Total 1,722 infrastructure engineer job vacancies in Manufacturing / Production category in Singapore

about the company

My client is a leading semiconductor equipment manufacturer with an outstanding international reputation in its field and a great emphasis on training & development. With more than 20 years history, this is a great brand to join at an exicting time in their development.

about the job

• Performs the set-up, calibration, testing and troubleshooting of equipment
• Responsible for Calibration and Repair of electronic boxes
• Setting up of tape & reel cum inspection machines.
• Prepare, setup and qualify machines
• Machine assembly
• Prepares technical reports summarizing findings and recommending solutions to technical problem
• Machine alignment, teaching and test run

skills & experience required

• Diploma / Higher NITEC in Mechatronics / Electromechanical / Mechanical / Manufacturing / Electrical Engineering
• Relevant internship / working experience in cleanroom / front end equipment manufacturing / semiconductor environment will be a plus
• Able to read basic engineering drawings
• Comfortable to be hands on and also with daily documentation & administrative
• Understand machinery automation with electrical, servo, sensor, pneumatic system
• Able to read mechanical drawings and measurement tools, perform I/O check and trouble shooting
• Training given to candidate with no experience
• Willing to work around Ang Mo Kio / Kallang / Lavender area

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

• Handle a team of line leaders and operators to meet daily production output, quality, productivity, and yield.
• Responsible for manpower, overtime and consumables planning and perform daily pass-down meetings and escalate line issues.
• Ensure manufacturing and safety procedures are observe at all times.

Requirements:

• Diploma in Engineering or equivalent
• At least 2 years of experience in High-Tech, High-Vol Manufacturing industry.
• Able to work 12-hour shifts (day or night)

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Join us and be a part of the team working on developing haptics for immersive reality!

Microtube Technologies is looking for a Product Engineer to develop haptics for our bespoke gloves for a wide range of application in healthcare training and industrial simulation.

Product Engineer

As a Product Engineer in Microtube Technologies, you will be primarily responsible for development, testing, fabrication and assembly of glove and development kits. This candidate will work with the engineers in development and improvement of sensor and haptics solutions. This position reports to the Principal Designer and interfaces with the Technical team.

Duties and responsibilities

· Perform fabrication, testing and assembly of in-house products

· Assists in the product design and development of wearables involving sensors and haptics

· Operate test equipment and conduct root cause failure analysis

· Design, fabricate, and evaluate components for use in wearables

· Produce design documentation and execute test procedures

· Develop and execute verification/validation testing strategy

· Recommend risk mitigation actions and maintain risk management file

· Participate in quality improvement process

· Works independently and as part of a team with work checked on a regular basis

· Demonstrate technical competency and independent solution thinking

Qualifications and desired skills

· Bachelor’s Degree in Electrical Engineering, Mechanical Engineering, Mechatronics or closely related field

· Relevant experience in textile engineering will be advantageous

· Experienced in the use of general engineering lab equipment.

· Fine hand skills for soldering and other similar benchtop assembly processes

· Demonstrate exceptional communication and interpersonal skills

Singaporeans and permanent residents are welcome to apply. The appointment would start as soon as possible.

Please attach your resume with the following information:

Reason for leaving last employment

Last drawn salary

Expected salary

Notice period

(We regret that only shortlisted candidates will be notified)

Responsibilities:

• Report and compilation of daily maintenance and other activities of assigned station, as well as write troubleshooting reporting pertaining to a machine down time.
• Provide improvements ideas and work within the group to further improve the equipment performance.
• Report and compilation of daily maintenance and other activities of assigned station, as well as write troubleshooting reporting pertaining to a machine down time.
• Ensure minimum downtime, quick response to trouble -shoot, rectify return to production.

Requirements:

• Min Diploma in any Engineering field
• Relevant working experiences in wafer fab / semiconductor industry
• Good technical skills including problem-solving, statistical data analysis
• Able to work in a team.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Description:

• Responsible for supporting yield improvement, driving, and managing the continuous yield and quality improvement for various devices.
• Responsible for having close interaction with Product Test Engineering team and communicate technical product status to management.
• Responsible for following up with Foundries and test subcontractors to resolve low yield/reliability issues.
• Responsible for monitoring of parameter test and wafer sorting yield with in-depth analysis using various statistical data analysis tools and understand on semiconductor process knowledge, e.g., inline d0, ET, CPK etc.
• Develops failure analysis methodologies as required for assigned projects to enable rapid problem solving with support of internal and external parties.

Requirements:

• Degree/Master’s in Electrical Engineering, Microelectronics or related discipline.
• Strong analytical problem-solving skills.
• Capability of mass data analysis.
• Min 2 years of experience in Product Engineering.
• Salary package will be offered based on working experience.

Job Description

• Industry/ Organization Type: Manufacturing/Aerospace Engineering
• Position Title: Manufacturing Engineer
• Working Location: Seletar Aerospace Park
• Working Hours: Monday – Friday, 8 am – 5.30 pm
• Salary Package: Up to $4000 + AWS + VB
• Duration: Permanent

Key Responsibilities

• Prepare production drawings by 2D drafting or 3D modelling using CAD software for design and build-to-print jobs.
• Carry out manufacturing process planning using ERP.
• Prepare Bills of Material from customer drawings or in-house designs.
• Provide technical support during fabrication phase in areas of machining, welding, and assembly.
• Provide technical support for outsourced parts fabrication.
• Collaborate with cross functions to ensure on-time delivery, quality and cost goals are met.
• Participate in continuous improvement projects as part of the lean manufacturing transformation.
• To use engineering tools to test and implement efficiencies in quality, manufacturing, assembly, and testing.
• To provide customer support/liaise/coordinate/follow-up with external customers on assigned projects.
• To monitor project deliverables.
• To facilitate collection of customer requirements during RFQ stage for design projects.
• Any other duties as and when assigned by the Management.

APPLY NOW!!!

• Minimum Diploma in Mechanical Engineering or other related discipline with at least 3 years of relevant experience.
• Ability to interpret engineering drawings and carry out drafting or 3D modelling work.
• Possesses good knowledge of machining processes and technologies.
• Possesses good project management and coordination skills.
• Proficient in MS Office applications, Adobe Acrobat, AutoCAD, NX and GD&T.
• Experience with CNC machining and machine measurement will be advantageous.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65848 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Spectainer is looking for a new product engineer to join our talented and dynamic team! The ideal candidate is a creative, driven and productive individual who has a background in Mechanical Design and is trained in Creo Parametric and technical documentation. This role will be a key member of our Product Development Team, working under the guidance of our CEO and Product Leads. The individual filling in this role will get a chance to join the team behind COLLAPSECON and COS, our flagship product and the first ever fully-automated collapsible container solution.

The product engineer must be rigorous, detail-oriented and has a strong ability to take initiative and be proactive.

The successful product engineer will be trained and developed for a more senior role in the Product Development or Technical Team.

Role Purpose

The Product Engineer is responsible for assisting the Product Lead(s) in design, modification and documentation of Spectainer products.

Reporting to: Product Lead

Location: Singapore

Role Accountabilities

• Support the final stages of Spectainer’s COLLAPSECON & COS design, prepare technical drawings, specification, BOM, prepared parts list, production drawings, patent drawings, and other technical documentation.
• Assist in developing new design concepts.
• Assist in the durability assessments of all OEM parts and components to ensure the components/parts are able to meet the company’s target useful lifecycle
• Assist in preparing test schedules to ensure products operational efficiency.
• Collaborate with service team to write the maintenance manuals and repair tariff, and testing requirements to ensure the COLLAPSECON meets the durability and operating standard, and conform with the onsite safety standard under guidance of the Product Lead.
• Ensure that all technical documentation is up-to-date.
• Assist in the provision of cross-functional support to ensure COLLAPSECON & COS are successfully implemented.
• Assist in the provision of onsite training to operators and supervise the entire set-up process to ensure the COLLAPSECON is fully operable and commissioned.

Your day-to-day duties will typically consist of:

• Using computer aided engineering and design software and equipment to perform drafting and design.
• Liaising with the whole Product Team as well as outside stakeholders in monitoring the day-to-day production.
• Liaising with suppliers for design and construction information and documentation.
• Developing design for new product concepts.
• Partaking in the analysis of research data and proposed product specifications to determine feasibility of designs.
• Drafting technical documentation including manufacturing and quality assurance drawings assemblies and components in addition to other clerical and document control activities.
• Assisting in the experimental test programs to ensure designs meet final product specifications.
• Analysing test data and technical reports to determine if current and/or new designs and products meet functional and performance specifications.

Key Qualifications & Skills:

• Bachelor’s Degree in engineering. With a specialisation in Mechanical Engineering or a similar field.
• Experience with Creo Parametric, Creo Simulate for 3D CAD and FEM analysis packages.
• Highly collaborative and team-oriented, with comfort in ambiguity and rapid change.
• Commitment to adhere to project timeline.
• Dedicated to take part to drive the team’s success.
• Strong conceptual and analytical skills.
• Fluency in Mandarin and English.

This role is only open to Singaporeans and PR. Fresh graduates are welcome.

Compensation and benefits:

• Fixed Annual Salary: $40,000 – $60,000
• Overtime Grab food & ride allocation
• Generous 20 days annual leave allocation
• Staff pantry stocked with snacks and beverage
• In-house coffee from Homeground Coffee
• Close to public transport and multiple car park options available
• Ergonomic workstations for each team member
• Collaborative office layout
• Shower facilities

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Clash checking in AVEVA
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Clash checking in AVEVA
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting,plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement form AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layoutand Piping General Arrangement from AVEVA
• Etraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and oyther discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Summary

Develops and implements production/processing methods and controls to meet quality standards, production output in the most cost effective mean. Identify, investigates, troubleshoot and resolves production deficiencies. Recommends and implements improvement or modifications in sequence of operations, equipment utilization and related matters.

Job responsibilities

• Ensure the scrap, production yield and cycle time reduction targets are metL
• Lead process related issues by pro-actively working with Quality, Production and Equipment team
• Review and Implement new router released from Engineering Dept.
• Leads projects for process and cycle time improvement.
• Update Production Router as per improvement.
• Identify, investigate, troubleshoot and resolve shortcoming in processes.
• Update the relevant Work Instructions and Operating procedures for process improvements.
• Participate as a team player in maintaining a conducive, healthy & safe work environment.
• Review areas for skills improvement of the technicians with the manufacturing specialist.
• Maintain 5S in the workplace
• Review the following reports and identify the shortcomings in process:
• Labour efficiency of individual worker
• Machine efficiency & utilization report
• Manufacturing Variance reports
• Support QA for failure analysis and identification of corrective action for customer returns and internal CAR’s
• Support QA team during customer audits
• Perform other duties as requested by management

Job Requirements

• Bachelor’s degree in manufacturing or industrial engineering or related technical discipline required.
• Minimum of 5 years work experience in manufacturing environment required preferably in metal components/assemblies; machining, stamping, sheet metal fabrication.
• Preferably minimum 3 years work experience in welding of thin materials utilizing GTAW and PAW Processes.

Interested candidates, please click on “Apply Now”. Alternatively, you may email us detailed resume to [email protected].

Tempserv Pte Ltd

License No : 06C3745

Consultant In-Charge: Daniel Lee / EA Personnel No: R1989151

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• Handle assigned Product from design to end of life and prepare the NPI schedules and ensure to meet the timeline.
• Monitor the progress of the product start from design to New Product Introduction (NPI) and site transfer until production ramp up.
• Liaise with respective functional department and teams to clear the roadblocks of any issue related to assign products.
• Develop continuous product improvement costing, process etc.

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent
• At least 3 years of product transfer experience in Electronics industry.
• Able to multitask and good computer knowledge.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Industry: Aerospace
Location: Loyang
Working Hours: Mon- Thurs 740am – 0535pm, Fri 740am- 255pm
Basic Up to $5500 + AWS + Bonuses

Job Responsibilities

• Create and maintain necessary shop documentation to ensure compliance with CMM & other specification revision:

1. Overhaul Routers
2. Lot Sheets
3. ICR
4. Bushing Installation Sheets
5. OHRW Assembly/ Dis Assembly Worksheets
6. OHRW Process Sheets
7. Plating Data Sheets
8. Plating Masking Data Sheets
9. NDT technique sheets
10. Procedures
11. Forms

• Prepare and submit concessions to OEMs for out-of-scope repairs.
• Liaise with OEMs on technical queries or any other matters as required.
• Provide technical support and leadership to the shop floor, as well as to various sections requiring engineering inputs.
• Support shop floor on modification of existing fixtures and designing of new ones.
• Ensure that all matters pertaining to product or process are managed efficiently.
• Ensure that all the technical problems are resolved in a timely manner, hence enabling smooth operation and production.
• Liaise with Marketing & Customer Service Department to ensure that all technical requirements set out by the customers are met.
• Carry out feasibility studies for new capability setup as well as initiate and carry out the set up.
• Set up new specification capability on existing special processes.
• Review special processes requirement for new product part number / CMM.
• Set up new Equipment / Machine or modify existing set up for increase in capacity.
• Conduct 8D, SCAR and INC Investigation and issue warranty reports for defective components. Perform process non-conformance gap analysis and establish corrective & preventive actions.
• Active participation of Lean-Sigma projects and to attain at least a Lean Sigma Green Belt. Carry out continuous improvements and enhance systems and processes more efficient and robust.
• Participate actively in contribution to HSE development and improvement. Support in HS&E risk assessment for current and new equipment/process.

1. Chemical risk
2. General risk
3. Ergonomic risk
4. Environmental risk

• Establish Process/Equipment Autonomous Maintenance Schedule/Plan in consultation with the support of Process Manager/Maintenance team.

Job Requirement

• Degree in Engineering or any other related disciplines.
• Minimum of 3-5 years related experience.
• Knowledge of MS Words, Excel & PowerPoint.

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

We regret that only shortlisted candidates will be notified. Please send your updated CV to [email protected]

EA Personnel: Wong Kaili (Kylie)

EA Registration No.: R21100484

People Profilers Pte Ltd
20 Cecil St, #08-09, PLUS Building, Singapore 049705
EA Licence Number: 02C4944
Tel: 6950 9749

Authorities and Responsibilities

1. Responsible to Provide primarily execute & support directives set forth at production department.
2. Fully responsible for First Article Run till Approval, and take charge of preliminary production run lots. This includes plan, monitor and control projects from the receipt of orders through completion and getting project acceptance by customers.
3. Review / prepare, administer and implement Process Routes, Inspection Plans and other operational procedures in accordance to the project specifications, client's surveillance requirements, and enforce the same on Operations in their project execution. This includes designing of Jig and Fixtures which is required for the machining process, as well as development of CNC Program for executing the machining run of the products.
4. Communicate and co-ordinate with inter-departments and relevant parties pertaining to the technical requirements and engineering aspects of the assigned projects.
5. Provide expertise and advisory support to enable operations are effectively and responsibly execute, and consistently maintain, quality workmanship and conformance to design and project specifications, and good manufacturing / engineering practices.
6. Respond and resolve technical / quality issues of the production orders among inter-departments / customers.
7. Participate in the implementation of risk assessment and risk control of medical devices

Competence Requirement:-

• NTC / Diploma / Degree in Precision Engineering / Mechanical / Mechatronics / Manufacturing field or equivalent.
• Fresh degree holder in engineering related field may be considered for Engineer position, while others educational holder must have relevant 3 – 8 years of experiences in precision engineering or equivalent field.
• Have sound and practical hands-on knowledge on the machining process such as CNC Mill / Turn is a plus.
• Preferably with hands on knowledge of CAD / CAM application software.

Responsibilities:

• Understanding customer or market needs to develop new ideas or innovate existing product

• Providing key features and benefits of the new ideas / innovations of existing product

• Create Pre-Analytics report

• Collect Data and analyse report

• Conduct testing for relevant certification and report

• Create or guiding Product Training documents (technical specifications, installation guide and user guide), Marketing material

Additional Information:

• Relevant educational qualifications in Degree in Electrical / Electronic / Mechanical / IT&D field

• Proficient in Windows, Word, Power Point, Photoshop, Excel and Access

• Good communication skill and good written and spoken in English and third language will be at advantage

• This position may need to communicate with China customer

• Willing to learn and explore new technologies

• Able work independently and also with other both indoor and outdoor locations

• Team player with ambition and determination to support company’s goals.

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Fresh can apply as on the job training will be provided

• Good working attitude and self-motivate

Responsibilities

• Responsible for reading, interpreting and drawing up technical drawing specifications
• Responsible in developing, coordinating, monitoring all aspects of the operational set up for projects assigned
• Responsible for working cross-functionally with different teams and organizations
• Responsible for applying Six Sigma/Lean Manufacturing methodologies for continuous process improvements and to improve operational efficiency

Requirements

• Min Nitec in Mechanical Engineering or relevant discipline
• Min 1 years of working experience in manufacturing industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026