Total 1,699 structural engineer job vacancies in Manufacturing / Production category in Singapore

• Ensure machines are prepared, set up, and qualified before crating for shipment from the factory to customers.
• Provide occasional on-site service within Singapore and internationally as needed.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Configure semiconductor backend equipment.
• Align equipment/modules and perform vision alignment and calibration.
• Conduct machine checkout procedures.
• Provide technical support on-site, both domestically and internationally.

Requirements:

• Nitec in Engineering or equivalent.
• At least 1 year of relevant working experience
• Proficient in machinery automation, including electrical, servo, sensor, and pneumatic systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Ensure machines are prepared, set up, and qualified before crating for shipment from the factory to customers.
• Provide occasional on-site service within Singapore and internationally as needed.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Installation and maintenance of semiconductor equipment.
• Record engineering enhancements for future documentation.
• Develop procedures for the assembly, inspection, and testing of equipment.

Requirements:

• Diploma in Mechanical/Mechatronics Engineering or equivalent.
• At least 2 years of experience in setting up automation equipment.
• Knowledge of Electro Mechatronic System
• Willing to travel internationally for field support as needed.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Configure semiconductor backend equipment.
• Align equipment/modules and perform vision alignment and calibration.
• Conduct machine checkout procedures.
• Provide technical support on-site, both domestically and internationally.

Requirements:

• Nitec in Engineering or equivalent.
• At least 1 year of relevant working experience
• Proficient in machinery automation, including electrical, servo, sensor, and pneumatic systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

What a Manufacturing Engineer does in HP:

• Lead and own key manufacturing process in Graphics Printhead technology.
• Drives process characterization and improvements in collaboration with internal/external partners.
• Innovate on new forms of manufacturing technology (Smart Manufacturing) in line with Industrial 4.0 for cost savings and efficiency gains.
• Collaborate with partners on process changes and convergence.
• Drive improvement plans on sustainable performance on quality, yield and throughput.

Individuals who will do well in this roel usually possess:

• Bachelor's degree in engineering or equivalent or at least 4 years of relevant manufacturing experience.
• Possess good understanding of manufacturing process, methodologies and environment.
• Excellent analytical, problem solving and project management skills.
• Good understanding of quality assurance and process control knowledge.
• Excellent team player, interpersonal and effective communication skills across functions and geographies.
• Good visualization skills to create real-time dashboards and/or reports to inform trends and insights.
• A willingness to learn and the ability to communicate ideas clearly in a team.
• Experience with Power BI would be an advantage.
• Proactive, Innovative, Independent and Self Motivating.
• Able to work under pressure to deliver business objectives.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

Job Summary:

The scope of this role is to support the Balloon Catheter line or Extrusion, Braid and Shaft Coil line in Singapore. Develop, improve manufacturing processes by studying product and manufacturing methods in all areas of the Quasar Singapore.

Essential Duties and Responsibilities:

Include the following. Other duties may be assigned.

• Evaluates manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators.
• Design and develop manufacturing processes for new products, product changes and enhancements, as well as related tooling and fixtures.
• Process troubleshooting, refinements to improve product throughput, design of fixtures and assembly techniques.
• Improves manufacturing efficiency by analysing and planning work flow, space requirements, and equipment layout.
• Process qualifications and validations including equipment qualifications and material specifications.
• Assures product and process quality by designing testing methods; testing finished product and process capabilities; establishing standards; confirming manufacturing processes.
• Provides manufacturing decision-making information by calculating production, labour, and material costs; reviewing production schedules; estimating future requirements.
• Prepares product and process reports by collecting, analysing, and summarizing information and trends.
• Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special service.
• Responsible for Health & Safety within assigned areas to include accident investigation and corrective action.
• Investigate state-of-the-art process technologies and evaluate potential competitive advantage and the cost benefit of introduction.
• Oversee and drive Validation Activities.
• Maintain and comply with ISO13485, GMP and FDA regulations.

Education/Experience and Qualifications:

• Availability to travel to sending site for duration of onsite training
• Bachelor in Engineering or similar technical field with 5 to 8 years’ experience in a high-volume production environment. Medical Device Manufacturing experience with knowledge of catheter production techniques is preferred
• Strong interpersonal skills with the ability to communicate effectively at all levels within the company.
• Proficient in DOE and statistical techniques.
• Knowledgeable in defining process capabilities and control charting.
• Writing of protocols for validations and qualifications including FMEA, MVP, IQ/OQ & TMV protocol preparation.
• Knowledge of GMPs, ISO 9001, ISO13485 and the Medical Device Directives
• Self-motivated and driver of change and innovation.
• Must be willing to work in a fast-paced environment with minimum supervision.

Key Responsibilities:

• Participate in end-to-end projects for system implementation of MLS system
• Engage and collaborate with Architects, Security and Development Lead to ensure solution design complies with enterprise design principles, security and control standards
• Liaise with application teams across group and countries build the enhancements according to the technical solution plan
• Analyse user requirements and convert requirements to design document and other system documentation to capture key design decisions
• Plan technical deliverables, perform design and development works to meet project’s requirements within schedule
• Perform data mapping and process mapping with interfacing applications
• Escalate issues that impacts project schedule on timely basis and propose workarounds/resolutions
• Create technical documents for the solutions. Compile timely, comprehensive, and accurate documentation as requested
• Test, maintain and recommend software improvements to ensure strong functionality and optimization
• Work with production support team members to conduct root cause analysis of issues, review new and existing code and/or perform unit testing
• Partner with Test Management teams to ensure completion of SIT, UAT, performance / load testing and application security testing with quality result
• Liaise with other application teams and business users to prepare test cases and test data prior to testing in UAT and Mock Run environment
• Manage project change request approval windows and deployment schedule
• Facilitate and provide technical and testing support before and after production deployment
• Liaise with other units across IT and Business in the organization
• Manage external vendors for project delivery within schedule

Key Requirements Must Have

• At least 8 years of experience / knowledge in Application architecture and System Integration with combination of technologies such as Unix, Linux, Hadoop, Apache, Jboss. Maria database and NoSQL Page 2 of 2 ## RESTRICTED ##
• At least 8 years of CICD implementation experience from scratch with combination of technologies such GitHub, Gitlab, Bitbucket, Jenkins, Aldon, etc
• At least 8 years of network and security experience to resolve firewall connection issue, integration issue, implementing load balancing and disaster recovery needs
• At least 10 years of experience in developing Unix Shell Scripting, SQL, Java and Python from scratch
• At least 10 years of experience in application and database design and UI/UX design
• At least 8 years of experience in business analysis, data mapping and process mapping
• At least 8 years of experience in Production Support Management, Incident and Problem Management
• Knowledge in networking, firewall, data migration, password encryption, SSO integration, and disaster recovery planning and testing
• Ability to multitask effectively and handle large amounts of data
• Highly driven, pro-active and a strong team player
• Excellent interpersonal skills and written and verbal communication skills in English

Salary: $2400-$2800+OT

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Setup and troubleshooting of semiconductor equipment and record engineering improvements for future reference
• Build procedures for assembly, inspection and testing of equipment

Requirements:

• Diploma in Mechanical/Mechatronics Engineering
• At least 2 years of experience in setting up automation equipment
• Knowledge of Electro Mechatronic System

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

As a Product Engineer at Micron Technology, Inc., you will be responsible in developing, validating, characterizing, and qualifying new state-of-the-art NAND Flash memory products. In this role, you will be involved in pre-silicon conceptual design and preparation work, run simulations, create and maintain design and validation documentation, analyze bench and parametric data as well as to debug & resolve yield, quality and reliability failures due to design related issues. You will also refine and develop best known methods and automation for design validation of current and future products.

You will also be responsible to work with NAND R&D, Designers and other various Engineering functional groups to troubleshoot, develop and validate new designs to meet specific product requirements. Product Engineers are the key product-specific point of contact for critical issues and act as the main interface between Research and Development, Manufacturing, Business Units, and Quality Assurance departments.

Responsibilities:

• Responsible for new product startup to deliver product specifications and requirements
• Define and validate product configuration parameters
• Create validation flow for silicon design margin characterization and validation in volume.
• Support design verification and in-depth circuit of new products using CAD tools and Verilog simulations
• Identify design marginalities and recommend design fix for circuit-related problems
• Perform electrical failure analysis to understand the root cause of device marginalities or failures
• Utilize engineering bench and testers to perform device characterization and electrical failure analysis

Qualifications/requirements:

• At least bachelor degree from Electrical/Electronic Engineering
• Possess problem solving and analytical skills
• Good multitasking and organizational skills
• Strong presentation and communication skills, self-motivation and enthusiasm

Salary: $2400-$2800+OT

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

• Configure semiconductor backend equipment.
• Align equipment/modules and perform vision alignment and calibration.
• Conduct machine checkout procedures.
• Provide technical support on-site, both domestically and internationally.

Requirements:

• Nitec in Engineering or equivalent.
• At least 1 year of relevant working experience
• Proficient in machinery automation, including electrical, servo, sensor, and pneumatic systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

NPI(New Product Innovation) / Manufacturing Engineer

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $2,500 - $3200
Location: Woodlands

Job Responsibilities

• Develop and implement advanced manufacturing processes utilizing digital technologies and data analytics to optimize productivity and reduce costs.
• Conduct comprehensive process analysis leveraging data-driven insights to identify areas for improvement and enhance quality, throughput, and yield.
• Collaborate with cross-functional teams (R&D, Operations, Quality) to support the integration of digital technologies into new product introductions and existing manufacturing processes.
• Evaluate and select appropriate digital manufacturing tools and technologies to improve process capabilities and efficiency.
• Lead or participate in root cause analysis and corrective action implementation for process-related issues using digital modeling and simulation techniques.
• Design and execute experiments (DOE) using digital twin technology to validate process changes and improvements before implementation.
• Create and maintain digital manufacturing documentation including virtual work instructions, digital SOPs, and real-time process monitoring dashboards.
• Provide technical support to production teams for the adoption and utilization of digital tools and technologies, ensuring adherence to quality standards.
• Drive initiatives related to Industry 4.0 principles, leveraging IoT and smart manufacturing concepts for continuous improvement.
• Stay current with industry trends and advancements in digital manufacturing technologies, recommending innovative solutions to enhance operational efficiency.

Job Requirement:

• Bachelor’s degree in mechanical engineering, Industrial Engineering, Manufacturing Engineering, or a related field.
• Experience with process improvement methodologies (Lean Manufacturing, Six Sigma) incorporating digital techniques.
• Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and familiarity with ERP/MES systems.

WhatsApp: +65 9837 8400

Lim Jun Yao

Reg No.: R1989028

The Supreme HR Advisory Pte Ltd

EA No.: 14C7279

The role requires the incumbent to communicate and coordinate closely with engineers and managers to manage machine programs, network, and software.

The individual will also be responsible for managing factory software and hardware assets, ensuring smooth operations and implementing innovative systems.

Duties and Responsibilities:

• Communicate and coordinate closely with Japan engineers and managers regarding machine programs, networks, and software.
• Coordinate with internal ISD and external vendors for machine networking and software updates.
• Manage the factory software and hardware assets inventory, providing regular updates to management.
• Work closely with ISD, SGTC, and the Smart Factory Team to implement innovative systems that support productivity and quality.
• Control factory IT networking, machine programs, and server data maintenance to ensure continuous smooth operations.
• Implement IoT solutions for factory processes lacking network connections.

Job Requirements:

• Qualifications: Degree in Electrical/Electronic or Computer Science Engineering.
• Experience: Minimum 5 years of experience in factory IT networking and machine programming.
• Other Requirements:Able to manage factory machine programs, networking, and IT system updates.
  Proficient in project management, machinery software control, and server data control.
  Skilled in programming languages including Python, R, and SQL.
  Work independently and self-driven, with strong analytical and problem-solving abilities.
  Possess good interpersonal skills for effective communication and collaboration with internal and external stakeholders.
  Flexible and adaptable, able to work under pressure with tight delivery schedules.
  Able to travel overseas for project assignments.
  

Apply for Position

• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Setup and troubleshooting of semiconductor equipment and record engineering improvements for future reference
• Build procedures for assembly, inspection and testing of equipment

Requirements:

• Diploma in Mechanical/Mechatronics Engineering
• At least 2 years of experience in setting up automation equipment
• Knowledge of Electro Mechatronic System

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Permanent position, Salary up to $3,300 + Fixed Allowances of $1,100
• Location: Jurong Island (Company Transport Provided at Designated Points)
• Shift Job: 12 Hours, Rotating AM and PM Shifts

Responsibilities:

• Lead and Oversee: Guide a team of Production Technicians to ensure the safe and efficient running of production processes.
• Support Process Engineering: Assist the Process Engineer in conducting activities and projects to optimize operations and achieve cost efficiency.
• Troubleshoot and Resolve Issues: Address plant, equipment, and quality issues promptly and recommend effective countermeasures.
• Maintain Equipment Integrity: Monitor plant equipment to ensure reliability and integrity.
• Optimize Operations: Support shift operations by providing optimal operating conditions for stable plant performance and high product quality.
• Train and Develop: Mentor and develop team members to enhance their skills and performance.

Requirements:

• Educational Background: Degree in Chemical Engineering or equivalent.
• Technical Skills: Knowledge of process control, troubleshooting, plant equipment, and instrumentation.
• Key Attributes: Strong analytical and technical report writing skills, leadership qualities, initiative, drive, commitment, ability to handle pressure, and excellent communication skills.

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1875181

Triton AI Pte Ltd

License no. 21C0661

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Working Hours: Mon-Fri: 8am - 515pm

Responsibility:

1. Involve in validation documentation for new machine/product/process/material

2. Initiate product reviews. Verifies and test products. Responsible for validation, trial run for new projects and customers.

3. Responsible for change control process and procedure development and implementation.

4. Responsible for new job development.

5. Provide technical support to customers.

6. Provide QA support to project development

7. Involved in new machine installation and process improvements.

8. Other related duties as assigned by the managing director/ QA manager

9. Qualification –Diploma/Degree, minimum 3 years working experience in manufacturing environment

10. Exposure in Quality Assurance/Control/Computer software/Electrical advantage.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

Alternatively, you may send your application and resume in MS Words format to [email protected] or Whatsapp to 8767 9648

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

K N Tan
Registration Number: R1768143
EA Licence No: 17C8778 (JIH SUN EMPLOYMENT AGENCY)

R:392FRHF2P4

• Configure semiconductor backend equipment.
• Align equipment/modules and perform vision alignment and calibration.
• Conduct machine checkout procedures.
• Provide technical support on-site, both domestically and internationally.

Requirements:

• Nitec in Engineering or equivalent.
• At least 1 year of relevant working experience
• Proficient in machinery automation, including electrical, servo, sensor, and pneumatic systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Job Purpose

Provide strong technical expertise and leadership in Process Development of project transfer and start-up. Responsible for the overall development of the Extraction process. Work closely with team to ensure successful implementation of project. Lead and/or support the team for new product transfer I development, equipment design, processes optimization and qualifications efforts. To ensure compliance to ISO/FDA, cGMPs, HSE regulatory requirements.

Accountabilities

• To lead the Extraction process development aspects of project implementation to deliver results within projected timeline, excellent execution and documentation.

• To lead user requirement specification (URS) development for processes equipment and liaise with vendors on technical discussion.

• To lead design reviews for processes equipment and work with global/ R&D team to develop and transfer the technology to site.

• To develop and execute equipment and processes validation approach / plan.

• To lead and execute new equipment and processes installation, optimization, commissioning, qualification and validation.

• To proactively communicate project progress, key issues and any other critical topics in a timely manner to the appropriate management level and vendors.

• To ensure compliance to cGMPs, IS013485 / FDA, HSE, and policy requirements.

Requirements

• Education: Minimum Diploma in Engineering (Mechanical, Electrical, Automation)or relevant discipline or equivalent.
• Experience: 8-15 years working experience in contact lens or optical device manufacturing or similar environment.
• Good understanding of processes automation system, vision inspection system, robotics and GMP/GDP requirement.
• Good analytical and troubleshooting skill with systemic approach.
• Good leadership and management skills.