Overview

As a Design Engineer, you will assist the Technical Manager in all the designing, preparation, securing required legal documents for all the drawings (i.e.: shop drawings, structural drawings, architectural drawings and M&E drawings).

Responsibilities

1) Prepare and perform design for precast component according to client demand.

2) Responsible in the design and preparation of shop drawings and secure permits required by the government.

3) Review completed structural drawings, designs and specifications before issue for production.

4) Check and highlight all the discrepancies between Architectural, Structural and M&E drawings.

5) Co-ordinate with relevant parties on technical issues.

6) Plan & carry out production or service under controlled conditions – including product characteristics, work instructions / standard work methods, suitable equipment, Monitoring & Measurement (MM), release, delivery & post-delivery activities.

7) Ensure customer requirement are determined and met, thus enhance customer satisfaction.

8) Communicate to the organization the importance of meeting customer as well as statutory & regulatory requirement.

9) Establish the quality policy and objective.

10) Provide technical support for company operation.

11) Train, brief & supervise work and control process to work instructions / standard work methods and process plans.

12) Ensure planning & integrity of the Quality Management system (QMS).

13) Ensure Responsibility & Authority are defined & communicated.

14) Address customer satisfaction though the effective application of system, including processes for continual improvement and the prevention of non-conformity.

15) Conduct management review.

16) Ensure the availability of resources.

17) Determine, collect & analyze data for informed management decision.

18) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Bachelor degree in Civil / Structural Engineering or equivalent.

2) Minimum 3 years of relevant work experience in precast concrete industry.

3) Experience in creating 3D models of building element.

4) Prosses excellent problem definition / analytical and problem solving skills.

5) Strong verbal and written communication skills as well as excellent customer relation skills.

6) Able to work independently.

7) A team player with the ability to multi-task, prioritize and organize tasks.

Job Description

• Conduct QAQC daily checks
• Prepare monthly QAQC report for submission to Corporate QAQC Department
• Conducting monthly QAQC Training to Sub-contractors
• Issuance of QAQC Non-compliance to sub-contractors
• Attend monthly QAQC presentation and meeting at Corporate QAQC Department
• Prepare and maintain quality assurance documentation, including quality plans, inspection reports, test protocols, and other relevant records.
• Evaluate and qualify suppliers based on their quality systems, capabilities, and performance.
• Prepare and present regular reports on quality performance, including key metrics, trends, and areas of concern or improvement. Communicate findings and recommendations to management and relevant stakeholders.

Requirements

• At least advanced diploma, diploma in related qualification.
• Architectural-trained or Structural-trained work experience.
• Strong knowledge of quality control procedures, methodologies, and tools.
• Familiarity with quality management systems and standards (e.g., ISO 9001).
• Experience with inspection techniques, measurement tools, and testing equipment.
• Analytical mindset and attention to detail.
• Strong problem-solving and root cause analysis skills.
• Excellent communication and interpersonal skills.
• Ability to work effectively in cross-functional teams.
• Min 3 years’ experience

Responsibilities:

· Repair of semiconductor equipment's electrical/ electronic parts.

· Generate incoming and outgoing test reports.

· Generate repair procedures and checklist.

· Maintain high repair quality and standard.

· On site support to assist customer in the installation of the repaired items.

Requirements:

· Diploma/Nitec or equivalent in Engineering (preferably electrical or electronics)

· Fresh graduates with a good attitude are welcome to apply

· Good hands-on skills

· Good analytical & problem-solving skills

· Good comprehension of engineering literature and specifications

· Strong passion and willingness to work hard to overcome engineering challenge

· Singaporean/PR

· Coordinate with precast supplier on technical details assistance.

· Checking & submitting shop drawings to QPS/LTA for approval..

· Preparing MSRA for all work activity to be done at site.

· Monitor, planning & supervise setting up of precast storage yard.

· Monitor & supervise erection of gantry cranes at precast yard.

· Preparing the schedule for production based on site's delivery requirement.

· Checking & maintaining quality of PC production.

· Planning and scheduling of site works for PC installation.

· Monitoring storage space for precast deliveries.

· Checking quality of delivered products before installation

· Directed all necessary day to day Site activities.

· Monitoring work progress.

· Administration of all site works.

· Quality analysis and control of works.

.

Your Role

• Assist the Planning Manager in all planning functions
• Monitor progress of work on site on a daily basis
• Prepare histograms, tables, S-curves, resources logs (Manpower, Materials, Equipment)
• Develop construction programmes for medium to large-scale projects
• Maintain and update all schedules, collect actual data (progress, manpower and equipment deployment) and evaluate project delays by effective monitoring of actual progress
• Prepare daily, weekly and monthly progress reports for in-house, owner and consultant submission
• Maintain records for all significant events relevant to contractual claims/obligations
• Liaise, consult and coordinate with all Supervisors and Managers to incorporate relevant information that will affect the implementation of the project schedule

The Requirements

• Possess a Degree in Civil Engineering with at least 3 years’ working experience construction planning and programme coordination
• Has aptitude for planning role
• Be adept in Microsoft Project and Primavera P6 knowledge
• Be meticulous, highly motivated and independent with excellent team spirit and interpersonal skills

Responsibilities:

• Maintaining and administering computer networks and related computing environments including systems software, applications software, hardware, and configurations.
• Performing disaster recovery operations and data backups when required.
• Protecting data, software, and hardware by coordinating, planning, and implementing network security measures.
• Troubleshooting, diagnosing, and resolving hardware, software, and other network and system problems.
• Replacing faulty network hardware components when required.
• Maintaining, configuring, and monitoring virus protection software and email applications.
• Monitoring network performance to determine if adjustments need to be made.
• Conferring with network users about solving existing system problems.
• Operating master consoles to monitor the performance of networks and computer systems.
• Coordinating computer network access and use.
• Designing, configuring, and testing networking software, computer hardware, and operating system software.

Requirements:

• Strong understanding of network infrastructure and network hardware.
• Ability to think through problems and visualize solutions.
• Ability to implement, administer, and troubleshoot network infrastructure devices, including wireless access points, firewall, routers, switches, controllers.
• Knowledge of application transport and network infrastructure protocols.
• Ability to create accurate network diagrams and documentation for design and planning network communication systems.
• Provides specific detailed information for hardware and software selection.
• Ability to quickly learn new or unfamiliar technology and products using documentation and internet resources.
• Ability to work with all levels of staff within and outside of IT and outside the organisation.
• A self-starter able to work independently but comfortable working in a team environment.
• Good analytical and problem-solving skills.
• Dependable and flexible when necessary.
• Network security experience.
• LAN and WAN experience.

Job Description

• Assist PE/ LEW in EMA Building Licencing matters such as carry out site inspections on LT/ HT installations, review Building SLDs and provide recommendations to Customers.
• Assist PE/ LEW in Electrical switching works.
• Standby and attend emergency call up services at Customer’s installations.
• Prepare incident reports, technical proposals/ recommendations, maintenance reports, etc. to Customers.
• Site supervision and lead workers on maintenance works.
• Any other duties as assigned.

Job Requirements

• Diploma / Degree in Electrical Engineering (recognized by EMA for application of LEW)
• Good communication and interpersonal skills.
• Attractive remuneration and fringe benefits (AWS, Variable Bonus, Tranport Allowance, Handphone Allowance & etc) will commensurate with the qualifications and experience of successful candidates.

Interested applicants, please submit your full CV with present, expected salaries, contact number(s), reasons for leaving and notice period required.

• 8 years of expertise in ETL, Data Warehousing, and Big Data technologies. The candidate should have a strong background in IBM InfoSphere DataStage, Oracle PL/SQL, Unix Scripting, and hands-on experience with Moody’s tools.

• The role requires in-depth knowledge of data extraction, transformation, and loading (ETL) processes, as well as experience with CI/CD and automation tools to support efficient data operations. This is an opportunity to contribute to large-scale data projects and work closely with cross-functional teams in a challenging and dynamic environment.

• Design, develop, and maintain ETL processes using IBM InfoSphere DataStage (versions 8.1, 8.7, and 11.3).

• Build and optimize parallel jobs to clean, transform, and load data into target databases.

• Implement robust solutions for data extraction and transformation from various sources including flat files and RDBMS.

• Configure and manage job scheduling and automation using tools like Control-M and Autosys.

• Develop shell scripts and use Unix commands to enhance ETL performance and streamline data processing.

• Ensure efficient job execution, error tracking, and troubleshoot performance issues.

• Use Moody’s tools (RCO, RAY, RFO) to support liquidity, risk management, and financial reporting projects.

• Troubleshoot and resolve issues related to GL recon breaks, ALM/LIQ stress processes, and LCR processes.

• Support Big Data solutions by working with core Spark (batch processing) and Spark SQL using Scala.

• Use Hadoop technologies like HDFS, Hive, and Sqoop for large-scale data migration and analysis.

• Responsible for pre-contract and post-contract quantity surveying duties for MEP Works including preparation of cost estimates, procurement and tendering, tender evaluation, cashflow forecast, contract administration, variation, final account, etc.
• Manage the MEP Works taking off from drawings and pricing for cost estimates, tender documents, etc.
• Leading and coaching junior staff in delivery of services, including checking on the works done by junior staff
• Collaborate and develop good relationship with clients and stakeholders internally and externally
• Measuring and taking off quantities, liaising and negotiate with sub-contractors and suppliers
• Attend meetings and site inspections when required
• Comply with the Company’s QA requirements and best practice
• Establish client’s requirements and undertake feasibility studies
• Attend onsite and consultants’ meetings and liaise with clients, architects and associate consultants in the administration of projects
• Able to Source and Liaise with Site Personnel, Suppliers, Sub-contractors, Consultants and/or Architects for all project-related matters.
• Interpret engineering drawings and specifications to calculate project costs
• Prepare various contracts and nominated sub-contracts for tender and contract formalization
• Measure and take off quantities for architectural and structural work elements
• Administer pre and post contract and consultancy work
• Assess variation orders, prepare interim valuations, cost plans and budget studies
• Valuing completed work and arrange payments
• Provide advice on contractual claims

Knowledge/ Skills/ Abilities:

• Good verbal and written communication skills.
• Good working knowledge of contract/ commercial law.
• Good knowledge of construction products and materials.
• Ability to interact with various stakeholders, such as suppliers, vendors, contractors, clients, etc.
• Strong time management skills with exceptional attention to detail and ability to manage multiple tasks/ projects at one time.
• Strong organizational and interpersonal skills.
• Ability to understand and analyse construction costing information.
• Ability to maintain confidentiality, impartiality and discretion.

Job Requirements:

· Candidate must possess at least a Bachelor’s Degree/ Diploma in Electrical Quantity Surveying or its equivalent.

· 5 years and above experience as QS in Singapore.

· Proven ability in contract negotiation, contract administration & variation orders

· Competent in software skills MS Office and AutoCAD.

· Able to work independently, be meticulous, analytical with excellent problem-solving skills, proactive, a good team player & able to meet tight deadlines

· Able to start work immediately is an advantage

Job Description:

• Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned from inception to completion within the specified timeframe and of the desired quality.
• Liaise with authorities, consultants and subcontractors.
• Implement architectural and structural works.
• Good communication skills to enhance good team working spirit.

Requirements:

• Experience in management of projects will be advantageous.
• Recognized degree in Civil/Structural Engineering by P.E. Board / BCA.
• Initiative, self-motivated, possess a strong drive with high responsibility and result oriented.
• Preferably 1 - 5 years working experience in Civil & Structural works.
• Experience in engineering software and AutoCad would be an advantage.
• Fresh graduates may apply.

Responsibilities:

• Architect and implement scalable control and navigation solutions for AMRs utilizing your expertise in ROS, C++, and Python. Your focus will be on robustness, efficiency, and adaptability in real-world environments.
• Evaluate and integrate third-party systems (HW/SW) to enhance KABAM robots' capabilities.
• Conduct rigorous field tests to validate the reliability and performance of navigation systems in diverse outdoor conditions. Leverage insights gained to iteratively improve and optimize navigation algorithms, incorporating SLAM, motion planning, and perception techniques.
• Maintain comprehensive documentation of design, development, and deployment processes. Foster a culture of knowledge sharing within the team by presenting insights and lessons learned in regular sessions.
• Provide expert support for remote robot deployments at customer sites worldwide. Your troubleshooting skills and hands-on assistance will ensure seamless integration and operation of our solutions.
• Stay abreast of the latest advancements in robotics technology. Engage in continuous R&D efforts to explore new methodologies and technologies that can elevate the capabilities and performance of our AMRs. Implement findings to enhance existing systems and processes, keeping KABAM at the forefront of technological innovation.

Requirements:

• Education – Bachelors or Masters in Computer Science/Electrical Engineering/Mechanical Engineering with a focus in robotics, mechatronics, or related fields
• Experience – Bachelors (with at least 3 years relevant experience) or Masters (with at least 1 years relevant work experience)
• Industry – Previous experience in a robotics company preferred
• Supervisory – Personnel management is nice to have. Project management/technical lead experience is preferred
• Language – English (required), Mandarin (desirable)
• Technology – C++/Python, Linux, git, ROS; SLAM, motion planning, or perception techniques
• Coordinating the Work and Activities of Others — Yes
• Guiding, Directing, and Motivating — Yes
• Making Decisions and Solving Problems — Yes

Overview

As an Production Engineer (Senior / Assistant), you will assist the Production Manager in managing the Overall Operation of Precast Construction Plant. You are to adhere to Quality, Environmental, Safety Management System in accordance with Company’s standards and customers’ requirements.

Responsibilities

1) Identifies operational problems by observing and studying system functioning and performance results; investigating complaints and suggestions; interviewing process supervisors and operators; completing troubleshooting procedures.

2) Identifies operational priorities by assessing operational objectives; determining project objectives, such as, efficiency, cost savings, energy conservation, operator convenience, safety, environmental quality; estimating relevance, time, and costs.

3) Develops operational solutions by defining, studying, estimating, and screening alternative solutions; calculating economics; determining impact on total system.

4) Anticipates operational problems by studying operating targets, modes of operation, limitations & performance.

5) Improves operational quality results by studying, evaluating, and recommending process re-design; implementing changes; contributing information and opinion to improve productivity performance.

6) Provides operational management information by collecting, analyzing, and summarizing operating and engineering data and trends.

7) Maintains safe and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.

8) Participate in reviewing Company Quality, Environmental, Safety and Health Risk Assessment to ensure its effectiveness.

9) Participate in investigation of EHS incident and recommend preventive measure.

10) Authorize to stop production relating to Safety, Environmental or Efficiency issue not complying to Company Quality, Environmental, Safety and Health Management System or Procedure.

11) Verify that solutions agreed for problems relating to non-conformities relating to product process and Company Quality, Environmental, Safety and Healthsystem are implemented.

12) Review and recommend the disposition of the rejected in-coming raw material, work-in-process and finished goods.

13) Review and endorse Company Quality, Environmental, Safety and Health System Procedure.

14) Manage, coach and train the team members which include carrying out performance review and disciplinary action, if required.

15) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Minimum ITE

a) Preferably in Fabrication / Civil Engineering

b) 5 years’ experience working as Engineer or 8 years’ as Technician in a manufacturing environment

2) Diploma in Engineering

a) Preferably in Fabrication / Civil Engineering

b) 2 years’ experience working as Engineer in a manufacturing environment

3) Preferably with knowledge of manufacturing and assembling of Precasting.

4) Knowledge of ISO 9001, 14001 & 45001 standards and AutoCAD will be advantages.

5) Knowledge in Safety Management is a must.

6) IT savvy with proficient in Microsoft Office application.

7) Possess leadership and supervisory skills with manpower planning experiences.

8) Possess problem-solving, analyzing and reporting skills.

9) Possess good interpersonal skills and excellent team spirit.

10) Independent with high level of initiative and fast learner.

11) Meticulous and positive attitude in learning.

Job Overview:

As an AIGC/ Gen AI engineer, you will be responsible for pushing the boundaries of image & video generation technology for online AI applications. You will design and implement advanced image & video generation models capable of generating target images with different styles (e.g., in news, gaming applications). Additionally, you will stay abreast of the latest research developments in the image & video generative-AI technology field to ensure our solutions remain industry-leading.

As an AIGC/ Gen AI engineer in Singapore, you will design and implement image & video generation models to support the content generation tasks in AI application. Key domains of focus include text to image generation, image to image generation, text to video generation, and image to video generation.

Responsibilities:

• Investigate and apply the latest image/video generation models for various AI applications (e.g., gaming and news).
• Design and develop the text to image, image to image, text to video generation methods based on application objectives.
• Fine-tune the image and video generation models based on different targets, e.g., to generate images/video in different styles.
• Develop and train other relevant models (e.g., LoRA, ControlNet) to optimize generative content quality.
• Model inference and speed optimization to achieve online application latency requirements.
• Ability to identify the reasons on generated image/video quality issues, and find out possible solutions.

Requirements:

• Bachelor's degree or above in Computer Science, Artificial Intelligence, Electronic Engineering, Data Science, or related fields.
• A minimum of 2 years of hands-on experience with the latest image or video generation models, such as SDXL, SD 3 medium, stable video diffusion, etc.
• Proficiency in deep learning frameworks (e.g., PyTorch, TensorFlow) with experience in building end-to-end online image/video generation applications (e.g., in chatbots/agents).

Job Description:

· Strong site solving skill & site coordination to customer.

· Competent in his/her engineering skill especially in design/knowledge & understanding of code of practice in building services to customer.

· Ensure quality of material & installation by suppliers/subcontractors in line with ISO quality plan.

· Coordinate, monitor & control of supplier’s materials/equipment & subcontractors installation quality.

· Produce shop drawings & coordination of drawings & coordination of drawings etc.

· Prepare work schedules & attend client meeting and internal meeting

· Assist manager on the day-to-day activities under the master planning schedule, quality, safety etc

· Control proper coordination with main contractor to prevent rework etc

· Control site material/equipment to reduce wastage.

· To communicate closely with suppliers / subcontractors to reduce delivery delay affecting progress.

· Check for non conformance product or installation to avoid defects.

· Explore new technology and new installation methods to improve productivity level

· Follow up closely on-site progress & communicate clearly to subcontractors & supplier

· Check for non conformance product or installation to avoid defects.

· Other related duties as assigned

Requirement :

· Minimum Electrical Engineering Diploma & 4 years’ experience in Electrical contracting environment.

· Singaporean or Permanent Resident

. Knowledge of ISO 9000 / OSHAS 18000 (Minimum Requirement)

. ISO Internal Quality Auditor

. Building Construction Safety Supervisor Course

As an Inline and Final Parametric test program development engineer, you will be responsible for developing, maintaining, and optimizing Parametric test programs and strategies for semiconductor NAND Flash products. You will work closely with various engineering teams to ensure the quality, reliability, and performance of the products. You will also provide innovative solutions for test time reduction and test flow optimization.

Job Responsibilities

• Develop and maintain parametric test strategies and programs for semiconductor NAND Flash products
• Collaborate with test development and production engineering groups to ensure test program, infrastructure and system readiness for new product introduction as well as high volume manufacturing
• Improve device yield, reliability and quality through test condition optimization and data analysis and test equipment hardware optimization
• Provide cost effective and innovative solutions for production test flow optimization with cutting-edge Parametric test time reduction methodologies.
• Assist process and production teams by providing necessary engineering expertise to ensure smooth manufacturing operations.
• Introduce innovative test time reduction solutions and release Parametric programs to production in a timely manner.

Job Requirements

• Bachelor’s or Master’s Degree in Electrical, Electronics, Computer Engineering, Computer Science or any related engineering field
• Strong programming skills; Perl, C/C++, Python knowledge will be an added advantage.
• Knowledge of Unix/Linux System environment
• Solid analytical problem-solving skills
• Excellent verbal and written communication skills
• Good understanding of semiconductor device physics will be an added advantage
• Fresh graduates are most welcome to apply

Working Location :

1, North Coast Drive, Singapore 757432

About Micron

As the leader in innovative memory solutions, Micron is helping the world make sense of data by delivering technology that is transforming how the world uses information. Through our global brands — Micron, Crucial and Ballistix — we offer the industry’s broadest portfolio. We are the only company manufacturing today’s major memory and storage technologies: DRAM, NAND, NOR and 3D XPoint™ memory. Our solutions are purpose built to demonstrate the value of data to unlock financial insights, accelerate scientific breakthroughs and enhance communication around the world.

We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

For US Sites Only: To request assistance with the application process and/or for reasonable accommodations, please contact Micron’s Human Resources Department at 1-800-336-8918 or 208-368-4748 and/or by completing our General Contact Form

Keywords: Singapore || North West (SG-03) || Singapore (SG) || Frontend Manufacturing || College || Regular || Manufacturing/Production Operations || #LI-ST1 || Tier 3 ||

Evaluates, tests, installs, administers, and maintains optimal and effective Middleware components like JBOSS, Oracle WebLogic, IBM WebSphere, Apache Web server, MQ on UNIX and Linux operating environment both in On-Premise and Cloud environment.

Key Accountabilities

· Achievement of year-on-year productivity gain

· Achievement of on-time and on-budget of change request and new services

· Achievement of targets for time-line and budget & SLA contract terms for projects

Job Responsibilities & Duties

• As a Lead Systems Engineer, you will monitor and analyze systems performance data, and tune operating system to improve performance, optimize processing response time or to reflect required changes in the processing environment. You will also be the technical expert to provide technical resolution/support to internal / external customers.

• Monitors and analyses systems performance data, and tunes operating system to improve performance, optimizes processing response time or to reflect required changes in the processing environment

• Provide technical consultancy to customers on matters related to system performance, integration and configuration.

• Assist project Service Delivery Manager on managing the day-to-day Operations management.

• Subject Matter Expert (SME) level of hands-on knowledge in JBOSS, Weblogic, Apache

• Analyze system performance and makes recommendations for optimization.

• Ensure that the production environment is highly available per the needs of the business and established Service Level Agreements.

• Lead and establish Root Cause Analysis for all High Severity issues. Work with multiple teams for successful resolution of issues and incidents

• Review Incident Report.

• Participate in the upgrade/patching planning and execution of the Middleware software.

• Provide subject matter expertise (SME) for Issues, security related threats and vulnerabilities as it pertains to middleware.

• Participation in establish and test disaster recovery policies and procedures across all Middleware environments

• Ensure adherence to applicable Change and Release Management processes.

• Develop technical documentation and procedure on monitoring, performance.

• Regular projects reporting update to SDM & any other duties as and when assigned

• Lead problem determination on system errors or malfunctions and works with the application team/supplier to identify, diagnose and rectify the problem.

• Performs capacity study to analyze current resource utilization and estimates future requirements.

• Monitoring system to ensure high availability and optimal performance

• Update documentation of work.

• Supports internal and external audit exercises for the maintenance of various certifications and contractual requirements.

• Keeps abreast of technological advancement, emerging standards and new software or hardware solutions that may affect decisions on systems building or enhancements

• Strong communication and documentation skills

• Flexible and able to adapt to a rapidly changing environment

• Positive, self-motivated individual who can complete tasks independently

• Must be a team player

• Must be willing to travel and executing overseas project when is required.

• Must be able to work in 24 x 7 operations standby support environment

Minimum Qualification:

• Bachelor’s degree in Computer Science (or related area) preferred

• Oracle WebLogic, WebSphere, JBOSS certification is added advantage

Experience required:

• At least 8 years of working experience in end-to-end operations management and implementation experience which includes configuration, upgrade, and problem resolution of JBOSS, Weblogic, MQ, Apache in RedHat Linux, Unix)

• Minimum 5 years of hand-on experiences of middleware products such as Weblogic, JBOSS, Apache, Nginx, & MQ.

• Working experience in cloud environment (AWS, Azure) would be an advantage

• Red Hat Enterprise Linux & JBoss application server administration experience is required.

• Hands-on experience on RedHat & OS clustering administration, configuration, and troubleshooting

• Red Hat Enterprise Linux certification is good to have.

• AWS/Microsoft Azure cloud certification is desired

• Hands-on experience Kubernetes/Docker containers would be an advantage.

• Good understanding and support for springboot / microservices

Salary: (Junior, 2-4 yrs related experience: upto 4,000)

Time : Mon - Fri: 8.30am – 5.30pm

Location :Woodlands

JOB SCOPE (Design Engineer)

- Design, test, debug and commission the company’s product, which include jigs and fixtures, customized semi and fully automatic machines.

- Attend meetings with customers to discuss on their requirements in new projects and/or project proposals.

- Research and develop new ideas and concept to enhance company’s performance and competitiveness in the field of industrial automation.

- Procure and/or assist in the procurement of necessary items to enable the performance of above duties.

Requirements

- Minimum ITE, Diploma or Degree in Mechanical Engineering

- Minimum two years’ experience in customized Automation Machine Design.

- Experience in customized semi-con/ connector/ machine design preferred.

- Knowledge in Solidworks preferred, familiar with Pro-E and Inventor added advantage.

- Intuitive in mechanical movement, function and performance, good perception of 2D & 3D objects.

Probation period - (3 to 6 months)

Annual Wage Scheme - (Basic annual + 13th month ++)

Performance Bonus - (Depending on Sales and Nett profit)

Job Description

. Site solving skill & site coordination to customer.

· Competent in his/her engineering skill especially in design/knowledge & understanding of code of practice in building services to customer.

· Ensure quality of material & installation by suppliers/subcontractors in line with ISO quality plan.

· Coordinate, monitor & control of supplier’s materials/equipment & subcontractors installation quality.

· Produce shop drawings & coordination of drawings & coordination of drawings etc.

· Prepare work schedules & attend client meeting and internal meeting

· To assist manager on the day to day activities under the master planning schedule, quality, safety etc

· To control proper coordination with main contractor to prevent rework etc

· To control site material/equipment so as to reduce wastage.

· To communicate closely with suppliers / subcontractors to reduce delivery delay affecting progress.

· Check for non conformance product or installation to avoid defects.

· To explore new technology and new installation methods so as to improve productivity level

· Follow up closely on site progress & communicate clearly to subcontractors & supplier

· Check for non conformance product or installation to avoid defects.

· Other related duties as assigned

Requirement :

· Diploma/Degree in Mechanical Engineering.

· Singaporean or Permanent Resident only.

. Knowledge of ISO 9000 / OSHAS 18000 (Minimum Requirement)

. ISO Internal Quality Auditor

. Building Construction Safety Supervisor Course

. Experienced in subcontractor will be advantageous.

Responsibilities:

· Assist PM in project planning & execution.

· Handle technical matters such as preparing method statements, construction program, shop drawing, & other submissions related to project.

· Liaises with clients, consultants, contractors and government authorities.

· Other works assigned managers

Requirements:

· Degree in Civil Engineering (recognized PE board or Commissioner of Building Control for RE registration).

· Min 2 years of relevant working experience in road works.

· Knowledge in CAD

· Class 3 driving license

· Able to work independently

· Familiar with road work construction field

· Attractive Remuneration Package

Qualified candidates, please send in your updated resume in MS Word format via APPLY NOW

Your resume must include the following information: -

1. Current and expected salary

2. Reasons for leaving

3. Date of availability

* We regret that only shortlisted candidates will be notified

Process Engineer/Chemist (WDA)

• Based in Singapore, the regional hub for Asia Pacific (AP) and top-ranked biopharmaceutical company on the Straits Times and Statista’s list of Best Employers in Singapore for two consecutive years (2020, 2021).
• Join the premier biopharmaceutical company that has been in Singapore for more than 25 years and in AP for over 60 years.

The Process Engineer/ Chemist (WDA) provides technical supply support on the commercialization and manufacture of drug products/substances

WHAT YOU WILL DO

Responsibilities include, but are not limited to:

• Supports all technical or process activities, for example, investigations, validation and qualification processes, risk and impact assessments and process safety management activities
• Supports continuous process improvement activities to enhance site performance metrics and contributes to the global company technical network to share site experiences and knowledge and continuously expands on personal expertise.
• Supports the introduction of new products to the site and the transfer of drug products to other facilities

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Bachelor’s Degree in Chemistry, Biological, Pharmaceutical, and/or Chemical/Mechanical Engineering
• Minimum 2 years of relevant experience from oil and gas, semiconductor or manufacturing industries preferred
• Good verbal communication skill and technical writing skill
• Attention to detail

This is a Career Conversion Program (CCP for Advanced Biopharmaceuticals Manufacturing Professionals (Place-and-Train) under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• PMETs/Mid-Careerist with minimum 2 years of working experience
• Singaporeans/PRs only

We are proud to be a company that embraces the value of bringing diverse, talented, and committed people together. The fastest way to breakthrough innovation is when diverse ideas come together in an inclusive environment. We encourage our colleagues to respectfully challenge one another’s thinking and approach problems collectively. We are an equal opportunity employer, committed to fostering an inclusive and diverse workplace

You will

• Implement, Manage and Support AWS VPC, EC2, Cloudwatch, RDS, Security and Glass panel remediation, and Azure Cloud
• Integrate AWS VPC and AWS Cloud to external systems
• Windows Server 2008/2008 R2/2012/2012 R2/2016/2019 Standard/Enterprise administration, backup with restore and upgrade
• Windows Domain administration and setup
• Windows Server patch and security management
• Proficient in all latest windows operation system, server, network configuration & setup
• Other Third-Party Software Administration (e.g Third Sight, etc)
• Coordination for any server activities (e.g hardware replacement)
• Application setup & configuration
• Application deployments (bulk of the work)
• Monthly & Ad-hoc security patching (Windows, ESXi, Linux)

You bring

• Expertise VM Ware and ESXI administration
• Expertise MS Hyper-V administration
• Expertise SFTP administration
• Expertise in AD, DNS, PKI, IIS and MS Cluster administration
• Knowledge in Microsoft SharePoint Administration
• Knowledge in NetBackup administration
• Knowledge in storage administration
• Microsoft .Net & IIS Administration
• Possess good knowledge on ITIL Process
• Ability to provide support, troubleshoot and resolve problem services
• Ability to conduct regular health check on servers
• Ability to conduct regular antivirus update for all servers.
• Ability to work independent and as a team player.
• Ability to co-ordinate with vendor/Customer/Team members to solve problem.
• Ability to do asset checking, Management & tagging
• Ability to do documentations and updating.
• Ability to analyse vulnerability reports and provide timely remediation
• MS Excel knowledge for preparing monthly reports
• Flexible to work onsite from customer location

Cloud engineer with level 2/ level 3 experience

AWS/AZURE/Terraform

IaC

I2C

CICD – Infra

GCC

With Day 1 + Day 2 and customer facing exp

Min 5 yrs exp

Work location: Bedok

• Design, develop, and deploy modular cloud-based systems
• Develop and maintain cloud solutions in accordance with best practices
• Ensure efficient functioning of data storage and process functions in accordance with company security policies and best practices in cloud security
• Identify, analyze, and resolve infrastructure vulnerabilities and application deployment issues

1. JOB DESCRIPTION

Job Title

Assistant Production Engineer

Job Description & Requirements

Overview

As an Production Engineer (Senior / Assistant), you will assist the Production Manager in managing the Overall Operation of Precast Cconstruction Plant. You are to adhere to Quality, Environmental, Safety Management System in accordance with Company’s standards and customers’ requirements.

Responsibilities

1) Identifies operational problems by observing and studying system functioning and performance results; investigating complaints and suggestions; interviewing process supervisors and operators; completing troubleshooting procedures.

2) Identifies operational priorities by assessing operational objectives; determining project objectives, such as, efficiency, cost savings, energy conservation, operator convenience, safety, environmental quality; estimating relevance, time, and costs.

3) Develops operational solutions by defining, studying, estimating, and screening alternative solutions; calculating economics; determining impact on total system.

4) Anticipates operational problems by studying operating targets, modes of operation, limitations & performance.

5) Improves operational quality results by studying, evaluating, and recommending process re-design; implementing changes; contributing information and opinion to improve productivity performance.

6) Provides operational management information by collecting, analyzing, and summarizing operating and engineering data and trends.

7) Maintains safe and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.

8) Participate in reviewing Company Quality, Environmental, Safety and Health Risk Assessment to ensure its effectiveness.

9) Participate in investigation of EHS incident and recommend preventive measure.

10) Authorize to stop production relating to Safety, Environmental or Efficiency issue not complying to Company Quality, Environmental, Safety and Health Management System or Procedure.

11) Verify that solutions agreed for problems relating to non-conformities relating to product process and Company Quality, Environmental, Safety and Healthsystem are implemented.

12) Review and recommend the disposition of the rejected in-coming raw material, work-in-process and finished goods.

13) Review and endorse Company Quality, Environmental, Safety and Health System Procedure.

14) Manage, coach and train the team members which include carrying out performance review and disciplinary action, if required.

15) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Minimum ITE

a) Preferably in Fabrication / Civil Engineering

b) 5 years’ experience working as Engineer or 8 years’ as Technician in a manufacturing environment

2) Diploma in Engineering

a) Preferably in Fabrication / Civil Engineering

b) 2 years’ experience working as Engineer in a manufacturing environment

3) Preferably with knowledge of manufacturing and assembling of Precasting.

4) Knowledge of ISO 9001, 14001 & 45001 standards and AutoCAD will be advantages.

5) Knowledge in Safety Management is a must.

6) IT savvy with proficient in Microsoft Office application.

7) Possess leadership and supervisory skills with manpower planning experiences.

8) Possess problem-solving, analyzing and reporting skills.

9) Possess good interpersonal skills and excellent team spirit.

10) Independent with high level of initiative and fast learner.

11) Meticulous and positive attitude in learning.

Responsibilities:

• Develop and enhance robot software for the Smart+ RMF platform, our cloud based solution that enables remote intervention, robot management and teleoperation for any robot in the world.
• Write the code that enables Smart+ to handle new robots brought into the ecosystem.
• Integrate our robots with the world, by implementing new workflows and interactions with different systems.
• Collaborate with senior stakeholders to understand business requirements and translate them into technical specifications.
• Participate in daily standups, sprint review/planning, code reviews, and testing on physical robots as part of our agile development process.
• Produce clean, testable, and maintainable code while adhering to best practices.
• Support technical deployments both remotely and on-premise and address any issues that arise.
• Contribute to our open-source strategy, including the development of OpenRMF and ROS2.
• Support technical partnerships within our ecosystem network, including those in robotics, security, and facility management.
• Assist in defining product direction and participate in the overall architecture design and documentation for the Smart+ platform.

Requirements:

• Degree in Computer Science, Engineering, or a related field.
• 2+ years of relevant industrial experience (robotics, fleet management, system integration).
• 1+ years of professional experience with ROS, building production-level robotics systems.
• Strong proficiency in C++ and Python, with a solid background in ROS.
• Strong knowledge of networking protocols such as REST, MQTT, Zenoh, WebRTC, TCP/IP, UDP, and CAN.
• Excellent communication skills to effectively collaborate with both technical and non-technical stakeholders.

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

Today's bandwidth-intensive online lifestyle - from streaming video to generative AI - requires high-performance with uncompromised quality. Optical communication is ubiquitous in these networks worldwide, both in long and short reaches. Marvell Optics group’s development of high-speed Silicon photonics chip (PIC), advanced integrating packaging technology and design of high speed electronics (components like TIA and driver), are enabling this exponential growth of data movement through optical interconnects.

What You Can Expect

• You will setup/bring-up automated tester for the calibration and characterization of electro-optic transceivers or related components or electronics for fiber optic communications.
• Responsibilities include development of calibration routine, verification test routines, maintaining/setting up of test platform for optical transceiver testing. These tasks support products from the R&D phase all the way to high volume production.

What We're Looking For

• Master’s or Ph.D. degree in Electrical Engineering, Optical communications or other related field and a minimum of 5 years of experience in optical components testing and high-speed links testing.
• Bachelor’s degree in Electrical Engineering or related fields and 7+ years of related professional experience.
• Relevant testing experience or knowledge of optical communications from system to component level.
• Programming: Python(preferred), C, etc. (Exposures to Matlab and ADS is desirable).
• Ability to debug/validate hardware/electronics.
• (Preferred) Background in digital signal processing.
• Team player with good communication skills.