Total 9 job vacancies by Singapore Lng Corporation Pte. Ltd.

General Overview

This position is part of the site Mechanical team that provides technical/maintenance support to the Operation and Project teams in LNG Terminal. He/she would be mainly responsible for overseeing the safe and reliable operations and maintenance of the Terminal assets from the Mechanical discipline perspective.

The incumbent shall oversee the maintenance of static and rotating equipment at the LNG Terminal. These include high pressure pumps, compressors, vessels, piping, valves, mechanical loading arms and structural elements; support the development and the upkeep of maintenance programme with advice from the Mechanical Engineer and to ensure that service records and logs are properly updated and maintenance activities are safe and efficient with minimal disruption to production.

Roles and ResponsibilIties

The incumbent shall be responsible for tasks and duties such as but not limited to the following:

• Oversee all mechanical maintenance work at the Terminal to ensure compliance with facility standards and procedures and alignment to legislative guidelines.
• Lead the maintenance, troubleshooting, repair, commissioning and replacement of mechanical equipment and piping systems such as BOG compressors , cryogenic pumps , Marine Loading Arms, storage tanks and pressure vessels
• Supervise the in-house contractor and equipment vendor to execute mechanical work/improvements within the terminal to ensure safe work execution and not affecting terminal gas supply reliability
• Develop and update maintenance plan and schedule for relevant facilities and procedures with inputs from other teams to minimise production disruptions and redundant work.
• Perform the review and analysis of operating equipment and facilities to identify anomalies, propose improvement and mediations to extend equipment lifespan and reduce maintenance cost.
• Review maintenance plans for compliance with Company's engineering standards and practices to ensure such standards and practices are aligned to legislative guidelines and industrial standards.
• Prepare PM Checklists, MSRAs as required.
• Responsible for the achievement of Maintenance KPIs, information sharing and coaching of technicians including their training plan and technical advice.
• Responsible for manpower planning and management including overtime planning, system entry and emergency activations.
• Support Spare Parts and Warehouse activities such as stock count, critical spare review, spare order review/purchase /replenish and SPIR list.
• Provide scope of work, PR and evaluation for maintenance service contract/technical work outsourcing.
• Budget forecasting, monitoring and management of approved budget.
• Participate in emergency response procedures and be assigned to any specific roles and responsibilities for such purpose.

Work Experience

• Minimum 8 years' experience in mechanical and maintenance function, preferably in oil/petrochemical or related industries
• Conversant with local codes, regulations and standards, equipment inspection and schedule requirements. Certified in API, vibration and other analysis standards will be well regarded
• Minimum 3 years' supervisory experience in an oil and gas installation is critical to success.
• Practical experience in repair and maintenance of sophisticated static and rotating equipment, reciprocating compressors and engines, piping and valves is essential.
• In addition, the successful candidate should possess the following personal attributes:

1. A team player who can work well in a team and willing to collaborate with other business groups to achieve results.
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments.
3. Diplomatic, pro-active and have excellent organizational and motivational skills to deliver world class maintenance performance.
4. Outstanding ‘can-do’ attitude with high capacity in problem solving.

Education

1. Diploma or Degree in Mechanical Engineering.

General Overview

The position is part of the Instrument Control and Electrical(ICE) team who is responsible for overseeing the safe and effective site execution of all electrical maintenance services and activities at the LNG Terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for tasks and duties such as but not limited to the following:

• Ensuring compliance with SLNG safety procedures, local and international electrical codes and standards
• Supervising and lead a team of electrical technicians and contractors with installation, maintenance and repair of electrical systems and equipment
• Developing, conducting and ensuring that E&I team members complete the relevant structured on the job training program
• Conducting site work inspection and quality control checks on all electrical works
• Reviewing and approving all electrical isolation permits and excavation permits and other permist that is of electrical and instrument nature.
• Leading the investigation for electrical maintenance abnormality incidents in order to identify root causes of problem as well as recommending and implementing solutions
• Working with SLNG electrical engineers to develop and implement maintenance program for electrical equipment to ensure reliability/resolve any maintenance problems
• Conducting morning tool box meeting with a focus on safety and smooth execution of maintenance activities
• Participating in emergency response procedures and be assigned to any specific roles and responsibilities for such purpose.

Work Experience

• Minimum 8 years (or 15 years for diploma) of experience in an oil and gas/petrochemical E&I maintenance supervisory role
• Expert knowledge and proficiency in low and medium voltage electrical system, power transmission, network communication equipment, Motors, CCTV, security system, Earthing, lightning protection and PLC system is mandatory. Knowledge in DCS an added advantage to excel in the role
• In addition, the successful candidate should possess the following personal attributes:

1. A team player
2. Self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments.
3. Possess leadership quality with the ability to inspire and motivate team members to achieve their full potential, driving success and positive outcomes

Education

• Engineering Degree/Diploma preferably in Electrical/Electronic/Instrumentation/Chemical Engineering discipline.

General Overview

This position is part of the Production team performing LNG Terminal operations of loading and unloading of LNG from vessels and re-gasification process of LNG for the natural gas pipeline network supply. The position requires the incumbent to perform fieldwork and operate the DCS. The incumbent will work closely with the marine, technical and maintenance team to perform the operations.

Roles and ResponsibilIties

The primary duties are listed as follows:

• Perform routine field inspections on equipment operating conditions to ensure safe operating limits.
• Perform unloading of chemicals/utilities into receiving tanks.
• Perform jetty operations such as berthing in of vessels, operating marine loading arms and undertake Loading Master role.
• Operate DCS to monitor and control the overall terminal process within the design parameters and to meet customers’ gas nomination requests.
• Maintain comprehensive unit logs with proper data of all activities occurring in the shift and to ensure proper changeover of shift including any follow-up activities requirement.
• Support other production activities in relation to other businesses and services such as vessel cool down, cold energy transfer, LNG Truck Loading etc.
• Perform troubleshooting on equipment and processes when necessary.
• Take corrective action to ensure unit and equipment are operated under safe and optimum conditions. Generate work orders for maintenance work on equipment when necessary.
• Secure and prepare equipment and work sites for maintenance work according to Safe Operating Procedures requirements such as equipment lock-out and tag-out, low tension electrical de-energization etc.
• Perform basic maintenance such as strainer cleaning, flange make up, gas cylinder replacement etc.
• Replenish process chemicals / additives and trigger re-stock when necessary.
• Review and issue permit to work after all safety checklist is completed and ready for maintenance activities.
• Conduct periodic fugitive emission leak detection (hydrocarbon) and execute immediate measures to minimize or eliminate leaks.
• Supervise contractors who are executing the approved works according to the established permit to work system.
• Undertake project related role when assigned; rotation between shift and day work.

The incumbent shall be part of the company’s Emergency Response Team (CERT) and perform any assigned roles and responsibilities such as but not limited to:

• Respond to terminal emergency situations as a first aid specialist or fire fighter or any other assigned roles.
• Participate in prevention and combat of hazardous situations such as loss of primary containment, oil spills and other forms of pollution and situations dangerous to life and property.
• Perform periodic safety check on work sites to ensure safety compliance enforcement such as but not limited to taking periodic gas test for confined space work.
• Perform routine safety check on all safety equipment such as safety showers, eye wash, SCBA (Self-Contained Breathing Apparatus), firefighting equipment etc. to ensure readiness and availability.

Work Experience

• Candidate must have at least 3 years’ experience in oil, petrochemical and refinery plant, utilities and cryogenic processes.
• Previous operations experience of LNG facilities is preferred but transferable skills from other hydrocarbon process or cryogenic product (e.g. LPG) loading and unloading will also be considered.
• Preferably with knowledge of plant instrumentation and control systems and DCS.
• Practical working knowledge of mechanical equipment, heat transfer equipment cryogenic equipment, centrifugal and reciprocating compressors, LNG tanks, fired equipment and flare systems.
• Experience in mechanical systems and process plants desired, knowledge of cryogenics and aspects of the natural gas industry is preferred.
• Experience in process plant safety (e.g. confined space, lock-out and tag-out, working at height, gas testing etc.) and permit to work issuing is preferred.
• Experience in plant commissioning and start-up is preferred.
• In addition, the successful candidate should possess the following personal attributes:

1. Work well in a team and with good listening skill
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments.

Education

• NITEC certificate in Mechanical, Electrical or Chemical Engineering
• Candidates with Diploma in Mechanical, Electrical or Chemical Engineering will have an advantage.

General Overview

The position is part of the Instrument Control and Electrical (ICE) team who is responsible for developing plans and schedules and providing advice to production and engineering team on all maintenance activities at the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for tasks and duties such as but not limited to the following:

• Daily planning and scheduling of maintenance tasks to carry out all required preventive, corrective and predictive maintenance of ICE asset in the Terminal
• Work closely with Mechanical, HSSE team to liaise with the Production and Jetty Operations team in the planning and analysis of each work request including coordinating the acquisition of electronic work permits.
• Carry out daily morning toolbox meeting for job assignments, briefings and any ICE-MECH work coordination communications
• Proficient in SAP to be able to carry out monitoring and scheduling of ICE PM & CM workorders, maintaining of ICE master equipment list, PM plans and raising purchase requisition for spare parts etc
• Liaise with External Authority for approval for Natural Gas Equipment maintenance request
• Close communication and co-ordination with external vendors and contractors to attend in house safety induction course, carry out site survey, site execution work etc
• Review Method of Statement and risk assessments are valid for the job
• Responsible for following up and verification that all jobs for close out are properly completed in SAP
• Raise Purchase requisitions in SAP and provide scope of supply and spare part specifications and work closely with Procurement Department for evaluation of vendor quotations for maintenance service contract/technical work outsourcing, monitoring of delivery of spare parts and materials etc
• Assist in the development of Maintenance budget, provide budget forecast, monitor and manage approved budget.
• Apply Jurong Island Pass sponsorship for external vendor.

Work Experience

• Minimum 5 (Degree) years and 8 (Diploma) years of experience in an oil and gas/petrochemical E&I maintenance supervisory or E&I maintenance planning and scheduling role
• Proficient in usage of Microsoft Office computer software and SAP systems
• Excellent organizational skills and adaptability to work in dynamic environment.

Education

• Engineering Degree/Diploma preferably in Electrical/Instrumentation/Chemical Engineering discipline.

Roles & Responsibilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

1. Carry out all preventive, predictive and corrective maintenance as directed by the Supervisor and clear completed work from the CMMS data base.
2. Responsible for the proper maintenance on various rotating and static equipment and systems including the plant piping systems and structural support systems.
3. Response and resolve work orders for any mal-functioning for static and rotating equipment in the facility. Ensure minimum down time or timely repairs of production equipment.
4. Determine materials, spares, tools and method required to complete maintenance task safely.
5. Plan and execute machinery condition monitoring and field data collection with production team and engineers.
6. Ensure all plant valves are fully operational and all mechanical components properly grease and lubricated where applicable, including carry out, strip, redress and rebuild of various types of control and plant valves.
7. Supervise and work closely with in-house contractor and equipment vendor to execute maintenance work at the terminal. Ensure safeguards are followed such as valid work permit are issued, wearing prescribed personal protection equipment etc.
8. Liaise with production team with all aspects of mechanical system testing, running, trouble-shooting, carry out material specification checks on all installed piping components such as gasket, bolts, etc.
9. Able to take on additional tasks or responsibilities as assigned by superiors.
10. Able to perform valve line up & LOTO for operations or maintenance preparations.
11. The incumbent shall be part of the Company's Emergency Response Team(CERT) and perform any assigned roles and responsibilities (ie fire fighter etc) for such purposes.

Work Experience

1. Minimum of 3-5 years practical experience in the oil and petrochemical refinery.
2. Experience in hands-on troubleshooting of mechanical/ machinery systems i.e compressor/pump and diesel/gas engine.
3. Familiar with Permit to Work system and local codes, regulations and standards requirement.
4. Proficient in usage of Microsoft Office and trained in the use of the Computerized Maintenance Management System (CMMS); ie SAP.
5. Ability to speak, write and communicate effectively in English.
6. Experience with LNG/Natural Gas or gas engine generator maintenance and operations will be an added advantage.
7. In addition, successful candidate should possess the following personal attributes:

• A team player who can work well in a team and with good listening skill
• High self-motivation with the ability to work with minimal supervision & adapt to changing priorities and assignments.
• Willing to take up new challenges and responsibilities
• Fast learner

Education Requirement

The candidate must possess a Professional Certificate/NiTEC, Diploma in Engineering (Mechanical/ Mechatronic/ Electromechanical) or equivalent.

General Overview

This position is part of the Production team performing LNG Terminal operations of loading and unloading of LNG from vessels and re-gasification process of LNG for the natural gas pipeline network supply. The position requires the incumbent to perform fieldwork and operate the DCS. The incumbent will work closely with the marine, technical and maintenance team to perform the operations.

Roles and ResponsibilIties

The primary duties are listed as follows:

• Perform routine field inspections on equipment operating conditions to ensure safe operating limits.
• Perform unloading of chemicals/utilities into receiving tanks.
• Perform jetty operations such as berthing in of vessels, operating marine loading arms and undertake Loading Master role.
• Operate DCS to monitor and control the overall terminal process within the design parameters and to meet customers’ gas nomination requests.
• Maintain comprehensive unit logs with proper data of all activities occurring in the shift and to ensure proper changeover of shift including any follow-up activities requirement.
• Support other production activities in relation to other businesses and services such as vessel cool down, cold energy transfer, LNG Truck Loading etc.
• Perform troubleshooting on equipment and processes when necessary.
• Take corrective action to ensure unit and equipment are operated under safe and optimum conditions. Generate work orders for maintenance work on equipment when necessary.
• Secure and prepare equipment and work sites for maintenance work according to Safe Operating Procedures requirements such as equipment lock-out and tag-out, low tension electrical de-energization etc.
• Perform basic maintenance such as strainer cleaning, flange make up, gas cylinder replacement etc.
• Replenish process chemicals / additives and trigger re-stock when necessary.
• Review and issue permit to work after all safety checklist is completed and ready for maintenance activities.
• Conduct periodic fugitive emission leak detection (hydrocarbon) and execute immediate measures to minimize or eliminate leaks.
• Supervise contractors who are executing the approved works according to the established permit to work system.
• Undertake project related role when assigned; rotation between shift and day work.

The incumbent shall be part of the company’s Emergency Response Team (CERT) and perform any assigned roles and responsibilities such as but not limited to:

• Respond to terminal emergency situations as a first aid specialist or fire fighter or any other assigned roles.
• Participate in prevention and combat of hazardous situations such as loss of primary containment, oil spills and other forms of pollution and situations dangerous to life and property.
• Perform periodic safety check on work sites to ensure safety compliance enforcement such as but not limited to taking periodic gas test for confined space work.
• Perform routine safety check on all safety equipment such as safety showers, eye wash, SCBA (Self-Contained Breathing Apparatus), firefighting equipment etc. to ensure readiness and availability.

Work Experience

• Candidate must have at least 3 years’ experience in oil, petrochemical and refinery plant, utilities and cryogenic processes.
• Previous operations experience of LNG facilities is preferred but transferable skills from other hydrocarbon process or cryogenic product (e.g. LPG) loading and unloading will also be considered.
• Preferably with knowledge of plant instrumentation and control systems and DCS.
• Practical working knowledge of mechanical equipment, heat transfer equipment cryogenic equipment, centrifugal and reciprocating compressors, LNG tanks, fired equipment and flare systems.
• Experience in mechanical systems and process plants desired, knowledge of cryogenics and aspects of the natural gas industry is preferred.
• Experience in process plant safety (e.g. confined space, lock-out and tag-out, working at height, gas testing etc.) and permit to work issuing is preferred.
• Experience in plant commissioning and start-up is preferred.
• In addition, the successful candidate should possess the following personal attributes:

1. Work well in a team and with good listening skill
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments.

Education

• NITEC certificate in Mechanical, Electrical or Chemical Engineering
• Candidates with Diploma in Mechanical, Electrical or Chemical Engineering will have an advantage.

General Overview

The position is part of the Instrument Control and Electrical(ICE) team who is responsible for overseeing the safe and effective site execution of all electrical maintenance services and activities at the LNG Terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for tasks and duties such as but not limited to the following:

• Ensuring compliance with SLNG safety procedures, local and international electrical codes and standards
• Supervising and lead a team of electrical technicians and contractors with installation, maintenance and repair of electrical systems and equipment
• Developing, conducting and ensuring that E&I team members complete the relevant structured on the job training program
• Conducting site work inspection and quality control checks on all electrical works
• Reviewing and approving all electrical isolation permits and excavation permits and other permist that is of electrical and instrument nature.
• Leading the investigation for electrical maintenance abnormality incidents in order to identify root causes of problem as well as recommending and implementing solutions
• Working with SLNG electrical engineers to develop and implement maintenance program for electrical equipment to ensure reliability/resolve any maintenance problems
• Conducting morning tool box meeting with a focus on safety and smooth execution of maintenance activities
• Participating in emergency response procedures and be assigned to any specific roles and responsibilities for such purpose.

Work Experience

• Minimum 8 years (or 15 years for diploma) of experience in an oil and gas/petrochemical E&I maintenance supervisory role
• Expert knowledge and proficiency in low and medium voltage electrical system, power transmission, network communication equipment, Motors, CCTV, security system, Earthing, lightning protection and PLC system is mandatory. Knowledge in DCS an added advantage to excel in the role
• In addition, the successful candidate should possess the following personal attributes:

1. A team player
2. Self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments.
3. Possess leadership quality with the ability to inspire and motivate team members to achieve their full potential, driving success and positive outcomes

Education

• Engineering Degree/Diploma preferably in Electrical/Electronic/Instrumentation/Chemical Engineering discipline.

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

1. Carry out all preventive, predictive and corrective maintenance as directed by the Supervisor and clear completed work from the CMMS data base.
2. Responsible for the proper maintenance on various rotating and static equipment and systems including the plant piping systems and structural support systems.
3. Response and resolve work orders for any mal-functioning for static and rotating equipment in the facility. Ensure minimum down time or timely repairs of production equipment.
4. Determine materials, spares, tools and method required to complete maintenance task safely.
5. Plan and execute machinery condition monitoring and field data collection with production team and engineers.
6. Ensure all plant valves are fully operational and all mechanical components properly grease and lubricated where applicable, including carry out, strip, redress and rebuild of various types of control and plant valves.
7. Supervise and work closely with in-house contractor and equipment vendor to execute maintenance work at the terminal. Ensure safeguards are followed such as valid work permit are issued, wearing prescribed personal protection equipment etc.
8. Liaise with production team with all aspects of mechanical system testing, running, trouble-shooting, carry out material specification checks on all installed piping components such as gasket, bolts, etc.
9. Able to take on additional tasks or responsibilities as assigned by superiors.
10. Able to perform valve line up & LOTO for operations or maintenance preparations.
11. The incumbent shall be part of the Company's Emergency Response Team(CERT) and perform any assigned roles and responsibilities (ie fire fighter etc) for such purposes.

Work Experience

1. Minimum of 3-5 years practical experience in the oil and petrochemical refinery.
2. Experience in hands-on troubleshooting of mechanical/ machinery systems i.e compressor/pump and diesel/gas engine.
3. Familiar with Permit to Work system and local codes, regulations and standards requirement.
4. Proficient in usage of Microsoft Office and trained in the use of the Computerized Maintenance Management System (CMMS); ie SAP.
5. Ability to speak, write and communicate effectively in English.
6. Experience with LNG/Natural Gas or gas engine generator maintenance and operations will be an added advantage.
7. In addition, successful candidate should possess the following personal attributes:

• A team player who can work well in a team and with good listening skill
• High self-motivation with the ability to work with minimal supervision & adapt to changing priorities and assignments.
• Willing to take up new challenges and responsibilities
• Fast learner

Education Requirement

The candidate must possess a Professional Certificate/NiTEC, Diploma in Engineering (Mechanical/ Mechatronic/ Electromechanical) or equivalent.

General Description

The incumbent is part of the ICE team who oversees safe and effective execution of all instrumentation and electrical maintenance services at the LNG Terminal.

Roles & Responsibilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

• Execute preventive and breakdown maintenance for all instrument and electrical equipment in a timely and cost effective manner
• Perform basic calibration, tuning and troubleshooting activities for process transmitters, control valves, programmable logic controllers, supervisory control and data acquisition, analysers, gas metering flow computer system, tank gauging system, ACMV, Fire and Gas System
• Perform maintenance and troubleshooting activities on motors, MCC, transformers and switchgears, variable speed drive, UPS, gas engine generators among others
• Perform electrical tag out and log out for specific work orders under supervisors’ instructions
• Maintain proper PM records performed and update records of all jobs performed in SAP application
• Provide support on plant modification work such that it is carried out in safely and in accordance to quality standard set by the company
• The incumbent shall be also be part of the company’s Emergency Response Team (CERT) and perform any assigned roles and responsibilities (i.e fire fighter etc) for such purposes.

Work Experience

• Candidates should have a minimum of 3 years relevant experience in the oil and petrochemical refinery or power generation industry
• Familiar with permit to work system, hazardous area classifications and Process Plant Workplace Safety and Health requirement
• Proficient in usage of Microsoft Office and trained in the use of the CMMS SAP

Education

Candidate shall be equipped with professional Certificate/NITEC, Diploma in Engineering (Electrical and Electronics)

In addition, the successful candidate should possess the following personal attributes:

1. A team player who can work well in a team and with good communication skills
2. Willing to take up new challenges and responsibilities
3. Meticulous with good safety mindset and have good analytical problem-solving skills