Total 72 manufacturing engineer job vacancies in Manufacturing / Production category in D19 Serangoon Garden, Hougang, Sengkang, Punggol

For interested applicants, do apply directly on this link - https://beex.breezy.hr/p/ce28deac9ab7-manufacturing-engineer

Your Role

As the Manufacturing Engineer, you will report directly to the Chief Technology Officer (CTO). Your daily schedule will include frequent interactions with a multi-disciplinary team, across teams from design to manufacturing to operations. You will need to work in Singapore. Remote work is not an option.

Your Job Scope

• Manufacturing Plan: Coordinate with engineering and production departments to develop and implement Manufacturing Plan for products, by drafting work instructions & test plans, preparing BOMs, communicating to suppliers and training manufacturing personnel.
• Technical Support and Diagnosis: Technical support and troubleshooting of production issues related to equipment, processes, quality, controls, and systems. Identify defects or deviations from quality standards and perform root cause analysis to determine the underlying reasons for these issues
• Quality: Upkeep work quality on the manufacturing floor, by implementing quality control procedures such as: comprehensive incoming and outgoing quality inspections, compliance to work instructions, and implementing corrective actions on any lapses
• Record-keeping: Maintain detailed records of quality tests, inspections, and audits. Generating reports on quality performance and communicating quality issues to relevant stakeholders.
• Continuous Improvement: Identify areas of improvement from assembly procedures to tooling, to enhance product quality, manufacturing efficiency, and reduce defects
• Training: Provide training to staff on quality standards, procedures, and best practices to ensure that quality requirements are consistently met
• Supplier Quality Management: Collaborating with suppliers to ensure that raw materials and components meet quality specifications and standards.
• Compliance with Regulations: Ensuring that manufacturing processes comply with industry regulations, standards, and best practices to meet legal requirements and customer expectations.
• Provide day-to-day technical and engineering support to the operating areas.

Desired Qualities

• (MUST) Bachelor's Degree in Electronics, Computer or equivalent Engineering
• 3-6 years of experience in quality engineering or in manufacturing
• Working knowledge of product development and manufacturing processes
• Experience with quality control and test procedures for tests such as in EMI-EMC, Vibration, temperature, humidity testing is a plus.
• Experience with Altium designer and other equivalent PCB CAD software.
• Experience with any 2D schematic, wire harnessing and cable assembly design software.
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Excellent written and verbal communication skills
• Ability to work in a cross-functional team environment
• Excellent organization and time-management

Remuneration Package

• Market competitive salary
• Growth opportunities that align with your direct ability in helping the company, rather than an arbitrary corporate ladder
• Support for skills upgrading / learning credits
• Healthcare support
• Special access to industry events
• Well-stocked pantry with nice snacks

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around bringing our robot to market. You may be remunerated with a combination of salary and share options. This internship requires a candidate to have both an engineering background and a reasonable business acumen. Great communications skills are required as we work with many external contract manufacturers.

1. Pushing our product to pilot production (design for manufacturing, design for reliability, design for user-friendliness)
2. Connecting manufacturers and our R&D team to build and iterate on our prototype, creating new avenues for manufacturing at scale, manufacturing for reliability
3. Sourcing for and testing appropriate equipment and materials for R&D
4. Visiting industry trial sites, giving appropriate feedback to product development team
5. Speaking to industry players, ground workers, understanding the process of tile grouting to help us shape our solution, especially from an operational point of view
6. Hiring, recruitment, and outreach
7. Any other operational duties

A great candidate would possess the following:

• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back of the envelope calculations
• Keenness to do more than is expected, impact driven
• Growth mindset driven

Our development process is very iterative and agile. Thus, there would not be a concrete plan more than 2 weeks ahead and your role/tasks is/are likely to evolve over time. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. You would thus play a significant part in deciding how your work would contribute to our overall goals. Please email your resume to [email protected] if you are interested. Thank you

Responsibilities:

• Setting up of AOI machines.
• Machine alignment, teaching and testing.
• Ensure machine meet customer specifications.
• Able to do machine troubleshooting

Requirements:

• NITEC or Higher NITEC, Diploma in Mechanical or Electrical Engineering.
• With minimum 3 years of experience in the semiconductor industry.
• Experience in automation industry.

Summary:

Co-ordinate with respective factory teams including CLS Tech Support, CLS Production, HPE Procurement, Material team, HPE Product Engineering team, Test team etc. to ensure all area of focus are well prepared and ready for factory inspection.

Detailed Description:

Performs tasks such as, but not limited to, the following:

• Prepare product sample for agency inspection.
• Perform internal product compliance audits.
• Verify relevant documentation revision and content.
• Prepare and host Factory tour (Incoming Inspection/Production Lines/Finished Products/Lab/Testing areas) with auditor/HPE representative.
• Coordinate product safety factory inspection with relevant engineers (Test/PE/Procurement) and Production to ensure compliance to applicable HPE standards and product regulatory requirements.
• Pursue Supplier CoC availability by purchased batches as “verification of purchased parts” for critical component materials from relevant Proc Engr (e.g. power supply/ PCB/ plastic materials/ batteries/labels) that is requested by the agency auditor.
• Traceability of manufacturer and flame rating for incoming material e.g. plastic material/PCB used in products.
• Keep in touch with relevant Global Product Regulatory team to track and understand the updates to requirements.
• Report any regulatory changes/escalation to management and inform applicable departments.
• Track and maintain the latest version certificates and test reports from the certification body.
• Ensures that the processes are carried out and comply with the specifications required by customers and that it complies with the local requirements of the organization and the requirements of MPS (Manufacturing Process Standards)
• Ensures that the specifications, the acceptance criteria of the products by the operational staff are known and respected; ensures that operators comply with product quality inspection procedures in accordance with customer requirements
• Provides support in order to optimize processes, identifies and initiates opportunities to reduce costs
• Prepares and collects data from the key points of the processes and prepares the internal quality reports
• Monitors product yields, process (yield) and scrap rate (scrap) or other quality indicators
• Participates in the activities of PFMEA, 8D analysis and elaboration of Control Plan
• Assesses and updates working instructions for specific products

Requirements:

• Bachelor's Degree in relevant fields
• 4 to 6 years relevant experience
• Strong knowledge in manufacturing operations Understand quality tools such as FMEA, PMP, SPC, 8D methodology, etc
• Good understanding and familiarity with safety regulations such as UL, CSA, TUV, CCC and standards (60950-1, 62368-1), China standard GB 4943.1, GB 9254.1, GB 17625.1
• Good understanding in ISO 9001:2015 Quality Management System (Certified ISO Internal Auditor Preferred)
• Attention to Detail: Strong attention to detail is crucial for identifying potential safety issues.
• Team Collaboration: Ability to work effectively with cross-functional teams, including design, manufacturing, and quality assurance.
• Technical Knowledge: Understanding of product design, materials, and manufacturing processes, as well as quality and process improvements techniques and tools.
• Problem-Solving Skills: Strong analytical skills to identify potential safety issues and develop solutions.
• Communication: Excellent verbal and written communication skills for reporting and training, effectively communicate with a wide variety of internal and external customers teamwork skills;

OTHER INFO:-

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• Working Days / Hours: 8am to 5.30pm / 8.30am to 6pm (Mondays to Fridays)

-----------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

About the Company:

Addept3D is an AS9100-certified 3D printing firm that provides additive manufacturing systems and services for manufacturing large metal components and structures. With strong expertise in wire-based additive manufacturing, Addept3D employs proprietary technologies from its strategic partner, WAAM3D, to offer companies across different industries a suite of effective solutions for their manufacturing needs.

Established in 2021, Addept3D is a joint venture between Accuron Technologies and WAAM3D.

Additive Manufacturing (AM) Senior Technician (3rd Shift – 11 PM to 7 AM)

As a Senior AM Technician, you will assist the AM engineers in operating and managing the WAAM printing equipment. Your responsibilities will include:

• Set up, operate, and monitor large-scale robotic 3D printing equipment to produce parts according to Job sheet specifications.
• Prepare and load materials into the 3D printers, ensuring proper fixture, alignment and configuration.
• Monitor the printing process, perform regular inspections, and make necessary adjustments to maintain print quality and prevent issues.
• Follow standard operating procedures (SOPs) and safety guidelines to ensure a safe and efficient working environment.
• Maintain up-to-date production records and reports, accurately documenting work performed.
• Update the Supervisor on job status and report any non-conformance issues raised during fabrication.
• Perform equipment preventative maintenance.
• Perform other duties and responsibilities as assigned.

Qualifications, Key Skills & Desired Qualities:

• Higher Nitec/Nitec/ ITE Skills Certificate (ISC) or Certification in Welding or equivalent.
• 1 - 3 years of relevant experience in a manufacturing or production environment or similar advanced welding techniques.
• Able to work on permanent 3rd shift (11 PM to 7 AM).
• Able to work independently with a positive attitude and a team player.
• A good understanding of welding techniques.

If you are a skilled CNC Tool Manufacturing Technician with a passion for precision engineering and are considering a career in Additive Manufacturing (AM), we invite you to apply. Training will be provided.

Product area

In gTech Users and Products (gUP), our mission is to advocate for Google’s users by creating helpful and trusted experiences across the product ecosystem. We achieve this by meeting partners and consumers where they are with support and help, representing their needs with our product partners and proposing fixes and features that elevate their engagement with Google's diverse product ecosystem. Additionally we provide a range of product services that ensure our products are optimized for every user, no matter where they are in the world (e.g., localization, digitization, partner integration and more).

Job description

gTech’s Professional Services team takes a creative, collaborative, and customer-centric approach to provide foundational services and forward-looking business solutions to top advertiser and publisher customers. Through technical implementation, optimization, and key solutions, gTech Professional Services helps customers attain their business goals while building long-term capabilities.

Additional job description

In this role, you will be responsible for the technical relationship of our Distribution partners. You will collaborate with teams in Engineering, Business, and Product Management to use technologies for our internal or external clients/partners. From concept design and testing to data analysis and support, you will own the technical execution and work with business operations to distribute products such as Chrome, Lens, Android apps, and more. You will balance business and partner needs with technical constraints, develop innovative, solutions, and serve as a partner and consultant. You will also build tools and automate processes, oversee the technical execution and business operations of our products, as well as develop product strategy and prioritize projects and resources.

Qualifications

Job responsibilities

• Work with our Product, Engineering, and Partnership teams. Develop solutions, provide consulting services to our partners, build relationships, and know the partner's needs.
• Help partners in their day-to-day challenges by being the subject matter expert, delivering solutions, and troubleshooting their technical issues.
• Propose, design, create, and present proof-of-concept prototypes and demos to a variety of audiences, from engineers to marketing professionals.
• Perform implementation reviews. Advocate for new product features, and provide partner feedback to internal cross-functional teams including Product Management and Engineering.
• Deliver business intelligence. Use internal and external data sources to provide data insights to support decision making.

Minimum qualifications

• Bachelor’s degree in Engineering, Computer Science, a related field, or equivalent practical experience.
• 3 years of experience working with client-side web technologies (e.g., HTML, CSS, JavaScript, or HTTP).
• 3 years of experience coding with one or more programming languages (e.g., Java, C/C++, Python).
• Experience in technical troubleshooting, and managing internal/external partners or customers.

Preferred qualifications

• Master’s degree in Engineering, Computer Science, Business, or a related field.
• 5 years of experience in business intelligence, data analytics, or statistics.
• 5 years of experience working with systems (e.g. Linux, Unix).
• Excellent project management skills and attention to detail.
• Excellent problem-solving and troubleshooting skills.
• Ability to present to the technical level audience.

As an Manufacturing Central Team Assembly and Test Automation Project Engineer Automation Project Engineer, you are member of the Global Operations Team responsible for the worldwide portfolio of Automation projects aligned to Assembly and Test Operations objectives and corporate strategies and initiatives. You will develop, facilitate, and/or lead data-driven program management capabilities during Initiation, planning, and execution phases. You will identify risks early, manage issues, and drive initiatives to closure.

Job Responsibilities

• Collaborate with network teams - site automation, central/ site Process and Equipment Engineering, procurement, safety EHS in managing the automation projects
• Identify Project partners and manage expectations
• Identify and manage program projects dependencies
• Collect and document partner requirements
• Identify and resolve issues and conflicts
• Control project scope
• Communicate project expectations to team members and partners
• Coach, mentor, motivate, supervise, and provide recognition for projects
• Maintain project support through interaction with senior leaders
• Promote Program Management value and business practices to the organization
• Develop and deliver progress reports, proposals, requirements documentation, and presentations
• Identify potential crises, and develop and implement resolution plans
• Facilitate transition of system and business processes from project closure to long term sustainment
• Follows Company/Department Policies and Group expectations.
• Maintains a clean and safe working environment by proactively assessing the work (and surrounding) area and submitting work orders as needed.
• Recognizes and reacts to safety alarms (EES, fire alarm, MDA, etc.)
  Remains within Micron’s attendance policy.
• Displays a positive attitude toward Micron and its policies
  Holds self and other team members accountable for adherence to all company-wide safety procedures (PPE, EIPS).
• Observe all established EHS policies, requirements, and procedures.
• Understand and follow EHS guidelines included in work instructions.

Requirements:

- Bachelor's in Engineering or Science in fields such as mechanical, electrical, industrial, computer or automation.

- Minimum 3 years working experience in engineering semiconductor project management field

- Strong verbal and written communication skills

- Capability to lead teams and manage project team members

- Project Management Certifications are preferred

- Knowledge in automation, semiconductor process and systems are beneficial

- Experiences in supporting and leading global teams/projects

Job Description:

• Responsible for product quality assurance.
• Completes all administrative activities associated with quality inspection.
• Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards.
• Downloads quality information from quality system to be used for Quality reports.
• Plans and directs activities concerned with the establishment and/or continuance of process related requirements and other quality programs.
• Prepares quality documentation or equivalent.
• Prepares Statistical Process Control Charts where required.
• Responsible for authorizing the released of final products to customer.
• Supervises inspectors or technicians on the inspection plan.
• Directs inspectors or technicians engaged in measuring, inspecting and/or testing products or parts and tabulating data.
• concerning materials, product or process quality and reliability.
• Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering
• to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets
• through participation of EHS programs.
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Job Requirements :

• Diploma / ITC / NTC in Mechatronics/ Electrical & Electronics engineering or related discipline, preferably with 2 years in manufacturing environment.
• Proficiency in written and communication skills in English.
• Practical computer skills and knowledge with hands-on ability.
• Familiarity with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• Able to use microscope for inspection and verification.

We are seeking an engineer with opto-electronic product development experience, tasked with the mission of design, build and manufacturing of Si Photonics chips. The candidate must possess expertise in one of the following areas: opto-electronics, photonics, electronic circuit development, electronics board design, packaging design, or FPGA development.

Responsibilities

• Perform system-level optical and electronic test and measurements
• Prepare and develop prototype to products based on Photonics IC specifications and designs
• Source suppliers, establish supply chain and photonics manufacturing and collaborate with ODM/OEM/contract manufacturing partners

Qualifications

• PhD or Masters Degree in Science and Engineering, Physics, Applied Physics, or a related discipline in Optics and Photonics
• At least 2 years of working experience
• Candidate is expected to have experience in any one of the following areas: circuit and system, FPGA Development, or Advanced Packaging
• Experience in commercial Si Photonics product design and product engineering is preferred.

Quantitative Product Development Engineer (Trading)

Job Responsibilities:

• Actively participate in the development and maintenance of equity and futures products, ensuring consistent improvement in online service quality through technical solutions, and take responsibility for the reliability of live trading.
• Collaborate closely with researchers to enable various strategies, regardless of type or scale, to operate efficiently in live trading and generate substantial returns.
• Conduct research and integration of programmatic trading platforms, including implementing and deploying microsecond-level software solutions.
• Optimize the performance and latency of trading and order execution systems across dimensions such as computation, storage, networking, and hardware.

Job Requirements:

• Bachelor's degree or higher in Computer Science or a related field from a well-known domestic or international university, with over 2 years of work experience.
• Proficient in Linux operating systems and meet at least one of the following:a. Skilled in C++ and one scripting language.
  b. Skilled in Python 3 and one statically-typed language.
• Familiarity with production and iterative processes for online services, along with techniques for improving service reliability.
• Experienced with best practices such as Git, code review, and CI/CD, with a strong focus on tool-building and excellence in execution
• Experience in maintaining large-scale, highly complex, mission-critical products.Strong system design skills with expertise in performance, reliability, and availability.Hands-on development experience in any of the following areas: operating systems, databases, storage systems, or distributed systems.

Regret to inform that only shortlisted candidates will be notified.

www.dadaconsultants.com

EA Registration Number: R1878287

Business Registration Number: 201735941W.

Licence Number: 18S9037

This role is within Package and Development Engineering (PDE) group of Micron. This is a global department with teams located in USA, Singapore, Malaysia, Taiwan, and India. As a PDPE (Package Device Product Engineer) in PDE, you will be responsible to prepare for new DRAM, NAND or MNAND products and coordinate resources, testing, and analysis over the lifecycle of the product. You will run data analysis and modelling, create, and maintain root cause analysis documentation, analyze parametric, probe level (Front End) and electrical test (Back End) data and respond to failures. In this role, you will work with various Technology Development (TD) & New Product Introduction (NPI) Engineering (Electrical Failure Analysis (EFA), Physical Failure Analysis (PFA), Assembly) and Manufacturing groups to find the root causes of the failed units.

Responsibilities and Tasks

• Enable new test signals in BE which would capture assembly related failures.
• Work with Test Solution Engineering (TSE) & Product Engineering (PE) to ensure standardize test coverages & chars. Define Char limits, and approval of any test related changes.
• Development of new out-of-control-action-plan (OCAP) and its sustenance
• Provide Lot disposition based on parametric data observation in case of out-of-control (OOC) trigger.
• Ensure that Silicon & assembly process meets Product expectations by extracting and analyzing Probe and BE test data.
• Participate in Phase Gate review meetings, presenting the data analysis and deciding on Phase Gate exits related to electrical Test data.
• Analyze test failures, coordinating EFA & PFA to identify the root cause. Implement fixes for fails (Fab process or Design or Assembly Process)
• Finding out the correlation of test failures to assembly process and updating the database with the signatures observed
• Support Global and Local material review board (MRB) in case of excursions and RMA related to package intrinsic design. This includes analyzing electrical test data for root cause analysis (RCA) and assessing the health of the contained material.

Requirements

• Bachelors/ Masters in Electronics, Device Physics, Applied Physics, Electrical
• Sound knowledge of device physics
• Knowledge in Engineering Statistics
• Experience in data (electrical) analysis and modelling (JMP, Spotfire is a plus)
• Experience in programming (Python or Perl)
• Effective communication skills in written and spoken English
• Good multitasking and organizational skills, able to make decisions in complex situations
• Excellent problem solving and analytical skills
• Experience in NAND / DRAM memory or related field
• Knowledge in semiconductor packaging assembly processes
• Experience in fabrication processes, electrical characterization techniques, metrology techniques

Job Description

The Engineer will be responsible for driving electro-mechanical product development in compliance with ISO 13485 standards across multiple levels, from component to product. The role includes planning and monitoring New Product Introduction (NPI) programs, managing engineering changes, and maintaining documentation, including Design History Files. The position requires close coordination with both internal and external suppliers, adhering to Quality Management System and regulatory standards.

Key Skills and Experience:

• Bachelor degree in Mechanical Engineering with 3+ years in electro-mechanical systems.
• Technical proficiency in optimizing designs for mechanical and electro-mechanical systems.
• Solid understanding of metal and plastic manufacturing processes for product design.
• Proficiency in 3D CAD software (e.g., SolidWorks), including GD&T and kinematic calculations.

Attributes:

• Analytical and detail-oriented, with a collaborative and hands-on approach.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Basic salary: ($3,000 - $4,200)

Location: Serangoon

Working hours: Mon - Fri, 8.30am to 6pm

Job Description

• Plan materials requirement according to production schedule and to ensure optimal inventory levels
• Monitor production schedule to meet delivery requirement
• Work closely with Testing team and arrange production staff to work according to schedule

Job Requirements

• Diploma in Manufacturing / Production / Electronics Engineering
• Minimum 2 years of relevant work experience in electronics manufacturing industry
• Experience with ERP system
• Team player with supervisory, interpersonal and communication skills
• Able to communicate in both English and Mandarin to work closely with internal customers, buyer and sub-contractors

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

What you will do

• CPU Testing Binning Strategy & Realization
• Production volume ramp-up support which includes fast-turn-around test program delivery/optimization and cost reduction through yield optimization and test time reduction
• Cross collaboration with Design/DFT/DV/TE team to enable efficient test-case simulation and (mini)ATE bring-up

What you will bring

• Bachelor/Masters Degree in Electrical/Computer Engineering
• Min 3 years of CPU related Chip Mass Production Experience is a MUST.
• Software+Hardware Testing PCB built
• Familiarity with CPU Testing (ARM/MIPS/SNPS...)
• Cross-site working experience is a MUST.
• Experience with Foundry, Post-Silicon, FPGA, DVT, SLT debug is a PLUS.
• Smart-Phone Adv. ASIC consumer product HW design experience is a PLUS.

Location: One North, Singapore

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Responsibilities

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

Competency Requirements

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around bringing our robot to market. You may be remunerated with a combination of salary and share options. This internship requires a candidate to have both an engineering background and a reasonable business acumen. Great communications skills are required as we work with many external contract manufacturers.

1. Pushing our product to pilot production (design for manufacturing, design for reliability, design for user-friendliness)
2. Connecting manufacturers and our R&D team to build and iterate on our prototype, creating new avenues for manufacturing at scale, manufacturing for reliability
3. Sourcing for and testing appropriate equipment and materials for R&D
4. Visiting industry trial sites, giving appropriate feedback to product development team
5. Speaking to industry players, ground workers, understanding the process of tile grouting to help us shape our solution, especially from an operational point of view
6. Hiring, recruitment, and outreach
7. Any other operational duties

A great candidate would possess the following:

• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back of the envelope calculations
• Keenness to do more than is expected, impact driven
• Growth mindset driven

Our development process is very iterative and agile. Thus, there would not be a concrete plan more than 2 weeks ahead and your role/tasks is/are likely to evolve over time. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. You would thus play a significant part in deciding how your work would contribute to our overall goals. Please email your resume to [email protected] if you are interested. Thank you

Our client is a top-tier global pharmaceutical powerhouse, committed to pushing the boundaries of medical innovation and delivering breakthrough treatments to patients worldwide. Be a part of a mission to transform healthcare and make an impact on patients' lives.

As the Senior Production Engineer, you'll be at the forefront of R&D manufacturing operations.

Your Role:

• Manage R&D manufacturing operations and be a technical expert in the process.
• Refine manufacturing techniques, lead method validation projects, and be the go-to expert for training operators on Standard Operating Procedures (SOPs).
• Documenting crucial process safety and risk assessments, maintaining the highest standards of excellence.

Requirements:

• Background in a regulated manufacturing environment (pharmaceutical or biotechnology preferred).
• Master's or PhD in Chemistry, Chemical Engineering, or Pharmaceutical Sciences.
• 5+ years of hands-on experience in formulation development.
• In-depth understanding of GMP, process development, validation, and pharmaceutical quality systems.
• Proven track record in pharmaceutical formulation development and technology transfer.

If you are interested, please apply with your CV attached.

Responsibility:

1. Collect and summarize product demand, participate in product demand assessment and optimization;
2. Competitor information collection& analysis;
3. Planning product promotion according to R&D and marketing research;
4. Provide customer support and product solutions training;
5. Participate in important project product selection, solution providing, bidding scheme and implementation plan evaluation;

Requirement:

1. Bachelor degree or above, major in computer, communications, electronics or related
2. More than 5 years working experience in security industry, 1 year experience in product or pre-sale
3. Good communication ability, can work under pressure

Job Description:

• Responsible for supporting yield improvement, driving, and managing the continuous yield and quality improvement for various devices.
• Responsible for having close interaction with Product Test Engineering team and communicate technical product status to management.
• Responsible for following up with Foundries and test subcontractors to resolve low yield/reliability issues.
• Responsible for monitoring of parameter test and wafer sorting yield with in-depth analysis using various statistical data analysis tools and understand on semiconductor process knowledge, e.g., inline d0, ET, CPK etc.
• Develops failure analysis methodologies as required for assigned projects to enable rapid problem solving with support of internal and external parties.

Requirements:

• Degree/Master’s in Electrical Engineering, Microelectronics or related discipline.
• Strong analytical problem-solving skills.
• Capability of mass data analysis.
• Min 2 years of experience in Product Engineering.
• Salary package will be offered based on working experience.

Job Responsibilities:

• Manage day to day operation based on inventory needs, new product introduction, equipment efficiency and resource optimization while maintaining GMPs compliance.
• Streamline company’s production process in order to maintain an efficient and effective team.
• Perform Quality Measures of staff performance.
• Assist in Internal Quality Audits (IQA).
• Plan, organize, direct and control of daily production with production supervisor.
• Evaluate, improve product quality, production efficiency, work procedures and safety enhancement in accordance to food safety and GMPs.
• Manage cost performance and be responsible for daily production yield and output.
• Staff development and improve staff competency.
• Preparing monthly production report, provide support for new product launch and to review documents and reports.

Job Requirement:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in any field.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Preferably Senior Executive specialized in Manufacturing/Production Operations or equivalent.
• FMCG / Food Manufacturing experiences will be advantage
• Knowledge of ISO22000:2005, BRC issue 8, HACCP
• Knowledge of Business Central 365 (Microsoft Dynamic Navision)
• Microsoft office (excel, powerpoint, outlook)

Interested applicant may send your cv/ resume via whatsapp 84597671

If you are looking to expand your career in Manufacturing and Operations field, Emerson has an excellent opportunity for you! We are seeking a Senior / Manufacturing Supervisor who can facilitate optimizing processes for warehouse operations and productivity improvements through initiatives.

In this Role, Your Responsibilities Will Be:

· Lead all aspects of Production Operations to fulfill customer orders on time.

· Improve processes within Production to reduce waste and lead time.

· Drives Continual Improvement Initiatives to ensure Zero-defect system and Eliminate workflow interruptions.

· Accountable for inventory accuracy in Production WIP and Finished goods.

· Drive efficiency and speed improvement for Production and Material flow processes through digitalization and automation initiatives.

· Backup for Production Supervisors to implement accurate and timely completion of work orders.

· Responsible for maintaining high safety and 5S standards.

· Ensure compliance of workplace safety rules, including but not limited to the usage of personal protective equipment, if provided to you, while working; not involved in any unsafe or negligent act that may endanger peers or oneself; reporting unsafe work conditions and providing suggestions to improve safety/ health at work, as needed.

Who You Are:

You show a tremendous amount of initiative in tough situations; are outstanding at spotting and seizing opportunities. You always keep the end in sight; put in extra effort to meet deadlines. You model and encourage the expression of diverse ideas and opinions. You get the most out of available resources and secures rare resources others can’t get.

For This Role, You Will Need:

· Minimum 3 years of working experience in a manufacturing and warehousing companies.

· Great teammate who can collaborate with other functional teams to get results and meet business goals.

· A person with good communication and problem-solving skills.

Preferred Qualifications that Set You Apart:

· Degree/Diploma or equivalent experience in Manufacturing, Production, Mechanical or Electrical Engineering or any related field.

· Knowledge of Lean, SPC tools or Oracle business system will be an advantage.

Please submit your application on or before 27 October 2024.

Our Offer To You:

By joining Emerson, you will be given the opportunity to make a difference through the work you do.

Emerson's compensation and benefits programs are designed to be competitive within the industry and local labor markets. We also offer a comprehensive medical and insurance coverage to meet the needs of our employees.

We are committed to creating a global workplace that supports diversity, equity and embraces inclusion.

We attract, develop, and retain exceptional people in an inclusive environment, where all employees can reach their greatest potential. We are dedicated to the ongoing development of our employees because we know that it is critical to our success as a global company.

We have established our Remote Work Policy for eligible roles to promote Work-Life Balance through a hybrid work set up where our team members can take advantage of working both from home and at the office.

Safety is paramount to us, and we are relentless in our pursuit to provide a Safe Working Environmentacross our global network and facilities.

Through our benefits, development opportunities, and an inclusive and safe work environment, we aim to create an organization our people are proud to represent.

Our Commitment to Diversity, Equity & Inclusion

At Emerson, we are committed to fostering a culture where every employee is valued and respected for their unique experiences and perspectives. We believe a diverse and inclusive work environment contributes to the rich exchange of ideas and diversity of thoughts, that inspires innovation and brings the best solutions to our customers.

This philosophy is fundamental to living our company’s values and our responsibility to leave the world in a better place. Learn more about our Culture & Values and about Diversity, Equity & Inclusion at Emerson.

If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: [email protected].

Job Responsibilities

· Read, learn, understand, and interpret drawing/blueprints and work instructions, and other instructions written or verbal, to complete the crating of tools/products or components according to established guidelines and quality standards.

· Manage inventory following established guidelines and procedures including labeling and locating parts, picking parts from appropriate locations specified, and recording and communicating inventory levels.

· Help customers resolve shipment issues and complaints when they arise. Maintain shipment paperwork, records, and digital databases and perform additional administrative, clerical, or supervisory duties as requested.

· Support internal and other relevant departments (e.g. Planners and productions) to ensure all orders/shipments are fulfilled on time. The need to coordinate with CM to perform GR, coordinate with traffic and third-party warehouse to re-label shipment, and release to forwarders for shipment arrangement.

· Fulfill orders by packaging necessary materials and preparing them for shipment. Identifying and locating the right products during the shipping process Recording inventory status, and making sure deliveries properly match work orders.

· Collaborating with internal departments to locate missing packages, fix incorrect deliveries, and replace damaged products. Practice problem-solving and troubleshooting techniques as part of a team responsible for realizing continuous improvement to products and processes.

· Maintain a clean and organized work area, and workplace safety, and maintain all equipment according to maintenance plans and established procedures.

· Require supporting operations during weekends and public holidays. Undertake any other ad-hoc duties assigned by the superior.

Job Requirements

• Diploma or its equivalent
• PC literate. Preferably with experience in crating/capital equipment handling.
• A team player with the ability to multi-task and organize work systematically.
• Process Improvement mindset
• Ability to work under pressure in a fast-changing and demanding environment.
• Hardworking, self-driven, willing to learn, and able to take initiative.
• Knowledge of SAP and having a forklift license will be an added advantage.

As a Manufacturing Engineer at MSB, you will be responsible for executing area resource plans in terms of logistics and indirect piece parts and managing, developing employee performance.

In this role some of the tasks that need to carried out include exploring continuous improvements activities to assist area management in running the production in a cost efficient and effective manner. You will need to forecast unplanned or ad-hoc staffing and training needs, monitor area performance and provide performance feedback, mentoring, and career development where appropriate.

Other responsibilities include ensuring a safe work environment by performing regular work area inspections and conducting timely event investigations. You will be working with various engineering and manufacturing groups throughout the company.

Requirements

• Bachelors / Masters in Mechanical Engineering, Mechatronics Engineering, Electrical and Electronics Engineering, Materials Engineering, Industrial & Systems Engineering, Chemical Engineering or related field.
• Has leadership experience and potential
• Strong project management, analytical skills and problem solving skills
• Possess good communication and interpersonal skills, with the ability to work effectively with multiple multi-functional teams.
• Knowledge of Semiconductor processes, engineering and/or manufacturing operations
• Background in Overall Equipment Effectiveness (OEE) and/or Lean manufacturing fundamentals will be beneficial

Keen for the role? Apply now!

Develops, implements and maintains methods, operation sequence and processes in the manufacture or fabrication of parts, components, sub assemblies and final assemblies. Interfaces with design engineering in coordinating the release of new product. Estimates manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines. Maintains records and reporting systems for coordination of manufacturing operations.

NPI Production Senior Supervisor

Responsibilities:

- Lead new project line set-up for new medical device products

- Develop and implement production processes

- Supervise production teams & provide mentor and support.

- Ensure quality standards and compliance

- Collaborate with cross-functional teams

Requirement:

- 5+ years of experience in medical device production

- Proven leadership and supervision skills

- Strong knowledge of industry regulations and standards (Such as ISO13485/ ISO9001, FDA audit experience)

- Excellent communication and problem-solving skills

• Familiarity with multi-tier server architecture (Application, Web, Database).
• Hands-on experience with Oracle, SQL Server, or MariaDB.
• Proficiency in web services, including protocols like SOAP & REST.
• Knowledge of system applications such as backup software, Application Server - Jboss, Web Server - Apache, Messaging system - MQ / AMQ
• Experience in CI/CD pipeline tools like Jenkins using OpenShift cloud platform