Total 1,743 process engineer job vacancies in Manufacturing / Production category in singapore

Production Engineer

• Working hours: 5 Days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $6000

Position Summary:
The Production Engineer is responsible for improving the production technology of the EVAL site which will be launched in second half of 2026. The Production Engineer supports the production team for identifying, investigating, and resolving production issues in technical aspects. The Production Engineer leads technology for process control (DCS, SIS), operation condition, and product quality improvement and joins project work related to production technology development and improvement. Until the startup of EVAL production line, training and learning opportunities of EVAL production technology is provided by experienced members in Company. The Production Engineer will be a member of the commissioning and startup team of new EVAL plant and is responsible for designing and optimizing the process condition and process control system (DCS) and supports other production team members to achieve safe and stable commissioning and startup of new EVAL plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Preferred Requirements:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction process, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programming and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

1. Packing of finished product into paper bags weighing 20kg to 25kg
2. Stacking of finished product packed in paper bags onto wooden pallets
3. General housekeeping of work area
4. Ad hoc duties as assisgned by supervisor
5. Candidate will be trained to run production of chemial processes when more experienced
6. Protective gear must be worn during work (E.g. safety helmet, mask, ear plugs, gloves, safety boots)

• MNC Company
• Basic $4500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 4.30pm

Job Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC Company
• Basic $4500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 4.30pm

Job Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description:

• Responsible for the end to end manufacturing process and resolving production related issues
• Coordinate with Supply Chain, P&D and QA&RA departments to ensure sufficient stock levels
• Able to lead and understand challenges due to business nature and help enable/shape improvements to operational management systems and processes
• Prepare forecast capacity planning, monitor factory output, plan, organize and allocate of resources to meet delivery requirements
• Managing, leading and motivating the staff to build team spirit and to maintain high morale
• Ensure effective, efficient and timely execution of planned production schedule
• Implementing new technology to increase efficiency and productivity in the production process
• Ensure smooth running of all operations in an appropriate and cost-effective manner
• Ensure all finished goods are in full compliance with customer specifications and company regulatory requirements and standards
• Perform quality controls and monitor production KPIs
• Recruit, train and supervise staff
• Other duties assigned by the Company as and when necessary

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

• MNC Company
• Basic $4500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 4.30pm

Job Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Monday to Friday

730am - 5pm

Location: Tanjong Penjuru

Responsibilities

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas.
• Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary.
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Requirements

• Minimum 5 years working experience in manufacturing environment (main criteria)
• Able to supervise and lead the subordinates.
• 3Willing to work after working hour or during non-working days.
• Able to work under pressure.
• 5Computer literate.
• Knowledge in ISO is an advantage.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Devon Yang Yue Teng | EA Personnel No.: R24123723

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Configure semiconductor devices, troubleshoot issues, and document engineering advancements.
• Create procedures for machinery assembly, assessment, and testing.
• Work with engineering and software teams to enhance system architecture.
• Partner with multidisciplinary engineers to address system challenges.

Requirements

• Experience in setting up automated systems.
• Proficient in electro mechatronic systems.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

· Design mechanical and electro-mechanical components.

· Integrate mechanical and electro-mechanical components into subsystems and assemblies.

· Perform system packaging and high-level assembly modeling.

· Perform interference analysis, design, and review designs per safety codes.

· Analyse and respond to issues found at supplier or manufacturing sites during manufacturing assembly, integration, and test.

· Develop or modify parametric 3D models and 2D drawings of designs including any mechanical routings as required.

· Perform geometric dimensioning and tolerance with capabilities at a level1 certification level.

· Release drawings and modify drawings using CAD tools.

· Complete other engineering documentation if required concomitant with design release.

· Conduct lab testing / evaluation of components if required.

· Communicate with counterparts in Asia, Europe, and USA on a regular basis for various engineering projects.

· Work with R&D team and identify new innovations and engineering research.

· Create and maintain task calendar outlining engineering projects, results and provide reports as required.

· Advise whether the product has a market demand and provide data analysis.

· Must be able to work independently and in teams, handle multiple tasks and able to work to a high standard in an environment where tight timelines / deadlines are normal course.

Job Description & Key Responsibilities:

We are seeking a talented Product Engineer to join our innovative solar technology team, focusing on the development and optimization of perovskite thin-film solar modules. This role combines materials science expertise with manufacturing process optimization to advance our next-generation solar technology.

* Lead the development and optimization of perovskite solar module manufacturing processes

* Design and execute experiments to improve module efficiency, stability, and scalability

* Analyze production data and implement process improvements to enhance yield and performance

* Collaborate with R&D teams to transition new technologies from lab to manufacturing scale

* Develop and maintain product specifications and process documentation

* Troubleshoot technical issues in the manufacturing process and implement solutions

* Work with suppliers to qualify materials and establish quality control protocols

* Ensure compliance with safety protocols and environmental regulations

Qualifications Requirements

* Bachelor's degree or Master in Materials Science, Chemical Engineering, or related field

* 3+ years of experience in thin-film solar technology or semiconductor manufacturing

* Strong understanding of perovskite materials and solar cell physics

* Proficiency in characterization techniques (XRD, SEM, UV-Vis spectroscopy)

* Knowledge of statistical process control and Design of Experiments (DOE)

* Experience with scaling up laboratory processes to production

Preferred Qualifications Requirements

* Direct experience with perovskite solar cell fabrication and characterization

* Knowledge of international solar industry standards (IEC, ASTM)

* Experience with automated manufacturing systems and process control

* Background in failure analysis and reliability testing

* Programming skills for data analysis (Python, R, or similar)

* Experience with clean room operations

* Project management experience

Technical Skills Requirements

* Excellent technical skills on Thin-film deposition techniques, materials characterization, process optimization and quality control

* Able to handle data analysis and statistical methods

* Familiar with Clean room protocols and safety and environmental procedures

Personal Qualities and Communication Requirements

* Strong analytical and problem-solving abilities

* Excellent communication skills

* Detail-oriented with strong documentation habits

* Ability to work effectively in cross-functional teams

* Innovation mindset with practical implementation skills

* Results-driven with a focus on continuous improvement

What We Offer

* Opportunity to work on cutting-edge solar technology

* Competitive salary and benefits package

* Professional development opportunities

* State-of-the-art research and manufacturing facilities

* Collaborative work environment

* Potential for patent development and publication

Job Type

* Full time, up to 20% overseas travelling for supplier and customer site visits

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Configure semiconductor devices, troubleshoot issues, and document engineering advancements.
• Create procedures for machinery assembly, assessment, and testing.
• Work with engineering and software teams to enhance system architecture.
• Partner with multidisciplinary engineers to address system challenges.

Requirements

• Experience in setting up automated systems.
• Proficient in electro mechatronic systems.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

This role is within Package and Development Engineering (PDE) group of Micron. This is a global department with teams located in USA, Singapore, Malaysia, Taiwan, and India. As a PDPE (Package Device Product Engineer) in PDE, you will be responsible to prepare for new DRAM, NAND or MNAND products and coordinate resources, testing, and analysis over the lifecycle of the product. You will run data analysis and modelling, create, and maintain root cause analysis documentation, analyze parametric, probe level (Front End) and electrical test (Back End) data and respond to failures. In this role, you will work with various Technology Development (TD) & New Product Introduction (NPI) Engineering (Electrical Failure Analysis (EFA), Physical Failure Analysis (PFA), Assembly) and Manufacturing groups to find the root causes of the failed units.

Responsibilities and Tasks

• Enable new test signals in BE which would capture assembly related failures.
• Work with Test Solution Engineering (TSE) & Product Engineering (PE) to ensure standardize test coverages & chars. Define Char limits, and approval of any test related changes.
• Development of new out-of-control-action-plan (OCAP) and its sustenance
• Provide Lot disposition based on parametric data observation in case of out-of-control (OOC) trigger.
• Ensure that Silicon & assembly process meets Product expectations by extracting and analyzing Probe and BE test data.
• Participate in Phase Gate review meetings, presenting the data analysis and deciding on Phase Gate exits related to electrical Test data.
• Analyze test failures, coordinating EFA & PFA to identify the root cause. Implement fixes for fails (Fab process or Design or Assembly Process)
• Finding out the correlation of test failures to assembly process and updating the database with the signatures observed
• Support Global and Local material review board (MRB) in case of excursions and RMA related to package intrinsic design. This includes analyzing electrical test data for root cause analysis (RCA) and assessing the health of the contained material.

Requirements

• Bachelors/ Masters in Electronics, Device Physics, Applied Physics, Electrical
• Sound knowledge of device physics
• Knowledge in Engineering Statistics
• Experience in data (electrical) analysis and modelling (JMP, Spotfire is a plus)
• Experience in programming (Python or Perl)
• Effective communication skills in written and spoken English
• Good multitasking and organizational skills, able to make decisions in complex situations
• Excellent problem solving and analytical skills
• Experience in NAND / DRAM memory or related field
• Knowledge in semiconductor packaging assembly processes
• Experience in fabrication processes, electrical characterization techniques, metrology techniques

JOB SUMMARY

Snr Manufacturing Engineer (Medical) will be responsible for planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site. The Engineer will adopt as its goals profitability, effectiveness, adaptability, responsiveness, quality, and the continuous improvement of products and services throughout their life cycles.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Strong Knowledge in Healthcare business with ISO 13485 & FDA regulatory would be added advantage.

• Knowledge of assembly drawings, as well as the ability to interpret part drawings and specifications, is essential.

• Report writing, perform DFM and able to communicate within internal and external stakeholders. Able to perform Assembly process for High Level Assembly (HLA). Create procedures for processes and train staffs accordingly.

• Strong understanding on PFMEA, Process Flow, Control Plan and Process risk Assessments.

• Communicate frequently with operations, technical, and quality representatives within area of support through the tier process.

• Provide leadership and commitment in supporting continuous improvements in quality, productivity, and delivery performance through the deployment of continuous improvement framework.

• Reviews all inputs from the Engineering Department, including ECOs, new product releases, configuration control policies, and marking requirements, while also participating in the Design for Manufacturability (DFM) process.

• Solid understanding on BOM, ECN process, PCN and shop floor management will good plus.

• Monitor and continuously enhance daily quality and efficiency performance in assigned areas. Familiarity with Lean tools, such as Cycle Time, TAKT Time, and LBR, is crucial for assessing waste reduction and overall improvement.

• Participate in new product development by collaborating with R&D, New Product Development, and Quality teams to offer Design for Manufacturability guidance on hardware. A solid understanding of mechanical design is essential.

• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply with all procedures within the company security policy.

REQUIREMENTS:

Candidate must possess at least a Diploma, Degree, Engineering (Mechatronic/Mechanical) or equivalent. At least 5 year(s) of working experience in the related field is required for this position.

Must-Have

• experience in Backend Semiconductor industry.

Core Responsibilities

• Build up cost models to provide package cost estimates and manufacturing readiness inputs to business unit, engineering and factory
• Support critical meetings with internal cross functional teams on product / package costing
• Develop relationships with factory, sales and business units to ensure alignment with industry and customer trends
• Responsible for production pricing maintenance duties, including approving pricing issues in SAP
• Assist global sales take-or-pay coordination and reconciliation
• Adhoc analysis of various revenue related items

Job Specifications

• BS degree in Engineering.
• Minimum 2 years of relevant experience in Backend semiconductor industry.
• Direct experience and/or strong familiarity with semiconductor Leadframe, Wirebond, Substrate or FlipChip opportunities is a plus.
• Demonstrated understanding of manufacturing processes and raw materials.
• Advanced Excel usage and large data set manipulations.
• Strategic thinker with a proven ability to translate technical requirements/issues into the business context or vice versa.
• Able to work independently and to multi-task, excellent communication and presentation skills and working across functional groups as well as cross-culturally.

Interested applicants, please kindly email your update resume to [email protected]. We regret to inform that only shortlisted candidates will be notified.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Manufacturing Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Mon – Fri, 8.00 am – 6.00 pm)
• Salary Package: Basic salary up to $4,300 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Help with New Production Introduction tasks: develop manufacturing processes, design tools, create schedules, control costs, support sourcing, qualify quality, support tests, reduce product costs, and introduce products into the supply chain.
• Lead technical aspects of manufacturing processes for cables, harnesses, mechanical assemblies, inspections, and testing, including designing tools and fixtures.
• Utilise knowledge of electrical/electronic equipment production and testing methods.
• Manage multiple priorities under tight deadlines to successfully complete and make projects profitable.
• Collect data and create manufacturing solutions and documents to support OMS, SOE, MI, drawings, and specifications.
• Perform assembly tasks and guide technicians/operators as needed.

APPLY NOW!!!

• Diploma or Degree in Electrical / Mechanical Engineering or a related professional certification.
• Proficient in Microsoft Excel to compare and study Bill of Materials (BOM).
• 2-5 years of relevant experience in related industry.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67156 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Looking for Intelligent Manufacturing Engineer

1. MS or BS degree and above majoring in Industrial Engineering, Manufacturing, Production Engineering, Industrial Management, Information System, Mechanical and Automation Engineering, Civil, Applied Mathematics and statistics or related field.

2. Strong experience in semiconductor manufacturing experience is highly preferred.

3. Demonstrated knowledge of OM, IE, IT or related field is required.

4. Having the semiconductor processes knowledge is preferred.

5. Adequate in English and Mandarin.

6. Must be an enthusiastic and dedicated individual with the capability to motivate and lead a team

Be free to contact me if you are interested

About The Role

Zero-Error Systems (ZES) is seeking a Product Engineer to join our team and help us revolutionize the industry. As a Product Engineer, you will join a team of specialised engineers to design, verify, test, and operationalise our System-on-Module (SoM) products by using high-performance Field Programmable Gate Arrays (FPGA) SoC devices.

Key Responsibilities

• Work closely with the product development team, and be involved in the FPGA product development lifecycle including system design, IP development, testing, application-use case, and production
• Contribute to the full design methodology (from front-end to back-end) based on FPGA, including the design of customized circuits/Intellectual Properties (IPs)/systems and the configuration/programming of macro-IPs (e.g, ARM cores, and communication interfaces) within FPGA cores
• Create and review the test programs to support and validate the FPGA product development
• Support the FPGA design upgrade
• Maintain and provide good documentation for the FPGA product development
• Any other duties assigned

Key Requirements

• Degree holder (Electrical/Electronics/Computer) with minimum 2 years of relevant working experience in FPGA hardware such as Xilinx or Altera
• Good knowledge of Verilog register-transfer-logic design and hardware functional verification concepts/test methodology is desirable.
• Hands-on experience in FPGA development tools such as AMD/Xilinx VivadoExperience in digital design and embedded software development using FPGA will have added advantage.
• Comfortable in Linux environment, and programming skills/experience in C/C++ are preferred.
• Good problem solving and failure analysis skills
• Good team player and results-oriented
• Excellent communication skills

Measures of Performance

• FPGA Platform - Setup/Installation/Maintenance of an FPGA platform to support the product development
• Hardware/Software Validation - Together with the team, qualify/quantity the performance/functional of the FPGA products, including Hardware/Software co-design
• Product Demonstration - Together with the team, demonstrate the application use-case for the FPGA products

For interested candidates, please forward your resume to ZES HR at [email protected]

• Support component selection, engineering evaluation, and testing of parts and sub-modules for vision inspection equipment.
• Develop electrical parts and sub-modules for vision inspection equipment.
• Update product design documents, drawings, and BOM (Bill of Materials).

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent.
• At least 2 years of relevant working experience
• Proficient in CAD software for electrical and schematic design, as well as PC hardware, Windows OS, and software.
• Knowledge in PCB/PCBA design, fabrication, and testing processes is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Position Overview:
We are seeking an experienced and detail-oriented Optical Manufacturing Engineer to join our team. This role involves designing, developing, and optimizing manufacturing processes for optical components and systems. The ideal candidate will have 3 years background in optical engineering, manufacturing techniques, and quality control processes, ensuring the production of high-precision optical products. Fresh graduates with mechanical engineering .are encourage to apply too, we will provide training.

Key Responsibilities:

1. Process Development and Optimization:
   • Design and implement manufacturing processes for optical components, including lenses, mirrors, prisms, and coatings.
   • Optimize fabrication methods such as grinding, polishing, coating, and assembly to improve efficiency and precision.
2. Production Support:
   • Collaborate with production teams to troubleshoot and resolve manufacturing issues.
   • Ensure that all production processes meet quality and performance specifications.
3. Equipment and Technology Management:
   • Specify, procure, and maintain manufacturing equipment for optical production.
   • Develop and implement advanced technologies, such as automated systems and CNC machines, to enhance production capabilities.
4. Quality Assurance:
   • Develop and maintain quality control procedures to ensure compliance with industry standards (e.g., ISO 9001, MIL-PRF-13830).
   • Perform inspections, measurements, and testing of optical components using interferometers, profilometers, and other metrology tools.
5. Design Collaboration:
   • Work closely with optical designers to ensure manufacturability of new products.
   • Provide feedback on design adjustments for optimal production results.
6. Documentation and Reporting:
   • Prepare and maintain detailed process documentation, work instructions, and technical reports.
   • Analyze production data and report on key performance indicators (KPIs).
7. Continuous Improvement:
   • Lead initiatives to enhance product yield, reduce costs, and improve cycle times.
   • Stay updated on the latest trends and advancements in optical manufacturing and incorporate them into the production process.
8. Documentation:
   • responsible to create, review and maintain customer’s and Company’s technical drawings as well as Part Number Creation/Maintenance. Very similar to product engineering tasks and roles, but listed as Quality Assurance to control the Company’s standard
9. Performs other miscellaneous duties as assigned.

You will be responsible for integrating and testing software solutions in simulation and on the robot. We are looking for engineers who are interested in tackling challenging problems for our robots.

Responsibilities:

•Participate in new product development from concept to launch.

•Manage and co-ordinate with various departments, to develop product fulfilling to product design specification, keeping schedule, cost and quality.

•Identify and resolve all issues effectively to achieve all objectives.

•Acquire product design specification approval from stakeholders before product development.

•Translating customer’s needs and pain points into product design specifications.

•Establish and carry out test procedures for products to meet to product design specification.

•Establish assembly drawing to the manufacturing team for production purposes.

•Ensure proper documentation (including manuals) of all required information for product.

•Support product installations and any necessary diagnoses, troubleshooting, service, and repair.

•Provide product training and support internally.

Requirements:

•2-3 years working experience in relevant fields.

•Min. education qualification: Bachelor Degree in Robotics System, Computer Engineering, Electrical Engineering

•Strong foundation in Electrical, Mechanical and Software System

•Demonstrate deep interest & understanding in robotics field

•Experience in developing on actual physical robot is a plus

•Experience in any of the following C++, Python, ROS, JS, Git, Autodesk Eagle, Autodesk Inventor is a plus

Job Description

The Engineer will be responsible for driving electro-mechanical product development in compliance with ISO 13485 standards across multiple levels, from component to product. The role includes planning and monitoring New Product Introduction (NPI) programs, managing engineering changes, and maintaining documentation, including Design History Files. The position requires close coordination with both internal and external suppliers, adhering to Quality Management System and regulatory standards.

Key Skills and Experience:

• Bachelor degree in Mechanical Engineering with 3+ years in electro-mechanical systems.
• Technical proficiency in optimizing designs for mechanical and electro-mechanical systems.
• Solid understanding of metal and plastic manufacturing processes for product design.
• Proficiency in 3D CAD software (e.g., SolidWorks), including GD&T and kinematic calculations.

Attributes:

• Analytical and detail-oriented, with a collaborative and hands-on approach.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Manufacturing Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Mon – Fri, 8.00 am – 6.00 pm)
• Salary Package: Basic salary up to $4,300 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Help with New Production Introduction tasks: develop manufacturing processes, design tools, create schedules, control costs, support sourcing, qualify quality, support tests, reduce product costs, and introduce products into the supply chain.
• Lead technical aspects of manufacturing processes for cables, harnesses, mechanical assemblies, inspections, and testing, including designing tools and fixtures.
• Utilise knowledge of electrical/electronic equipment production and testing methods.
• Manage multiple priorities under tight deadlines to successfully complete and make projects profitable.
• Collect data and create manufacturing solutions and documents to support OMS, SOE, MI, drawings, and specifications.
• Perform assembly tasks and guide technicians/operators as needed.

APPLY NOW!!!

• Diploma or Degree in Electrical / Mechanical Engineering or a related professional certification.
• Proficient in Microsoft Excel to compare and study Bill of Materials (BOM).
• 2-5 years of relevant experience in related industry.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67156 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Production (Manufacturing)
• Position Title: Production Engineer / Executive
• Working Location: West Region
• Working Hours: Monday – Friday, 7.30 am – 5 pm
• Salary Package: Up to $4,000 + AWS + VB
• Duration: Permanent

Key Responsibilities

• Organize, monitor, and ensure manufacturing processes run efficiently with minimal costs using manpower, equipment, facilities, materials, and capital wisely.
• Start, implement, and manage process improvement programs based on best practices in the metal drum industry, focusing on productivity and product quality.
• Ensure all manufacturing processes comply with all regulatory and statutory requirements.
• Collaborate with the HR department to address employee grievances promptly.
• Conduct employee performance reviews to gauge the competency, knowledge, and contribution of maintenance technicians and engineering staff.
• Maintain work safety practices and continually enhance safety records by addressing physical safety issues and employee safety attitudes.
• Keep all areas clean and organized.
• Evaluate, train, and maintain individual skills to stay updated with the best engineering management practices.
• Ensure timely submission of overtime records to the HR department for monthly salary calculations.
• Establish and prepare process documentation, such as work instructions, process specifications, and assist with the quality plan.
• Prepare reports, analyse data, and make recommendations to improve plant operations and solve production issues.
• Ensure subordinates are trained, equipped, and motivated to accomplish the maintenance program safely, timely, and cost-effectively.
• Communicate regularly with all production and maintenance teams to ensure good two-way communication about production and maintenance issues.
• Assist in hiring production personnel.
• Maintain and update operating manuals for all manufacturing equipment and processes.
• Perform any other projects or tasks assigned by the HOD/Management.

APPLY NOW!!!

• Diploma or Degree in Manufacturing, Electrical, Mechanical, or Engineering discipline.
• Minimum 5 years of experience in a manufacturing environment.
• Ability to supervise and lead subordinates.
• Willingness to work after hours or on non-working days.
• Ability to work under pressure.
• Computer literate.
• Knowledge of ISO standards is a plus.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69178 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Be part of a dynamic lab & medical equipment firm
• Attractive benefits

RESPONSIBILITIES

• Present, promote and sell products/services to existing and prospective customers in the cleanroom, biotechnology and pharmaceutical production industries
• Develop and implement strategic sales plans for products offered and agencies assigned
• Engage with potential customers to understand their needs; identifies and suggests equipment, products, services or solutions that will meet those needs.
• Analyse the territory and market’s potential, track sales and status reports
• Develop strong technical know-how on products and applications to support and effectively engage prospects and clients
• Foster and enhance good relationship with all of our customers and grow product portfolio for the team

REQUIREMENTS

Incumbent should ideally be from a Sales Engineer background, experienced in sales related to cleanroom/industrial/pharmaceutical industries. Sales experience is in relations to capital equipment (CAPEX)/ Engineering/integration-related solutions, unlike benchtop devices.

• Minimum diploma in Engineering, Biotechnology or related disciplines
• Minimum 3 years of experience in technical sales environment within related industries (e.g.: healthcare/ cleanroom/ pharmaceutical/ industrial equipment)
• Has strong sales track records
• Experienced in tender and request for quotation (RFQ) preparation and costing
• Preferably with cleanroom or pharmaceutical equipment sales experience
• Good communication & presentation skills (well versed in English – both spoken and written)
• Good analytical and problem-solving skills
• Target driven and able to work independently
• Meticulous and organized personality
• A positive attitude is a mind set that helps you see and recognize opportunities, as well as a strong willingness to learn

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Production Engineer
• Working Location: Tuas (Transport provided)
• Working Hours: 5.5 days (Mon - Fri. 8.00 am - 5.00 pm; Sat, 8.00 am - 12.00 pm)
• Salary Package: Basic salary up to $5,000 + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Coordinate all aspects of assigned tasks to ensure efficient production flow.
• Provide monthly production input and identify areas for improvement.
• Offer technical leadership for new and existing challenges.
• Create and maintain process instructions and documentation.
• Develop, record, and present reports for monthly production meetings.
• Perform assembly tasks and guide technicians/operators as needed.

APPLY NOW!!!

• Diploma or Degree in Engineering or a related professional certification.
• Proficient in Microsoft Office.
• Able to work with minimal supervision.
• Effective team player with good communication and presentation skills.
• 2-5 years of relevant experience in related industry.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69139 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641