processes, establish process margins and controls for critical parameters to improve process robustness
• Play an active role in supporting the understanding of future Dyson cell requirements, working with the research teams to drive new specifications and further enhance the next generation of Dyson’s battery technology
• Support the design and operational management to identify balanced solutions and opportunities to meet overall project objectives
• Build relationships with internal departments, external regulators, industry bodies within Energy Storage
• Exhibit clear presentation of technical information and supporting documentation to ensure accurate hand over to cross functional teams
• Be vocal a participant, influencer and presence for Cell Process Development
• Challenge and develop Dyson engineering practices to continuously improve efficiency
• Excellent relationship building skills with the ability to build a network of connections both upstream and downstream within Dyson
• Ability to work sensitively, discretely, and effectively across Dyson.

About you

• 3 - 5+ years’ experience of leading technical matters within process development of new and novel technologies
• Relevant hands-on experience and background within process design and development of novel technologies in battery, electronics industries
• Good knowledge in one or more of the following technologies used in slitting, lamination including heat sealing, adhesive sealing etc., roll-to-roll processes, and continuous motion automation
• Ability to apply engineering fundamentals and towards manufacturing process development – demonstrated understanding of how hardware and process interact with each other
• Ability to work with external suppliers, partners to identify, design and develop feasible manufacturing solutions from pilot run to mass production
• A broad understanding of material properties and manufacturing processes related to Cell engineering materials
• Excellent knowledge and practical experience in pFMEA, root cause analysis, design of experiments (DoE), statistical data analysis and interpretation of experimental data, including software used for analysis (JMP, Minitab etc.)
• Persistent approach to problem solving and an inquisitive nature – demonstrated experience of data driven root cause analysis
• Strong organisational skills with a methodical and detailed approach
• A good team player, highly motivated with can-do attitude
• Must demonstrate a passion for working for Dyson

Desirable:

• Appreciation of relevant Battery technology or battery products across the industry
• Broad experience in other processes such as mixing, extrusion, calendaring, formation etc. will be advantageous
• Good knowledge and experience with laser cutting
• Good knowledge and experience with vision systems for inspection and defect detection
• Experience in process development and process transfer from lab scale to pilot scale, and to high volume production
• Ability to communicate at all levels of the organisation
• When required, travel to other Dyson facilities in Asia/UK for project engineering build support

Qualifications / Professional Memberships:

• Educated to Degree/Master’s level (scientific/engineering based)

Benefits

Dyson Singapore monitors the market to ensure competitive salaries and bonuses. Beyond that, you’ll enjoy a transport allowance and comprehensive medical care and insurance. But financial benefits are just the start of a Dyson career. Professional growth, leadership development and new opportunities abound, driven by regular reviews and dynamic workshops. And with a vibrant culture, the latest devices and a relaxed dress code reflecting our engineering spirit, it’s an exciting team environment geared to fuelling and realising ambition.

You are responsible for completing end-to-end planning and coordinating all the manufacturing processes for a specific project. Work closely with internal stakeholders regarding manufacturing capabilities, production schedules, and other considerations to ensure that manufacturing can meet cost, quality, and delivery requirements.

Develops, evaluates, and improves manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling, and production equipment capabilities, assembly methods, and quality control standards. Analyzes and plans workforce utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency.

Analyze gaps between actual production time and standard time and discuss with Process Engineering for a resolution. Assures product and process quality by designing testing methods; testing finished- product and process capabilities; establishing standards; confirming manufacturing processes and developing cleanroom control and contamination control protocol and ensuring compliance.

Requirements

• Diploma/ Degree in Engineering or Engineering Technology; Industrial or Mechanical preferred

• Minimum of 3 years of experience in the manufacturing engineering field, preferably in a manufacturing assembly environment

• Strong leadership and entrepreneurial abilities

• Good communication and organizational skills

Responsibilities

• Participate in new product development project from concept to launch
• Support and improve existing product lines
• Support activities to reduce production cost, lead-time and improve product reliability and quality
• Collaborate with external partners in joint product development projects
• Manage project scope, timelines, budgets, product specifications, production schedules, and any other deliverables
• Establish engineering specifications and production processes to meet technical, functional and quality requirements
• Coordinate and support manufacturing of prototypes and products to ensure reliability and quality of product
• Develop and perform assembly and test procedures for product according to specifications
• Identify and resolve all issues effectively to achieve all objectives
• Ensure proper documentation (including manuals) of all required information for product/projects
• Support product installations and any necessary diagnoses, troubleshooting, service, and repair
• Provide product training and support internally and distributors

Requirements

• Bachelor’s degree in Electronics, Electrical or System related Engineering
• 3-5 years relevant experience in product development
• A good team player with strong interpersonal communication skill
• Self-motivated and able to take ownership of appointed task to follow through to completion with little supervision
• Familiar with programming languages C and C++
• Knowledge on Windows OS
• Basic understanding on schematic and Gerber
• Working location is in Jurong East
• Singaporeans Only

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Our client is from Manufacturing industry. They are looking for a Engineer, Product Costing to assist their team for the next phase of their business. They are located in North.

Duties:

• Lead cost-saving initiatives through Value Analysis Value Engineering (VAVE) or Design to Cost (DTC).
• Ensure timely and well-tracked cost reductions.
• Oversee the product lifecycle from entry to end-of-life.
• Represent the organization in cost-related initiatives.
• Compile and provide necessary reporting.

Requirements:

• Minimum Bachelors Diploma/ Degree in Mechanical or Electrical Engineering
• Minimum 3 years of experience in commodity / project management with supply chain and engineering
• Experience in VAVE is required.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

• Handle a team of line leaders and operators to meet daily production output, quality, productivity, and yield.
• Responsible for manpower, overtime and consumables planning and perform daily pass-down meetings and escalate line issues.
• Ensure manufacturing and safety procedures are observe at all times.

Requirements:

• Diploma in Engineering or equivalent
• At least 2 years of experience in High-Tech, High-Vol Manufacturing industry.
• Able to work 12-hour shifts (day or night)

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Job Description

• Industry/ Organization Type: Manufacturing/Aerospace Engineering
• Position Title: Manufacturing Engineer
• Working Location: Seletar Aerospace Park
• Working Hours: Monday – Friday, 8 am – 5.30 pm
• Salary Package: Up to $4000 + AWS + VB
• Duration: Permanent

Key Responsibilities

• Prepare production drawings by 2D drafting or 3D modelling using CAD software for design and build-to-print jobs.
• Carry out manufacturing process planning using ERP.
• Prepare Bills of Material from customer drawings or in-house designs.
• Provide technical support during fabrication phase in areas of machining, welding, and assembly.
• Provide technical support for outsourced parts fabrication.
• Collaborate with cross functions to ensure on-time delivery, quality and cost goals are met.
• Participate in continuous improvement projects as part of the lean manufacturing transformation.
• To use engineering tools to test and implement efficiencies in quality, manufacturing, assembly, and testing.
• To provide customer support/liaise/coordinate/follow-up with external customers on assigned projects.
• To monitor project deliverables.
• To facilitate collection of customer requirements during RFQ stage for design projects.
• Any other duties as and when assigned by the Management.

APPLY NOW!!!

• Minimum Diploma in Mechanical Engineering or other related discipline with at least 3 years of relevant experience.
• Ability to interpret engineering drawings and carry out drafting or 3D modelling work.
• Possesses good knowledge of machining processes and technologies.
• Possesses good project management and coordination skills.
• Proficient in MS Office applications, Adobe Acrobat, AutoCAD, NX and GD&T.
• Experience with CNC machining and machine measurement will be advantageous.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65848 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Well Established Company
• Basic $3500 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Serangoon
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Perform production support for new tooling and trials
• Diagnose problems in the production line and provide recommendations and training
• Supervise, perform and ensure production processes are executed with utmost efficiency and quality according to work instructions
• Work closely with team on new tool developments
• Maintain production machine and equipment maintenance procedures
• Perform tasks as assigned by Production manager

Job Requirements:

• Possess minimum Diploma / Degree in Engineering or relevant qualification
• Possess minimum 2 years working experience in injection moulding industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Summary:
The Production Lead Engineer will be responsible for overseeing and managing the production process of chemical products within the organization. This role requires a strong background in chemical engineering, production management, and quality control, as well as the ability to lead and mentor a team. The incumbent will play a key role in ensuring the efficient and safe production of chemical products while adhering to industry standards and regulatory requirements.

Responsibilities:

• Oversee and manage the overall production process, including planning, scheduling, and coordination of resources to ensure timely and efficient production of chemical products.
• Implement and maintain quality control measures to ensure that all produced chemical products meet the required quality standards and specifications.
• Identify opportunities for process optimization and efficiency enhancement and lead the implementation of improvement initiatives to maximize production output and minimize waste.
• Provide leadership and guidance to the production team, including training, mentoring, and performance management, to ensure a skilled and motivated workforce.
• Ensure compliance with safety protocols and regulations to maintain a safe working environment for all production personnel and to prevent accidents or incidents.
• Oversee inventory levels and ensure that raw materials and finished products are efficiently managed to meet production demands and minimize excess inventory.
• Analyse and resolve any production-related issues or challenges, working collaboratively with cross-functional teams to implement effective solutions in a timely manner.
• Maintain accurate documentation of production processes, including standard operating procedures, production reports, and quality control records, to ensure compliance with regulatory standards and facilitate knowledge sharing.
• Monitor production costs and implement strategies to optimize production expenses while maintaining product quality and meeting production targets.
• Stay updated on industry trends, technological advancements, and best practices in production engineering, and integrate relevant knowledge to enhance production processes and overall efficiency.
• Develop detailed project plans for the implementation of cultural change initiatives, ensuring alignment with data-driven insights.
• Foster a culture of continuous improvement by collecting feedback, iterating on strategies, and adapting cultural change initiatives based on ongoing data analysis.

Requirement:

• Bachelor's or Master's Degree in Chemical Engineering or a related field.
• Minimum of 7 years of experience in production management within the chemical industry, with a strong understanding of production processes and quality control systems.
• Proven leadership experience, with excellent interpersonal and communication skills.
• Proficiency in production management software and tools.
• Thorough knowledge of safety and regulatory standards related to chemical production processes.
• Strong analytical and problem-solving skills, with a focus on process optimization and continuous improvement.
• Ability to work effectively in a fast-paced and dynamic production environment

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1549345

Triton AI Pte Ltd

License no. 21C0661

Dear All

Our client from Oil and Gas Industry job production center is looking for a Production Engineer for their projects. Mechanical Engineering education with oil and gas job production working experience is required for this job.

Person should analyze manufacturing processes and workflows to identify areas for improvement and implement measures to increase efficiency, reduce waste, and enhance productivity. This includes evaluating equipment, tools, and production methods to streamline operations and improve overall output.

Need to work long hours, and responsible for managing resources, such as manpower, materials, and equipment, to ensure smooth production operations. This involves planning and scheduling work orders, allocating resources effectively, and optimizing resource utilization to meet production targets.

RESPONSIBILITIES

Manufacturing/ Production Line setup, pre-qualification and maintenance.
Provide technical support to customer related to assembly/ manufacturing.
Develop process and generate work instruction.
Review drawing, customer specifications and Bill of Materials cleanup.
Assembly, test, and commissioning of highly automated industrial equipments.
Train, certify and monitor assembly technicians.
Develop necessary technical competencies and equipment capabilities to meet operational performance targets
Work and collaborate with Production to achieve the desired quality and output
Conduct MRB to review non-conformance parts disposition.
Design/Fabricate tools, jigs and fixtures.
In-process yield/reject/scrap rate monitoring.
Lead and drive the team to participate in all continuous improvement projects related to cost, quality, utilisation & productivity using Six-sigma or similar applicable technology such as Cpk, FMEA, Lean etc
Any other duties assigned by his/her superior / Manager.

REQUIREMENTS

Minimum three years of relevant experience in Equipment Manufacturing Industry preferably wire bonding Equipment (Ball Bonding/Wedge Bonding/Die Bonding)
Diploma in Mechanical/Mechatronics/Electrical Engineering or equivalent
Proficiency in equipment troubleshooting techniques
Strong problem solving and analytical skills with good knowledge of SPC
Good leadership / presentation / communication / team building skills
Ability to work proactively and to identify issues and propose solutions
Able to design and implement effective systems, processes and informatio/ reporting mechanisms
Experience in Lean Manufacturing and ISO system

Please indicate your current and expected remuneration.

Job Description:

• Ensure new products conform to all regulatory and product safety requirements
• Work with R&D in determine test plans for new products
• Work with 3rd party test house on the conduct of product conformance tests - Product Safety, EMC, Mechanical, Vibration, Climatic tests, etc
• Review and validate test reports from internal and external tests conducted
• Coordinate for Product Safety Factory Audit by external party
• Update and maintain of Product Safety Procedure
• Coordinate with Product Safety Body on any update for new/alternate source component listed in safety procedures
• Update and sharing of Safety regulation and information and Safety Application cost
• Sharing of Safety critical components list , labels and others as deems important
• Sharing of finding from routine Product Safety audit and follow-up
• Conduct product safety training for related staff and support respective sections on product safety information

Job Requirements:

• Candidate must possess at least Bachelor’s Degree in Electrical or Electronics Engineering with at least a 2 years of working experience in Manufacturing industry
• Knowledgeable and experienced in using typical measuring tools and equipment will be an advantage
• Knowledgeable EMC, ESD, RoHS and Product Safety Tests Theory and Regulatory Compliance Standard will be an advantage
• Self-motivated, dedicated team player and able to meet deadlines
• Willing to perform Overtime
• Candidate with no working experience is also welcome to apply

Interested applicants, please send in your resume stating your date of availability, current and expected salary.

Job Descriptions:

• Design, build, install and maintain electrical systems that power production lines and facilities.
• Provide engineering support in machine electrical wiring work.
• Carry out inspection check on machine power before and after production.
• Troubleshoot and resolve machine electrical non-conformance.
• Work with other departments in scheduling maintenance or repairing work to improve assembly process.
• Plan and propose of automation solution for productivity improvement.

Job Requirement:

• Good communication and interpersonal skill
• Require working in machine assembly environment
• Hands on experience and knowledge in electrical work
• Knowledge of drawing software (Solidworks, Unigraphic, etc) is added advantage
• Strong problem solving skills

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629