Total 1,382 Maintenance / Repair job vacancies in sgp tuas south ave 6

General Duties:

• Assures the regularity of the production operations (reactions, distillation, transfers etc..)
• Verifying the control panels and control instruments (DCS, alarms, etc.) the process parameters.
• To carry out plant areas patrol to ensure orderliness during the shift.
• Check and ensure that the documentation record is properly (to inform when any deviation or missing data, wrong data record etc.).
• Ensure that the entire operations are following quality, EHS and SOP requirements.
• Carry out daily housekeeping and meets the acceptable standard (5S).
• To ensure all the routine works is carried out as per instruction.
• Collaborates with the Warehouse to pick up materials (raw material and / or process solvents) from delivery areas to the shop floor
• To have a positive mindset of continue update himself by take-up of internal or external training for further requirement.
• To participate in company activities (TPM, KYT, Near miss and Kaizen etc.).
• Set and achieve targets.

Requirements:

• Candidate must possess at least NITEC in Chemical related courses
• Must have a good working attitude, good safety and GMP compliance knowledge.
• Must be able to perform 3 rotating shifts, including weekends and public holidays.
• Experience in a pharmaceutical or chemical process plant will be an added advantage.
• Full-Time position(s) available.

Role Summary

On site facility maintenance, simple machine maintenance and working with vendor to resolve facility or machine operation & safety concern.

Essential Responsibilities:

• Define the management of the outsourced relationship.
• Support in detections and signals flaws in approaches, methods, procedures and processes and suggests improvements.
• Handles communication with direct colleagues and support the business about data gathering and analysis.
• Contributes and support to resolve facility/machine/safety concern as a team member.
• Engage with employees and contractors to ensure safety practices.
• Support HSE to drive workshop best practices & HSE culture and enable business growth through risk management and control processes.
• Support in incident investigation, site audits and inspections.
• Support HSE to complete all required metrics – Key Performance Indicators (KPIs) in the company system of record.
• Any additional task as assigned by the people leader.
• He/She will work directly with the HSE & Facility Manager and Operation Manager to ensure alignment with the business priorities and strategies including those for HSE.
• He/She will be reporting to HSE & Facility Manager.

Qualifications/Requirements:

• Polytechnic Diploma in Facility Engineering or similar with at least 2 years of experience in Properties/Facilities Maintenance, Fire Safety Manager (FSM) qualification,
• WSH- Workplace Safety and Health Level B (strongly encouraged but notrequired).
• Familiar with HSE Tableau, INTELEX, MAXIMO is will advantage

Job Responsibilities:

Ø Complete maintenance jobs in accordance with the highest standards of efficiency.

Ø Must have rotating equipment service maintenance experience in process industry

Ø Review and assign work to maintenance employees

Ø Maintain schedule compliance and priority

Ø Supply reporting to the maintenance coordinator on repair jobs including consumption of tools, materials, man hours and skills

Ø Develop and execute training plan for maintenance workers

Ø Monitor and manage the maintenance budget, ensuring cost-effective operations and adherence to financial guidelines

Requirements:

Ø Promote communication as well as good relations between the production and the maintenance departments

Ø Must have possession of relevant technical knowledge

Ø Must possess clerical ability

Ø Candidate must have at least a NTC or Diploma degree.

Ø Minimum 5+ years of experience in related operations

Job Description:

• Integrate and install auto-mechanical/ electrical/ electronic subcomponents /robot/equipment according to process instructions
• Carry out calibration/acceptance test on sub-systems/robot/vehicle/equipment according to process instructions
• Perform functional checks, setting, testing, fault finding and failure analysis
• Service and troubleshoot of Auto-mechanical / Electronics / Electrical control system

Job Requirements:

• Minimum qualification of NITEC in Mechatronics/Electronics/ Electrical/Robotics & Smart Systems or related discipline
• Candidates with 2 to 3 years’ experience in automotive or relevant industrial experience will also be considered
• Perform troubleshooting and fault analysis on Hydraulic/Pneumatic/ Electronics/ Electrical systems
• Basic understanding of electrical/electronic circuit
• Able to perform analytical and diagnostics with measuring equipment like Digital Meter & Scope
• Advantage with class 3 driving licence
• Willing to travel overseas

JOB PURPOSE

As a member of the production shift team, the job holder will operate and monitor the chemical production activities in the plant, ensuring that the product is manufactured within set production schedule and to the required standards of quality in a safe, efficient, responsible and cost effective manner.

REPORTING RELATIONSHIP

The job holder will report to the Shift Supervisor and his deputy working alongside with other chemical technicians.

KEY ACCOUNTABILITIES

1. Operate the different streams of the plant for their specific processes. Each of these processes comprises the following activities.

• Handover checks computerised and/or manual.
• Obtaining, following and completing process related documentation.
• Pre and post batch cleaning of vessels and lines.
• Pre batch checks.
• Charging vessels either manually or via a pump.
• Post charging checks and taking corrective action where necessary.
• Adjusting and monitoring process conditions as required to start the process.
• Monitoring process; both with computer and manually observing temperature, pressure, flow, pH, volume, colour, moisture content and adjusting the parameters accordingly.
• Carrying out routine sampling and Bulk packing and testing of samples as required.
• Recognise end point of the reaction and altering process parameter to stop reaction.
• Transferring product to the next stage.

1. Comply with HSE and quality policies and defined procedures. Bring out unsafe conditions and acts / procedures for correction.
2. Record all operational and analytical data on the appropriate documents and inform the Shift Supervisor of any process abnormalities.
3. Maintain product separation and accurate labelling of all documents, bags and vessels at all times.
4. Carry out routine checks and scheduled cleaning procedures including cleanrooms.
5. Request and collect raw materials and consumables, observe clean areas procedures, monitor raw materials stock and notify Shift Supervisor for any abnormalities.
6. Notify Shift Supervisor of requirements for maintenance. Prepare equipment before maintenance work e.g. depressurizing, cleaning of lines and equipment, de-energizing, LOTO etc.
7. Perform basic maintenance of equipment using tools such as TPM.
8. At the Shift Supervisor's request, to carry out on-the-job training of other Chemical Technicians, incorporating cGMP and safety procedures.
9. To observe cGMP and Health & Safety rules and regulations at work at all times in accordance with Company set standards.
10. To be aware of the potentially hazardous nature of the chemicals in the area and must take the appropriate precautions when using them.
11. Maintain housekeeping of the plant and provide suggestions for improvements.
12. To operate ancillary facilities e.g. water system, tank farms, solvent recovery etc.

JOB REQUIREMENTS

• Minimum NITEC or Higher NITEC in Chemical Processing or related
• Must be prepared to work shifts.
• Must be resourceful, conscientious, dedicated and a good team player.
• Adequate formal and on-the-job training on the chemical processes will be given.

TECHNICAL SKILLS

• Use of process control systems for operation of plant equipment
• Operation of manufacturing equipment such reactors, centrifuges, filters, dryers etc
• Cleaning and maintaining cleanliness and condition of cleanroom facility
• Implement cleaning and changeover of equipment
• Apply GMP in manufacturing processes
• Manage materials and materials flow according to established SOP and BRS
• Able to identify and manage hazards that may occur within biopharmaceutical plant
• Verify that routine manufacturing processes are consistently within a state of control
• In-process analysis to verify that results are within targets
• Able to perform line tracing using P&ID
• Able to do simple mechanical task such as filter changes.

GENERIC SKILLS

• Communicate information with others to respond to general inquiries and obtain specific information
• Digital literacy: Able to use computer software to perform basic functions
• Interpersonal skills to be able to work with the team and with other departments
• Basic problem solving to solve simple problem

Responsibilities

1. Operate the process to meet the conditions specified in manuals/instructions.
2. Operate the process equipment at site in accordance with operation plan.
3. To maintain and make sure that all equipment are in good working condition.
4. To prepare chemical solutions according to SOP and guideline.
5. Assist in coordination of daily maintenance, and participating in maintenance activities and shutdown/start-up of sections.
6. To perform 5S and ensure a secure, clean and safe work area.

Requirements

• Minimum ITE or Diploma holder; Engineering or Chemistry field preferred
• Experience in chemical engineering and analytical procedures preferred
• Good working attitude; responsible and initiative
• Possess the "hands-on" attitude

Remuneration Package

• Basic: S$1,800 – S$2,500
• Working hours: 5.5 work week (Mon-Fri: 8am – 5pm; Sat: 8am – 12pm)
• Entitled to overtime.
• Company Transport is provided.

• 5 days, Jurong West, Transport provided
• $2400 - $2800, allowances
• AWS, performance bonus, medical/dental benefits
• Good leadership skills
• Warehouse environment

Description

• Supervise maintenance and production workers, as well as contract workers
• Troubleshoot production machines and electrical systems in the company
• Operate production machine

Requirements:

• Minimum ITE in Electrical and Mechanical Engineering
• Minimum 1-3 years experience in electrical and mechanical
• A hands-on person
• Independent, fast learner with a positive attitude and able to multi-task

Interested applicants, please send your applicants to [email protected]

Primary Responsibilities:

1. To conduct final sample preparation in final sampling room.
2. To conduct laboratory analysis and reporting
3. To assist chemist in technical development project
4. To maintain the inventory of all laboratory facilities/ equipment
5. To check, record and report on the inventory of all laboratory supplies
6. To carry out calibration and maintenance of all laboratory equipment as per schedule or instructed
7. To ensure good housekeeping in the laboratory
8. To follow the existing system and documentation as per the procedures
9. To update the relevant records

Requirements:

• At least ITE or Diploma in Chemistry/Chemical Process Technology/Material Science or equivalent
• Working experience in precious metal/ base metal is an added advantage.
• Good analytical abilities and communication skills

Remuneration:

• Salary: $2,000 - $2,400
• Working hours: Monday to Friday (8am – 5.45pm)
• Company transport provided
• Entitled to overtime claim

We are currently recruiting a Veterinarian who will join the animal facility at Lee Kong Chian School of Medicine (LKCMedicine). The Veterinarian will help address all the needs for veterinary medical services and IACUC requirements at all NTU animal facilities licensed by AVS. As an AAALAC accredited facility, the Veterinarian will play a critical role in ensuring that the accreditation status is maintained. The Veterinarian will be responsible for carrying out all aspects of the veterinary requirements, from treating the animals, assessing animal health reports of incoming shipments, performing health monitoring of animals, implementing preventive measures to disease outbreaks, so that the welfare and ethical treatment of animal are addressed and maintained according to the guidelines thereby enhancing the research work in the University.

Responsibilities:

Prevention, Diagnosis, Control and Treatment of Disease

• Assessment of sick and dead animals, including necropsy of dead animals if needed.
• Prescribing and administration of treatment/euthanasia of sick animals.
• Implementing and maintaining the sentinel animal health monitoring system.
• Health review and approval of all incoming and outgoing animal.
• Addressing nutritional requirements when required.

Pain and distress- prevention, minimization and alleviation

• Advising staff and researchers about the use of analgesics and anaesthetics in animals, including dispensing of above-mentioned drugs/agents. Keeping records of all drugs provided to researchers/staff.
• Procurement of drugs or agents used in veterinary medicine. Keeping records of veterinary drugs provided to staff and researchers. Maintain controlled drug records.
• Ensure that all welfare concerns regarding the use of animals within the facility meets regulatory guidelines. Pain and distress must be minimised or eliminated when possible.

Assisting the researchers on procedures and general equipment usage

• Train the researchers regarding the safe use of euthanasia chambers and anaesthetic equipment. Ensuring that all anaesthetic equipment are maintained and calibrated on a regular basis.
• Ensure that all physical means of euthanasia are carried out appropriately without any welfare concerns.
• Advise the researchers and staff on the approved surgical methodologies, fluid administration and withdrawal volumes and breeding colony maintenance.
• Conduct Responsible Care and Use of Animals (RCULAC) and Responsible Care and Use of Fish (RCUF) Practical courses for new users.
• Review RCULAC online theory course to ensure that information provided is accurate and up to date.

IACUC Responsibilities

• To address all regulatory requirements of a veterinarian as defined by the NACLAR Guidelines. This includes sitting on the IACUC committee and reviewing animal use protocol, facility and program evaluations, monitoring of IACUC compliance and advising researchers regarding sick/moribund animal, humane endpoints and treatment plans/euthanasia.
• Work with the IACUC secretariat on addressing non-compliance with IACUC protocols.
• Implement researcher/staff training sessions to enhance ongoing training and development of researchers and facility staff.

Requirements:

• A degree in veterinary medicine and licensed by AVS to practice veterinary medicine in Singapore.
• Preferably with at least 3 years experience in laboratory animals veterinary care in research setting in academia.
• Restricted license veterinarian or veterinarian who are eligible for restricted licenses and with at least 5 years working experience in laboratory animals may be considered.

This is a 2 years contract appointment.

General Overview

This position is part of the Production team performing LNG Terminal operations of loading and unloading of LNG from vessels and re-gasification process of LNG for the natural gas pipeline network supply. The position requires the incumbent to perform fieldwork and operate the DCS. The incumbent will work closely with the marine, technical and maintenance team to perform the operations.

Roles and ResponsibilIties

The primary duties are listed as follows:

• Perform routine field inspections on equipment operating conditions to ensure safe operating limits.
• Perform unloading of chemicals/utilities into receiving tanks.
• Perform jetty operations such as berthing in of vessels, operating marine loading arms and undertake Loading Master role.
• Operate DCS to monitor and control the overall terminal process within the design parameters and to meet customers’ gas nomination requests.
• Maintain comprehensive unit logs with proper data of all activities occurring in the shift and to ensure proper changeover of shift including any follow-up activities requirement.
• Support other production activities in relation to other businesses and services such as vessel cool down, cold energy transfer, LNG Truck Loading etc.
• Perform troubleshooting on equipment and processes when necessary.
• Take corrective action to ensure unit and equipment are operated under safe and optimum conditions. Generate work orders for maintenance work on equipment when necessary.
• Secure and prepare equipment and work sites for maintenance work according to Safe Operating Procedures requirements such as equipment lock-out and tag-out, low tension electrical de-energization etc.
• Perform basic maintenance such as strainer cleaning, flange make up, gas cylinder replacement etc.
• Replenish process chemicals / additives and trigger re-stock when necessary.
• Review and issue permit to work after all safety checklist is completed and ready for maintenance activities.
• Conduct periodic fugitive emission leak detection (hydrocarbon) and execute immediate measures to minimize or eliminate leaks.
• Supervise contractors who are executing the approved works according to the established permit to work system.
• Undertake project related role when assigned; rotation between shift and day work.

The incumbent shall be part of the company’s Emergency Response Team (CERT) and perform any assigned roles and responsibilities such as but not limited to:

• Respond to terminal emergency situations as a first aid specialist or fire fighter or any other assigned roles.
• Participate in prevention and combat of hazardous situations such as loss of primary containment, oil spills and other forms of pollution and situations dangerous to life and property.
• Perform periodic safety check on work sites to ensure safety compliance enforcement such as but not limited to taking periodic gas test for confined space work.
• Perform routine safety check on all safety equipment such as safety showers, eye wash, SCBA (Self-Contained Breathing Apparatus), firefighting equipment etc. to ensure readiness and availability.

Work Experience

• Candidate must have at least 3 years’ experience in oil, petrochemical and refinery plant, utilities and cryogenic processes.
• Previous operations experience of LNG facilities is preferred but transferable skills from other hydrocarbon process or cryogenic product (e.g. LPG) loading and unloading will also be considered.
• Preferably with knowledge of plant instrumentation and control systems and DCS.
• Practical working knowledge of mechanical equipment, heat transfer equipment cryogenic equipment, centrifugal and reciprocating compressors, LNG tanks, fired equipment and flare systems.
• Experience in mechanical systems and process plants desired, knowledge of cryogenics and aspects of the natural gas industry is preferred.
• Experience in process plant safety (e.g. confined space, lock-out and tag-out, working at height, gas testing etc.) and permit to work issuing is preferred.
• Experience in plant commissioning and start-up is preferred.
• In addition, the successful candidate should possess the following personal attributes:

1. Work well in a team and with good listening skill
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments.

Education

• NITEC certificate in Mechanical, Electrical or Chemical Engineering
• Candidates with Diploma in Mechanical, Electrical or Chemical Engineering will have an advantage.

Work Location: 2 bus stop away from Joo Koon MRT station

with In-house canteen

Job Description:

~ Operating machine and to produce the required output within the quality control specification.

~ Ensure the machine is running smoothly and efficiently

~ To perform troubleshooting and resolve technical issues to minimize the disruption to production.

~ To perform trouble shooting related to defective and quality issue products timely and effectively.

~ Perform routine service and preventive maintenance of machine according to the schedule sets. Ensure documentation are correctly updated.

~ Able to perform change model (change size / change tooling) independently and ensure the products able to meet the quality control specification.

~ Monitor the production wastage and take remedial action when necessary.

~ To maintain the work area clean, safe and orderly

~ Maintain an effective communication between shifts

~ Assist superior in spare part management

~ Provide and assist the technical improvement project support when necessary

Requirements:

~ Willing to work 12 hours shift (rotating schedule), 6:45 to 6:45

~ NITEC / Diploma or equivalent with years of related experience

~ Able to work independently and team player

~ An advantage able to lead team.

Job Description

Job Responsibilities:

• Carry out regular preventive maintenance, troubleshoot & repair factory equipment
• Maintains current records on equipment manufacturers’ technical notices, upgrades and safety issue
• Perform routine checking, housekeeping and maintenance of tools and kits for equipment
• Tracks and compiles report on equipment performance in assigned shift and area
• Recommends and implements alternative source for spare, modification if equipment or improvement in procedure to save cost
• Keep work area clean and tidy
• Other ad-hoc duties assigned

Job Requirements:

• Candidate must possess at least a NTC Electronics/Diploma in Electrical Engineering
• At least 2 year(s) of working experience in the related field is required for this position

Assist and Support the site supervisor and construction manager in all aspects of works, including:

o Reviewing electrical and signalling system drawings and specifications

o Planning and scheduling work

o Assigning work to sub-contractors and overseeing their work.

Major work is power/control/Signal/FO cabling, equipment installation, testing and commissioning associated with LRT project.

o Ensuring compliance with standards, codes, and safety regulations.

o Troubleshooting electrical problems.

o Developing reports and records

o Maintaining accurate records and documentation.

· Perform routine tasks, such as:

o Conducting pre-task Toolbox Meeting/ Safety briefings.

o Issuing work permits.

o Arranging LOTO

o Assisting QA/QC works

o Assisting testing and commissioning works

o Arranging materials and equipment.

o Arranging special tools etc

· Communicating effectively with the electrical site supervisor, project manager, other subcontractors, and inspectors.

· Communicating with various stake holders e.g. other contractors (System Wide Contractors), SBST, LTA.

· Any other ad-hoc works assigned by project manager and construction manager.

Requirements

· Diploma or ITE in Electrical and Electronics

Responsibilities:

- To perform job assignments by selecting, using and maintaining various service tools correctly.

- To perform installation of electrical switches, sensors, transducers, transmitters, current transformers, alternator components, control panels, etc.

- To perform installation of engine wiring as accordance with the drawings provided.

- To disassemble and assemble engine components i.e. oil pump, water pump and cylinder head, etc.

- To perform engine valve lash adjustment.

- To assist and perform mechanical works i.e. installation of radiator assembly, couplings, engines, alternators, gearbox, piping, hoses, etc.

- To assist and perform alignment works for radiator assembly, engine and alternator installation.

- To prepare generators for load test.

- To perform safety devices test and load test including the recording of the required parameter readings.

- To perform ET tool connection onto engine to view diagnostic codes and events and file date.

- To perform troubleshooting on engines and generators when problems arises.

- Knowledge of Hydraulic Staring System, Marine Gearbox, AC Power Alternator, alignment, control panel and testing will of advantage.

- To perform general servicing on engines and alternators.

- IT knowledge will be of advantage.

- Programmable Logic Control knowledge will be of advantage.

Requirements:

- Possess an ITE or equivalent.

- Minimum 5 years of relevant hands-on experience.

- Electrical hands-on experience is a must.

Job Description:

1. Handle and follow up on all day-to-day sales matters.

2. Liaise with staff from other departments, customers and suppliers.

3. Prepare all sales related documents, include government registration, financing for customers.

4. Logistic arrangement for import and export shipments.

5. Update Stock and Reservations.

Requirements:

1. Diploma or equivalent

2. Meticulous, independent and self-motivated

3. Good personality and work attitude

4. 3-5 years working experience

5. Knowledge or experience in logistic/supply chain

6. Computer literate: MS Office and SAP ERP

1. Person-in-charge of an in-house trailer repair/ maintenance workshop
2. Guide supervisor and staff on the allocation of work and deployment of staff
3. Verify repair quotations from vendors on prime movers and company’s vehicles
4. Conduct inspections on vendors sites to ensure repairs works are completed timely and meet our satisfaction expectations
5. Ensure staff is equipped with relevant skills, knowledge and certifications to perform necessary work.
6. Ensure timely completion of work as per target set by management.
7. Work closely with Transport department to ensure trailers and prime movers are in time for LTA inspection
8. Work closely with Procurement department to control inventory availability and cost.
9. Prepare statistics and reports to review performance and make recommendations on operational and procedural enhancement / improvement
10. Attend to drivers’ feedback / call and recommend next course of action
11. Ensure supply of safety kits/ PPE to staff and ensure adherence to safety regulations and safe work practices
12. Ensure availability of tools, material, spare parts and proper upkeep of inventory and assets
13. Ensure cleanliness of work premises and ensure good housekeeping for a cleaner workplace.
14. Ensure quality through supervision of work and stage inspections
15. Verification of timely and proper opening and closing of job cards
16. Adhere to statutory/ company’s safety and health policies, procedures and regulations
17. Assist HOD and Management in any work assigned
18. Any other duties and responsibilities assigned from time to time

Requirements:

1. Diploma holder in mechanical engineering or related field
2. Possess Class 3 driving licence.
3. At least 5 years of technical experience in automotive industry, preferably in heavy/ commercial vehicles
4. Strong technical competence and experience in prime mover and trailer
5. Good interpersonal skills and goal oriented
6. Able to handle stress and work within a tight schedule

Others Information:

1. Mon – Fri (8.30am – 5.30pm); Sat (8.30am – 12.30pm)
2. Daily meal subsidy
3. Medical, dental & insurance benefits
4. Company Transport: 2 ways from Jurong East

Job Description

-Carry out cable sizing calculations

-Prepare cable schedules

-Prepare interconnection diagrams

-Carry out lighting illumination calculations

-Prepare lighting and small power layout drawings

-Carry out cable tray routing drawings

-Prepare electrical & Instrumentation detail drawings

-Prepare electrical & Instrument MTO's

-Prepare earthing layout drawings

-Prepare material requisitions for bulk materials

-Prepare lightning protection system layout drawings

-Create detailed schematics, wiring diagrams, and control panel layouts.

-Site checking and verification

-Troubleshoot LV and MV faults

-Troubleshooting control panel wirings

-Troubleshoot PLC panel faults and instrumentations

-Troubleshoot LV and MV motor and transformer faults

-Troubleshoot and resolve issues related to control systems, ensuring minimal downtime and optimal performance

-Able to design new control panel, cabling drives for new project

-Able to do BOQ and design for new tenders

-Able to understand the basics of any system in industrial field at a glimpse

-Able to understand electrical, mechanical, civil and HVAC drawings

-Provide ongoing maintenance support for electrical and instrumentation systems.

-Ensure all electrical and instrumentation work complies with relevant safety standards and regulations

Qualification & Requirement

-Degree/Diploma in Engineering (Electrical/Power/Instrumentation & Control)

-Minimum 0-2 year of Singapore working experience

-Strong communication skills

-Good interpersonal skill and able to work as a team

-Possess strong knowledge in Electrical Standards, electrical power network calculation and able to read P&ID

-Proficiency in computer knowledge of MS Word, Excel, AutoCAD, etc

-Basic English communication skills

-Electrical Engineer with hands-on skills

We are an established company providing specialist hydraulics services to clients in the offshore, marine, oil & gas sectors, in Singapore and Overseas.

Our comprehensive range of products and services caters to all Hydraulic, Pneumatic, Electrical, and Mechanical needs in the Marine, Offshore Deck, Industrial, Civil Construction, Healthcare & Food Industries.

Some of the brands / clients we partner with include:

• Vestdavit Boat Handling Systems - Bergen, Norway
• Stanley Hydraulic Underwater Tools - USA
• T2 Alloy (Tungum Tubing) - UK
• Kinematics Manufacturing Incorporated For Winches - USA
• Repair & Service Works For Heila Cranes - Italy / Netherlands
• Vehicles Pto - Bezares, SPAIN
• Repair & Service For Rig Jacking System – Hydraquip Custom Systems Inc , USA
• Ibercisa Winches, SPAIN

Responsibilities:

• Perform mechanical overhaul and servicing of hydraulic machinery
• Participate in Testing and commissioning works
• Ensure workshop tools, and equipment are well-maintained

Requirements:

• Minimum 2 years’ relevant experience in mechanical servicing of marine offshore deck hydraulic equipment
• Positive work attitude
• Team player

We thank you for your interest.

We regret that only shortlisted applicants will be notified.

Position is open to Singaporeans only.

About WKS Welding Products Pte Ltd

WKS WELDING PRODUCTS PTE LTD was established in 2006 as a subsidiary of WKS INDUSTRIAL GAS PTE LTD to complement and provide a more comprehensive scope of products and services to our customers.

Today, we have become one of Singapore's leading welding equipment suppliers. We are proud to be distributors of quality brands such as Lincoln Electric, Gentec, Oxford Alloys, Zeus, Golden Weld, Jasic, Atlantic, 3M Speedglas, Koike Sanso, Pegatec and have a wide range of welding equipment and consumables to suit your different needs.

Job Responsibilities:

• Troubleshooting and repair, service and maintenance of electrical equipment like welding machines.
• Troubleshooting and repair, service and maintenance of gas equipment.
• Provide advice to customers and work along sales team to conduct product demonstrations and commissioning.
• Perform general maintenance for production plant and equipment
• Ensure proper upkeeping of working environment
• Able to work extended hours when required

Requirements:

• Preferably with 'N' or 'O' level, Nitec and Diploma (Electrical / Electronics or relevant).
• Prior experience will be highly valued
• Good attitude and team player
• Able to perform some basic welding will be advantageous
• Possess Class 3 driving licence

Employer questions

Your application will include the following questions:

• What's your expected monthly basic salary?
• Which of the following statements best describes your right to work in Singapore?
• How many years' experience do you have as a Service Technician?

Roles & Responsibilities

•Inspection of project sites

•Coordinate, manage, and supervise all the instrument installation and monitoring works.

•Liaise and coordinate with contractor for installation and monitoring issues

•Attending site progress meetings, preparation of minutes and coordination with clients.

•Process and interpret monitoring readings

•Coordinate with construction team to minimise obstruction and damage of the monitoring instruments

•Supervise and quality control in instrumentation works

•Any other duties as assigned by Manager.

Requirements

•Relevant education background in Civil Engineering / Geotechnical / Geology

•Min 3 years’ experience in instrumentation and monitoring works

•Experience in LTA projects

•Senior position will be considered with relevant experience.

You may send your resume / CV to email address directly: [email protected]

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Lead all aspects of electrical controls, power and instrumentation systems related to the equipment and machinery.
• Be responsible for the design and technical support of all hardware, software, instrumentation and controls elements as part of an integrated system.
• Identify, create and support project documentation including, but not limited to HMI, PLC programing, power distribution, control/signal wiring, wireless technology, cabinet/panel design, BOM and layout drawings to corporate standards.
• Develop instrumentation specifications as related to process requirements and control schemes.
• Support engineering, project management and deployment groups to identify and resolve technical issues.
• Provide technical direction as required.
• Work with outside vendors and purchasing to select and establish equipment component specifications, material take-offs, requisitions and vendor orders while coordinating cost control, project schedule and manufacturing efforts.
• Have the ability to work independently and in an interdisciplinary team environment to perform all duties in a professional and timely manner.
• Must be able to work through problems from a technical and practical prospective, while maintaining cost controls.
• Have good organization and communication skills.
• Have the ability to work independently and in an interdisciplinary team environment to perform all duties in a professional and timely manner.
• Must be able to work through problems from a technical and practical prospective, while maintaining cost controls. Ø Prepare, check, and issue instrument schedule and list, including document index, instrument index, I/O list, cable schedule, interconnection wiring drawings, termination drawings, junction box schedule, instrument hookup drawings, and material take off.
• Check and issue block diagrams, control/rack room layout, cable route, instrument location plan, DCS, SIS, BMS systems loop drawings, instrument hook-up details, and instrument sizing and calculation.
• Prepare and issue instrument data sheets for control valves, on-off valves, PCVs, MOVs, PSVs, and other field instruments. Ø Guide designers to prepare drawings.
• Coordinate requirements with other disciplines.
• Work with Project Managers and other team members

Skills & Experiences required:

• Bachelor’s degree in engineering or related field with 10+ years of experience in system controls, instrumentation and wiring.
• Wastewater, Chemical Processing and/or Oil & Gas systems experience is preferred.
• Experience designing PLC & control panels, PLC and HMI programming is preferred.

Must possess in depth knowledge of Automation programmable controller hardware, automation software and AC Drives

Knowledge of Microsoft Office and AutoCad

Reporting to the Manager of Engineering, the Technician will provide maintenance and engineering support in the manufacturing plant.

Our Manufacturing Operations teams are the people that make our products. We work in the manufacturing plants with a “Safety First, Quality Always” mindset striving for continuous improvement. We work in the local plant connected to our global manufacturing network to ensure the highest quality of raw materials, intermediates, and finished products.

WHAT YOU WILL DO

Your responsibilities will include but are not limited to:

• Performs scheduled calibrations and preventive maintenance on all types of industrial instruments and electrical devices and mechanical equipment.
• Executes work request from process plants for equipment, instruments and electrical breakdown.
• Operates and maintenance of utilities and facilities.
• Performs modifications, fabrication, fittings, and installation for minor projects.
• Performs equipment/system testing, commissioning and/or qualification (IQ, OQ, PQ).
• Performs basic trouble shooting of the PLC, BMS, EMS and FAs system.

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Min NITEC Diploma in Mechanical, Mechatronics, Electrical or instrumentation and control engineering
• Min 2 years' experience in maintenance field preferably from oil and gas or semiconductor industries
• PUB electrician license will be an advantage

This is a career conversion program under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• Singaporeans/Singapore PRs only
• PMETs/Mid-Careerist with more than 2 years working experience
• Open to two years contract
• 12 hours rotating shift (day/night) including Sat/Sun. Shift allowance will be provided
• Work location Tuas (shuttle bus provided)

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Pharmaceutical Manufacturing.
• A state-of-the-art facility that delivers solution to its customers world-wide
• Highly engaging team that aims to innovate the future

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Roles & Responsibilities:

• Perform field service activities of mechanical engineering design and services related to fire & gas alarm
• Perform site survey, site installation & commissioning, and field services of VOC Analyzer, Autosampler, IP CCTV, Biometric System, Intrusion Alarm System etc.
• Provide effective Onsite/Remote Technical Support to diagnose and rectify technical issues.
• Respond and resolve customer issues in an accurate and timely manner.

Requirements:

• Minimum 2 years of relevant work experience
• Must be able to attend to field service jobs at Construction sites in Singapore
• Good IT and CCTV knowledge
• Good Mechanical Design knowledge for fire & gas system
• Advantage to possess Class 3 driving license

Office hour:

• Mon-Friday (8:30am to 5:30pm)
• Saturday (8:30am to 12:30pm)

Job Summary:

· Salary details: $1,800 to $2,400

· Working Days and Hours:

2 days morning 2 days night 2 days off

o Morning Shift – 7.40am to 5.35pm

o Night Shift - 4.55pm – 1.45am

Job Location: 21 Loyang Cresent, Singapore 508985 (Safran Landing Systems office)

Transport: Company transport from specific pick-up location (both way)

Key Company Benefits: Completion Bonus, Medical Benefits

Job Responsibilities:

· Fault isolation to repair and restore System Equipment component to serviceable condition

· Receipt inspection and test of incoming System Equipment component to determine serviceability

· Perform Fault isolation, Repair, Assembly and Testing of System Equipment component in accordance with Component Maintenance Manuals.

· Perform regular checks on equipment and maintain them in good condition.

· Identify areas for improvement and participate in implementing solutions.

· Active participation in lean sigma & continuous improvement initiatives

· Active participation in 5S program

· Participate actively in contributing to HSE development and improvement.

· Any other duties as assigned.

Requirements

· NITEC or Diploma in Electrical/Electronic/Mechanical/Aerospace engineering or related disciplines

· Minimum 3 years in-depth knowledge in fault isolation to repair and restore component to serviceable condition [e.g. Brake Manifold Assembly, Servo Valve, Hydraulic Control Unit, Park Brake Selector Valve, etc.]

· Experience operating the Hydraulic Test Bench is advantages

· Manage work schedule and working to the production plan to meet customers’ expected datelines.

· Experience in an aviation environment or equivalent is advantages

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)