Total 96 qa engineer job vacancies in Others category in D26 Upper Thomson, Springleaf

Under limited supervision, the technician will install, service, and repair electronic equipment on board ships. You will test, adjust, and troubleshoot components, PCBs, sub-assemblies, and antennas. Load, update, and modify software. Use your knowledge of electronic theory and circuitry to address a variety of technical problems. Make intelligent use of complex schematics, and manuals to accurately achieve assignments. Upon completing the assignment, you will compose a detailed service report.

most Original Equipment Manufacturers in the Marine/ Oil & Gas industry including and not limited to: SPERRY, FEDERAL SIGNAL, SEATEL, SAILOR, FURUNO, JRC, JOTRON,DANELEC, NINGLU, SKIPPER, ORLACO,HIKVISION,AXIS, PELCO, etc

Description

• Expertise in configuring, customizing, and integrating payment engines such as Global PayPlus (GPP), Finastra, and familiarity with API-based payment solutions.
• Synthesize intricate high-level requirements into actionable, product-specific deliverables. Drive gap analysis within payment systems, particularly for Global Pay Plus (GPP) engines, and leverage technical depth to integrate API-driven solutions for seamless global deployments.
• Navigate intricate vendor relationships, guiding them through RFPs and the selection of payment solutions, particularly for advanced capabilities like Virtual Account Management.
• Oversee sanctions compliance and payment risk mitigation strategies, ensuring all systems adhere to the most stringent global compliance standards.

Description

• Expertise in configuring, customizing, and integrating payment engines such as Global PayPlus (GPP), Finastra, and familiarity with API-based payment solutions.
• Synthesize intricate high-level requirements into actionable, product-specific deliverables. Drive gap analysis within payment systems, particularly for Global Pay Plus (GPP) engines, and leverage technical depth to integrate API-driven solutions for seamless global deployments.
• Navigate intricate vendor relationships, guiding them through RFPs and the selection of payment solutions, particularly for advanced capabilities like Virtual Account Management.
• Oversee sanctions compliance and payment risk mitigation strategies, ensuring all systems adhere to the most stringent global compliance standards.

• Young & energetic

• Committed to teamwork

• PLC programming

• Minimum Diploma or experience in relevant field (e.g., electronics/ electrical)

• Control panel fabrication

• AutoCAD

• Field troubleshooting

• Site survey/coordination

Develop and maintain software applications using C, C++, and Unix/Linux-based environments.

Write efficient, scalable, and well-documented code to optimize system performance.

Troubleshoot, debug, and resolve complex system and application issues.

Collaborate with cross-functional teams to design and implement new features.

Utilize shell scripting and other Unix utilities for automation and system management.

Job Title: Assistant Electrical Engineer – M&E

Occupation: Assistant Electrical Engineer (General)

Salary Range: 2.6K – 5K

Job Description

• Planning, design, assembling and installing equipment and facilities.
• Coordinate and liaise with main con, consultants, sub-contractors.
• Supervise and check subcontractors’ works according to design drawings, specifications and regulation.
• Plan and prepare projects based on stage of activities, schedule work activities.
• Reporting to electrical engineer if discrepancies in safety measures or installation procedures are found and take steps to solve the problem.
• Check and ensure the equipment and material offered in compliance with the specification and drawings.
• Oversee and be overall responsible for works carried out by supervisors assigned under his/her care.
• Generate incident reports
• Perform all other duties as assigned and required.

Requirements

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic) or equivalent.
• At least 3 year(s) of working experience in the construction or Electrical related fields is required for this position.
• Required Skill(s): Microsoft Office, Microsoft Project, Autocad, Project Management
• Preferably Junior Executive
• specialized in Engineering- Electrical or equivalent.

Job Summary

We are looking for Out systems developer who are responsible for designing, developing, testing, and deploying web and mobile applications using the Out Systems low-code platform.

Mandatory Skill-set

• Bachelor's degree in computer science, Information Technology, or a related field;
• A minimum of 5 years of experience in software development, including at least 3 years of hands-on experience with the Out Systems platform;
• Experience with Out Systems Service Center, along with proficiency in either Java or C#;
• Strong knowledge of MSSQL for effective database management and integration within applications;
• Experience with software integration using APIs and web services;
• Experience with web applications, HTML, and database systems;
• Proven experience working on Out Systems applications as either a Solutions Integrator (SI) or developer, demonstrating a strong ability to design, build, and deploy robust solutions within the Out Systems environment;
• Strong problem-solving skills and the ability to troubleshoot technical problems;
• Excellent written and verbal communication skills.

Desired Skill-set

• Out Systems certifications like Associate Developer or Professional Developer are a plus;
• Familiarity with other low-code platforms, coupled with experience in mobile application development.

Responsibilities

• Utilizing the Out Systems low-code platform for design, development, testing, and deployment of web and mobile applications;
• Using agile development methodologies to create scalable, robust, and high-performance applications;
• Collaborate with cross-functional teams to gather and analyze business requirements, translating them into technical specifications.;
• Providing technical guidance and leadership to fellow developers, fostering best practices and ensuring the successful implementation of solutions;
• Developers are responsible for identifying and resolving critical issues while ensuring the ongoing maintenance and optimization of application;
• Developers leverage their technical expertise and industry knowledge to design high-level solutions that deliver long-term value.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

The Mechanical and Electrical (M&E) Engineer is responsible for designing, coordinating, and overseeing the mechanical and electrical systems in construction or industrial projects. This role involves working closely with other engineers, architects, contractors, and project managers to ensure that mechanical and electrical systems are designed and implemented in compliance with relevant standards, are cost-effective, and meet the functional and safety requirements of the project.

1. Design and develop mechanical and electrical systems for projects, including HVAC, lighting, power distribution, and plumbing systems.
2. Collaborate with architects and civil engineers to integrate M&E systems seamlessly into the overall project design.
3. Ensure that all designs comply with local regulations, building codes, and industry standards.
4. Prepare technical specifications, drawings, and plans for mechanical and electrical installations.
5. Oversee the installation of mechanical and electrical systems, ensuring they are completed on time, within budget, and according to specifications.
6. Ensure that installation is carried out safely, adhering to safety standards and risk management protocols.
7. Conduct testing and commissioning of M&E systems to ensure they are fully operational and meet performance standards.
8. Manage the M&E components of the project, including scheduling, budgeting, and coordinating with subcontractors and vendors.
9. Monitor and supervise on-site activities to ensure compliance with M&E specifications and quality standards.
10. Collaborate with project managers and other engineers to ensure efficient project execution.
11. Provide ongoing technical support during and after the construction phase, ensuring the mechanical and electrical systems are functioning efficiently.
12. Troubleshoot and resolve issues related to mechanical and electrical systems.
13. Ensure that preventive maintenance schedules are established and followed.
14. Prepare and maintain accurate records of designs, technical specifications, calculations, and installation activities.
15. Report project progress to senior management, identifying any potential delays or issues and recommending solutions.

Requirement

• A Bachelor’s degree or Diploma in Mechanical Engineering, Electrical Engineering, or a related discipline.
• At least 3-5 years of experience in mechanical and electrical engineering, with a focus on construction, building services, or industrial projects.
• Must have Singapore's experience in HDB projects
• Holding a Professional Engineering (PE) certification or other relevant qualifications in M&E engineering (e.g., CEng, LEED accreditation) is a plus.
• Only Singaporeans and Permanent Resident need apply.

The Mechanical and Electrical (M&E) Engineer is responsible for designing, coordinating, and overseeing the mechanical and electrical systems in construction or industrial projects. This role involves working closely with other engineers, architects, contractors, and project managers to ensure that mechanical and electrical systems are designed and implemented in compliance with relevant standards, are cost-effective, and meet the functional and safety requirements of the project.

1. Design and develop mechanical and electrical systems for projects, including HVAC, lighting, power distribution, and plumbing systems.
2. Collaborate with architects and civil engineers to integrate M&E systems seamlessly into the overall project design.
3. Ensure that all designs comply with local regulations, building codes, and industry standards.
4. Prepare technical specifications, drawings, and plans for mechanical and electrical installations.
5. Oversee the installation of mechanical and electrical systems, ensuring they are completed on time, within budget, and according to specifications.
6. Ensure that installation is carried out safely, adhering to safety standards and risk management protocols.
7. Conduct testing and commissioning of M&E systems to ensure they are fully operational and meet performance standards.
8. Manage the M&E components of the project, including scheduling, budgeting, and coordinating with subcontractors and vendors.
9. Monitor and supervise on-site activities to ensure compliance with M&E specifications and quality standards.
10. Collaborate with project managers and other engineers to ensure efficient project execution.
11. Provide ongoing technical support during and after the construction phase, ensuring the mechanical and electrical systems are functioning efficiently.
12. Troubleshoot and resolve issues related to mechanical and electrical systems.
13. Ensure that preventive maintenance schedules are established and followed.
14. Prepare and maintain accurate records of designs, technical specifications, calculations, and installation activities.
15. Report project progress to senior management, identifying any potential delays or issues and recommending solutions.

Requirement

• A Bachelor’s degree or Diploma in Mechanical Engineering, Electrical Engineering, or a related discipline.
• At least 3-5 years of experience in mechanical and electrical engineering, with a focus on construction, building services, or industrial projects.
• Must have Singapore's experience in HDB projects
• Holding a Professional Engineering (PE) certification or other relevant qualifications in M&E engineering (e.g., CEng, LEED accreditation) is a plus.
• Only Singaporeans and Permanent Resident need apply.

The Mechanical and Electrical (M&E) Engineer is responsible for designing, coordinating, and overseeing the mechanical and electrical systems in construction or industrial projects. This role involves working closely with other engineers, architects, contractors, and project managers to ensure that mechanical and electrical systems are designed and implemented in compliance with relevant standards, are cost-effective, and meet the functional and safety requirements of the project.

1. Design and develop mechanical and electrical systems for projects, including HVAC, lighting, power distribution, and plumbing systems.
2. Collaborate with architects and civil engineers to integrate M&E systems seamlessly into the overall project design.
3. Ensure that all designs comply with local regulations, building codes, and industry standards.
4. Prepare technical specifications, drawings, and plans for mechanical and electrical installations.
5. Oversee the installation of mechanical and electrical systems, ensuring they are completed on time, within budget, and according to specifications.
6. Ensure that installation is carried out safely, adhering to safety standards and risk management protocols.
7. Conduct testing and commissioning of M&E systems to ensure they are fully operational and meet performance standards.
8. Manage the M&E components of the project, including scheduling, budgeting, and coordinating with subcontractors and vendors.
9. Monitor and supervise on-site activities to ensure compliance with M&E specifications and quality standards.
10. Collaborate with project managers and other engineers to ensure efficient project execution.
11. Provide ongoing technical support during and after the construction phase, ensuring the mechanical and electrical systems are functioning efficiently.
12. Troubleshoot and resolve issues related to mechanical and electrical systems.
13. Ensure that preventive maintenance schedules are established and followed.
14. Prepare and maintain accurate records of designs, technical specifications, calculations, and installation activities.
15. Report project progress to senior management, identifying any potential delays or issues and recommending solutions.

Requirement

• A Bachelor’s degree or Diploma in Mechanical Engineering, Electrical Engineering, or a related discipline.
• At least 3-5 years of experience in mechanical and electrical engineering, with a focus on construction, building services, or industrial projects.
• Must have Singapore's experience in HDB projects
• Holding a Professional Engineering (PE) certification or other relevant qualifications in M&E engineering (e.g., CEng, LEED accreditation) is a plus.
• Only Singaporeans and Permanent Resident need apply.

The Mechanical and Electrical (M&E) Engineer is responsible for designing, coordinating, and overseeing the mechanical and electrical systems in construction or industrial projects. This role involves working closely with other engineers, architects, contractors, and project managers to ensure that mechanical and electrical systems are designed and implemented in compliance with relevant standards, are cost-effective, and meet the functional and safety requirements of the project.

1. Design and develop mechanical and electrical systems for projects, including HVAC, lighting, power distribution, and plumbing systems.
2. Collaborate with architects and civil engineers to integrate M&E systems seamlessly into the overall project design.
3. Ensure that all designs comply with local regulations, building codes, and industry standards.
4. Prepare technical specifications, drawings, and plans for mechanical and electrical installations.
5. Oversee the installation of mechanical and electrical systems, ensuring they are completed on time, within budget, and according to specifications.
6. Ensure that installation is carried out safely, adhering to safety standards and risk management protocols.
7. Conduct testing and commissioning of M&E systems to ensure they are fully operational and meet performance standards.
8. Manage the M&E components of the project, including scheduling, budgeting, and coordinating with subcontractors and vendors.
9. Monitor and supervise on-site activities to ensure compliance with M&E specifications and quality standards.
10. Collaborate with project managers and other engineers to ensure efficient project execution.
11. Provide ongoing technical support during and after the construction phase, ensuring the mechanical and electrical systems are functioning efficiently.
12. Troubleshoot and resolve issues related to mechanical and electrical systems.
13. Ensure that preventive maintenance schedules are established and followed.
14. Prepare and maintain accurate records of designs, technical specifications, calculations, and installation activities.
15. Report project progress to senior management, identifying any potential delays or issues and recommending solutions.

Requirement

• A Bachelor’s degree or Diploma in Mechanical Engineering, Electrical Engineering, or a related discipline.
• At least 3-5 years of experience in mechanical and electrical engineering, with a focus on construction, building services, or industrial projects.
• Must have Singapore's experience in HDB projects
• Holding a Professional Engineering (PE) certification or other relevant qualifications in M&E engineering (e.g., CEng, LEED accreditation) is a plus.
• Only Singaporeans and Permanent Resident need apply.

Imagine how your ideas and expertise can change a patient’s life. Our Global Supply Chain team plays a central part in ensuring our products are delivered to patients with cardiovascular disease and critical care needs. You’ll partner cross-functionally with manufacturing operations and sales teams, delivering thoughtful solutions to complex challenges all while developing your knowledge of the medical device industry. Whether your work includes strategic inventory planning, labeling, warehouse management, material handling, or any of our other supply chain opportunities, you will be making a meaningful contribution to our team and to patients all over the world.

How you will make an impact:

• Develop protocols for, and implement, package design, packaging process validation, and package shelf life testing, as well as driving new packaging technologies and strategies to improve time to market and advance the technology of package engineering at Edwards
• Develop plans for moderately complex projects working closely with cross-functional team members and outside suppliers
• Validate packaging equipment and packaging manufacturing processes to determine appropriate sourcing, purchasing, installation planning and specifications
Identify and develop operations packaging projects (e.g., cost improvements, qualify new suppliers and product transfers)
• Design and optimize packaging for moderately complex projects, including new product launches and existing products throughout all stages of product development from concept to launch, including clinical trials, global and limited market releases, as well as key operations initiatives

• Other incidental duties assigned by Leadership

What you'll need (Required):
• Bachelor's Degree in Engineering or Scientific field with minimum of 6 years experience

What else we look for (Preferred):

• Good computer skills in usage of MS Office Suite; CAD experience preferred
• Good documentation, communication (e.g., written and verbal) and interpersonal relationship skills including consultative and relationship management skills
• Basic understanding of statistical techniques
• Previous experience working with lab/industrial equipment required
• Solid understanding and knowledge of principles, theories, and concepts relevant to Engineering
• Solid problem-solving, organizational, analytical and critical thinking skills
• Solid understanding of processes and equipment used in assigned work
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing
• Strict attention to detail
• Ability to interact professionally with all organizational levels
• Ability to manage competing priorities in a fast paced environment
• Must be able to work in a team environment, including the ability to manage vendors and project stakeholders
• Ability to build productive internal/external working relationships
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

Imagine how your ideas and expertise can change a patient’s life. Our Global Supply Chain team plays a central part in ensuring our products are delivered to patients with cardiovascular disease and critical care needs. You’ll partner cross-functionally with manufacturing operations and sales teams, delivering thoughtful solutions to complex challenges all while developing your knowledge of the medical device industry. Whether your work includes strategic inventory planning, labeling, warehouse management, material handling, or any of our other supply chain opportunities, you will be making a meaningful contribution to our team and to patients all over the world.

How you will make an impact:

• Develop protocols for, and implement, package design, packaging process validation, and package shelf life testing, as well as driving new packaging technologies and strategies to improve time to market and advance the technology of package engineering at Edwards
• Develop plans for moderately complex projects working closely with cross-functional team members and outside suppliers
• Validate packaging equipment and packaging manufacturing processes to determine appropriate sourcing, purchasing, installation planning and specifications
Identify and develop operations packaging projects (e.g., cost improvements, qualify new suppliers and product transfers)
• Design and optimize packaging for moderately complex projects, including new product launches and existing products throughout all stages of product development from concept to launch, including clinical trials, global and limited market releases, as well as key operations initiatives

• Other incidental duties assigned by Leadership

What you'll need (Required):
• Bachelor's Degree in Engineering or Scientific field with minimum of 10 years experience

What else we look for (Preferred):

• Good computer skills in usage of MS Office Suite; CAD experience preferred
• Good documentation, communication (e.g., written and verbal) and interpersonal relationship skills including consultative and relationship management skills
• Basic understanding of statistical techniques
• Previous experience working with lab/industrial equipment required
• Solid understanding and knowledge of principles, theories, and concepts relevant to Engineering
• Solid problem-solving, organizational, analytical and critical thinking skills
• Solid understanding of processes and equipment used in assigned work
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing
• Strict attention to detail
• Ability to interact professionally with all organizational levels
• Ability to manage competing priorities in a fast paced environment
• Must be able to work in a team environment, including the ability to manage vendors and project stakeholders
• Ability to build productive internal/external working relationships
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

Imagine how your ideas and expertise can change a patient’s life. Our Global Supply Chain team plays a central part in ensuring our products are delivered to patients with cardiovascular disease and critical care needs. You’ll partner cross-functionally with manufacturing operations and sales teams, delivering thoughtful solutions to complex challenges all while developing your knowledge of the medical device industry. Whether your work includes strategic inventory planning, labeling, warehouse management, material handling, or any of our other supply chain opportunities, you will be making a meaningful contribution to our team and to patients all over the world.

How you will make an impact:

• Develop protocols for, and implement, package design, packaging process validation, and package shelf life testing, as well as driving new packaging technologies and strategies to improve time to market and advance the technology of package engineering at Edwards
• Develop plans for moderately complex projects working closely with cross-functional team members and outside suppliers
• Validate packaging equipment and packaging manufacturing processes to determine appropriate sourcing, purchasing, installation planning and specifications
Identify and develop operations packaging projects (e.g., cost improvements, qualify new suppliers and product transfers)
• Design and optimize packaging for moderately complex projects, including new product launches and existing products throughout all stages of product development from concept to launch, including clinical trials, global and limited market releases, as well as key operations initiatives

• Other incidental duties assigned by Leadership

What you'll need (Required):
• Bachelor's Degree in Engineering or Scientific field

What else we look for (Preferred):

• Good computer skills in usage of MS Office Suite; CAD experience preferred
• Good documentation, communication (e.g., written and verbal) and interpersonal relationship skills including consultative and relationship management skills
• Basic understanding of statistical techniques
• Previous experience working with lab/industrial equipment required
• Solid understanding and knowledge of principles, theories, and concepts relevant to Engineering
• Solid problem-solving, organizational, analytical and critical thinking skills
• Solid understanding of processes and equipment used in assigned work
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing
• Strict attention to detail
• Ability to interact professionally with all organizational levels
• Ability to manage competing priorities in a fast paced environment
• Must be able to work in a team environment, including the ability to manage vendors and project stakeholders
• Ability to build productive internal/external working relationships
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

Job Purpose

The Executive / Senior Engineer is responsible for development and implementation of asset management processes within the Maintenance and Engineering (M&E) Group. The core focus of the job function will be managing and implementing asset management processes to ensure reliability and availability of operating assets.

Duties and Responsibilities

1. Develop and implement asset management plans and processes including spares management, alternate parts, and obsolescence management.

2. Work with maintenance branches to establish and maintain a comprehensive database for spares, tools, and other critical equipment for M&E group.

3. Coordinate with branches on spares and materials requisition, including preparation of approval papers.

4. Manage and coordinate applications and requests for any asset modification within the rail network.

5. Coordinate, collate and prepare performance and maintenance plans and reports across the branches for submission to the authorities.

6. Facilitate and coordinate external projects with LTA and/or external parties. 7. May be required to perform work during night hours and over weekends/public holidays.

Qualifications & Work Experience

1. Degree in Engineering discipline.

2. Knowledge of Asset Management and Quality Management standards such as ISO 9000/14000/18000/55000.

3. Prior work experience in the asset management field or statistical process control will be advantageous.

Skills

1. Proficiency in Microsoft Office Suite.

2. Basic knowledge in statistical software is advantageous.

3. Proficiency in data visualisation tools such as PowerBI or Tableau is advantageous.

Job Responsibilities:

• Manage and ensure updated documents and drawings are issued to the client and subcontractor
• Monitor the progress and keep track of the project timelines.
• Conduct weekly or monthly meeting with sub-contractors to update progress of work
• Ensure quality of work is achieved and all government and safety regulation are complied.
• Oversee drawing management and control of technical documentation
• Oversee and manage procurement of resources, control material usage on site.
• Organize labor, equipment and material for day to day site activities
• Any other duties assigned

Key Responsibilities

* Design and analyze cabin interior and mechanical components in support of aircraft interior modification projects.

* Develop drawings (e.g. LOPA, installation drawings, production drawings, etc), work instructions, procedures and recommendations.

* Develop engineering substantiation reports (e.g. Weight & Balance, Structural, Flammability reports) and Engineering Authorizations (EAs).

* Coordinate with FAA DERs and DARs, EASA CVEs and/or local civil aviation authorities for any necessary assistance and/or approvals.

* Support interior and mechanical aspects of proposal development, customer and supplier meetings including onsite modification technical support.

* Other duties as assigned.

* Temporary assignment travel of up to 3 months in the US and other countries in Asia is required.

REQUIREMENTS

- Bachelor Degree in Engineering (Aerospace or Mechanical Engineering); Experience in related commercial aircraft field either in cabin interior design or technical services would be an added advantage.

- Able to research and analyze Boeing or Airbus documents (e.g. SRM, IPC, AMM, etc.) as well as Original Equipment Manufacturer (OEM) documents (e.g. Service Bulletins, CMM, etc.).

- Able to create engineering installation and assembly drawings using CATIA V5 or INVENTOR and AutoCAD. The candidate should already understand standard engineering drawing convention such as ASME Y14.5.

- Knowledge of aircraft seating, interior components (e.g. carpets, curtains, galleys, partitions, floor and ceiling structures, etc) and décor materials.

- Knowledge of aircraft structures analysis using both Classical and FEA Methods and ability to use FEA software such as ANSYS/NASTRAN an added advantage.

- Knowledge of FAA CFR 14 Part 25 and equivalent EASA CS Regulations.

- Candidates with at least 3 to 5 years of relevant experience will be considered.

Note: Certain AAR job assignments or facilities may require proof of US Citizenship and the ability to qualify for, and maintain, applicable US Defense Security Service Clearances.

Please email your resume to [email protected] or send it to 7 Changi Business Park Vista, #03-01 SooKee HQ, Singapore 486042 and attention it to the Managing Director of AAR Engineering Services – Asia.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

Job Description & Requirements

• Collect and analyse air samples from indoor and outdoor environments, or collect and study multiple types of sources at multiple locations.
• Test samples that have been previously collected in a laboratory environment using specialized equipment and procedures.
• Set up, calibrate, stock and utilize laboratory equipment and consumables as and when required.
• Maintain regular calibration of sampling and/or laboratory equipment.
• Record accurate sampling observations and data to provide to management
• Work independently with minimal supervision or closely with a team of individuals across various disciplines or seniority levels.
• Keep detailed data reports of all sampling information collected.
• Thoroughly understand various sampling methods and how different methods can obtain different results.
• Any other duties as assigned by Supervisor
• Possess Class 3 Driving License (not mandatory)

Requirements:

• Higher NITEC, Diploma or Degree in Environmental Science, Facilities Management, Chemical Engineering or related qualifications
• Environmental engineering, Lab Environment, Environmental Science, Analyzing Information, Equipment Maintenance
• Attention to Detail, Research Skills, Reporting Research Results, Environmental Law, Site Development, Sales, technical reporting and consultancy.

Roles and responbilities

-Technical experiences in Mechanical or Facilities management related works Min 5 years

- Facilitate, manage and provide support and change management activities for all critical infrastructures within the building or client's properties. eg, ACMV, M&E, UPS, Generator Set, Fire alarm system, PA system, Passenger/ Fire, Goods Lift etc

-Assist manager to Prepare Budgetary quote for tenders

- Assist manager Prepare materials and order materials, planning etc

-Support on-site technicians and solving operations issue etc

-Able to read project drawing eg Auto CAD,BIM,SLD Diagram

-Project management

-Plan and implement preventive maintenance schedule and carry out regular inspections to properties and facilities.

-Ensure technical team to perform works in accordance to internal SOPs and BCA requirements

-Result orientated

-Meeting with clients

-Proactive and Self-discipline

Requirements

-A.Certificate or Specialist Dip in M&E Coordination / Dip in Mechanical Engineering (Green Building Technology)

B) Ngee Ann Polytechnic: Dip in i) Building Services Engineering ii) Technology (Building Services) iii) Technology (Building Services & Fire Safety) iv) Engineering (Building Services & Fire Safety)

C) Temasek Polytechnic: Dip in i) Green Building & Sustainability ii) Intelligent Building Technology

or equivalent skill or certs for Green Building services added advantage.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

• Strong proficiency in C and C++ programming languages with a minimum of 1-2 years of experience.
• Experience in software design patterns, data structures, and algorithms.
• Familiarity with Linux/Unix operating systems and development environments.
• Ability to work with version control systems such as Git.
• Experience with multi-threaded programming and concurrent systems.
• Strong problem-solving skills and the ability to analyze complex software issues.
• Good understanding of network programming and protocols is a plus.
• Excellent communication and teamwork skills.

FRESH GRADUATES EAGER TO WORK WITH C AND C++ TECHNOLOGIES ARE ENCOURAGED TO APPLY.

Electrical Engineer Responsibilities:

• Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.

• Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

• Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.

• Ensuring that installation and operations conform to standards and customer requirements by preparing electrical systems specifications, technical drawings, or topographical maps.

• Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

• Ensuring compliance with specifications, codes, or customer requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

• Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.

• Preparing specifications for purchases of electrical equipment and materials.

• Supervising or training project team members.

• Estimating material, labor, or construction costs for budget preparation.

• Maintaining electrical equipment.

• Working with a variety of technicians.

Electrical Engineer Requirements:

• Bachelor's degree in electrical engineering degree from an accredited school.

• Licensed as a professional engineer.

• Experience in using or a desire to learn the required software.

• Knowledge of applicable codes related to electronic engineering.

• Proficient in design and calculation software.