Total 92 electronic engineer job vacancies in Others category in singapore, North East

Under limited supervision, the technician will install, service, and repair electronic equipment on board ships. You will test, adjust, and troubleshoot components, PCBs, sub-assemblies, and antennas. Load, update, and modify software. Use your knowledge of electronic theory and circuitry to address a variety of technical problems. Make intelligent use of complex schematics, and manuals to accurately achieve assignments. Upon completing the assignment, you will compose a detailed service report.

most Original Equipment Manufacturers in the Marine/ Oil & Gas industry including and not limited to: SPERRY, FEDERAL SIGNAL, SEATEL, SAILOR, FURUNO, JRC, JOTRON,DANELEC, NINGLU, SKIPPER, ORLACO,HIKVISION,AXIS, PELCO, etc

Description

• Expertise in configuring, customizing, and integrating payment engines such as Global PayPlus (GPP), Finastra, and familiarity with API-based payment solutions.
• Synthesize intricate high-level requirements into actionable, product-specific deliverables. Drive gap analysis within payment systems, particularly for Global Pay Plus (GPP) engines, and leverage technical depth to integrate API-driven solutions for seamless global deployments.
• Navigate intricate vendor relationships, guiding them through RFPs and the selection of payment solutions, particularly for advanced capabilities like Virtual Account Management.
• Oversee sanctions compliance and payment risk mitigation strategies, ensuring all systems adhere to the most stringent global compliance standards.

Description

• Expertise in configuring, customizing, and integrating payment engines such as Global PayPlus (GPP), Finastra, and familiarity with API-based payment solutions.
• Synthesize intricate high-level requirements into actionable, product-specific deliverables. Drive gap analysis within payment systems, particularly for Global Pay Plus (GPP) engines, and leverage technical depth to integrate API-driven solutions for seamless global deployments.
• Navigate intricate vendor relationships, guiding them through RFPs and the selection of payment solutions, particularly for advanced capabilities like Virtual Account Management.
• Oversee sanctions compliance and payment risk mitigation strategies, ensuring all systems adhere to the most stringent global compliance standards.

• Young & energetic

• Committed to teamwork

• PLC programming

• Minimum Diploma or experience in relevant field (e.g., electronics/ electrical)

• Control panel fabrication

• AutoCAD

• Field troubleshooting

• Site survey/coordination

Develop and maintain software applications using C, C++, and Unix/Linux-based environments.

Write efficient, scalable, and well-documented code to optimize system performance.

Troubleshoot, debug, and resolve complex system and application issues.

Collaborate with cross-functional teams to design and implement new features.

Utilize shell scripting and other Unix utilities for automation and system management.

The Mechanical and Electrical (M&E) Engineer is responsible for designing, coordinating, and overseeing the mechanical and electrical systems in construction or industrial projects. This role involves working closely with other engineers, architects, contractors, and project managers to ensure that mechanical and electrical systems are designed and implemented in compliance with relevant standards, are cost-effective, and meet the functional and safety requirements of the project.

1. Design and develop mechanical and electrical systems for projects, including HVAC, lighting, power distribution, and plumbing systems.
2. Collaborate with architects and civil engineers to integrate M&E systems seamlessly into the overall project design.
3. Ensure that all designs comply with local regulations, building codes, and industry standards.
4. Prepare technical specifications, drawings, and plans for mechanical and electrical installations.
5. Oversee the installation of mechanical and electrical systems, ensuring they are completed on time, within budget, and according to specifications.
6. Ensure that installation is carried out safely, adhering to safety standards and risk management protocols.
7. Conduct testing and commissioning of M&E systems to ensure they are fully operational and meet performance standards.
8. Manage the M&E components of the project, including scheduling, budgeting, and coordinating with subcontractors and vendors.
9. Monitor and supervise on-site activities to ensure compliance with M&E specifications and quality standards.
10. Collaborate with project managers and other engineers to ensure efficient project execution.
11. Provide ongoing technical support during and after the construction phase, ensuring the mechanical and electrical systems are functioning efficiently.
12. Troubleshoot and resolve issues related to mechanical and electrical systems.
13. Ensure that preventive maintenance schedules are established and followed.
14. Prepare and maintain accurate records of designs, technical specifications, calculations, and installation activities.
15. Report project progress to senior management, identifying any potential delays or issues and recommending solutions.

Requirement

• A Bachelor’s degree or Diploma in Mechanical Engineering, Electrical Engineering, or a related discipline.
• At least 3-5 years of experience in mechanical and electrical engineering, with a focus on construction, building services, or industrial projects.
• Must have Singapore's experience in HDB projects
• Holding a Professional Engineering (PE) certification or other relevant qualifications in M&E engineering (e.g., CEng, LEED accreditation) is a plus.
• Only Singaporeans and Permanent Resident need apply.

The Mechanical and Electrical (M&E) Engineer is responsible for designing, coordinating, and overseeing the mechanical and electrical systems in construction or industrial projects. This role involves working closely with other engineers, architects, contractors, and project managers to ensure that mechanical and electrical systems are designed and implemented in compliance with relevant standards, are cost-effective, and meet the functional and safety requirements of the project.

1. Design and develop mechanical and electrical systems for projects, including HVAC, lighting, power distribution, and plumbing systems.
2. Collaborate with architects and civil engineers to integrate M&E systems seamlessly into the overall project design.
3. Ensure that all designs comply with local regulations, building codes, and industry standards.
4. Prepare technical specifications, drawings, and plans for mechanical and electrical installations.
5. Oversee the installation of mechanical and electrical systems, ensuring they are completed on time, within budget, and according to specifications.
6. Ensure that installation is carried out safely, adhering to safety standards and risk management protocols.
7. Conduct testing and commissioning of M&E systems to ensure they are fully operational and meet performance standards.
8. Manage the M&E components of the project, including scheduling, budgeting, and coordinating with subcontractors and vendors.
9. Monitor and supervise on-site activities to ensure compliance with M&E specifications and quality standards.
10. Collaborate with project managers and other engineers to ensure efficient project execution.
11. Provide ongoing technical support during and after the construction phase, ensuring the mechanical and electrical systems are functioning efficiently.
12. Troubleshoot and resolve issues related to mechanical and electrical systems.
13. Ensure that preventive maintenance schedules are established and followed.
14. Prepare and maintain accurate records of designs, technical specifications, calculations, and installation activities.
15. Report project progress to senior management, identifying any potential delays or issues and recommending solutions.

Requirement

• A Bachelor’s degree or Diploma in Mechanical Engineering, Electrical Engineering, or a related discipline.
• At least 3-5 years of experience in mechanical and electrical engineering, with a focus on construction, building services, or industrial projects.
• Must have Singapore's experience in HDB projects
• Holding a Professional Engineering (PE) certification or other relevant qualifications in M&E engineering (e.g., CEng, LEED accreditation) is a plus.
• Only Singaporeans and Permanent Resident need apply.

The Mechanical and Electrical (M&E) Engineer is responsible for designing, coordinating, and overseeing the mechanical and electrical systems in construction or industrial projects. This role involves working closely with other engineers, architects, contractors, and project managers to ensure that mechanical and electrical systems are designed and implemented in compliance with relevant standards, are cost-effective, and meet the functional and safety requirements of the project.

1. Design and develop mechanical and electrical systems for projects, including HVAC, lighting, power distribution, and plumbing systems.
2. Collaborate with architects and civil engineers to integrate M&E systems seamlessly into the overall project design.
3. Ensure that all designs comply with local regulations, building codes, and industry standards.
4. Prepare technical specifications, drawings, and plans for mechanical and electrical installations.
5. Oversee the installation of mechanical and electrical systems, ensuring they are completed on time, within budget, and according to specifications.
6. Ensure that installation is carried out safely, adhering to safety standards and risk management protocols.
7. Conduct testing and commissioning of M&E systems to ensure they are fully operational and meet performance standards.
8. Manage the M&E components of the project, including scheduling, budgeting, and coordinating with subcontractors and vendors.
9. Monitor and supervise on-site activities to ensure compliance with M&E specifications and quality standards.
10. Collaborate with project managers and other engineers to ensure efficient project execution.
11. Provide ongoing technical support during and after the construction phase, ensuring the mechanical and electrical systems are functioning efficiently.
12. Troubleshoot and resolve issues related to mechanical and electrical systems.
13. Ensure that preventive maintenance schedules are established and followed.
14. Prepare and maintain accurate records of designs, technical specifications, calculations, and installation activities.
15. Report project progress to senior management, identifying any potential delays or issues and recommending solutions.

Requirement

• A Bachelor’s degree or Diploma in Mechanical Engineering, Electrical Engineering, or a related discipline.
• At least 3-5 years of experience in mechanical and electrical engineering, with a focus on construction, building services, or industrial projects.
• Must have Singapore's experience in HDB projects
• Holding a Professional Engineering (PE) certification or other relevant qualifications in M&E engineering (e.g., CEng, LEED accreditation) is a plus.
• Only Singaporeans and Permanent Resident need apply.

The Mechanical and Electrical (M&E) Engineer is responsible for designing, coordinating, and overseeing the mechanical and electrical systems in construction or industrial projects. This role involves working closely with other engineers, architects, contractors, and project managers to ensure that mechanical and electrical systems are designed and implemented in compliance with relevant standards, are cost-effective, and meet the functional and safety requirements of the project.

1. Design and develop mechanical and electrical systems for projects, including HVAC, lighting, power distribution, and plumbing systems.
2. Collaborate with architects and civil engineers to integrate M&E systems seamlessly into the overall project design.
3. Ensure that all designs comply with local regulations, building codes, and industry standards.
4. Prepare technical specifications, drawings, and plans for mechanical and electrical installations.
5. Oversee the installation of mechanical and electrical systems, ensuring they are completed on time, within budget, and according to specifications.
6. Ensure that installation is carried out safely, adhering to safety standards and risk management protocols.
7. Conduct testing and commissioning of M&E systems to ensure they are fully operational and meet performance standards.
8. Manage the M&E components of the project, including scheduling, budgeting, and coordinating with subcontractors and vendors.
9. Monitor and supervise on-site activities to ensure compliance with M&E specifications and quality standards.
10. Collaborate with project managers and other engineers to ensure efficient project execution.
11. Provide ongoing technical support during and after the construction phase, ensuring the mechanical and electrical systems are functioning efficiently.
12. Troubleshoot and resolve issues related to mechanical and electrical systems.
13. Ensure that preventive maintenance schedules are established and followed.
14. Prepare and maintain accurate records of designs, technical specifications, calculations, and installation activities.
15. Report project progress to senior management, identifying any potential delays or issues and recommending solutions.

Requirement

• A Bachelor’s degree or Diploma in Mechanical Engineering, Electrical Engineering, or a related discipline.
• At least 3-5 years of experience in mechanical and electrical engineering, with a focus on construction, building services, or industrial projects.
• Must have Singapore's experience in HDB projects
• Holding a Professional Engineering (PE) certification or other relevant qualifications in M&E engineering (e.g., CEng, LEED accreditation) is a plus.
• Only Singaporeans and Permanent Resident need apply.

Job Responsibilities:

• Manage and ensure updated documents and drawings are issued to the client and subcontractor
• Monitor the progress and keep track of the project timelines.
• Conduct weekly or monthly meeting with sub-contractors to update progress of work
• Ensure quality of work is achieved and all government and safety regulation are complied.
• Oversee drawing management and control of technical documentation
• Oversee and manage procurement of resources, control material usage on site.
• Organize labor, equipment and material for day to day site activities
• Any other duties assigned

Key Responsibilities

* Design and analyze cabin interior and mechanical components in support of aircraft interior modification projects.

* Develop drawings (e.g. LOPA, installation drawings, production drawings, etc), work instructions, procedures and recommendations.

* Develop engineering substantiation reports (e.g. Weight & Balance, Structural, Flammability reports) and Engineering Authorizations (EAs).

* Coordinate with FAA DERs and DARs, EASA CVEs and/or local civil aviation authorities for any necessary assistance and/or approvals.

* Support interior and mechanical aspects of proposal development, customer and supplier meetings including onsite modification technical support.

* Other duties as assigned.

* Temporary assignment travel of up to 3 months in the US and other countries in Asia is required.

REQUIREMENTS

- Bachelor Degree in Engineering (Aerospace or Mechanical Engineering); Experience in related commercial aircraft field either in cabin interior design or technical services would be an added advantage.

- Able to research and analyze Boeing or Airbus documents (e.g. SRM, IPC, AMM, etc.) as well as Original Equipment Manufacturer (OEM) documents (e.g. Service Bulletins, CMM, etc.).

- Able to create engineering installation and assembly drawings using CATIA V5 or INVENTOR and AutoCAD. The candidate should already understand standard engineering drawing convention such as ASME Y14.5.

- Knowledge of aircraft seating, interior components (e.g. carpets, curtains, galleys, partitions, floor and ceiling structures, etc) and décor materials.

- Knowledge of aircraft structures analysis using both Classical and FEA Methods and ability to use FEA software such as ANSYS/NASTRAN an added advantage.

- Knowledge of FAA CFR 14 Part 25 and equivalent EASA CS Regulations.

- Candidates with at least 3 to 5 years of relevant experience will be considered.

Note: Certain AAR job assignments or facilities may require proof of US Citizenship and the ability to qualify for, and maintain, applicable US Defense Security Service Clearances.

Please email your resume to [email protected] or send it to 7 Changi Business Park Vista, #03-01 SooKee HQ, Singapore 486042 and attention it to the Managing Director of AAR Engineering Services – Asia.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

Job Description & Requirements

• Collect and analyse air samples from indoor and outdoor environments, or collect and study multiple types of sources at multiple locations.
• Test samples that have been previously collected in a laboratory environment using specialized equipment and procedures.
• Set up, calibrate, stock and utilize laboratory equipment and consumables as and when required.
• Maintain regular calibration of sampling and/or laboratory equipment.
• Record accurate sampling observations and data to provide to management
• Work independently with minimal supervision or closely with a team of individuals across various disciplines or seniority levels.
• Keep detailed data reports of all sampling information collected.
• Thoroughly understand various sampling methods and how different methods can obtain different results.
• Any other duties as assigned by Supervisor
• Possess Class 3 Driving License (not mandatory)

Requirements:

• Higher NITEC, Diploma or Degree in Environmental Science, Facilities Management, Chemical Engineering or related qualifications
• Environmental engineering, Lab Environment, Environmental Science, Analyzing Information, Equipment Maintenance
• Attention to Detail, Research Skills, Reporting Research Results, Environmental Law, Site Development, Sales, technical reporting and consultancy.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

• Strong proficiency in C and C++ programming languages with a minimum of 1-2 years of experience.
• Experience in software design patterns, data structures, and algorithms.
• Familiarity with Linux/Unix operating systems and development environments.
• Ability to work with version control systems such as Git.
• Experience with multi-threaded programming and concurrent systems.
• Strong problem-solving skills and the ability to analyze complex software issues.
• Good understanding of network programming and protocols is a plus.
• Excellent communication and teamwork skills.

FRESH GRADUATES EAGER TO WORK WITH C AND C++ TECHNOLOGIES ARE ENCOURAGED TO APPLY.

Electrical Engineer Responsibilities:

• Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.

• Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

• Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.

• Ensuring that installation and operations conform to standards and customer requirements by preparing electrical systems specifications, technical drawings, or topographical maps.

• Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

• Ensuring compliance with specifications, codes, or customer requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

• Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.

• Preparing specifications for purchases of electrical equipment and materials.

• Supervising or training project team members.

• Estimating material, labor, or construction costs for budget preparation.

• Maintaining electrical equipment.

• Working with a variety of technicians.

Electrical Engineer Requirements:

• Bachelor's degree in electrical engineering degree from an accredited school.

• Licensed as a professional engineer.

• Experience in using or a desire to learn the required software.

• Knowledge of applicable codes related to electronic engineering.

• Proficient in design and calculation software.

Electronics Engineer Responsibilities:

• Designing, inspecting, testing, and updating electronic systems, components, equipment, and software.

• Liaising with engineers, other professionals, as well as clients to ensure quality projects are completed to specifications.

• Ensuring all equipment and products meet health and safety regulations.

• Observing existing processes and making recommendations for improvement.

• Developing effective maintenance, testing, and quality control procedures.

• Showing initiative and keeping up with advancements in Electronics.

• Representing the company at conferences and delivering presentations if required.

• Monitoring processes, systems, and staff, and punctually identifying problems.

• Establishing relationships with staff, vendors, suppliers, and other professionals in the field.

• Writing specifications, instructions, reports, and handling other required administrative duties.

Electronics Engineer Requirements:

• Bachelor's degree in engineering or similar.

• Master's degree preferable.

• A relevant license may be required.

• Practical experience with design software.

• Experience in design recommended.

• Excellent problem-solving and troubleshooting skills.

• Strong written, verbal, and telephonic communication skills.

• Excellent research and interpersonal skills.

• Strong analytical skills.

• Willingness to work overtime if required.

This position is a contract position from Jan 2025 to July 2025 and is responsible for supporting the sales team in the preparation of sales quotations and tender preparations, and other sales support activities.

Responsibilities include supporting the project administrator when required, with project documentation and other project activities

Job Responsibilities

• Supporting Sales Team on preparing Sales quotations, Sales/Maintenace tender, catalogues and other document required for submissions, etc.
• The Sales Administrator is responsible for the following specific responsibilities:
  - To support all the sales functions of the department.
  - Regularly review tender portals, industry publications, and network contacts for upcoming opportunities relevant to our business.
  - Registration of site/tender brief and provide timely feedback to Sales Personnel of any change of schedule.
  - Evaluate, document, record, highlight, and track/monitor critical/important clauses and deadlines for tender and quotation submission including entering key details such as submission dates, requirements and scope of work for each opportunity.
  - Assist the sales team promptly and efficiently with the timely submission of comprehensive tender bids and quotations.
  - Keeping standard tender and quotation submission documents for reference and easy retrieval including maintaining the formal for tender and quotation submission documents for quick access and reference.
  - Organize the storage of all sales inquiries and quotations in a tidy and easily retrievable system. This include managing the filling of all related sales inquiries and quotations in SharePoint to be in a traceable and organised manner.
  - Generate monthly sales reports.

Job Requirements

• Diploma in Administration or its equivalent
• With 2 to 3 years’ relevant experience in related industry
• Excellent organization skills and ability to multi-task
• Meticulous and pay great attention to detail
• Good communication and interpersonal skills
• A team player and work independently with minimum supervision
• Ability to interact and work with people of all levels
• Ability to work under pressure and meet tight deadlines.
• Proficient in MS Project and MS Office software

If you are keen to be part of our team and possess the above pre-requisites, kindly submit your detailed resume stating your current & expected salary via the button "APPLY NOW" to:

HR Department

Securitas Electronic Security Singapore Pte Ltd

To know more about us, please visit us at www.securitas-singapore.com.

(*we regret that only shortlisted candidates will be notified.)

Marine Engineer Responsibilities:

• Conducting research and tests to inform the design and construction of marine vehicles and equipment.

• Preparing technical reports such as research, systems diagnostics, and design analysis documentation.

• Presenting layout and engineering designs to clients and team members for analysis and feedback.

• Supervising all aspects of the design process for structural, mechanical, and electrical systems.

• Overseeing the construction of marine vessels and equipment to ensure their quality and integrity.

• Performing quality control inspections and tests on all systems and equipment and installing upgrades, as needed.

• Ensuring adherence to safety precautions and project timelines.

• Training and supervising engineering teams including designers, mechanics, and construction staff.

• Performing maintenance on marine vehicles and equipment.

• Investigating and diagnosing technical issues and implementing effective repairs.

Marine Engineer Requirements:

• Bachelor's degree in marine engineering or similar.

• Relevant USCG engineer license.

• Professional engineer (PE) certification preferred.

• A minimum of four years' experience as a marine engineer or similar.

• Experience with engineering design software such as AutoCAD, Rhino 3D, and SOLIDWORKS.

• Sound knowledge of maritime software such as HMI and PLC control systems.

• Familiarity with maritime HM&E systems and naval construction processes.

• Experience with a variety of engineering processes including mechanical, electrical, and software.

• Excellent analytical thinking and problem-solving abilities.

• Physically fit and able to work in strenuous circumstances and harsh weather conditions.

Job Description & Requirements

Control and monitor work progress and ensure work quality.

· Responsible for working closely with project team and resolving technical issue

· Responsible for coordination and liaise with contractors, suppliers, and consultants

· Prepare and compile related report

· Attend site meetings

· Any other ad-hoc duties assigned

Requirements:

· Engineering or Civil / Structural Engineering Diploma / Equivalent

· Minimum 3 years’ relevant experience

· Carry out project planning, scheduling, cost control

Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure).

Assists in the coordination of various teams testing and evaluating for the development of design and its implementation of the best output.

Installs, configures, and tests operating systems, application software, and system management tools.

Ensures the highest level of systems and infrastructure availability.

Evaluates the existing systems and provides the technical direction.

Plans and implements system automation as required for better efficiency.

Deals with work process, optimization methods, and risk management tools in the given projects for the successful accomplishments according to the requirements of the stakeholders.

Computer science degree

Scripting and programming proficiency

OS and Network experience

Certification may be helpful

Operating systems Linux, IBM AIX & Solaris

Configuration Management Tools: Ansible and Puppet

Monitoring tools: ELK, Prometheus, Grafana

APM Tools:  Dynatrace & AppDynamics

Cloud Platforms: AWS, Microsoft Skytap, Azure and GCP

Scripting Languages:   SHELL BASH

IaaC Tools: Terraform, Dockerfile

Containerization:  Docker, PCF & Kubernetes.

UNIX System Administration (RHEL, AIX & Solaris), Problem Determination and solving, and experience on GPFS, PowerHA System Mirror, and VIO.

Experience in Observability and Monitoring including APM tools

Job Responsibilities

∙Provide L2 technical support and advice to users on systems-related issues or queries

∙Perform administration/maintenance and works toward continuous optimization of systems performance related to Microsoft 365 & MDM product e.g Google Admin Centre , Lightspeed

∙May need to be on standby with oncall availability with varied shifts including nights, weekends and holidays during critical cutover or L1 incident management

∙Provide technical support for multiple customer environments on End User Devices operations

∙Provide support for Windows / Apple / Android & Chromebook operating systems (OS), end-users software and applications

∙Develop and maintain technical documentation related to design, UAT, configuration, usage,troubleshooting, etc., for all Microsoft 365 & applications and services of MDM products

∙Work closely with Service Delivery Managers and Technical Managers to deliver operational service excellent to meet customer expectation

∙Provide support to project implementation and documentation.

∙Provide technical solution for project delivery and handle and resolve all technical aspects, with hands on approach

∙Work closely with Project Manager to deliver high quality project implementation

∙Develop and maintain PowerShell scripts used to manage / support the Microsoft 365 & Intune / Jamf environment

∙Any ad-hoc duties as assigned

Job Requirements:-

∙At least Diploma in any IT related courses

∙At least 3 - 5 years of IT experience. ICT experience in providing end user devices support / migration / implementation.

∙Fundamental knowledge of Microsoft 365 (Microsoft Teams, SharePoint online, Exchange Teams and Azure AD)

∙Familiarise with endpoint device management tools:

o On prem - Active Directory environment Group Policies (GPOs) related to endpoint

devices. Other e.g. SCCM, BitLocker, LAPS

oMDM products – Google Admin Centre / Lightspeed / Blocksi

∙Familiarise with endpoint devices operating system (OS). Windows 10/11, MacOS, iOS,

Chromebook and Android

∙Candidates are required to handle clients professionally during all interfaces, and are customer oriented, and work effectively both independently and in a team environment

∙To have Microsoft 365 related certifications MD102, MS102, CompTIA A+, etc

∙To have Apple Device Support certification.

∙Technical accredited competency for: Major hardware system vendors (e.g Lenovo, HP &

Dell)

∙Basic programming knowledge e.g. PowerShell and Visual basic scripting

∙Office Productivity tools for writing and presentation skills needs.

∙Knowledge of IT lifecycle management

∙Knowledge of ITSM - Incident Management, Problem Management, Change Management,

Asset Management, Patch Management

• Performs specific and moderate portions of a broader assignment of an experienced engineer.
• Gathers and correlates basic engineering data using established and well-defined procedures.
• Works on detailed or routine engineering assignments involving calculations and relatively simple tests.
• Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignements.
• Identifies discrepancies in results.
• Provides guidance to entry level engineers.
• Performs work in accordance with agreed upon budget and schedule with little supervision.
• Independently performs all the tasks necessary to complete primary design
• elements for engineering works. 
• Performance at this level requires developmental experience in a professional position.