Total 358 construction engineer job vacancies in Singapore

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the photonic device fabrication based on Silicon-based material platforms (Silicon-on-Insulator, Silicon Nitride, Germanium (Ge), and SiGe), Lithium Niobate, and III-V semiconductor materials. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize integration flow for Silicon Nitride-based and Lithium Niobate-based photonic devices, including lithography, etching, deep-trench, and dicing.
• Design of experiments (DOE) for different process integration flows.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experiences in semiconductor industry, preferably in silicon photonic processes.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the photonic device fabrication based on Silicon-based material platforms (Silicon-on-Insulator, Silicon Nitride, Germanium (Ge), and SiGe), Lithium Niobate, and III-V semiconductor materials. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize integration flow for Silicon Nitride-based and Lithium Niobate-based photonic devices, including lithography, etching, deep-trench, and dicing.
• Design of experiments (DOE) for different process integration flows.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experiences in semiconductor industry, preferably in silicon photonic processes.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the development of heterogeneous integration process for realizing multi-functional photonic devices. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize die-to-wafer bonding process employing III-V semiconductor material, Lithium Niobate on Insulator (LNOI), and Si-based material platforms.
• Design of experiments (DOE) for various Die-to-Wafer (D2W) bonding methodologies.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experience in semiconductor industry is preferred. Those with strong familiarity with wafer-to-wafer and die-to-wafer bonding process may be considered for a senior position.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the development of heterogeneous integration process for realizing multi-functional photonic devices. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize die-to-wafer bonding process employing III-V semiconductor material, Lithium Niobate on Insulator (LNOI), and Si-based material platforms.
• Design of experiments (DOE) for various Die-to-Wafer (D2W) bonding methodologies.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experience in semiconductor industry is preferred. Those with strong familiarity with wafer-to-wafer and die-to-wafer bonding process may be considered for a senior position.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

ISCE2 is seeking a talented Research Engineer to be part of a young, dynamic, multi-disciplinary team to develop next generation green and sustainable technology for the biomanufacturing of fine and specialty chemicals. This position offers an opportunity to work enzyme and bioengineering to develop new enzymes for more streamlined manufacturing of complex molecules. The ideal candidate is passionate about science and sustainability, self-motivated, organised, detail-oriented, enjoy laboratory work, and has excellent communication and teamwork skills. The successful candidate may be responsible for but not limited to:

• Conduct experiments related to molecular biology, including molecular design and cloning
• Perform protein expression in bacterial systems, including molecular cloning, fermentation in bioreactors/shake flasks, and protein separation and immunoassays
• Design, plan and execute experiments based on proposed project scope
• Be comfortable with the use of technology to aid experiments
• Support screening, biocatalysts characterization and hits validation efforts
• Analyze data, interpret results and troubleshoot
• Presentation at regular project meetings and summarize results in reports
• Presentation and review of relevant literature
• Assist in the preparation of scientific communications, publications, figures and posters
• Perform general lab housekeeping
• Other duties as assigned by the manager

Requirements:

• BSc or Masters degree with some laboratory experience, preferably in Microbiology, Biotechnology, Chemical Engineering or Biological Engineering.
• Preferred hands-on experience with microbial culture.
• Experience with bioreactors will be advantageous.
• Preferred hands-on experience with molecular cloning and bioanalytical techniques, such as PCR, SDS-PAGE, LC-MS, Western blot, ELISA or other immunoassays, etc.
• Team player who is self-motivated and enjoy applied research work in a multidisciplinary environment
• Adaptable to team-oriented goals and requirements
• Good problem-solving skills
• Rigorous data analysis and interpretation skills
• Meticulous, attention to details and organized
• Excellent oral/written communication, documentation and organization skills
• Ability to prioritize responsibilities and multi-task

ISCE2 offers a challenging and rewarding work environment with opportunities for career development. If you are passionate about science and sustainability, and want to make a difference in the world, we encourage you to apply.

Job Description:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies.

We are seeking a Senior Engineer with system integration expertise with design oversight to join our team. As a vital member of our team, you will be involved in the design, development, and testing of medical devices, ensuring compliance with regulatory standards and industry best practices.

Your role will involve collaborating with cross-functional teams to create innovative solutions encompassing hardware, software and chemistry by conducting verification and validation activities, and providing technical support throughout the product lifecycle.

The ideal candidate will have a solid understanding of system integration principles, best practices in verification and validation testing, and knowledge of medical device regulations (such as ISO 13485).

Join our dynamic team and contribute to the development of cutting-edge medical devices that improve patient care and well-being.

Job Roles and Responsibilities:

• Develop high-level system architectures that meet user requirements while considering design feasibility.
• Ensure that all system components are compatible and can be integrated seamlessly.
• Design and implement integration strategies and validate the functions as intended while adhering to design principles.
• Lead collaborative teams for the design, implementation, and validation while is capable to perform hand-on testing independently if required to complete engineering or verification studies.
• Lead creating innovative solutions that align with both technical specification and user needs for medical products.
• Coordinate between design, engineering, assay, project manager, and other disciplines to ensure cohesive product development.
• Author or oversee the writing of protocols and reports.
• Foster collaboration among team members to address challenges from both a technical and design perspective.
• Creating and maintaining technical documentation, including design specifications, test protocols, and reports, ensuring compliance with regulatory requirements such as ISO 13485.

Job Requirements:

• Experience in system integration and innovation.
• Bachelor’s degree in Engineering, Design or equivalent engineering or science background.
• Comfortable with navigating uncertain situations without clear guideline.
• Adaptability to changing work conditions and project requirements.
• 5-10 years’ experience in cross-functional product development roles and completed one full product development cycle.
• Track record in working effectively with diverse teams, including engineering, design, and marketing.
• Strong interpersonal skills to facilitate communication between technical and non-technical stakeholders and ability to summarize and communicate complex problems in simple terms.
• Strong analytical skills to troubleshoot integration issues while considering design implications.
• Able to break down complex system in simple steps and identify interfaces between modules and generate system diagrams, workflows and reports.
• Curious and proactive approach to gather information necessary for decision-making.
• Knowledge of statistical tools for data analysis such as (Python/Matlab/Origin/LabView) will be a strong advantage.
• Experience with design software. Experience with CFD simulation software such as ANSYS is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

ISCE2 is seeking a talented Research Engineer to be part of a dynamic, multi-disciplinary team to develop next generation green and sustainable technology for the biomanufacturing of fine and specialty chemicals. This position offers an opportunity to work enzyme and bioengineering to develop new enzymes for more streamlined manufacturing of complex molecules. The ideal candidate is passionate about science and sustainability, self-motivated, organised, detail-oriented, enjoy laboratory work, and has excellent communication and teamwork skills. The successful candidate may be responsible for but not limited to:

• Conduct experiments related to molecular biology, including molecular design and cloning
• Perform protein expression in bacterial systems, including molecular cloning, fermentation in bioreactors/shake flasks, and protein separation and immunoassays
• Design, plan and execute experiments based on proposed project scope
• Be comfortable with the use of technology to aid experiments
• Support screening, biocatalysts characterization and hits validation efforts
• Analyze data, interpret results and troubleshoot
• Presentation at regular project meetings and summarize results in reports
• Presentation and review of relevant literature
• Assist in the preparation of scientific communications, publications, figures and posters
• Perform general lab housekeeping
• Other duties as assigned by the manager

Requirements:

• BSc or Masters degree with some laboratory experience, preferably in Microbiology, Biotechnology, Chemical Engineering or Biological Engineering.
• Preferred hands-on experience with microbial culture.
• Experience with bioreactors will be advantageous.
• Preferred hands-on experience with molecular cloning and bioanalytical techniques, such as PCR, SDS-PAGE, LC-MS, Western blot, ELISA or other immunoassays, etc.
• Team player who is self-motivated and enjoy applied research work in a multidisciplinary environment
• Adaptable to team-oriented goals and requirements
• Good problem-solving skills
• Rigorous data analysis and interpretation skills
• Meticulous, attention to details and organized
• Excellent oral/written communication, documentation and organization skills
• Ability to prioritize responsibilities and multi-task

ISCE2 offers a challenging and rewarding work environment with opportunities for career development. If you are passionate about science and sustainability, and want to make a difference in the world, we encourage you to apply.

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

A Senior/Principal Process Development Engineer is responsible for developing or overseeing the development of chemical processes including low carbon processes as well as monitoring, troubleshooting and optimizing processes in a pilot plant leading up to a technology transfer. He/she will perform process design, engineering and scale-up of in a Low-Carbon Technology Translational Testbed (LCT3) on Jurong Island leading up to a technology transfer. This role requires good understanding and knowledge of the underlying key process/chemical engineering and scientific principles of low carbon technologies and uses computer aided engineering tools such as simulators, process and plant engineering tools for process development and engineering. This individual thinks analytically to solve problems and improve existing methods and processes.

Key Accountabilities

• Responsible for providing scientific and technical direction and/or development, design, and scale up of carbon capture, utilisation and low carbon hydrogen technologies
• Responsible for developing new projects, including timelines, milestones, methodological approaches, expected results and necessary resources.
• Responsible for the executing or planning/directing of laboratory-based or pilot-based experiments to support process development, scale-up campaigns and process optimisation leading up to technology transfer
• Lead or support multi-disciplinary team of scientist and engineers through technical challenges and contribute to the successful completion of projects
• Supervise and mentor junior process development scientists and engineers

JOB REQUIREMENTS

• Doctorate or Master’s degree in Chemical or Mechanical or other related engineering fields.
• Possess at least 10 years of experience in process development and engineering with good knowledge on process control and safety in the process or chemical industry
• Excellent working knowledge on various process technologies, scale-up & scale-down and process intensification methodologies or principles
• Has good working experience with relevant computer aided engineering tools including simulation (eg. Aspen Plus, AVEVA, Gproms etc.), and the use of detailed process models to support process design, scale-up and process optimisation during operations
• Experience in collaborating and has good appreciation with other related disciplines eg. electrical and instrumentation, automation, process safety etc.
• Ability to plan and/or execute experiments at laboratory and pilot scale (scale-up/scale-down) to support process development, troubleshooting and optimisation
• Working experience in a chemical production facility and familiarity with regulations, codes and industry best practices would be a bonus
• Working experience in process/plant engineering tools (eg. AutoCAD process/plant engineering, Aucotec Engineering Base, etc.) would be a bonus
• Possess technical leadership quality to lead team and/or supervise junior engineers
• Possess strong interpersonal, oral and written communication and organization skills
• Self-driven and meticulous individual who has the strong ability to multi-task and has good time management skills to deliver results under tight timelines
• Excellent written and oral communication skills for the timely documentation, presentation, and discussion of results in a fast-paced, multidisciplinary, team-based environment

A Senior/Principal Process Development Engineer is responsible for developing or overseeing the development of chemical processes including low carbon processes as well as monitoring, troubleshooting and optimizing processes in a pilot plant leading up to a technology transfer. He/she will perform process design, engineering and scale-up of in a Low-Carbon Technology Translational Testbed (LCT3) on Jurong Island leading up to a technology transfer. This role requires good understanding and knowledge of the underlying key process/chemical engineering and scientific principles of low carbon technologies and uses computer aided engineering tools such as simulators, process and plant engineering tools for process development and engineering. This individual thinks analytically to solve problems and improve existing methods and processes.

Key Accountabilities

• Responsible for providing scientific and technical direction and/or development, design, and scale up of carbon capture, utilisation and low carbon hydrogen technologies
• Responsible for developing new projects, including timelines, milestones, methodological approaches, expected results and necessary resources.
• Responsible for the executing or planning/directing of laboratory-based or pilot-based experiments to support process development, scale-up campaigns and process optimisation leading up to technology transfer
• Lead or support multi-disciplinary team of scientist and engineers through technical challenges and contribute to the successful completion of projects
• Supervise and mentor junior process development scientists and engineers

JOB REQUIREMENTS

• Doctorate or Master’s degree in Chemical or Mechanical or other related engineering fields.
• Possess at least 10 years of experience in process development and engineering with good knowledge on process control and safety in the process or chemical industry
• Excellent working knowledge on various process technologies, scale-up & scale-down and process intensification methodologies or principles
• Has good working experience with relevant computer aided engineering tools including simulation (eg. Aspen Plus, AVEVA, Gproms etc.), and the use of detailed process models to support process design, scale-up and process optimisation during operations
• Experience in collaborating and has good appreciation with other related disciplines eg. electrical and instrumentation, automation, process safety etc.
• Ability to plan and/or execute experiments at laboratory and pilot scale (scale-up/scale-down) to support process development, troubleshooting and optimisation
• Working experience in a chemical production facility and familiarity with regulations, codes and industry best practices would be a bonus
• Working experience in process/plant engineering tools (eg. AutoCAD process/plant engineering, Aucotec Engineering Base, etc.) would be a bonus
• Possess technical leadership quality to lead team and/or supervise junior engineers
• Possess strong interpersonal, oral and written communication and organization skills
• Self-driven and meticulous individual who has the strong ability to multi-task and has good time management skills to deliver results under tight timelines
• Excellent written and oral communication skills for the timely documentation, presentation, and discussion of results in a fast-paced, multidisciplinary, team-based environment

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

SIMTech is looking for a highly motivated, independent, and innovative Software / DevOps engineer to join Sustainability Informatics & Strategy (SIS) Group. The successful candidate is expected to be creative and team-oriented, finding innovative solutions to new challenges and managing the software development life-cycle using Scrum / agile approaches. The candidate will work closely with other developers, UX designers, data scientists and engineers to deliver quality systems in a timely fashion.

JOB DESCRIPTION

The successful candidate is expected to contribute to Software Development and DevOps activities in the research area of sustainability, where they will be working alongside a team of full-stack developers, and with scientists and engineers, to perform tasks including:

• Design and develop backend web applications and database schemas
• Deploy, scale and configure cloud applications
• Manage source codes and maintain workflows for version control
• Fix and troubleshoot code issues and technical issues
• Perform program coding & testing in compliance with approved life cycle methodologies
• Resolve application-based issues through debugging, research, and investigation

JOB REQUIREMENT

• Degree in Computer Science/Engineering (or equivalent experience).
• Proficiency in at least two of the following:
• Frontend technologies and frameworks (i.e. React, Angular)
• Python web frameworks (e.g. FastAPI)
• SQL Databases, and ORMs (e.g. SQLAlchemy)
• Prior experience using source control systems, specifically Git. While in-depth knowledge of advanced features is not required, candidates should understand the basic functions such as committing changes, pushing to repositories, and pulling updates.
• Preference for candidates with working knowledge of DevOps (AWS Cloudformation/ IAM) and AWS Cloud Services (Cognito, Amplify, API Gateway, S3, RDS, Lambda)
• Preference for candidates with a basic understanding of Tableau for creating data visualizations. Training or coursework involving Tableau or similar data visualization tools is preferred, though hands-on professional experience is not required
• Ability and willingness to learn new technologies quickly
• Ability to communicate complex procedures to other colleagues
• Strong hands-on capabilities
• Diligent and possess a positive work attitude
• Good communication, writing and presentation skills

SIMTech is looking for a highly motivated, independent, and innovative Software / DevOps engineer to join Sustainability Informatics & Strategy (SIS) Group. The successful candidate is expected to be creative and team-oriented, finding innovative solutions to new challenges and managing the software development life-cycle using Scrum / agile approaches. The candidate will work closely with other developers, UX designers, data scientists and engineers to deliver quality systems in a timely fashion.

JOB DESCRIPTION

The successful candidate is expected to contribute to Software Development and DevOps activities in the research area of sustainability, where they will be working alongside a team of full-stack developers, and with scientists and engineers, to perform tasks including:

• Design and develop backend web applications and database schemas
• Deploy, scale and configure cloud applications
• Manage source codes and maintain workflows for version control
• Fix and troubleshoot code issues and technical issues
• Perform program coding & testing in compliance with approved life cycle methodologies
• Resolve application-based issues through debugging, research, and investigation

JOB REQUIREMENT

• Degree in Computer Science/Engineering (or equivalent experience).
• Proficiency in at least two of the following:
• Frontend technologies and frameworks (i.e. React, Angular)
• Python web frameworks (e.g. FastAPI)
• SQL Databases, and ORMs (e.g. SQLAlchemy)
• Prior experience using source control systems, specifically Git. While in-depth knowledge of advanced features is not required, candidates should understand the basic functions such as committing changes, pushing to repositories, and pulling updates.
• Preference for candidates with working knowledge of DevOps (AWS Cloudformation/ IAM) and AWS Cloud Services (Cognito, Amplify, API Gateway, S3, RDS, Lambda)
• Preference for candidates with a basic understanding of Tableau for creating data visualizations. Training or coursework involving Tableau or similar data visualization tools is preferred, though hands-on professional experience is not required
• Ability and willingness to learn new technologies quickly
• Ability to communicate complex procedures to other colleagues
• Strong hands-on capabilities
• Diligent and possess a positive work attitude
• Good communication, writing and presentation skills

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Responsibilities

• Support Project Manager on project documentation, system entries and ensuring compliance to project management process and best practices.
• Lead and maintain project management systems and tools
• Ensure compliance of project information and documentation in grant and project management systems.
• Consolidate and analyze project data and create project dashboards and reports
• Track and monitor project health
• Support other operational activities of the Project Management Office as required
• Responsible for managing the life cycle R&D projects and product delivery by planning, organizing, executing, and evaluating from conception to completion
• Ensure successful delivery of project scope and targets while managing project risk, quality, delivery, scope, schedule, and budget.
• Collaborate and motivate project team members in the design, development, and delivery of R&D solutions to customers.
• Drive design / process validation testing and ensure compliance to project lifecycle governance requirements
• Ability to demonstrate a good level of understanding of technical/engineering processes in managing the project development with the project teams
• Lead, monitor and report the progress of a few projects to all internal and external stakeholders.
• Manage and implement project changes and interventions to achieve project deliverables and mitigate risk.

Job Requirements

• Min. Diploma in Engineering or equivalent qualification
• Have some knowledge in project management
• Proficient in Microsoft Office, especially Microsoft excel and Microsoft Word and PowerPoint for presentation of information in a logical approach
• Ability to thrive within a fast-paced environment
• Able to work independently and as a team

Job Responsibilities

• Support Project Manager on project documentation, system entries and ensuring compliance to project management process and best practices.
• Lead and maintain project management systems and tools
• Ensure compliance of project information and documentation in grant and project management systems.
• Consolidate and analyze project data and create project dashboards and reports
• Track and monitor project health
• Support other operational activities of the Project Management Office as required
• Responsible for managing the life cycle R&D projects and product delivery by planning, organizing, executing, and evaluating from conception to completion
• Ensure successful delivery of project scope and targets while managing project risk, quality, delivery, scope, schedule, and budget.
• Collaborate and motivate project team members in the design, development, and delivery of R&D solutions to customers.
• Drive design / process validation testing and ensure compliance to project lifecycle governance requirements
• Ability to demonstrate a good level of understanding of technical/engineering processes in managing the project development with the project teams
• Lead, monitor and report the progress of a few projects to all internal and external stakeholders.
• Manage and implement project changes and interventions to achieve project deliverables and mitigate risk.

Job Requirements

• Min. Diploma in Engineering or equivalent qualification
• Have some knowledge in project management
• Proficient in Microsoft Office, especially Microsoft excel and Microsoft Word and PowerPoint for presentation of information in a logical approach
• Ability to thrive within a fast-paced environment
• Able to work independently and as a team

Job Description

As a (Senior) Research Engineer in our Robotics & Automation R&D team, you will play a role in conceptualizing, designing, and implementing intelligent robotics solutions that solve challenges across various industries. Leveraging your expertise in robotics, computer vision, AI, and ROS, etc., you will contribute to the development of next-generation robotic platforms that exhibit advanced perception, cognition, and decision-making capabilities. As we continue to expand our horizons, we are seeking a talented Research Engineer to join our dynamic team.

Responsibilities:

• Algorithm Development: Design and implement algorithms for robot perception, 2D/3D scene understanding, localization and planning to improve the intelligence of robot for addressing the real-world tasks.
• AI and Learning: Develop, integrate, and deploy advance AI models for various robot tasks such as 2D/3D detection, self-learning, to enhance autonomy for robot tasks such as pick and place, assembly, etc.
• Robot Planning and Control: Develop robot motion/trajectory planning and control solution using tools such as ROS1/ROS2, MoveIt, Nvidia Issac, etc for robot simulation and control.
• Prototype Development: Build and iterate on prototypes to validate algorithms and concepts in real-world robotic applications, ensuring robustness and scalability.

Job Requirements

• Bachelor’s or Master’s degree holder in Engineering, Robotics, Automation, Computer or related fields.
• Strong programming skills in languages such as Python, C++, and familiarity with software development best practices.
• Experience in deep learning frameworks (e.g., TensorFlow, PyTorch) and experience with Robot Operation System (ROS).
• Enthusiasm for learning and adapting to new technologies and areas, with a proactive approach to skill development.

Job Description:

CPPS group is seeking a highly motivated, independent and creative research engineer to deliver impactful and innovative AI-based digital technologies for predictive/prescriptive analytics and decision support. The candidate will work with a multidisciplinary team of scientists and engineers to translate problems faced by industry into opportunities to develop and deploy deep tech in AI.

The key roles & responsibilities include, but are not limited to the following:

• Co-develop AI models to enhance and automate decision making
• Work with a team of scientist and engineers to execute deliverables for industry projects
• Engage companies to understand their challenges and translate to research collaborations in AI
• Contribute to research and development in Cyber-Physical Production System technologies, including technology development, live production environment test-bedding and technology transfer of robust algorithms to industry
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with Industry 4.0 standards and concepts is an advantage

Job Requirement:

• Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, Mechanical Engineering, or a related field.
• Candidates with an ambition and attitude for cutting-edge research are welcome to apply.
• Strong understanding of machine learning algorithms, statistical analysis, and data preprocessing techniques
• Experience with machine learning frameworks and libraries, such as TensorFlow, Keras, PyTorch, or Scikit-learn
• Excellent verbal and written communication skills
• Quality focused and customer-centric
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Job Description:

The CPPS group is seeking a highly motivated senior research engineer or lead research engineer to lead and conduct R&D in Industry 5.0 smart manufacturing solutions and integrating digital technologies with AI-enabled physical production systems that promote human-centricity, environmental sustainability, and value chain resilience in manufacturing. The ideal candidate should have a strong background in controls, integration and PLC programming. The key roles & responsibilities include, but are not limited to the following:

• Conduct R&D in novel adaptive and autonomous control algorithms for scalable self-learning, self-optimizing and self-recovery production systems
• Work with a team of engineers and scientist to design and implement integrated IIOT and AI-enabled production systems for smart manufacturing
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with industry communication protocols such as OPC-UA, MQTT, Profibus, and RS-232 is an advantage

Job Requirement:

• Masters or Bachelor degree in Computer Science / Engineering, Electrical Engineering, Mechanical Engineering, with emphasis on controls, integration and automation
• 1-3 years experience in industry and/or R&D projects in the area of controls and IIOT (min. 5 years for Lead Research Engineer).
• Develop and program PLCs and other control systems, utilizing platforms like TwinCAT, EcoStruxure, Codesys and others.
• Ability to apprehend and/or interpret electrical circuit diagrams is a strong advantage
• Excellent technical presentation and writing skills
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Job Description:

CPPS group is seeking a highly motivated, independent and creative research engineer to deliver impactful and innovative AI-based digital technologies for predictive/prescriptive analytics and decision support. The candidate will work with a multidisciplinary team of scientists and engineers to translate problems faced by industry into opportunities to develop and deploy deep tech in AI.

The key roles & responsibilities include, but are not limited to the following:

• Co-develop AI models to enhance and automate decision making
• Work with a team of scientist and engineers to execute deliverables for industry projects
• Engage companies to understand their challenges and translate to research collaborations in AI
• Contribute to research and development in Cyber-Physical Production System technologies, including technology development, live production environment test-bedding and technology transfer of robust algorithms to industry
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with Industry 4.0 standards and concepts is an advantage

Job Requirement:

• Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, Mechanical Engineering, or a related field
• Candidates with an ambition and attitude for cutting-edge research are welcome to apply
• Strong understanding of machine learning algorithms, statistical analysis, and data preprocessing techniques
• Experience with machine learning frameworks and libraries, such as TensorFlow, Keras, PyTorch, or Scikit-learn
• Excellent verbal and written communication skills
• Quality focused and customer-centric
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively

Job Description:

CPPS group is seeking a highly motivated, independent and creative research engineer to deliver impactful and innovative AI-based digital technologies for predictive/prescriptive analytics and decision support. The candidate will work with a multidisciplinary team of scientists and engineers to translate problems faced by industry into opportunities to develop and deploy deep tech in AI.

The key roles & responsibilities include, but are not limited to the following:

• Co-develop AI models to enhance and automate decision making
• Work with a team of scientist and engineers to execute deliverables for industry projects
• Engage companies to understand their challenges and translate to research collaborations in AI
• Contribute to research and development in Cyber-Physical Production System technologies, including technology development, live production environment test-bedding and technology transfer of robust algorithms to industry
• Understand autonomous manufacturing domain and provide innovative solutions to industry problems in this area
• Familiarity with Industry 4.0 standards and concepts is an advantage

Job Requirement:

• Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, Mechanical Engineering, or a related field
• Candidates with an ambition and attitude for cutting-edge research are welcome to apply
• Strong understanding of machine learning algorithms, statistical analysis, and data preprocessing techniques
• Experience with machine learning frameworks and libraries, such as TensorFlow, Keras, PyTorch, or Scikit-learn
• Excellent verbal and written communication skills
• Quality focused and customer-centric
• Can-do attitude and able to work with different needs of various stakeholders
• Proactive team player and technically motivated to solve problems innovatively