Total 151 purchasing engineer job vacancies in Manufacturing / Production category in D04 Harbourfront,Telok Blangah, Sentosa Island

What a Product Engineer does at HP:

• Coordinates and leads activities of internal and outsourced development and manufacturing partners to support manufacture of products.
• Performs engineering analysis of defective product units or sub- assemblies, along with root-cause analysis in case of production matters.
• Evaluates results of customer feedback and manufacturing, test, and quality assurance processes for products and communicates product and process issue analysis to product stakeholders.
• Require to set up high volume line audit and sampling test plan for NPI product.
• Collaborates with management, internal, and outsourced manufacturing and development partners to address issues, recommend and implement changes to product or process to reduce defects, improve quality, and lower costs.
• Represents product engineering team for all phases of larger and more- complex development and manufacturing projects.
• Solves difficult and complex problems with a fresh perspective, demonstrating good judgment in selecting creative solutions and managing projects independently.
• Develops recommendations on changes and design enhancements to manufacturing processes to improve reliability, safety, outputs.
• Leads moderate to high complexity projects, and supports the realization of operational and strategic plans.
• Delivers professionally written reports, and supports realization of operational and strategic plans.

Individuals who do well in this role at HP, usually possess:

• Four-year or Graduate Degree in Electrical Engineering, or any other related discipline or commensurate work experience or demonstrated competence.
• Typically has 0-1 years of work experience, preferably in electrical design and tools, software packages, architecture of electronic hardware, or a related field.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

OMS has built a long-standing commitment to the upstream energy industry as we manufacture and distribute products from facilities and business units around the world. We are an equal opportunity employer and process all employment applications following the relevant regulations in the countries we operate in.

We are now looking for a Product Design Engineer, with strong background in Mechanical Engineering to join the Engineering Team. The individual is responsible to prepare and generate detailed engineering work instructions and procedural specifications, provide technical support to sales function, guide and supervise junior product engineers for day to day work order preparation and perform other assigned duties as and when required. Work scope covers all OMS locations across the region.

Individuals with relevant product design experience in Conductor/Pipe Connectors, Wellhead Systems, Valves, Actuators, Choke, and/or Downhole Systems will be highly considered for this role.

Job Description

1. Design & Development for Special/New Product

2. Claim Handling -Investigate and response to customer claim

3. Conduct Functional & Life Testing

4. Involve in Production rationalization & SDG projects

5. Global Supplier Expansion – Evaluation and qualification of supplier, parts, process

6. Install & Commissioning of production facilities

7. Improvement Project Work:

• Study, propose, and implement projects.
• Rationalize processes and facilities for improve efficiency, quality, cost, and safety.
• Set up new processes or facilities.
• Design and build facilities.

Job Requirements

1. Technical Skills:

· Passion for mechanical automation technology.

· Strong technical inclination, including understanding system design and working principles.

· Hands-on approach – willing to engage in practical work, not just desk-based tasks.

· Minimum 2 years of experience in a related engineering field.

· Preferably possesses knowledge in CAD, PLC, Machine Vision, and Robotics.

2. Personality Traits:

· Committed and self-initiative, with a proactive approach to problem-solving.

· Creative problem solver, thinking innovatively to address challenges.

· Curious with a thirst for knowledge, willing to refer to manuals and undertake self-study.

· Logical thinker with a hands-on mentality, implementing improvements and troubleshooting effectively.

· Sense of responsibility and urgency in addressing issues independently.

3. Communication Skills:

· Cooperative and able to work effectively in a team.

· Proficient in technical report writing.

· Strong communication skills to convey ideas and solutions effectively.

· Able to communicate in Japanese will be an added advantage

Summary

Identify, develop and drive strategic engineering initiatives particularly in relation to Quality, Cost, Productivity improvement. Lead NPI and Product Transfer Projects to successful completion.

Key acountabilities

• Responsible for site Engineering activities, identify and propose opportunities including Out/In-sourcing ideas, EOL management, alternate sourcing and others
• Lead NPI and Product Transfer projects to successful completion
• Initiate value engineering projects to enhance operational capabilities to meet new business needs and raise operational efficiency
• Lead material localization projects for improvements in product cost, quality and operational excellence
• Work closely with cross functional teams to understand engineering related issues in order to provide effective solutions
• Drive yield improvement, reduce COPQ and drive shopfloor productivity through automation and process enhancement
• Improve site Safety through hazard identification and prevention

Requirements

• Bachelor’s Degree in Engineering / Science disciplines
• At least 8 - 10 years of relevant experience in manufacturing engineering in Analytical instruments industry
• Experience in NPI and product transfers is preferred
• Knowledge in manufacturing process of analytical instruments such as Inductively Coupled Plasma- Optical Emission Spectroscopy (ICP-OES), Inductively Coupled Plasma- Mass Spectrometry (ICP-MS), Gas Chromatography (GC), Atomic Absorption Spectroscopy (AAS)
• Good oral and written communications
• Strong analytical and interpersonal skills
• Project Management experience and leadership skills
• Strong drive for results, balanced with effective decision making and problem-solving skills
• Lean manufacturing and Six Sigma Methodology
• Knowledge in ISO 9001, ISO14001 and ISO45001

Job Responsibilities:

• Perform basic and advanced machine assembly works
• Develop mechanical testing jigs & fixtures and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine mechanical setting and inspection checks according to YS standard
• Able to troubleshoot and resolve machine any kind of mechanical non conformance
• Perform machine final mechanical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Diploma in Mechanical/Electrical Engineering
• Experience working in machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, Powerpoint and Outlook)
• Knowledge of drawing software(Solidworks, Unigraphic, etc)

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

Purpose: To create, control and manage changes to customer's Technical Product Data (TPD) packages (Items, Bill of Materials, Product specification documents) in the Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) systems. To deploy TPD changes to the relevant Persons-in-Charge (PICs) for execution.

Key Area of Responsibilities:

• Check the correctness and completeness of product packages, such as Technical Product Data (TPD) and Bill of Materials (BOM) received from customers.
• Work with the user of TPDs to define the new TPD requirement and update the ISO document (for new customers or any change in TPD requirement).
• Maintain required customer items, BOM, and TPDs in PLM and ERP systems.
• Create and control the item part number, BOM and TPD in the PLM and ERP systems.
• Create projects in the ERP system for the fulfillment of customer Sales orders.
• Implement Engineering Change Order (ECOs) and deploy the changes to the next inline PIC (such as planner, purchaser, process engineer and Sales & Program dept.)
• Check and ensure all required information for the TPD (items, BOMs, documents) and/or configuration change are provided, and approved by the customer.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Science or relevant field.
• Minimum 2 years of working as a product data engineer in the semiconductor industry or similar position.
• Proficient in Microsoft Excel functions
• Good communication skills

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting, plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement from AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layout and Piping General Arrangement from AVEVA
• Extraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and other discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting, plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement from AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layout and Piping General Arrangement from AVEVA
• Extraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and other discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

Responsibilities

Assist Senior Production Engineers in managing a production team that includes:

• Resources are used efficiently.
• Co-ordinating between other teams like Planning, Quality Control and other departments
• Ensure all the works to be carried out in a safe manner with proper methods, tools etc.
• Ensure production and safety SOP are being followed correctly.
• Meet customer’s requirements that include:
• Delivery Schedules
• Documentation
• Quality
• Safety

Requirements

1. Bachelor degree/Post Graduate Diploma in Civil & Structural Engineering from recognised University.

2. Ability to work independently.

3. Ability to adhere to schedule and keep proper records.

4. Strong teamwork spirit, proactive & good communication skills.

Responsibilities

Assist Senior Production Engineers in managing a production team that includes:

• Resources are used efficiently.
• Co-ordinating between other teams like Planning, Quality Control and other departments
• Ensure all the works to be carried out in a safe manner with proper methods, tools etc.
• Ensure production and safety SOP are being followed correctly.
• Meet customer’s requirements that include:
• Delivery Schedules
• Documentation
• Quality
• Safety

Requirements

1. Bachelor degree/Post Graduate Diploma in Civil & Structural Engineering from recognised University.

2. Ability to work independently.

3. Ability to adhere to schedule and keep proper records.

4. Strong teamwork spirit, proactive & good communication skills.

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting, plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement from AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layout and Piping General Arrangement from AVEVA
• Extraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and other discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

About The Role

Zero-Error Systems (ZES) is seeking a Product Engineer to join our team and help us revolutionize the industry. As a Product Engineer, you will join a team of specialised engineers to design, verify, test, and operationalise our System-on-Module (SoM) products by using high-performance Field Programmable Gate Arrays (FPGA) SoC devices.

Key Responsibilities

• Work closely with the product development team, and be involved in the FPGA product development lifecycle including system design, IP development, testing, application-use case, and production
• Contribute to the full design methodology (from front-end to back-end) based on FPGA, including the design of customized circuits/Intellectual Properties (IPs)/systems and the configuration/programming of macro-IPs (e.g, ARM cores, and communication interfaces) within FPGA cores
• Create and review the test programs to support and validate the FPGA product development
• Support the FPGA design upgrade
• Maintain and provide good documentation for the FPGA product development
• Any other duties assigned

Key Requirements

• Degree holder (Electrical/Electronics/Computer) with minimum 2 years of relevant working experience in FPGA hardware such as Xilinx or Altera
• Good knowledge of Verilog register-transfer-logic design and hardware functional verification concepts/test methodology is desirable.
• Hands-on experience in FPGA development tools such as AMD/Xilinx VivadoExperience in digital design and embedded software development using FPGA will have added advantage.
• Comfortable in Linux environment, and programming skills/experience in C/C++ are preferred.
• Good problem solving and failure analysis skills
• Good team player and results-oriented
• Excellent communication skills

Measures of Performance

• FPGA Platform - Setup/Installation/Maintenance of an FPGA platform to support the product development
• Hardware/Software Validation - Together with the team, qualify/quantity the performance/functional of the FPGA products, including Hardware/Software co-design
• Product Demonstration - Together with the team, demonstrate the application use-case for the FPGA products

For interested candidates, please forward your resume to ZES HR at [email protected]

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts using polymer reinforced fiber composite materials.

RESPONSIBILITIES:

-Operate equipment to perform 3D printing and relevant post-processes (e.g. cam-based systems), mechanical charaterisation such as tensile, bending, compression tests and inspection (e.g., CMM) as part of the industry project.

-Responsible for generating jig and fixturing 2D/3D drawings for documentation and archiving purposes.

-Manage and work with local machining house for jig and fixture fabrication and assembly.

-Carry out routine maintenance, diagnostics checks and engage equipment vendors for preventive maintenance.

-Perform function testing to verify equipment readiness after maintenance or material change.

-Plan equipment schedule, maintain and improve lab environment. Manage raw feedstock and maintain stock/inventory list.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

JOB REQUIREMENTS:

-NITEC or Diploma in engineering related qualifications.

-At least 5-year work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry. Candidates with > 5-year experience will be considered for a senior role.

-Capabilities in CAD and 2D drawings using NX/SolidWorks, with knowledge in GD&T will be beneficial.

-Traditional methods of inspections such as CMM/handheld measurement tools and preparation of FAI documents is preferred.

-Familiarity in handling CAM based systems such as robotic system/CNC is an added advantage.

-Methods of processing and post processing of plastic parts such as prototyping of plastic parts and knowledge in fixture design for machining is preferred.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willingness to learn and adapt to new technology promptly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts using polymer reinforced fiber composite materials.

RESPONSIBILITIES:

-Operate equipment to perform 3D printing and relevant post-processes (e.g. cam-based systems), mechanical charaterisation such as tensile, bending, compression tests and inspection (e.g., CMM) as part of the industry project.

-Responsible for generating jig and fixturing 2D/3D drawings for documentation and archiving purposes.

-Manage and work with local machining house for jig and fixture fabrication and assembly.

-Carry out routine maintenance, diagnostics checks and engage equipment vendors for preventive maintenance.

-Perform function testing to verify equipment readiness after maintenance or material change.

-Plan equipment schedule, maintain and improve lab environment. Manage raw feedstock and maintain stock/inventory list.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

JOB REQUIREMENTS:

-NITEC or Diploma in engineering related qualifications.

-At least 8-year work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry. Candidates with > 5-year experience will be considered for a senior role.

-Capabilities in CAD and 2D drawings using NX/SolidWorks, with knowledge in GD&T will be beneficial.

-Traditional methods of inspections such as CMM/handheld measurement tools and preparation of FAI documents is preferred.

-Familiarity in handling CAM based systems such as robotic system/CNC is an added advantage.

-Methods of processing and post processing of plastic parts such as prototyping of plastic parts and knowledge in fixture design for machining is preferred.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willingness to learn and adapt to new technology promptly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Overview

We are seeking an experienced Plant Engineer to join our central kitchen manufacturing plant. With a highly energetic technical team, the Plant Engineer is a pivotal role in the central kitchen who will be responsible for overseeing the highly automated packaging operations, serviceability of all production equipment and constantly improving the automation systems within the plant. The successful candidate will have a strong foundation in engineering and experience in managing and maintaining a high-volume food manufacturing plant.

Responsibilities

· Conceptualize systems and equipment to build capabilities for mass production of a wide range of ready meals.

· Constantly improve current automated production system through mechanical, electronic, automation, digital control enhancements and configuration.

· Daily setup and run the production system to meet with time-sensitive order demand

· Maintain highest level of hygiene standard in the plant

· Develop and implement preventative maintenance programs

· Ensure compliance with all safety regulations and policies

· Collaborate closely with other central kitchen teams to ensure smooth end-to-end operation

· Prepare documentation, conduct training and submit reports

Requirements:

· Diploma/degree in Automation, Mechatronics, Electrical or Industrial Engineering or related field

· Min 3 years of hands-on experience in large scale food production environment

· Extensive knowledge of food manufacturing processes and equipment

· Ability to lead a team and run a production process independently with a tight schedule

· Strong capabilities in design, implementation and troubleshooting of automation systems

· Has own transport

Job Description & Key Responsibilities:

We are seeking a talented Product Engineer to join our innovative solar technology team, focusing on the development and optimization of perovskite thin-film solar modules. This role combines materials science expertise with manufacturing process optimization to advance our next-generation solar technology.

* Lead the development and optimization of perovskite solar module manufacturing processes

* Design and execute experiments to improve module efficiency, stability, and scalability

* Analyze production data and implement process improvements to enhance yield and performance

* Collaborate with R&D teams to transition new technologies from lab to manufacturing scale

* Develop and maintain product specifications and process documentation

* Troubleshoot technical issues in the manufacturing process and implement solutions

* Work with suppliers to qualify materials and establish quality control protocols

* Ensure compliance with safety protocols and environmental regulations

Qualifications Requirements

* Bachelor's degree or Master in Materials Science, Chemical Engineering, or related field

* 3+ years of experience in thin-film solar technology or semiconductor manufacturing

* Strong understanding of perovskite materials and solar cell physics

* Proficiency in characterization techniques (XRD, SEM, UV-Vis spectroscopy)

* Knowledge of statistical process control and Design of Experiments (DOE)

* Experience with scaling up laboratory processes to production

Preferred Qualifications Requirements

* Direct experience with perovskite solar cell fabrication and characterization

* Knowledge of international solar industry standards (IEC, ASTM)

* Experience with automated manufacturing systems and process control

* Background in failure analysis and reliability testing

* Programming skills for data analysis (Python, R, or similar)

* Experience with clean room operations

* Project management experience

Technical Skills Requirements

* Excellent technical skills on Thin-film deposition techniques, materials characterization, process optimization and quality control

* Able to handle data analysis and statistical methods

* Familiar with Clean room protocols and safety and environmental procedures

Personal Qualities and Communication Requirements

* Strong analytical and problem-solving abilities

* Excellent communication skills

* Detail-oriented with strong documentation habits

* Ability to work effectively in cross-functional teams

* Innovation mindset with practical implementation skills

* Results-driven with a focus on continuous improvement

What We Offer

* Opportunity to work on cutting-edge solar technology

* Competitive salary and benefits package

* Professional development opportunities

* State-of-the-art research and manufacturing facilities

* Collaborative work environment

* Potential for patent development and publication

Job Type

* Full time, up to 20% overseas travelling for supplier and customer site visits

Position Overview:
We are seeking an experienced and detail-oriented Optical Manufacturing Engineer to join our team. This role involves designing, developing, and optimizing manufacturing processes for optical components and systems. The ideal candidate will have 3 years background in optical engineering, manufacturing techniques, and quality control processes, ensuring the production of high-precision optical products. Fresh graduates with mechanical engineering .are encourage to apply too, we will provide training.

Key Responsibilities:

1. Process Development and Optimization:
   • Design and implement manufacturing processes for optical components, including lenses, mirrors, prisms, and coatings.
   • Optimize fabrication methods such as grinding, polishing, coating, and assembly to improve efficiency and precision.
2. Production Support:
   • Collaborate with production teams to troubleshoot and resolve manufacturing issues.
   • Ensure that all production processes meet quality and performance specifications.
3. Equipment and Technology Management:
   • Specify, procure, and maintain manufacturing equipment for optical production.
   • Develop and implement advanced technologies, such as automated systems and CNC machines, to enhance production capabilities.
4. Quality Assurance:
   • Develop and maintain quality control procedures to ensure compliance with industry standards (e.g., ISO 9001, MIL-PRF-13830).
   • Perform inspections, measurements, and testing of optical components using interferometers, profilometers, and other metrology tools.
5. Design Collaboration:
   • Work closely with optical designers to ensure manufacturability of new products.
   • Provide feedback on design adjustments for optimal production results.
6. Documentation and Reporting:
   • Prepare and maintain detailed process documentation, work instructions, and technical reports.
   • Analyze production data and report on key performance indicators (KPIs).
7. Continuous Improvement:
   • Lead initiatives to enhance product yield, reduce costs, and improve cycle times.
   • Stay updated on the latest trends and advancements in optical manufacturing and incorporate them into the production process.
8. Documentation:
   • responsible to create, review and maintain customer’s and Company’s technical drawings as well as Part Number Creation/Maintenance. Very similar to product engineering tasks and roles, but listed as Quality Assurance to control the Company’s standard
9. Performs other miscellaneous duties as assigned.

About The Role

Zero-Error Systems (ZES) is seeking a Product Engineer to join our team and help us revolutionize the industry. As a Product Engineer, you will join a team of specialised engineers to design, verify, test, and operationalise our System-on-Module (SoM) products by using high-performance Field Programmable Gate Arrays (FPGA) SoC devices.

Key Responsibilities

• Work closely with the product development team, and be involved in the FPGA product development lifecycle including system design, IP development, testing, application-use case, and production
• Contribute to the full design methodology (from front-end to back-end) based on FPGA, including the design of customized circuits/Intellectual Properties (IPs)/systems and the configuration/programming of macro-IPs (e.g, ARM cores, and communication interfaces) within FPGA cores
• Create and review the test programs to support and validate the FPGA product development
• Support the FPGA design upgrade
• Maintain and provide good documentation for the FPGA product development
• Any other duties assigned

Key Requirements

• Degree holder (Electrical/Electronics/Computer) with minimum 2 years of relevant working experience in FPGA hardware such as Xilinx or Altera
• Good knowledge of Verilog register-transfer-logic design and hardware functional verification concepts/test methodology is desirable.
• Hands-on experience in FPGA development tools such as AMD/Xilinx VivadoExperience in digital design and embedded software development using FPGA will have added advantage.
• Comfortable in Linux environment, and programming skills/experience in C/C++ are preferred.
• Good problem solving and failure analysis skills
• Good team player and results-oriented
• Excellent communication skills

Measures of Performance

• FPGA Platform - Setup/Installation/Maintenance of an FPGA platform to support the product development
• Hardware/Software Validation - Together with the team, qualify/quantity the performance/functional of the FPGA products, including Hardware/Software co-design
• Product Demonstration - Together with the team, demonstrate the application use-case for the FPGA products

For interested candidates, please forward your resume to ZES HR at [email protected]

RESPONSIBILITIES & DUTIES

• Assist the Production Manager in the scheduling of all incoming jobs and ensure close monitoring and timely delivery.
• Assist the Production Manager in taking charge of all coating (HVOF and Armoloy) jobs and ensure delegation and coordination on the necessary works.
• Understand the full requirements of all manufacturing, servicing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Ensure all budgets and plans are met.
• Assist the Production Manager to monitor and manage workshop loadings, direct labour hours, overtime, rework, scrap, on time deliveries, downtime, work efficiencies and ensure all measurements are within plans.
• Attend weekly production meeting to provide status update to all relevant departments and iron out related production issues.
• Assist the Production Manager to work closely with all Production Supervisors to formulate shop floor production plans and optimize production hours and weekly planned hours ensuring on time delivery.
• Identify the skill level of each reporting employees and distribute suitable work tasks to achieve higher throughput.
• Manage and resolve grievances and conflicts arising. Motivate employees to boost their morale.
• Work with Production Manager, Engineering Manager, General Manager and HR department to develop, implement and conduct training to enhance the competency or upgrading of skills for production employees.
• Conduct annual performance appraisal for all reporting employees.
• Work closely with the QHSE Manager/ MR to resolve quality issues.
• Perform review on PCR and work closely with the sales, engineering and quality department or customer to clarify all technical specifications and job requirements.
• Assist the Production Manager in resolving bottleneck situations and determining root cause, corrections and corrective actions for internal rejection and scrap.
• Assist the Production Manager in initiating purchase requisition for any requirements.
• Assist the Production Manager in preparing monthly reports whenever required.
• Work closely with all departments to resolve any arising issues.
• Assist the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Perform other assignment and duties as and when required.

Accountability

• Control, lead, develop and motivate all reports.
• Monitor and ensure on time delivery of finished product.
• Minimize rework and rejection rate.
• Work with the team to achieve QHSE objectives.
• Maintain good housekeeping at all times.
• Report all unsafe acts, infrastructure and environment to his Manager.

QUALIFICATION & EXPERIENCE

· Degree preferably in Manufacturing/ Mechanical Engineering discipline or equivalent.

· Preferably 2 years of relevant experience in the metal machining or oil and gas industries.

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

Primary Function:

• Lead Food Safety risk assessment and quality records (QRs) for escalation on lines as per Global GMP lifecycle policy.
• Provides support and inputs to update Food Safety Policy and site HACCP.
• Provide support to the Manufacturing organization to facilitate the efficient operations within the production area.
• To optimize existing processes and to ensure that production goals are met. Ensures systems and processes to maintain GMP at workplace.
• Collaborate with Operations sub-functions in tracking critical production and cleaning parameters to track and collate responses for consumers/medical/affiliates escalations.
• Monitors performance of equipment, machines and tools and corrects equipment problems or process parameters that can produce non-conforming products.

Major Responsibilities:

• Responsible to Manage and focus directly on GMP food safety engineering/food security and validation, in preparation for the commercial production of regulated products.
• Support execution of projects related to food safety and optimization of existing manufacturing processes to deliver products with the production requirements consistent with Gold Standard Policies.
• Responsible for leak management and sanitation response during food safety events, including oversight for sanitation and verification activities.
• Ensures effectiveness of routine sanitation and cleaning activities.
• Train shopfloor technicians on food safety requirements
• Responsible to perform quality events investigation and coming up with CAPA action. Ensuring the effectiveness of CAPA action.
• Interface with other departments and suppliers to address root causes.
• Responsible to motivate and train employees for the facility and from third party as part of food safety program.
• Partner with Engineering on the installation, modification, upgrade and maintenance of manufacturing equipment. Co-Development of qualification and validation protocols.
• Execution of qualification and validation activities
• Lead incident reviews to investigate and correct microbiological non-conformities and provide recommendation regarding process design, product disposition and continuous improvement.
• Optimize the documentation for quality systems, cleaning and validation, SOPs, HACCP plans, and food safety policy and protocols.
• Ensures plant Food Safety documentation is maintained in an audit-ready state, meeting all statutory, regulatory requirements & customer expectations.
• Ensures the effective use of materials, equipment, and personnel in producing quality products at an effective operating cost.
• Responsible for compliance with applicable Corporate and Divisional Policies and Procedures.
• Prepares reports, publishes, and makes presentations to communicate findings.
• Implement, document, and maintain controlled, repeatable production processes.
• Understands the business needs of the company and has knowledge of the customer needs of our business.
• Cultivates internal and external network of resources to complete tasks.
• Any other duties as assigned by supervisor.

Requirements:

• Diploma/Bachelor’s degree in Process Engineering/ Mechanical/ Electrical/ Food Science/Biotechnology/Microbiology
• Minimum 3-5 years of related experience in quality/manufacturing/production, preferably in a GMP environment in food/pharma industry
• Able and willing to work on shift pattern (12 hours rotation shift)
• Preferably with knowledge in SAP system/POMS/MES.
• Preferably with knowledge about food microbiology, pathogens and food safety.
• Able to make fast decision and react efficiently to situation.
• Understands engineering principles, theories concepts, practices and techniques

*Kindly note this position is based in Tuas.

*This position will be working on shift pattern.

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

Job Description :

• Able to read and understand shop drawing.
• To conduct quality check, pre-pour & post pour.
• Liaise with all the relevant parties for production at factory.
• Production planning according to site needs.

Requirements :

• Precast experience would be added advantages.
• Able to communicate in English.
• Minimum Diploma in Civil /Structural /Materials.

Job Description:

• Support set up of machinery to ensure on-time for mass production.
• Responsible for leading machine conversions and cleaning equipment.
• Assist in immediate breakdown restoration of machine function to achieve production output.
• Perform troubleshooting and diagnostic-based troubleshooting guide.
• Conduct on-the-job training for new production operators and technicians
• Statistical process monitoring and control lead to productivity improvements.
• Support continuous improvement initiatives toward production efficiency and quality.
• Design and fabricate simple jigs/fixtures to improve production processes.
• Carry out periodical maintenance for process machinery on schedule.
• Review process issues, and internal corrective action requests, assist in a customer complaint investigation, and conduct failure analysis.
• Assist new production introduction trial run.
• Ensure customer orders are fulfilled on time in full.
• Perform reconciliation and maintain an accurate inventory of materials and finished goods.
• Consistently adhere to good housekeeping practices and safety regulations.
• Responsible for completing and countersigning GMP documentation for traceability and submitting it to Management at the end of each processed order.
• Ensure workplace safety.
• Workplace housekeeping and cleanliness.
• Any other duties and responsibilities as assigned by the management.

Job Requirements:

• Preferably at least a Diploma / Higher NITEC / NITEC in Mechatronics / Electromechanical / Mechanical / Manufacturing / Electrical Engineering.
• Able to read basic engineering drawings.
• Fluent in both oral and written English.
• Knowledge of GMP will be an added advantage.
• Good communication and interpersonal skills.
• Able to support overtime and shift.
• Systematic and able to work under pressure.
• Able to work independently.