Total 49 research assistant job vacancies in Quality Assurance / Control category in Tuas, South West

•Working with Process Engineer & Engineering team on QC requirement.

•Documenting inspection criteria and quality plan.

•Work with QA, Process and Product team on corrective action with quality issue.

•Work with Process team on in-process audit and FQC audit.

•Control of Supplier Quality Assurance (SQA).

•Quality control of in-coming, in-process and out-going products.

•Assist in Project team/Construction team.

•Quality check on finishing work accordance to method of statement

•Prepare and compile report after inspection.

•Plan on construction site visit and liaise with Project Manager or Engineer

•Liaise with Authority for Certification

•Provide Training to workers accordance to method of statement.

1. Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.
2. Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
3. Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
4. Ensure readiness of QC Laboratory in internal / external audits.
5. Maintain data integrity in Quality Control activities and ensure appropriate traceability.
6. Initiate change control documents.
7. Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
8. Participate in New Product Introduction activities.
9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.
10. Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
11. Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
12. Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
13. Escalate the quality events, trends as appropriate to QC Head.
14. Remain abreast of current regulatory, pharmacopeia and cGMP trends.
15. Serve as subject matter expert on laboratory instrumentation and compliance issues.
16. Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
17. Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
18. Maintains a safe laboratory environment by implementing recommendations made by EHS.
19. Initiate CAPEX for equipment purchases.
20. Support in budget preparation for QC Laboratory.
21. Any other activities as and when assigned by the Superior.

EDUCATION:

Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).

EXPERIENCE:

Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

1. Possess working knowledge of GMP in the pharmaceutical industry.
2. Excellent interpersonal and analytical skills, good verbal, and written communication skills.
3. Working knowledge of qualification, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
4. Working knowledge of method development, validation, verification of analytical method.
5. Familiarity of 21 CFR Part 11 requirements.

We are looking for passionate QA Assistant (Food Safety) to be part of the team. You will be responsible for all hygiene and food safety standards of assigned locations.

If you are looking for a fulfilling career with Singapore's No.1 Events Caterer, send us your application now!

Responsibilities

• Conduct daily on-site inspection, personal hygiene checks, products checking and sample retention.
• Follow and assist in lab test sampling schedule
• Assists in ISO 22000:2018 manual updated, and implement to operation.
• Assists in checking records, documents, and files.
• Attended to external auditors and internal auditors; assist for internal audit (central kitchen, retail outlets and supplier audit)
• Attended to pest programmes, follow up and rectification.
• Follow and enhanced developed SOPs
• Assist in develop food safety training materials and assessment plan.
• Detect any non-conformance and rectification immediately.
• Any other ad-hoc projects assigned by superior.

Requirements

• A level, Diploma or equivalent, in Food Science/ Technology/ any related standard
• Possess knowledge in SFA regulation, ISO 22000, Halal/ any other related standard
• Able to multitask and work within timeline
• Good communication skills
• Team player, proactive and meticulous in work
• Willing to work in the West

The level of appointment offered will commensurate with candidate's experience.

Interested applicants are invited to apply with your detailed resume via the “Apply Now” option.

We thank you for your interest and regret that only shortlisted candidates will be notified.

T & C Manufacturing is looking for candidates with the following pre-requisites:

• Min. GCE "O" Level (chemistry and biology).
• Some Knowledge and experience in laboratory work.

Job Descriptions as follows:

1. To perform sensory evaluation, chemical and microbiological analysis on products and raw materials.
2. Understand sampling plan and methods of sampling and carry out raw materials and products sampling according to sampling plan if necessary.
3. Preparation of laboratory culture media and reagents when necessary
4. Prepare product sample upon request by customers or for internal and external lab testing
5. To record all information required into the provided inspection form and master list.
6. Maintain good housekeeping of the lab and equipments.
7. To inform QC HOD on lab inventory status to purchase necessary items and equipments for analysis.
8. Report to HOD if any non-conformances found on raw materials and products.
9. Keeping retained raw material product sample according to production date for future reference in case any quality dispute from customers.
10. To participate in company level activity task and duty from time to time.

About Us

Established over a hundred years ago, Takasago is a global leading company in the flavour and fragrance industry, having developed flavours and fragrances for some of the world’s most successful manufacturers of foods, beverages, fine fragrances, home, and personal care products.

For over 35 years, we have been a leading industrial producer of L-Menthol, using our core technology, asymmetric synthesis.
This technology enables us to produce unique, novel, and nature-identical aroma ingredients, and in addition, to manufacture pharmaceutical intermediates, functional materials, and other fine chemicals.

Takasago Group maintains offices, production sites, and R&D centers in twenty-seven countries and regions.

Responsibilities:

• To assist senior for routine work involving sample management, registration.
• Involve in the preparation of sample for analysis and retrieving of reference sample.
• Maintain and house keep sample retain room
• Request sample from compounding lab as required
• Prepare reference samples/samples for affiliates as required
• Some basic knowledge of chemical and experiences in the chemical environment are preferred
• Maintain and ensure clean and safe working environment in FRQC Lab
• Clean lab equipment, glassware and apparatus after use
• Carry out any additional job-related duties that may be assigned from time to time

Requirements:

• Basic laboratory knowledge and experiences in chemical working environment required
• Able to read, speak, write basic English
• Minimum qualification with a Diploma in Chemical or relevant study
• Good communication and interpersonal skill
• Good organizing skill
• Basic knowledge of MS office

T & C Manufacturing is looking for candidates with the following pre-requisites:

• Min. GCE "O" Level (chemistry and biology).
• Some Knowledge and experience in laboratory work.

Job Descriptions as follows:

1. To perform sensory evaluation, chemical and microbiological analysis on products and raw materials.
2. Understand sampling plan and methods of sampling and carry out raw materials and products sampling according to sampling plan if necessary.
3. Preparation of laboratory culture media and reagents when necessary
4. Prepare product sample upon request by customers or for internal and external lab testing
5. To record all information required into the provided inspection form and master list.
6. Maintain good housekeeping of the lab and equipments.
7. To inform QC HOD on lab inventory status to purchase necessary items and equipments for analysis.
8. Report to HOD if any non-conformances found on raw materials and products.
9. Keeping retained raw material product sample according to production date for future reference in case any quality dispute from customers.
10. To participate in company level activity task and duty from time to time.

Production and Supply Chain Support

· Conduct routine and daily checks on food safety, hygiene, quality, process and general guidelines of Halal requirements in production, supply chain and logistics

· Prepare and maintain food safety, hygiene, quality and process

· Perform daily periodic site walk of whole facility

· Conduct retention samples checks

· Coordinate with microbiological laboratory for sample collection and lab reports.

· Follow-up with Procurement on investigation and corrective actions on raw material complaint / customer feedback.

Regulatory Support

· Assist in internal audits and support external audits

Import and Export Management

· Prepare and liaise with warehouse team on export procedures e.g. placement of temperature data logger device.

Vendor Management

· Perform basic troubleshoot and liaise with external vendors for routine servicing and issue follow up

Customer Management

· Provide support to customers’ request / feedback e.g. questionnaire, product specification, shelf life lab test reports.

Training

· Preparation of training materials e.g. photos, attendance sheet, assessment.

· Coordination with HODs on training schedule.

Ad-hoc Duties

· Any other duties assigned by QA manager

Requirement

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Food & Beverage Services Management, Food Technology/Nutrition/Dietetics or equivalent.

· Required skill(s): Computer Skill, MS Excel, MS Word.

· At least 1 year(s) of working experience in the related field is required for this position.

· Relevant experience in Food & Beverage industry is an advantage.

· Bilingual in English & Mandarin to liaise with Mandarin speaking associates & employees.

• 5 days, Jurong, Transport provided
• $2800 - $3400 basic, yearly AWS and performance bonus
• Insurance covered (Medical and dental benefits)
• Career advancement
• Good environment

Description

• Assist in maintaining company Integrated Management System (IMS - ISO 9001, 14001 & 13485 requirements).
• Assist in planning, conducting and/or leading internal Integrated Management System (IMS) audit and handling customer audits.
• Assist in follow up with post audit activities, document findings and raise finding reports, expedite Corrective Actions on audit findings and their closure and verify effectiveness of the Corrective Actions.
• Support and coordinate with respective internal parties to be ready before and during external audits.
• Prepare and update standard procedures and instructions for use within the organization.
• Assist in preparing annual QMS review meeting and materials for presentation.
• Supervise & lead QA Supervisor, QA Line Leader & QA Inspectors for day-to-day operation.
• Plan and maintain training competency readiness of QA Supervisor, Leader & Inspectors.
• Prepare quality reports and documents as assigned.
• Monitor and coordinate equipment’s calibration.
• Ensure inventory of QA samples and documented information issued.
• Assist to resolve quality matters with Operation
• Maintain completeness of Device History Records (DHR) for all healthcare projects.
• Coordinate Corrective Action Request (CAR) for timely and completeness of correction and corrective action(s).
• Other tasks assigned by supervisor (and above)

Requirements:

• Minimum a Diploma in Quality Assurance, Engineering, Manufacturing or equivalent
• At least 1 year of relevant experience
• Positive attitude and a team player

Interested applicants, please send your resume to [email protected]

Overview:

We are seeking a talented Test Engineer with 3 years of experience in the Facility Domain to join our dynamic team.

As a Test Engineer, you will play a crucial role in ensuring the quality and reliability of our facility management software solutions.

Your primary responsibility will be to develop and execute test plans, identify and report bugs, and work closely with developers and stakeholders to deliver high-quality products that meet customer requirements.

Responsibilities:

· Develop and execute test cases, scripts, plans, and procedures for facility management software applications.

· Perform functional, regression, integration, and performance testing.

· Identify, isolate, document, and track bugs through resolution.

· Collaborate with cross-functional teams including developers, project managers, and product owners to ensure effective communication and prompt resolution of issues.

· Participate in requirements and design reviews to provide input on functional requirements, product designs, schedules, or potential problems.

· Contribute to test automation efforts and maintain automated test scripts.

· Create and maintain test documentation.

Requirements:

· 3 years of experience in software testing within the Facility Domain or related field.

· Experience in writing clear, concise, and comprehensive test plans and test cases.

· Hands-on experience with test automation tools.

· Strong analytical and problem-solving skills with attention to detail.

· Excellent communication skills and ability to work collaboratively in a team environment.

· Experience with Agile/Scrum methodologies is a plus.

· Knowledge of facility management systems or related domains is advantageous.

• 5 days, Jurong, Transport provided
• $2800 - $3500 basic, yearly AWS and performance bonus
• Insurance covered (Medical and dental benefits)
• Career advancement
• Good environment

Description

• Assist in maintaining company Integrated Management System (IMS - ISO 9001, 14001 & 13485 requirements).
• Assist in planning, conducting and/or leading internal Integrated Management System (IMS) audit and handling customer audits.
• Assist in follow up with post audit activities, document findings and raise finding reports, expedite Corrective Actions on audit findings and their closure and verify effectiveness of the Corrective Actions.
• Support and coordinate with respective internal parties to be ready before and during external audits.
• Prepare and update standard procedures and instructions for use within the organization.
• Assist in preparing annual QMS review meeting and materials for presentation.
• Supervise & lead QA Supervisor, QA Line Leader & QA Inspectors for day-to-day operation.
• Plan and maintain training competency readiness of QA Supervisor, Leader & Inspectors.
• Prepare quality reports and documents as assigned.
• Monitor and coordinate equipment’s calibration.
• Ensure inventory of QA samples and documented information issued.
• Assist to resolve quality matters with Operation
• Maintain completeness of Device History Records (DHR) for all healthcare projects.
• Coordinate Corrective Action Request (CAR) for timely and completeness of correction and corrective action(s).
• Other tasks assigned by supervisor (and above)

Requirements:

• Minimum a Diploma in Quality Assurance, Engineering, Manufacturing or equivalent
• At least 1 year of relevant experience
• Positive attitude and a team player

Interested applicants, please send your resume to [email protected]

• 5 days, Jurong, Transport provided
• $2800 - $3500 basic, yearly AWS and performance bonus
• Insurance covered (Medical and dental benefits)
• Career advancement
• Good environment

Description

• Assist in maintaining company Integrated Management System (IMS - ISO 9001, 14001 & 13485 requirements).
• Assist in planning, conducting and/or leading internal Integrated Management System (IMS) audit and handling customer audits.
• Assist in follow up with post audit activities, document findings and raise finding reports, expedite Corrective Actions on audit findings and their closure and verify effectiveness of the Corrective Actions.
• Support and coordinate with respective internal parties to be ready before and during external audits.
• Prepare and update standard procedures and instructions for use within the organization.
• Assist in preparing annual QMS review meeting and materials for presentation.
• Supervise & lead QA Supervisor, QA Line Leader & QA Inspectors for day-to-day operation.
• Plan and maintain training competency readiness of QA Supervisor, Leader & Inspectors.
• Prepare quality reports and documents as assigned.
• Monitor and coordinate equipment’s calibration.
• Ensure inventory of QA samples and documented information issued.
• Assist to resolve quality matters with Operation
• Maintain completeness of Device History Records (DHR) for all healthcare projects.
• Coordinate Corrective Action Request (CAR) for timely and completeness of correction and corrective action(s).
• Other tasks assigned by supervisor (and above)

Requirements:

• Minimum a Diploma in Quality Assurance, Engineering, Manufacturing or equivalent
• At least 1 year of relevant experience
• Positive attitude and a team player

Interested applicants, please send your resume to [email protected]

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

-Take a lead of QA department.

- Support to provide 8D report for handling customer complaint.

- Assisting in failure analysis of internal and external defects.

- Maintain the documentation control and calibration system.

- Prepare inspection reports and analysis on Non-Conformance report.

- Provide support and training for the QC inspector.

- Assist in preparation of work instruction, procedure and inspection requirement.

- Support the supplier management by providing feedback on material quality to supplier.

- Prepare Certificate of Conformity, declaration of ROHs, REACH and other related report.

-Ensure the achievement of Quality Goal/objective in Key Performance Index Target.

-Perform dimensional inspection using CMM

-Conduct internal process audit

-Prepare & Conduct ISO 001:2015 audit

-Perform 5S and housekeeping.

-Able to plan and execute tasks within datelines and anticipate any problems before hand.

-Work well under pressure and able to finish by datelines.

-Motivated and can multitask.

-Able to work and interact with people from different backgrounds.

-Able to handle and work under stress conditions.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Info:

• Salary: Basic from $2200 - $2700 + AWS
• Working Hour: Monday - Friday (8:30am - 6pm)
• Location: Expo MRT

Job Scope:

• Schedule regular internal audits to verify compliance with SOPs, quality policies, procedures, and testing methods
• Collaborate with the incoming material receiving team
• Manage the root cause analysis and corrective action process, working with operations to implement effective and lasting solutions for quality issues
• Monitor the status of internal and external Corrective Action Reports, conducting root cause analyses as needed
• Propose resolutions for unresolved quality issues and oversee their implementation
• Coordinate external audits
• Plan and execute internal audits following established procedures
• Assist the QA Engineer/Executive in preparing ISO documents
• Familiarize the team with new measuring equipment and provide training on usage methods.
• Ensure the calibration of all measuring equipment according to prescribed intervals and standards
• Identify critical inspection points based on customer drawings and product specifications for new projects

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Job Info:

• Salary: Basic up to $4000 + AWS + VB
• Working Hour: Monday - Friday (7.50am - 4.55pm)
• Location: Joo Koon

Job Scope:

• Plan, supervise, and execute projects and tasks
• Address and prevent issues to enhance customer satisfaction regarding product quality
• Maintain quality, environmental, and water efficiency systems within the company
• Assist in the maintenance and compliance of ISO 9001, ISO 14001, IATF 16949, ISO 17025, ISO 13485, and ISO 46001 standards
• Understand the company's policies and objectives related to quality, environment, water efficiency, and occupational health and safety (OH&S), as well as environmental aspects, safety risk assessments, and information security risks
• Conduct internal Quality and Environmental Management System (QEMS and WEMS) audits and coordinate external audits
• Monitor quality failure costs in the production department
• Perform calibration and maintenance of x-ray machines, ensure cleanliness in the x-ray equipment area, and update monthly schedules for x-ray machine maintenance

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Description:

- Facilitate the collection of incoming recycled materials for production

- Create and manage production lot traveller for line usage

- Enter daily production data into productivity report and customer inventory report

- Create and maintain certificate of conformance for outgoing shipments

- To work closely with production line to ensure that customers’ orders can be fulfilled on time

- To assist in handling logistics and shipping of products

Requirements:

- Diploma in Engineering

- Prior experience in production/ manufacturing would be an advantage but not compulsory

- Basic knowledge of MS Office suite

- Possess good communication and coordination skills

- Keen leaner and willing to be hands on with the production team

Job Summary

Assist with all quality assurance matters in QA Department.

Job Responsibility

1. Responsible for inspection, testing and release of raw materials, in-process, and finished goods to ensure they meet technical specifications
2. Receive, label and store samples with relevant safety & hazard information.
3. Assist in the formulating and implementing of corporate QA systems, programs and activities
4. Assist in creating of Product Worksheet (PWS) in company SAP system for production.
5. Provide Quality Engineering support to Technical for new product development, product modification.
6. Coordinate First Batch Production Trial (FBPT) meeting and supervise first batch production
7. Assist in evaluating of production capabilities and recommends improvements
8. Assist to investigate and troubleshooting any paint quality complaints raised
9. Review batch and quality records for improvement
10. Responsible for the accuracy, integrity and reliability of laboratory test results generated.
11. Performs regular maintenance and calibration of lab equipment to ensure product testing is validated
12. 12. Execute all duties faithfully and responsibly in accordance to written procedures and to immediately report all observations of Quality and Safety non-conformances.
13. Provides support and assistance in all internal & external audits.
14. Ensure the workplace 5S, safety and security compliance to safety regulations and company’s safety standards.
15. Perform and assume other duties and responsibilities as may be required by the QA Manager

COMPANY DESCRIPTION

As Singapore's leading supermarket retail player and a household name close to all, we have grown with you over the years. It is now your turn to grow an exciting new career and fulfil your aspirations with us. Join us as we embark on a journey to make lives better for our customers, community, environment and employees.

At NTUC FairPrice, we offer you more than just a job. We are committed in giving our employees a rewarding career through comprehensive development opportunities. We promise a wonderful workplace culture with ample opportunities for growth at different levels of your career. Every of our 10,000 employees across Singapore is important.

If the prospect of working in an organization at the forefront of retail technology and innovation excites you, look no further.

Grow your career with us today and make a difference.

RESPONSIBILITIES

This role will lead a team at the executives and team leader levels; a critical role in establishing and enforcing product safety and quality standards. The incumbent is responsible for Retail Business Product Compliance and E-commerce businessquality assurance and he/ she is expected to:

• Assist the manager in leading and manage product safety and quality team to ensurecompliance with the food safety standards and regulations.
• Stay updated on industry best practices and advancements in product safety and qualitymanagement
• Develop and implement product safety and quality policies, procedures and guidelines
• Conduct inspections and internal audits to ensure adherence to product safety protocols and evaluate the effectiveness of product safety and quality systems
• Monitor and analyze data to identify trends and areas for improvement
• Collaborate with cross-functional teams to address quality issues and implement correctiveactions
• Develop and deliver training programs on product safety and quality control
• Manage the end-to-end E-commerce operations, including website compliance, product listings and delivery functions requirements.

• Degree in Food Science, Chemistry, Biotechnology or its equivalent.
• Preferably with 3 years relevant QA experience.
• Strong knowledge of product safety regulations and standards
• Experience with food safety and quality management systems
• Working knowledge of HACCP and/or ISO 22000 will be a distinct advantage.
• Good interpersonal skills with the attributes of a team player and a keen eye for details.
• Strong analytical and problem-solving abilities
• Excellent communication and interpersonal skills
• Possess a positive attitude and learning mindset.
• Ability to work cross-functionally and collaborate effectively with teams

• Work location: FairPrice Hub (next to Joo Koon MRT station)
• Working hours: Monday - Friday, 8:30am - 6pm

Job Info:

• Salary: Basic up to $4000 + AWS + VB
• Working Hour: Monday - Friday (7.50am - 4.55pm)
• Location: Joo Koon

Job Scope:

• Plan, supervise, and execute projects and tasks
• Address and prevent issues to enhance customer satisfaction regarding product quality
• Maintain quality, environmental, and water efficiency systems within the company
• Assist in the maintenance and compliance of ISO 9001, ISO 14001, IATF 16949, ISO 17025, ISO 13485, and ISO 46001 standards
• Understand the company's policies and objectives related to quality, environment, water efficiency, and occupational health and safety (OH&S), as well as environmental aspects, safety risk assessments, and information security risks
• Conduct internal Quality and Environmental Management System (QEMS and WEMS) audits and coordinate external audits
• Monitor quality failure costs in the production department
• Perform calibration and maintenance of x-ray machines, ensure cleanliness in the x-ray equipment area, and update monthly schedules for x-ray machine maintenance

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Responsibilities:

Reporting to QA/QC Manager

Implement and maintain the Quality Management Systems(ISO9001-2015, ISO14001-2015, AS9100, ISO45001(OSHA), Nadcap)

Manage the Internal and External Audits.

Review specifications and requirements,

Collaborate with Manufacturing Team to develop and implement controls and improvements.

Ensure that workflows, processes, and products comply with Quality and safety regulations.

Investigating and troubleshooting Quality or production issues.

Identify Root Causes of problems; implements and monitor effectiveness of corrective/Preventive measures.

Monitor and analyze quality performance(KPI) to identify trends in product quality or defects with the goal of mitigating and preventing recurrence and future defects.

Performs any other duty as assigned by the management.

Requirements:

Diploma in Quality or Mechanical engineering.

2+ years of experience in quality engineering, quality assurance, or a similar role.

Hands-on experience with Quality Management Systems (QMS), inspection and testing methodologies.

Experience in QA/QC function, ability to read Technical Drawing and use of measuring instrument

Strong communication and interpersonal skills.

Strong analytical and problem-solving skills.

Excellent verbal and written communication skills.

Excellent organizational skills and attention to details.

Extensive knowledge of or the ability to quickly learn the organizations production processes.

Excellent interpersonal skills with ability to serve as a liaison with customers, suppliers and internal team members.

Proficient with Microsoft Office Suite or related software.

Certified Auditor is an added advantage.

Job Summary:

· Salary: Up to $2500

· Working Days and Hours: 5 days - Monday to Friday, 8.00am - 5.15pm

· Location of work: Tuas Avenue

Job Responsibilities:

• To be involved in QC and Inspection duties in manufacturing process.
• To be responsible of QC data collection.
• To work closely with QA engineer to carry out tests in QC lab.
• To assist QA engineer in technical report preparation.
• Location: Tuas with Company transport provided.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun

Registration Number: R23116696

EA Licence No.: 06C2859

(MCI Career Services Pte Ltd)

Job Info:

• Salary: Basic from $2200 - $2700 + AWS
• Working Hour: Monday - Friday (8:30am - 6pm)
• Location: Expo MRT

Job Scope:

• Schedule regular internal audits to verify compliance with SOPs, quality policies, procedures, and testing methods
• Collaborate with the incoming material receiving team
• Manage the root cause analysis and corrective action process, working with operations to implement effective and lasting solutions for quality issues
• Monitor the status of internal and external Corrective Action Reports, conducting root cause analyses as needed
• Propose resolutions for unresolved quality issues and oversee their implementation
• Coordinate external audits
• Plan and execute internal audits following established procedures
• Assist the QA Engineer/Executive in preparing ISO documents
• Familiarize the team with new measuring equipment and provide training on usage methods.
• Ensure the calibration of all measuring equipment according to prescribed intervals and standards
• Identify critical inspection points based on customer drawings and product specifications for new projects

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147