Total 328 process engineer job vacancies in Science / R&D / Research category in Singapore

RESEARCH & DEVELOPMENT ENGINEER

The Research & Development Engineer is reporting to the Research & Development Manager

It is the responsibility of the Research & Development Engineer to:

1) Project budget planning:

- Works out project budget, investment planning and product costing, coordinates with the supervisor and monitors project expenses status.

2) Production planning:

- Ensure project are promptly executed and delivered to customer according to customer's requirements and relevant industrial standard.

- Good project management skill in prioritize projects in-charged and lead in problem solving when encounter any technical disruption. Engaged external supplier/vendor for defect improvement.

- Act as NPI leader during new product/process handover to operation team.

3) Process development:

- Lead in development of new concept in production/process improvement to enhance process stability, production yield and manpower efficiency. Engaged suitable external supplier/vendor when necessary for project in-charged.

- Systematically documented all optimizes processes parameter, flow chart, quality control plan/test, process work instruction based on the knowledge gained.

- Conduct root cause analysis on failure product and plan necessary DOE to identify the failure mode and initiate corrective/preventive action. May setup proper monitoring test with reference to industrial standard to monitor product quality.

- Engaged SDE or external supplier/vendor for improvement plan when necessary.

4) Product development:

- Participates in new product development and setup product control specification according to SCHOTT standard, relevant industrial standard and customer specific requirement.

-Conduct DFM study on new product/process

5) Quality:

- Ensures compliance with the defined QS standards and informs the employees concerned about relevant complaints. Initiates corrective measures and monitors their execution.

- Processes customer complaints that project under he/her care.

6) Occupational safety, environmental protection:

- Monitors compliance with legal and company regulations on occupational safety, accident prevention and environmental protection.

- Checks the processes with regard to safety and environmental protection issues and initiates the necessary corrections or process improvements.

7) Repair / Maintenance:

- Creates the necessary work instructions and maintenance plans that ensure regular maintenance of the systems. Takes action in the event of malfunctions and product defects.

8) Leadership:

- Leading project and capable to provide clear direction, encouragement and motivation to team members from cross departments to work together and bring success to project being assigned.

9) Ad-hoc task:

- As and when, might be en-tasked to act as ISO 9001 / ISO 16949 Internal Auditor, EHS Committee member, others..

Requirements:

· Degree in Electrical & Electronics/ Mechatronic/ Mechanical Engineering/Physics

· 3years & above of working experience.

· Will be an advantages if having working experience in Semiconductor industry backend process, Opto-electronic or sensor industry

· Required skill(s): Microsoft Office, Solidworks / Creo, Project Management, SAP

Job scope:
1. Establishing relationships with local research institutions to initiate new projects
2. Develop recycling titanium additive production technology and produce Prototype and transfer technology
3. Developing new processes and materials, testing design or processing concepts
4. Qualification or verification of materials to shorten the time for SZ to run IQC and DOE
Need to follow up and understand the research progress in the field of sustainable materials
5. Manage multiple projects and maintain good communication channels both internally and externally

Requirements:
1. Capable of producing 3DP metal materials, such as Ti/SUS/Al/Cu
2. Familiar with 3DP printing technology (Metal Laser bed powder fusion)
3. Process development experience (Metal Laser bed powder fusion)
4. At least 3 years of relevant experience

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Vivian Chung Fhui Tiin

EA Personnel Reg No: R22106436

• This position involves working with R&D engineers on the development and qualification of the Thermal printer products and systems.
• The Test Engineers will be responsible for executing all aspects of the test and qualification process for printer products, including executing test plans, documenting test results, assisting in troubleshooting of issues, and coordinating testing with in-house, out-source and driving the project to be delivered in time with high quality.

PRINCIPAL DUTIES AND RESPONSIBILITIES:

• Actively participate in Scrum teams and work with other The SQA engineers to test the printer under test.
• Learn to analyze and decompose printer systems and assist in the development of strategies to test at system level.
• Strong commitment to quality software engineering best practices and the Scrum methodology.
• Communicate and file reports on issues encountered during testing. Perform basic troubleshooting and feedback to SQA engineers with detail of issue.
• Support ad-hoc test requests from the R&D Engineers.

KNOWLEDGE, SKILLS, AND ABILITIES:

1. Degree in Electronics or Computer disciplines.
2. Minimum 4-5 years’ experience with at least one full project lifecycle SQA experience.
3. Experience in testing Printer or other Electro-Mechanical product is preferred.
4. Experience in Software Quality Assurance Methodologies.
5. Independent and goal-oriented.
6. Strong teamwork, communication and interpersonal skills

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 8 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterpart

Key Responsibilities:

• Develop and maintain server-side application logic.
• Implement data storage solutions with Redis.
• Manage messaging systems with Message Brokers.
• Collaborate with front-end developers to integrate user-facing elements with server-side logic.
• Collaborate with AI developers to integrate AI modules.
• Write reusable, testable, and efficient code.
• Design and implement low-latency, high-availability, and performance applications.
• Implement security and data protection measures.
• Integrate data storage solutions and third-party services.
• Implement an email notification system for abnormal events.
• Develop and maintain microservices architecture.
• Implement and manage CI/CD processes.
• Manage and deploy applications on Kubernetes.
• Troubleshoot, debug and upgrade software.
• Write technical documentation.

Requirements:

• Proven more than 8 years of experience as a Software Engineer or similar role in software development.
• Proficiency in using Redis and Message Brokers.
• Experience in implementing email notification systems.
• Strong knowledge of server-side languages.
• Experience in microservices architecture project development.
• Proficiency in DevOps and familiarity with CI/CD processes.
• Familiarity with Kubernetes.
• Familiarity with front-end languages (e.g., HTML, JavaScript, and CSS).
• Degree in Computer Science, Statistics, or a relevant field.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 5 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• Develop power measurement device with wired & wireless connectivity.
• Design & Develop firmware for HEMS (Home Energy Management System), IoT gateway, and Human-Machine Interface products.
• Develop peripherals using MCU/DSP.
• Develop applications/products based on the Linux Platform.
• Conduct design reviews, bug fixes and update/create design documentation.
• Work with other team members to test and verify system-level functionality.

Requirements:

• Bachelor/Master of Electrical/Electronic/Computer Engineering
• Min. 8 years of working experience in R&D or product development as a firmware engineer.
• Extensive experience in Embedded Programming using C/C++/Rust for Embedded Linux and MCU
• Experience in real-time operating systems (FreeRTOS…etc.)
• Source code control and management using Git.
• Knowledge of Python to create debugging scripts.
• Experience in coding and debugging various communication interfaces and protocols (I2C, SPI, UART, Modbus RTU/TCP, RS232/485)
• Experience in wireless communication systems and protocols (IEEE 802.15.4, Wi-Fi, Bluetooth, Zigbee, Thread, LTE, NB-IoT, LoRa)
• Able to read schematics, and utilize Oscilloscopes and other test equipment to debug Firmware issues.
• Remote firmware update and bootloader design

Key Responsibilities:

• Develop power measurement device with wired & wireless connectivity.
• Design & Develop firmware for HEMS (Home Energy Management System), IoT gateway, and Human-Machine Interface products.
• Develop peripherals using MCU/DSP.
• Develop applications/products based on the Linux Platform.
• Conduct design reviews, bug fixes and update/create design documentation.
• Work with other team members to test and verify system-level functionality.

Requirements:

• Bachelor/Master of Electrical/Electronic/Computer Engineering
• Min. 3 years of working experience in R&D or product development as a firmware engineer.
• Extensive experience in Embedded Programming using C/C++/Rust for Embedded Linux and MCU
• Experience in real-time operating systems (FreeRTOS…etc.)
• Source code control and management using Git.
• Knowledge of Python to create debugging scripts.
• Experience in coding and debugging various communication interfaces and protocols (I2C, SPI, UART, Modbus RTU/TCP, RS232/485)
• Experience in wireless communication systems and protocols (IEEE 802.15.4, Wi-Fi, Bluetooth, Zigbee, Thread, LTE, NB-IoT, LoRa)
• Able to read schematics, and utilize Oscilloscopes and other test equipment to debug Firmware issues.
• Remote firmware update and bootloader design

Key Responsibilities:

• Develop and maintain server-side application logic.
• Implement data storage solutions with Redis.
• Manage messaging systems with Message Brokers.
• Collaborate with front-end developers to integrate user-facing elements with server-side logic.
• Collaborate with AI developers to integrate AI modules.
• Write reusable, testable, and efficient code.
• Design and implement low-latency, high-availability, and performance applications.
• Implement security and data protection measures.
• Integrate data storage solutions and third-party services.
• Implement an email notification system for abnormal events.
• Develop and maintain microservices architecture.
• Implement and manage CI/CD processes.
• Manage and deploy applications on Kubernetes.
• Troubleshoot, debug and upgrade software.
• Write technical documentation.

Requirements:

• Proven experience as a Software Engineer or similar role in software development.
• Proficiency in using Redis and Message Brokers.
• Experience in implementing email notification systems.
• Strong knowledge of server-side languages.
• Experience in microservices architecture project development.
• Proficiency in DevOps and familiarity with CI/CD processes.
• Familiarity with Kubernetes.
• Familiarity with front-end languages (e.g., HTML, JavaScript, and CSS).
• Degree in Computer Science, Statistics, or a relevant field.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 3 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• Develop power measurement device with wired & wireless connectivity.
• Design & Develop firmware for HEMS (Home Energy Management System), IoT gateway, and Human-Machine Interface products.
• Develop peripherals using MCU/DSP.
• Develop applications/products based on the Linux Platform.
• Conduct design reviews, bug fixes and update/create design documentation.
• Work with other team members to test and verify system-level functionality.

Requirements:

• Bachelor/Master of Electrical/Electronic/Computer Engineering
• Min. 5 years of working experience in R&D or product development as a firmware engineer.
• Extensive experience in Embedded Programming using C/C++/Rust for Embedded Linux and MCU
• Experience in real-time operating systems (FreeRTOS…etc.)
• Source code control and management using Git.
• Knowledge of Python to create debugging scripts.
• Experience in coding and debugging various communication interfaces and protocols (I2C, SPI, UART, Modbus RTU/TCP, RS232/485)
• Experience in wireless communication systems and protocols (IEEE 802.15.4, Wi-Fi, Bluetooth, Zigbee, Thread, LTE, NB-IoT, LoRa)
• Able to read schematics, and utilize Oscilloscopes and other test equipment to debug Firmware issues.
• Remote firmware update and bootloader design

Key Responsibilities:

• Develop and maintain server-side application logic.
• Implement data storage solutions with Redis.
• Manage messaging systems with Message Brokers.
• Collaborate with front-end developers to integrate user-facing elements with server-side logic.
• Collaborate with AI developers to integrate AI modules.
• Write reusable, testable, and efficient code.
• Design and implement low-latency, high-availability, and performance applications.
• Implement security and data protection measures.
• Integrate data storage solutions and third-party services.
• Implement an email notification system for abnormal events.
• Develop and maintain microservices architecture.
• Implement and manage CI/CD processes.
• Manage and deploy applications on Kubernetes.
• Troubleshoot, debug and upgrade software.
• Write technical documentation.

Requirements:

• Proven 5 years of working experiences as a Software Engineer or similar role in software development.
• Proficiency in using Redis and Message Brokers.
• Experience in implementing email notification systems.
• Strong knowledge of server-side languages.
• Experience in microservices architecture project development.
• Proficiency in DevOps and familiarity with CI/CD processes.
• Familiarity with Kubernetes.
• Familiarity with front-end languages (e.g., HTML, JavaScript, and CSS).
• Degree in Computer Science, Statistics, or a relevant field.

New Product Development

• Proceeds development according to implement plan
• Makes functional specification
• Proceeds electrical, or firmware design
• Plans and proceeds prototype model evaluation and prepare evaluation to reports.

Re-design of Products

• Supports Lead Engineer to estimate return and investment.
• Proceed re-design according to implementation plan.
• Proceeds electrical, mechanical or firmware design.
• Plans and proceeds prototype model evaluation and prepare evaluation report.
• Makes up product manufacturing standard.

Technical Support

• Prepares technical information for parts localize and price negotiation.
• Supports production line if necessary according to superior’s direction.
• Supports parts faculty/investigation according to superior’s direction.

Requirements:

• Bachelor of Mechanical Engineering or its equivement.
• Experience in analog or digital electrical hardware design
• Entry level are welcome to apply.

Electronics Manufacturing Industry

East/Bedok

5 days work week

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Tel: 62226441

Attention: Audris Teo / EA Personnel No: R1102063

About the Job:

As an engineer in our R&D hardware design team, you will collaborate with manufacturing and engineering teams to design and implement client’s state of the art measurement and calibration procedures and perform analyses to set specifications for all new products during development. You will have engineering responsibility for the product design as it is released into production and beyond. This is your opportunity to join a team that's bringing new products and technologies to the market faster and more efficiently than ever before!

About the Team:

Our R&D teams are multi-disciplinary, involving electrical, software, and mechanical engineers. You will be part of a product development team that collaborates closely with cross functional teams to design, develop, and test our new electronic circuit cards and maintain existing products for measurement in ICT platform.

Responsibilities:

• Develop and maintain FPGA designs using hardware description languages (HDLs) such as VHDL or Verilog, ensuring they meet the functional and performance requirements.
• Collaborate with system architects to define the system architecture and determine how the FPGA will interface with other components on the PCA board and choose an appropriate FPGA based on the project's requirements.
• Implement high-speed interfaces, such as DDR memory interfaces or high-speed data communication protocols, on the FPGA.
• Implement signal processing algorithms, both analog and digital, on the FPGA to process and analyze data from test and measurement sensors.
• Develop testbenches and perform simulation to verify the FPGA design. Conduct functional, timing, and performance tests on the PCA board to ensure it meets specifications.
• Use FPGA development tools to synthesize and implement the design onto the FPGA, considering resource utilization and timing constraints.
• Collaborate with PCB designers to ensure proper integration of the FPGA into the PCA board layout, taking into account signal integrity and power distribution.
• Implement calibration routines and algorithms to maintain the accuracy and reliability of measurement data.
• Develop algorithms for real-time data processing, including filtering, averaging, and statistical analysis.
• Collaborate with a team to test, validate, and debug analog and power circuits.

· Expertise in analog and power circuit design, along with schematic creation and PCB layout, to develop tailored solutions according to project requirements is an added advantage for this role.

Basic Qualifications:

· Bachelor/Master/PhD Degree in Computer Engineering or Electrical/Electronic engineering.

· Min 5 years working experience in R&D or similar product generation environment as electronic and FPGA firmware engineer.

• Strong proficiency in digital circuit design and FPGA firmware design.
• Extensive experience in reading and understanding electrical schematics, technical drawings, datasheets, and written work instructions.
• In-depth knowledge and experience in developing, testing and trouble-shooting circuit and FPGA firmware design.
• Good organizational skills and ability to thrive in a fast-paced, results-driven environment.
• Hands-on experience of lab-based debugging and validation of circuits.
• Self-motivated and capable of working independently while following high-level objectives.
• Demonstrated analytical problem-solving skills and excellent communication abilities.
• Proficiency in coding, synthesizing, and simulating VHDL and Verilog RTL implementations using Xilinx FPGA.

Desired Qualifications:

• Knowledge of general communication protocols, such as I2C, SPI, JTAG, UART.
• Familiarity with analog and digital test and measurement techniques.
• Experienced in using electronic test and measurement equipment for validating both analog and digital circuits.
• Experienced in design using Xilinx Spartan 7 FPGA and Intel FPGA Cyclone V SoC would be advantageous.
• Proficiency in FPGA firmware CAD design tools Vivado and Quartus.
• Proficiency in electronic circuit CAD design tools DxDesigner/Expedition.
• Understanding of hardware, firmware, and software/hardware interactions is highly desired.

The role requires the incumbent to work closely with the R&D and Manufacturing Operations teams to integrate innovative technologies into product designs and manufacturing processes. The candidate will play a crucial role in process development, line validation, and ensuring adherence to clean room protocols and quality regulations within the medical device industry.

Responsibilities

• Conduct electromechanical engineering activities to integrate new technologies into future products.
• Implement improvements to manufacturing processes and procedures.
• Initiate and coordinate manufacturing improvement activities and projects.
• Develop and optimize manufacturing processes for the assembly of the companys products, both internally and with external partners.
• Ensure compliance with manufacturing discipline, cleanroom protocols, and housekeeping standards.
• Complete assembly builds and tests on schedule, following required specifications, drawings, and work instructions.
• Generate necessary documentation for manufacturing stations.
• Liaise with vendors and suppliers as needed for manufacturing requirements.
• Collaborate with the team in problem-solving and troubleshooting activities.
• Willingness for regional travel as required by the job.
• Perform additional duties as assigned to support manufacturing operations.

Requirements

• Bachelors degree or higher in Electro-Mechanical Engineering, Mechatronics, Mechanical Engineering, or a related field.
• 5 to 10 years of relevant industry experience, preferably in product development and manufacturing within the medical devices or biomedical engineering sector.
• Excellent multitasking abilities and a hands-on approach to work.
• Strong communication skills for effective interactions with teams, customers, and suppliers.
• Proactive, independent, and self-motivated with a keen interest in professional growth.
• A good team player, willing to assist teammates and take on additional responsibilities.
• A strong passion for product commercialization.
• Analytical thinking and problem-solving capabilities.
• Ability to work responsibly under pressure.
• Competent project management skills.

Apply for Position
Or refer someone

Responsibility:

1. Implement new robotic capabilities in adaptive control, integrated vision and sensory system.

2. Create software architecture, design and evaluate technologies to use.

3. Design, analyse, troubleshooting and debug systems and development software solutions for industry members by translating business requirements into system requirements.

4. Software development in C/C++/Python/ROS for robotic applications.

5. Integrated software with robotic hardware and mechanics to automate the adaptive robotic process.

6. Develop software system for localization, object detection & tracking, control of the robot · Computer Vision algorithm – object detection & classification · Localization algorithm based on Lidar, Camera, GPS · Sensor fusion algorithm for reliable, precise localization, object tracking · Embedded System interfacing with sensors, actuators

Requirements:

1. Software development experience (GUI, drivers, Linux-based development)

2. Development experience using C++, Python, openGL and OpenCV

3. Experience and expert knowledge of robot technologies, processes/techniques

4. Proficient in ROS

5. Experience with robotics or control system product design

6. Knowledge of industry standards for installation of industrial equipment.

7. Experience in the following areas: object tracking, sensor fusion, motion planning and coordination.

8. Bachelor’s degree or Diploma in Computer Science or Mechatronics.

8. 1 to 2 years work experience required however entry level candidates are welcome too.

9. On-job training will be provided.

Interested applicant may drop your resume to [email protected] or call 62952218

Description

Acts as a project lead by establishing development plans and preparing for design reviews.

Guides others on engineering tools, test specifications and assesses application of Health, Safety, and Environment techniques during the design process.

Applies and interprets engineering calculations to obtain design solutions and troubleshoot erroneous results. Defines input requirements and develops functional specifications by utilizing basic statistical methods and reliability techniques. Contributes to Halliburton’s Intellectual Property portfolio by delivering innovative and commercially successful solutions.

Creates an impactful relationship with Halliburton’s technical community, customers, and vendors by proactively collaborating with key stakeholders. Participates in professional societies in area of specialization.

Skills acquired through the completion of a degree in Mechanical Engineering or similar discipline.

Requirement

Minimum educational requirement of a doctoral degree and zero years’ experience or a master’s degree and two or more years’ related experience or a bachelor’s degree and four or more years’ related experience.

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

How Will You Make an Impact?

​Thermo Fisher Scientific Inc. (NYSE: TMO) is the world leader in serving science, with annual revenue of over $40 billion.

Everything we do starts with our Mission: to enable our customers to make the world healthier, cleaner, and safer.

The nature of our business is to enable growth and innovation within the global scientific community and to help researchers, organizations, and companies tackle some of the world’s most pressing issues. We do that by providing ground breaking technologies and services that are the result of our significant investment in research and development.

We believe crafting a better tomorrow starts with the action we take today, and we continually strive toward improvement and excellence for the benefit of our customers, our colleagues, and the world.

What will you do?

• Use systems engineering approaches, we partner with the R&D/technical lead to guide the project team to research and develop life science systems to address sophisticated challenges and/or improve customers' workflow.
• We initiate and guide discussions with key partners to generate requirements
• We refine and manage requirements to ensure they are timely implemented at different stages
• We support the development team in feasibility studies and concept selection through concept testing activities
• We lead system integration activities to ensure a smooth and timely transition from design to operations
• We partner and support our regulatory affairs representative during product development to meet relevant ISO and FDA standards and guidelines
• We undertake and address vital tasks to achieve the product launch objectives

How will you get here?

Education / Experience

• Minimum bachelor’s degree in electrical/electronic or mechanical engineering field
• At least 5 years of R&D experience in either product design, medical device consumable development/manufacturing or systems engineering

Knowledge, Skills, Abilities

• Experience in the field of Gene/Cell Therapy or relating instrumentations and technologies e.g. electrophoresis, electroporation etc. will be an added advantage.
• Experience in development and manufacturing of consumables for sterile use
• Knowledge in medical or cell/gene therapy regulatory standards are useful.
• Hands on ability with acute analytical and trouble shooting skills are vital to succeed in the role.
• Proficient in communication and collaborators’ management
• Work well with team members from a diverse set of backgrounds and teams.
• Proficiencies in general Engineering, instrument/consumables manufacturing subject areas.

Our Mission is to enable our customers to make the world healthier, cleaner and safer. Watch as our colleagues explain 5 reasons to work with us. As one team of 100,000+ colleagues, we share a common set of values - Integrity, Intensity, Innovation and Involvement - working together to accelerate research, solve complex scientific challenges, drive technological innovation and support patients in need. #StartYourStory at Thermo Fisher Scientific, where diverse experiences, backgrounds and perspectives are valued.

Apply today! http://jobs.thermofisher.com

Job Description

As part of the Thermo Fisher Scientific team, you’ll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life every single day to enable our customers to make the world healthier, cleaner and safer. We provide our global teams with the resources needed to achieve individual career goals while helping to take science a step beyond by developing solutions for some of the world’s toughest challenges, like protecting the environment, making sure our food is safe or helping find cures for cancer.

What will you do?

• Collaborate with a distributed team of engineers for innovative product design
• Derive product level requirements into system/sub system level functional requirements
• Design, develop and maintain embedded software for life science instruments
• Perform design and code reviews to ensure software quality
• Participate in test results review, root cause analysis and propose solutions
• Practice Software Configuration Management according to the project-specific software

Development plan

• Apply new technologies and software features to enhance performance and improve quality
• Maintain and align with ISO 13485 procedures and SOPs in the course of application development
• Ensure that systems and procedures are in compliance with ISO 9001, ISO 14001, ISO 13845, ISO 14971, QSR21CFR and OHSAS 18001 requirements

How will you get here?

Education

• Degree/Master in Computer Science/Computer Engineering/Electrical Engineering

Experience

• C/C++ programming (2 years)
• Python (2 years)
• Embedded software development tools (2 years)
• Linux based software development experience (2 years)
• Source Code Version Control (2 years)
• Embedded Linux programming (2 years)
• Microprocessor architecture (Intel, ARM Cortex-A processors) (2 years)
• Continuous Integration and Agile Programming (2 years)

Knowledge, Skills, Abilities

• Software Development Process such as SDLC experience preferred
• Embedded device development experience preferred
• In-depth knowledge of Linux internals
• GIT and SVN version control experience preferred

Our Mission is to enable our customers to make the world healthier, cleaner and safer. Watch as our colleagues explain 5 reasons to work with us. As one team of 100,000+ colleagues, we share a common set of values - Integrity, Intensity, Innovation and Involvement - working together to accelerate research, solve complex scientific challenges, drive technological innovation and support patients in need. #StartYourStory at Thermo Fisher Scientific, where diverse experiences, backgrounds and perspectives are valued.

Apply today! http://jobs.thermofisher.com

New Product Development

• Proceeds development according to implement plan
• Makes functional specification
• Proceeds electrical, or firmware design
• Plans and proceeds prototype model evaluation and prepare evaluation to reports.

Re-design of Products

• Supports Lead Engineer to estimate return and investment.
• Proceed re-design according to implementation plan.
• Proceeds electrical, mechanical or firmware design.
• Plans and proceeds prototype model evaluation and prepare evaluation report.
• Makes up product manufacturing standard.

Technical Support

• Prepares technical information for parts localize and price negotiation.
• Supports production line if necessary according to superior’s direction.
• Supports parts faculty/investigation according to superior’s direction.

Requirements:

• Bachelor of Mechanical Engineering
• Experience in analog or digital electrical hardware design
• Entry level are welcome to apply.

Electronics Manufacturing Industry

East/Bedok

5 days work week

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Tel: 62226441

Attention: Audris Teo / EA Personnel No: R1102063

Primary Job Responsibilities:

• Develop new processes, materials and applications.
• Generate material and component specifications
• Generate test protocols, reports and manufacturing instructions.
• Organize and maintain experimental lab.
• Generate engineering drawings of devices and fixtures.
• Prototyping and building devices and fixtures for design evaluation and testing.
• Assist in development of assembly and manufacturing processes.
• Testing and other design evaluation, verification and validation activities per written and verbal test procedures.
• Inspecting components, sub-assemblies and finals assemblies for pilot builds.

Secondary Job Responsibilities:

• Communicate effectively and clearly, through verbal and written means
• Work independently with minimal supervision.
• Support product development, manufacturing and release.
• Perform other activities as necessary and as directed by Senior Management.
• Any other matters as decided by company.

Minimum Education Required:

• BEng or equivalent degree in technical area.

Additional Qualifications Required:

• Must have experience in design / product development, preferably in medical device industry.
• Previous experience in catheters and stents will be a plus.
• Experience with using 3D CAD software (eg. Solidworks, AutoCAD).

Minimum Experience:

• 1-2 years’ experience in design / product development, preferably in medical device environment.
• Fresh Graduate will be considered

Supervisory Responsibilities:

• N.A

Working Conditions:

• Office environment
• No medical conditions preventing access to the controlled production areas.

Keysight is on the forefront of technology innovation, delivering breakthroughs and trusted insights to the world’s visionaries and innovators in electronic design, simulation, prototyping, test, manufacturing, and optimization. Our ~15,000 employees create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries. Our technical solutions – and our methods for creating them – help connect and secure the world. Learn more about what we do and how we do it.

Our powerful culture has led to us being independently recognized on Fortune 100’s Best Companies List and we are “Great Place to Work” Certified. We’re driven, collaborative, ethical, and curious, and we value all ideas, especially bold ones. And our culture extends far beyond our own walls. Our corporate social responsibility efforts support our communities, nurture the next generation of engineers, and promote environmental sustainability.

At Keysight, Inclusion, Equity & Diversity is an integral part of our core values. We believe that when people feel a sense of belonging, they can be more creative, innovative, and thrive at all points in their careers. We believe everyone should be respected in the workplace and in their communities regardless of race, color, age, gender, sexual orientation, gender identity and expression, ethnicity, religion, disability, veteran status, national origin, or any protected class. We continuously challenge ourselves to grow in our understanding of inclusion by engaging in a wide variety of diversity programs, initiatives, employee network groups and mentoring/development. This is Keysight – People and Culture - YouTube

Job Description

Responsibilities

• Work closely with cross-functional team (R&D, marketing, Order fulfilment, etc)
• Design and develop firmware and software for Keysight’s Manufacturing Test products. (new product generation or existing product maintenance)
• Work closely with system experts to evaluate, design and develop measurement software to enhance test & measurement capabilities
• Be the owner of one or multiple sub-systems and make changes in current system software/firmware to correct errors/improve on quality and create extensions to add new features or performance improvements.
• Design and Perform software/firmware testing. (unit test, integration test, etc)
• Participate or conduct technical reviews to identify problems early in the development phases
• Create detailed technical design documentations

Job Qualifications

• Bachelor/Master/PhD Degree in Computer Science or Electrical/Electronic engineering
• Min 5 years working experience in R&D or similar product generation environment as software/firmware engineer
• Experience and demonstrated understanding of software methodologies and good practices
• Strong C/C++ programming skills and demonstrated structured programming experience
• Experience in software development using C#, .NET, WPF.
• Exposure / Experience in software development toolset (IDE, graphical and numerical libraries, performance and memory usage profilers etc.)
• Good knowledge of Real time & Embedded system, fundamentals, design methodologies
• Working Experience in RTOS - embedded Linux, VxWorks, FreeRTOS.
• Familiarity with version control software – Git, ClearCase.
• Experience using equipment like oscilloscopes, logic analyzer for problem resolution and design verification.
• Working knowledge of ARM-Based microcontrollers such as NXP MK24/64, TI TMS320/ AM2434 is an added advantage.
• Working knowledge related to low level device driver development for peripherals like Serial (SPI/I2C/RS485), USB, Ethernet is an added advantage.
• Experience in Perl/Python scripting languages is an added advantage.
• Knowledge of Manufacturing test industry highly regarded.
• Self-motivated team player with strong interpersonal skills

Keysight is on the forefront of technology innovation, delivering breakthroughs and trusted insights to the world’s visionaries and innovators in electronic design, simulation, prototyping, test, manufacturing, and optimization. Our ~15,000 employees create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries. Our technical solutions – and our methods for creating them – help connect and secure the world. Learn more about what we do and how we do it.

Our powerful culture has led to us being independently recognized on Fortune 100’s Best Companies List and we are “Great Place to Work” Certified. We’re driven, collaborative, ethical, and curious, and we value all ideas, especially bold ones. And our culture extends far beyond our own walls. Our corporate social responsibility efforts support our communities, nurture the next generation of engineers, and promote environmental sustainability.

At Keysight, Inclusion, Equity & Diversity is an integral part of our core values. We believe that when people feel a sense of belonging, they can be more creative, innovative, and thrive at all points in their careers. We believe everyone should be respected in the workplace and in their communities regardless of race, color, age, gender, sexual orientation, gender identity and expression, ethnicity, religion, disability, veteran status, national origin, or any protected class. We continuously challenge ourselves to grow in our understanding of inclusion by engaging in a wide variety of diversity programs, initiatives, employee network groups and mentoring/development. This is Keysight – People and Culture - YouTube

Job Description

About the Job:
As an engineer in our R&D hardware design team, you will collaborate with manufacturing and engineering teams to design and implement Keysight’s state of the art measurement and calibration procedures and perform analyses to set specifications for all new products during development. You will have engineering responsibility for the product design as it is released into production and beyond. This is your opportunity to join a team that's bringing new products and technologies to the market faster and more efficiently than ever before!

About the Team:
Our R&D teams are multi-disciplinary, involving electrical, software, and mechanical engineers. You will be part of a product development team that collaborates closely with cross functional teams to design, develop, and test our new electronic circuit cards and maintain existing products for measurement in ICT platform.

Responsibilities:

• Develop and maintain FPGA designs using hardware description languages (HDLs) such as VHDL or Verilog, ensuring they meet the functional and performance requirements.
• Collaborate with system architects to define the system architecture and determine how the FPGA will interface with other components on the PCA board and choose an appropriate FPGA based on the project's requirements.
• Implement high-speed interfaces, such as DDR memory interfaces or high-speed data communication protocols, on the FPGA.
• Implement signal processing algorithms, both analog and digital, on the FPGA to process and analyze data from test and measurement sensors.
• Develop testbenches and perform simulation to verify the FPGA design. Conduct functional, timing, and performance tests on the PCA board to ensure it meets specifications.
• Use FPGA development tools to synthesize and implement the design onto the FPGA, considering resource utilization and timing constraints.
• Collaborate with PCB designers to ensure proper integration of the FPGA into the PCA board layout, taking into account signal integrity and power distribution.
• Implement calibration routines and algorithms to maintain the accuracy and reliability of measurement data.
• Develop algorithms for real-time data processing, including filtering, averaging, and statistical analysis.
• Collaborate with a team to test, validate, and debug analog and power circuits.
• Expertise in analog and power circuit design, along with schematic creation and PCB layout, to develop tailored solutions according to project requirements is an added advantage for this role.

Job Qualifications

• Bachelor/Master/PhD Degree in Computer Engineering or Electrical/Electronic engineering.
• Min 5 years working experience in R&D or similar product generation environment as electronic and FPGA firmware engineer.
• Strong proficiency in digital circuit design and FPGA firmware design.
• Extensive experience in reading and understanding electrical schematics, technical drawings, datasheets, and written work instructions.
• In-depth knowledge and experience in developing, testing and trouble-shooting circuit and FPGA firmware design.
• Good organizational skills and ability to thrive in a fast-paced, results-driven environment.
• Hands-on experience of lab-based debugging and validation of circuits.
• Self-motivated and capable of working independently while following high-level objectives.
• Demonstrated analytical problem-solving skills and excellent communication abilities.
• Proficiency in coding, synthesizing, and simulating VHDL and Verilog RTL implementations using Xilinx FPGA.

Desired Qualifications:
• Knowledge of general communication protocols, such as I2C, SPI, JTAG, UART.
• Familiarity with analog and digital test and measurement techniques.
• Experienced in using electronic test and measurement equipment for validating both analog and digital circuits.
• Experienced in design using Xilinx Spartan 7 FPGA and Intel FPGA Cyclone V SoC would be advantageous.
• Proficiency in FPGA firmware CAD design tools Vivado and Quartus.
• Proficiency in electronic circuit CAD design tools DxDesigner/Expedition.
• Understanding of hardware, firmware, and software/hardware interactions is highly desired.

Keysight is on the forefront of technology innovation, delivering breakthroughs and trusted insights to the world’s visionaries and innovators in electronic design, simulation, prototyping, test, manufacturing, and optimization. Our ~15,000 employees create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries. Our technical solutions – and our methods for creating them – help connect and secure the world. Learn more about what we do and how we do it.

Our powerful culture has led to us being independently recognized on Fortune 100’s Best Companies List and we are “Great Place to Work” Certified. We’re driven, collaborative, ethical, and curious, and we value all ideas, especially bold ones. And our culture extends far beyond our own walls. Our corporate social responsibility efforts support our communities, nurture the next generation of engineers, and promote environmental sustainability.

At Keysight, Inclusion, Equity & Diversity is an integral part of our core values. We believe that when people feel a sense of belonging, they can be more creative, innovative, and thrive at all points in their careers. We believe everyone should be respected in the workplace and in their communities regardless of race, color, age, gender, sexual orientation, gender identity and expression, ethnicity, religion, disability, veteran status, national origin, or any protected class. We continuously challenge ourselves to grow in our understanding of inclusion by engaging in a wide variety of diversity programs, initiatives, employee network groups and mentoring/development. This is Keysight – People and Culture - YouTube

Job Description

You will work as the lead engineer in a team of software engineers and electrical engineers developing Electronic Design Automation (EDA) simulation software through the Keysight/PSS Project lifecycle (PLC) from Concept to Shipment. Your products focus on the signal integrity market and you will be collaborating with other teams and working as a whole on our flagship product, the Advanced Design System (ADS).
We are seeking an experienced RnD electrical engineer with strong CS skills, experience in programming, experience working with High Speed serial standards (USB, PCIe, etc) and Memory Standards (DDR, HBM, etc) and experience in a technically leading other team members.

In this role, you will have the opportunity to:

• Research, design, and implement EDA software for Signal Integrity applications
• Technically lead teams to deliver quality products on time following the Agile software development process.
• Be the technical lead for a fully Agile software development team in a geographically distributed organization
• Collaborate with multi-functional product development teams to deliver solutions that enhance and complement our overall Signal Integrity EDA flow
• Lead by example and help grow a high-performance team and nurture a culture in software organization of quality, ownership, collaboration, continuous improvement, and data-driven decision making.
• Provide technical support to key customers
• Make technical presentation to senior management
• Research problems discovered by QA or Customers and provide products fixes
• Work independently with minimal supervision and may take on some planning and mentoring responsibilities.
• Perform complex development activities, including the design, implementation, maintenance, testing and documentation of software modules and sub-systems

Job Qualifications

The essential requirements of the job include:

• BS/MS/PhD in CS or EE
• 7+yrs of hands on experience in complex C/C++/Python software development in a role such as a software architect or senior software engineer or technical project lead
• Expert working knowledge of C++/Python and OOP
• Excellent oral and verbal communication skills
• Experience in geometry processing & simplification, EM simulation, high-frequency design, and S-parameters
• Experience in analysis of high-speed serial and/or DDR channels
• Great team player and willing to take on a variety of projects, customer issues, and quality fixes
• Solid understanding of Jenkins CI/CD development flows and impact of DevOps on architecture
• Passion for crafting efficient and reusable code

It would be a plus if you also possess:
• Prior experience in developing EDA software tools
• Knowledge of EDA tools and EDA flows