Total 230 operations engineer job vacancies in Maintenance / Repair category in Singapore

• Equipment Maintenance and Troubleshooting: Oversee the maintenance, troubleshooting, and repair of container handling equipment such as cranes, straddle carriers, reach stackers, and forklifts to ensure continuous operational efficiency.
• Preventive Maintenance Scheduling: Develop and implement preventive maintenance programs to reduce downtime, enhance equipment lifespan, and optimize overall performance.
• Equipment Calibration and Upgrades: Ensure the accurate calibration of equipment systems and coordinate upgrades or retrofitting to meet technological advancements and compliance standards.
• Operational Support: Provide technical support to operations teams, assisting in diagnosing and resolving equipment-related issues promptly to minimize operational disruptions
• Safety Compliance: Ensure all equipment adheres to safety regulations and operational standards, conducting regular safety inspections and ensuring that equipment is used safely and efficiently.
• Equipment Performance Monitoring: Use diagnostic tools and systems to continuously monitor the performance of port equipment, analyzing data to identify trends, optimize performance, and prevent equipment failure.
• Budget and Cost Management: Assist in the budgeting process for equipment-related expenditures, such as maintenance costs, spare parts, and repairs, and work to control costs while maintaining operational readiness.
• Vendor and Supplier Management: Liaise with equipment manufacturers, service providers, and suppliers to procure spare parts, arrange for repairs, or source new equipment, ensuring quality and cost-effectiveness.
• Training and Development: Train and mentor port staff and technicians on proper equipment operation, maintenance procedures, and safety protocols to enhance team competence and reduce errors.
• Root Cause Analysis and Reporting: Conduct root cause analysis of equipment failures or inefficiencies and provide detailed reports with recommendations for improvements or corrective actions.

Requirements:

• NITEC/Higher Nitec/Diploma in a technical discipline
• Those without the stipulated qualifications but with related technical experience are also welcome to apply
• Willing to work outdoors, at heights and on weekends

Wong Li Qi (Jolin)

R2096313

Job Descriptions:

• Conduct regular checks to ensure building facilities are maintained at high standards
• Carry out minor repairs / trouble shooting works
• Attend to tenants’ requests for maintenance related matters
• Able to carry out works (e.g. painting, carpentry work etc. when necessary)
• Perform any other duties as assigned

Job Requirements:-

• NTC 2/3 or NITEC in Mechanical / Electric / Building
• Computer skills in MS Words and Excel
• At least 1-year relevant working experience in maintenance of M & E systems and building facilities and implementing improvement works

We regret that only shortlisted candidates will be notified.

Job Scope:

The successful candidates will be involved in the operations of the assigned process plant units involving work in the field and at the control panel:

• Perform field patrolling to monitor site conditions and take corrective actions to ensure safe and smooth plant operations
• Perform frontline trouble-shooting to address deviations, improve plant reliability & process safety
• Prepare equipment for maintenance and re-commissioning activities
• Ensure safe and smooth operation of plant facilities, such as exchangers, rotating equipments etc

Requirements:

• Diploma in Chemical Engineering / Chemical Process Technology, OR
• Nitec / Higher Nitec in Chemical Process Technology, OR
• GCE ’O’ Level with credits in Physics or Chemistry, and Mathematics
• Must be prepared to work on 3 rotating shifts

The Job
The Technician will learn how to operate the terminal system by executing and maintaining the day-to-day operation in accordance with company’s work procedure under the supervision and direction set by operations and company management team.

Key responsibilities:

• Carry out the daily action plan and update the checklist accordingly.
• Perform routine check on valves and pumps status on a regular basis.
• Ensure samples are collected and recorded properly.
• Conduct ship/shore conference and berthing/unberthing vessels.
• Ensure running pumps are in good order.
• Ensure TPI/CPI are skimmed.
• Assume the role of auxiliary fire fighter during the event of emergency.
• Carry out housekeeping in the assigned area.
• Supervise the blinding/de-blinding work.
• Perform tank de-gassing, gas-test for hot work and confined space entry.
• Perform WDO & Tank Farm draining as per operations requirement.
• Perform tank gauging & temperature measurement.
• Carry out daily patrol rounds and update shift logs.
• Any other tasks as and when assigned by the management.
• Adhere to the company’s HSSE (Health, Safety, Security and Environment) Policy.

Job Requirements

• Minimum N’ level.
• Preferably tertiary education in petrol chemical or related course.
• Strong interest in oil and gas industry.
• Ability to engage in critical analysis.
• Ability to function well in stressful situations.

Our client

30 Years Old Reputable facility management company.

Job scope

· To manage sub-contractors for hard and soft facility management activities for exp preventative maintenance of building M&E equipment (Aircon), pest control, horticulture, security management

· Hands on experience with documentation n root cause analysis report for the prevention of future occurrences.

Requirement

· 3 years of experience in facilities operations.

· Diploma in Facilities Management

For better response, Please submit resumes here OR

https://zurl.to/olgh?source=CareerSite

https://recruitmentalliance.zohorecruit.com/jobs/Careers

The TP ICAP Group is a world leading provider of market infrastructure.

Our purpose is to provide clients with access to global financial and commodities markets, improving price discovery, liquidity, and distribution of data, through responsible and innovative solutions.

Through our people and technology, we connect clients to superior liquidity and data solutions.

The Group is home to a stable of premium brands. Collectively, TP ICAP is the largest interdealer broker in the world by revenue, the number one Energy & Commodities broker in the world, the world’s leading provider of OTC data, and an award winning all-to-all trading platform.

Founded in London in 1866, the Group operates from more than 60 offices in 27 countries. We are 5,200 people strong. We work as one to achieve our vision of being the world’s most trusted, innovative, liquidity and data solutions specialist.

Job duties:

• Liaise with Landlord on work permit application
• Support vendor and service delivery
• Maintain and support facilities by collaborating with contractors and vendors in adherence to all rules and regulations.
• Proactively attend to complaints or abnomalities and resolve the issues timely.
• Working closely with appointed Fire Safety Manager (FSM) to manage all fire safety matters of premises. Attend to all fire alarm activations and facility issues, identifying the cause with follow up reporting on a timely manner.
• Carry out routine inspection to look out for defects and mechanical & electrical faults. Coordinate or administer works to ensure all faults and defects are attended to and rectified.
• Maintain proper administration and documentation to support all maintenance activities and projects.
• Attend to facilities maintenance within Singapore office.
• Support receptionist
• Any other ad-hoc duties as assigned.

Requirements:

• At least 2 years of relevant working experience in facility management or related fields is preferred.
• Diploma in Facilities Maintenance and or Engineering or equivalent.
• Certified Fire Safety Manager will be an added advantage.
• A hands-on person who has knowledge of basic handyman work (eg. changing of lightings, troubleshooting electrical appliances, putting up of festive decorations, housekeeping etc.) and enthusiasm to be on the ground.
• Able to communicate and collaborate effectively with contractors/ vendors, as well as all office staff.

Person Specification

Skills

Client Focused

• Personable and engaging

• Communicates effectively and efficiently to internal and external stakeholders

• Build relationships and networks with both internally and externally wherever possible

• Demonstrates strong customer focus

• Demonstrates ability to work effectively with others

• Constructively handles disagreements to reach a resolution

• Ability to work with diverse groups/ personalities

Innovative

• Open to innovative ideas/ experiences and ability to create new ideas, approaches or insights

• Seeks opportunities for improvements

• Handles situations and problems with innovation and creativity

Dynamic & Competitive

• Demonstrates high levels of energy in seeking out and achieving new goals

• Goes that “extra mile”

• Is a self-starter

• Shows evidence of being comfortable working in fast paced or pressured environments

• Enjoys a challenge and is able to escalate

• Does not give up easily

Open & Communicative

• Adapts communication style to suit audience

• Projects personal credibility

• Interacts confidently without being overbearing

• Ability to work effectively in a high pressure environment

• Keeps emotions under control in difficult situations

• Handles criticism constructively

Professional Integrity

• Able to demonstrate honesty, integrity and professionalism

• Promotes loyalty to TP ICAP and its principles

• Works ethically and shows respect for both professional and company values

Effective

• Excellent attention to detail, highly organised with a proactive approach

• Strong analytical ability and problem solving skills

Job Description

• Responsible for overseeing the management, maintenance, and operations of buildings and facilities.

• Supervise and lead a team of contractors in performing maintenance work.

• Plan and implement preventive maintenance schedules.

• Conduct regular safety inspections and audits to identify hazards and ensure compliance with workplace safety policies.

• Generate regular reports for management regarding the condition and operations of the facility for further improvement.

• Monitor and control costs related to M&E operations to ensure they stay within budget.

• Ensure M&E systems comply with local building codes, safety regulations, and environmental standards.

Job Requirement

• Good interpersonal and communication skills

• Strong working experience in facilities management and equipped with good technical knowledge in M&E and building maintenance services

• Ability to lead and manage maintenance teams and external contractors effectively

• Willing to work and station in oversea, as oversea allowance and accommodation will be provided

AngelineMah

Reg No: R2096146

One Vogue Pte Ltd

EA License: 19C9629

Responsibilities:

Day-to-day installation and maintenance of services, within compliance to the safety regulations,Offsite backup tape maintenance

iPort operations maintenance support includes:

• Cranes maintenance - visual checks on network devices, power cable, UTP, fibre for any physical damages and checking for fibre losses
• Lighting mast maintenance – to facilitate the lowering of lighting mast together with other counterparts
• Onsite power maintenance – checks on cables for loose ends and make sure equipment are powered after any power maintenance.
• iCabling Works including terminating of low voltage single phase electrical power (ceeforms) cables, fiber optic cable and structure cabling related which closely related to data centre operations across
• Supervise and escort contractors to facilitate replacement of hardware/ equipment i.e. network switches and servers.
• Involve in relocation/ redeployment/ movement of hardware/equipment i.e. network switches and servers from premise to premise
• Basic network and PC troubleshooting
• Co-ordinate with end user from Business Units to resolve issues and also provide and restore in-scope services.

Requirements:

• 2-3 years of working experience in the telecommunications/ data centre related industry in the operational field OR
• Possess a Certificate from Institute of Technical Education ("ITE') in a relevant course
• Class 3 driving license for vehicles and be able to work independently without supervision.

Job Descriptions

• Support the Operations Manager in managing effective operations and maintenance of our retail mall.
• Coordinate operation programs and execute maintenance works to ensure the mall operates at optimum level
• Assist in annual budgeting, managing and administering all maintenance contracts and supervising expense for the operational needs of the mall
• Assist in the implementation of renovation works carried out by tenants and operational support for the promotional activities of the mall
• Liaise with Contract & Procurement team, manage and execute specific/adhoc procurement of equipment cyclical replacement & enhancement works in the mall.
• Manage and attend to all feedback and service requests in a timely manner
• Lead the technicians and manage vendor services to achieve the required professional standards in day-to-day operations
• Part of Company Emergency Response Team (i.e. Site Incident Controller, First Aider, etc),
• Part of Environmental Health Safety (EHS) team for review & approval of permit to work (PTWs), risk assessment, safety checks/audits of the mall.

Requirements:

• Degree in Engineering (Mechanical/Electrical) / Real Estate / Facilities / Building / Estate Management
• Exhibit strong initiative, leadership, and interpersonal skills
• Able to work within tight timelines, resourceful and systematic in resolving problems
• Good communication skills
• Willing to work beyond standard operating hours, when required
• Willing to learn and open to possible lateral movements between asset classes in the future (based on business needs)

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg. R22111375 Chua Jie Lin

Job Summary:

We are seeking an experienced Facilities Engineer to manage and optimize our building systems, infrastructure, and assets. The ideal candidate will oversee maintenance operations, ensure regulatory compliance, and implement strategies for efficient and sustainable facility management.

Key Responsibilities:

Asset Management:

• Maintain and update asset records in the asset management system
• Conduct regular criticality and condition assessments
• Develop and implement maintenance strategies
• Produce annual and yearly asset capital replacement plans

Maintenance Operations:

• Oversee planned, preventive, and reactive maintenance for all facility assets
• Manage statutory inspections and testing
• Coordinate specialist engineering and handyman services
• Ensure compliance with health, safety, and environmental regulations

Technical Administration:

• Manage records, O&M manuals, and technical documentation
• Operate building management systems
• Oversee work order management and performance monitoring
• Maintain technical library and manage subcontractors

Infrastructure Management:

• Maintain site infrastructure including HVAC, electrical, plumbing, and security systems
• Oversee building fabric maintenance and site infrastructure upkeep
• Manage specialized systems (e.g., lifts, fire systems, water management)

Project Management:

• Initiate and manage capital projects and improvements
• Coordinate with contractors and vendors for installations and upgrades
• Manage project budgets and timelines

Compliance and Safety:

• Ensure adherence to all relevant regulations and policies
• Manage permits, licenses, and certifications
• Conduct risk assessments and implement safety measures

Reporting and Analysis:

• Prepare regular reports on asset performance and condition
• Analyze maintenance data to identify trends and improvement opportunities
• Provide recommendations for cost savings and efficiency enhancements

Requirements

• Bachelor's degree in Mechanical, Electrical, or Civil Engineering
• 3 years of experience in facilities management or building engineering
• Strong knowledge of building systems and asset management principles
• Familiarity with CMMS and building automation systems
• Experience with project management and budget control
• Understanding of relevant regulations and industry standards (e.g., ISO 55000)
• Excellent problem-solving and leadership skills
• Relevant certifications (e.g., PE, CEM, FMP) are a plus

The ideal candidate will be a hands-on leader with strong technical expertise, capable of managing complex facility operations while driving continuous improvement and efficiency.

Main Job Function: Responsibilities:

• Overall responsible for Aftersales services and customer coordination
• Installation, commissioning, repair and preventive maintenance of Compressed Air systems
• Conduct on-site training to customers.
• Service Report Management,
• Spare Parts Ordering & Processing for jobs and stock
• Organizing goods for projects and coordinating Deliveries when required
• Prepare quotations for service jobs and follow up.
• Warranty handling

Pre-requisites:

· Advance Diploma in Mechatronic/Mechanical/Electrical Engineering

· Able to work independently with good analytical, communication and interpersonal skills.

· Willing to travel in Asia region for After-Market Support and training when required

· Team player who is self-motivated

· Knowledge on Screw & Piston compressors preferred Both Oil Lubricated and Oilfree

· Class 3 driving license would be added advantage.

· Able to speak and write good English

· Able to speak in Chinese (Mandarin) will be of advantage

· Knowledge of using computer for communication and use in controller repairs

· Technical knowledge with related to Air compressors/machinery & parts

· Over 2 years work experience in similar work environment would be an added advantage

Interested applicant, please email in with a detailed resume with photograph and stating expected salary to:

Nalin Amunugama

General Manager BOGE Asia Pacific

Email: [email protected]

-Provide engineering expertise and technical assistance for installation, maintencance, troubleshooting and repairs of automatic and electrical device, loct, etc.

-Conduct scheduled, preventive and ad-hoc maintencance at customers' premises

-Attend emergency site issue and respone to sited within time frame

-Manage, prepare and maintain proper reports and records for maintenance

-Assist in other business activities as and when assigned

Requirement

-Candidate must possess at least Diploma / Advanced / higher / Graduate Diploma, Bachelor's Degree / Post Graduate Diploma / Professional Degree in Engineering (Electrical / Electronic) or equivalent.

-At least 3 Years of working experience in the related construction field is required for this position

-Preferably Junior Executive Specialized in Engineering - Electrical or equivalent

• To plan and execute corrective/preventive maintenance on facility equipment and production equipment to ensure good efficiency and availability.
• Implement TPM program in HPSL such as autonomous maintenance and critical spare part management.
• Engage external equipment vendor for service contract and ad hoc diagnostic or corrective maintenance activities.

Support safety and EHS related activities and audits.

Description of Responsibilities and Duties

1. Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.
2. Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.
3. Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.
4. Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.
5. Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.
6. Perform site EHSS inspection/audits and ensure that all corrective / preventive actions are close in timely manner. Responsible for internal/external audits and EHSS activities.
7. Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience
8. Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Knowledge:

• Hands on experience in mixer and milling equipment maintenance is an advantage.
• Knowledge in TMP, Equipment FMEA is an advantage.
• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.
• EHS competence, familiar with ISO45001 & ISO14000 is a plus.

Skills:

• Able to read electrical, hydraulic, pneumatic and mechanical diagrams and carried out maintenance work accordingly.
• Lead and guide technicians on above work.

Abilities:

• Operational hands-on experience
• Work under pressure and multi-tasking.
• A good team player and have good interpersonal skills
• Safety conscious

Education:

Degree/Diploma in Mechanical Engineering or equivalent

Experience:

• Minimum 5 years of relevant working experiences
• Experience in chemical and mechanical process

Competencies:

• Fast Learner
• Willingness to learn
• Self-Initiative
• Team Spirit
• Self-responsibility
• Physical Fit

Working Conditions:

Chemical Production Environment. A skin allergy/blood count medical test may be required as part of the employment medical checkup.

Main duties:

• Instrumentation team profile selection.
• Instrumentation works follow-up, correcting deviations with respect to the foreseen schedule.
• Instrumentation progress reporting.
• Interface with the Client
• Identification and assessment of client requirements out of scope.
• Works assignment within the instrumentation team.
• Co-ordination with other design disciplines,scheduling, cost control, Procurement and TR project management.
• Meetings with suppliers.
• Revision and approval of all instrumentation documents.

Main requirements:

• At least 5 years of experience in the same position in oil and gas projects.
• Enforcing obedience to Safety and Environment regulations, reviewing safety and environment manuals. Ensuring operational readiness off all emergency equipment in the Contractor.
• Knowledge of drafting tools: AutoCAD, uStation
• Experience in Fieldbus design
• Experience in DCS/ESD/F&G specifications.
• Knowledge of Process design.
• Knowledge of up-to-date instrumentation technologies and suppliers
• Proven experience in detail engineering of industrial plants.
• Intools expert user.
• Experience and understanding the EHS requirements

Working Place: Jurong Island

We are seeking a Maintenance Engineer with a focus on security and CCTV systems to ensure the smooth operation and maintenance of our security infrastructure. You will be responsible for installing, troubleshooting, maintaining, and repairing security systems, including CCTV cameras, access control systems, and alarm systems, ensuring they are fully functional and secure.

Responsibilities:

• Install, configure, and maintain CCTV systems, including cameras, recording devices, and related infrastructure.
• Perform regular maintenance checks and troubleshoot any issues related to security systems.
• Conduct system inspections and provide repairs or replacements as needed to ensure system reliability.
• Monitor and maintain access control systems to safeguard restricted areas.
• Ensure that all security systems are compliant with industry standards and best practices.
• Respond to security system alarms, analyze events, and provide recommendations for system improvements.
• Document all maintenance activities, service reports, and system configurations.
• Stay updated with the latest security technologies and trends to ensure systems remain secure and efficient.

Qualifications:

• A graduate in Engineering, Electronics, or a related field (or equivalent experience).
• Knowledge of security systems, including CCTV, access control, and alarm systems.
• Experience with CCTV camera installation, configuration, and troubleshooting.
• Basic understanding of networking and IP-based security systems.
• Ability to work independently and as part of a team.
• Strong problem-solving skills and attention to detail.
• Excellent communication skills and ability to document technical information clearly.
• Must be willing to do OT and standby when necessary.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Responsibilities:

• Develop and deploy machine learning models: Design, build, and optimize machine learning models and algorithms to solve specific business problems. Collaborate with cross-functional teams to gather requirements, define objectives, and deploy models into production environments.
• Model training and evaluation: Train and fine-tune machine learning models using appropriate algorithms and techniques. Evaluate model performance and identify areas for improvement, employing techniques such as cross-validation, hyperparameter optimization, and ensemble methods.
• Model deployment and integration: Collaborate with software engineers and DevOps teams to deploy machine learning models into production environments. Implement APIs and integrate models with existing systems and applications to enable real-time decision-making.
• Performance monitoring and maintenance: Monitor model performance and address any issues or anomalies that arise. Continuously improve models by refining algorithms, optimizing code, and incorporating feedback from users and stakeholders.
• Data analysis and insights: Perform exploratory data analysis, generate insights, and present findings to stakeholders. Use statistical methods and visualization techniques to communicate complex concepts and patterns effectively.
• Stay up-to-date with the latest advancements: Keep abreast of the latest research and trends in machine learning and artificial intelligence. Evaluate and recommend new tools, libraries, and methodologies to enhance the efficiency and effectiveness of the machine learning workflow.

Requirements:

• Education: Bachelor's or Master's degree in Computer Science, Data Science, Machine Learning, or a related field. An equivalent combination of education and experience will also be considered.
• Experience: At least 2 years’ experience working in a similar role. Hands-on experience in designing, developing, and deploying machine learning models in real-world applications.
• Solid understanding of machine learning algorithms, techniques, and libraries (e.g., TensorFlow, PyTorch, scikit-learn).
• Experience with working on Large Language Models and Generative AI technology is a plus.

Technical skills:

1. Strong programming skills in languages such as Python.
2. Proficiency in machine learning frameworks such as TensorFlow, PyTorch, or Scikit-Learn etc.
3. Solid understanding of Statistical Analysis, Probability Theory, and Hypothesis Testing.
4. Familiarity with machine learning tools on cloud platforms (e.g., AWS, Azure, GCP) and distributed computing frameworks (e.g., Spark) is a plus.
5. Problem-solving and analytical mindset: Ability to analyze complex problems, break them down into solvable components, and develop innovative machine learning solutions. Strong mathematical and analytical skills are essential.
6. Communication and collaboration: Excellent verbal and written communication skills, with the ability to convey technical concepts to both technical and non-technical stakeholders. Proven ability to work collaboratively in a team environment and effectively manage multiple priorities.
7. Adaptability and continuous learning: Willingness to adapt to evolving technologies and learn new tools and techniques. Demonstrated commitment to staying updated with the latest advancements in machine learning and artificial intelligence.

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Key Roles and Responsibilities

• Prepare generating unit activities to come on stream in accordance with real time dispatch schedule.
• Respond appropriately to system defects, and rectify problems as required.
• Carry out all Plant operating activities, including isolation, in line with operational guidelines.
• Carry out all routine Plant tests and periodic auxiliary equipment changeover in accordance with approved procedures and schedules.
• Schedule, act and document authorities for maintenance work as required.
• Identify and report defective plant and equipment.
• Maintain accurate, up-to-date and timely records of all key operational activities.
• Closely monitoring the operational parameters in the DCS, carryout routine checklist, routine test and suggestion for improvements.
• Take up the role of Authorized Person (AP) as per the PTW procedure.
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)

Major Challenges

• Start-up/Shut down Gas turbine and steam turbine as per start-up/shut down schedule.
• Act in emergency to avoid undue trips to process steam export and meet the load schedule without any non-conformance.
• Investigate plant abnormalities, and take corrective course of action during shift (plant trips, unit de-ration, occurrence of fire etc.)

Key Decisions & Dimensions

• Carry out first-level maintenance as required.
• Carry out routine GT fuel changeover and equipment changeover without affecting the plant operation.
• Assist shift engineer in analyzing the problem encountered and find solution/procedure/practices to avoid the repetition.
• Monitor performance and maintain optimum unit efficient during operations.

Qualifications & Experience

• Minimum NITEC with relevant technical qualification
• Preferably two years of relevant experience

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Responsibilities:

• Maintain Troubleshoot, repair, services & maintain.
• Perform on-site and in-house Conyrol and services / repair.
• Complying with service standards, work instructions and customers' requirements.
• Servicing works (maintenance service, chemical treatment, overhaul treatment and etc.)
• Carry out preventive and breakdown maintenance.
• Trouble shoot and resolve technical issues.
• Testing and commissioning of the equipment.
• Report all problems identified during preventive maintenance and carry out repair works.
• Ensure drain pipe is free of dust/dirt and draining properly.
• Performing jobs promptly and efficiently.
• Lead the team of technicians to carry out work efficiently.
• Send workers from Place of Stay to various work sites and vice versa.
• Purchase, collection and delivery of materials/goods from supplier or vendor to sites.
• Perform loading and unloading of goods/materials.
• Ensure timely delivery of goods/materials to sites.
• Perform basic maintenance / upkeeping of vehicle.
• Any other duties as assigned.

Requirements:

• Preferably at least 4 years of relevant supervisory and hands-on experiences in maintenance, troubleshooting and systems.
• Must be independent and must be able to lead the team of technicians.
• Able to work under pressure and in a fast-paced environment.
• Physical work required and be able to work long hours.
• Class 3 with forlift licence.
• Diploma/Degree education on field.
• All races welcome.

Job Scope:

• Maintain assigned facilities to ensure they are in optimal condition.
• Supervise, plan, and implement all maintenance activities effectively.
• Conduct periodic inspections to identify and resolve potential issues.
• Diagnose problems and initiate timely corrective actions for maintenance issues.
• Plan and schedule routine maintenance, including managing shutdowns and turn-ons.
• Attend to maintenance requests and provide 24/7 emergency standby support.
• Issue work orders and provide status updates to the Facilities Support Coordinator.
• Undertake additional tasks assigned by the Company as appropriate.

Requirements:

• Minimum Diploma in Electrical, Mechanical, or Building Services Engineering, or equivalent.
• At least 1 year of relevant experience in mechanical & electrical installation and facility maintenance.
• Basic computer proficiency, including Word, Excel, and AutoCAD.
• Strong interpersonal skills with the ability to work independently and stay self-motivated.

Industry: Engineering and Facilities for Manufacturing

Location: West area

Schedule: 5-day work week

Skills: Building Facilities, Electrical and Repair Management

We are assisting a Singapore Multi-national Company with Global presence in the Engineering, Manufacturing and High-Tech Industry.

Position Responsibilities:

• The primary scope is to oversee the upkeep and maintenance of the Building Facility which will include (but not limited to) Electrical, Mechanical, Electronics and major and minor work related to the building.
• Will be the handy man and lead for inspections, remedial works, audit inspections and engaging with third-party contractors (eg: Waste Management, Pest Control)
• Handle purchase orders for parts replacements, severe maintenance or overhauling.

Position Requirements:

• Diploma in Engineering and/or Facilities Management, Building Services.
• 3 to 5 years’ experience in M&E Facilities Management experience.
• Ability to lead and supervise technicians and contractors.
• Good verbal and able communicate with various stakeholders and colleagues for guidance and consultation.
• SG Drivers Licence strong preference.

We will consider all candidates but will prioritise those who have closer requirements to client needs.

Thank you!!

Joseph Syho

Reg Number: R1108657

EA Licence No: 18C9079

Job description

DataForce by TransPerfect is looking for a highly motivated Machine Learning Engineer to join our onsite team on a fixed-term assignment in Singapore for an exciting new AI project!

Role Summary

As a Machine Learning Engineer, your responsibilities include working with language data and creating, categorizing, auditing and improving lexical data. To do this job successfully, you need solid programming skills and language fluency in Malay.

You will be part of an onsite team with diverse skills and backgrounds, who will help brainstorm and find innovative solutions to complex issues.

Main responsibilities:

• Work with language data and create, categorize, audit, and improve lexical data
• Develop natural language processing code specific to Malay language
• Provide input and suggestions in finding new approaches and new product features tailored to home market
• Find innovative solutions to complex issues
• Automate and integrate workflows from diverse systems
• Daily interactions with other teams working towards the same goal

Job requirements

• Familiar with programming languages (Python, Shell, Java or Swift)
• 1+ years of work or internship software engineering / development experience in diverse technical areas
• Proficiency in Malay language is required since you will work with Malay content (read and process documents, analyze and label data in Malay language)
• Data processing skills and knowledge
• Experience with one or more version control systems with a preference for Git
• Familiar with regular expression
• Basic team collaboration skills (email, messaging, calendar, etc.)
• Full-time onsite position

Education:

• B.S/MSc in Computer Science, Electrical Engineering, or related fields

Preferred Requirements:

• Experience in natural language processing (NLP), machine learning, or related sub-fields is a plus
• iOS or Mac OS X development skills preferred if any

DataForce by TransPerfect is part of the TransPerfect family of companies, the world’s largest provider of language and technology solutions for global business, with offices in more than 100 cities worldwide. We offer high-quality data for Human-Machine Interaction to some of the most prestigious technology companies in the world. Our department focuses on gathering, enriching and processing data for Machine Learning in different AI domains.

To learn more about DataForce please visit us at https://www.transperfect.com/dataforce

We are currently looking for an Electrical, Instrumentation & Control Engineer to support multiple projects in Singapore.

Your day to day role would involve the following activities:

• Experience across a broad range of site electrical and instrumentation engineering projects; experience in industrial buildings (Pharmaceutical, Food or Mission Critical projects) would be an advantage
• Progress reporting and manhour control for the electrical and instrumentation scope.
• Participate in troubleshooting and root cause investigation
• Work closely with calibration vendor and site team

We would like to hear from candidates who have:

• Min Degree in Electrical Engineering or its equivalent
• Min 6 years of relevant working experience in loop check, read drawings in building construction industry.
• Good knowledge of electrical and instrumentation specifications & requirements
• Be able to work independently with minimum guidance and under pressure to meet tight deadlines
• A strong ethical approach to safety, quality, environmental protection and business
• A proven track record working closely in partnership with clients and contractors

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Maintenance Engineer
• Working Location: Bukit Batok
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $3,000 + Variable Bonus + OT
• Duration: Permanent Role

Key Responsibilities

• Create and execute regular maintenance plans for all machinery and equipment.
• Identify and fix issues with mechanical, electrical, and pneumatic systems in CNC machines and other equipment.
• Help with setting up and starting new equipment.
• Keep detailed records of all maintenance work, including logs, reports, and manuals.
• Follow all health and safety rules and foster a safe workplace.
• Spot areas for improvement and introduce changes to better equipment efficiency and reliability.
• Manage spare parts inventory and handle ordering as required.
• Cooperate closely with production, quality, and engineering teams to meet operational objectives.

APPLY NOW!!!

• Bachelor's degree or Diploma in Electrical or Mechanical Engineering or related field.
• 3-5 years in maintenance engineering in related field
• Good understanding of CNC machines (Fanuc control) and PLC programming.
• Experienced with AUTOCAD and Microsoft Office Suite.
• Willingness to work outside regular hours if necessary

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67933 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Prepare and review Instrumentation, Control and Automation (ICA) Works specifications.
• Assist the ICA Lead and manage the engineering design works for the Control System Architecture, Data Communication Networks, Functional Design Specification (FDS), Process Control Narrative (PCN) and Process Instrumentation Diagrams (P&IDs), Programmable Logic Controller / Distributed Control System (PLC/DCS) and Supervisory Control and Data Acquisition (SCADA) and any other ICA Works as required.
• Handle equipment package and procurement including technical specifications preparation, technical clarification, technical bid analysis, etc.
• Collaboration with multiple stakeholders including internal teams of different trades, clients, consultants, other packages contractors, sub-contractors and vendors to ensure success of the project.
• Prepare, review and liaison with subcontractor(s) in the design and submission, ensuring all project specifications and design standards are met.
• Work with cross function project team to support project activities, i.e. schedule, process, progress claims, work progress, etc.
• Manage and supervise the project execution, site installation, inspection, testing and commissioning, plant proving related to Instrumentation, Control and automation system and interface works with other disciplines and all stakeholders.
• Attend to clients’ comments and ensure clients’ approval & acceptance to all ICA related design, installation and Testing & Commissioning Works.
• Resolve the site technical related matters.

Design, Engineering, FAT, Installation, Testing and Commissioning of:-

• System Control PLC/DCS and SCADA.
• Input / Output list
• Data Communication Network and ICA Panels.
• Instruments.
• FAT and SAT of Interfacing Panels, Instruments, Pumps, etc.
• Cable Support System.
• Cabling & Termination Works.

Requirements

• Degree in Electrical & Electronic Engineering / Instrumentation & Control Engineering / Advanced Diploma in Process Control and Instrumentation.
• Experience in Selection, Installation, Testing and Commissioning of the Instrumentation.
• Experience in ICA engineering Works, preferably in water/wastewater projectswill be an added advantage.
• Experience in Programming of PLC/DCS and SCADA.
• Experience in Project Execution, Supervising and Coordination with subcontractors, consultant and Client.
• Good knowledge in Microstation/Autocad software.
• Good technical understanding and experience in water, wastewater and environmental engineering works.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.
• Minimum 5 years relevant experience in engineering, installation, testing and commissioning of ICA Works.
• Able to work in the Tuas South area, in Singapore.