Total 273 production engineer job vacancies in Quality Assurance / Control category in d04 harbourfronttelok blangah sentosa island

Responsibilities:-

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Mechanical Contractor - Construction

• Basic: $4000 - $5000
• Variable Bonus
• 5 days (Office Hours)
• Location: Pioneer

Responsibilities:

• Work with Process team on in-process audit and FQC Audit.
• Work with Process Engineer & Engineering team on QC requirements
• Contriol of Supplier QUality Assurance (SQA).
• Quality Control of in-coming, in-process and out-going products.
• Prepare and compile report after inspection.
• Plan on construction site visit and liaise with Project Managers or Engineers.

Requirements:

• Min. IT in Manufacturing or Quality Engineering with 1 year of relevant experience.
• Knowledge of IS0 9001, 14001, 13485 & 45001
• Ability to understand DfMA modular prefab requirements, including materials selection and fabrication.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

1.Min. 10 years experience in engineering, maintenance and project execution in controls, electrical and instrumentation in Oil & Gas and Petrochemical Industries.Knowledgeable in DCS, SCADA, IPS, PLC, Interlock Logic Diagrams, Instrumentation Loop Drawings, Electrical Drawings, P&IDs.Competent in handling Honeywell (EPKS) Experion PKS (including back-up restore, HMI Web Builder, PAS Plant State Suite Alarm Management System, Corworx Software and Maximo/SAP.

We are looking for a QA Engineer proficient in Manual Testing, with keen interest in FinTech.

• Gain exposure to the FinTech Industry.
• Salary package up to $4,200 + AWS + VB (~2 months).
• Dynamic working environment.

Responsibilities

• Review requirements, specifications and technical design documents to provide timely and meaningful feedback.
• Create detailed, comprehensive and well-structured test plans and test cases.
• Perform thorough regression testing when bugs are resolved.
• Stay up-to-date with new testing tools and test strategies.
• Coordinate with development team/project management team for smooth SIT/UAT.

Requirements

• Tertiary education in Computer Science or related field.
• Min 2 years of working experience in Software Testing (Web Application/Mobile Application).
• Strong knowledge of software quality assurance methodologies, tools and processes.

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J50777 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

We are looking for a QA Engineer proficient in Automation Testing, with keen interest in FinTech.

• Gain exposure to the FinTech Industry.
• Salary package up to $4,500 + AWS + VB (~2 months).
• Dynamic working environment.

Responsibilities

• Design, develop, and maintain automation frameworks for software & Hardware testing, process automation, and data integration.
• Create detailed test cases, test plans and maintain salable automation frameworks to support continuous integration and delivery processes.
• Execute automated test cases and analyze test results to identify defects, performance issues, and areas for improvement.
• Integrate automated tests with CI/CD pipelines.
• Identify areas where automation can improve operational efficiency and reduce manual intervention.
• Document automation processes, test cases, and results for reference and auditing purposes

Requirements

• Tertiary education in Computer Science or related field.
• Min 3 years’ experience in automation development using Python / Selenium / Appium.
• Strong knowledge of software quality assurance methodologies, tools and processes.

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J50775 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

• Marine Electrical Equipment (MNC company)
• Basic $3000 - $4000
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspection & Quality Control: Perform incoming and outgoing inspections according to established procedures, including factory routine tests and official tests for switchboards. Ensure that non-conforming products are separated and rejected as necessary.
• Quality Documentation: Maintain quality records and file data. Highlight quality issues to the appropriate management for action.
• Authorization & Release: Authorize the rejection of unsatisfactory parts and the release of conforming parts for storage and customer delivery.
• Customer Satisfaction & Warranty: Ensure the successful testing and commissioning of switchboards on-site or on vessels, and address warranty claims or customer quality complaints.
• Problem Prevention & Solutions: Initiate actions to prevent non-conformities, recommend solutions, and verify their implementation.
• Safety, Calibration & Housekeeping: Follow safety rules, use calibrated instruments for inspections, maintain good housekeeping in the QA department, and assist the manager in meeting quality objectives.

Qualifications

• Min ITE/ Diploma in Electrical Engineering
• At least 2 years of QA experience

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

• Marine Electrical Equipment (MNC company)
• Basic $3000 - $4000
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspection & Quality Control: Perform incoming and outgoing inspections according to established procedures, including factory routine tests and official tests for switchboards. Ensure that non-conforming products are separated and rejected as necessary.
• Quality Documentation: Maintain quality records and file data. Highlight quality issues to the appropriate management for action.
• Authorization & Release: Authorize the rejection of unsatisfactory parts and the release of conforming parts for storage and customer delivery.
• Customer Satisfaction & Warranty: Ensure the successful testing and commissioning of switchboards on-site or on vessels, and address warranty claims or customer quality complaints.
• Problem Prevention & Solutions: Initiate actions to prevent non-conformities, recommend solutions, and verify their implementation.
• Safety, Calibration & Housekeeping: Follow safety rules, use calibrated instruments for inspections, maintain good housekeeping in the QA department, and assist the manager in meeting quality objectives.

Qualifications

• Min ITE/ Diploma in Electrical Engineering
• At least 2 years of QA experience

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Your Job

Part of the New Product Development team, you will collaborate with cross-functional teams, including design, manufacturing, and supply chain, to mitigate risks, drive improvements, and ensure compliance with internal and external quality standards to ensure the flawless introduction of products into the market.

Our Team

Molex creates connections for life by enabling technologies that transform the future and improve lives. You will be in our Datacom and Specialty Solutions (DSS) division, which designs and manufactures an extensive product line serving customers in telecommunications, datacom, (hyperscale) data center, cloud, and storage applications.

What You Will Do

• Collaborate with cross-functional teams to facilitate risk assessment and mitigation activities during design, prototype and manufacturing phases of new product development.
• Develop and implement comprehensive quality plans that is focused on the voice of customers and adhere to required internal and external standards to achieve new product qualification.
• Support supplier quality assessments and collaborate with suppliers to achieve qualification on new products.
• Lead or facilitate problem solving and resolution of quality issues during launch, and support efforts to prevent future occurrences.
• Champion continuous improvement and lean initiatives to improve new product development and advanced product quality planning.

Who You Are (Basic Qualifications)

• Experience in new product introduction - product and process development and qualification
• Experience in quality management and advance product quality planning
• Strong interpersonal skills
• Strong analytical and critical thinking abilities

What Will Put You Ahead

• Degree in Engineering or related field
• Working knowledge of electronic assembly, testing, molding, stamping, plating and assembly processes
• Strong leadership abilities

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

Part of the New Product Development team, you will collaborate with cross-functional teams, including design, manufacturing, and supply chain, to mitigate risks, drive improvements, and ensure compliance with internal and external quality standards to ensure the flawless introduction of products into the market.

Our Team

Molex creates connections for life by enabling technologies that transform the future and improve lives. You will be in our Datacom and Specialty Solutions (DSS) division, which designs and manufactures an extensive product line serving customers in telecommunications, datacom, (hyperscale) data center, cloud, and storage applications.

What You Will Do

• Collaborate with cross-functional teams to facilitate risk assessment and mitigation activities during design, prototype and manufacturing phases of new product development.
• Develop and implement comprehensive quality plans that is focused on the voice of customers and adhere to required internal and external standards to achieve new product qualification.
• Support supplier quality assessments and collaborate with suppliers to achieve qualification on new products.
• Lead or facilitate problem solving and resolution of quality issues during launch, and support efforts to prevent future occurrences.
• Champion continuous improvement and lean initiatives to improve new product development and advanced product quality planning.

Who You Are (Basic Qualifications)

• Experience in new product introduction - product and process development and qualification
• Experience in quality management and advance product quality planning
• Strong interpersonal skills
• Strong analytical and critical thinking abilities

What Will Put You Ahead

• Degree in Engineering or related field
• Working knowledge of electronic assembly, testing, molding, stamping, plating and assembly processes
• Strong leadership abilities

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

We are seeking a Senior QA Engineer who will be responsible for developing and implementing effective QA strategies and methodologies and carry out detailed functional testing to ensure products are well tested before market release. In this role, you will be required to work closely with the development team and product managers to ensure that the products meet the quality standards. You will also be responsible for creating and maintaining test plans and schedules.

Job scope and Responsibilities

• Work with product stakeholders to work out test strategy and create product test plan for new products and maintain the test plans for existing products.
• Perform product inspection and functional testing for quality and conformance to product specifications and deliverables.
• Generate test reports and conduct processes such as data and result archival
• Participating in product quality review meetings with product stakeholders
• Conduct Investigation of internal and customer reports of product quality issues and perform follow up testing, documentation and reporting.
• Monitor and maintain product issue logs and provide updates to managers and product development team.

Requirements & Skills

• Minimum 3 years of experience in product software or system testing
• Experience in leadership roles, especially in QA relevant positions will be favorable
• Strong knowledge of products or software QA methodologies and tools
• Good analytical and troubleshooting skills
• Strong communication and interpersonal skills
• Strong in written communication and report writing
• Ability to work in a fast-paced environment and meet deadlines
• Experience or expertise in any of the following domain areas will be favorable:
  • Networking or networking domain knowledge (CCNA, CCNP) or products e.g. router or switch
  • Software development and/or test automation scripting
  • Cybersecurity domain knowledge (e.g. SSCP, CISSP) or products, e.g. encryption, IDS or firewall products
• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities

• Understand/develop technical design specification/requirements and associated document relevant to project.
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and system commissioning on site.
• Produce test document and training material.
• Conduct training to customer
• Provide technical support to sales and maintenance team

Requirement

• Possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering
• Ideally with 2 or more years of DCS/PLC/SCADA/Harmonas programming experience
• Ability to read electrical/P&ID schematics
• Able to work in a collaborative team environment
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Independent problem solver with a desire to learn new skills and technology
• Work under pressure to meet project deadlines in a multi-tasking environment
• Candidates with no relevant working experience are welcome to apply

We regret that only shortlisted candidate(s) will be contacted.

JOB DESCRIPTION:

• UAT testing of existing products and driver/firmware
• Perform functional test, regression test, performance test, sanity test and other tests
• Liase with internal teams (e.g. project lead/developer/team members) to on bugs and product quality
• Co-work with R&D team to reproduce customer issues and verify fixes
• Track and isolate problems, verify resolutions, and qualify bug fixes

JOB REQUIREMENTS:

• Any engineering diploma holder or any engineering bachelor's degree holder who are interested in the testing field
• Good problem solver, ability to troubleshoot and think out of box
• Inquisitive mind, paying attention to small details and good observer
• Strong attention to detail, able to identify discrepancies during the test process
• Analytical mind to correctly judge product behaviour
• Excellent time-management skills and commitment to meet deadlines
• Good communication skills and a team player

JOB DESCRIPTION

· Design and program automated test scenarios according to test plan with its acceptance criteria

· Manage and maintain end to end automated test framework such as prepare test environment, test data, update functional testing scripts in accordance with changing requirements

· Work with QC project leader to identify, propose, prioritize and implement test automations.

· Work with test engineers to troubleshoot observed issue, determine root cause and identify solutions

· Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency

· Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

· Bachelor’s/ Master’s degree in Computer Science, Software Engineering or other equivalent degree/experience

· Strong python scripting skill and C++ programming background

· Good written and verbal communication skills in Chinese ( Required to liaise with Tawiwan colleagues)

· Able to work well both independently as well as in a team

JOB DESCRIPTION

• CP test program development.
• Work with designer to develop test programs, debug programs, solve problems.
• Work with commissioned factory to identify, propose, prioritize and implement test automations.
• Design automated test scenarios accordingly to test plan with its acceptance criteria
• The commissioned testing factory product management.
• Test plant test plan management. Ex: prepare test environment, test data, update functional test scripts according to changing requirements
• Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency
• Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

• Bachelor’s/ Master’s degree in Electronical Engineering ,Computer Science, Software Engineering or other equivalent degree/experience
• Strong VBT scripting skill and C++ programming background
• Good written and verbal communication skills in English and Mandarin is required to liaise with Chinese associates/clients
• Able to work well both independently as well as in a team
• Singaporeans are welcome to apply

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering(Civil) or equivalen.
• At least 2 years(s) of working experience in the related field is required for this position.
• Required Skill(s): Understand drawing, Quantity take off, Prepare BQ, Familiar with costing, Supplier sourcing, Contract administration.
• Preferably Senior Executive specialized in Engineering-Civil/Construction/Structural or equivalent.
• Familar with structural steelworks.
• Other QS duties as assigned from time to time.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.